summaryrefslogtreecommitdiffstats
path: root/c/src/exec/score/cpu/mips64orion/rtems/score/cpu.h
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--c/src/exec/score/cpu/mips64orion/rtems/score/cpu.h996
1 files changed, 0 insertions, 996 deletions
diff --git a/c/src/exec/score/cpu/mips64orion/rtems/score/cpu.h b/c/src/exec/score/cpu/mips64orion/rtems/score/cpu.h
deleted file mode 100644
index 3138e331f1..0000000000
--- a/c/src/exec/score/cpu/mips64orion/rtems/score/cpu.h
+++ /dev/null
@@ -1,996 +0,0 @@
-/* cpu.h
- *
- * This include file contains information pertaining to the IDT 4650
- * processor.
- *
- * Author: Craig Lebakken <craigl@transition.com>
- *
- * COPYRIGHT (c) 1996 by Transition Networks Inc.
- *
- * To anyone who acknowledges that this file is provided "AS IS"
- * without any express or implied warranty:
- * permission to use, copy, modify, and distribute this file
- * for any purpose is hereby granted without fee, provided that
- * the above copyright notice and this notice appears in all
- * copies, and that the name of Transition Networks not be used in
- * advertising or publicity pertaining to distribution of the
- * software without specific, written prior permission.
- * Transition Networks makes no representations about the suitability
- * of this software for any purpose.
- *
- * Derived from source copyrighted as follows:
- *
- * COPYRIGHT (c) 1989-1999.
- * On-Line Applications Research Corporation (OAR).
- *
- * The license and distribution terms for this file may be
- * found in the file LICENSE in this distribution or at
- * http://www.OARcorp.com/rtems/license.html.
- *
- * $Id$
- */
-/* @(#)cpu.h 08/29/96 1.7 */
-
-#ifndef __CPU_h
-#define __CPU_h
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#include <rtems/score/mips64orion.h> /* pick up machine definitions */
-#ifndef ASM
-#include <rtems/score/types.h>
-#endif
-
-extern int mips_disable_interrupts( void );
-extern void mips_enable_interrupts( int _level );
-extern int mips_disable_global_interrupts( void );
-extern void mips_enable_global_interrupts( void );
-extern void mips_fatal_error ( int error );
-
-/* conditional compilation parameters */
-
-/*
- * Should the calls to _Thread_Enable_dispatch be inlined?
- *
- * If TRUE, then they are inlined.
- * If FALSE, then a subroutine call is made.
- *
- * Basically this is an example of the classic trade-off of size
- * versus speed. Inlining the call (TRUE) typically increases the
- * size of RTEMS while speeding up the enabling of dispatching.
- * [NOTE: In general, the _Thread_Dispatch_disable_level will
- * only be 0 or 1 unless you are in an interrupt handler and that
- * interrupt handler invokes the executive.] When not inlined
- * something calls _Thread_Enable_dispatch which in turns calls
- * _Thread_Dispatch. If the enable dispatch is inlined, then
- * one subroutine call is avoided entirely.]
- */
-
-#define CPU_INLINE_ENABLE_DISPATCH TRUE
-
-/*
- * Should the body of the search loops in _Thread_queue_Enqueue_priority
- * be unrolled one time? In unrolled each iteration of the loop examines
- * two "nodes" on the chain being searched. Otherwise, only one node
- * is examined per iteration.
- *
- * If TRUE, then the loops are unrolled.
- * If FALSE, then the loops are not unrolled.
- *
- * The primary factor in making this decision is the cost of disabling
- * and enabling interrupts (_ISR_Flash) versus the cost of rest of the
- * body of the loop. On some CPUs, the flash is more expensive than
- * one iteration of the loop body. In this case, it might be desirable
- * to unroll the loop. It is important to note that on some CPUs, this
- * code is the longest interrupt disable period in RTEMS. So it is
- * necessary to strike a balance when setting this parameter.
- */
-
-#define CPU_UNROLL_ENQUEUE_PRIORITY TRUE
-
-/*
- * Does RTEMS manage a dedicated interrupt stack in software?
- *
- * If TRUE, then a stack is allocated in _ISR_Handler_initialization.
- * If FALSE, nothing is done.
- *
- * If the CPU supports a dedicated interrupt stack in hardware,
- * then it is generally the responsibility of the BSP to allocate it
- * and set it up.
- *
- * If the CPU does not support a dedicated interrupt stack, then
- * the porter has two options: (1) execute interrupts on the
- * stack of the interrupted task, and (2) have RTEMS manage a dedicated
- * interrupt stack.
- *
- * If this is TRUE, CPU_ALLOCATE_INTERRUPT_STACK should also be TRUE.
- *
- * Only one of CPU_HAS_SOFTWARE_INTERRUPT_STACK and
- * CPU_HAS_HARDWARE_INTERRUPT_STACK should be set to TRUE. It is
- * possible that both are FALSE for a particular CPU. Although it
- * is unclear what that would imply about the interrupt processing
- * procedure on that CPU.
- */
-
-#define CPU_HAS_SOFTWARE_INTERRUPT_STACK FALSE
-
-/*
- * Does this CPU have hardware support for a dedicated interrupt stack?
- *
- * If TRUE, then it must be installed during initialization.
- * If FALSE, then no installation is performed.
- *
- * If this is TRUE, CPU_ALLOCATE_INTERRUPT_STACK should also be TRUE.
- *
- * Only one of CPU_HAS_SOFTWARE_INTERRUPT_STACK and
- * CPU_HAS_HARDWARE_INTERRUPT_STACK should be set to TRUE. It is
- * possible that both are FALSE for a particular CPU. Although it
- * is unclear what that would imply about the interrupt processing
- * procedure on that CPU.
- */
-
-#define CPU_HAS_HARDWARE_INTERRUPT_STACK FALSE
-
-/*
- * Does RTEMS allocate a dedicated interrupt stack in the Interrupt Manager?
- *
- * If TRUE, then the memory is allocated during initialization.
- * If FALSE, then the memory is allocated during initialization.
- *
- * This should be TRUE is CPU_HAS_SOFTWARE_INTERRUPT_STACK is TRUE
- * or CPU_INSTALL_HARDWARE_INTERRUPT_STACK is TRUE.
- */
-
-#define CPU_ALLOCATE_INTERRUPT_STACK FALSE
-
-/*
- * Does the RTEMS invoke the user's ISR with the vector number and
- * a pointer to the saved interrupt frame (1) or just the vector
- * number (0)?
- */
-
-#define CPU_ISR_PASSES_FRAME_POINTER 0
-
-/*
- * Does the CPU have hardware floating point?
- *
- * If TRUE, then the RTEMS_FLOATING_POINT task attribute is supported.
- * If FALSE, then the RTEMS_FLOATING_POINT task attribute is ignored.
- *
- * If there is a FP coprocessor such as the i387 or mc68881, then
- * the answer is TRUE.
- *
- * The macro name "MIPS64ORION_HAS_FPU" should be made CPU specific.
- * It indicates whether or not this CPU model has FP support. For
- * example, it would be possible to have an i386_nofp CPU model
- * which set this to false to indicate that you have an i386 without
- * an i387 and wish to leave floating point support out of RTEMS.
- */
-
-#if ( MIPS64ORION_HAS_FPU == 1 )
-#define CPU_HARDWARE_FP TRUE
-#else
-#define CPU_HARDWARE_FP FALSE
-#endif
-#define CPU_SOFTWARE_FP FALSE
-
-/*
- * Are all tasks RTEMS_FLOATING_POINT tasks implicitly?
- *
- * If TRUE, then the RTEMS_FLOATING_POINT task attribute is assumed.
- * If FALSE, then the RTEMS_FLOATING_POINT task attribute is followed.
- *
- * So far, the only CPU in which this option has been used is the
- * HP PA-RISC. The HP C compiler and gcc both implicitly use the
- * floating point registers to perform integer multiplies. If
- * a function which you would not think utilize the FP unit DOES,
- * then one can not easily predict which tasks will use the FP hardware.
- * In this case, this option should be TRUE.
- *
- * If CPU_HARDWARE_FP is FALSE, then this should be FALSE as well.
- */
-
-#define CPU_ALL_TASKS_ARE_FP FALSE
-
-/*
- * Should the IDLE task have a floating point context?
- *
- * If TRUE, then the IDLE task is created as a RTEMS_FLOATING_POINT task
- * and it has a floating point context which is switched in and out.
- * If FALSE, then the IDLE task does not have a floating point context.
- *
- * Setting this to TRUE negatively impacts the time required to preempt
- * the IDLE task from an interrupt because the floating point context
- * must be saved as part of the preemption.
- */
-
-#define CPU_IDLE_TASK_IS_FP FALSE
-
-/*
- * Should the saving of the floating point registers be deferred
- * until a context switch is made to another different floating point
- * task?
- *
- * If TRUE, then the floating point context will not be stored until
- * necessary. It will remain in the floating point registers and not
- * disturned until another floating point task is switched to.
- *
- * If FALSE, then the floating point context is saved when a floating
- * point task is switched out and restored when the next floating point
- * task is restored. The state of the floating point registers between
- * those two operations is not specified.
- *
- * If the floating point context does NOT have to be saved as part of
- * interrupt dispatching, then it should be safe to set this to TRUE.
- *
- * Setting this flag to TRUE results in using a different algorithm
- * for deciding when to save and restore the floating point context.
- * The deferred FP switch algorithm minimizes the number of times
- * the FP context is saved and restored. The FP context is not saved
- * until a context switch is made to another, different FP task.
- * Thus in a system with only one FP task, the FP context will never
- * be saved or restored.
- */
-
-#define CPU_USE_DEFERRED_FP_SWITCH TRUE
-
-/*
- * Does this port provide a CPU dependent IDLE task implementation?
- *
- * If TRUE, then the routine _CPU_Internal_threads_Idle_thread_body
- * must be provided and is the default IDLE thread body instead of
- * _Internal_threads_Idle_thread_body.
- *
- * If FALSE, then use the generic IDLE thread body if the BSP does
- * not provide one.
- *
- * This is intended to allow for supporting processors which have
- * a low power or idle mode. When the IDLE thread is executed, then
- * the CPU can be powered down.
- *
- * The order of precedence for selecting the IDLE thread body is:
- *
- * 1. BSP provided
- * 2. CPU dependent (if provided)
- * 3. generic (if no BSP and no CPU dependent)
- */
-
-/* we can use the low power wait instruction for the IDLE thread */
-#define CPU_PROVIDES_IDLE_THREAD_BODY TRUE
-
-/*
- * Does the stack grow up (toward higher addresses) or down
- * (toward lower addresses)?
- *
- * If TRUE, then the grows upward.
- * If FALSE, then the grows toward smaller addresses.
- */
-
-/* our stack grows down */
-#define CPU_STACK_GROWS_UP FALSE
-
-/*
- * The following is the variable attribute used to force alignment
- * of critical RTEMS structures. On some processors it may make
- * sense to have these aligned on tighter boundaries than
- * the minimum requirements of the compiler in order to have as
- * much of the critical data area as possible in a cache line.
- *
- * The placement of this macro in the declaration of the variables
- * is based on the syntactically requirements of the GNU C
- * "__attribute__" extension. For example with GNU C, use
- * the following to force a structures to a 32 byte boundary.
- *
- * __attribute__ ((aligned (32)))
- *
- * NOTE: Currently only the Priority Bit Map table uses this feature.
- * To benefit from using this, the data must be heavily
- * used so it will stay in the cache and used frequently enough
- * in the executive to justify turning this on.
- */
-
-/* our cache line size is 16 bytes */
-#if __GNUC__
-#define CPU_STRUCTURE_ALIGNMENT __attribute__ ((aligned (16)))
-#else
-#define CPU_STRUCTURE_ALIGNMENT
-#endif
-
-/*
- * Define what is required to specify how the network to host conversion
- * routines are handled.
- */
-
-#define CPU_HAS_OWN_HOST_TO_NETWORK_ROUTINES FALSE
-#define CPU_BIG_ENDIAN TRUE
-#define CPU_LITTLE_ENDIAN FALSE
-
-/*
- * The following defines the number of bits actually used in the
- * interrupt field of the task mode. How those bits map to the
- * CPU interrupt levels is defined by the routine _CPU_ISR_Set_level().
- */
-
-#define CPU_MODES_INTERRUPT_MASK 0x00000001
-
-/*
- * Processor defined structures
- *
- * Examples structures include the descriptor tables from the i386
- * and the processor control structure on the i960ca.
- */
-
-/* may need to put some structures here. */
-
-/*
- * Contexts
- *
- * Generally there are 2 types of context to save.
- * 1. Interrupt registers to save
- * 2. Task level registers to save
- *
- * This means we have the following 3 context items:
- * 1. task level context stuff:: Context_Control
- * 2. floating point task stuff:: Context_Control_fp
- * 3. special interrupt level context :: Context_Control_interrupt
- *
- * On some processors, it is cost-effective to save only the callee
- * preserved registers during a task context switch. This means
- * that the ISR code needs to save those registers which do not
- * persist across function calls. It is not mandatory to make this
- * distinctions between the caller/callee saves registers for the
- * purpose of minimizing context saved during task switch and on interrupts.
- * If the cost of saving extra registers is minimal, simplicity is the
- * choice. Save the same context on interrupt entry as for tasks in
- * this case.
- *
- * Additionally, if gdb is to be made aware of RTEMS tasks for this CPU, then
- * care should be used in designing the context area.
- *
- * On some CPUs with hardware floating point support, the Context_Control_fp
- * structure will not be used or it simply consist of an array of a
- * fixed number of bytes. This is done when the floating point context
- * is dumped by a "FP save context" type instruction and the format
- * is not really defined by the CPU. In this case, there is no need
- * to figure out the exact format -- only the size. Of course, although
- * this is enough information for RTEMS, it is probably not enough for
- * a debugger such as gdb. But that is another problem.
- */
-
-/* WARNING: If this structure is modified, the constants in cpu.h must be updated. */
-typedef struct {
- unsigned64 s0;
- unsigned64 s1;
- unsigned64 s2;
- unsigned64 s3;
- unsigned64 s4;
- unsigned64 s5;
- unsigned64 s6;
- unsigned64 s7;
- unsigned64 sp;
- unsigned64 fp;
- unsigned64 ra;
- unsigned64 c0_sr;
- unsigned64 c0_epc;
-} Context_Control;
-
-/* WARNING: If this structure is modified, the constants in cpu.h must be updated. */
-typedef struct {
- unsigned32 fp0;
- unsigned32 fp1;
- unsigned32 fp2;
- unsigned32 fp3;
- unsigned32 fp4;
- unsigned32 fp5;
- unsigned32 fp6;
- unsigned32 fp7;
- unsigned32 fp8;
- unsigned32 fp9;
- unsigned32 fp10;
- unsigned32 fp11;
- unsigned32 fp12;
- unsigned32 fp13;
- unsigned32 fp14;
- unsigned32 fp15;
- unsigned32 fp16;
- unsigned32 fp17;
- unsigned32 fp18;
- unsigned32 fp19;
- unsigned32 fp20;
- unsigned32 fp21;
- unsigned32 fp22;
- unsigned32 fp23;
- unsigned32 fp24;
- unsigned32 fp25;
- unsigned32 fp26;
- unsigned32 fp27;
- unsigned32 fp28;
- unsigned32 fp29;
- unsigned32 fp30;
- unsigned32 fp31;
-} Context_Control_fp;
-
-typedef struct {
- unsigned32 special_interrupt_register;
-} CPU_Interrupt_frame;
-
-
-/*
- * The following table contains the information required to configure
- * the mips processor specific parameters.
- */
-
-typedef struct {
- void (*pretasking_hook)( void );
- void (*predriver_hook)( void );
- void (*postdriver_hook)( void );
- void (*idle_task)( void );
- boolean do_zero_of_workspace;
- unsigned32 idle_task_stack_size;
- unsigned32 interrupt_stack_size;
- unsigned32 extra_mpci_receive_server_stack;
- void * (*stack_allocate_hook)( unsigned32 );
- void (*stack_free_hook)( void* );
- /* end of fields required on all CPUs */
-
- unsigned32 clicks_per_microsecond;
-} rtems_cpu_table;
-
-/*
- * Macros to access required entires in the CPU Table are in
- * the file rtems/system.h.
- */
-
-/*
- * Macros to access MIPS64ORION specific additions to the CPU Table
- */
-
-#define rtems_cpu_configuration_get_clicks_per_microsecond() \
- (_CPU_Table.clicks_per_microsecond)
-
-/*
- * This variable is optional. It is used on CPUs on which it is difficult
- * to generate an "uninitialized" FP context. It is filled in by
- * _CPU_Initialize and copied into the task's FP context area during
- * _CPU_Context_Initialize.
- */
-
-SCORE_EXTERN Context_Control_fp _CPU_Null_fp_context;
-
-/*
- * On some CPUs, RTEMS supports a software managed interrupt stack.
- * This stack is allocated by the Interrupt Manager and the switch
- * is performed in _ISR_Handler. These variables contain pointers
- * to the lowest and highest addresses in the chunk of memory allocated
- * for the interrupt stack. Since it is unknown whether the stack
- * grows up or down (in general), this give the CPU dependent
- * code the option of picking the version it wants to use.
- *
- * NOTE: These two variables are required if the macro
- * CPU_HAS_SOFTWARE_INTERRUPT_STACK is defined as TRUE.
- */
-
-SCORE_EXTERN void *_CPU_Interrupt_stack_low;
-SCORE_EXTERN void *_CPU_Interrupt_stack_high;
-
-/*
- * With some compilation systems, it is difficult if not impossible to
- * call a high-level language routine from assembly language. This
- * is especially true of commercial Ada compilers and name mangling
- * C++ ones. This variable can be optionally defined by the CPU porter
- * and contains the address of the routine _Thread_Dispatch. This
- * can make it easier to invoke that routine at the end of the interrupt
- * sequence (if a dispatch is necessary).
- */
-
-SCORE_EXTERN void (*_CPU_Thread_dispatch_pointer)();
-
-/*
- * Nothing prevents the porter from declaring more CPU specific variables.
- */
-
-/* XXX: if needed, put more variables here */
-
-/*
- * The size of the floating point context area. On some CPUs this
- * will not be a "sizeof" because the format of the floating point
- * area is not defined -- only the size is. This is usually on
- * CPUs with a "floating point save context" instruction.
- */
-
-#define CPU_CONTEXT_FP_SIZE sizeof( Context_Control_fp )
-
-/*
- * Amount of extra stack (above minimum stack size) required by
- * system initialization thread. Remember that in a multiprocessor
- * system the system intialization thread becomes the MP server thread.
- */
-
-#define CPU_MPCI_RECEIVE_SERVER_EXTRA_STACK 0
-
-/*
- * This defines the number of entries in the ISR_Vector_table managed
- * by RTEMS.
- */
-
-#define CPU_INTERRUPT_NUMBER_OF_VECTORS 8
-#define CPU_INTERRUPT_MAXIMUM_VECTOR_NUMBER (CPU_INTERRUPT_NUMBER_OF_VECTORS - 1)
-
-/*
- * This is defined if the port has a special way to report the ISR nesting
- * level. Most ports maintain the variable _ISR_Nest_level.
- */
-
-#define CPU_PROVIDES_ISR_IS_IN_PROGRESS FALSE
-
-/*
- * Should be large enough to run all RTEMS tests. This insures
- * that a "reasonable" small application should not have any problems.
- */
-
-#define CPU_STACK_MINIMUM_SIZE (2048*sizeof(unsigned32))
-
-/*
- * CPU's worst alignment requirement for data types on a byte boundary. This
- * alignment does not take into account the requirements for the stack.
- */
-
-#define CPU_ALIGNMENT 8
-
-/*
- * This number corresponds to the byte alignment requirement for the
- * heap handler. This alignment requirement may be stricter than that
- * for the data types alignment specified by CPU_ALIGNMENT. It is
- * common for the heap to follow the same alignment requirement as
- * CPU_ALIGNMENT. If the CPU_ALIGNMENT is strict enough for the heap,
- * then this should be set to CPU_ALIGNMENT.
- *
- * NOTE: This does not have to be a power of 2. It does have to
- * be greater or equal to than CPU_ALIGNMENT.
- */
-
-#define CPU_HEAP_ALIGNMENT CPU_ALIGNMENT
-
-/*
- * This number corresponds to the byte alignment requirement for memory
- * buffers allocated by the partition manager. This alignment requirement
- * may be stricter than that for the data types alignment specified by
- * CPU_ALIGNMENT. It is common for the partition to follow the same
- * alignment requirement as CPU_ALIGNMENT. If the CPU_ALIGNMENT is strict
- * enough for the partition, then this should be set to CPU_ALIGNMENT.
- *
- * NOTE: This does not have to be a power of 2. It does have to
- * be greater or equal to than CPU_ALIGNMENT.
- */
-
-#define CPU_PARTITION_ALIGNMENT CPU_ALIGNMENT
-
-/*
- * This number corresponds to the byte alignment requirement for the
- * stack. This alignment requirement may be stricter than that for the
- * data types alignment specified by CPU_ALIGNMENT. If the CPU_ALIGNMENT
- * is strict enough for the stack, then this should be set to 0.
- *
- * NOTE: This must be a power of 2 either 0 or greater than CPU_ALIGNMENT.
- */
-
-#define CPU_STACK_ALIGNMENT CPU_ALIGNMENT
-
-/*
- * ISR handler macros
- */
-
-/*
- * Support routine to initialize the RTEMS vector table after it is allocated.
- */
-
-#define _CPU_Initialize_vectors()
-
-/*
- * Disable all interrupts for an RTEMS critical section. The previous
- * level is returned in _level.
- */
-
-#define _CPU_ISR_Disable( _int_level ) \
- do{ \
- _int_level = mips_disable_interrupts(); \
- }while(0)
-
-/*
- * Enable interrupts to the previous level (returned by _CPU_ISR_Disable).
- * This indicates the end of an RTEMS critical section. The parameter
- * _level is not modified.
- */
-
-#define _CPU_ISR_Enable( _level ) \
- do{ \
- mips_enable_interrupts(_level); \
- }while(0)
-
-/*
- * This temporarily restores the interrupt to _level before immediately
- * disabling them again. This is used to divide long RTEMS critical
- * sections into two or more parts. The parameter _level is not
- * modified.
- */
-
-#define _CPU_ISR_Flash( _xlevel ) \
- do{ \
- int _scratch; \
- _CPU_ISR_Enable( _xlevel ); \
- _CPU_ISR_Disable( _scratch ); \
- }while(0)
-
-/*
- * Map interrupt level in task mode onto the hardware that the CPU
- * actually provides. Currently, interrupt levels which do not
- * map onto the CPU in a generic fashion are undefined. Someday,
- * it would be nice if these were "mapped" by the application
- * via a callout. For example, m68k has 8 levels 0 - 7, levels
- * 8 - 255 would be available for bsp/application specific meaning.
- * This could be used to manage a programmable interrupt controller
- * via the rtems_task_mode directive.
- */
-extern void _CPU_ISR_Set_level( unsigned32 _new_level );
-
-unsigned32 _CPU_ISR_Get_level( void );
-
-/* end of ISR handler macros */
-
-/* Context handler macros */
-
-/*
- * Initialize the context to a state suitable for starting a
- * task after a context restore operation. Generally, this
- * involves:
- *
- * - setting a starting address
- * - preparing the stack
- * - preparing the stack and frame pointers
- * - setting the proper interrupt level in the context
- * - initializing the floating point context
- *
- * This routine generally does not set any unnecessary register
- * in the context. The state of the "general data" registers is
- * undefined at task start time.
- *
- * NOTE: This is_fp parameter is TRUE if the thread is to be a floating
- * point thread. This is typically only used on CPUs where the
- * FPU may be easily disabled by software such as on the SPARC
- * where the PSR contains an enable FPU bit.
- */
-
-#define _CPU_Context_Initialize( _the_context, _stack_base, _size, \
- _isr, _entry_point, _is_fp ) \
- { \
- unsigned32 _stack_tmp = (unsigned32)(_stack_base) + (_size) - CPU_STACK_ALIGNMENT; \
- _stack_tmp &= ~(CPU_STACK_ALIGNMENT - 1); \
- (_the_context)->sp = _stack_tmp; \
- (_the_context)->fp = _stack_tmp; \
- (_the_context)->ra = (unsigned64)_entry_point; \
- (_the_context)->c0_sr = 0; \
- }
-
-/*
- * This routine is responsible for somehow restarting the currently
- * executing task. If you are lucky, then all that is necessary
- * is restoring the context. Otherwise, there will need to be
- * a special assembly routine which does something special in this
- * case. Context_Restore should work most of the time. It will
- * not work if restarting self conflicts with the stack frame
- * assumptions of restoring a context.
- */
-
-#define _CPU_Context_Restart_self( _the_context ) \
- _CPU_Context_restore( (_the_context) );
-
-/*
- * The purpose of this macro is to allow the initial pointer into
- * A floating point context area (used to save the floating point
- * context) to be at an arbitrary place in the floating point
- * context area.
- *
- * This is necessary because some FP units are designed to have
- * their context saved as a stack which grows into lower addresses.
- * Other FP units can be saved by simply moving registers into offsets
- * from the base of the context area. Finally some FP units provide
- * a "dump context" instruction which could fill in from high to low
- * or low to high based on the whim of the CPU designers.
- */
-
-#define _CPU_Context_Fp_start( _base, _offset ) \
- ( (void *) _Addresses_Add_offset( (_base), (_offset) ) )
-
-/*
- * This routine initializes the FP context area passed to it to.
- * There are a few standard ways in which to initialize the
- * floating point context. The code included for this macro assumes
- * that this is a CPU in which a "initial" FP context was saved into
- * _CPU_Null_fp_context and it simply copies it to the destination
- * context passed to it.
- *
- * Other models include (1) not doing anything, and (2) putting
- * a "null FP status word" in the correct place in the FP context.
- */
-
-#define _CPU_Context_Initialize_fp( _destination ) \
- { \
- *((Context_Control_fp *) *((void **) _destination)) = _CPU_Null_fp_context; \
- }
-
-/* end of Context handler macros */
-
-/* Fatal Error manager macros */
-
-/*
- * This routine copies _error into a known place -- typically a stack
- * location or a register, optionally disables interrupts, and
- * halts/stops the CPU.
- */
-
-#define _CPU_Fatal_halt( _error ) \
- { \
- mips_disable_global_interrupts(); \
- mips_fatal_error(_error); \
- }
-
-/* end of Fatal Error manager macros */
-
-/* Bitfield handler macros */
-
-/*
- * This routine sets _output to the bit number of the first bit
- * set in _value. _value is of CPU dependent type Priority_Bit_map_control.
- * This type may be either 16 or 32 bits wide although only the 16
- * least significant bits will be used.
- *
- * There are a number of variables in using a "find first bit" type
- * instruction.
- *
- * (1) What happens when run on a value of zero?
- * (2) Bits may be numbered from MSB to LSB or vice-versa.
- * (3) The numbering may be zero or one based.
- * (4) The "find first bit" instruction may search from MSB or LSB.
- *
- * RTEMS guarantees that (1) will never happen so it is not a concern.
- * (2),(3), (4) are handled by the macros _CPU_Priority_mask() and
- * _CPU_Priority_bits_index(). These three form a set of routines
- * which must logically operate together. Bits in the _value are
- * set and cleared based on masks built by _CPU_Priority_mask().
- * The basic major and minor values calculated by _Priority_Major()
- * and _Priority_Minor() are "massaged" by _CPU_Priority_bits_index()
- * to properly range between the values returned by the "find first bit"
- * instruction. This makes it possible for _Priority_Get_highest() to
- * calculate the major and directly index into the minor table.
- * This mapping is necessary to ensure that 0 (a high priority major/minor)
- * is the first bit found.
- *
- * This entire "find first bit" and mapping process depends heavily
- * on the manner in which a priority is broken into a major and minor
- * components with the major being the 4 MSB of a priority and minor
- * the 4 LSB. Thus (0 << 4) + 0 corresponds to priority 0 -- the highest
- * priority. And (15 << 4) + 14 corresponds to priority 254 -- the next
- * to the lowest priority.
- *
- * If your CPU does not have a "find first bit" instruction, then
- * there are ways to make do without it. Here are a handful of ways
- * to implement this in software:
- *
- * - a series of 16 bit test instructions
- * - a "binary search using if's"
- * - _number = 0
- * if _value > 0x00ff
- * _value >>=8
- * _number = 8;
- *
- * if _value > 0x0000f
- * _value >=8
- * _number += 4
- *
- * _number += bit_set_table[ _value ]
- *
- * where bit_set_table[ 16 ] has values which indicate the first
- * bit set
- */
-
-#define CPU_USE_GENERIC_BITFIELD_CODE TRUE
-#define CPU_USE_GENERIC_BITFIELD_DATA TRUE
-
-#if (CPU_USE_GENERIC_BITFIELD_CODE == FALSE)
-
-#define _CPU_Bitfield_Find_first_bit( _value, _output ) \
- { \
- (_output) = 0; /* do something to prevent warnings */ \
- }
-
-#endif
-
-/* end of Bitfield handler macros */
-
-/*
- * This routine builds the mask which corresponds to the bit fields
- * as searched by _CPU_Bitfield_Find_first_bit(). See the discussion
- * for that routine.
- */
-
-#if (CPU_USE_GENERIC_BITFIELD_CODE == FALSE)
-
-#define _CPU_Priority_Mask( _bit_number ) \
- ( 1 << (_bit_number) )
-
-#endif
-
-/*
- * This routine translates the bit numbers returned by
- * _CPU_Bitfield_Find_first_bit() into something suitable for use as
- * a major or minor component of a priority. See the discussion
- * for that routine.
- */
-
-#if (CPU_USE_GENERIC_BITFIELD_CODE == FALSE)
-
-#define _CPU_Priority_bits_index( _priority ) \
- (_priority)
-
-#endif
-
-/* end of Priority handler macros */
-
-/* functions */
-
-/*
- * _CPU_Initialize
- *
- * This routine performs CPU dependent initialization.
- */
-
-void _CPU_Initialize(
- rtems_cpu_table *cpu_table,
- void (*thread_dispatch)
-);
-
-/*
- * _CPU_ISR_install_raw_handler
- *
- * This routine installs a "raw" interrupt handler directly into the
- * processor's vector table.
- */
-
-void _CPU_ISR_install_raw_handler(
- unsigned32 vector,
- proc_ptr new_handler,
- proc_ptr *old_handler
-);
-
-/*
- * _CPU_ISR_install_vector
- *
- * This routine installs an interrupt vector.
- */
-
-void _CPU_ISR_install_vector(
- unsigned32 vector,
- proc_ptr new_handler,
- proc_ptr *old_handler
-);
-
-/*
- * _CPU_Install_interrupt_stack
- *
- * This routine installs the hardware interrupt stack pointer.
- *
- * NOTE: It need only be provided if CPU_HAS_HARDWARE_INTERRUPT_STACK
- * is TRUE.
- */
-
-void _CPU_Install_interrupt_stack( void );
-
-/*
- * _CPU_Internal_threads_Idle_thread_body
- *
- * This routine is the CPU dependent IDLE thread body.
- *
- * NOTE: It need only be provided if CPU_PROVIDES_IDLE_THREAD_BODY
- * is TRUE.
- */
-
-void _CPU_Thread_Idle_body( void );
-
-/*
- * _CPU_Context_switch
- *
- * This routine switches from the run context to the heir context.
- */
-
-void _CPU_Context_switch(
- Context_Control *run,
- Context_Control *heir
-);
-
-/*
- * _CPU_Context_restore
- *
- * This routine is generally used only to restart self in an
- * efficient manner. It may simply be a label in _CPU_Context_switch.
- *
- * NOTE: May be unnecessary to reload some registers.
- */
-
-void _CPU_Context_restore(
- Context_Control *new_context
-);
-
-/*
- * _CPU_Context_save_fp
- *
- * This routine saves the floating point context passed to it.
- */
-
-void _CPU_Context_save_fp(
- void **fp_context_ptr
-);
-
-/*
- * _CPU_Context_restore_fp
- *
- * This routine restores the floating point context passed to it.
- */
-
-void _CPU_Context_restore_fp(
- void **fp_context_ptr
-);
-
-/* The following routine swaps the endian format of an unsigned int.
- * It must be static because it is referenced indirectly.
- *
- * This version will work on any processor, but if there is a better
- * way for your CPU PLEASE use it. The most common way to do this is to:
- *
- * swap least significant two bytes with 16-bit rotate
- * swap upper and lower 16-bits
- * swap most significant two bytes with 16-bit rotate
- *
- * Some CPUs have special instructions which swap a 32-bit quantity in
- * a single instruction (e.g. i486). It is probably best to avoid
- * an "endian swapping control bit" in the CPU. One good reason is
- * that interrupts would probably have to be disabled to insure that
- * an interrupt does not try to access the same "chunk" with the wrong
- * endian. Another good reason is that on some CPUs, the endian bit
- * endianness for ALL fetches -- both code and data -- so the code
- * will be fetched incorrectly.
- */
-
-static inline unsigned int CPU_swap_u32(
- unsigned int value
-)
-{
- unsigned32 byte1, byte2, byte3, byte4, swapped;
-
- byte4 = (value >> 24) & 0xff;
- byte3 = (value >> 16) & 0xff;
- byte2 = (value >> 8) & 0xff;
- byte1 = value & 0xff;
-
- swapped = (byte1 << 24) | (byte2 << 16) | (byte3 << 8) | byte4;
- return( swapped );
-}
-
-#define CPU_swap_u16( value ) \
- (((value&0xff) << 8) | ((value >> 8)&0xff))
-
-/*
- * Miscellaneous prototypes
- *
- * NOTE: The names should have mips64orion in them.
- */
-
-void disable_int( unsigned32 mask );
-void enable_int( unsigned32 mask );
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif