diff options
Diffstat (limited to 'c/src/exec/score/cpu/hppa1.1/cpu_asm.s')
| -rw-r--r-- | c/src/exec/score/cpu/hppa1.1/cpu_asm.s | 797 |
1 files changed, 0 insertions, 797 deletions
diff --git a/c/src/exec/score/cpu/hppa1.1/cpu_asm.s b/c/src/exec/score/cpu/hppa1.1/cpu_asm.s deleted file mode 100644 index 43a5bb2499..0000000000 --- a/c/src/exec/score/cpu/hppa1.1/cpu_asm.s +++ /dev/null @@ -1,797 +0,0 @@ -# @(#)cpu_asm.S 1.5 - 95/04/24 -# -# -# TODO: -# Context_switch needs to only save callee save registers -# I think this means can skip: r1, r2, r19-29, r31 -# Ref: p 3-2 of Procedure Calling Conventions Manual -# This should be #ifndef DEBUG so that debugger has -# accurate visibility into all registers -# -# This file contains the assembly code for the HPPA implementation -# of RTEMS. -# -# COPYRIGHT (c) 1994,95 by Division Incorporated -# -# To anyone who acknowledges that this file is provided "AS IS" -# without any express or implied warranty: -# permission to use, copy, modify, and distribute this file -# for any purpose is hereby granted without fee, provided that -# the above copyright notice and this notice appears in all -# copies, and that the name of Division Incorporated not be -# used in advertising or publicity pertaining to distribution -# of the software without specific, written prior permission. -# Division Incorporated makes no representations about the -# suitability of this software for any purpose. -# -# $Id$ -# - -#include <rtems/hppa.h> -#include <rtems/cpu_asm.h> -#include <rtems/cpu.h> - -#include <offsets.h> - - .SPACE $PRIVATE$ - .SUBSPA $DATA$,QUAD=1,ALIGN=8,ACCESS=31 - .SUBSPA $BSS$,QUAD=1,ALIGN=8,ACCESS=31,ZERO,SORT=82 - .SPACE $TEXT$ - .SUBSPA $LIT$,QUAD=0,ALIGN=8,ACCESS=44 - .SUBSPA $CODE$,QUAD=0,ALIGN=8,ACCESS=44,CODE_ONLY - .SPACE $TEXT$ - .SUBSPA $CODE$ - -# -# Special register usage for context switch and interrupts -# Stay away from %cr28 which is used for TLB misses on 72000 -# - -isr_arg0 .reg %cr24 -isr_r9 .reg %cr25 - -# -# Interrupt stack frame looks like this -# -# offset item -# ----------------------------------------------------------------- -# INTEGER_CONTEXT_OFFSET Context_Control -# FP_CONTEXT_OFFSET Context_Control_fp -# -# It is padded out to a multiple of 64 -# - - -# PAGE^L -# void __Generic_ISR_Handler() -# -# This routine provides the RTEMS interrupt management. -# -# NOTE: -# Upon entry, the stack will contain a stack frame back to the -# interrupted task. If dispatching is enabled, this is the -# outer most interrupt, (and a context switch is necessary or -# the current task has signals), then set up the stack to -# transfer control to the interrupt dispatcher. -# -# -# We jump here from the interrupt vector. -# The hardware has done some stuff for us: -# PSW saved in IPSW -# PSW set to 0 -# PSW[E] set to default (0) -# PSW[M] set to 1 iff this is HPMC -# -# IIA queue is frozen (since PSW[Q] is now 0) -# privilege level promoted to 0 -# IIR, ISR, IOR potentially updated if PSW[Q] was 1 at trap -# registers GR 1,8,9,16,17,24,25 copied to shadow regs -# SHR 0 1 2 3 4 5 6 -# -# Our vector stub did the following -# placed vector number is in r1 -# -# stub -# r1 <- vector number -# save ipsw under rock -# ipsw = ipsw & ~1 -- disable ints -# save qregs under rock -# qra = _Generic_ISR_handler -# rfi -# -################################################ - -# Distinct Interrupt Entry Points -# -# The following macro and the 32 instantiations of the macro -# are necessary to determine which interrupt vector occurred. -# The following macro allows a unique entry point to be defined -# for each vector. -# -# r9 was loaded with the vector before branching here -# scratch registers available: gr1, gr8, gr9, gr16, gr17, gr24 -# -# NOTE: -# .align 32 doesn not seem to work in the continuation below -# so just have to count 8 instructions -# -# NOTE: -# this whole scheme needs to be rethought for TLB traps which -# have requirements about what tlb faults they can incur. -# ref: TLB Operation Requirements in 1.1 arch book - -#define THANDLER(vector) \ - mtctl %r9, isr_r9 ! \ - b _Generic_ISR_Handler! \ - ldi vector, %r9! \ - nop ! \ - nop ! \ - nop ! \ - nop ! \ - nop - - .align 4096 - .EXPORT IVA_Table,ENTRY,PRIV_LEV=0 -IVA_Table: - .PROC - .CALLINFO FRAME=0,NO_CALLS - .ENTRY - - THANDLER(0) /* unused */ - - THANDLER(HPPA_INTERRUPT_HIGH_PRIORITY_MACHINE_CHECK) - - THANDLER(HPPA_INTERRUPT_POWER_FAIL) - - THANDLER(HPPA_INTERRUPT_RECOVERY_COUNTER) - - THANDLER(HPPA_INTERRUPT_EXTERNAL_INTERRUPT) - - THANDLER(HPPA_INTERRUPT_LOW_PRIORITY_MACHINE_CHECK) - - THANDLER(HPPA_INTERRUPT_INSTRUCTION_TLB_MISS) - - THANDLER(HPPA_INTERRUPT_INSTRUCTION_MEMORY_PROTECTION) - - THANDLER(HPPA_INTERRUPT_ILLEGAL_INSTRUCTION) - - THANDLER(HPPA_INTERRUPT_BREAK_INSTRUCTION) - - THANDLER(HPPA_INTERRUPT_PRIVILEGED_OPERATION) - - THANDLER(HPPA_INTERRUPT_PRIVILEGED_REGISTER) - - THANDLER(HPPA_INTERRUPT_OVERFLOW) - - THANDLER(HPPA_INTERRUPT_CONDITIONAL) - - THANDLER(HPPA_INTERRUPT_ASSIST_EXCEPTION) - - THANDLER(HPPA_INTERRUPT_DATA_TLB_MISS) - - THANDLER(HPPA_INTERRUPT_NON_ACCESS_INSTRUCTION_TLB_MISS) - - THANDLER(HPPA_INTERRUPT_NON_ACCESS_DATA_TLB_MISS) - - THANDLER(HPPA_INTERRUPT_DATA_MEMORY_PROTECTION) - - THANDLER(HPPA_INTERRUPT_DATA_MEMORY_BREAK) - - THANDLER(HPPA_INTERRUPT_TLB_DIRTY_BIT) - - THANDLER(HPPA_INTERRUPT_PAGE_REFERENCE) - - THANDLER(HPPA_INTERRUPT_ASSIST_EMULATION) - - THANDLER(HPPA_INTERRUPT_HIGHER_PRIVILEGE_TRANSFER) - - THANDLER(HPPA_INTERRUPT_LOWER_PRIVILEGE_TRANSFER) - - THANDLER(HPPA_INTERRUPT_TAKEN_BRANCH) - - THANDLER(HPPA_INTERRUPT_DATA_MEMORY_ACCESS_RIGHTS) - - THANDLER(HPPA_INTERRUPT_DATA_MEMORY_PROTECTION_ID) - - THANDLER(HPPA_INTERRUPT_UNALIGNED_DATA_REFERENCE) - - THANDLER(HPPA_INTERRUPT_PERFORMANCE_MONITOR) - - THANDLER(HPPA_INTERRUPT_INSTRUCTION_DEBUG) - - THANDLER(HPPA_INTERRUPT_DATA_DEBUG) - - .EXIT - .PROCEND - - .EXPORT _Generic_ISR_Handler,ENTRY,PRIV_LEV=0 -_Generic_ISR_Handler: - .PROC - .CALLINFO FRAME=0,NO_CALLS - .ENTRY - -# Turn on the D bit in psw so we can start saving stuff on stack -# (interrupt context pieces that need to be saved before the RFI) - - ssm HPPA_PSW_D, %r0 - mtctl arg0, isr_arg0 - -# save interrupt state - mfctl ipsw, arg0 - stw arg0, IPSW_OFFSET(sp) - - mfctl iir, arg0 - stw arg0, IIR_OFFSET(sp) - - mfctl ior, arg0 - stw arg0, IOR_OFFSET(sp) - - mfctl pcoq, arg0 - stw arg0, PCOQFRONT_OFFSET(sp) - - mtctl %r0, pcoq - mfctl pcoq, arg0 - stw arg0, PCOQBACK_OFFSET(sp) - - mfctl %sar, arg0 - stw arg0, SAR_OFFSET(sp) - -# Prepare to re-enter virtual mode -# We need Q in case the interrupt handler enables interrupts -# - - ldil L%CPU_PSW_DEFAULT, arg0 - ldo R%CPU_PSW_DEFAULT(arg0), arg0 - mtctl arg0, ipsw - -# Now jump to "rest_of_isr_handler" with the rfi -# We are assuming the space queues are all correct already - - ldil L%rest_of_isr_handler, arg0 - ldo R%rest_of_isr_handler(arg0), arg0 - mtctl arg0, pcoq - ldo 4(arg0), arg0 - mtctl arg0, pcoq - - rfi - nop - -# At this point we are back in virtual mode and all our -# normal addressing is once again ok. - -rest_of_isr_handler: - -# -# Build an interrupt frame to hold the contexts we will need. -# We have already saved the interrupt items on the stack - -# At this point the following registers are damaged wrt the interrupt -# reg current value saved value -# ------------------------------------------------ -# arg0 scratch isr_arg0 (ctl) -# r9 vector number isr_r9 (ctl) -# -# Point to beginning of integer context and -# save the integer context - stw %r1,R1_OFFSET(sp) - stw %r2,R2_OFFSET(sp) - stw %r3,R3_OFFSET(sp) - stw %r4,R4_OFFSET(sp) - stw %r5,R5_OFFSET(sp) - stw %r6,R6_OFFSET(sp) - stw %r7,R7_OFFSET(sp) - stw %r8,R8_OFFSET(sp) - stw %r9,R9_OFFSET(sp) - stw %r10,R10_OFFSET(sp) - stw %r11,R11_OFFSET(sp) - stw %r12,R12_OFFSET(sp) - stw %r13,R13_OFFSET(sp) - stw %r14,R14_OFFSET(sp) - stw %r15,R15_OFFSET(sp) - stw %r16,R16_OFFSET(sp) - stw %r17,R17_OFFSET(sp) - stw %r18,R18_OFFSET(sp) - stw %r19,R19_OFFSET(sp) - stw %r20,R20_OFFSET(sp) - stw %r21,R21_OFFSET(sp) - stw %r22,R22_OFFSET(sp) - stw %r23,R23_OFFSET(sp) - stw %r24,R24_OFFSET(sp) - stw %r25,R25_OFFSET(sp) - stw %r26,R26_OFFSET(sp) - stw %r27,R27_OFFSET(sp) - stw %r28,R28_OFFSET(sp) - stw %r29,R29_OFFSET(sp) - stw %r30,R30_OFFSET(sp) - stw %r31,R31_OFFSET(sp) - -# Now most registers are available since they have been saved -# -# The following items are currently wrong in the integer context -# reg current value saved value -# ------------------------------------------------ -# arg0 scratch isr_arg0 (ctl) -# r9 vector number isr_r9 (ctl) -# -# Fix them - - mfctl isr_arg0,%r3 - stw %r3,ARG0_OFFSET(sp) - - mfctl isr_r9,%r3 - stw %r3,R9_OFFSET(sp) - -# -# At this point we are done with isr_arg0, and isr_r9 control registers -# - - -# Point to beginning of float context and -# save the floating point context -- doing whatever patches are necessary - .call ARGW0=GR - bl _CPU_Save_float_context,%r2 - ldo FP_CONTEXT_OFFSET(sp),arg0 - -# save the ptr to interrupt frame as an argument for the interrupt handler - copy sp, arg1 - -# Advance the frame to point beyond all interrupt contexts (integer & float) -# this also includes the pad to align to 64byte stack boundary - ldo CPU_INTERRUPT_FRAME_SIZE(sp), sp - -# r3 -- &_ISR_Nest_level -# r5 -- value _ISR_Nest_level -# r4 -- &_Thread_Dispatch_disable_level -# r6 -- value _Thread_Dispatch_disable_level -# r9 -- vector number - - .import _ISR_Nest_level,data - ldil L%_ISR_Nest_level,%r3 - ldo R%_ISR_Nest_level(%r3),%r3 - ldw 0(%r3),%r5 - - .import _Thread_Dispatch_disable_level,data - ldil L%_Thread_Dispatch_disable_level,%r4 - ldo R%_Thread_Dispatch_disable_level(%r4),%r4 - ldw 0(%r4),%r6 - -# increment interrupt nest level counter. If outermost interrupt -# switch the stack and squirrel away the previous sp. - addi 1,%r5,%r5 - stw %r5, 0(%r3) - -# compute and save new stack (with frame) -# just in case we are nested -- simpler this way - comibf,= 1,%r5,stack_done - ldo 128(sp),%r7 - -# -# Switch to interrupt stack allocated by the interrupt manager (intr.c) -# - .import _CPU_Interrupt_stack_low,data - ldil L%_CPU_Interrupt_stack_low,%r7 - ldw R%_CPU_Interrupt_stack_low(%r7),%r7 - ldo 128(%r7),%r7 - -stack_done: -# save our current stack pointer where the "old sp" is supposed to be - stw sp, -4(%r7) -# and switch stacks (or advance old stack in nested case) - copy %r7, sp - -# increment the dispatch disable level counter. - addi 1,%r6,%r6 - stw %r6, 0(%r4) - -# load address of user handler - .import _ISR_Vector_table,data - ldil L%_ISR_Vector_table,%r8 - ldo R%_ISR_Vector_table(%r8),%r8 - ldwx,s %r9(%r8),%r8 - -# invoke user interrupt handler -# Interrupts are currently disabled, as per RTEMS convention -# The handler has the option of re-enabling interrupts -# NOTE: can not use 'bl' since it uses "pc-relative" addressing -# and we are using a hard coded address from a table -# So... we fudge r2 ourselves (ala dynacall) -# - copy %r9, %r26 - .call ARGW0=GR, ARGW1=GR - blr %r0, rp - bv,n 0(%r8) - -post_user_interrupt_handler: - -# Back from user handler(s) -# Disable external interrupts (since the interrupt handler could -# have turned them on) and return to the interrupted task stack (assuming -# (_ISR_Nest_level == 0) - - rsm HPPA_PSW_I, %r0 - ldw -4(sp), sp - -# r3 -- &_ISR_Nest_level -# r5 -- value _ISR_Nest_level -# r4 -- &_Thread_Dispatch_disable_level -# r6 -- value _Thread_Dispatch_disable_level - - .import _ISR_Nest_level,data - ldil L%_ISR_Nest_level,%r3 - ldo R%_ISR_Nest_level(%r3),%r3 - ldw 0(%r3),%r5 - - .import _Thread_Dispatch_disable_level,data - ldil L%_Thread_Dispatch_disable_level,%r4 - ldo R%_Thread_Dispatch_disable_level(%r4),%r4 - ldw 0(%r4), %r6 - -# decrement isr nest level - addi -1, %r5, %r5 - stw %r5, 0(%r3) - -# decrement dispatch disable level counter and, if not 0, go on - addi -1,%r6,%r6 - comibf,= 0,%r6,isr_restore - stw %r6, 0(%r4) - -# check whether or not a context switch is necessary - .import _Context_Switch_necessary,data - ldil L%_Context_Switch_necessary,%r8 - ldw R%_Context_Switch_necessary(%r8),%r8 - comibf,=,n 0,%r8,ISR_dispatch - -# check whether or not a context switch is necessary because an ISR -# sent signals to the interrupted task - .import _ISR_Signals_to_thread_executing,data - ldil L%_ISR_Signals_to_thread_executing,%r8 - ldw R%_ISR_Signals_to_thread_executing(%r8),%r8 - comibt,=,n 0,%r8,isr_restore - -# OK, something happened while in ISR and we need to switch to a task -# other than the one which was interrupted or the -# ISR_Signals_to_thread_executing case -# We also turn on interrupts, since the interrupted task had them -# on (obviously :-) and Thread_Dispatch is happy to leave ints on. -# - -ISR_dispatch: - ssm HPPA_PSW_I, %r0 - - .import _Thread_Dispatch,code - .call - bl _Thread_Dispatch,%r2 - ldo 128(sp),sp - - ldo -128(sp),sp - - rsm HPPA_PSW_I, %r0 - -isr_restore: - -# Get a pointer to beginning of our stack frame - ldo -CPU_INTERRUPT_FRAME_SIZE(sp), %arg1 - -# restore float - .call ARGW0=GR - bl _CPU_Restore_float_context,%r2 - ldo FP_CONTEXT_OFFSET(%arg1), arg0 - - copy %arg1, %arg0 - -# ********** FALL THRU ********** - -# Jump here from bottom of Context_Switch -# Also called directly by _CPU_Context_Restart_self via _Thread_Restart_self -# restore interrupt state -# - - .EXPORT _CPU_Context_restore -_CPU_Context_restore: - -# Turn off Q & I so we can write pcoq - rsm HPPA_PSW_Q + HPPA_PSW_I, %r0 - - ldw IPSW_OFFSET(arg0), %r8 - mtctl %r8, ipsw - - ldw SAR_OFFSET(arg0), %r9 - mtctl %r9, sar - - ldw PCOQFRONT_OFFSET(arg0), %r10 - mtctl %r10, pcoq - - ldw PCOQBACK_OFFSET(arg0), %r11 - mtctl %r11, pcoq - -# -# restore integer state -# - ldw R1_OFFSET(arg0),%r1 - ldw R2_OFFSET(arg0),%r2 - ldw R3_OFFSET(arg0),%r3 - ldw R4_OFFSET(arg0),%r4 - ldw R5_OFFSET(arg0),%r5 - ldw R6_OFFSET(arg0),%r6 - ldw R7_OFFSET(arg0),%r7 - ldw R8_OFFSET(arg0),%r8 - ldw R9_OFFSET(arg0),%r9 - ldw R10_OFFSET(arg0),%r10 - ldw R11_OFFSET(arg0),%r11 - ldw R12_OFFSET(arg0),%r12 - ldw R13_OFFSET(arg0),%r13 - ldw R14_OFFSET(arg0),%r14 - ldw R15_OFFSET(arg0),%r15 - ldw R16_OFFSET(arg0),%r16 - ldw R17_OFFSET(arg0),%r17 - ldw R18_OFFSET(arg0),%r18 - ldw R19_OFFSET(arg0),%r19 - ldw R20_OFFSET(arg0),%r20 - ldw R21_OFFSET(arg0),%r21 - ldw R22_OFFSET(arg0),%r22 - ldw R23_OFFSET(arg0),%r23 - ldw R24_OFFSET(arg0),%r24 - ldw R25_OFFSET(arg0),%r25 -# skipping r26 (aka arg0) until we are done with it - ldw R27_OFFSET(arg0),%r27 - ldw R28_OFFSET(arg0),%r28 - ldw R29_OFFSET(arg0),%r29 - ldw R30_OFFSET(arg0),%r30 - ldw R31_OFFSET(arg0),%r31 - -# Must load r26 last since it is arg0 - ldw R26_OFFSET(arg0),%r26 - -isr_exit: - rfi - .EXIT - .PROCEND - -# -# This section is used to context switch floating point registers. -# Ref: 6-35 of Architecture 1.1 -# -# NOTE: since integer multiply uses the floating point unit, -# we have to save/restore fp on every trap. We cannot -# just try to keep track of fp usage. - - .align 32 - .EXPORT _CPU_Save_float_context,ENTRY,PRIV_LEV=0 -_CPU_Save_float_context: - .PROC - .CALLINFO FRAME=0,NO_CALLS - .ENTRY - fstds,ma %fr0,8(%arg0) - fstds,ma %fr1,8(%arg0) - fstds,ma %fr2,8(%arg0) - fstds,ma %fr3,8(%arg0) - fstds,ma %fr4,8(%arg0) - fstds,ma %fr5,8(%arg0) - fstds,ma %fr6,8(%arg0) - fstds,ma %fr7,8(%arg0) - fstds,ma %fr8,8(%arg0) - fstds,ma %fr9,8(%arg0) - fstds,ma %fr10,8(%arg0) - fstds,ma %fr11,8(%arg0) - fstds,ma %fr12,8(%arg0) - fstds,ma %fr13,8(%arg0) - fstds,ma %fr14,8(%arg0) - fstds,ma %fr15,8(%arg0) - fstds,ma %fr16,8(%arg0) - fstds,ma %fr17,8(%arg0) - fstds,ma %fr18,8(%arg0) - fstds,ma %fr19,8(%arg0) - fstds,ma %fr20,8(%arg0) - fstds,ma %fr21,8(%arg0) - fstds,ma %fr22,8(%arg0) - fstds,ma %fr23,8(%arg0) - fstds,ma %fr24,8(%arg0) - fstds,ma %fr25,8(%arg0) - fstds,ma %fr26,8(%arg0) - fstds,ma %fr27,8(%arg0) - fstds,ma %fr28,8(%arg0) - fstds,ma %fr29,8(%arg0) - fstds,ma %fr30,8(%arg0) - fstds %fr31,0(%arg0) - bv 0(%r2) - addi -(31*8), %arg0, %arg0 ; restore arg0 just for fun - .EXIT - .PROCEND - - .align 32 - .EXPORT _CPU_Restore_float_context,ENTRY,PRIV_LEV=0 -_CPU_Restore_float_context: - .PROC - .CALLINFO FRAME=0,NO_CALLS - .ENTRY - addi (31*8), %arg0, %arg0 ; point at last double - fldds 0(%arg0),%fr31 - fldds,mb -8(%arg0),%fr30 - fldds,mb -8(%arg0),%fr29 - fldds,mb -8(%arg0),%fr28 - fldds,mb -8(%arg0),%fr27 - fldds,mb -8(%arg0),%fr26 - fldds,mb -8(%arg0),%fr25 - fldds,mb -8(%arg0),%fr24 - fldds,mb -8(%arg0),%fr23 - fldds,mb -8(%arg0),%fr22 - fldds,mb -8(%arg0),%fr21 - fldds,mb -8(%arg0),%fr20 - fldds,mb -8(%arg0),%fr19 - fldds,mb -8(%arg0),%fr18 - fldds,mb -8(%arg0),%fr17 - fldds,mb -8(%arg0),%fr16 - fldds,mb -8(%arg0),%fr15 - fldds,mb -8(%arg0),%fr14 - fldds,mb -8(%arg0),%fr13 - fldds,mb -8(%arg0),%fr12 - fldds,mb -8(%arg0),%fr11 - fldds,mb -8(%arg0),%fr10 - fldds,mb -8(%arg0),%fr9 - fldds,mb -8(%arg0),%fr8 - fldds,mb -8(%arg0),%fr7 - fldds,mb -8(%arg0),%fr6 - fldds,mb -8(%arg0),%fr5 - fldds,mb -8(%arg0),%fr4 - fldds,mb -8(%arg0),%fr3 - fldds,mb -8(%arg0),%fr2 - fldds,mb -8(%arg0),%fr1 - bv 0(%r2) - fldds,mb -8(%arg0),%fr0 - .EXIT - .PROCEND - -# -# These 2 small routines are unused right now. -# Normally we just go thru _CPU_Save_float_context (and Restore) -# -# Here we just deref the ptr and jump up, letting _CPU_Save_float_context -# do the return for us. -# - .EXPORT _CPU_Context_save_fp,ENTRY,PRIV_LEV=0 -_CPU_Context_save_fp: - .PROC - .CALLINFO FRAME=0,NO_CALLS - .ENTRY - bl _CPU_Save_float_context, %r0 - ldw 0(%arg0), %arg0 - .EXIT - .PROCEND - - .EXPORT _CPU_Context_restore_fp,ENTRY,PRIV_LEV=0 -_CPU_Context_restore_fp: - .PROC - .CALLINFO FRAME=0,NO_CALLS - .ENTRY - bl _CPU_Restore_float_context, %r0 - ldw 0(%arg0), %arg0 - .EXIT - .PROCEND - - -# void _CPU_Context_switch( run_context, heir_context ) -# -# This routine performs a normal non-FP context switch. -# - - .align 32 - .EXPORT _CPU_Context_switch,ENTRY,PRIV_LEV=0,ARGW0=GR,ARGW1=GR -_CPU_Context_switch: - .PROC - .CALLINFO FRAME=64 - .ENTRY - -# Save the integer context - stw %r1,R1_OFFSET(arg0) - stw %r2,R2_OFFSET(arg0) - stw %r3,R3_OFFSET(arg0) - stw %r4,R4_OFFSET(arg0) - stw %r5,R5_OFFSET(arg0) - stw %r6,R6_OFFSET(arg0) - stw %r7,R7_OFFSET(arg0) - stw %r8,R8_OFFSET(arg0) - stw %r9,R9_OFFSET(arg0) - stw %r10,R10_OFFSET(arg0) - stw %r11,R11_OFFSET(arg0) - stw %r12,R12_OFFSET(arg0) - stw %r13,R13_OFFSET(arg0) - stw %r14,R14_OFFSET(arg0) - stw %r15,R15_OFFSET(arg0) - stw %r16,R16_OFFSET(arg0) - stw %r17,R17_OFFSET(arg0) - stw %r18,R18_OFFSET(arg0) - stw %r19,R19_OFFSET(arg0) - stw %r20,R20_OFFSET(arg0) - stw %r21,R21_OFFSET(arg0) - stw %r22,R22_OFFSET(arg0) - stw %r23,R23_OFFSET(arg0) - stw %r24,R24_OFFSET(arg0) - stw %r25,R25_OFFSET(arg0) - stw %r26,R26_OFFSET(arg0) - stw %r27,R27_OFFSET(arg0) - stw %r28,R28_OFFSET(arg0) - stw %r29,R29_OFFSET(arg0) - stw %r30,R30_OFFSET(arg0) - stw %r31,R31_OFFSET(arg0) - -# fill in interrupt context section - stw %r2, PCOQFRONT_OFFSET(%arg0) - ldo 4(%r2), %r2 - stw %r2, PCOQBACK_OFFSET(%arg0) - -# Generate a suitable IPSW by using the system default psw -# with the current low bits added in. - - ldil L%CPU_PSW_DEFAULT, %r2 - ldo R%CPU_PSW_DEFAULT(%r2), %r2 - ssm 0, %arg2 - dep %arg2, 31, 8, %r2 - stw %r2, IPSW_OFFSET(%arg0) - -# at this point, the running task context is completely saved -# Now jump to the bottom of the interrupt handler to load the -# heirs context - - b _CPU_Context_restore - copy %arg1, %arg0 - - .EXIT - .PROCEND - - -/* - * Find first bit - * NOTE: - * This is used (and written) only for the ready chain code and - * priority bit maps. - * Any other use constitutes fraud. - * Returns first bit from the least significant side. - * Eg: if input is 0x8001 - * output will indicate the '1' bit and return 0. - * This is counter to HPPA bit numbering which calls this - * bit 31. This way simplifies the macros _CPU_Priority_Mask - * and _CPU_Priority_Bits_index. - * - * NOTE: - * We just use 16 bit version - * does not handle zero case - * - * Based on the UTAH Mach libc version of ffs. - */ - - .align 32 - .EXPORT hppa_rtems_ffs,ENTRY,PRIV_LEV=0,ARGW0=GR -hppa_rtems_ffs: - .PROC - .CALLINFO FRAME=0,NO_CALLS - .ENTRY - -#ifdef RETURN_ERROR_ON_ZERO - comb,= %arg0,%r0,ffsdone ; If arg0 is 0 - ldi -1,%ret0 ; return -1 -#endif - -#if BITFIELD_SIZE == 32 - ldi 31,%ret0 ; Set return to high bit - extru,= %arg0,31,16,%r0 ; If low 16 bits are non-zero - addi,tr -16,%ret0,%ret0 ; subtract 16 from bitpos - shd %r0,%arg0,16,%arg0 ; else shift right 16 bits -#else - ldi 15,%ret0 ; Set return to high bit -#endif - extru,= %arg0,31,8,%r0 ; If low 8 bits are non-zero - addi,tr -8,%ret0,%ret0 ; subtract 8 from bitpos - shd %r0,%arg0,8,%arg0 ; else shift right 8 bits - extru,= %arg0,31,4,%r0 ; If low 4 bits are non-zero - addi,tr -4,%ret0,%ret0 ; subtract 4 from bitpos - shd %r0,%arg0,4,%arg0 ; else shift right 4 bits - extru,= %arg0,31,2,%r0 ; If low 2 bits are non-zero - addi,tr -2,%ret0,%ret0 ; subtract 2 from bitpos - shd %r0,%arg0,2,%arg0 ; else shift right 2 bits - extru,= %arg0,31,1,%r0 ; If low bit is non-zero - addi -1,%ret0,%ret0 ; subtract 1 from bitpos -ffsdone: - bv,n 0(%r2) - nop - .EXIT - .PROCEND |