diff options
Diffstat (limited to 'c/src/lib/libbsp/arm/altera-cyclone-v/configure.ac')
| -rw-r--r-- | c/src/lib/libbsp/arm/altera-cyclone-v/configure.ac | 81 |
1 files changed, 0 insertions, 81 deletions
diff --git a/c/src/lib/libbsp/arm/altera-cyclone-v/configure.ac b/c/src/lib/libbsp/arm/altera-cyclone-v/configure.ac deleted file mode 100644 index ad08d92ebc..0000000000 --- a/c/src/lib/libbsp/arm/altera-cyclone-v/configure.ac +++ /dev/null @@ -1,81 +0,0 @@ -## -# -# @file -# -# @brief Configure script of LibBSP for the Altera Cyclone-V platform. -# - -AC_PREREQ([2.69]) -AC_INIT([rtems-c-src-lib-libbsp-arm-xilinx-zynq-a9],[_RTEMS_VERSION],[https://devel.rtems.org/newticket]) -RTEMS_TOP(../../../../../..) -RTEMS_SOURCE_TOP -RTEMS_BUILD_TOP -RTEMS_BSP_LINKCMDS - -RTEMS_CANONICAL_TARGET_CPU -AM_INIT_AUTOMAKE([no-define nostdinc foreign 1.12.2]) -RTEMS_BSP_CONFIGURE - - - -RTEMS_BSPOPTS_SET([BSP_START_RESET_VECTOR],[*],[]) -RTEMS_BSPOPTS_HELP([BSP_START_RESET_VECTOR],[reset vector address for BSP start]) - -RTEMS_BSPOPTS_SET([BSP_DATA_CACHE_ENABLED],[*],[1]) -RTEMS_BSPOPTS_HELP([BSP_DATA_CACHE_ENABLED],[enable data cache]) - -RTEMS_BSPOPTS_SET([BSP_INSTRUCTION_CACHE_ENABLED],[*],[1]) -RTEMS_BSPOPTS_HELP([BSP_INSTRUCTION_CACHE_ENABLED],[enable instruction cache]) - -RTEMS_BSPOPTS_SET([BSP_FDT_IS_SUPPORTED],[*],[1]) -RTEMS_BSPOPTS_HELP([BSP_FDT_IS_SUPPORTED],[define if FDT is supported]) - -RTEMS_BSPOPTS_SET([BSP_START_COPY_FDT_FROM_U_BOOT],[*],[1]) -RTEMS_BSPOPTS_HELP([BSP_START_COPY_FDT_FROM_U_BOOT],[copy the U-Boot provided FDT to an internal storage]) - -RTEMS_BSPOPTS_SET([BSP_FDT_BLOB_SIZE_MAX],[*],[262144]) -RTEMS_BSPOPTS_HELP([BSP_FDT_BLOB_SIZE_MAX],[maximum size of the FDT blob in bytes]) - -RTEMS_BSPOPTS_SET([BSP_FDT_BLOB_READ_ONLY],[*],[1]) -RTEMS_BSPOPTS_HELP([BSP_FDT_BLOB_READ_ONLY],[place the FDT blob into the read-only data area]) - -RTEMS_BSPOPTS_SET([BSP_FDT_BLOB_COPY_TO_READ_ONLY_LOAD_AREA],[*],[1]) -RTEMS_BSPOPTS_HELP([BSP_FDT_BLOB_COPY_TO_READ_ONLY_LOAD_AREA],[copy the FDT blob into the read-only load area via bsp_fdt_copy()]) - -RTEMS_BSPOPTS_SET([BSP_ARM_A9MPCORE_PERIPHCLK],[*],[]) -RTEMS_BSPOPTS_HELP([BSP_ARM_A9MPCORE_PERIPHCLK],[define to set ARM Cortex-A9 MPCore PERIPHCLK clock frequency in Hz, otherwise alt_clk_freq_get() is used]) - -RTEMS_BSPOPTS_SET([CLOCK_DRIVER_USE_FAST_IDLE],[*qemu],[1]) -RTEMS_BSPOPTS_HELP([CLOCK_DRIVER_USE_FAST_IDLE], -[This sets a mode where the time runs as fast as possible when a clock ISR -occurs while the IDLE thread is executing. This can significantly reduce -simulation times.]) - -RTEMS_BSPOPTS_SET([BSP_CONSOLE_MINOR],[*],[0]) -RTEMS_BSPOPTS_HELP([BSP_CONSOLE_MINOR],[minor number of console device]) - -RTEMS_BSPOPTS_SET([CYCLONE_V_CONFIG_CONSOLE],[*],[0]) -RTEMS_BSPOPTS_HELP([CYCLONE_V_CONFIG_CONSOLE],[configuration for console (UART 0)]) - -RTEMS_BSPOPTS_SET([CYCLONE_V_CONFIG_UART_1],[*],[0]) -RTEMS_BSPOPTS_HELP([CYCLONE_V_CONFIG_UART_1],[configuration for UART 1]) - -RTEMS_BSPOPTS_SET([CYCLONE_V_UART_BAUD],[*],[115200U]) -RTEMS_BSPOPTS_HELP([CYCLONE_V_UART_BAUD],[baud for UARTs]) - -RTEMS_BSPOPTS_SET([BSP_USE_UART_INTERRUPTS],[*],[1]) -RTEMS_BSPOPTS_HELP([BSP_USE_UART_INTERRUPTS],[enable usage of interrupts for the UART modules]) - -RTEMS_BSPOPTS_SET([CYCLONE_V_NO_I2C],[*],[1]) -RTEMS_BSPOPTS_HELP([CYCLONE_V_NO_I2C], -[Number of configured I2C buses. Note that each bus has to be configured in an -apropriate i2cdrv_config array.]) - -RTEMS_BSPOPTS_SET([CYCLONE_V_I2C0_SPEED],[*],[100000]) -RTEMS_BSPOPTS_HELP([CYCLONE_V_I2C0_SPEED],[speed for I2C0 in HZ]) - - -RTEMS_BSP_CLEANUP_OPTIONS - -AC_CONFIG_FILES([Makefile]) -AC_OUTPUT |