diff options
Diffstat (limited to 'c/src/lib/libbsp/arm/lm3s69xx/configure.ac')
| -rw-r--r-- | c/src/lib/libbsp/arm/lm3s69xx/configure.ac | 77 |
1 files changed, 0 insertions, 77 deletions
diff --git a/c/src/lib/libbsp/arm/lm3s69xx/configure.ac b/c/src/lib/libbsp/arm/lm3s69xx/configure.ac deleted file mode 100644 index b2158a7e57..0000000000 --- a/c/src/lib/libbsp/arm/lm3s69xx/configure.ac +++ /dev/null @@ -1,77 +0,0 @@ -## -# -# @file -# -# @brief Configure script of LibBSP for the LM3S39XX boards. -# - -AC_PREREQ([2.69]) -AC_INIT([rtems-c-src-lib-libbsp-arm-lm3s69xx],[_RTEMS_VERSION],[https://devel.rtems.org/newticket]) -RTEMS_TOP(../../../../../..) -RTEMS_SOURCE_TOP -RTEMS_BUILD_TOP -RTEMS_BSP_LINKCMDS - -RTEMS_CANONICAL_TARGET_CPU -AM_INIT_AUTOMAKE([no-define nostdinc foreign 1.12.2]) -RTEMS_BSP_CONFIGURE - - - -RTEMS_BSPOPTS_SET([LM3S69XX_SYSTEM_CLOCK],[lm3s*],[50000000U]) -RTEMS_BSPOPTS_SET([LM3S69XX_SYSTEM_CLOCK],[lm4f*],[80000000U]) -RTEMS_BSPOPTS_HELP([LM3S69XX_SYSTEM_CLOCK],[system clock in Hz]) - -RTEMS_BSPOPTS_SET([LM3S69XX_XTAL_CONFIG],[lm3s6965*],[0xE]) dnl 8MHz XTAL -RTEMS_BSPOPTS_SET([LM3S69XX_XTAL_CONFIG],[lm3s3749*],[0x10]) dnl 10MHz XTAL -RTEMS_BSPOPTS_SET([LM3S69XX_XTAL_CONFIG],[lm4f120*],[0x15]) dnl 16MHz XTAL -RTEMS_BSPOPTS_HELP([LM3S69XX_XTAL_CONFIG],[crystal configuration for RCC register]) - -RTEMS_BSPOPTS_SET([LM3S69XX_SSI_CLOCK],[*],[1000000U]) -RTEMS_BSPOPTS_HELP([LM3S69XX_SSI_CLOCK],[SSI clock in Hz]) - -RTEMS_BSPOPTS_SET([LM3S69XX_UART_BAUD],[*],[115200U]) -RTEMS_BSPOPTS_HELP([LM3S69XX_UART_BAUD],[baud for UARTs]) - -RTEMS_BSPOPTS_SET([LM3S69XX_ENABLE_UART_0],[*],[1]) -RTEMS_BSPOPTS_HELP([LM3S69XX_ENABLE_UART_0],[enable UART 0]) - -RTEMS_BSPOPTS_SET([LM3S69XX_ENABLE_UART_1],[*],[]) -RTEMS_BSPOPTS_HELP([LM3S69XX_ENABLE_UART_1],[enable UART 1]) - -RTEMS_BSPOPTS_SET([LM3S69XX_ENABLE_UART_2],[*],[]) -RTEMS_BSPOPTS_HELP([LM3S69XX_ENABLE_UART_2],[enable UART 2]) - -RTEMS_BSPOPTS_SET([LM3S69XX_NUM_GPIO_BLOCKS],[lm3s3749*],[8]) -RTEMS_BSPOPTS_SET([LM3S69XX_NUM_GPIO_BLOCKS],[lm3s6965*],[7]) -RTEMS_BSPOPTS_SET([LM3S69XX_NUM_GPIO_BLOCKS],[lm4f120*],[6]) -RTEMS_BSPOPTS_HELP([LM3S69XX_NUM_GPIO_BLOCKS],[number of GPIO blocks supported by MCU]) - -RTEMS_BSPOPTS_SET([LM3S69XX_NUM_SSI_BLOCKS],[lm3s3749*],[2]) -RTEMS_BSPOPTS_SET([LM3S69XX_NUM_SSI_BLOCKS],[lm3s6965*],[1]) -RTEMS_BSPOPTS_SET([LM3S69XX_NUM_SSI_BLOCKS],[lm4f120*],[4]) -RTEMS_BSPOPTS_HELP([LM3S69XX_NUM_SSI_BLOCKS],[number of SSI blocks supported by MCU]) - -RTEMS_BSPOPTS_SET([LM3S69XX_HAS_UDMA],[lm3s3749*],[1]) -RTEMS_BSPOPTS_SET([LM3S69XX_HAS_UDMA],[lm4f*],[1]) -RTEMS_BSPOPTS_SET([LM3S69XX_HAS_UDMA],[*],[0]) -RTEMS_BSPOPTS_HELP([LM3S69XX_HAS_UDMA],[defined if MCU supports UDMA]) - -RTEMS_BSPOPTS_SET([LM3S69XX_USE_AHB_FOR_GPIO],[lm3s3749*],[1]) -RTEMS_BSPOPTS_SET([LM3S69XX_USE_AHB_FOR_GPIO],[lm4f*],[1]) -RTEMS_BSPOPTS_SET([LM3S69XX_USE_AHB_FOR_GPIO],[*],[0]) -RTEMS_BSPOPTS_HELP([LM3S69XX_USE_AHB_FOR_GPIO],[use AHB apperture to access GPIO registers]) - -RTEMS_BSPOPTS_SET([LM3S69XX_MCU_LM3S3749],[lm3s3749*],[1]) -RTEMS_BSPOPTS_HELP([LM3S69XX_MCU_LM3S3749],[board has LM3S3749 MCU]) - -RTEMS_BSPOPTS_SET([LM3S69XX_MCU_LM3S6965],[lm3s6965*],[1]) -RTEMS_BSPOPTS_HELP([LM3S69XX_MCU_LM3S6965],[board has LM3S6965 MCU]) - -RTEMS_BSPOPTS_SET([LM3S69XX_MCU_LM4F120],[lm4f120*],[1]) -RTEMS_BSPOPTS_HELP([LM3S69XX_MCU_LM4F120],[board has LM4F120xxx MCU]) - -RTEMS_BSP_CLEANUP_OPTIONS - -AC_CONFIG_FILES([Makefile]) -AC_OUTPUT |