1 files changed, 163 insertions, 0 deletions
diff --git a/c/src/lib/libbsp/m68k/mrm332/include/bsp.h b/c/src/lib/libbsp/m68k/mrm332/include/bsp.h
new file mode 100644
index 0000000000..d392f9bdbf
--- /dev/null
+++ b/c/src/lib/libbsp/m68k/mrm332/include/bsp.h
@@ -0,0 +1,163 @@
+/*  bsp.h
+ *
+ *  This include file contains all mrm board IO definitions.
+ *
+ *  COPYRIGHT (c) 1989-1999.
+ *  On-Line Applications Research Corporation (OAR).
+ *
+ *  The license and distribution terms for this file may be
+ *  found in the file LICENSE in this distribution or at
+ *  http://www.OARcorp.com/rtems/license.html.
+ *
+ *  $Id$
+ */
+
+#ifndef __MRM332_BSP_h
+#define __MRM332_BSP_h
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <rtems.h>
+#include <clockdrv.h>
+#include <console.h>
+#include <iosupp.h>
+#include <mrm332.h>
+#include <sim.h>
+#include <qsm.h>
+
+/*
+ *  confdefs.h overrides for this BSP:
+ *   - number of termios serial ports (defaults to 1)
+ *   - Interrupt stack space is not minimum if defined.
+ */
+
+/* #define CONFIGURE_NUMBER_OF_TERMIOS_PORTS 2 */
+/* #define CONFIGURE_INTERRUPT_STACK_MEMORY  (TBD * 1024) */
+
+/*
+ *  Define the time limits for RTEMS Test Suite test durations.
+ *  Long test and short test duration limits are provided.  These
+ *  values are in seconds and need to be converted to ticks for the
+ *  application.
+ *
+ */
+
+#define MAX_LONG_TEST_DURATION       300 /* 5 minutes = 300 seconds */
+#define MAX_SHORT_TEST_DURATION      3   /* 3 seconds */
+
+/*
+ *  Define the interrupt mechanism for Time Test 27
+ */
+
+/* XXX - JRS - I want to compile the tmtests */
+
+#define MUST_WAIT_FOR_INTERRUPT 1 
+
+#define Install_tm27_vector( handler )
+
+#define Cause_tm27_intr()
+
+#define Clear_tm27_intr()
+
+#define Lower_tm27_intr() 
+
+/*
+ *  Simple spin delay in microsecond units for device drivers.
+ *  This is very dependent on the clock speed of the target.
+ */
+
+#define delay( microseconds ) \
+  { register rtems_unsigned32 _delay=(microseconds); \
+    register rtems_unsigned32 _tmp=123; \
+    asm volatile( "0: \
+                     nbcd      %0 ; \
+                     nbcd      %0 ; \
+                     dbf       %1,0b" \
+                  : "=d" (_tmp), "=d" (_delay) \
+                  : "0"  (_tmp), "1"  (_delay) ); \
+  }
+
+/* externals */
+
+extern char _etext[];
+extern char _copy_start[];
+extern char _edata[];
+extern char _clear_start[];
+extern char end[];
+extern char _copy_data_from_rom[];
+
+/* constants */
+
+#ifdef __START_C__
+#define STACK_SIZE "#0x800"
+#else
+#define STACK_SIZE 0x800
+#endif
+
+/* macros */
+
+#define RAW_PUTS(str) \
+  { register char *ptr = str; \
+    while (*ptr) outbyte(*ptr++); \
+  }
+
+#define RAW_PUTI(n) { \
+    register int i, j; \
+    \
+    RAW_PUTS("0x"); \
+    for (i=28;i>=0;i -= 4) { \
+      j = (n>>i) & 0xf; \
+      outbyte( (j>9 ? j-10+'a' : j+'0') ); \
+    } \
+  }
+
+/* miscellaneous stuff assumed to exist */
+
+extern rtems_configuration_table BSP_Configuration;
+
+extern m68k_isr_entry M68Kvec[];   /* vector table address */
+
+extern int stack_size;
+
+extern int stack_start;
+
+/*
+ *  Device Driver Table Entries
+ */
+ 
+/*
+ * NOTE: Use the standard Console driver entry
+ */
+ 
+/*
+ * NOTE: Use the standard Clock driver entry
+ */
+
+/* functions */
+
+void bsp_cleanup( void );
+
+m68k_isr_entry set_vector(
+  rtems_isr_entry     handler,
+  rtems_vector_number vector,
+  int                 type
+);
+
+void console_init(void);
+
+void Spurious_Initialize(void);
+
+void _UART_flush(void);
+
+void Clock_exit(void);
+
+void outbyte(char);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+/* end of include file */