1 files changed, 0 insertions, 121 deletions
diff --git a/c/src/lib/libbsp/m68k/idp/timer/timer.c b/c/src/lib/libbsp/m68k/idp/timer/timer.c
deleted file mode 100644
index 176f393e45..0000000000
--- a/c/src/lib/libbsp/m68k/idp/timer/timer.c
+++ /dev/null
@@ -1,121 +0,0 @@
-/*  Timer_init()
- *
- *  This routine initializes the MC68230 timer on the Motorola IDP board.
- *
- *  Input parameters:  NONE
- *
- *  Output parameters:  NONE
- *
- *  NOTE: This routine will not work if the optimizer is enabled
- *        for some compilers.  The multiple writes to the MC68230
- *        may be optimized away.
- *
- *        It is important that the timer start/stop overhead be 
- *        determined when porting or modifying this code.
- *
- *  Code Modified for the MC68230 by Doug McBride, Colorado Space Grant College
- *
- *  COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994.
- *  On-Line Applications Research Corporation (OAR).
- *  All rights assigned to U.S. Government, 1994.
- *
- *  This material may be reproduced by or for the U.S. Government pursuant
- *  to the copyright license under the clause at DFARS 252.227-7013.  This
- *  notice must appear in all copies of this file and its derivatives.
- *
- *  $Id$
- */
-
-
-#include "rtems.h"
-#include "cpu.h"
-#include "bsp.h"
-#include "mc68230.h"
-
-#define TIMER_VECTOR 0x4D
-
-int Ttimer_val;
-rtems_boolean Timer_driver_Find_average_overhead;
-
-rtems_isr timerisr();
-
-void Timer_initialize()
-{
-  (void) set_vector( timerisr, TIMER_VECTOR, 0 );  /* install ISR */
-  
-  Ttimer_val = 0;                          /* clear timer ISR count */
-
-  /* some PI/T initialization stuff here */
-  /* Set up the interrupt vector on the MC68230 chip:
-     TIVR = TIMER_VECTOR; */
-  MC68230_WRITE (TIVR, TIMER_VECTOR);
-
-  /* Set CPRH through CPRL to maximum count to reduce interrupt overhead
-      CPRH = 0xFF;
-      CPRM = 0xFF;
-      CPRL = 0xFF; */
-  MC68230_WRITE (CPRH, 0xFF);
-  MC68230_WRITE (CPRM, 0xFF);
-  MC68230_WRITE (CPRL, 0xFF);
-
-  /* Enable timer and use it as an external periodic interrupt generator
-      TCR = 0xA1; */
-  MC68230_WRITE (TCR, 0xA1);
-
-}
-
-#define AVG_OVERHEAD      9  /* may not be right -- do this later */
-#define LEAST_VALID       10 /* Don't trust a value lower than this */
-
-int Read_timer() 
-{
-  rtems_unsigned8 data;
-  rtems_unsigned8  msb, osb, lsb;
-  rtems_unsigned32 remaining, total;
-
-  /* Disable timer so that timer can be read
-        data = TCR;
-        TCR = (data & 0xFE); */
-  MC68230_READ (TCR, data);
-  MC68230_WRITE (TCR, (data & 0xFE));
-
-  /* Read the counter value
-        msb = CNTRH;
-        osb = CNTRM;
-        lsb = CNTRL; */
-  MC68230_READ (CNTRH, msb);
-  MC68230_READ (CNTRM, osb);
-  MC68230_READ (CNTRL, lsb);
-
-  /* Calculate the time so far */
-  remaining = 0x1000000 - ((msb << 16) + (osb << 8) + lsb);
-  total = (Ttimer_val * 0x1000000) + remaining;
-
-  /* Enable timer so that timer can continue
-	 	TCR = 0xA1; */
-  MC68230_WRITE (TCR, 0xA1);
-
-  /* do not restore old vector */
-  if ( Timer_driver_Find_average_overhead == 1 )
-    return total;          /* in countdown units */
-
-  if ( total < LEAST_VALID )
-    return 0;            /* below timer resolution */
-   
-  /* Clocked at 6.5 Mhz */
-  /* Avoid floating point problems, be lazy, and return the total minus
-     the average overhead */
-  return (total - AVG_OVERHEAD);
-}
-
-rtems_status_code Empty_function( void )
-{
-  return RTEMS_SUCCESSFUL;
-}
-
-void Set_find_average_overhead(
-  rtems_boolean find_flag
-)
-{
-  Timer_driver_Find_average_overhead = find_flag;
-}