diff options
Diffstat (limited to 'c/src/lib/libbsp/powerpc/shared/startup/bspstart.c')
-rw-r--r-- | c/src/lib/libbsp/powerpc/shared/startup/bspstart.c | 338 |
1 files changed, 338 insertions, 0 deletions
diff --git a/c/src/lib/libbsp/powerpc/shared/startup/bspstart.c b/c/src/lib/libbsp/powerpc/shared/startup/bspstart.c new file mode 100644 index 0000000000..63181b603d --- /dev/null +++ b/c/src/lib/libbsp/powerpc/shared/startup/bspstart.c @@ -0,0 +1,338 @@ +/* + * This routine starts the application. It includes application, + * board, and monitor specific initialization and configuration. + * The generic CPU dependent initialization has been performed + * before this routine is invoked. + * + * COPYRIGHT (c) 1989-1998. + * On-Line Applications Research Corporation (OAR). + * Copyright assigned to U.S. Government, 1994. + * + * The license and distribution terms for this file may be + * found in the file LICENSE in this distribution or at + * http://www.OARcorp.com/rtems/license.html. + * + * Modified to support the MCP750. + * Modifications Copyright (C) 1999 Eric Valette. valette@crf.canon.fr + * + * $Id$ + */ + +#include <bsp.h> +#include <rtems/libio.h> +#include <libcsupport.h> +#include <string.h> +#include <bsp/consoleIo.h> +#include <libcpu/spr.h> +#include <bsp/residual.h> +#include <bsp/pci.h> +#include <bsp/openpic.h> +#include <bsp/irq.h> +#include <bsp.h> +#include <libcpu/bat.h> +#include <bsp/vectors.h> +#include <bsp/motorola.h> + +extern void _return_to_ppcbug(); +extern unsigned long __rtems_end; +extern unsigned long _end; +extern unsigned long __bss_start; +extern void L1_caches_enables(); +extern unsigned get_L2CR(); +extern void set_L2CR(unsigned); +extern void bsp_cleanup(void); +/* + * Copy of residuals passed by firmware + */ +RESIDUAL residualCopy; +/* + * Copy Additional boot param passed by boot loader + */ +#define MAX_LOADER_ADD_PARM 80 +char loaderParam[MAX_LOADER_ADD_PARM]; +/* + * Vital Board data Start using DATA RESIDUAL + */ +/* + * Total memory using RESIDUAL DATA + */ +unsigned int BSP_mem_size; +/* + * PCI Bus Frequency + */ +unsigned int BSP_bus_frequency; +/* + * processor clock frequency + */ +unsigned int BSP_processor_frequency; +/* + * Time base divisior (how many tick for 1 second). + */ +unsigned int BSP_time_base_divisor; +/* + * system init stack and soft ir stack size + */ +#define INIT_STACK_SIZE 0x1000 +#define INTR_STACK_SIZE 0x4000 + +void BSP_panic(char *s) +{ + printk("RTEMS 4.x PANIC %s\n", s); + _return_to_ppcbug(); +} + +void _BSP_Fatal_error(unsigned int v) +{ + printk("RTEMS 4.x PANIC ERROR %x\n", v); + _return_to_ppcbug(); +} + +/* + * The original table from the application and our copy of it with + * some changes. + */ + +extern rtems_configuration_table Configuration; + +rtems_configuration_table BSP_Configuration; + +rtems_cpu_table Cpu_table; + +char *rtems_progname; + +/* + * Use the shared implementations of the following routines + */ + +void bsp_postdriver_hook(void); +void bsp_libc_init( void *, unsigned32, int ); + +/* + * Function: bsp_pretasking_hook + * Created: 95/03/10 + * + * Description: + * BSP pretasking hook. Called just before drivers are initialized. + * Used to setup libc and install any BSP extensions. + * + * NOTES: + * Must not use libc (to do io) from here, since drivers are + * not yet initialized. + * + */ + +void bsp_pretasking_hook(void) +{ + rtems_unsigned32 heap_start; + rtems_unsigned32 heap_size; + + heap_start = ((rtems_unsigned32) &__rtems_end) +INIT_STACK_SIZE + INTR_STACK_SIZE; + if (heap_start & (CPU_ALIGNMENT-1)) + heap_start = (heap_start + CPU_ALIGNMENT) & ~(CPU_ALIGNMENT-1); + + heap_size = (BSP_mem_size - heap_start) - BSP_Configuration.work_space_size; + +#ifdef SHOW_MORE_INIT_SETTINGS + printk(" HEAP start %x size %x\n", heap_start, heap_size); +#endif + bsp_libc_init((void *) heap_start, heap_size, 0); + +#ifdef RTEMS_DEBUG + rtems_debug_enable( RTEMS_DEBUG_ALL_MASK ); +#endif +} + +void zero_bss() +{ + memset(&__bss_start, 0, ((unsigned) (&__rtems_end)) - ((unsigned) &__bss_start)); +} + +void save_boot_params(RESIDUAL* r3, void *r4, void* r5, char *additional_boot_options) +{ + + residualCopy = *r3; + strncpy(loaderParam, additional_boot_options, MAX_LOADER_ADD_PARM); + loaderParam[MAX_LOADER_ADD_PARM - 1] ='\0'; +} + +/* + * bsp_start + * + * This routine does the bulk of the system initialization. + */ + +void bsp_start( void ) +{ + int err; + unsigned char *stack; + unsigned l2cr; + register unsigned char* intrStack; + register unsigned int intrNestingLevel = 0; + unsigned char *work_space_start; + ppc_cpu_id_t myCpu; + ppc_cpu_revision_t myCpuRevision; + prep_t boardManufacturer; + motorolaBoard myBoard; + /* + * Get CPU identification dynamically. Note that the get_ppc_cpu_type() function + * store the result in global variables so that it can be used latter... + */ + myCpu = get_ppc_cpu_type(); + myCpuRevision = get_ppc_cpu_revision(); + /* + * enables L1 Cache. Note that the L1_caches_enables() codes checks for + * relevant CPU type so that the reason why there is no use of myCpu... + */ + L1_caches_enables(); + /* + * Enable L2 Cache. Note that the set_L2CR(L2CR) codes checks for + * relevant CPU type (mpc750)... + */ + l2cr = get_L2CR(); +#ifdef SHOW_LCR2_REGISTER + printk("Initial L2CR value = %x\n", l2cr); +#endif + if ( (! (l2cr & 0x80000000)) && ((int) l2cr == -1)) + set_L2CR(0xb9A14000); + /* + * the initial stack has aready been set to this value in start.S + * so there is no need to set it in r1 again... It is just for info + * so that It can be printed without accessing R1. + */ + stack = ((unsigned char*) &__rtems_end) + INIT_STACK_SIZE - CPU_MINIMUM_STACK_FRAME_SIZE; + /* + * Initialize the interrupt related settings + * SPRG0 = interrupt nesting level count + * SPRG1 = software managed IRQ stack + * + * This could be done latter (e.g in IRQ_INIT) but it helps to understand + * some settings below... + */ + intrStack = ((unsigned char*) &__rtems_end) + INIT_STACK_SIZE + INTR_STACK_SIZE - CPU_MINIMUM_STACK_FRAME_SIZE; + asm volatile ("mtspr 273, %0" : "=r" (intrStack) : "0" (intrStack)); + asm volatile ("mtspr 272, %0" : "=r" (intrNestingLevel) : "0" (intrNestingLevel)); + /* + * Initialize default raw exception hanlders. See vectors/vectors_init.c + */ + initialize_exceptions(); + /* + * Init MMU block address translation to enable hardware + * access + */ + /* + * PC legacy IO space used for inb/outb and all PC + * compatible hardware + */ + setdbat(1, 0x80000000, 0x80000000, 0x10000000, IO_PAGE); + /* + * PCI devices memory area. Needed to access OPENPIC features + * provided by the RAVEN + */ + setdbat(2, 0xc0000000, 0xc0000000, 0x08000000, IO_PAGE); + /* + * Must have acces to open pic PCI ACK registers + * provided by the RAVEN + */ + setdbat(3, 0xfeff0000, 0xfeff0000, 0x10000, IO_PAGE); + + select_console(CONSOLE_LOG); + + /* We check that the keyboard is present and immediately + * select the serial console if not. + */ + err = kbdreset(); + if (err) select_console(CONSOLE_SERIAL); + + boardManufacturer = checkPrepBoardType(&residualCopy); + if (boardManufacturer != PREP_Motorola) { + printk("Unsupported hardware vendor\n"); + while (1); + } + myBoard = getMotorolaBoard(); + + printk("-----------------------------------------\n"); + printk("Welcome to %s on %s\n", _RTEMS_version, motorolaBoardToString(myBoard)); + printk("-----------------------------------------\n"); +#ifdef SHOW_MORE_INIT_SETTINGS + printk("Residuals are located at %x\n", (unsigned) &residualCopy); + printk("Additionnal boot options are %s\n", loaderParam); + printk("Initial system stack at %x\n",stack); + printk("Software IRQ stack at %x\n",intrStack); + printk("-----------------------------------------\n"); +#endif + +#ifdef TEST_RETURN_TO_PPCBUG + printk("Hit <Enter> to return to PPCBUG monitor\n"); + printk("When Finished hit GO. It should print <Back from monitor>\n"); + debug_getc(); + _return_to_ppcbug(); + printk("Back from monitor\n"); + _return_to_ppcbug(); +#endif /* TEST_RETURN_TO_PPCBUG */ + +#ifdef SHOW_MORE_INIT_SETTINGS + printk("Going to start PCI buses scanning and initialization\n"); +#endif + InitializePCI(); +#ifdef SHOW_MORE_INIT_SETTINGS + printk("Number of PCI buses found is : %d\n", BusCountPCI()); +#endif +#ifdef TEST_RAW_EXCEPTION_CODE + printk("Testing exception handling Part 1\n"); + /* + * Cause a software exception + */ + __asm__ __volatile ("sc"); + /* + * Check we can still catch exceptions and returned coorectly. + */ + printk("Testing exception handling Part 2\n"); + __asm__ __volatile ("sc"); +#endif + + + BSP_mem_size = residualCopy.TotalMemory; + BSP_bus_frequency = residualCopy.VitalProductData.ProcessorBusHz; + BSP_processor_frequency = residualCopy.VitalProductData.ProcessorHz; + BSP_time_base_divisor = (residualCopy.VitalProductData.TimeBaseDivisor? + residualCopy.VitalProductData.TimeBaseDivisor : 4000); + + /* + * Set up our hooks + * Make sure libc_init is done before drivers initialized so that + * they can use atexit() + */ + + Cpu_table.pretasking_hook = bsp_pretasking_hook; /* init libc, etc. */ + Cpu_table.postdriver_hook = bsp_postdriver_hook; + Cpu_table.do_zero_of_workspace = TRUE; + Cpu_table.interrupt_stack_size = INTR_STACK_SIZE; + Cpu_table.clicks_per_usec = BSP_processor_frequency/(BSP_time_base_divisor * 1000); + Cpu_table.exceptions_in_RAM = TRUE; + +#ifdef SHOW_MORE_INIT_SETTINGS + printk("BSP_Configuration.work_space_size = %x\n", BSP_Configuration.work_space_size); +#endif + work_space_start = + (unsigned char *)BSP_mem_size - BSP_Configuration.work_space_size; + + if ( work_space_start <= ((unsigned char *)&__rtems_end) + INIT_STACK_SIZE + INTR_STACK_SIZE) { + printk( "bspstart: Not enough RAM!!!\n" ); + bsp_cleanup(); + } + + BSP_Configuration.work_space_start = work_space_start; + + /* + * Account for the console's resources + */ + + console_reserve_resources( &BSP_Configuration ); + /* + * Initalize RTEMS IRQ system + */ + BSP_rtems_irq_mng_init(0); +#ifdef SHOW_MORE_INIT_SETTINGS + printk("Exit from bspstart\n"); +#endif +} |