1 files changed, 121 insertions, 0 deletions
diff --git a/c/src/lib/libbsp/hppa1.1/simhppa/include/bsp.h b/c/src/lib/libbsp/hppa1.1/simhppa/include/bsp.h
new file mode 100644
index 0000000000..5b53da8b6c
--- /dev/null
+++ b/c/src/lib/libbsp/hppa1.1/simhppa/include/bsp.h
@@ -0,0 +1,121 @@
+/*  bsp.h
+ *
+ *  This include file contains all HP PA-RISC simulator definitions.
+ *
+ *  COPYRIGHT (c) 1989-1997.
+ *  On-Line Applications Research Corporation (OAR).
+ *  Copyright assigned to U.S. Government, 1994.
+ *
+ *  The license and distribution terms for this file may in
+ *  the file LICENSE in this distribution or at
+ *  http://www.OARcorp.com/rtems/license.html.
+ *
+ *  $Id$
+ */
+
+#ifndef __PXFL_BSP_h
+#define __PXFL_BSP_h
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <rtems.h>
+#include <clockdrv.h>
+#include <rtems/ttydrv.h>
+
+/*
+ *  Define the time limits for RTEMS Test Suite test durations.
+ *  Long test and short test duration limits are provided.  These
+ *  values are in seconds and need to be converted to ticks for the
+ *  application.
+ *
+ */
+
+#define MAX_LONG_TEST_DURATION       3   /* 3 seconds */
+#define MAX_SHORT_TEST_DURATION      3   /* 3 seconds */
+
+/*
+ *  Define the interrupt mechanism for Time Test 27
+ */
+
+#define MUST_WAIT_FOR_INTERRUPT 1
+
+#define Install_tm27_vector( handler ) \
+    ( void ) set_vector( handler, HPPA_INTERRUPT_EXTERNAL_INTERVAL_TIMER, 1 );
+
+#define Cause_tm27_intr() \
+  set_itimer( get_itimer() + 20 )
+
+#define Clear_tm27_intr()  \
+  set_eirr( 0x80000000 )
+
+#define Lower_tm27_intr() \
+  { \
+    register unsigned32 ignored; \
+    HPPA_ASM_SSM( HPPA_PSW_I, ignored ); \
+  }
+
+/*
+ *  Simple spin delay in microsecond units for device drivers.
+ *  This is very dependent on the clock speed of the target.
+ */
+
+extern void Clock_delay(rtems_unsigned32 microseconds);
+#define delay( microseconds ) \
+        Clock_delay(microseconds);
+
+/*
+ * Todo: this should be put somewhere else
+ */
+
+#undef CLOCK_DRIVER_TABLE_ENTRY
+#define CLOCK_DRIVER_TABLE_ENTRY { Clock_initialize, NULL, NULL, NULL, NULL, Clock_control }
+rtems_device_driver Clock_control(
+  rtems_device_major_number major,
+  rtems_device_minor_number minor,
+  void *pargp
+);
+
+/*
+ * We printf() to a buffer if multiprocessing, *or* if this is set.
+ * ref: src/lib/libbsp/hppa/pxfl/iosupp/consupp.c
+ */
+
+extern int use_print_buffer;
+
+/*
+ * When not doing printf to a buffer, we do printf thru RTEMS libio
+ * and our tty driver.  Set it up so that console is right.
+ */
+
+#define CONSOLE_DRIVER_TABLE_ENTRY \
+  { tty_initialize, tty_open, tty_close, tty_read, tty_write, tty_control }
+
+/*
+ * How many libio files we want
+ */
+#define BSP_LIBIO_MAX_FDS       20
+
+#define HPPA_INTERRUPT_EXTERNAL_MPCI        HPPA_INTERRUPT_EXTERNAL_10
+
+rtems_isr_entry set_vector(rtems_isr_entry, rtems_vector_number, int);
+
+void bsp_start( void );
+void bsp_cleanup( void );
+
+/* miscellaneous stuff assumed to exist */
+
+extern rtems_configuration_table BSP_Configuration;     /* owned by BSP */
+extern rtems_cpu_table           Cpu_table;             /* owned by BSP */
+
+extern rtems_unsigned32          bsp_isr_level;
+
+extern int cpu_number;         /* from 0; cpu number in a multi cpu system */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+/* end of include file */