1 files changed, 0 insertions, 143 deletions
diff --git a/c/src/lib/libbsp/nios2/nios2_iss/startup/bspstart.c b/c/src/lib/libbsp/nios2/nios2_iss/startup/bspstart.c
deleted file mode 100644
index 8317b59516..0000000000
--- a/c/src/lib/libbsp/nios2/nios2_iss/startup/bspstart.c
+++ /dev/null
@@ -1,143 +0,0 @@
-/*
- *  This routine starts the application.  It includes application,
- *  board, and monitor specific initialization and configuration.
- *  The generic CPU dependent initialization has been performed
- *  before this routine is invoked.
- *
- *  COPYRIGHT (c) 2005-2006 Kolja Waschk rtemsdev/ixo.de
- *  Derived from no_cpu/no_bsp/startup/bspstart.c 1.23.
- *  COPYRIGHT (c) 1989-1999.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.com/license/LICENSE.
- *
- *  $Id$
- */
-
-#include <string.h>
-
-#include <bsp.h>
-#include <rtems/libio.h>
-#include <rtems/libcsupport.h>
-
-/*
- *  The original table from the application and our copy of it with
- *  some changes.
- */
-
-extern rtems_configuration_table Configuration;
-
-rtems_configuration_table  BSP_Configuration;
-
-rtems_cpu_table Cpu_table;
-
-/*
- *  Use the shared implementations of the following routines
- */
-
-extern void bsp_postdriver_hook(void);
-extern void bsp_libc_init( void *, uint32_t, int );
-extern rtems_configuration_table  BSP_Configuration;
-
-#if 0
-extern char         _RAMBase[];
-extern char         _RAMSize[];
-extern char         _WorkspaceBase[];
-extern char         _HeapSize[];
-#else
-extern char __alt_heap_start[];
-#endif
-
-/*
- *  Function:   bsp_pretasking_hook
- *  Created:    95/03/10
- *
- *  Description:
- *      BSP pretasking hook.  Called just before drivers are initialized.
- *      Used to setup libc and install any BSP extensions.
- *
- *  NOTES:
- *      Must not use libc (to do io) from here, since drivers are
- *      not yet initialized.
- *
- */
-
-void bsp_pretasking_hook(void)
-{
-    unsigned long heapStart;
-#if 0
-    unsigned long heapSize = (unsigned long)_HeapSize;
-#endif
-    unsigned long ramSpace;
-
-    heapStart = (unsigned long)BSP_Configuration.work_space_start
-              + BSP_Configuration.work_space_size;
-
-    if (heapStart & (CPU_ALIGNMENT-1))
-        heapStart = (heapStart + CPU_ALIGNMENT) & ~(CPU_ALIGNMENT-1);
-
-#if 0
-    ramSpace = (unsigned long)_RAMBase + (unsigned long)_RAMSize - heapStart;
-#else
-#if 0
-    ramSpace = SRAM_0_BASE 
-             + (SRAM_0_SRAM_MEMORY_SIZE * SRAM_0_SRAM_MEMORY_UNITS)
-             - heapStart;
-#else
-    ramSpace = RAM_BASE + RAM_BYTES - heapStart;
-#endif
-#endif
-
-    /* TODO */
-    ramSpace -= 16384; /* Space for initial stack, not to be zeroed */
-
-#if 0
-    if (heapSize < 10)
-        heapSize = ramSpace;
-    else if (heapSize > ramSpace)
-        rtems_fatal_error_occurred (('H'<<24) | ('E'<<16) | ('A'<<8) | 'P');
-
-    bsp_libc_init((void *)heapStart, heapSize, 0);
-#else
-    bsp_libc_init((void *)heapStart, ramSpace, 0);
-#endif
-
-#ifdef RTEMS_DEBUG
-    rtems_debug_enable( RTEMS_DEBUG_ALL_MASK );
-#endif
-}
-
-/*
- *  bsp_start
- *
- *  This routine does the bulk of the system initialization.
- */
-
-void bsp_start( void )
-{
-  /* Fixed */
-
-  BSP_Configuration.microseconds_per_tick = 1000;
-
-  /*
-   *  Need to "allocate" the memory for the RTEMS Workspace and
-   *  tell the RTEMS configuration where it is.  This memory is
-   *  not malloc'ed.  It is just "pulled from the air".
-   */
-
-#if 0
-  BSP_Configuration.work_space_start = (void *)_WorkspaceBase;
-#else
-  BSP_Configuration.work_space_start = (void *)__alt_heap_start;
-#endif
-
-  /*
-   *  initialize the CPU table for this BSP
-   */
-
-  Cpu_table.pretasking_hook = bsp_pretasking_hook;  /* init libc, etc. */
-  Cpu_table.postdriver_hook = bsp_postdriver_hook;
-  Cpu_table.interrupt_stack_size = CONFIGURE_INTERRUPT_STACK_MEMORY;
-}