1 files changed, 100 insertions, 0 deletions
diff --git a/c/src/lib/libbsp/configure.in b/c/src/lib/libbsp/configure.in
new file mode 100644
index 0000000000..6e07a7eee7
--- /dev/null
+++ b/c/src/lib/libbsp/configure.in
@@ -0,0 +1,100 @@
+dnl Process this file with autoconf to produce a configure script.
+dnl
+dnl $Id$
+
+AC_PREREQ(2.13)
+AC_INIT(README)
+RTEMS_TOP(../../../..)
+AC_CONFIG_AUX_DIR(../../../..)
+
+RTEMS_CANONICAL_TARGET_CPU
+AC_PROG_MAKE_SET
+AC_PROG_INSTALL
+AM_MAINTAINER_MODE
+
+RTEMS_ENABLE_MULTIPROCESSING
+RTEMS_ENABLE_NETWORKING
+RTEMS_ENABLE_LIBCDIR
+RTEMS_ENABLE_BARE
+
+RTEMS_ENV_RTEMSBSP
+
+RTEMS_CHECK_CPU
+RTEMS_CANONICAL_HOST
+
+RTEMS_PROJECT_ROOT
+
+dnl check target cc
+RTEMS_PROG_CC_FOR_TARGET
+RTEMS_CANONICALIZE_TOOLS
+
+dnl if this is an i386, does gas have good code16 support?
+RTEMS_I386_GAS_CODE16
+AM_CONDITIONAL(RTEMS_GAS_CODE16,test "$RTEMS_GAS_CODE16" = "yes");
+
+# find all the Makefiles for the BSPs
+makefiles="$makefiles $RTEMS_CPU/Makefile"
+
+if test "${RTEMS_BSP}" = "bare"; then
+makefiles="$makefiles bare/Makefile"
+fi
+
+RTEMS_CHECK_CUSTOM_BSP(RTEMS_BSP)
+RTEMS_CHECK_MULTIPROCESSING(RTEMS_BSP)
+RTEMS_CHECK_NETWORKING(RTEMS_BSP)
+
+RTEMS_BSP_ALIAS(${RTEMS_BSP},bspdir)
+
+# Is there code where there should be for this BSP?
+# The bare bsp is a special case as it is not under the RTEMS_CPU path
+case ${RTEMS_BSP} in
+  bare)
+    bspcpudir=
+    if test "X${BARE_CPU_CFLAGS}" = "X" ; then
+      AC_MSG_ERROR([--enable-bare-cpu-cflags not specified for bare bsp])
+    fi
+    if test "X${BARE_CPU_MODEL}" = "X" ; then
+      AC_MSG_ERROR([--enable-bare-cpu-model not specified for bare bsp])
+    fi
+    ;;
+  *)
+    bspcpudir=$RTEMS_CPU/
+    ;;
+esac
+
+if test "$RTEMS_BSP" = "bare" ; then
+  RTEMS_LIBBSP_CPU_SUBDIR="bare"
+else
+  RTEMS_LIBBSP_CPU_SUBDIR='$(RTEMS_CPU)'
+fi
+AC_SUBST(RTEMS_LIBBSP_CPU_SUBDIR)
+     
+if test -d "$srcdir/$bspcpudir$bspdir"; then
+  RTEMS_CHECK_MAKEFILE(${bspcpudir}$bspdir)
+  RTEMS_CHECK_MAKEFILE(${bspcpudir}shared)
+
+  # HACK: sed out bsp-tools from makefiles
+  t="$bspcpudir$bspdir/tools"
+  if test -d "$srcdir/$t"; then
+    bsptools_cfgdirs="$bsptools_cfgdirs $t"
+    makefiles=`echo "$makefiles" | sed -e "s%$t/.*Makefile%%g"`
+  fi
+else
+  AC_MSG_ERROR([unable to find libbsp subdirectory ($bspdir) for  ${RTEMS_BSP}])
+fi
+
+if test "$HAS_MP" = "yes"; then
+  makefiles="$makefiles shmdr/Makefile"
+else
+  # HACK: sed out shmsupp/Makefile from makefiles
+  t="$bspcpudir$bspdir/shmsupp"
+  makefiles=`echo "$makefiles" | sed -e "s%$t/.*Makefile%%g"`
+fi
+AM_CONDITIONAL(HAS_MP,test "$HAS_MP" = "yes")
+
+AC_CONFIG_SUBDIRS($bsptools_cfgdirs)
+
+# try to explicitly list a Makefile here 
+AC_OUTPUT( 
+Makefile
+$makefiles)