diff options
Diffstat (limited to 'c/src/lib/libbsp/arm/shared/comm/uart.h')
| -rw-r--r-- | c/src/lib/libbsp/arm/shared/comm/uart.h | 158 |
1 files changed, 158 insertions, 0 deletions
diff --git a/c/src/lib/libbsp/arm/shared/comm/uart.h b/c/src/lib/libbsp/arm/shared/comm/uart.h new file mode 100644 index 0000000000..d517109392 --- /dev/null +++ b/c/src/lib/libbsp/arm/shared/comm/uart.h @@ -0,0 +1,158 @@ + + +/* + * This software is Copyright (C) 1998 by T.sqware - all rights limited + * It is provided in to the public domain "as is", can be freely modified + * as far as this copyight notice is kept unchanged, but does not imply + * an endorsement by T.sqware of the product in which it is included. + * + * Copyright (c) Canon Research France SA.] + * Emmanuel Raguet, mailto:raguet@crf.canon.fr + * + * The license and distribution terms for this file may be + * found in found in the file LICENSE in this distribution or at + * http://www.OARcorp.com/rtems/license.html. + */ + +#ifndef _BSPUART_H +#define _BSPUART_H + +void BSP_uart_init(int uart, int baud, int hwFlow); +void BSP_uart_set_baud(int aurt, int baud); +void BSP_uart_intr_ctrl(int uart, int cmd); +void BSP_uart_throttle(int uart); +void BSP_uart_unthrottle(int uart); +int BSP_uart_polled_status(int uart); +void BSP_uart_polled_write(int uart, int val); +int BSP_uart_polled_read(int uart); +void BSP_uart_termios_set(int uart, void *ttyp); +int BSP_uart_termios_write_com1(int minor, const char *buf, int len); +int BSP_uart_termios_write_com2(int minor, const char *buf, int len); +void BSP_uart_termios_isr_com1(); +void BSP_uart_termios_isr_com2(); +void BSP_uart_dbgisr_com1(void); +void BSP_uart_dbgisr_com2(void); +extern unsigned BSP_poll_char_via_serial(void); +extern void BSP_output_char_via_serial(int val); +extern int BSPConsolePort; +extern int BSPBaseBaud; +/* + * Command values for BSP_uart_intr_ctrl(), + * values are strange in order to catch errors + * with assert + */ +#define BSP_UART_INTR_CTRL_DISABLE (0) +#define BSP_UART_INTR_CTRL_GDB (0xaa) /* RX only */ +#define BSP_UART_INTR_CTRL_ENABLE (0xbb) /* Normal operations */ +#define BSP_UART_INTR_CTRL_TERMIOS (0xcc) /* RX & line status */ + +/* Return values for uart_polled_status() */ +#define BSP_UART_STATUS_ERROR (-1) /* No character */ +#define BSP_UART_STATUS_NOCHAR (0) /* No character */ +#define BSP_UART_STATUS_CHAR (1) /* Character present */ +#define BSP_UART_STATUS_BREAK (2) /* Break point is detected */ + +/* PC UART definitions */ +#define BSP_UART_COM1 (0) +#define BSP_UART_COM2 (1) + +/* + * Base IO for UART + */ + +#define COM1_BASE_IO 0x3F8 +#define COM2_BASE_IO 0x2F8 + +/* + * Offsets from base + */ + +/* DLAB 0 */ +#define RBR RSRBR /* Rx Buffer Register (read) */ +#define THR RSTHR /* Tx Buffer Register (write) */ +#define IER RSIER /* Interrupt Enable Register */ + +/* DLAB X */ +#define IIR RSIIR /* Interrupt Ident Register (read) */ +#define FCR RSFCR /* FIFO Control Register (write) */ +#define LCR RSLCR /* Line Control Register */ +#define LSR RSLSR /* Line Status Register */ + +/* DLAB 1 */ +#define DLL RSDLL /* Divisor Latch, LSB */ +#define DLM RSDLH /* Divisor Latch, MSB */ + +/* Uart control */ +#define CNT RSCNT /* General Control register */ + +/* + * define bit for CNT + */ +#define UART_ENABLE 1 +#define PAD_ENABLE 2 + +/* + * Interrupt source definition via IIR + */ +#define NO_MORE_INTR 1 +#define TRANSMITTER_HODING_REGISTER_EMPTY 2 +#define RECEIVER_DATA_AVAIL 4 +#define RECEIVER_ERROR 6 +#define CHARACTER_TIMEOUT_INDICATION 12 + +/* + * Bits definition of IER + */ +#define RECEIVE_ENABLE 0x1 +#define TRANSMIT_ENABLE 0x2 +#define RECEIVER_LINE_ST_ENABLE 0x4 +#define INTERRUPT_DISABLE 0x0 + +/* + * Bits definition of the Line Status Register (LSR) + */ +#define DR 0x01 /* Data Ready */ +#define OE 0x02 /* Overrun Error */ +#define PE 0x04 /* Parity Error */ +#define FE 0x08 /* Framing Error */ +#define BI 0x10 /* Break Interrupt */ +#define THRE 0x20 /* Transmitter Holding Register Empty */ +#define TEMT 0x40 /* Transmitter Empty */ +#define ERFIFO 0x80 /* Error receive Fifo */ + +/* + * Bits definition of the Line Control Register (LCR) + */ +#define CHR_5_BITS 0 +#define CHR_6_BITS 1 +#define CHR_7_BITS 2 +#define CHR_8_BITS 3 + +#define WL 0x03 /* Word length mask */ +#define STB 0x04 /* 1 Stop Bit, otherwise 2 Stop Bits */ +#define PEN 0x08 /* Parity Enabled */ +#define EPS 0x10 /* Even Parity Select, otherwise Odd */ +#define SP 0x20 /* Stick Parity */ +#define BCB 0x40 /* Break Control Bit */ +#define DLAB 0x80 /* Enable Divisor Latch Access */ + +/* + * Bits definition of the FIFO Control Register : WD16C552 or NS16550 + */ + +#define FIFO_CTRL 0x01 /* Set to 1 permit access to other bits */ +#define FIFO_EN 0x01 /* Enable the FIFO */ +#define XMIT_RESET 0x04 /* Transmit FIFO Reset */ +#define RCV_RESET 0x02 /* Receive FIFO Reset */ +#define FCR3 0x08 /* do not understand manual! */ + +#define RECEIVE_FIFO_TRIGGER1 0x0 /* trigger recieve interrupt after 1 byte */ +#define RECEIVE_FIFO_TRIGGER4 0x40 /* trigger recieve interrupt after 4 byte */ +#define RECEIVE_FIFO_TRIGGER8 0x80 /* trigger recieve interrupt after 8 byte */ +#define RECEIVE_FIFO_TRIGGER12 0xc0 /* trigger recieve interrupt after 14 byte */ +#define TRIG_LEVEL 0xc0 /* Mask for the trigger level */ + +#endif /* _BSPUART_H */ + + + |