diff options
Diffstat (limited to 'c/src/lib/libbsp/powerpc/gen5200/configure.ac')
| -rw-r--r-- | c/src/lib/libbsp/powerpc/gen5200/configure.ac | 132 |
1 files changed, 0 insertions, 132 deletions
diff --git a/c/src/lib/libbsp/powerpc/gen5200/configure.ac b/c/src/lib/libbsp/powerpc/gen5200/configure.ac deleted file mode 100644 index 0b09f2f1b5..0000000000 --- a/c/src/lib/libbsp/powerpc/gen5200/configure.ac +++ /dev/null @@ -1,132 +0,0 @@ -## Process this file with autoconf to produce a configure script. - -AC_PREREQ([2.69]) -AC_INIT([rtems-c-src-lib-libbsp-powerpc-gen5200],[_RTEMS_VERSION],[https://devel.rtems.org/newticket]) -RTEMS_TOP(../../../../../..) -RTEMS_SOURCE_TOP -RTEMS_BUILD_TOP -RTEMS_BSP_LINKCMDS - -RTEMS_CANONICAL_TARGET_CPU -AM_INIT_AUTOMAKE([no-define nostdinc foreign 1.12.2]) -RTEMS_BSP_CONFIGURE - - -RTEMS_BSPOPTS_SET_DATA_CACHE_ENABLED([*],[1]) -RTEMS_BSPOPTS_HELP_DATA_CACHE_ENABLED - -RTEMS_BSPOPTS_SET_INSTRUCTION_CACHE_ENABLED([*],[1]) -RTEMS_BSPOPTS_HELP_INSTRUCTION_CACHE_ENABLED - -RTEMS_BSPOPTS_SET([BENCHMARK_IRQ_PROCESSING],[*],[0]) -RTEMS_BSPOPTS_HELP([BENCHMARK_IRQ_PROCESSING], -[If set to !0, enable code to benchmark IRQ processing.]) - -RTEMS_BSPOPTS_SET([ALLOW_IRQ_NESTING],[icecube],[0]) -RTEMS_BSPOPTS_SET([ALLOW_IRQ_NESTING],[*],[1]) -RTEMS_BSPOPTS_HELP([ALLOW_IRQ_NESTING], -[If set to !0, allow nested IRQ processing.]) - -RTEMS_BSPOPTS_SET([BSP_PRESS_KEY_FOR_RESET],[icecube],[1]) -RTEMS_BSPOPTS_SET([BSP_PRESS_KEY_FOR_RESET],[*],[0]) -RTEMS_BSPOPTS_HELP([BSP_PRESS_KEY_FOR_RESET], -[If set to !0, print a message and wait until pressed before resetting - board when application exits.]) - -RTEMS_BSPOPTS_SET([BSP_RESET_BOARD_AT_EXIT],[icecube],[1]) -RTEMS_BSPOPTS_SET([BSP_RESET_BOARD_AT_EXIT],[pm520_*],[1]) -RTEMS_BSPOPTS_SET([BSP_RESET_BOARD_AT_EXIT],[brs*l],[1]) -RTEMS_BSPOPTS_SET([BSP_RESET_BOARD_AT_EXIT],[*],[0]) -RTEMS_BSPOPTS_HELP([BSP_RESET_BOARD_AT_EXIT], -[If set to !0, reset the board when the application exits.]) - -RTEMS_BSPOPTS_SET([BSP_GPIOPCR_INITMASK],[pm520_ze30],[0x037F3F07]) -RTEMS_BSPOPTS_SET([BSP_GPIOPCR_INITVAL],[pm520_ze30],[0x01552104]) - -RTEMS_BSPOPTS_SET([BSP_GPIOPCR_INITMASK],[brs*l],[0xb30F0F77]) -RTEMS_BSPOPTS_SET([BSP_GPIOPCR_INITVAL],[brs*l],[0x91050444]) - -RTEMS_BSPOPTS_SET([BSP_GPIOPCR_INITMASK],[dp2],[0x337F3F77]) -RTEMS_BSPOPTS_SET([BSP_GPIOPCR_INITVAL],[dp2],[0x03550040]) - -RTEMS_BSPOPTS_SET([BSP_GPIOPCR_INITMASK],[*],[0x330F0F77]) -RTEMS_BSPOPTS_SET([BSP_GPIOPCR_INITVAL],[*],[0x01050444]) - -RTEMS_BSPOPTS_HELP([BSP_GPIOPCR_INITMASK], -[Defines the bits cleared in the MPC5200 GPIOPCR register during -initialization. Must match the hardware requirements. Must be consistent with -BSP_GPIOPCR_INITVAL. The bits are cleared via BSP_GPIOPCR_INITMASK and then -set via BSP_GPIOPCR_INITVAL.]) -RTEMS_BSPOPTS_HELP([BSP_GPIOPCR_INITVAL], -[Defines the bits set in the MPC5200 GPIOPCR register during initialization. -Must match the hardware requirements. Must be consistent with -BSP_GPIOPCR_INITMASK. The bits are cleared via BSP_GPIOPCR_INITMASK and then -set via BSP_GPIOPCR_INITVAL.]) - -## on ze30, we have PSC1/4/5/6 ... -RTEMS_BSPOPTS_SET([BSP_UART_AVAIL_MASK],[pm520_ze30],[0x39]) -## on cr825, we have PSC1/2/3 -RTEMS_BSPOPTS_SET([BSP_UART_AVAIL_MASK],[pm520_cr825],[0x07]) -## on brs5l and brs6l, we have PSC1/2/3 -RTEMS_BSPOPTS_SET([BSP_UART_AVAIL_MASK],[brs*l],[0x07]) -## on icecube, we only have PSC1 -RTEMS_BSPOPTS_SET([BSP_UART_AVAIL_MASK],[icecube],[0x01]) -## dp2: PSC2 (via USB connector), PSC6 (GPS module) -RTEMS_BSPOPTS_SET([BSP_UART_AVAIL_MASK],[dp2],[0x22]) -## default -RTEMS_BSPOPTS_SET([BSP_UART_AVAIL_MASK],[*],[0x01]) -RTEMS_BSPOPTS_HELP([BSP_UART_AVAIL_MASK], -[bit mask to specify the UARTS (PSCs), which should be enabled on this board. - Must match the hardware requirements. PSC1 corresponds to the LSB]) - -RTEMS_BSPOPTS_SET([MPC5200_PSC_INDEX_FOR_GPS_MODULE],[dp2],[5]) -RTEMS_BSPOPTS_HELP([MPC5200_PSC_INDEX_FOR_GPS_MODULE],[PSC index for GPS module, if defined results in '/dev/gps']) - -RTEMS_BSPOPTS_SET([SINGLE_CHAR_MODE],[*],[]) -RTEMS_BSPOPTS_HELP([SINGLE_CHAR_MODE],[enable single character mode for the PSC console driver]) - -RTEMS_BSPOPTS_SET([UARTS_USE_TERMIOS_INT],[*],[1]) -RTEMS_BSPOPTS_HELP([UARTS_USE_TERMIOS_INT],[enable interrupt support for the PSC console driver]) - -RTEMS_BSPOPTS_SET([PRINTK_MINOR],[dp2],[1]) -RTEMS_BSPOPTS_SET([PRINTK_MINOR],[*],[0]) -RTEMS_BSPOPTS_HELP([PRINTK_MINOR],[console minor number used by printk()]) - -RTEMS_BSPOPTS_SET([MPC5200_BOARD_PM520_ZE30],[pm520_ze30],[1]) -RTEMS_BSPOPTS_HELP([MPC5200_BOARD_PM520_ZE30], -[enable settings for PM520 ZE30]) - -RTEMS_BSPOPTS_SET([MPC5200_BOARD_PM520_CR825],[pm520_cr825],[1]) -RTEMS_BSPOPTS_HELP([MPC5200_BOARD_PM520_CR825], -[enable settings for PM520 CR825]) - -RTEMS_BSPOPTS_SET([MPC5200_BOARD_ICECUBE],[icecube],[1]) -RTEMS_BSPOPTS_HELP([MPC5200_BOARD_ICECUBE], -[enable settings for IceCube]) - -RTEMS_BSPOPTS_SET([MPC5200_BOARD_BRS5L],[brs5l],[1]) -RTEMS_BSPOPTS_HELP([MPC5200_BOARD_BRS5L], -[enable settings for BRS5L]) - -RTEMS_BSPOPTS_SET([MPC5200_BOARD_BRS6L],[brs6l],[1]) -RTEMS_BSPOPTS_HELP([MPC5200_BOARD_BRS6L], -[enable settings for BRS6L]) - -RTEMS_BSPOPTS_SET([MPC5200_BOARD_DP2],[dp2],[1]) -RTEMS_BSPOPTS_HELP([MPC5200_BOARD_DP2], -[enable settings for DP2]) - -RTEMS_BSPOPTS_SET([HAS_UBOOT],[pm520*],[1]) -RTEMS_BSPOPTS_SET([HAS_UBOOT],[icecube],[1]) -RTEMS_BSPOPTS_SET([HAS_UBOOT],[dp2],[1]) -RTEMS_BSPOPTS_HELP([HAS_UBOOT],[enable U-Boot startup]) - - -# Explicitly list all Makefiles here -AC_CONFIG_FILES([Makefile]) - -RTEMS_BSP_CLEANUP_OPTIONS - -RTEMS_PPC_EXCEPTIONS - -AC_OUTPUT |