8 files changed, 174 insertions, 159 deletions
diff --git a/c/src/lib/libbsp/powerpc/eth_comm/Makefile.in b/c/src/lib/libbsp/powerpc/eth_comm/Makefile.in
index 535a525d82..a5fcbbf728 100644
--- a/c/src/lib/libbsp/powerpc/eth_comm/Makefile.in
+++ b/c/src/lib/libbsp/powerpc/eth_comm/Makefile.in
@@ -5,20 +5,20 @@
 @SET_MAKE@
 srcdir = @srcdir@
 top_srcdir = @top_srcdir@
-top_builddir = ../../../../../..
-subdir = c/src/lib/libbsp/powerpc/eth_comm
+top_builddir = ../../..
+subdir = libbsp/powerpc/eth_comm
 
-INSTALL = @INSTALL@
-
-RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@
+RTEMS_ROOT = @RTEMS_ROOT@
 PROJECT_ROOT = @PROJECT_ROOT@
 
 VPATH = @srcdir@
 
-include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg
+include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
 include $(RTEMS_ROOT)/make/directory.cfg
 
-SRCS=README
+INSTALL_CHANGE = @INSTALL_CHANGE@
+
+SRCS = README
 
 # We only build the networking device driver if HAS_NETWORKING was defined
 NETWORKING_DRIVER_yes_V = network
@@ -28,8 +28,8 @@ all: $(SRCS)
 
 # wrapup is the one that actually builds and installs the library
 #  from the individual .rel files built in other directories
-SUB_DIRS=include startup start canbus console $(NETWORKING_DRIVER) wrapup
+SUB_DIRS = include startup start canbus console $(NETWORKING_DRIVER) wrapup
 
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status
 	cd $(top_builddir) \
 	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
diff --git a/c/src/lib/libbsp/powerpc/eth_comm/canbus/Makefile.in b/c/src/lib/libbsp/powerpc/eth_comm/canbus/Makefile.in
index 84b9ac7641..6dd0c8540d 100644
--- a/c/src/lib/libbsp/powerpc/eth_comm/canbus/Makefile.in
+++ b/c/src/lib/libbsp/powerpc/eth_comm/canbus/Makefile.in
@@ -5,42 +5,42 @@
 @SET_MAKE@
 srcdir = @srcdir@
 top_srcdir = @top_srcdir@
-top_builddir = ../../../../../../..
-subdir = c/src/lib/libbsp/powerpc/eth_comm/canbus
+top_builddir = ../../../..
+subdir = libbsp/powerpc/eth_comm/canbus
 
-INSTALL = @INSTALL@
-
-RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@
+RTEMS_ROOT = @RTEMS_ROOT@
 PROJECT_ROOT = @PROJECT_ROOT@
 
 VPATH = @srcdir@
 
-PGM=${ARCH}/canbus.rel
+PGM = ${ARCH}/canbus.rel
 
 # C source names, if any, go here -- minus the .c
-C_PIECES=canbus
-C_FILES=$(C_PIECES:%=%.c)
-C_O_FILES=$(C_PIECES:%=${ARCH}/%.o)
+C_PIECES = canbus
+C_FILES = $(C_PIECES:%=%.c)
+C_O_FILES = $(C_PIECES:%=${ARCH}/%.o)
 
-H_FILES=
+H_FILES =
 
-SRCS=$(C_FILES) $(H_FILES)
-OBJS=$(C_O_FILES)
+SRCS = $(C_FILES) $(H_FILES)
+OBJS = $(C_O_FILES)
 
-include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg
+include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
 include $(RTEMS_ROOT)/make/leaf.cfg
 
+INSTALL_CHANGE = @INSTALL_CHANGE@
+
 #
 # (OPTIONAL) Add local stuff here using +=
 #
 
-DEFINES  +=
+DEFINES +=
 CPPFLAGS +=
-CFLAGS   +=
+CFLAGS +=
 
-LD_PATHS  +=
-LD_LIBS   +=
-LDFLAGS   +=
+LD_PATHS +=
+LD_LIBS +=
+LDFLAGS +=
 
 #
 # Add your list of files to delete here.  The config files
@@ -55,11 +55,11 @@ CLOBBER_ADDITIONS +=
 ${PGM}: ${SRCS} ${OBJS}
 	$(make-rel)
 
-all:	${ARCH} $(SRCS) $(PGM)
+all: ${ARCH} $(SRCS) $(PGM)
 
 # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile
-install:  all
+install: all
 
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status
 	cd $(top_builddir) \
 	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
diff --git a/c/src/lib/libbsp/powerpc/eth_comm/console/Makefile.in b/c/src/lib/libbsp/powerpc/eth_comm/console/Makefile.in
index caf1495a38..05aab57c3c 100644
--- a/c/src/lib/libbsp/powerpc/eth_comm/console/Makefile.in
+++ b/c/src/lib/libbsp/powerpc/eth_comm/console/Makefile.in
@@ -5,42 +5,42 @@
 @SET_MAKE@
 srcdir = @srcdir@
 top_srcdir = @top_srcdir@
-top_builddir = ../../../../../../..
-subdir = c/src/lib/libbsp/powerpc/eth_comm/console
+top_builddir = ../../../..
+subdir = libbsp/powerpc/eth_comm/console
 
-INSTALL = @INSTALL@
-
-RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@
+RTEMS_ROOT = @RTEMS_ROOT@
 PROJECT_ROOT = @PROJECT_ROOT@
 
 VPATH = @srcdir@
 
-PGM=${ARCH}/console.rel
+PGM = ${ARCH}/console.rel
 
 # C source names, if any, go here -- minus the .c
-C_PIECES=console
-C_FILES=$(C_PIECES:%=%.c)
-C_O_FILES=$(C_PIECES:%=${ARCH}/%.o)
+C_PIECES = console
+C_FILES = $(C_PIECES:%=%.c)
+C_O_FILES = $(C_PIECES:%=${ARCH}/%.o)
 
-H_FILES=
+H_FILES =
 
-SRCS=$(C_FILES) $(H_FILES)
-OBJS=$(C_O_FILES)
+SRCS = $(C_FILES) $(H_FILES)
+OBJS = $(C_O_FILES)
 
-include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg
+include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
 include $(RTEMS_ROOT)/make/leaf.cfg
 
+INSTALL_CHANGE = @INSTALL_CHANGE@
+
 #
 # (OPTIONAL) Add local stuff here using +=
 #
 
-DEFINES  +=
+DEFINES +=
 CPPFLAGS +=
-CFLAGS   +=
+CFLAGS +=
 
-LD_PATHS  +=
-LD_LIBS   +=
-LDFLAGS   +=
+LD_PATHS +=
+LD_LIBS +=
+LDFLAGS +=
 
 #
 # Add your list of files to delete here.  The config files
@@ -55,11 +55,11 @@ CLOBBER_ADDITIONS +=
 ${PGM}: ${SRCS} ${OBJS}
 	$(make-rel)
 
-all:	${ARCH} $(SRCS) $(PGM)
+all: ${ARCH} $(SRCS) $(PGM)
 
 # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile
-install:  all
+install: all
 
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status
 	cd $(top_builddir) \
 	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
diff --git a/c/src/lib/libbsp/powerpc/eth_comm/include/Makefile.in b/c/src/lib/libbsp/powerpc/eth_comm/include/Makefile.in
index 613aa9d96c..55718cd8cf 100644
--- a/c/src/lib/libbsp/powerpc/eth_comm/include/Makefile.in
+++ b/c/src/lib/libbsp/powerpc/eth_comm/include/Makefile.in
@@ -5,17 +5,16 @@
 @SET_MAKE@
 srcdir = @srcdir@
 top_srcdir = @top_srcdir@
-top_builddir = ../../../../../../..
-subdir = c/src/lib/libbsp/powerpc/eth_comm/include
+top_builddir = ../../../..
+subdir = libbsp/powerpc/eth_comm/include
 
-INSTALL = @INSTALL@
-
-RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@
+RTEMS_ROOT = @RTEMS_ROOT@
 PROJECT_ROOT = @PROJECT_ROOT@
 
 VPATH = @srcdir@
 
-H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h $(srcdir)/canbus.h $(srcdir)/info.h
+H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h $(srcdir)/canbus.h \
+    $(srcdir)/info.h
 
 #
 #  Equate files are for including from assembly preprocessed by
@@ -27,18 +26,26 @@ H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h $(srcdir)/canbus.h $(srcdir)/info.
 
 EQ_FILES =
 
-SRCS=$(H_FILES) $(EQ_FILES)
+SRCS = $(H_FILES) $(EQ_FILES)
 
-include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg
+include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
 include $(RTEMS_ROOT)/make/leaf.cfg
 
+INSTALL_CHANGE = @INSTALL_CHANGE@
+mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs
+
+INSTALLDIRS = $(PROJECT_INCLUDE)
+
+$(INSTALLDIRS):
+	@$(mkinstalldirs) $(INSTALLDIRS)
+
 CLEAN_ADDITIONS +=
 CLOBBER_ADDITIONS +=
 
-all:	$(SRCS)
-	$(INSTALL_CHANGE) -m 444 $(H_FILES) $(PROJECT_INCLUDE)
-	$(INSTALL_CHANGE) -m 444 $(EQ_FILES) $(PROJECT_INCLUDE)
+all: $(SRCS)
+	@$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE)
+	@$(INSTALL_CHANGE) -m 644 $(EQ_FILES) $(PROJECT_INCLUDE)
 
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status
 	cd $(top_builddir) \
 	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
diff --git a/c/src/lib/libbsp/powerpc/eth_comm/network/Makefile.in b/c/src/lib/libbsp/powerpc/eth_comm/network/Makefile.in
index 8b77009749..f728049ca1 100644
--- a/c/src/lib/libbsp/powerpc/eth_comm/network/Makefile.in
+++ b/c/src/lib/libbsp/powerpc/eth_comm/network/Makefile.in
@@ -5,42 +5,42 @@
 @SET_MAKE@
 srcdir = @srcdir@
 top_srcdir = @top_srcdir@
-top_builddir = ../../../../../../..
-subdir = c/src/lib/libbsp/powerpc/eth_comm/network
+top_builddir = ../../../..
+subdir = libbsp/powerpc/eth_comm/network
 
-INSTALL = @INSTALL@
-
-RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@
+RTEMS_ROOT = @RTEMS_ROOT@
 PROJECT_ROOT = @PROJECT_ROOT@
 
 VPATH = @srcdir@
 
-PGM=${ARCH}/network.rel
+PGM = ${ARCH}/network.rel
 
 # C source names, if any, go here -- minus the .c
-C_PIECES=network
-C_FILES=$(C_PIECES:%=%.c)
-C_O_FILES=$(C_PIECES:%=${ARCH}/%.o)
+C_PIECES = network
+C_FILES = $(C_PIECES:%=%.c)
+C_O_FILES = $(C_PIECES:%=${ARCH}/%.o)
 
-H_FILES=
+H_FILES =
 
-SRCS=$(C_FILES) $(H_FILES)
-OBJS=$(C_O_FILES)
+SRCS = $(C_FILES) $(H_FILES)
+OBJS = $(C_O_FILES)
 
-include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg
+include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
 include $(RTEMS_ROOT)/make/leaf.cfg
 
+INSTALL_CHANGE = @INSTALL_CHANGE@
+
 #
 # (OPTIONAL) Add local stuff here using +=
 #
 
-DEFINES  += -D__INSIDE_RTEMS_BSD_TCPIP_STACK__
+DEFINES += -D__INSIDE_RTEMS_BSD_TCPIP_STACK__
 CPPFLAGS +=
-CFLAGS   +=
+CFLAGS +=
 
-LD_PATHS  +=
-LD_LIBS   +=
-LDFLAGS   +=
+LD_PATHS +=
+LD_LIBS +=
+LDFLAGS +=
 
 #
 # Add your list of files to delete here.  The config files
@@ -55,11 +55,11 @@ CLOBBER_ADDITIONS +=
 ${PGM}: ${SRCS} ${OBJS}
 	$(make-rel)
 
-all:	${ARCH} $(SRCS) $(PGM)
+all: ${ARCH} $(SRCS) $(PGM)
 
 # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile
-install:  all
+install: all
 
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status
 	cd $(top_builddir) \
 	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
diff --git a/c/src/lib/libbsp/powerpc/eth_comm/start/Makefile.in b/c/src/lib/libbsp/powerpc/eth_comm/start/Makefile.in
index 9af149d0d3..53655de2e9 100644
--- a/c/src/lib/libbsp/powerpc/eth_comm/start/Makefile.in
+++ b/c/src/lib/libbsp/powerpc/eth_comm/start/Makefile.in
@@ -5,47 +5,47 @@
 @SET_MAKE@
 srcdir = @srcdir@
 top_srcdir = @top_srcdir@
-top_builddir = ../../../../../../..
-subdir = c/src/lib/libbsp/powerpc/eth_comm/start
+top_builddir = ../../../..
+subdir = libbsp/powerpc/eth_comm/start
 
-INSTALL = @INSTALL@
-
-RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@
+RTEMS_ROOT = @RTEMS_ROOT@
 PROJECT_ROOT = @PROJECT_ROOT@
 
 VPATH = @srcdir@
 
-PGM=${ARCH}/start.rel
+PGM = ${ARCH}/start.rel
 
 # C source names, if any, go here -- minus the .c
-C_PIECES=
-C_FILES=$(C_PIECES:%=%.c)
-C_O_FILES=$(C_PIECES:%=${ARCH}/%.o)
+C_PIECES =
+C_FILES = $(C_PIECES:%=%.c)
+C_O_FILES = $(C_PIECES:%=${ARCH}/%.o)
 
-H_FILES=
+H_FILES =
 
 # Assembly source names, if any, go here -- minus the .S
-S_PIECES=start
-S_FILES=$(S_PIECES:%=%.S)
-S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o)
+S_PIECES = start
+S_FILES = $(S_PIECES:%=%.S)
+S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o)
 
-SRCS=$(C_FILES) $(H_FILES) $(S_FILES)
-OBJS=$(C_O_FILES) $(S_O_FILES)
+SRCS = $(C_FILES) $(H_FILES) $(S_FILES)
+OBJS = $(C_O_FILES) $(S_O_FILES)
 
-include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg
+include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
 include $(RTEMS_ROOT)/make/leaf.cfg
 
+INSTALL_CHANGE = @INSTALL_CHANGE@
+
 #
 # (OPTIONAL) Add local stuff here using +=
 #
 
-DEFINES  +=
+DEFINES +=
 CPPFLAGS +=
-CFLAGS   +=
+CFLAGS +=
 
-LD_PATHS  +=
-LD_LIBS   +=
-LDFLAGS   +=
+LD_PATHS +=
+LD_LIBS +=
+LDFLAGS +=
 
 #
 # Add your list of files to delete here.  The config files
@@ -60,11 +60,11 @@ CLOBBER_ADDITIONS +=
 ${PGM}: ${SRCS} ${OBJS}
 	$(make-rel)
 
-all:	${ARCH} $(SRCS) $(PGM)
+all: ${ARCH} $(SRCS) $(PGM)
 
 # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile
-install:  all
+install: all
 
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status
 	cd $(top_builddir) \
 	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
diff --git a/c/src/lib/libbsp/powerpc/eth_comm/startup/Makefile.in b/c/src/lib/libbsp/powerpc/eth_comm/startup/Makefile.in
index f0cc44f972..1a7c0cb4d0 100644
--- a/c/src/lib/libbsp/powerpc/eth_comm/startup/Makefile.in
+++ b/c/src/lib/libbsp/powerpc/eth_comm/startup/Makefile.in
@@ -5,47 +5,54 @@
 @SET_MAKE@
 srcdir = @srcdir@
 top_srcdir = @top_srcdir@
-top_builddir = ../../../../../../..
-subdir = c/src/lib/libbsp/powerpc/eth_comm/startup
+top_builddir = ../../../..
+subdir = libbsp/powerpc/eth_comm/startup
 
-INSTALL = @INSTALL@
-
-RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@
+RTEMS_ROOT = @RTEMS_ROOT@
 PROJECT_ROOT = @PROJECT_ROOT@
 
 VPATH = @srcdir@:@srcdir@/../../../shared
 
-PGM=${ARCH}/startup.rel
+PGM = ${ARCH}/startup.rel
 
 # C source names, if any, go here -- minus the .c
-C_PIECES=bspclean bsplibc bsppost bspstart bootcard main sbrk setvec alloc860 mmu gnatinstallhandler
-C_FILES=$(C_PIECES:%=%.c)
-C_O_FILES=$(C_PIECES:%=${ARCH}/%.o)
+C_PIECES = bspclean bsplibc bsppost bspstart bootcard main sbrk setvec \
+    alloc860 mmu gnatinstallhandler
+C_FILES = $(C_PIECES:%=%.c)
+C_O_FILES = $(C_PIECES:%=${ARCH}/%.o)
 
-H_FILES=
+H_FILES =
 
 # Assembly source names, if any, go here -- minus the .s
-S_PIECES=
-S_FILES=$(S_PIECES:%=%.s)
-S_O_FILES=$(S_FILES:%.s=${ARCH}/%.o)
+S_PIECES =
+S_FILES = $(S_PIECES:%=%.s)
+S_O_FILES = $(S_FILES:%.s=${ARCH}/%.o)
 
-SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES)
-OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES)
+SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES)
+OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES)
 
-include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg
+include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
 include $(RTEMS_ROOT)/make/leaf.cfg
 
+INSTALL_CHANGE = @INSTALL_CHANGE@
+mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs
+
+INSTALLDIRS = $(PROJECT_RELEASE)/lib
+
+$(INSTALLDIRS):
+	@$(mkinstalldirs) $(INSTALLDIRS)
+
 #
 # (OPTIONAL) Add local stuff here using +=
 #
 
-DEFINES  +=
+DEFINES +=
 CPPFLAGS +=
-CFLAGS   +=
+CFLAGS +=
 
-LD_PATHS  +=
-LD_LIBS   +=
-LDFLAGS   +=
+LD_PATHS +=
+LD_LIBS +=
+LDFLAGS +=
 
 #
 # Add your list of files to delete here.  The config files
@@ -60,12 +67,12 @@ CLOBBER_ADDITIONS +=
 ${PGM}: ${SRCS} ${OBJS}
 	$(make-rel)
 
-all:	${ARCH} $(SRCS) $(PGM)
-	$(INSTALL_CHANGE) $(srcdir)/linkcmds ${PROJECT_RELEASE}/lib
+all: ${ARCH} $(SRCS) $(PGM)
+	$(INSTALL_CHANGE) $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib
 
 # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile
-install:  all
+install: all
 
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status
 	cd $(top_builddir) \
 	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
diff --git a/c/src/lib/libbsp/powerpc/eth_comm/wrapup/Makefile.in b/c/src/lib/libbsp/powerpc/eth_comm/wrapup/Makefile.in
index b6813912f7..54c0b8a2ae 100644
--- a/c/src/lib/libbsp/powerpc/eth_comm/wrapup/Makefile.in
+++ b/c/src/lib/libbsp/powerpc/eth_comm/wrapup/Makefile.in
@@ -5,12 +5,10 @@
 @SET_MAKE@
 srcdir = @srcdir@
 top_srcdir = @top_srcdir@
-top_builddir = ../../../../../../..
-subdir = c/src/lib/libbsp/powerpc/eth_comm/wrapup
+top_builddir = ../../../..
+subdir = libbsp/powerpc/eth_comm/wrapup
 
-INSTALL = @INSTALL@
-
-RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@
+RTEMS_ROOT = @RTEMS_ROOT@
 PROJECT_ROOT = @PROJECT_ROOT@
 
 VPATH = @srcdir@
@@ -19,33 +17,36 @@ VPATH = @srcdir@
 NETWORKING_DRIVER_yes_V = network
 NETWORKING_DRIVER = $(NETWORKING_DRIVER_$(HAS_NETWORKING)_V)
 
-BSP_PIECES=startup start canbus console $(NETWORKING_DRIVER)
+BSP_PIECES = startup start canbus console $(NETWORKING_DRIVER)
 # pieces to pick up out of libcpu/ppc
-CPU_PIECES=mpc860/clock mpc860/timer mpc860/console-generic mpc860/vectors
-GENERIC_PIECES=
+CPU_PIECES = mpc860/clock mpc860/timer mpc860/console-generic mpc860/vectors
+GENERIC_PIECES =
 
 # bummer; have to use $foreach since % pattern subst rules only replace 1x
-OBJS=$(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \
-     $(foreach piece, $(CPU_PIECES), \
-         ../../../../libcpu/$(RTEMS_CPU)/$(piece)/$(ARCH)/$(notdir $(piece)).rel) \
-     $(foreach piece, $(GENERIC_PIECES), \
-         ../../../$(piece)/$(ARCH)/$(piece).rel)
-LIB=$(ARCH)/libbsp.a
-
-include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg
+OBJS = $(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \
+    $(foreach piece, $(CPU_PIECES), \
+    ../../../../libcpu/$(RTEMS_CPU)/$(piece)/$(ARCH)/$(notdir $(piece)).rel) \
+    $(foreach piece, $(GENERIC_PIECES), \
+    ../../../$(piece)/$(ARCH)/$(piece).rel)
+LIB = $(ARCH)/libbsp.a
+
+include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
 include $(RTEMS_ROOT)/make/lib.cfg
 
+INSTALL = @INSTALL@
+INSTALL_CHANGE = @INSTALL_CHANGE@
+
 #
 # (OPTIONAL) Add local stuff here using +=
 #
 
-DEFINES  +=
+DEFINES +=
 CPPFLAGS +=
-CFLAGS   +=
+CFLAGS +=
 
-LD_PATHS  +=
-LD_LIBS   +=
-LDFLAGS   +=
+LD_PATHS +=
+LD_LIBS +=
+LDFLAGS +=
 
 #
 # Add your list of files to delete here.  The config files
@@ -60,14 +61,14 @@ CLOBBER_ADDITIONS +=
 $(LIB): ${OBJS}
 	$(make-library)
 
-all:	${ARCH} $(SRCS) $(LIB)
-	$(INSTALL_VARIANT) -m 644 $(LIB) ${PROJECT_RELEASE}/lib
+all: ${ARCH} $(SRCS) $(LIB)
+	$(INSTALL_VARIANT) -m 644 $(LIB) $(PROJECT_RELEASE)/lib
 
-install:  all
+install: all
 
-$(PROJECT_ROOT)/${RTEMS_BSP}/lib/bsp_specs: ../bsp_specs
+$(PROJECT_ROOT)/@RTEMS_BSP@/lib/bsp_specs: ../bsp_specs
 	$(INSTALL_DATA) $< $@
 
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status
 	cd $(top_builddir) \
 	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status