summaryrefslogtreecommitdiffstats
path: root/c/src/lib/libbsp/powerpc/mpc8260ads/configure.ac
diff options
context:
space:
mode:
Diffstat (limited to 'c/src/lib/libbsp/powerpc/mpc8260ads/configure.ac')
-rw-r--r--c/src/lib/libbsp/powerpc/mpc8260ads/configure.ac69
1 files changed, 0 insertions, 69 deletions
diff --git a/c/src/lib/libbsp/powerpc/mpc8260ads/configure.ac b/c/src/lib/libbsp/powerpc/mpc8260ads/configure.ac
deleted file mode 100644
index b9bce068a6..0000000000
--- a/c/src/lib/libbsp/powerpc/mpc8260ads/configure.ac
+++ /dev/null
@@ -1,69 +0,0 @@
-## Process this file with autoconf to produce a configure script.
-
-AC_PREREQ([2.69])
-AC_INIT([rtems-c-src-lib-libbsp-powerpc-mpc8260ads],[_RTEMS_VERSION],[https://devel.rtems.org/newticket])
-RTEMS_TOP(../../../../../..)
-RTEMS_SOURCE_TOP
-RTEMS_BUILD_TOP
-RTEMS_BSP_LINKCMDS
-
-RTEMS_CANONICAL_TARGET_CPU
-AM_INIT_AUTOMAKE([no-define nostdinc foreign 1.12.2])
-RTEMS_BSP_CONFIGURE
-
-
-RTEMS_BSPOPTS_SET_DATA_CACHE_ENABLED([*],[])
-RTEMS_BSPOPTS_HELP_DATA_CACHE_ENABLED
-
-RTEMS_BSPOPTS_SET_INSTRUCTION_CACHE_ENABLED([*],[])
-RTEMS_BSPOPTS_HELP_INSTRUCTION_CACHE_ENABLED
-
-RTEMS_BSPOPTS_SET([UARTS_USE_TERMIOS],[*],[0])
-RTEMS_BSPOPTS_HELP([UARTS_USE_TERMIOS],
-[Define to 1 if you want termios support for every port.
- Termios support is independent of the choice of UART I/O mode.])
-
-RTEMS_BSPOPTS_SET([CONSOLE_MINOR],[*],[SCC2_MINOR])
-RTEMS_BSPOPTS_HELP([CONSOLE_MINOR],
-[(BSP--console driver) Must be defined to be one of SMC1_MINOR,
- SMC2_MINOR, SCC2_MINOR, SCC3_MINOR, or SCC4_MINOR.
- Determines which device will be registered as /dev/console.])
-
-RTEMS_BSPOPTS_SET([UARTS_IO_MODE],[*],[0])
-RTEMS_BSPOPTS_HELP([UARTS_IO_MODE],
-[(BSP--console driver)
- Define to 0 or 1 if you want polled I/O performed by RTEMS.
- Define to 1 if you want interrupt-driven performed by RTEMS.
- Define to 2 if you want polled I/O performed by EPPCBug.
- There is no provision to have a mix of interrupt-driven and polled I/O
- ports, except that the printk port may use a different mode from the
- other ports. If this is done, do not open the printk port from an RTEMS
- application. With EPPCBug 1.1, if mode 2 is selected, CONSOLE_MINOR
- must be set to SMC1_MINOR. This is a deficiency of the firmware: it
- does not perform serial I/O on any port other than its default debug
- port, which must be SMC1.])
-
-RTEMS_BSPOPTS_SET([PRINTK_MINOR],[*],[SMC2_MINOR])
-RTEMS_BSPOPTS_HELP([PRINTK_MINOR],
-[(BSP--console driver)
- Must be defined to be one of SMC1_MINOR, SMC2_MINOR, SCC2_MINOR,
- SCC3_MINOR, or SCC4_MINOR. Determines which device is used for output
- by printk(). If the port that printk() uses is also used for other
- I/O (e.g. if PRINTK_MINOR == \$CONSOLE_MINOR), then both ports should
- use the same type of I/O, otherwise the drivers will likely conflict with
- each other.])
-
-RTEMS_BSPOPTS_SET([DISPATCH_HANDLER_STAT],[*],[])
-RTEMS_BSPOPTS_HELP([DISPATCH_HANDLER_STAT],
-[used by irq/irq.c])
-
-AC_DEFINE(mpc8260, 1, [PowerPC model option])
-
-RTEMS_BSP_CLEANUP_OPTIONS
-
-# Explicitly list a Makefile here
-AC_CONFIG_FILES([Makefile])
-
-RTEMS_PPC_EXCEPTIONS
-
-AC_OUTPUT