1 files changed, 0 insertions, 81 deletions
diff --git a/c/src/lib/libbsp/powerpc/virtex/README b/c/src/lib/libbsp/powerpc/virtex/README
deleted file mode 100644
index 7dbc7f5a0e..0000000000
--- a/c/src/lib/libbsp/powerpc/virtex/README
+++ /dev/null
@@ -1,81 +0,0 @@
-# Adapted from vitex BSP
-
-BSP NAME:           Virtex
-BOARD:              Xilinx ML-403 and (hopefully) any vitex/PPC based board
-BUS:                N/A
-CPU FAMILY:         ppc
-CPU:                PowerPC 405GP
-COPROCESSORS:       N/A
-MODE:               32 bit mode
-
-DEBUG MONITOR:
-
-PERIPHERALS
-===========
-TIMERS:             405GP internal
-SERIAL PORTS:       Xilinx consolelite
-REAL-TIME CLOCK:    none
-DMA:                Xilinx vitex internal
-VIDEO:              none
-SCSI:               none
-NETWORKING:         Xilinx TEMAC
-
-DRIVER INFORMATION
-==================
-CLOCK DRIVER:       PPC Decrementer
-IOSUPP DRIVER:      N/A
-SHMSUPP:            N/A
-TIMER DRIVER:       N/A
-TTY DRIVER:         consoleelite
-
-STDIO
-=====
-PORT:               Console port 0
-ELECTRICAL:         RS-232
-BAUD:               as defined in FPGA design
-BITS PER CHARACTER: 8
-PARITY:             None
-STOP BITS:          1
-
-Notes
-=====
-
-Board description
------------------
-clock rate:	234 MHz
-ROM:		16MByte FLASH
-RAM:		64MByte DRAM
-
-Virtex only supports single processor operations.
-
-Configuration
--------------
-
-This board support package is written for a typical virtex/PPC FPGA
-system. The rough features of such a board are described above.
-
-When a new virtex FPGA system is created (using the Xilinx design
-software), a parameter file "xparameters.h" is also created, which
-describes the basic features of the hardware (like peripherals
-included, interrupt routing etc.).
-
-This BSP normally takes its basic HW description for the file
-"xparameters_dflt.h", which describes my FPGA system. When this BSP
-should run on a different hardware, a path to the proper
-"xparameters.h" can be provided on the "configure" command line.
-
-For adapting this BSP to other boards, you can specify several configuration
-options at the configure command line (use "./configure --help" in this
-directory).  Here is an example for the top-level configure invocation:
-
-/path/to/rtems/sources/configure \
-  --target=powerpc-rtems4.11 \
-  --enable-rtemsbsp=virtex \
-  --enable-maintainer-mode \
-  --enable-posix \
-  --enable-tests \
-  --disable-networking \
-  'RTEMS_XPARAMETERS_H="/path/to/xparameters.h"' \
-  VIRTEX_RAM_ORIGIN=0xfffc0000 \
-  VIRTEX_RAM_LENGTH=0x3ffec \
-  VIRTEX_RESET_ORIGIN=0xffffffec