diff options
Diffstat (limited to 'c/src/lib/libbsp/powerpc/dmv177/timer')
-rw-r--r-- | c/src/lib/libbsp/powerpc/dmv177/timer/Makefile.in | 61 | ||||
-rw-r--r-- | c/src/lib/libbsp/powerpc/dmv177/timer/timer.c | 152 |
2 files changed, 213 insertions, 0 deletions
diff --git a/c/src/lib/libbsp/powerpc/dmv177/timer/Makefile.in b/c/src/lib/libbsp/powerpc/dmv177/timer/Makefile.in new file mode 100644 index 0000000000..35a903e737 --- /dev/null +++ b/c/src/lib/libbsp/powerpc/dmv177/timer/Makefile.in @@ -0,0 +1,61 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH = @srcdir@ +RTEMS_ROOT = @RTEMS_ROOT@ +PROJECT_ROOT = @PROJECT_ROOT@ +RTEMS_CUSTOM = $(RTEMS_ROOT)/make/custom/$(RTEMS_BSP).cfg + +PGM=${ARCH}/timer.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=timer +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +# Assembly source names, if any, go here -- minus the .s +S_PIECES= +S_FILES=$(S_PIECES:%=%.s) +S_O_FILES=$(S_FILES:%.s=${ARCH}/%.o) + +SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) + +include $(RTEMS_CUSTOM) +include $(PROJECT_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile +install: all diff --git a/c/src/lib/libbsp/powerpc/dmv177/timer/timer.c b/c/src/lib/libbsp/powerpc/dmv177/timer/timer.c new file mode 100644 index 0000000000..72d1bb79a3 --- /dev/null +++ b/c/src/lib/libbsp/powerpc/dmv177/timer/timer.c @@ -0,0 +1,152 @@ +/* timer.c + * + * This file implements a benchmark timer using the General Purpose Timer on + * the MEC. + * + * The license and distribution terms for this file are in + * the file LICENSE in this distribution or at + * http://www.OARcorp.com/rtems/license.html. + * + * $Id$ + */ + +#include <assert.h> + +#include <bsp.h> + +rtems_unsigned64 Timer_driver_Start_time; + +rtems_boolean Timer_driver_Find_average_overhead; + +static inline rtems_unsigned64 PPC_Get_timebase_register( void ) +{ + rtems_unsigned32 tbr_low; + rtems_unsigned32 tbr_high; + rtems_unsigned32 tbr_high_old; + rtems_unsigned64 tbr; + + do { + asm volatile( "mftbu %0" : "=r" (tbr_high_old)); + asm volatile( "mftb %0" : "=r" (tbr_low)); + asm volatile( "mftbu %0" : "=r" (tbr_high)); + } while ( tbr_high_old != tbr_high ); + + tbr = tbr_high; + tbr <<= 32; + tbr |= tbr_low; + return tbr; +} + +/* PAGE + * + * Timer_initialize + * + * This routine initializes the timer. + * + * Input parameters: NONE + * + * Output parameters: NONE + * + * Return values: NONE + * + */ + +void Timer_initialize() +{ + /* + * Timer runs long and accurate enough not to require an interrupt. + */ + + + Timer_driver_Start_time = PPC_Get_timebase_register(); + + +} + +#define AVG_OVERHEAD 24 /* It typically takes 24 instructions */ + /* to start/stop the timer. */ +#define LEAST_VALID 1 /* Don't trust a value lower than this */ + /* psim can count instructions. :) */ + +/* PAGE + * + * Read_timer + * + * This routine reads the timer. + * + * Input parameters: NONE + * + * Output parameters: NONE + * + * Return values: timer in ms units + * + */ + +int Read_timer() +{ + rtems_unsigned64 clicks; + rtems_unsigned64 total64; + rtems_unsigned32 total; + + /* approximately CLOCK_SPEED clicks per microsecond */ + + clicks = PPC_Get_timebase_register(); + + assert( clicks > Timer_driver_Start_time ); + + total64 = clicks - Timer_driver_Start_time; + + assert( total64 <= 0xffffffff ); /* fits into a unsigned32 */ + + total = (rtems_unsigned32) total64; + + if ( Timer_driver_Find_average_overhead == 1 ) + return total; /* in one microsecond units */ + + if ( total < LEAST_VALID ) + return 0; /* below timer resolution */ + + return total - AVG_OVERHEAD; +} + +/* PAGE + * + * Empty_function + * + * This routine is called during the idle loop. + * + * Input parameters: NONE + * + * Output parameters: + * status code of successful + * + * Return values: NONE + * + */ + +rtems_status_code Empty_function( void ) +{ + return RTEMS_SUCCESSFUL; +} + +/* PAGE + * + * Set_find_average_overhead + * + * This routine sets a global boolean to the value passed in. + * + * Input parameters: + * find_flag - flag to indicate to find the average overhead. + * + * Output parameters: NONE + * + * Return values: NONE + * + */ + +void Set_find_average_overhead( + rtems_boolean find_flag +) +{ + Timer_driver_Find_average_overhead = find_flag; +} |