diff options
Diffstat (limited to '')
-rw-r--r-- | c/src/lib/libbsp/bfin/bf537Stamp/startup/bspstart.c | 22 |
1 files changed, 11 insertions, 11 deletions
diff --git a/c/src/lib/libbsp/bfin/bf537Stamp/startup/bspstart.c b/c/src/lib/libbsp/bfin/bf537Stamp/startup/bspstart.c index 7a54306d75..dc25bbf3bb 100644 --- a/c/src/lib/libbsp/bfin/bf537Stamp/startup/bspstart.c +++ b/c/src/lib/libbsp/bfin/bf537Stamp/startup/bspstart.c @@ -4,7 +4,7 @@ * board, and monitor specific initialization and configuration. * The generic CPU dependent initialization has been performed * before this routine is invoked. - * + * * Copyright (c) 2006 by Atos Automacao Industrial Ltda. * written by Alain Schaefer <alain.schaefer@easc.ch> * and Antonio Giovanini <antonio@atos.com.br> @@ -105,16 +105,16 @@ void bsp_start(void) /* * initPLL - * + * * Routine to initialize the PLL. The BF537 Stamp uses a 27 Mhz XTAL. BISON * See "../bf537Stamp/include/bsp.h" for more information. */ static void initPLL(void) { - + #ifdef BISON unsigned int n; - + /* Configure PLL registers */ *((uint16_t*)PLL_LOCKCNT) = 0x1000; *((uint16_t*)PLL_DIV) = PLL_CSEL|PLL_SSEL; @@ -124,16 +124,16 @@ static void initPLL(void) { asm("cli r0;"); asm("idle;"); asm("sti r0;"); - + /* Delay for PLL stabilization */ - for (n=0; n<200; n++) {} + for (n=0; n<200; n++) {} #endif - + } /* * initEBIU - * + * * Configure extern memory */ @@ -153,8 +153,8 @@ static void initEBIU(void) { *((uint32_t*)EBIU_AMBCTL0) = 0x7bb07bb0L; *((uint32_t*)EBIU_AMBCTL1) = 0x7bb07bb0L; *((uint16_t*)EBIU_AMGCTL) = 0x000f; - - /* Configure SDRAM + + /* Configure SDRAM *((uint32_t*)EBIU_SDGCTL) = 0x0091998d; *((uint16_t*)EBIU_SDBCTL) = 0x0013; *((uint16_t*)EBIU_SDRRC) = 0x0817; @@ -164,7 +164,7 @@ static void initEBIU(void) { /* * initGPIO - * + * * Enable LEDs port */ static void initGPIO(void) { |