diff options
Diffstat (limited to 'c/src/lib/libbsp/powerpc/mpc55xxevb/configure.ac')
| -rw-r--r-- | c/src/lib/libbsp/powerpc/mpc55xxevb/configure.ac | 225 |
1 files changed, 0 insertions, 225 deletions
diff --git a/c/src/lib/libbsp/powerpc/mpc55xxevb/configure.ac b/c/src/lib/libbsp/powerpc/mpc55xxevb/configure.ac deleted file mode 100644 index 809fcd14f2..0000000000 --- a/c/src/lib/libbsp/powerpc/mpc55xxevb/configure.ac +++ /dev/null @@ -1,225 +0,0 @@ -## -# -# @file -# -# @ingroup mpc55xx_config -# -# @brief Configure script of LibBSP for the MPC55xx evaluation boards. -# - -AC_PREREQ([2.69]) -AC_INIT([rtems-c-src-lib-libbsp-powerpc-mpc55xxevb],[_RTEMS_VERSION],[https://devel.rtems.org/newticket]) -RTEMS_TOP(../../../../../..) -RTEMS_SOURCE_TOP -RTEMS_BUILD_TOP -RTEMS_BSP_LINKCMDS - -RTEMS_CANONICAL_TARGET_CPU -AM_INIT_AUTOMAKE([no-define nostdinc foreign 1.12.2]) -RTEMS_BSP_CONFIGURE - - - -RTEMS_BSPOPTS_SET_DATA_CACHE_ENABLED([gwlcfm],[]) -RTEMS_BSPOPTS_SET_DATA_CACHE_ENABLED([mpc5643l*],[]) -RTEMS_BSPOPTS_SET_DATA_CACHE_ENABLED([*],[1]) -RTEMS_BSPOPTS_HELP_DATA_CACHE_ENABLED - -RTEMS_BSPOPTS_SET_INSTRUCTION_CACHE_ENABLED([gwlcfm],[]) -RTEMS_BSPOPTS_SET_INSTRUCTION_CACHE_ENABLED([*],[1]) -RTEMS_BSPOPTS_HELP_INSTRUCTION_CACHE_ENABLED - -RTEMS_BSPOPTS_SET([BSP_DATA_CACHE_USE_WRITE_THROUGH],[mpc5674f_ecu508*],[1]) -RTEMS_BSPOPTS_SET([BSP_DATA_CACHE_USE_WRITE_THROUGH],[*],[]) -RTEMS_BSPOPTS_HELP([BSP_DATA_CACHE_USE_WRITE_THROUGH], -[use write-through for data cache]) - -RTEMS_BSPOPTS_SET([PPC_EXC_CONFIG_USE_FIXED_HANDLER],[*],[1]) -RTEMS_BSPOPTS_HELP([PPC_EXC_CONFIG_USE_FIXED_HANDLER], -[use fixed high-level exception handler]) - -RTEMS_BSPOPTS_SET([PPC_EXC_CONFIG_BOOKE_ONLY],[*],[1]) -RTEMS_BSPOPTS_HELP([PPC_EXC_CONFIG_BOOKE_ONLY], -[only support Book E exception types]) - -RTEMS_BSPOPTS_SET([BSP_INTERRUPT_HANDLER_TABLE_SIZE],[mpc5643l*],[127]) -RTEMS_BSPOPTS_SET([BSP_INTERRUPT_HANDLER_TABLE_SIZE],[mpc5566*],[127]) -RTEMS_BSPOPTS_SET([BSP_INTERRUPT_HANDLER_TABLE_SIZE],[mpc5674f*],[255]) -RTEMS_BSPOPTS_SET([BSP_INTERRUPT_HANDLER_TABLE_SIZE],[*],[63]) -RTEMS_BSPOPTS_HELP([BSP_INTERRUPT_HANDLER_TABLE_SIZE], -[defines the maximum number of interrupt handlers]) - -RTEMS_BSPOPTS_SET([MPC55XX_CONSOLE_MINOR],[mpc5674f_ecu508*],[2]) -RTEMS_BSPOPTS_SET([MPC55XX_CONSOLE_MINOR],[*],[0]) -RTEMS_BSPOPTS_HELP([MPC55XX_CONSOLE_MINOR], -[determines which serial device will be registered as /dev/console]) - -RTEMS_BSPOPTS_SET([BSP_DEFAULT_BAUD_RATE],[*],[115200]) -RTEMS_BSPOPTS_HELP([BSP_DEFAULT_BAUD_RATE], -[default console baud]) - -RTEMS_BSPOPTS_SET([MPC55XX_ESCI_USE_INTERRUPTS],[*],[1]) -RTEMS_BSPOPTS_HELP([MPC55XX_ESCI_USE_INTERRUPTS], -[define to zero or one to disable or enable interrupts for the eSCI devices]) - -RTEMS_BSPOPTS_SET([MPC55XX_REFERENCE_CLOCK],[gwlcfm],[40000000]) -RTEMS_BSPOPTS_SET([MPC55XX_REFERENCE_CLOCK],[mpc5643l_evb*],[40000000]) -RTEMS_BSPOPTS_SET([MPC55XX_REFERENCE_CLOCK],[mpc5668g*],[25000000]) -RTEMS_BSPOPTS_SET([MPC55XX_REFERENCE_CLOCK],[mpc5674f*],[40000000]) -RTEMS_BSPOPTS_SET([MPC55XX_REFERENCE_CLOCK],[*],[8000000]) -RTEMS_BSPOPTS_HELP([MPC55XX_REFERENCE_CLOCK], -[Must be defined to be the external reference clock (in Hz) - for clock generation]) - -RTEMS_BSPOPTS_SET([MPC55XX_SYSTEM_CLOCK],[gwlcfm],[66000000]) -RTEMS_BSPOPTS_SET([MPC55XX_SYSTEM_CLOCK],[mpc5668g*],[116000000]) -RTEMS_BSPOPTS_SET([MPC55XX_SYSTEM_CLOCK],[mpc5674f*],[264000000]) -RTEMS_BSPOPTS_SET([MPC55XX_SYSTEM_CLOCK],[*] ,[128000000]) -RTEMS_BSPOPTS_HELP([MPC55XX_SYSTEM_CLOCK], -[The system clock frequency in Hz.]) - -RTEMS_BSPOPTS_SET([MPC55XX_FMPLL_PREDIV],[gwlcfm],[10]) -RTEMS_BSPOPTS_SET([MPC55XX_FMPLL_PREDIV],[mpc5668g*],[6]) -RTEMS_BSPOPTS_SET([MPC55XX_FMPLL_PREDIV],[mpc5674f*],[5]) -RTEMS_BSPOPTS_SET([MPC55XX_FMPLL_PREDIV],[*] ,[1]) -RTEMS_BSPOPTS_HELP([MPC55XX_FMPLL_PREDIV], -[Must be defined to be the PLL predivider factor for clock generation]) - -RTEMS_BSPOPTS_SET([MPC55XX_FMPLL_MFD],[gwlcfm],[99]) -RTEMS_BSPOPTS_SET([MPC55XX_FMPLL_MFD],[mpc5668g*],[111]) -RTEMS_BSPOPTS_SET([MPC55XX_FMPLL_MFD],[mpc5674f*],[66]) -RTEMS_BSPOPTS_SET([MPC55XX_FMPLL_MFD],[*] ,[12]) -RTEMS_BSPOPTS_HELP([MPC55XX_FMPLL_MFD], -[Must be defined to be the PLL multiplication factor for clock generation]) - -RTEMS_BSPOPTS_SET([MPC55XX_FMPLL_ESYNCR1_CLKCFG],[mpc5674f_rsm6],[6]) -RTEMS_BSPOPTS_SET([MPC55XX_FMPLL_ESYNCR1_CLKCFG],[*],[7]) -RTEMS_BSPOPTS_HELP([MPC55XX_FMPLL_ESYNCR1_CLKCFG], -[the FMPLL ESYNCR1[CLKCFG] value]) - -RTEMS_BSPOPTS_SET([MPC55XX_SYSTEM_CLOCK_DIVIDER],[mpc5674f*],[2]) -RTEMS_BSPOPTS_SET([MPC55XX_SYSTEM_CLOCK_DIVIDER],[*],[1]) -RTEMS_BSPOPTS_HELP([MPC55XX_SYSTEM_CLOCK_DIVIDER], -[system clock divider]) - -RTEMS_BSPOPTS_SET([MPC55XX_EMIOS_PRESCALER],[gwlcfm],[66]) -RTEMS_BSPOPTS_SET([MPC55XX_EMIOS_PRESCALER],[mpc5643l*],[]) -RTEMS_BSPOPTS_SET([MPC55XX_EMIOS_PRESCALER],[*] ,[1]) -RTEMS_BSPOPTS_HELP([MPC55XX_EMIOS_PRESCALER], -[Must be defined to set the EMIOS prescaler]) - -RTEMS_BSPOPTS_SET([MPC55XX_NULL_POINTER_PROTECTION],[mpc5566*],[1]) -RTEMS_BSPOPTS_SET([MPC55XX_NULL_POINTER_PROTECTION],[mpc5674f*],[1]) -RTEMS_BSPOPTS_SET([MPC55XX_NULL_POINTER_PROTECTION],[*],[]) -RTEMS_BSPOPTS_HELP([MPC55XX_NULL_POINTER_PROTECTION], -[enable NULL pointer protection]) - -RTEMS_BSPOPTS_SET([HAS_SMC91111],[phycore_mpc5554],[1]) -RTEMS_BSPOPTS_HELP([HAS_SMC91111], -[If defined the board has the SMC91111 networking chip.]) - -RTEMS_BSPOPTS_SET([SMC91111_ENADDR_IS_SETUP],[phycore_mpc5554],[1]) -RTEMS_BSPOPTS_HELP([SMC91111_ENADDR_IS_SETUP], -[If defined the SMC91111 chip has the ethernet address loaded at reset.]) - -RTEMS_BSPOPTS_SET([SMSC9218I_EDMA_RX_CHANNEL],[*],[49]) -RTEMS_BSPOPTS_HELP([SMSC9218I_EDMA_RX_CHANNEL], -[receive eDMA channel for SMSC9218I network interface]) - -RTEMS_BSPOPTS_SET([SMSC9218I_EDMA_TX_CHANNEL],[*],[48]) -RTEMS_BSPOPTS_HELP([SMSC9218I_EDMA_TX_CHANNEL], -[transmit eDMA channel for SMSC9218I network interface]) - -RTEMS_BSPOPTS_SET([SMSC9218I_BIG_ENDIAN_SUPPORT],[mpc5674f_ecu508*],[1]) -RTEMS_BSPOPTS_HELP([SMSC9218I_BIG_ENDIAN_SUPPORT], -[enable big endian support for SMSC9218I network interface]) - -RTEMS_BSPOPTS_SET([SMSC9218I_ENABLE_LED_OUTPUTS],[mpc5674f_ecu508*],[1]) -RTEMS_BSPOPTS_HELP([SMSC9218I_ENABLE_LED_OUTPUTS], -[enable LED outputs for SMSC9218I network interface]) - -RTEMS_BSPOPTS_SET([SMSC9218I_RESET_PIN],[mpc5674f_ecu508*],[433]) -RTEMS_BSPOPTS_SET([SMSC9218I_RESET_PIN],[mpc5566*],[186]) -RTEMS_BSPOPTS_SET([SMSC9218I_RESET_PIN],[*],[]) -RTEMS_BSPOPTS_HELP([SMSC9218I_RESET_PIN], -[reset pin for SMSC9218I network interface]) - -RTEMS_BSPOPTS_SET([SMSC9218I_IRQ_PIN],[mpc5674f_ecu508*],[450]) -RTEMS_BSPOPTS_SET([SMSC9218I_IRQ_PIN],[mpc5566*],[193]) -RTEMS_BSPOPTS_SET([SMSC9218I_IRQ_PIN],[*],[]) -RTEMS_BSPOPTS_HELP([SMSC9218I_IRQ_PIN], -[IRQ pin for SMSC9218I network interface]) - -RTEMS_BSPOPTS_SET([MPC55XX_CLOCK_EMIOS_CHANNEL],[mpc5643l*],[]) -RTEMS_BSPOPTS_SET([MPC55XX_CLOCK_EMIOS_CHANNEL],[mpc5668g*],[]) -RTEMS_BSPOPTS_SET([MPC55XX_CLOCK_EMIOS_CHANNEL],[mpc5674f*],[31]) -RTEMS_BSPOPTS_SET([MPC55XX_CLOCK_EMIOS_CHANNEL],[*],[23]) -RTEMS_BSPOPTS_HELP([MPC55XX_CLOCK_EMIOS_CHANNEL], -[selects the eMIOS channel for the RTEMS system tick (the default is the last channel)]) - -RTEMS_BSPOPTS_SET([MPC55XX_CLOCK_PIT_CHANNEL],[mpc5643l*],[3]) -RTEMS_BSPOPTS_SET([MPC55XX_CLOCK_PIT_CHANNEL],[mpc5668g*],[8]) -RTEMS_BSPOPTS_SET([MPC55XX_CLOCK_PIT_CHANNEL],[*],[]) -RTEMS_BSPOPTS_HELP([MPC55XX_CLOCK_PIT_CHANNEL], -[selects the PIT channel for the RTEMS system tick (the default is the last channel)]) - -RTEMS_BSPOPTS_SET([MPC55XX_CHIP_TYPE],[gwlcfm],[5516]) -RTEMS_BSPOPTS_SET([MPC55XX_CHIP_TYPE],[mpc5566*],[5566]) -RTEMS_BSPOPTS_SET([MPC55XX_CHIP_TYPE],[mpc5643l*],[5643]) -RTEMS_BSPOPTS_SET([MPC55XX_CHIP_TYPE],[mpc5668g*],[5668]) -RTEMS_BSPOPTS_SET([MPC55XX_CHIP_TYPE],[mpc5674f*],[5674]) -RTEMS_BSPOPTS_SET([MPC55XX_CHIP_TYPE],[*],[5554]) -RTEMS_BSPOPTS_HELP([MPC55XX_CHIP_TYPE], -[specifies the chip type in use (e.g. 5554 for MPC5554)]) - -RTEMS_BSPOPTS_SET([MPC55XX_CHIP_FAMILY],[*],[(MPC55XX_CHIP_TYPE / 10)]) -RTEMS_BSPOPTS_HELP([MPC55XX_CHIP_FAMILY], -[specifies the chip family in use (e.g. 555 for MPC5554)]) - -RTEMS_BSPOPTS_SET([MPC55XX_EARLY_STACK_SIZE],[*],[1024]) -RTEMS_BSPOPTS_HELP([MPC55XX_EARLY_STACK_SIZE], -[size of the early initialization stack in bytes]) - -RTEMS_BSPOPTS_SET([MPC55XX_BOOTFLAGS],[*],[]) -RTEMS_BSPOPTS_HELP([MPC55XX_BOOTFLAGS], -[if defined, builds in bootflags above the RCHW for setup in a debugger to avoid startup MMU setup]) - -RTEMS_BSPOPTS_SET([MPC55XX_BOARD_MPC5674FEVB],[mpc5674fevb*],[1]) -RTEMS_BSPOPTS_HELP([MPC55XX_BOARD_MPC5674FEVB],[if defined, use custom settings for MPC5674FEVB board]) - -RTEMS_BSPOPTS_SET([MPC55XX_BOARD_MPC5566EVB],[mpc5566evb*],[1]) -RTEMS_BSPOPTS_HELP([MPC55XX_BOARD_MPC5566EVB],[if defined, use custom settings for MPC5566EVB board]) - -RTEMS_BSPOPTS_SET([MPC55XX_BOARD_GWLCFM],[gwlcfm],[1]) -RTEMS_BSPOPTS_HELP([MPC55XX_BOARD_GWLCFM],[if defined, use custom settings for GWLCFM board]) - -RTEMS_BSPOPTS_SET([MPC55XX_BOARD_MPC5674F_ECU508],[mpc5674f_ecu508*],[1]) -RTEMS_BSPOPTS_HELP([MPC55XX_BOARD_MPC5674F_ECU508],[if defined, use custom settings for ECU508 board]) - -RTEMS_BSPOPTS_SET([MPC55XX_BOARD_MPC5674F_RSM6],[mpc5674f_rsm6],[1]) -RTEMS_BSPOPTS_HELP([MPC55XX_BOARD_MPC5674F_RSM6],[if defined, use custom settings for RSM6 board]) - -RTEMS_BSPOPTS_SET([MPC55XX_BOARD_PHYCORE_MPC5554],[phycore_mpc5554],[1]) -RTEMS_BSPOPTS_HELP([MPC55XX_BOARD_PHYCORE_MPC5554],[if defined, use custom settings for phyCORE MPC5554 board]) - -RTEMS_BSPOPTS_SET([RTEMS_BSP_I2C_EEPROM_DEVICE_NAME],[gwlcfm],['"eeprom"']) -RTEMS_BSPOPTS_HELP([RTEMS_BSP_I2C_EEPROM_DEVICE_NAME],[EEPROM name for LibI2C]) -RTEMS_BSPOPTS_SET([RTEMS_BSP_I2C_EEPROM_DEVICE_PATH],[gwlcfm],['"/dev/i2c1.eeprom"']) -RTEMS_BSPOPTS_HELP([RTEMS_BSP_I2C_EEPROM_DEVICE_PATH],[EEPROM device file path]) - -RTEMS_BSPOPTS_SET([MPC55XX_NEEDS_LOW_LEVEL_INIT],[mpc5674f_*app],[]) -RTEMS_BSPOPTS_SET([MPC55XX_NEEDS_LOW_LEVEL_INIT],[*],[1]) -RTEMS_BSPOPTS_HELP([MPC55XX_NEEDS_LOW_LEVEL_INIT],[if defined, do low level initialization]) - -RTEMS_BSPOPTS_SET([MPC55XX_ENABLE_START_PROLOGUE],[mpc5674f_rsm6],[1]) -RTEMS_BSPOPTS_HELP([MPC55XX_ENABLE_START_PROLOGUE],[if defined, enable start prologue]) - -AC_DEFINE(__ppc_generic, 1, [PowerPC model option]) - -AC_CONFIG_FILES([Makefile]) - -RTEMS_BSP_CLEANUP_OPTIONS - -RTEMS_PPC_EXCEPTIONS - -AC_OUTPUT |