diff options
Diffstat (limited to 'c/src/lib/libbsp/powerpc/motorola_powerpc/README.OTHERBOARDS')
-rw-r--r-- | c/src/lib/libbsp/powerpc/motorola_powerpc/README.OTHERBOARDS | 93 |
1 files changed, 0 insertions, 93 deletions
diff --git a/c/src/lib/libbsp/powerpc/motorola_powerpc/README.OTHERBOARDS b/c/src/lib/libbsp/powerpc/motorola_powerpc/README.OTHERBOARDS deleted file mode 100644 index 52dbe60793..0000000000 --- a/c/src/lib/libbsp/powerpc/motorola_powerpc/README.OTHERBOARDS +++ /dev/null @@ -1,93 +0,0 @@ -This BSP is designed to support multiple Motorola PowerPC boards. The -following extract from some email from Eric Valette should provide -the basic information required to use this BSP on other models. - - -Joel> + I am sure there are other Motorola boards which this BSP should -Joel> support. If you know of other models that should work, list -Joel> them off to me. I will make them aliases and note them as -Joel> untested in the status. - -Extract of motorola.c : - -static const mot_info_t mot_boards[] = { - {0x300, 0x00, "MVME 2400"}, - {0x010, 0x00, "Genesis"}, - {0x020, 0x00, "Powerstack (Series E)"}, - {0x040, 0x00, "Blackhawk (Powerstack)"}, - {0x050, 0x00, "Omaha (PowerStack II Pro3000)"}, - {0x060, 0x00, "Utah (Powerstack II Pro4000)"}, - {0x0A0, 0x00, "Powerstack (Series EX)"}, - {0x1E0, 0xE0, "Mesquite cPCI (MCP750)"}, - {0x1E0, 0xE1, "Sitka cPCI (MCPN750)"}, - {0x1E0, 0xE2, "Mesquite cPCI (MCP750) w/ HAC"}, - {0x1E0, 0xF6, "MTX Plus"}, - {0x1E0, 0xF7, "MTX wo/ Parallel Port"}, - {0x1E0, 0xF8, "MTX w/ Parallel Port"}, - {0x1E0, 0xF9, "MVME 2300"}, - {0x1E0, 0xFA, "MVME 2300SC/2600"}, - {0x1E0, 0xFB, "MVME 2600 with MVME712M"}, - {0x1E0, 0xFC, "MVME 2600/2700 with MVME761"}, - {0x1E0, 0xFD, "MVME 3600 with MVME712M"}, - {0x1E0, 0xFE, "MVME 3600 with MVME761"}, - {0x1E0, 0xFF, "MVME 1600-001 or 1600-011"}, - {0x000, 0x00, ""} -}; - -In theory, each board starting with 0x1E0 should be really straighforward -to port (604 proc or above and raven host bridge...). - -Joel> Then we just have to add README.BOARD_MODEL and TIMES.BOARD_MODEL - -I should also make a README to explain that some file containing -switch statement should be completed (e.g libbsp/powerpc/shared/irq_init.c -[NOTE: This is that README. :) ] - - ------------------------------ - if ( (currentBoard == MESQUITE) ) { - VIA_isa_bridge_interrupts_setup(); - known_cpi_isa_bridge = 1; - } - if (!known_cpi_isa_bridge) { - printk("Please add code for PCI/ISA bridge init to libbsp/shared/irq/irq_init.c\n"); - printk("If your card works correctly please add a test and set known_cpi_isa_bridge to true\n"); - } - ------------------------------ - -and libbsp/powerpc/mpc6xx/execeptions/raw_exception.c - - ------------------------------- - -int mpc604_vector_is_valid(rtems_vector vector) -{ - /* - * Please fill this for MVME2307 - */ - printk("Please complete libcpu/powerpc/XXX/raw_exception.c\n"); - return 0; -} - -int mpc60x_set_exception (const rtems_raw_except_connect_data* except) -{ - unsigned int level; - - if (current_ppc_cpu == PPC_750) { - if (!mpc750_vector_is_valid(except->exceptIndex)){ - return 0; - } - goto exception_ok; - } - if (current_ppc_cpu == PPC_604) { - if (!mpc604_vector_is_valid(except->exceptIndex)){ - return 0; - } - goto exception_ok; - } - printk("Please complete libcpu/powerpc/XXX/raw_exception.c\n"); - return 0; - ----------------------------------- - -NB : re readding the code I should have done a switch... TSSSS.A future patche - I think. - - |