diff options
Diffstat (limited to '')
| -rw-r--r-- | c/src/exec/posix/aclocal.m4 | 499 | ||||
| -rw-r--r-- | c/src/exec/posix/configure | 132 |
2 files changed, 329 insertions, 302 deletions
diff --git a/c/src/exec/posix/aclocal.m4 b/c/src/exec/posix/aclocal.m4 index 634aec4a3f..4180d7ddc8 100644 --- a/c/src/exec/posix/aclocal.m4 +++ b/c/src/exec/posix/aclocal.m4 @@ -19,6 +19,9 @@ dnl $1 .. relative path from this configure.in to the toplevel configure.in dnl AC_DEFUN(RTEMS_TOP, [dnl +AC_BEFORE([$0], [AC_CONFIG_AUX_DIR])dnl +AC_BEFORE([$0], [AM_INIT_AUTOMAKE])dnl + AC_ARG_WITH(target-subdir, [ --with-target-subdir=DIR], TARGET_SUBDIR="$withval", @@ -44,47 +47,6 @@ fi AC_MSG_RESULT($RTEMS_VERSION) ])dnl -dnl -dnl $Id$ -dnl - -dnl canonicalize target cpu -dnl NOTE: Most rtems targets do not fullfil autoconf's -dnl target naming conventions "processor-vendor-os" -dnl Therefore autoconf's AC_CANONICAL_TARGET will fail for them -dnl and we have to fix it for rtems ourselves - -AC_DEFUN(RTEMS_CANONICAL_TARGET_CPU, -[ -AC_CANONICAL_SYSTEM -AC_MSG_CHECKING(rtems target cpu) -changequote(,)dnl -case "${target}" in - # hpux unix port should go here - i[3456]86-go32-rtems*) - RTEMS_CPU=i386 - ;; - i[3456]86-pc-linux*) # unix "simulator" port - RTEMS_CPU=unix - ;; - i[3456]86-*freebsd2*) # unix "simulator" port - RTEMS_CPU=unix - ;; - no_cpu-*rtems*) - RTEMS_CPU=no_cpu - ;; - sparc-sun-solaris*) # unix "simulator" port - RTEMS_CPU=unix - ;; - *) - RTEMS_CPU=`echo $target | sed 's%^\([^-]*\)-\(.*\)$%\1%'` - ;; -esac -changequote([,])dnl -AC_SUBST(RTEMS_CPU) -AC_MSG_RESULT($RTEMS_CPU) -]) - # Do all the work for Automake. This macro actually does too much -- # some checks are only needed if your package does certain things. # But this isn't really a big deal. @@ -179,6 +141,47 @@ else fi AC_SUBST($1)]) +dnl +dnl $Id$ +dnl + +dnl canonicalize target cpu +dnl NOTE: Most rtems targets do not fullfil autoconf's +dnl target naming conventions "processor-vendor-os" +dnl Therefore autoconf's AC_CANONICAL_TARGET will fail for them +dnl and we have to fix it for rtems ourselves + +AC_DEFUN(RTEMS_CANONICAL_TARGET_CPU, +[ +AC_CANONICAL_SYSTEM +AC_MSG_CHECKING(rtems target cpu) +changequote(,)dnl +case "${target}" in + # hpux unix port should go here + i[3456]86-go32-rtems*) + RTEMS_CPU=i386 + ;; + i[3456]86-pc-linux*) # unix "simulator" port + RTEMS_CPU=unix + ;; + i[3456]86-*freebsd2*) # unix "simulator" port + RTEMS_CPU=unix + ;; + no_cpu-*rtems*) + RTEMS_CPU=no_cpu + ;; + sparc-sun-solaris*) # unix "simulator" port + RTEMS_CPU=unix + ;; + *) + RTEMS_CPU=`echo $target | sed 's%^\([^-]*\)-\(.*\)$%\1%'` + ;; +esac +changequote([,])dnl +AC_SUBST(RTEMS_CPU) +AC_MSG_RESULT($RTEMS_CPU) +]) + # Add --enable-maintainer-mode option to configure. # From Jim Meyering @@ -230,6 +233,8 @@ dnl $Id$ AC_DEFUN(RTEMS_ENABLE_POSIX, [ +AC_BEFORE([$0], [RTEMS_CHECK_POSIX_API])dnl + AC_ARG_ENABLE(posix, [ --enable-posix enable posix interface], [case "${enableval}" in @@ -265,6 +270,55 @@ AC_SUBST(RTEMS_HAS_POSIX_API) ]) dnl $Id$ +dnl +AC_DEFUN(RTEMS_CHECK_POSIX_API, +[dnl +AC_REQUIRE([RTEMS_CHECK_CPU])dnl +AC_REQUIRE([RTEMS_ENABLE_POSIX])dnl + +AC_CACHE_CHECK([whether BSP supports libposix], + rtems_cv_HAS_POSIX_API, + [dnl + case "$RTEMS_CPU" in + unix*) + rtems_cv_HAS_POSIX_API="no" + ;; + *) + if test "${RTEMS_HAS_POSIX_API}" = "yes"; then + rtems_cv_HAS_POSIX_API="yes"; + else + rtems_cv_HAS_POSIX_API="disabled"; + fi + ;; + esac]) +if test "$rtems_cv_HAS_POSIX_API" = "yes"; then + HAS_POSIX_API="yes"; +else + HAS_POSIX_API="no"; +fi +AC_SUBST(HAS_POSIX_API)dnl +]) + +dnl $Id$ + +dnl check if RTEMS support a cpu +AC_DEFUN(RTEMS_CHECK_CPU, +[dnl +AC_REQUIRE([RTEMS_TOP]) +AC_REQUIRE([RTEMS_CANONICAL_TARGET_CPU]) +AC_BEFORE([$0], [RTEMS_CHECK_POSIX_API])dnl + +# Is this a supported CPU? +AC_MSG_CHECKING([if cpu $RTEMS_CPU is supported]) +if test -d "$srcdir/$RTEMS_TOPdir/c/src/exec/score/cpu/$RTEMS_CPU"; then + AC_MSG_RESULT(yes) +else + AC_MSG_ERROR(no) +fi +])dnl + + +dnl $Id$ AC_DEFUN(RTEMS_ENABLE_INLINES, [AC_ARG_ENABLE(rtems-inlines, @@ -285,6 +339,7 @@ dnl used by the toplevel configure script dnl RTEMS_ENABLE_RTEMSBSP(rtems_bsp_list) AC_DEFUN(RTEMS_ENABLE_RTEMSBSP, [ +AC_BEFORE([$0], [RTEMS_ENV_RTEMSBSP])dnl AC_ARG_ENABLE(rtemsbsp, [ --enable-rtemsbsp=bsp1 bsp2 .. BSPs to include in build], [case "${enableval}" in @@ -297,6 +352,12 @@ dnl Pass a single BSP via an environment variable dnl used by per BSP configure scripts AC_DEFUN(RTEMS_ENV_RTEMSBSP, [dnl +AC_BEFORE([$0], [RTEMS_ENABLE_RTEMSBSP])dnl +AC_BEFORE([$0], [RTEMS_PROJECT_ROOT])dnl +AC_BEFORE([$0], [RTEMS_CHECK_CUSTOM_BSP])dnl +AC_BEFORE([$0], [RTEMS_CHECK_MULTIPROCESSING])dnl +AC_BEFORE([$0], [RTEMS_CHECK_POSIX_API])dnl + AC_MSG_CHECKING([for RTEMS_BSP]) AC_CACHE_VAL(rtems_cv_RTEMS_BSP, [dnl @@ -310,22 +371,111 @@ AC_MSG_RESULT(${RTEMS_BSP}) AC_SUBST(RTEMS_BSP) ]) +dnl dnl $Id$ +dnl -dnl check if RTEMS support a cpu -AC_DEFUN(RTEMS_CHECK_CPU, +AC_DEFUN(RTEMS_PROJECT_ROOT, [dnl AC_REQUIRE([RTEMS_TOP]) -AC_REQUIRE([RTEMS_CANONICAL_TARGET_CPU]) -# Is this a supported CPU? -AC_MSG_CHECKING([if cpu $RTEMS_CPU is supported]) -if test -d "$srcdir/$RTEMS_TOPdir/c/src/exec/score/cpu/$RTEMS_CPU"; then - AC_MSG_RESULT(yes) +if test "$TARGET_SUBDIR" = "." ; then +PROJECT_ROOT=$RTEMS_TOPdir/'$(top_builddir)'; else - AC_MSG_ERROR(no) +PROJECT_ROOT=../$RTEMS_TOPdir/'$(top_builddir)' +fi +AC_SUBST(PROJECT_ROOT) + +RTEMS_ROOT=$RTEMS_TOPdir/'$(top_builddir)'/c/$RTEMS_BSP +AC_SUBST(RTEMS_ROOT) + +INSTALL_CHANGE="\$(KSH) \$(PROJECT_ROOT)/tools/build/install-if-change" +AC_SUBST(INSTALL_CHANGE) + +PACKHEX="\$(PROJECT_ROOT)/tools/build/packhex" +AC_SUBST(PACKHEX) +]) + + +dnl $Id$ + +dnl Report all available bsps for a target, +dnl check if a bsp-subdirectory is present for all bsps found +dnl +dnl RTEMS_CHECK_BSPS(bsp_list) +AC_DEFUN(RTEMS_CHECK_BSPS, +[ +AC_REQUIRE([RTEMS_CHECK_CPU])dnl sets RTEMS_CPU, target +AC_REQUIRE([RTEMS_TOP])dnl sets RTEMS_TOPdir +AC_MSG_CHECKING([for bsps]) +case "${target}" in +changequote(,)dnl + i[3456]86-go32-rtems*) +changequote([,])dnl + $1="go32 go32_p5" + ;; + *) + files=`ls $srcdir/$RTEMS_TOPdir/c/src/lib/libbsp/$RTEMS_CPU` + for file in $files; do + case $file in + shared*);; + Makefile*);; + READ*);; + CVS*);; + pxfl*);; + go32*);; # so the i386 port can pick up the other Makefiles + # Now account for BSPs with build variants + gen68360) rtems_bsp="$rtems_bsp gen68360 gen68360_040";; + p4000) rtems_bsp="$rtems_bsp p4600 p4650";; + mvme162) rtems_bsp="$rtems_bsp mvme162 mvme162lx";; + *) $1="[$]$1 $file";; + esac; + done + ;; +esac +AC_MSG_RESULT([[$]$1 .. done]) +])dnl + +AC_DEFUN(RTEMS_CHECK_CUSTOM_BSP, +[dnl +AC_REQUIRE([RTEMS_TOP]) + +AC_MSG_CHECKING([for make/custom/[$]$1.cfg]) +if test -r "$srcdir/$RTEMS_TOPdir/make/custom/[$]$1.cfg"; then + AC_MSG_RESULT([yes]) +else + AC_MSG_ERROR([no]) fi ])dnl +dnl +dnl $Id$ +dnl + +AC_DEFUN(RTEMS_CHECK_MULTIPROCESSING, +[dnl +AC_REQUIRE([RTEMS_TOP])dnl +AC_REQUIRE([RTEMS_CHECK_CPU])dnl +AC_REQUIRE([RTEMS_ENABLE_MULTIPROCESSING])dnl + +AC_CACHE_CHECK([whether BSP supports multiprocessing], + rtems_cv_HAS_MP, + [dnl + if test -d "$srcdir/${RTEMS_TOPdir}/c/src/lib/libbsp/${RTEMS_CPU}/${$1}/shmsupp"; then + if test "$RTEMS_HAS_MULTIPROCESSING" = "yes"; then + rtems_cv_HAS_MP="yes" ; + else + rtems_cv_HAS_MP="disabled"; + fi + else + rtems_cv_HAS_MP="no"; + fi]) +if test "$rtems_cv_HAS_MP" = "yes"; then +HAS_MP="yes" +else +HAS_MP="no" +fi +AC_SUBST(HAS_MP) +]) dnl $Id$ @@ -352,31 +502,6 @@ changequote([,])dnl AC_SUBST(RTEMS_HOST) ])dnl -dnl -dnl $Id$ -dnl - -AC_DEFUN(RTEMS_PROJECT_ROOT, -[dnl -AC_REQUIRE([RTEMS_TOP]) -if test "$TARGET_SUBDIR" = "." ; then -PROJECT_ROOT=$RTEMS_TOPdir/'$(top_builddir)'; -else -PROJECT_ROOT=../$RTEMS_TOPdir/'$(top_builddir)' -fi -AC_SUBST(PROJECT_ROOT) - -RTEMS_ROOT=$RTEMS_TOPdir/'$(top_builddir)'/c/$RTEMS_BSP -AC_SUBST(RTEMS_ROOT) - -INSTALL_CHANGE="\$(KSH) \$(PROJECT_ROOT)/tools/build/install-if-change" -AC_SUBST(INSTALL_CHANGE) - -PACKHEX="\$(PROJECT_ROOT)/tools/build/packhex" -AC_SUBST(PACKHEX) -]) - - dnl $Id$ AC_DEFUN(RTEMS_PATH_KSH, @@ -404,6 +529,7 @@ AC_DEFUN(RTEMS_PROG_CC, [ AC_BEFORE([$0], [AC_PROG_CPP])dnl AC_BEFORE([$0], [AC_PROG_CC])dnl +AC_BEFORE([$0], [RTEMS_CANONICALIZE_TOOLS])dnl AC_REQUIRE([RTEMS_TOOL_PREFIX])dnl dnl Only accept gcc and cc @@ -484,82 +610,6 @@ AC_SUBST(GCCSED) ]) dnl -dnl $Id$ -dnl -dnl Set program_prefix -dnl -dnl 98/05/20 Ralf Corsepius (corsepiu@faw.uni-ulm.de) -dnl Extracted from configure - -AC_DEFUN(RTEMS_TOOL_PREFIX, -[AC_REQUIRE([AC_CANONICAL_TARGET])dnl -AC_REQUIRE([AC_CANONICAL_BUILD])dnl - -changequote(,)dnl -if [ "${program_prefix}" = "NONE" ] ; then - if [ "${target}" = "${host}" ] ; then - program_prefix= - else - program_prefix=${target}- - fi -fi -changequote([,])dnl -]) - -dnl -dnl $Id$ -dnl -dnl Check whether the target compiler accepts -specs -dnl -dnl 98/02/11 Ralf Corsepius corsepiu@faw.uni-ulm.de -dnl - -AC_DEFUN(RTEMS_GCC_SPECS, -[AC_REQUIRE([RTEMS_PROG_CC]) -AC_CACHE_CHECK(whether $CC_FOR_TARGET accepts -specs,rtems_cv_gcc_specs, -[ -rtems_cv_gcc_specs=no -if test "$rtems_cv_prog_gcc" = "yes"; then - touch confspec - echo 'void f(){}' >conftest.c - if test -z "`${CC_FOR_TARGET} -specs confspec -c conftest.c 2>&1`";then - rtems_cv_gcc_specs=yes - fi -fi -rm -f confspec conftest* -])]) - -dnl -dnl $Id$ -dnl -dnl Check whether the target compiler accepts -pipe -dnl -dnl 98/02/11 Ralf Corsepius corsepiu@faw.uni-ulm.de -dnl - -AC_DEFUN(RTEMS_GCC_PIPE, -[AC_REQUIRE([RTEMS_PROG_CC]) -AC_REQUIRE([AC_CANONICAL_HOST]) -AC_CACHE_CHECK(whether $CC_FOR_TARGET accepts --pipe,rtems_cv_gcc_pipe, -[ -rtems_cv_gcc_pipe=no -if test "$rtems_cv_prog_gcc" = "yes"; then -case "$host_os" in - cygwin*) - ;; - *) - echo 'void f(){}' >conftest.c - if test -z "`${CC_FOR_TARGET} --pipe -c conftest.c 2>&1`";then - rtems_cv_gcc_pipe=yes - fi - rm -f conftest* - ;; -esac -fi -]) -]) - -dnl dnl $Id$ dnl dnl Set target tools @@ -683,109 +733,78 @@ fi ]) -dnl $Id$ - -dnl Report all available bsps for a target, -dnl check if a bsp-subdirectory is present for all bsps found dnl -dnl RTEMS_CHECK_BSPS(bsp_list) -AC_DEFUN(RTEMS_CHECK_BSPS, -[ -AC_REQUIRE([RTEMS_CHECK_CPU])dnl sets RTEMS_CPU, target -AC_REQUIRE([RTEMS_TOP])dnl sets RTEMS_TOPdir -AC_MSG_CHECKING([for bsps]) -case "${target}" in -changequote(,)dnl - i[3456]86-go32-rtems*) -changequote([,])dnl - $1="go32 go32_p5" - ;; - *) - files=`ls $srcdir/$RTEMS_TOPdir/c/src/lib/libbsp/$RTEMS_CPU` - for file in $files; do - case $file in - shared*);; - Makefile*);; - READ*);; - CVS*);; - pxfl*);; - go32*);; # so the i386 port can pick up the other Makefiles - # Now account for BSPs with build variants - gen68360) rtems_bsp="$rtems_bsp gen68360 gen68360_040";; - p4000) rtems_bsp="$rtems_bsp p4600 p4650";; - mvme162) rtems_bsp="$rtems_bsp mvme162 mvme162lx";; - *) $1="[$]$1 $file";; - esac; - done - ;; -esac -AC_MSG_RESULT([[$]$1 .. done]) -])dnl +dnl $Id$ +dnl +dnl Set program_prefix +dnl +dnl 98/05/20 Ralf Corsepius (corsepiu@faw.uni-ulm.de) +dnl Extracted from configure -AC_DEFUN(RTEMS_CHECK_CUSTOM_BSP, -[dnl -AC_MSG_CHECKING([for make/custom/[$]$1.cfg]) -if test -r "$srcdir/$RTEMS_TOPdir/make/custom/[$]$1.cfg"; then - AC_MSG_RESULT([yes]) -else - AC_MSG_ERROR([no]) +AC_DEFUN(RTEMS_TOOL_PREFIX, +[AC_REQUIRE([AC_CANONICAL_TARGET])dnl +AC_REQUIRE([AC_CANONICAL_BUILD])dnl + +changequote(,)dnl +if [ "${program_prefix}" = "NONE" ] ; then + if [ "${target}" = "${host}" ] ; then + program_prefix= + else + program_prefix=${target}- + fi fi -])dnl +changequote([,])dnl +]) dnl dnl $Id$ dnl +dnl Check whether the target compiler accepts -specs +dnl -AC_DEFUN(RTEMS_CHECK_MULTIPROCESSING, -[dnl -AC_REQUIRE([RTEMS_TOP])dnl -AC_REQUIRE([RTEMS_CHECK_CPU])dnl -AC_CACHE_CHECK([whether BSP supports multiprocessing], - rtems_cv_HAS_MP, - [dnl - if test -d "$srcdir/${RTEMS_TOPdir}/c/src/lib/libbsp/${RTEMS_CPU}/${$1}/shmsupp"; then - if test "$RTEMS_HAS_MULTIPROCESSING" = "yes"; then - rtems_cv_HAS_MP="yes" ; - else - rtems_cv_HAS_MP="disabled"; - fi - else - rtems_cv_HAS_MP="no"; - fi]) -if test "$rtems_cv_HAS_MP" = "yes"; then -HAS_MP="yes" -else -HAS_MP="no" +AC_DEFUN(RTEMS_GCC_SPECS, +[AC_REQUIRE([RTEMS_PROG_CC]) +AC_CACHE_CHECK(whether $CC_FOR_TARGET accepts -specs,rtems_cv_gcc_specs, +[ +rtems_cv_gcc_specs=no +if test "$rtems_cv_prog_gcc" = "yes"; then + touch confspec + echo 'void f(){}' >conftest.c + if test -z "`${CC_FOR_TARGET} -specs confspec -c conftest.c 2>&1`";then + rtems_cv_gcc_specs=yes + fi fi -AC_SUBST(HAS_MP) -]) +rm -f confspec conftest* +])]) +dnl dnl $Id$ dnl -AC_DEFUN(RTEMS_CHECK_POSIX_API, -[dnl -AC_REQUIRE([RTEMS_CHECK_CPU])dnl -AC_CACHE_CHECK([whether BSP supports libposix], - rtems_cv_HAS_POSIX_API, - [dnl - case "$RTEMS_CPU" in - unix*) - rtems_cv_HAS_POSIX_API="no" - ;; - *) - if test "${RTEMS_HAS_POSIX_API}" = "yes"; then - rtems_cv_HAS_POSIX_API="yes"; - else - rtems_cv_HAS_POSIX_API="disabled"; - fi - ;; - esac]) -if test "$rtems_cv_HAS_POSIX_API" = "yes"; then - HAS_POSIX_API="yes"; -else - HAS_POSIX_API="no"; +dnl Check whether the target compiler accepts -pipe +dnl +dnl 98/02/11 Ralf Corsepius corsepiu@faw.uni-ulm.de +dnl + +AC_DEFUN(RTEMS_GCC_PIPE, +[AC_REQUIRE([RTEMS_PROG_CC]) +AC_REQUIRE([AC_CANONICAL_HOST]) +AC_CACHE_CHECK(whether $CC_FOR_TARGET accepts --pipe,rtems_cv_gcc_pipe, +[ +rtems_cv_gcc_pipe=no +if test "$rtems_cv_prog_gcc" = "yes"; then +case "$host_os" in + cygwin*) + ;; + *) + echo 'void f(){}' >conftest.c + if test -z "`${CC_FOR_TARGET} --pipe -c conftest.c 2>&1`";then + rtems_cv_gcc_pipe=yes + fi + rm -f conftest* + ;; +esac fi -AC_SUBST(HAS_POSIX_API)dnl +]) ]) dnl $Id$ diff --git a/c/src/exec/posix/configure b/c/src/exec/posix/configure index 20947a63cb..b8e44d2678 100644 --- a/c/src/exec/posix/configure +++ b/c/src/exec/posix/configure @@ -533,6 +533,7 @@ else fi + # Check whether --with-target-subdir or --without-target-subdir was given. if test "${with_target_subdir+set}" = set; then withval="$with_target_subdir" @@ -546,7 +547,7 @@ RTEMS_TOPdir="../../../.."; echo $ac_n "checking for RTEMS Version""... $ac_c" 1>&6 -echo "configure:550: checking for RTEMS Version" >&5 +echo "configure:551: checking for RTEMS Version" >&5 if test -r "${srcdir}/${RTEMS_TOPdir}/VERSION"; then RTEMS_VERSION=`grep Version ${srcdir}/${RTEMS_TOPdir}/VERSION | \ sed -e 's%RTEMS[ ]*Version[ ]*\(.*\)[ ]*%\1%g'` @@ -607,7 +608,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } fi echo $ac_n "checking host system type""... $ac_c" 1>&6 -echo "configure:611: checking host system type" >&5 +echo "configure:612: checking host system type" >&5 host_alias=$host case "$host_alias" in @@ -628,7 +629,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$host" 1>&6 echo $ac_n "checking target system type""... $ac_c" 1>&6 -echo "configure:632: checking target system type" >&5 +echo "configure:633: checking target system type" >&5 target_alias=$target case "$target_alias" in @@ -646,7 +647,7 @@ target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$target" 1>&6 echo $ac_n "checking build system type""... $ac_c" 1>&6 -echo "configure:650: checking build system type" >&5 +echo "configure:651: checking build system type" >&5 build_alias=$build case "$build_alias" in @@ -669,7 +670,7 @@ test "$host_alias" != "$target_alias" && program_prefix=${target_alias}- echo $ac_n "checking rtems target cpu""... $ac_c" 1>&6 -echo "configure:673: checking rtems target cpu" >&5 +echo "configure:674: checking rtems target cpu" >&5 case "${target}" in # hpux unix port should go here i[3456]86-go32-rtems*) @@ -707,7 +708,7 @@ echo "$ac_t""$RTEMS_CPU" 1>&6 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:711: checking for a BSD compatible install" >&5 +echo "configure:712: checking for a BSD compatible install" >&5 if test -z "$INSTALL"; then if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -760,7 +761,7 @@ test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6 -echo "configure:764: checking whether build environment is sane" >&5 +echo "configure:765: checking whether build environment is sane" >&5 # Just in case sleep 1 echo timestamp > conftestfile @@ -817,7 +818,7 @@ test "$program_suffix" != NONE && test "$program_transform_name" = "" && program_transform_name="s,x,x," echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 -echo "configure:821: checking whether ${MAKE-make} sets \${MAKE}" >&5 +echo "configure:822: checking whether ${MAKE-make} sets \${MAKE}" >&5 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -857,7 +858,7 @@ fi missing_dir=`cd $ac_aux_dir && pwd` echo $ac_n "checking for working aclocal""... $ac_c" 1>&6 -echo "configure:861: checking for working aclocal" >&5 +echo "configure:862: checking for working aclocal" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -870,7 +871,7 @@ else fi echo $ac_n "checking for working autoconf""... $ac_c" 1>&6 -echo "configure:874: checking for working autoconf" >&5 +echo "configure:875: checking for working autoconf" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -883,7 +884,7 @@ else fi echo $ac_n "checking for working automake""... $ac_c" 1>&6 -echo "configure:887: checking for working automake" >&5 +echo "configure:888: checking for working automake" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -896,7 +897,7 @@ else fi echo $ac_n "checking for working autoheader""... $ac_c" 1>&6 -echo "configure:900: checking for working autoheader" >&5 +echo "configure:901: checking for working autoheader" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -909,7 +910,7 @@ else fi echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6 -echo "configure:913: checking for working makeinfo" >&5 +echo "configure:914: checking for working makeinfo" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -923,7 +924,7 @@ fi echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6 -echo "configure:927: checking whether to enable maintainer-specific portions of Makefiles" >&5 +echo "configure:928: checking whether to enable maintainer-specific portions of Makefiles" >&5 # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given. if test "${enable_maintainer_mode+set}" = set; then enableval="$enable_maintainer_mode" @@ -961,6 +962,7 @@ fi + # Check whether --enable-posix or --disable-posix was given. if test "${enable_posix+set}" = set; then enableval="$enable_posix" @@ -1011,8 +1013,9 @@ fi + echo $ac_n "checking for RTEMS_BSP""... $ac_c" 1>&6 -echo "configure:1016: checking for RTEMS_BSP" >&5 +echo "configure:1019: checking for RTEMS_BSP" >&5 if eval "test \"`echo '$''{'rtems_cv_RTEMS_BSP'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1029,9 +1032,10 @@ echo "$ac_t""${RTEMS_BSP}" 1>&6 + # Is this a supported CPU? echo $ac_n "checking if cpu $RTEMS_CPU is supported""... $ac_c" 1>&6 -echo "configure:1035: checking if cpu $RTEMS_CPU is supported" >&5 +echo "configure:1039: checking if cpu $RTEMS_CPU is supported" >&5 if test -d "$srcdir/$RTEMS_TOPdir/c/src/exec/score/cpu/$RTEMS_CPU"; then echo "$ac_t""yes" 1>&6 else @@ -1082,7 +1086,7 @@ do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1086: checking for $ac_word" >&5 +echo "configure:1090: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_KSH'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1141,7 +1145,7 @@ do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1145: checking for $ac_word" >&5 +echo "configure:1149: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_CC_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1185,7 +1189,7 @@ rtems_save_CFLAGS=$CFLAGS CC=$CC_FOR_TARGET echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:1189: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 +echo "configure:1193: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. @@ -1196,12 +1200,12 @@ cross_compiling=$ac_cv_prog_cc_cross cat > conftest.$ac_ext << EOF -#line 1200 "configure" +#line 1204 "configure" #include "confdefs.h" main(){return(0);} EOF -if { (eval echo configure:1205: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1209: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then ac_cv_prog_cc_works=yes # If we can't run a trivial program, we are probably using a cross compiler. if (./conftest; exit) 2>/dev/null; then @@ -1227,12 +1231,12 @@ if test $ac_cv_prog_cc_works = no; then { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:1231: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 +echo "configure:1235: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 cross_compiling=$ac_cv_prog_cc_cross echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:1236: checking whether we are using GNU C" >&5 +echo "configure:1240: checking whether we are using GNU C" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1241,7 +1245,7 @@ else yes; #endif EOF -if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1245: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then +if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1249: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gcc=yes else ac_cv_prog_gcc=no @@ -1256,7 +1260,7 @@ if test $ac_cv_prog_gcc = yes; then ac_save_CFLAGS="$CFLAGS" CFLAGS= echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:1260: checking whether ${CC-cc} accepts -g" >&5 +echo "configure:1264: checking whether ${CC-cc} accepts -g" >&5 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1298,7 +1302,7 @@ unset ac_cv_prog_cc_cross echo $ac_n "checking whether $CC_FOR_TARGET accepts -specs""... $ac_c" 1>&6 -echo "configure:1302: checking whether $CC_FOR_TARGET accepts -specs" >&5 +echo "configure:1306: checking whether $CC_FOR_TARGET accepts -specs" >&5 if eval "test \"`echo '$''{'rtems_cv_gcc_specs'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1319,7 +1323,7 @@ echo "$ac_t""$rtems_cv_gcc_specs" 1>&6 echo $ac_n "checking whether $CC_FOR_TARGET accepts --pipe""... $ac_c" 1>&6 -echo "configure:1323: checking whether $CC_FOR_TARGET accepts --pipe" >&5 +echo "configure:1327: checking whether $CC_FOR_TARGET accepts --pipe" >&5 if eval "test \"`echo '$''{'rtems_cv_gcc_pipe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1360,7 +1364,7 @@ esac echo $ac_n "checking target's ar""... $ac_c" 1>&6 -echo "configure:1364: checking target's ar" >&5 +echo "configure:1368: checking target's ar" >&5 if eval "test \"`echo '$''{'ac_cv_path_AR_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1393,7 +1397,7 @@ else # will override the environment variable, which isn't what the user # intends echo $ac_n "checking whether environment variable AR_FOR_TARGET is an absolute path""... $ac_c" 1>&6 -echo "configure:1397: checking whether environment variable AR_FOR_TARGET is an absolute path" >&5 +echo "configure:1401: checking whether environment variable AR_FOR_TARGET is an absolute path" >&5 case "$AR_FOR_TARGET" in /*) # valid echo "$ac_t"""yes"" 1>&6 @@ -1410,7 +1414,7 @@ echo "configure:1397: checking whether environment variable AR_FOR_TARGET is an # Extract the first word of ""$program_prefix"ar", so it can be a program name with args. set dummy "$program_prefix"ar; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1414: checking for $ac_word" >&5 +echo "configure:1418: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_AR_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1447,7 +1451,7 @@ fi echo $ac_n "checking target's as""... $ac_c" 1>&6 -echo "configure:1451: checking target's as" >&5 +echo "configure:1455: checking target's as" >&5 if eval "test \"`echo '$''{'ac_cv_path_AS_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1480,7 +1484,7 @@ else # will override the environment variable, which isn't what the user # intends echo $ac_n "checking whether environment variable AS_FOR_TARGET is an absolute path""... $ac_c" 1>&6 -echo "configure:1484: checking whether environment variable AS_FOR_TARGET is an absolute path" >&5 +echo "configure:1488: checking whether environment variable AS_FOR_TARGET is an absolute path" >&5 case "$AS_FOR_TARGET" in /*) # valid echo "$ac_t"""yes"" 1>&6 @@ -1497,7 +1501,7 @@ echo "configure:1484: checking whether environment variable AS_FOR_TARGET is an # Extract the first word of ""$program_prefix"as", so it can be a program name with args. set dummy "$program_prefix"as; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1501: checking for $ac_word" >&5 +echo "configure:1505: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_AS_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1534,7 +1538,7 @@ fi echo $ac_n "checking target's ld""... $ac_c" 1>&6 -echo "configure:1538: checking target's ld" >&5 +echo "configure:1542: checking target's ld" >&5 if eval "test \"`echo '$''{'ac_cv_path_LD_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1567,7 +1571,7 @@ else # will override the environment variable, which isn't what the user # intends echo $ac_n "checking whether environment variable LD_FOR_TARGET is an absolute path""... $ac_c" 1>&6 -echo "configure:1571: checking whether environment variable LD_FOR_TARGET is an absolute path" >&5 +echo "configure:1575: checking whether environment variable LD_FOR_TARGET is an absolute path" >&5 case "$LD_FOR_TARGET" in /*) # valid echo "$ac_t"""yes"" 1>&6 @@ -1584,7 +1588,7 @@ echo "configure:1571: checking whether environment variable LD_FOR_TARGET is an # Extract the first word of ""$program_prefix"ld", so it can be a program name with args. set dummy "$program_prefix"ld; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1588: checking for $ac_word" >&5 +echo "configure:1592: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_LD_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1621,7 +1625,7 @@ fi echo $ac_n "checking target's nm""... $ac_c" 1>&6 -echo "configure:1625: checking target's nm" >&5 +echo "configure:1629: checking target's nm" >&5 if eval "test \"`echo '$''{'ac_cv_path_NM_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1654,7 +1658,7 @@ else # will override the environment variable, which isn't what the user # intends echo $ac_n "checking whether environment variable NM_FOR_TARGET is an absolute path""... $ac_c" 1>&6 -echo "configure:1658: checking whether environment variable NM_FOR_TARGET is an absolute path" >&5 +echo "configure:1662: checking whether environment variable NM_FOR_TARGET is an absolute path" >&5 case "$NM_FOR_TARGET" in /*) # valid echo "$ac_t"""yes"" 1>&6 @@ -1671,7 +1675,7 @@ echo "configure:1658: checking whether environment variable NM_FOR_TARGET is an # Extract the first word of ""$program_prefix"nm", so it can be a program name with args. set dummy "$program_prefix"nm; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1675: checking for $ac_word" >&5 +echo "configure:1679: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_NM_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1709,7 +1713,7 @@ fi echo $ac_n "checking target's ranlib""... $ac_c" 1>&6 -echo "configure:1713: checking target's ranlib" >&5 +echo "configure:1717: checking target's ranlib" >&5 if eval "test \"`echo '$''{'ac_cv_path_RANLIB_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1742,7 +1746,7 @@ else # will override the environment variable, which isn't what the user # intends echo $ac_n "checking whether environment variable RANLIB_FOR_TARGET is an absolute path""... $ac_c" 1>&6 -echo "configure:1746: checking whether environment variable RANLIB_FOR_TARGET is an absolute path" >&5 +echo "configure:1750: checking whether environment variable RANLIB_FOR_TARGET is an absolute path" >&5 case "$RANLIB_FOR_TARGET" in /*) # valid echo "$ac_t"""yes"" 1>&6 @@ -1759,7 +1763,7 @@ echo "configure:1746: checking whether environment variable RANLIB_FOR_TARGET is # Extract the first word of ""$program_prefix"ranlib", so it can be a program name with args. set dummy "$program_prefix"ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1763: checking for $ac_word" >&5 +echo "configure:1767: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_RANLIB_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1798,7 +1802,7 @@ fi # ranlib wasn't found; check if ar -s is available echo $ac_n "checking whether $AR_FOR_TARGET -s works""... $ac_c" 1>&6 -echo "configure:1802: checking whether $AR_FOR_TARGET -s works" >&5 +echo "configure:1806: checking whether $AR_FOR_TARGET -s works" >&5 if eval "test \"`echo '$''{'rtems_cv_AR_FOR_TARGET_S'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1807,8 +1811,8 @@ cat > conftest.$ac_ext <<EOF int foo( int b ) { return b; } EOF -if { ac_try='$CC_FOR_TARGET -o conftest.o -c conftest.$ac_ext'; { (eval echo configure:1811: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } \ - && { ac_try='$AR_FOR_TARGET -sr conftest.a conftest.o'; { (eval echo configure:1812: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } \ +if { ac_try='$CC_FOR_TARGET -o conftest.o -c conftest.$ac_ext'; { (eval echo configure:1815: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } \ + && { ac_try='$AR_FOR_TARGET -sr conftest.a conftest.o'; { (eval echo configure:1816: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } \ && test -s conftest.a ; \ then rtems_cv_AR_FOR_TARGET_S="yes" @@ -1833,7 +1837,7 @@ echo "$ac_t""$rtems_cv_AR_FOR_TARGET_S" 1>&6 echo $ac_n "checking target's objcopy""... $ac_c" 1>&6 -echo "configure:1837: checking target's objcopy" >&5 +echo "configure:1841: checking target's objcopy" >&5 if eval "test \"`echo '$''{'ac_cv_path_OBJCOPY_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1866,7 +1870,7 @@ else # will override the environment variable, which isn't what the user # intends echo $ac_n "checking whether environment variable OBJCOPY_FOR_TARGET is an absolute path""... $ac_c" 1>&6 -echo "configure:1870: checking whether environment variable OBJCOPY_FOR_TARGET is an absolute path" >&5 +echo "configure:1874: checking whether environment variable OBJCOPY_FOR_TARGET is an absolute path" >&5 case "$OBJCOPY_FOR_TARGET" in /*) # valid echo "$ac_t"""yes"" 1>&6 @@ -1883,7 +1887,7 @@ echo "configure:1870: checking whether environment variable OBJCOPY_FOR_TARGET i # Extract the first word of ""$program_prefix"objcopy", so it can be a program name with args. set dummy "$program_prefix"objcopy; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1887: checking for $ac_word" >&5 +echo "configure:1891: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_OBJCOPY_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1920,7 +1924,7 @@ fi echo $ac_n "checking target's size""... $ac_c" 1>&6 -echo "configure:1924: checking target's size" >&5 +echo "configure:1928: checking target's size" >&5 if eval "test \"`echo '$''{'ac_cv_path_SIZE_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1953,7 +1957,7 @@ else # will override the environment variable, which isn't what the user # intends echo $ac_n "checking whether environment variable SIZE_FOR_TARGET is an absolute path""... $ac_c" 1>&6 -echo "configure:1957: checking whether environment variable SIZE_FOR_TARGET is an absolute path" >&5 +echo "configure:1961: checking whether environment variable SIZE_FOR_TARGET is an absolute path" >&5 case "$SIZE_FOR_TARGET" in /*) # valid echo "$ac_t"""yes"" 1>&6 @@ -1970,7 +1974,7 @@ echo "configure:1957: checking whether environment variable SIZE_FOR_TARGET is a # Extract the first word of ""$program_prefix"size", so it can be a program name with args. set dummy "$program_prefix"size; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1974: checking for $ac_word" >&5 +echo "configure:1978: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_SIZE_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2007,7 +2011,7 @@ fi echo $ac_n "checking target's strip""... $ac_c" 1>&6 -echo "configure:2011: checking target's strip" >&5 +echo "configure:2015: checking target's strip" >&5 if eval "test \"`echo '$''{'ac_cv_path_STRIP_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2040,7 +2044,7 @@ else # will override the environment variable, which isn't what the user # intends echo $ac_n "checking whether environment variable STRIP_FOR_TARGET is an absolute path""... $ac_c" 1>&6 -echo "configure:2044: checking whether environment variable STRIP_FOR_TARGET is an absolute path" >&5 +echo "configure:2048: checking whether environment variable STRIP_FOR_TARGET is an absolute path" >&5 case "$STRIP_FOR_TARGET" in /*) # valid echo "$ac_t"""yes"" 1>&6 @@ -2057,7 +2061,7 @@ echo "configure:2044: checking whether environment variable STRIP_FOR_TARGET is # Extract the first word of ""$program_prefix"strip", so it can be a program name with args. set dummy "$program_prefix"strip; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2061: checking for $ac_word" >&5 +echo "configure:2065: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_STRIP_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2095,16 +2099,19 @@ fi # Check if there is custom/*.cfg for this BSP + + echo $ac_n "checking for make/custom/$RTEMS_BSP.cfg""... $ac_c" 1>&6 -echo "configure:2100: checking for make/custom/$RTEMS_BSP.cfg" >&5 +echo "configure:2106: checking for make/custom/$RTEMS_BSP.cfg" >&5 if test -r "$srcdir/$RTEMS_TOPdir/make/custom/$RTEMS_BSP.cfg"; then echo "$ac_t""yes" 1>&6 else { echo "configure: error: no" 1>&2; exit 1; } fi + echo $ac_n "checking whether BSP supports multiprocessing""... $ac_c" 1>&6 -echo "configure:2108: checking whether BSP supports multiprocessing" >&5 +echo "configure:2115: checking whether BSP supports multiprocessing" >&5 if eval "test \"`echo '$''{'rtems_cv_HAS_MP'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2127,8 +2134,9 @@ HAS_MP="no" fi + echo $ac_n "checking whether BSP supports libposix""... $ac_c" 1>&6 -echo "configure:2132: checking whether BSP supports libposix" >&5 +echo "configure:2140: checking whether BSP supports libposix" >&5 if eval "test \"`echo '$''{'rtems_cv_HAS_POSIX_API'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2185,7 +2193,7 @@ fi ## Needed when using automake for libs/rels echo $ac_n "checking for newlib""... $ac_c" 1>&6 -echo "configure:2189: checking for newlib" >&5 +echo "configure:2197: checking for newlib" >&5 if eval "test \"`echo '$''{'rtems_cv_use_newlib'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2194,14 +2202,14 @@ else CC=$CC_FOR_TARGET cat > conftest.$ac_ext <<EOF -#line 2198 "configure" +#line 2206 "configure" #include "confdefs.h" extern int not_required_by_rtems() ; int main() { not_required_by_rtems() ; return 0; } EOF -if { (eval echo configure:2205: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2213: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* rtems_cv_use_newlib="yes" else @@ -2212,14 +2220,14 @@ rm -f conftest* if test -z "$rtems_cv_use_newlib"; then cat > conftest.$ac_ext <<EOF -#line 2216 "configure" +#line 2224 "configure" #include "confdefs.h" extern int rtems_provides_crt0 ; int main() { rtems_provides_crt0 = 0 ; return 0; } EOF -if { (eval echo configure:2223: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2231: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* rtems_cv_use_newlib="yes" else |