diff options
Diffstat (limited to 'c/src/lib/libbsp/arm/stm32f4x/hal/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2c.c')
| -rw-r--r-- | c/src/lib/libbsp/arm/stm32f4x/hal/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2c.c | 3649 |
1 files changed, 3649 insertions, 0 deletions
diff --git a/c/src/lib/libbsp/arm/stm32f4x/hal/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2c.c b/c/src/lib/libbsp/arm/stm32f4x/hal/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2c.c new file mode 100644 index 0000000000..711e1eff77 --- /dev/null +++ b/c/src/lib/libbsp/arm/stm32f4x/hal/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2c.c @@ -0,0 +1,3649 @@ +/** + ****************************************************************************** + * @file stm32f4xx_hal_i2c.c + * @author MCD Application Team + * @version V1.4.0 + * @date 14-August-2015 + * @brief I2C HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Inter Integrated Circuit (I2C) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral Control functions + * + Peripheral State functions + * + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The I2C HAL driver can be used as follows: + + (#) Declare a I2C_HandleTypeDef handle structure, for example: + I2C_HandleTypeDef hi2c; + + (#)Initialize the I2C low level resources by implement the HAL_I2C_MspInit() API: + (##) Enable the I2Cx interface clock + (##) I2C pins configuration + (+++) Enable the clock for the I2C GPIOs + (+++) Configure I2C pins as alternate function open-drain + (##) NVIC configuration if you need to use interrupt process + (+++) Configure the I2Cx interrupt priority + (+++) Enable the NVIC I2C IRQ Channel + (##) DMA Configuration if you need to use DMA process + (+++) Declare a DMA_HandleTypeDef handle structure for the transmit or receive stream + (+++) Enable the DMAx interface clock using + (+++) Configure the DMA handle parameters + (+++) Configure the DMA Tx or Rx Stream + (+++) Associate the initialized DMA handle to the hi2c DMA Tx or Rx handle + (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on + the DMA Tx or Rx Stream + + (#) Configure the Communication Speed, Duty cycle, Addressing mode, Own Address1, + Dual Addressing mode, Own Address2, General call and Nostretch mode in the hi2c Init structure. + + (#) Initialize the I2C registers by calling the HAL_I2C_Init(), configures also the low level Hardware + (GPIO, CLOCK, NVIC...etc) by calling the customized HAL_I2C_MspInit(&hi2c) API. + + (#) To check if target device is ready for communication, use the function HAL_I2C_IsDeviceReady() + + (#) For I2C IO and IO MEM operations, three operation modes are available within this driver : + + *** Polling mode IO operation *** + ================================= + [..] + (+) Transmit in master mode an amount of data in blocking mode using HAL_I2C_Master_Transmit() + (+) Receive in master mode an amount of data in blocking mode using HAL_I2C_Master_Receive() + (+) Transmit in slave mode an amount of data in blocking mode using HAL_I2C_Slave_Transmit() + (+) Receive in slave mode an amount of data in blocking mode using HAL_I2C_Slave_Receive() + + *** Polling mode IO MEM operation *** + ===================================== + [..] + (+) Write an amount of data in blocking mode to a specific memory address using HAL_I2C_Mem_Write() + (+) Read an amount of data in blocking mode from a specific memory address using HAL_I2C_Mem_Read() + + + *** Interrupt mode IO operation *** + =================================== + [..] + (+) Transmit in master mode an amount of data in non blocking mode using HAL_I2C_Master_Transmit_IT() + (+) At transmission end of transfer HAL_I2C_MasterTxCpltCallback is executed and user can + add his own code by customization of function pointer HAL_I2C_MasterTxCpltCallback + (+) Receive in master mode an amount of data in non blocking mode using HAL_I2C_Master_Receive_IT() + (+) At reception end of transfer HAL_I2C_MasterRxCpltCallback is executed and user can + add his own code by customization of function pointer HAL_I2C_MasterRxCpltCallback + (+) Transmit in slave mode an amount of data in non blocking mode using HAL_I2C_Slave_Transmit_IT() + (+) At transmission end of transfer HAL_I2C_SlaveTxCpltCallback is executed and user can + add his own code by customization of function pointer HAL_I2C_SlaveTxCpltCallback + (+) Receive in slave mode an amount of data in non blocking mode using HAL_I2C_Slave_Receive_IT() + (+) At reception end of transfer HAL_I2C_SlaveRxCpltCallback is executed and user can + add his own code by customization of function pointer HAL_I2C_SlaveRxCpltCallback + (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and user can + add his own code by customization of function pointer HAL_I2C_ErrorCallback + + *** Interrupt mode IO MEM operation *** + ======================================= + [..] + (+) Write an amount of data in no-blocking mode with Interrupt to a specific memory address using + HAL_I2C_Mem_Write_IT() + (+) At MEM end of write transfer HAL_I2C_MemTxCpltCallback is executed and user can + add his own code by customization of function pointer HAL_I2C_MemTxCpltCallback + (+) Read an amount of data in no-blocking mode with Interrupt from a specific memory address using + HAL_I2C_Mem_Read_IT() + (+) At MEM end of read transfer HAL_I2C_MemRxCpltCallback is executed and user can + add his own code by customization of function pointer HAL_I2C_MemRxCpltCallback + (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and user can + add his own code by customization of function pointer HAL_I2C_ErrorCallback + + *** DMA mode IO operation *** + ============================== + [..] + (+) Transmit in master mode an amount of data in non blocking mode (DMA) using + HAL_I2C_Master_Transmit_DMA() + (+) At transmission end of transfer HAL_I2C_MasterTxCpltCallback is executed and user can + add his own code by customization of function pointer HAL_I2C_MasterTxCpltCallback + (+) Receive in master mode an amount of data in non blocking mode (DMA) using + HAL_I2C_Master_Receive_DMA() + (+) At reception end of transfer HAL_I2C_MasterRxCpltCallback is executed and user can + add his own code by customization of function pointer HAL_I2C_MasterRxCpltCallback + (+) Transmit in slave mode an amount of data in non blocking mode (DMA) using + HAL_I2C_Slave_Transmit_DMA() + (+) At transmission end of transfer HAL_I2C_SlaveTxCpltCallback is executed and user can + add his own code by customization of function pointer HAL_I2C_SlaveTxCpltCallback + (+) Receive in slave mode an amount of data in non blocking mode (DMA) using + HAL_I2C_Slave_Receive_DMA() + (+) At reception end of transfer HAL_I2C_SlaveRxCpltCallback is executed and user can + add his own code by customization of function pointer HAL_I2C_SlaveRxCpltCallback + (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and user can + add his own code by customization of function pointer HAL_I2C_ErrorCallback + + *** DMA mode IO MEM operation *** + ================================= + [..] + (+) Write an amount of data in no-blocking mode with DMA to a specific memory address using + HAL_I2C_Mem_Write_DMA() + (+) At MEM end of write transfer HAL_I2C_MemTxCpltCallback is executed and user can + add his own code by customization of function pointer HAL_I2C_MemTxCpltCallback + (+) Read an amount of data in no-blocking mode with DMA from a specific memory address using + HAL_I2C_Mem_Read_DMA() + (+) At MEM end of read transfer HAL_I2C_MemRxCpltCallback is executed and user can + add his own code by customization of function pointer HAL_I2C_MemRxCpltCallback + (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and user can + add his own code by customization of function pointer HAL_I2C_ErrorCallback + + + *** I2C HAL driver macros list *** + ================================== + [..] + Below the list of most used macros in I2C HAL driver. + + (+) __HAL_I2C_ENABLE: Enable the I2C peripheral + (+) __HAL_I2C_DISABLE: Disable the I2C peripheral + (+) __HAL_I2C_GET_FLAG : Checks whether the specified I2C flag is set or not + (+) __HAL_I2C_CLEAR_FLAG : Clear the specified I2C pending flag + (+) __HAL_I2C_ENABLE_IT: Enable the specified I2C interrupt + (+) __HAL_I2C_DISABLE_IT: Disable the specified I2C interrupt + + [..] + (@) You can refer to the I2C HAL driver header file for more useful macros + + + @endverbatim + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal.h" + +/** @addtogroup STM32F4xx_HAL_Driver + * @{ + */ + +/** @defgroup I2C I2C + * @brief I2C HAL module driver + * @{ + */ + +#ifdef HAL_I2C_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @addtogroup I2C_Private_Constants + * @{ + */ +#define I2C_TIMEOUT_FLAG ((uint32_t)35) /* 35 ms */ +#define I2C_TIMEOUT_ADDR_SLAVE ((uint32_t)10000) /* 10 s */ +#define I2C_TIMEOUT_BUSY_FLAG ((uint32_t)10000) /* 10 s */ +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @addtogroup I2C_Private_Functions + * @{ + */ +static void I2C_DMAMasterTransmitCplt(DMA_HandleTypeDef *hdma); +static void I2C_DMAMasterReceiveCplt(DMA_HandleTypeDef *hdma); +static void I2C_DMASlaveTransmitCplt(DMA_HandleTypeDef *hdma); +static void I2C_DMASlaveReceiveCplt(DMA_HandleTypeDef *hdma); +static void I2C_DMAMemTransmitCplt(DMA_HandleTypeDef *hdma); +static void I2C_DMAMemReceiveCplt(DMA_HandleTypeDef *hdma); +static void I2C_DMAError(DMA_HandleTypeDef *hdma); + +static HAL_StatusTypeDef I2C_MasterRequestWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Timeout); +static HAL_StatusTypeDef I2C_MasterRequestRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Timeout); +static HAL_StatusTypeDef I2C_RequestMemoryWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout); +static HAL_StatusTypeDef I2C_RequestMemoryRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout); +static HAL_StatusTypeDef I2C_WaitOnFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, FlagStatus Status, uint32_t Timeout); +static HAL_StatusTypeDef I2C_WaitOnMasterAddressFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, uint32_t Timeout); + +static HAL_StatusTypeDef I2C_MasterTransmit_TXE(I2C_HandleTypeDef *hi2c); +static HAL_StatusTypeDef I2C_MasterTransmit_BTF(I2C_HandleTypeDef *hi2c); +static HAL_StatusTypeDef I2C_MasterReceive_RXNE(I2C_HandleTypeDef *hi2c); +static HAL_StatusTypeDef I2C_MasterReceive_BTF(I2C_HandleTypeDef *hi2c); + +static HAL_StatusTypeDef I2C_SlaveTransmit_TXE(I2C_HandleTypeDef *hi2c); +static HAL_StatusTypeDef I2C_SlaveTransmit_BTF(I2C_HandleTypeDef *hi2c); +static HAL_StatusTypeDef I2C_SlaveReceive_RXNE(I2C_HandleTypeDef *hi2c); +static HAL_StatusTypeDef I2C_SlaveReceive_BTF(I2C_HandleTypeDef *hi2c); +static HAL_StatusTypeDef I2C_Slave_ADDR(I2C_HandleTypeDef *hi2c); +static HAL_StatusTypeDef I2C_Slave_STOPF(I2C_HandleTypeDef *hi2c); +static HAL_StatusTypeDef I2C_Slave_AF(I2C_HandleTypeDef *hi2c); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup I2C_Exported_Functions I2C Exported Functions + * @{ + */ + +/** @defgroup I2C_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This subsection provides a set of functions allowing to initialize and + de-initialize the I2Cx peripheral: + + (+) User must Implement HAL_I2C_MspInit() function in which he configures + all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC). + + (+) Call the function HAL_I2C_Init() to configure the selected device with + the selected configuration: + (++) Communication Speed + (++) Duty cycle + (++) Addressing mode + (++) Own Address 1 + (++) Dual Addressing mode + (++) Own Address 2 + (++) General call mode + (++) Nostretch mode + + (+) Call the function HAL_I2C_DeInit() to restore the default configuration + of the selected I2Cx peripheral. + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the I2C according to the specified parameters + * in the I2C_InitTypeDef and create the associated handle. + * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c) +{ + uint32_t freqrange = 0; + uint32_t pclk1 = 0; + + /* Check the I2C handle allocation */ + if(hi2c == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); + assert_param(IS_I2C_CLOCK_SPEED(hi2c->Init.ClockSpeed)); + assert_param(IS_I2C_DUTY_CYCLE(hi2c->Init.DutyCycle)); + assert_param(IS_I2C_OWN_ADDRESS1(hi2c->Init.OwnAddress1)); + assert_param(IS_I2C_ADDRESSING_MODE(hi2c->Init.AddressingMode)); + assert_param(IS_I2C_DUAL_ADDRESS(hi2c->Init.DualAddressMode)); + assert_param(IS_I2C_OWN_ADDRESS2(hi2c->Init.OwnAddress2)); + assert_param(IS_I2C_GENERAL_CALL(hi2c->Init.GeneralCallMode)); + assert_param(IS_I2C_NO_STRETCH(hi2c->Init.NoStretchMode)); + + if(hi2c->State == HAL_I2C_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hi2c->Lock = HAL_UNLOCKED; + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + HAL_I2C_MspInit(hi2c); + } + + hi2c->State = HAL_I2C_STATE_BUSY; + + /* Disable the selected I2C peripheral */ + __HAL_I2C_DISABLE(hi2c); + + /* Get PCLK1 frequency */ + pclk1 = HAL_RCC_GetPCLK1Freq(); + + /* Calculate frequency range */ + freqrange = I2C_FREQRANGE(pclk1); + + /*---------------------------- I2Cx CR2 Configuration ----------------------*/ + /* Configure I2Cx: Frequency range */ + hi2c->Instance->CR2 = freqrange; + + /*---------------------------- I2Cx TRISE Configuration --------------------*/ + /* Configure I2Cx: Rise Time */ + hi2c->Instance->TRISE = I2C_RISE_TIME(freqrange, hi2c->Init.ClockSpeed); + + /*---------------------------- I2Cx CCR Configuration ----------------------*/ + /* Configure I2Cx: Speed */ + hi2c->Instance->CCR = I2C_SPEED(pclk1, hi2c->Init.ClockSpeed, hi2c->Init.DutyCycle); + + /*---------------------------- I2Cx CR1 Configuration ----------------------*/ + /* Configure I2Cx: Generalcall and NoStretch mode */ + hi2c->Instance->CR1 = (hi2c->Init.GeneralCallMode | hi2c->Init.NoStretchMode); + + /*---------------------------- I2Cx OAR1 Configuration ---------------------*/ + /* Configure I2Cx: Own Address1 and addressing mode */ + hi2c->Instance->OAR1 = (hi2c->Init.AddressingMode | hi2c->Init.OwnAddress1); + + /*---------------------------- I2Cx OAR2 Configuration ---------------------*/ + /* Configure I2Cx: Dual mode and Own Address2 */ + hi2c->Instance->OAR2 = (hi2c->Init.DualAddressMode | hi2c->Init.OwnAddress2); + + /* Enable the selected I2C peripheral */ + __HAL_I2C_ENABLE(hi2c); + + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + hi2c->State = HAL_I2C_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the I2C peripheral. + * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_DeInit(I2C_HandleTypeDef *hi2c) +{ + /* Check the I2C handle allocation */ + if(hi2c == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); + + hi2c->State = HAL_I2C_STATE_BUSY; + + /* Disable the I2C Peripheral Clock */ + __HAL_I2C_DISABLE(hi2c); + + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + HAL_I2C_MspDeInit(hi2c); + + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + hi2c->State = HAL_I2C_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; +} + +/** + * @brief I2C MSP Init. + * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @retval None + */ + __weak void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c) +{ + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_I2C_MspInit could be implemented in the user file + */ +} + +/** + * @brief I2C MSP DeInit + * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @retval None + */ + __weak void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c) +{ + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_I2C_MspDeInit could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup I2C_Exported_Functions_Group2 IO operation functions + * @brief Data transfers functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the I2C data + transfers. + + (#) There are two modes of transfer: + (++) Blocking mode : The communication is performed in the polling mode. + The status of all data processing is returned by the same function + after finishing transfer. + (++) No-Blocking mode : The communication is performed using Interrupts + or DMA. These functions return the status of the transfer startup. + The end of the data processing will be indicated through the + dedicated I2C IRQ when using Interrupt mode or the DMA IRQ when + using DMA mode. + + (#) Blocking mode functions are : + (++) HAL_I2C_Master_Transmit() + (++) HAL_I2C_Master_Receive() + (++) HAL_I2C_Slave_Transmit() + (++) HAL_I2C_Slave_Receive() + (++) HAL_I2C_Mem_Write() + (++) HAL_I2C_Mem_Read() + (++) HAL_I2C_IsDeviceReady() + + (#) No-Blocking mode functions with Interrupt are : + (++) HAL_I2C_Master_Transmit_IT() + (++) HAL_I2C_Master_Receive_IT() + (++) HAL_I2C_Slave_Transmit_IT() + (++) HAL_I2C_Slave_Receive_IT() + (++) HAL_I2C_Mem_Write_IT() + (++) HAL_I2C_Mem_Read_IT() + + (#) No-Blocking mode functions with DMA are : + (++) HAL_I2C_Master_Transmit_DMA() + (++) HAL_I2C_Master_Receive_DMA() + (++) HAL_I2C_Slave_Transmit_DMA() + (++) HAL_I2C_Slave_Receive_DMA() + (++) HAL_I2C_Mem_Write_DMA() + (++) HAL_I2C_Mem_Read_DMA() + + (#) A set of Transfer Complete Callbacks are provided in non Blocking mode: + (++) HAL_I2C_MemTxCpltCallback() + (++) HAL_I2C_MemRxCpltCallback() + (++) HAL_I2C_MasterTxCpltCallback() + (++) HAL_I2C_MasterRxCpltCallback() + (++) HAL_I2C_SlaveTxCpltCallback() + (++) HAL_I2C_SlaveRxCpltCallback() + (++) HAL_I2C_ErrorCallback() + +@endverbatim + * @{ + */ + +/** + * @brief Transmits in master mode an amount of data in blocking mode. + * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @param DevAddress: Target device address + * @param pData: Pointer to data buffer + * @param Size: Amount of data to be sent + * @param Timeout: Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + if(hi2c->State == HAL_I2C_STATE_READY) + { + if((pData == NULL) || (Size == 0)) + { + return HAL_ERROR; + } + + /* Wait until BUSY flag is reset */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Disable Pos */ + hi2c->Instance->CR1 &= ~I2C_CR1_POS; + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Send Slave Address */ + if(I2C_MasterRequestWrite(hi2c, DevAddress, Timeout) != HAL_OK) + { + if(hi2c->ErrorCode == HAL_I2C_ERROR_AF) + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_ERROR; + } + else + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_TIMEOUT; + } + } + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + + while(Size > 0) + { + /* Wait until TXE flag is set */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TXE, RESET, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* Write data to DR */ + hi2c->Instance->DR = (*pData++); + Size--; + + if((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BTF) == SET) && (Size != 0)) + { + /* Write data to DR */ + hi2c->Instance->DR = (*pData++); + Size--; + } + } + + /* Wait until TXE flag is set */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TXE, RESET, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* Generate Stop */ + hi2c->Instance->CR1 |= I2C_CR1_STOP; + + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receives in master mode an amount of data in blocking mode. + * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @param DevAddress: Target device address + * @param pData: Pointer to data buffer + * @param Size: Amount of data to be sent + * @param Timeout: Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + if(hi2c->State == HAL_I2C_STATE_READY) + { + if((pData == NULL) || (Size == 0)) + { + return HAL_ERROR; + } + + /* Wait until BUSY flag is reset */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Disable Pos */ + hi2c->Instance->CR1 &= ~I2C_CR1_POS; + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Send Slave Address */ + if(I2C_MasterRequestRead(hi2c, DevAddress, Timeout) != HAL_OK) + { + if(hi2c->ErrorCode == HAL_I2C_ERROR_AF) + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_ERROR; + } + else + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_TIMEOUT; + } + } + + if(Size == 1) + { + /* Disable Acknowledge */ + hi2c->Instance->CR1 &= ~I2C_CR1_ACK; + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + + /* Generate Stop */ + hi2c->Instance->CR1 |= I2C_CR1_STOP; + } + else if(Size == 2) + { + /* Disable Acknowledge */ + hi2c->Instance->CR1 &= ~I2C_CR1_ACK; + + /* Enable Pos */ + hi2c->Instance->CR1 |= I2C_CR1_POS; + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + } + else + { + /* Enable Acknowledge */ + hi2c->Instance->CR1 |= I2C_CR1_ACK; + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + } + + while(Size > 0) + { + if(Size <= 3) + { + /* One byte */ + if(Size == 1) + { + /* Wait until RXNE flag is set */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_RXNE, RESET, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* Read data from DR */ + (*pData++) = hi2c->Instance->DR; + Size--; + } + /* Two bytes */ + else if(Size == 2) + { + /* Wait until BTF flag is set */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BTF, RESET, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* Generate Stop */ + hi2c->Instance->CR1 |= I2C_CR1_STOP; + + /* Read data from DR */ + (*pData++) = hi2c->Instance->DR; + Size--; + + /* Read data from DR */ + (*pData++) = hi2c->Instance->DR; + Size--; + } + /* 3 Last bytes */ + else + { + /* Wait until BTF flag is set */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BTF, RESET, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* Disable Acknowledge */ + hi2c->Instance->CR1 &= ~I2C_CR1_ACK; + + /* Read data from DR */ + (*pData++) = hi2c->Instance->DR; + Size--; + + /* Wait until BTF flag is set */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BTF, RESET, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* Generate Stop */ + hi2c->Instance->CR1 |= I2C_CR1_STOP; + + /* Read data from DR */ + (*pData++) = hi2c->Instance->DR; + Size--; + + /* Read data from DR */ + (*pData++) = hi2c->Instance->DR; + Size--; + } + } + else + { + /* Wait until RXNE flag is set */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_RXNE, RESET, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* Read data from DR */ + (*pData++) = hi2c->Instance->DR; + Size--; + + if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BTF) == SET) + { + /* Read data from DR */ + (*pData++) = hi2c->Instance->DR; + Size--; + } + } + } + + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmits in slave mode an amount of data in blocking mode. + * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @param pData: Pointer to data buffer + * @param Size: Amount of data to be sent + * @param Timeout: Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + if(hi2c->State == HAL_I2C_STATE_READY) + { + if((pData == NULL) || (Size == 0)) + { + return HAL_ERROR; + } + + /* Wait until BUSY flag is reset */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Disable Pos */ + hi2c->Instance->CR1 &= ~I2C_CR1_POS; + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR1 |= I2C_CR1_ACK; + + /* Wait until ADDR flag is set */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + + /* If 10bit addressing mode is selected */ + if(hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT) + { + /* Wait until ADDR flag is set */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + } + + while(Size > 0) + { + /* Wait until TXE flag is set */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TXE, RESET, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* Write data to DR */ + hi2c->Instance->DR = (*pData++); + Size--; + + if((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BTF) == SET) && (Size != 0)) + { + /* Write data to DR */ + hi2c->Instance->DR = (*pData++); + Size--; + } + } + + /* Wait until AF flag is set */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_AF, RESET, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* Clear AF flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Disable Address Acknowledge */ + hi2c->Instance->CR1 &= ~I2C_CR1_ACK; + + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive in slave mode an amount of data in blocking mode + * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @param pData: Pointer to data buffer + * @param Size: Amount of data to be sent + * @param Timeout: Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + if(hi2c->State == HAL_I2C_STATE_READY) + { + if((pData == NULL) || (Size == 0)) + { + return HAL_ERROR; + } + + /* Wait until BUSY flag is reset */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Disable Pos */ + hi2c->Instance->CR1 &= ~I2C_CR1_POS; + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR1 |= I2C_CR1_ACK; + + /* Wait until ADDR flag is set */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + + while(Size > 0) + { + /* Wait until RXNE flag is set */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_RXNE, RESET, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* Read data from DR */ + (*pData++) = hi2c->Instance->DR; + Size--; + + if((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BTF) == SET) && (Size != 0)) + { + /* Read data from DR */ + (*pData++) = hi2c->Instance->DR; + Size--; + } + } + + /* Wait until STOP flag is set */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_STOPF, RESET, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* Clear STOP flag */ + __HAL_I2C_CLEAR_STOPFLAG(hi2c); + + /* Disable Address Acknowledge */ + hi2c->Instance->CR1 &= ~I2C_CR1_ACK; + + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmit in master mode an amount of data in no-blocking mode with Interrupt + * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @param DevAddress: Target device address + * @param pData: Pointer to data buffer + * @param Size: Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size) +{ + if(hi2c->State == HAL_I2C_STATE_READY) + { + if((pData == NULL) || (Size == 0)) + { + return HAL_ERROR; + } + + /* Wait until BUSY flag is reset */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Disable Pos */ + hi2c->Instance->CR1 &= ~I2C_CR1_POS; + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + hi2c->pBuffPtr = pData; + hi2c->XferSize = Size; + hi2c->XferCount = Size; + + /* Send Slave Address */ + if(I2C_MasterRequestWrite(hi2c, DevAddress, I2C_TIMEOUT_FLAG) != HAL_OK) + { + if(hi2c->ErrorCode == HAL_I2C_ERROR_AF) + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_ERROR; + } + else + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_TIMEOUT; + } + } + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable EVT, BUF and ERR interrupt */ + __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive in master mode an amount of data in no-blocking mode with Interrupt + * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @param DevAddress: Target device address + * @param pData: Pointer to data buffer + * @param Size: Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size) +{ + if(hi2c->State == HAL_I2C_STATE_READY) + { + if((pData == NULL) || (Size == 0)) + { + return HAL_ERROR; + } + + /* Wait until BUSY flag is reset */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Disable Pos */ + hi2c->Instance->CR1 &= ~I2C_CR1_POS; + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + hi2c->pBuffPtr = pData; + hi2c->XferSize = Size; + hi2c->XferCount = Size; + + /* Send Slave Address */ + if(I2C_MasterRequestRead(hi2c, DevAddress, I2C_TIMEOUT_FLAG) != HAL_OK) + { + if(hi2c->ErrorCode == HAL_I2C_ERROR_AF) + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_ERROR; + } + else + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_TIMEOUT; + } + } + + if(hi2c->XferCount == 1) + { + /* Disable Acknowledge */ + hi2c->Instance->CR1 &= ~I2C_CR1_ACK; + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + + /* Generate Stop */ + hi2c->Instance->CR1 |= I2C_CR1_STOP; + } + else if(hi2c->XferCount == 2) + { + /* Disable Acknowledge */ + hi2c->Instance->CR1 &= ~I2C_CR1_ACK; + + /* Enable Pos */ + hi2c->Instance->CR1 |= I2C_CR1_POS; + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + } + else + { + /* Enable Acknowledge */ + hi2c->Instance->CR1 |= I2C_CR1_ACK; + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable EVT, BUF and ERR interrupt */ + __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmit in slave mode an amount of data in no-blocking mode with Interrupt + * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @param pData: Pointer to data buffer + * @param Size: Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size) +{ + if(hi2c->State == HAL_I2C_STATE_READY) + { + if((pData == NULL) || (Size == 0)) + { + return HAL_ERROR; + } + + /* Wait until BUSY flag is reset */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Disable Pos */ + hi2c->Instance->CR1 &= ~I2C_CR1_POS; + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + hi2c->pBuffPtr = pData; + hi2c->XferSize = Size; + hi2c->XferCount = Size; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR1 |= I2C_CR1_ACK; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable EVT, BUF and ERR interrupt */ + __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive in slave mode an amount of data in no-blocking mode with Interrupt + * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @param pData: Pointer to data buffer + * @param Size: Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size) +{ + if(hi2c->State == HAL_I2C_STATE_READY) + { + if((pData == NULL) || (Size == 0)) + { + return HAL_ERROR; + } + + /* Wait until BUSY flag is reset */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Disable Pos */ + hi2c->Instance->CR1 &= ~I2C_CR1_POS; + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + hi2c->pBuffPtr = pData; + hi2c->XferSize = Size; + hi2c->XferCount = Size; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR1 |= I2C_CR1_ACK; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable EVT, BUF and ERR interrupt */ + __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmit in master mode an amount of data in no-blocking mode with DMA + * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @param DevAddress: Target device address + * @param pData: Pointer to data buffer + * @param Size: Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size) +{ + if(hi2c->State == HAL_I2C_STATE_READY) + { + if((pData == NULL) || (Size == 0)) + { + return HAL_ERROR; + } + + /* Wait until BUSY flag is reset */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Disable Pos */ + hi2c->Instance->CR1 &= ~I2C_CR1_POS; + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + hi2c->pBuffPtr = pData; + hi2c->XferSize = Size; + hi2c->XferCount = Size; + + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmatx->XferCpltCallback = I2C_DMAMasterTransmitCplt; + + /* Set the DMA error callback */ + hi2c->hdmatx->XferErrorCallback = I2C_DMAError; + + /* Enable the DMA Stream */ + HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->DR, Size); + + /* Send Slave Address */ + if(I2C_MasterRequestWrite(hi2c, DevAddress, I2C_TIMEOUT_FLAG) != HAL_OK) + { + if(hi2c->ErrorCode == HAL_I2C_ERROR_AF) + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_ERROR; + } + else + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_TIMEOUT; + } + } + + /* Enable DMA Request */ + hi2c->Instance->CR2 |= I2C_CR2_DMAEN; + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive in master mode an amount of data in no-blocking mode with DMA + * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @param DevAddress: Target device address + * @param pData: Pointer to data buffer + * @param Size: Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size) +{ + if(hi2c->State == HAL_I2C_STATE_READY) + { + if((pData == NULL) || (Size == 0)) + { + return HAL_ERROR; + } + + /* Wait until BUSY flag is reset */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Disable Pos */ + hi2c->Instance->CR1 &= ~I2C_CR1_POS; + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + hi2c->pBuffPtr = pData; + hi2c->XferSize = Size; + hi2c->XferCount = Size; + + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmarx->XferCpltCallback = I2C_DMAMasterReceiveCplt; + + /* Set the DMA error callback */ + hi2c->hdmarx->XferErrorCallback = I2C_DMAError; + + /* Enable the DMA Stream */ + HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->DR, (uint32_t)pData, Size); + + /* Send Slave Address */ + if(I2C_MasterRequestRead(hi2c, DevAddress, I2C_TIMEOUT_FLAG) != HAL_OK) + { + if(hi2c->ErrorCode == HAL_I2C_ERROR_AF) + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_ERROR; + } + else + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_TIMEOUT; + } + } + + if(Size == 1) + { + /* Disable Acknowledge */ + hi2c->Instance->CR1 &= ~I2C_CR1_ACK; + } + else + { + /* Enable Last DMA bit */ + hi2c->Instance->CR2 |= I2C_CR2_LAST; + } + + /* Enable DMA Request */ + hi2c->Instance->CR2 |= I2C_CR2_DMAEN; + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmit in slave mode an amount of data in no-blocking mode with DMA + * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @param pData: Pointer to data buffer + * @param Size: Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size) +{ + if(hi2c->State == HAL_I2C_STATE_READY) + { + if((pData == NULL) || (Size == 0)) + { + return HAL_ERROR; + } + + /* Wait until BUSY flag is reset */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Disable Pos */ + hi2c->Instance->CR1 &= ~I2C_CR1_POS; + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + hi2c->pBuffPtr = pData; + hi2c->XferSize = Size; + hi2c->XferCount = Size; + + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmatx->XferCpltCallback = I2C_DMASlaveTransmitCplt; + + /* Set the DMA error callback */ + hi2c->hdmatx->XferErrorCallback = I2C_DMAError; + + /* Enable the DMA Stream */ + HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->DR, Size); + + /* Enable DMA Request */ + hi2c->Instance->CR2 |= I2C_CR2_DMAEN; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR1 |= I2C_CR1_ACK; + + /* Wait until ADDR flag is set */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, I2C_TIMEOUT_ADDR_SLAVE) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* If 7bit addressing mode is selected */ + if(hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_7BIT) + { + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + } + else + { + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + + /* Wait until ADDR flag is set */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, I2C_TIMEOUT_ADDR_SLAVE) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive in slave mode an amount of data in no-blocking mode with DMA + * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @param pData: Pointer to data buffer + * @param Size: Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size) +{ + if(hi2c->State == HAL_I2C_STATE_READY) + { + if((pData == NULL) || (Size == 0)) + { + return HAL_ERROR; + } + + /* Wait until BUSY flag is reset */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Disable Pos */ + hi2c->Instance->CR1 &= ~I2C_CR1_POS; + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + hi2c->pBuffPtr = pData; + hi2c->XferSize = Size; + hi2c->XferCount = Size; + + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmarx->XferCpltCallback = I2C_DMASlaveReceiveCplt; + + /* Set the DMA error callback */ + hi2c->hdmarx->XferErrorCallback = I2C_DMAError; + + /* Enable the DMA Stream */ + HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->DR, (uint32_t)pData, Size); + + /* Enable DMA Request */ + hi2c->Instance->CR2 |= I2C_CR2_DMAEN; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR1 |= I2C_CR1_ACK; + + /* Wait until ADDR flag is set */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, I2C_TIMEOUT_ADDR_SLAVE) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} +/** + * @brief Write an amount of data in blocking mode to a specific memory address + * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @param DevAddress: Target device address + * @param MemAddress: Internal memory address + * @param MemAddSize: Size of internal memory address + * @param pData: Pointer to data buffer + * @param Size: Amount of data to be sent + * @param Timeout: Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if(hi2c->State == HAL_I2C_STATE_READY) + { + if((pData == NULL) || (Size == 0)) + { + return HAL_ERROR; + } + + /* Wait until BUSY flag is reset */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Disable Pos */ + hi2c->Instance->CR1 &= ~I2C_CR1_POS; + + hi2c->State = HAL_I2C_STATE_MEM_BUSY_TX; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Send Slave Address and Memory Address */ + if(I2C_RequestMemoryWrite(hi2c, DevAddress, MemAddress, MemAddSize, Timeout) != HAL_OK) + { + if(hi2c->ErrorCode == HAL_I2C_ERROR_AF) + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_ERROR; + } + else + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_TIMEOUT; + } + } + + while(Size > 0) + { + /* Wait until TXE flag is set */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TXE, RESET, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* Write data to DR */ + hi2c->Instance->DR = (*pData++); + Size--; + + if((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BTF) == SET) && (Size != 0)) + { + /* Write data to DR */ + hi2c->Instance->DR = (*pData++); + Size--; + } + } + + /* Wait until TXE flag is set */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TXE, RESET, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* Generate Stop */ + hi2c->Instance->CR1 |= I2C_CR1_STOP; + + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Read an amount of data in blocking mode from a specific memory address + * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @param DevAddress: Target device address + * @param MemAddress: Internal memory address + * @param MemAddSize: Size of internal memory address + * @param pData: Pointer to data buffer + * @param Size: Amount of data to be sent + * @param Timeout: Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if(hi2c->State == HAL_I2C_STATE_READY) + { + if((pData == NULL) || (Size == 0)) + { + return HAL_ERROR; + } + + /* Wait until BUSY flag is reset */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Disable Pos */ + hi2c->Instance->CR1 &= ~I2C_CR1_POS; + + hi2c->State = HAL_I2C_STATE_MEM_BUSY_RX; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Send Slave Address and Memory Address */ + if(I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, Timeout) != HAL_OK) + { + if(hi2c->ErrorCode == HAL_I2C_ERROR_AF) + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_ERROR; + } + else + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_TIMEOUT; + } + } + + if(Size == 1) + { + /* Disable Acknowledge */ + hi2c->Instance->CR1 &= ~I2C_CR1_ACK; + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + + /* Generate Stop */ + hi2c->Instance->CR1 |= I2C_CR1_STOP; + } + else if(Size == 2) + { + /* Disable Acknowledge */ + hi2c->Instance->CR1 &= ~I2C_CR1_ACK; + + /* Enable Pos */ + hi2c->Instance->CR1 |= I2C_CR1_POS; + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + } + else + { + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + } + + while(Size > 0) + { + if(Size <= 3) + { + /* One byte */ + if(Size== 1) + { + /* Wait until RXNE flag is set */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_RXNE, RESET, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* Read data from DR */ + (*pData++) = hi2c->Instance->DR; + Size--; + } + /* Two bytes */ + else if(Size == 2) + { + /* Wait until BTF flag is set */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BTF, RESET, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* Generate Stop */ + hi2c->Instance->CR1 |= I2C_CR1_STOP; + + /* Read data from DR */ + (*pData++) = hi2c->Instance->DR; + Size--; + + /* Read data from DR */ + (*pData++) = hi2c->Instance->DR; + Size--; + } + /* 3 Last bytes */ + else + { + /* Wait until BTF flag is set */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BTF, RESET, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* Disable Acknowledge */ + hi2c->Instance->CR1 &= ~I2C_CR1_ACK; + + /* Read data from DR */ + (*pData++) = hi2c->Instance->DR; + Size--; + + /* Wait until BTF flag is set */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BTF, RESET, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* Generate Stop */ + hi2c->Instance->CR1 |= I2C_CR1_STOP; + + /* Read data from DR */ + (*pData++) = hi2c->Instance->DR; + Size--; + + /* Read data from DR */ + (*pData++) = hi2c->Instance->DR; + Size--; + } + } + else + { + /* Wait until RXNE flag is set */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_RXNE, RESET, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* Read data from DR */ + (*pData++) = hi2c->Instance->DR; + Size--; + + if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BTF) == SET) + { + /* Read data from DR */ + (*pData++) = hi2c->Instance->DR; + Size--; + } + } + } + + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} +/** + * @brief Write an amount of data in no-blocking mode with Interrupt to a specific memory address + * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @param DevAddress: Target device address + * @param MemAddress: Internal memory address + * @param MemAddSize: Size of internal memory address + * @param pData: Pointer to data buffer + * @param Size: Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size) +{ + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if(hi2c->State == HAL_I2C_STATE_READY) + { + if((pData == NULL) || (Size == 0)) + { + return HAL_ERROR; + } + + /* Wait until BUSY flag is reset */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Disable Pos */ + hi2c->Instance->CR1 &= ~I2C_CR1_POS; + + hi2c->State = HAL_I2C_STATE_MEM_BUSY_TX; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + hi2c->pBuffPtr = pData; + hi2c->XferSize = Size; + hi2c->XferCount = Size; + + /* Send Slave Address and Memory Address */ + if(I2C_RequestMemoryWrite(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG) != HAL_OK) + { + if(hi2c->ErrorCode == HAL_I2C_ERROR_AF) + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_ERROR; + } + else + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_TIMEOUT; + } + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable EVT, BUF and ERR interrupt */ + __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Read an amount of data in no-blocking mode with Interrupt from a specific memory address + * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @param DevAddress: Target device address + * @param MemAddress: Internal memory address + * @param MemAddSize: Size of internal memory address + * @param pData: Pointer to data buffer + * @param Size: Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size) +{ + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if(hi2c->State == HAL_I2C_STATE_READY) + { + if((pData == NULL) || (Size == 0)) + { + return HAL_ERROR; + } + + /* Wait until BUSY flag is reset */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Disable Pos */ + hi2c->Instance->CR1 &= ~I2C_CR1_POS; + + hi2c->State = HAL_I2C_STATE_MEM_BUSY_RX; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + hi2c->pBuffPtr = pData; + hi2c->XferSize = Size; + hi2c->XferCount = Size; + + /* Send Slave Address and Memory Address */ + if(I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG) != HAL_OK) + { + if(hi2c->ErrorCode == HAL_I2C_ERROR_AF) + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_ERROR; + } + else + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_TIMEOUT; + } + } + + if(hi2c->XferCount == 1) + { + /* Disable Acknowledge */ + hi2c->Instance->CR1 &= ~I2C_CR1_ACK; + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + + /* Generate Stop */ + hi2c->Instance->CR1 |= I2C_CR1_STOP; + } + else if(hi2c->XferCount == 2) + { + /* Disable Acknowledge */ + hi2c->Instance->CR1 &= ~I2C_CR1_ACK; + + /* Enable Pos */ + hi2c->Instance->CR1 |= I2C_CR1_POS; + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + } + else + { + /* Enable Acknowledge */ + hi2c->Instance->CR1 |= I2C_CR1_ACK; + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable EVT, BUF and ERR interrupt */ + __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} +/** + * @brief Write an amount of data in no-blocking mode with DMA to a specific memory address + * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @param DevAddress: Target device address + * @param MemAddress: Internal memory address + * @param MemAddSize: Size of internal memory address + * @param pData: Pointer to data buffer + * @param Size: Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size) +{ + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if(hi2c->State == HAL_I2C_STATE_READY) + { + if((pData == NULL) || (Size == 0)) + { + return HAL_ERROR; + } + + /* Wait until BUSY flag is reset */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Disable Pos */ + hi2c->Instance->CR1 &= ~I2C_CR1_POS; + + hi2c->State = HAL_I2C_STATE_MEM_BUSY_TX; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + hi2c->pBuffPtr = pData; + hi2c->XferSize = Size; + hi2c->XferCount = Size; + + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmatx->XferCpltCallback = I2C_DMAMemTransmitCplt; + + /* Set the DMA error callback */ + hi2c->hdmatx->XferErrorCallback = I2C_DMAError; + + /* Enable the DMA Stream */ + HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->DR, Size); + + /* Send Slave Address and Memory Address */ + if(I2C_RequestMemoryWrite(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG) != HAL_OK) + { + if(hi2c->ErrorCode == HAL_I2C_ERROR_AF) + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_ERROR; + } + else + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_TIMEOUT; + } + } + + /* Enable DMA Request */ + hi2c->Instance->CR2 |= I2C_CR2_DMAEN; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Reads an amount of data in no-blocking mode with DMA from a specific memory address. + * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @param DevAddress: Target device address + * @param MemAddress: Internal memory address + * @param MemAddSize: Size of internal memory address + * @param pData: Pointer to data buffer + * @param Size: Amount of data to be read + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size) +{ + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if(hi2c->State == HAL_I2C_STATE_READY) + { + if((pData == NULL) || (Size == 0)) + { + return HAL_ERROR; + } + + /* Wait until BUSY flag is reset */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Disable Pos */ + hi2c->Instance->CR1 &= ~I2C_CR1_POS; + + hi2c->State = HAL_I2C_STATE_MEM_BUSY_RX; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + hi2c->pBuffPtr = pData; + hi2c->XferSize = Size; + hi2c->XferCount = Size; + + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmarx->XferCpltCallback = I2C_DMAMemReceiveCplt; + + /* Set the DMA error callback */ + hi2c->hdmarx->XferErrorCallback = I2C_DMAError; + + /* Enable the DMA Stream */ + HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->DR, (uint32_t)pData, Size); + + /* Send Slave Address and Memory Address */ + if(I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG) != HAL_OK) + { + if(hi2c->ErrorCode == HAL_I2C_ERROR_AF) + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_ERROR; + } + else + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_TIMEOUT; + } + } + + if(Size == 1) + { + /* Disable Acknowledge */ + hi2c->Instance->CR1 &= ~I2C_CR1_ACK; + } + else + { + /* Enable Last DMA bit */ + hi2c->Instance->CR2 |= I2C_CR2_LAST; + } + + /* Enable DMA Request */ + hi2c->Instance->CR2 |= I2C_CR2_DMAEN; + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Checks if target device is ready for communication. + * @note This function is used with Memory devices + * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @param DevAddress: Target device address + * @param Trials: Number of trials + * @param Timeout: Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout) +{ + uint32_t tickstart = 0, tmp1 = 0, tmp2 = 0, tmp3 = 0, I2C_Trials = 1; + + if(hi2c->State == HAL_I2C_STATE_READY) + { + /* Wait until BUSY flag is reset */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Disable Pos */ + hi2c->Instance->CR1 &= ~I2C_CR1_POS; + + hi2c->State = HAL_I2C_STATE_BUSY; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + do + { + /* Generate Start */ + hi2c->Instance->CR1 |= I2C_CR1_START; + + /* Wait until SB flag is set */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_SB, RESET, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* Send slave address */ + hi2c->Instance->DR = I2C_7BIT_ADD_WRITE(DevAddress); + + /* Wait until ADDR or AF flag are set */ + /* Get tick */ + tickstart = HAL_GetTick(); + + tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ADDR); + tmp2 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF); + tmp3 = hi2c->State; + while((tmp1 == RESET) && (tmp2 == RESET) && (tmp3 != HAL_I2C_STATE_TIMEOUT)) + { + if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout)) + { + hi2c->State = HAL_I2C_STATE_TIMEOUT; + } + tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ADDR); + tmp2 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF); + tmp3 = hi2c->State; + } + + hi2c->State = HAL_I2C_STATE_READY; + + /* Check if the ADDR flag has been set */ + if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ADDR) == SET) + { + /* Generate Stop */ + hi2c->Instance->CR1 |= I2C_CR1_STOP; + + /* Clear ADDR Flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + + /* Wait until BUSY flag is reset */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK) + { + return HAL_TIMEOUT; + } + + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + /* Generate Stop */ + hi2c->Instance->CR1 |= I2C_CR1_STOP; + + /* Clear AF Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Wait until BUSY flag is reset */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK) + { + return HAL_TIMEOUT; + } + + } + }while(I2C_Trials++ < Trials); + + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief This function handles I2C event interrupt request. + * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @retval HAL status + */ +void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c) +{ + uint32_t tmp1 = 0, tmp2 = 0, tmp3 = 0, tmp4 = 0; + /* Master mode selected */ + if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_MSL) == SET) + { + /* I2C in mode Transmitter -----------------------------------------------*/ + if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TRA) == SET) + { + tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXE); + tmp2 = __HAL_I2C_GET_IT_SOURCE(hi2c, I2C_IT_BUF); + tmp3 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BTF); + tmp4 = __HAL_I2C_GET_IT_SOURCE(hi2c, I2C_IT_EVT); + /* TXE set and BTF reset -----------------------------------------------*/ + if((tmp1 == SET) && (tmp2 == SET) && (tmp3 == RESET)) + { + I2C_MasterTransmit_TXE(hi2c); + } + /* BTF set -------------------------------------------------------------*/ + else if((tmp3 == SET) && (tmp4 == SET)) + { + I2C_MasterTransmit_BTF(hi2c); + } + } + /* I2C in mode Receiver --------------------------------------------------*/ + else + { + tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE); + tmp2 = __HAL_I2C_GET_IT_SOURCE(hi2c, I2C_IT_BUF); + tmp3 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BTF); + tmp4 = __HAL_I2C_GET_IT_SOURCE(hi2c, I2C_IT_EVT); + /* RXNE set and BTF reset -----------------------------------------------*/ + if((tmp1 == SET) && (tmp2 == SET) && (tmp3 == RESET)) + { + I2C_MasterReceive_RXNE(hi2c); + } + /* BTF set -------------------------------------------------------------*/ + else if((tmp3 == SET) && (tmp4 == SET)) + { + I2C_MasterReceive_BTF(hi2c); + } + } + } + /* Slave mode selected */ + else + { + tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ADDR); + tmp2 = __HAL_I2C_GET_IT_SOURCE(hi2c, (I2C_IT_EVT)); + tmp3 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF); + tmp4 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TRA); + /* ADDR set --------------------------------------------------------------*/ + if((tmp1 == SET) && (tmp2 == SET)) + { + I2C_Slave_ADDR(hi2c); + } + /* STOPF set --------------------------------------------------------------*/ + else if((tmp3 == SET) && (tmp2 == SET)) + { + I2C_Slave_STOPF(hi2c); + } + /* I2C in mode Transmitter -----------------------------------------------*/ + else if(tmp4 == SET) + { + tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXE); + tmp2 = __HAL_I2C_GET_IT_SOURCE(hi2c, I2C_IT_BUF); + tmp3 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BTF); + tmp4 = __HAL_I2C_GET_IT_SOURCE(hi2c, I2C_IT_EVT); + /* TXE set and BTF reset -----------------------------------------------*/ + if((tmp1 == SET) && (tmp2 == SET) && (tmp3 == RESET)) + { + I2C_SlaveTransmit_TXE(hi2c); + } + /* BTF set -------------------------------------------------------------*/ + else if((tmp3 == SET) && (tmp4 == SET)) + { + I2C_SlaveTransmit_BTF(hi2c); + } + } + /* I2C in mode Receiver --------------------------------------------------*/ + else + { + tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE); + tmp2 = __HAL_I2C_GET_IT_SOURCE(hi2c, I2C_IT_BUF); + tmp3 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BTF); + tmp4 = __HAL_I2C_GET_IT_SOURCE(hi2c, I2C_IT_EVT); + /* RXNE set and BTF reset ----------------------------------------------*/ + if((tmp1 == SET) && (tmp2 == SET) && (tmp3 == RESET)) + { + I2C_SlaveReceive_RXNE(hi2c); + } + /* BTF set -------------------------------------------------------------*/ + else if((tmp3 == SET) && (tmp4 == SET)) + { + I2C_SlaveReceive_BTF(hi2c); + } + } + } +} + +/** + * @brief This function handles I2C error interrupt request. + * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @retval HAL status + */ +void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c) +{ + uint32_t tmp1 = 0, tmp2 = 0, tmp3 = 0; + + tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BERR); + tmp2 = __HAL_I2C_GET_IT_SOURCE(hi2c, I2C_IT_ERR); + /* I2C Bus error interrupt occurred ----------------------------------------*/ + if((tmp1 == SET) && (tmp2 == SET)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_BERR; + + /* Clear BERR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_BERR); + } + + tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ARLO); + tmp2 = __HAL_I2C_GET_IT_SOURCE(hi2c, I2C_IT_ERR); + /* I2C Arbitration Loss error interrupt occurred ---------------------------*/ + if((tmp1 == SET) && (tmp2 == SET)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_ARLO; + + /* Clear ARLO flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ARLO); + } + + tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF); + tmp2 = __HAL_I2C_GET_IT_SOURCE(hi2c, I2C_IT_ERR); + /* I2C Acknowledge failure error interrupt occurred ------------------------*/ + if((tmp1 == SET) && (tmp2 == SET)) + { + tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_MSL); + tmp2 = hi2c->XferCount; + tmp3 = hi2c->State; + if((tmp1 == RESET) && (tmp2 == 0) && (tmp3 == HAL_I2C_STATE_BUSY_TX)) + { + I2C_Slave_AF(hi2c); + } + else + { + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + /* Clear AF flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + } + } + + tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_OVR); + tmp2 = __HAL_I2C_GET_IT_SOURCE(hi2c, I2C_IT_ERR); + /* I2C Over-Run/Under-Run interrupt occurred -------------------------------*/ + if((tmp1 == SET) && (tmp2 == SET)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_OVR; + /* Clear OVR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_OVR); + } + + if(hi2c->ErrorCode != HAL_I2C_ERROR_NONE) + { + hi2c->State = HAL_I2C_STATE_READY; + + /* Disable Pos bit in I2C CR1 when error occurred in Master/Mem Receive IT Process */ + hi2c->Instance->CR1 &= ~I2C_CR1_POS; + + HAL_I2C_ErrorCallback(hi2c); + } +} + +/** + * @brief Master Tx Transfer completed callbacks. + * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @retval None + */ + __weak void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_I2C_TxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Master Rx Transfer completed callbacks. + * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @retval None + */ +__weak void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_I2C_TxCpltCallback could be implemented in the user file + */ +} + +/** @brief Slave Tx Transfer completed callbacks. + * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @retval None + */ + __weak void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_I2C_TxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Slave Rx Transfer completed callbacks. + * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @retval None + */ +__weak void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_I2C_TxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Memory Tx Transfer completed callbacks. + * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @retval None + */ + __weak void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_I2C_TxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Memory Rx Transfer completed callbacks. + * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @retval None + */ +__weak void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_I2C_TxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief I2C error callbacks. + * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @retval None + */ + __weak void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c) +{ + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_I2C_ErrorCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup I2C_Exported_Functions_Group3 Peripheral State and Errors functions + * @brief Peripheral State and Errors functions + * +@verbatim + =============================================================================== + ##### Peripheral State and Errors functions ##### + =============================================================================== + [..] + This subsection permits to get in run-time the status of the peripheral + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Returns the I2C state. + * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @retval HAL state + */ +HAL_I2C_StateTypeDef HAL_I2C_GetState(I2C_HandleTypeDef *hi2c) +{ + return hi2c->State; +} + +/** + * @brief Return the I2C error code + * @param hi2c : pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. +* @retval I2C Error Code +*/ +uint32_t HAL_I2C_GetError(I2C_HandleTypeDef *hi2c) +{ + return hi2c->ErrorCode; +} + +/** + * @} + */ + +/** + * @brief Handle TXE flag for Master + * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_MasterTransmit_TXE(I2C_HandleTypeDef *hi2c) +{ + /* Write data to DR */ + hi2c->Instance->DR = (*hi2c->pBuffPtr++); + hi2c->XferCount--; + + if(hi2c->XferCount == 0) + { + /* Disable BUF interrupt */ + __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_BUF); + } + + return HAL_OK; +} + +/** + * @brief Handle BTF flag for Master transmitter + * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_MasterTransmit_BTF(I2C_HandleTypeDef *hi2c) +{ + if(hi2c->XferCount != 0) + { + /* Write data to DR */ + hi2c->Instance->DR = (*hi2c->pBuffPtr++); + hi2c->XferCount--; + } + else + { + /* Disable EVT, BUF and ERR interrupt */ + __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); + + /* Generate Stop */ + hi2c->Instance->CR1 |= I2C_CR1_STOP; + + if(hi2c->State == HAL_I2C_STATE_MEM_BUSY_TX) + { + hi2c->State = HAL_I2C_STATE_READY; + + HAL_I2C_MemTxCpltCallback(hi2c); + } + else + { + hi2c->State = HAL_I2C_STATE_READY; + + HAL_I2C_MasterTxCpltCallback(hi2c); + } + } + return HAL_OK; +} + +/** + * @brief Handle RXNE flag for Master + * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_MasterReceive_RXNE(I2C_HandleTypeDef *hi2c) +{ + uint32_t tmp = 0; + + tmp = hi2c->XferCount; + if(tmp > 3) + { + /* Read data from DR */ + (*hi2c->pBuffPtr++) = hi2c->Instance->DR; + hi2c->XferCount--; + } + else if((tmp == 2) || (tmp == 3)) + { + /* Disable BUF interrupt */ + __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_BUF); + } + else + { + /* Disable EVT, BUF and ERR interrupt */ + __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); + + /* Read data from DR */ + (*hi2c->pBuffPtr++) = hi2c->Instance->DR; + hi2c->XferCount--; + + if(hi2c->State == HAL_I2C_STATE_MEM_BUSY_RX) + { + hi2c->State = HAL_I2C_STATE_READY; + + HAL_I2C_MemRxCpltCallback(hi2c); + } + else + { + hi2c->State = HAL_I2C_STATE_READY; + + HAL_I2C_MasterRxCpltCallback(hi2c); + } + } + return HAL_OK; +} + +/** + * @brief Handle BTF flag for Master receiver + * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_MasterReceive_BTF(I2C_HandleTypeDef *hi2c) +{ + if(hi2c->XferCount == 3) + { + /* Disable Acknowledge */ + hi2c->Instance->CR1 &= ~I2C_CR1_ACK; + + /* Read data from DR */ + (*hi2c->pBuffPtr++) = hi2c->Instance->DR; + hi2c->XferCount--; + } + else if(hi2c->XferCount == 2) + { + /* Generate Stop */ + hi2c->Instance->CR1 |= I2C_CR1_STOP; + + /* Read data from DR */ + (*hi2c->pBuffPtr++) = hi2c->Instance->DR; + hi2c->XferCount--; + + /* Read data from DR */ + (*hi2c->pBuffPtr++) = hi2c->Instance->DR; + hi2c->XferCount--; + + /* Disable EVT and ERR interrupt */ + __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_ERR); + + if(hi2c->State == HAL_I2C_STATE_MEM_BUSY_RX) + { + hi2c->State = HAL_I2C_STATE_READY; + + HAL_I2C_MemRxCpltCallback(hi2c); + } + else + { + hi2c->State = HAL_I2C_STATE_READY; + + HAL_I2C_MasterRxCpltCallback(hi2c); + } + } + else + { + /* Read data from DR */ + (*hi2c->pBuffPtr++) = hi2c->Instance->DR; + hi2c->XferCount--; + } + return HAL_OK; +} + +/** + * @brief Handle TXE flag for Slave + * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_SlaveTransmit_TXE(I2C_HandleTypeDef *hi2c) +{ + if(hi2c->XferCount != 0) + { + /* Write data to DR */ + hi2c->Instance->DR = (*hi2c->pBuffPtr++); + hi2c->XferCount--; + } + return HAL_OK; +} + +/** + * @brief Handle BTF flag for Slave transmitter + * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_SlaveTransmit_BTF(I2C_HandleTypeDef *hi2c) +{ + if(hi2c->XferCount != 0) + { + /* Write data to DR */ + hi2c->Instance->DR = (*hi2c->pBuffPtr++); + hi2c->XferCount--; + } + return HAL_OK; +} + +/** + * @brief Handle RXNE flag for Slave + * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_SlaveReceive_RXNE(I2C_HandleTypeDef *hi2c) +{ + if(hi2c->XferCount != 0) + { + /* Read data from DR */ + (*hi2c->pBuffPtr++) = hi2c->Instance->DR; + hi2c->XferCount--; + } + return HAL_OK; +} + +/** + * @brief Handle BTF flag for Slave receiver + * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_SlaveReceive_BTF(I2C_HandleTypeDef *hi2c) +{ + if(hi2c->XferCount != 0) + { + /* Read data from DR */ + (*hi2c->pBuffPtr++) = hi2c->Instance->DR; + hi2c->XferCount--; + } + return HAL_OK; +} + +/** + * @brief Handle ADD flag for Slave + * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_Slave_ADDR(I2C_HandleTypeDef *hi2c) +{ + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + + return HAL_OK; +} + +/** + * @brief Handle STOPF flag for Slave + * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_Slave_STOPF(I2C_HandleTypeDef *hi2c) +{ + /* Disable EVT, BUF and ERR interrupt */ + __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); + + /* Clear STOPF flag */ + __HAL_I2C_CLEAR_STOPFLAG(hi2c); + + /* Disable Acknowledge */ + hi2c->Instance->CR1 &= ~I2C_CR1_ACK; + + hi2c->State = HAL_I2C_STATE_READY; + + HAL_I2C_SlaveRxCpltCallback(hi2c); + + return HAL_OK; +} + +/** + * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_Slave_AF(I2C_HandleTypeDef *hi2c) +{ + /* Disable EVT, BUF and ERR interrupt */ + __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); + + /* Clear AF flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Disable Acknowledge */ + hi2c->Instance->CR1 &= ~I2C_CR1_ACK; + + hi2c->State = HAL_I2C_STATE_READY; + + HAL_I2C_SlaveTxCpltCallback(hi2c); + + return HAL_OK; +} + +/** + * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @param DevAddress: Target device address + * @param Timeout: Timeout duration + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_MasterRequestWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Timeout) +{ + /* Generate Start */ + hi2c->Instance->CR1 |= I2C_CR1_START; + + /* Wait until SB flag is set */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_SB, RESET, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + if(hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_7BIT) + { + /* Send slave address */ + hi2c->Instance->DR = I2C_7BIT_ADD_WRITE(DevAddress); + } + else + { + /* Send header of slave address */ + hi2c->Instance->DR = I2C_10BIT_HEADER_WRITE(DevAddress); + + /* Wait until ADD10 flag is set */ + if(I2C_WaitOnMasterAddressFlagUntilTimeout(hi2c, I2C_FLAG_ADD10, Timeout) != HAL_OK) + { + if(hi2c->ErrorCode == HAL_I2C_ERROR_AF) + { + return HAL_ERROR; + } + else + { + return HAL_TIMEOUT; + } + } + + /* Send slave address */ + hi2c->Instance->DR = I2C_10BIT_ADDRESS(DevAddress); + } + + /* Wait until ADDR flag is set */ + if(I2C_WaitOnMasterAddressFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, Timeout) != HAL_OK) + { + if(hi2c->ErrorCode == HAL_I2C_ERROR_AF) + { + return HAL_ERROR; + } + else + { + return HAL_TIMEOUT; + } + } + + return HAL_OK; +} + +/** + * @brief Master sends target device address for read request. + * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @param DevAddress: Target device address + * @param Timeout: Timeout duration + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_MasterRequestRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Timeout) +{ + /* Enable Acknowledge */ + hi2c->Instance->CR1 |= I2C_CR1_ACK; + + /* Generate Start */ + hi2c->Instance->CR1 |= I2C_CR1_START; + + /* Wait until SB flag is set */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_SB, RESET, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + if(hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_7BIT) + { + /* Send slave address */ + hi2c->Instance->DR = I2C_7BIT_ADD_READ(DevAddress); + } + else + { + /* Send header of slave address */ + hi2c->Instance->DR = I2C_10BIT_HEADER_WRITE(DevAddress); + + /* Wait until ADD10 flag is set */ + if(I2C_WaitOnMasterAddressFlagUntilTimeout(hi2c, I2C_FLAG_ADD10, Timeout) != HAL_OK) + { + if(hi2c->ErrorCode == HAL_I2C_ERROR_AF) + { + return HAL_ERROR; + } + else + { + return HAL_TIMEOUT; + } + } + + /* Send slave address */ + hi2c->Instance->DR = I2C_10BIT_ADDRESS(DevAddress); + + /* Wait until ADDR flag is set */ + if(I2C_WaitOnMasterAddressFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, Timeout) != HAL_OK) + { + if(hi2c->ErrorCode == HAL_I2C_ERROR_AF) + { + return HAL_ERROR; + } + else + { + return HAL_TIMEOUT; + } + } + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + + /* Generate Restart */ + hi2c->Instance->CR1 |= I2C_CR1_START; + + /* Wait until SB flag is set */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_SB, RESET, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* Send header of slave address */ + hi2c->Instance->DR = I2C_10BIT_HEADER_READ(DevAddress); + } + + /* Wait until ADDR flag is set */ + if(I2C_WaitOnMasterAddressFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, Timeout) != HAL_OK) + { + if(hi2c->ErrorCode == HAL_I2C_ERROR_AF) + { + return HAL_ERROR; + } + else + { + return HAL_TIMEOUT; + } + } + + return HAL_OK; +} + +/** + * @brief Master sends target device address followed by internal memory address for write request. + * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @param DevAddress: Target device address + * @param MemAddress: Internal memory address + * @param MemAddSize: Size of internal memory address + * @param Timeout: Timeout duration + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_RequestMemoryWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout) +{ + /* Generate Start */ + hi2c->Instance->CR1 |= I2C_CR1_START; + + /* Wait until SB flag is set */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_SB, RESET, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* Send slave address */ + hi2c->Instance->DR = I2C_7BIT_ADD_WRITE(DevAddress); + + /* Wait until ADDR flag is set */ + if(I2C_WaitOnMasterAddressFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, Timeout) != HAL_OK) + { + if(hi2c->ErrorCode == HAL_I2C_ERROR_AF) + { + return HAL_ERROR; + } + else + { + return HAL_TIMEOUT; + } + } + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + + /* Wait until TXE flag is set */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TXE, RESET, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* If Memory address size is 8Bit */ + if(MemAddSize == I2C_MEMADD_SIZE_8BIT) + { + /* Send Memory Address */ + hi2c->Instance->DR = I2C_MEM_ADD_LSB(MemAddress); + } + /* If Memory address size is 16Bit */ + else + { + /* Send MSB of Memory Address */ + hi2c->Instance->DR = I2C_MEM_ADD_MSB(MemAddress); + + /* Wait until TXE flag is set */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TXE, RESET, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* Send LSB of Memory Address */ + hi2c->Instance->DR = I2C_MEM_ADD_LSB(MemAddress); + } + + return HAL_OK; +} + +/** + * @brief Master sends target device address followed by internal memory address for read request. + * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @param DevAddress: Target device address + * @param MemAddress: Internal memory address + * @param MemAddSize: Size of internal memory address + * @param Timeout: Timeout duration + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_RequestMemoryRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout) +{ + /* Enable Acknowledge */ + hi2c->Instance->CR1 |= I2C_CR1_ACK; + + /* Generate Start */ + hi2c->Instance->CR1 |= I2C_CR1_START; + + /* Wait until SB flag is set */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_SB, RESET, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* Send slave address */ + hi2c->Instance->DR = I2C_7BIT_ADD_WRITE(DevAddress); + + /* Wait until ADDR flag is set */ + if(I2C_WaitOnMasterAddressFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, Timeout) != HAL_OK) + { + if(hi2c->ErrorCode == HAL_I2C_ERROR_AF) + { + return HAL_ERROR; + } + else + { + return HAL_TIMEOUT; + } + } + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + + /* Wait until TXE flag is set */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TXE, RESET, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* If Memory address size is 8Bit */ + if(MemAddSize == I2C_MEMADD_SIZE_8BIT) + { + /* Send Memory Address */ + hi2c->Instance->DR = I2C_MEM_ADD_LSB(MemAddress); + } + /* If Memory address size is 16Bit */ + else + { + /* Send MSB of Memory Address */ + hi2c->Instance->DR = I2C_MEM_ADD_MSB(MemAddress); + + /* Wait until TXE flag is set */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TXE, RESET, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* Send LSB of Memory Address */ + hi2c->Instance->DR = I2C_MEM_ADD_LSB(MemAddress); + } + + /* Wait until TXE flag is set */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TXE, RESET, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* Generate Restart */ + hi2c->Instance->CR1 |= I2C_CR1_START; + + /* Wait until SB flag is set */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_SB, RESET, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* Send slave address */ + hi2c->Instance->DR = I2C_7BIT_ADD_READ(DevAddress); + + /* Wait until ADDR flag is set */ + if(I2C_WaitOnMasterAddressFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, Timeout) != HAL_OK) + { + if(hi2c->ErrorCode == HAL_I2C_ERROR_AF) + { + return HAL_ERROR; + } + else + { + return HAL_TIMEOUT; + } + } + + return HAL_OK; +} + +/** + * @brief DMA I2C master transmit process complete callback. + * @param hdma: DMA handle + * @retval None + */ +static void I2C_DMAMasterTransmitCplt(DMA_HandleTypeDef *hdma) +{ + I2C_HandleTypeDef* hi2c = (I2C_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent; + + /* Wait until BTF flag is reset */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BTF, RESET, I2C_TIMEOUT_FLAG) != HAL_OK) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + } + + /* Generate Stop */ + hi2c->Instance->CR1 |= I2C_CR1_STOP; + + /* Disable DMA Request */ + hi2c->Instance->CR2 &= ~I2C_CR2_DMAEN; + + hi2c->XferCount = 0; + + hi2c->State = HAL_I2C_STATE_READY; + + /* Check if Errors has been detected during transfer */ + if(hi2c->ErrorCode != HAL_I2C_ERROR_NONE) + { + HAL_I2C_ErrorCallback(hi2c); + } + else + { + HAL_I2C_MasterTxCpltCallback(hi2c); + } +} + +/** + * @brief DMA I2C slave transmit process complete callback. + * @param hdma: DMA handle + * @retval None + */ +static void I2C_DMASlaveTransmitCplt(DMA_HandleTypeDef *hdma) +{ + I2C_HandleTypeDef* hi2c = (I2C_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent; + + /* Wait until AF flag is reset */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_AF, RESET, I2C_TIMEOUT_FLAG) != HAL_OK) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + } + + /* Clear AF flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Disable Address Acknowledge */ + hi2c->Instance->CR1 &= ~I2C_CR1_ACK; + + /* Disable DMA Request */ + hi2c->Instance->CR2 &= ~I2C_CR2_DMAEN; + + hi2c->XferCount = 0; + + hi2c->State = HAL_I2C_STATE_READY; + + /* Check if Errors has been detected during transfer */ + if(hi2c->ErrorCode != HAL_I2C_ERROR_NONE) + { + HAL_I2C_ErrorCallback(hi2c); + } + else + { + HAL_I2C_SlaveTxCpltCallback(hi2c); + } +} + +/** + * @brief DMA I2C master receive process complete callback + * @param hdma: DMA handle + * @retval None + */ +static void I2C_DMAMasterReceiveCplt(DMA_HandleTypeDef *hdma) +{ + I2C_HandleTypeDef* hi2c = (I2C_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent; + + /* Disable Acknowledge */ + hi2c->Instance->CR1 &= ~I2C_CR1_ACK; + + /* Generate Stop */ + hi2c->Instance->CR1 |= I2C_CR1_STOP; + + /* Disable Last DMA */ + hi2c->Instance->CR2 &= ~I2C_CR2_LAST; + + /* Disable DMA Request */ + hi2c->Instance->CR2 &= ~I2C_CR2_DMAEN; + + hi2c->XferCount = 0; + + hi2c->State = HAL_I2C_STATE_READY; + + /* Check if Errors has been detected during transfer */ + if(hi2c->ErrorCode != HAL_I2C_ERROR_NONE) + { + HAL_I2C_ErrorCallback(hi2c); + } + else + { + HAL_I2C_MasterRxCpltCallback(hi2c); + } +} + +/** + * @brief DMA I2C slave receive process complete callback. + * @param hdma: DMA handle + * @retval None + */ +static void I2C_DMASlaveReceiveCplt(DMA_HandleTypeDef *hdma) +{ + I2C_HandleTypeDef* hi2c = (I2C_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent; + + /* Wait until STOPF flag is reset */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_STOPF, RESET, I2C_TIMEOUT_FLAG) != HAL_OK) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + } + + /* Clear STOPF flag */ + __HAL_I2C_CLEAR_STOPFLAG(hi2c); + + /* Disable Address Acknowledge */ + hi2c->Instance->CR1 &= ~I2C_CR1_ACK; + + /* Disable DMA Request */ + hi2c->Instance->CR2 &= ~I2C_CR2_DMAEN; + + hi2c->XferCount = 0; + + hi2c->State = HAL_I2C_STATE_READY; + + /* Check if Errors has been detected during transfer */ + if(hi2c->ErrorCode != HAL_I2C_ERROR_NONE) + { + HAL_I2C_ErrorCallback(hi2c); + } + else + { + HAL_I2C_SlaveRxCpltCallback(hi2c); + } +} + +/** + * @brief DMA I2C Memory Write process complete callback + * @param hdma: DMA handle + * @retval None + */ +static void I2C_DMAMemTransmitCplt(DMA_HandleTypeDef *hdma) +{ + I2C_HandleTypeDef* hi2c = (I2C_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent; + + /* Wait until BTF flag is reset */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BTF, RESET, I2C_TIMEOUT_FLAG) != HAL_OK) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + } + + /* Generate Stop */ + hi2c->Instance->CR1 |= I2C_CR1_STOP; + + /* Disable DMA Request */ + hi2c->Instance->CR2 &= ~I2C_CR2_DMAEN; + + hi2c->XferCount = 0; + + hi2c->State = HAL_I2C_STATE_READY; + + /* Check if Errors has been detected during transfer */ + if(hi2c->ErrorCode != HAL_I2C_ERROR_NONE) + { + HAL_I2C_ErrorCallback(hi2c); + } + else + { + HAL_I2C_MemTxCpltCallback(hi2c); + } +} + +/** + * @brief DMA I2C Memory Read process complete callback + * @param hdma: DMA handle + * @retval None + */ +static void I2C_DMAMemReceiveCplt(DMA_HandleTypeDef *hdma) +{ + I2C_HandleTypeDef* hi2c = (I2C_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent; + + /* Disable Acknowledge */ + hi2c->Instance->CR1 &= ~I2C_CR1_ACK; + + /* Generate Stop */ + hi2c->Instance->CR1 |= I2C_CR1_STOP; + + /* Disable Last DMA */ + hi2c->Instance->CR2 &= ~I2C_CR2_LAST; + + /* Disable DMA Request */ + hi2c->Instance->CR2 &= ~I2C_CR2_DMAEN; + + hi2c->XferCount = 0; + + hi2c->State = HAL_I2C_STATE_READY; + + /* Check if Errors has been detected during transfer */ + if(hi2c->ErrorCode != HAL_I2C_ERROR_NONE) + { + HAL_I2C_ErrorCallback(hi2c); + } + else + { + HAL_I2C_MemRxCpltCallback(hi2c); + } +} + +/** + * @brief DMA I2C communication error callback. + * @param hdma: DMA handle + * @retval None + */ +static void I2C_DMAError(DMA_HandleTypeDef *hdma) +{ + I2C_HandleTypeDef* hi2c = (I2C_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent; + + /* Disable Acknowledge */ + hi2c->Instance->CR1 &= ~I2C_CR1_ACK; + + hi2c->XferCount = 0; + + hi2c->State = HAL_I2C_STATE_READY; + + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + HAL_I2C_ErrorCallback(hi2c); +} + +/** + * @brief This function handles I2C Communication Timeout. + * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @param Flag: specifies the I2C flag to check. + * @param Status: The new Flag status (SET or RESET). + * @param Timeout: Timeout duration + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_WaitOnFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, FlagStatus Status, uint32_t Timeout) +{ + uint32_t tickstart = 0; + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait until flag is set */ + if(Status == RESET) + { + while(__HAL_I2C_GET_FLAG(hi2c, Flag) == RESET) + { + /* Check for the Timeout */ + if(Timeout != HAL_MAX_DELAY) + { + if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout)) + { + hi2c->State= HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_TIMEOUT; + } + } + } + } + else + { + while(__HAL_I2C_GET_FLAG(hi2c, Flag) != RESET) + { + /* Check for the Timeout */ + if(Timeout != HAL_MAX_DELAY) + { + if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout)) + { + hi2c->State= HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_TIMEOUT; + } + } + } + } + return HAL_OK; +} + +/** + * @brief This function handles I2C Communication Timeout for Master addressing phase. + * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @param Flag: specifies the I2C flag to check. + * @param Timeout: Timeout duration + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_WaitOnMasterAddressFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, uint32_t Timeout) +{ + uint32_t tickstart = 0; + + /* Get tick */ + tickstart = HAL_GetTick(); + + while(__HAL_I2C_GET_FLAG(hi2c, Flag) == RESET) + { + if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == SET) + { + /* Generate Stop */ + hi2c->Instance->CR1 |= I2C_CR1_STOP; + + /* Clear AF Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + hi2c->ErrorCode = HAL_I2C_ERROR_AF; + hi2c->State= HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + /* Check for the Timeout */ + if(Timeout != HAL_MAX_DELAY) + { + if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout)) + { + hi2c->State= HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_TIMEOUT; + } + } + } + return HAL_OK; +} + +/** + * @} + */ + +#endif /* HAL_I2C_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |