diff options
Diffstat (limited to '')
-rw-r--r-- | c/src/exec/libnetworking/rtems/rtems_bsdnet.h | 184 |
1 files changed, 0 insertions, 184 deletions
diff --git a/c/src/exec/libnetworking/rtems/rtems_bsdnet.h b/c/src/exec/libnetworking/rtems/rtems_bsdnet.h deleted file mode 100644 index 0e9837ea8d..0000000000 --- a/c/src/exec/libnetworking/rtems/rtems_bsdnet.h +++ /dev/null @@ -1,184 +0,0 @@ -/* - * $Id$ - */ - -#ifndef _RTEMS_BSDNET_ -#define _RTEMS_BSDNET_ - -#include <rtems.h> - -/* - * If this file is included from inside the Network Stack proper or - * a device driver, then __INSIDE_RTEMS_BSD_TCPIP_STACK__ should be - * defined. This triggers a number of internally used definitions. - */ - -#if defined(__INSIDE_RTEMS_BSD_TCPIP_STACK__) -#undef _COMPILING_BSD_KERNEL_ -#undef KERNEL -#undef INET -#undef NFS -#undef DIAGNOSTIC -#undef BOOTP_COMPAT - -#define _COMPILING_BSD_KERNEL_ -#define KERNEL -#define INET -#define NFS -#define DIAGNOSTIC -#define BOOTP_COMPAT -#endif - -/* - * Values that may be obtained by BOOTP - */ -extern struct in_addr rtems_bsdnet_bootp_server_address; -extern char *rtems_bsdnet_bootp_server_name; -extern char *rtems_bsdnet_bootp_boot_file_name; -extern struct in_addr rtems_bsdnet_ntpserver[]; -extern int rtems_bsdnet_ntpserver_count; -extern long rtems_bsdnet_timeoffset; - -/* - * Manipulate routing tables - */ -struct sockaddr; -struct rtentry; -int rtems_bsdnet_rtrequest ( - int req, - struct sockaddr *dst, - struct sockaddr *gateway, - struct sockaddr *netmask, - int flags, - struct rtentry **net_nrt); - -/* - * Diagnostics - */ -void rtems_bsdnet_show_inet_routes (void); -void rtems_bsdnet_show_mbuf_stats (void); -void rtems_bsdnet_show_if_stats (void); -void rtems_bsdnet_show_ip_stats (void); -void rtems_bsdnet_show_icmp_stats (void); -void rtems_bsdnet_show_udp_stats (void); -void rtems_bsdnet_show_tcp_stats (void); - -/* - * Network configuration - */ -struct rtems_bsdnet_ifconfig { - /* - * These three entries must be supplied for each interface. - */ - char *name; - - /* - * This function now handles attaching and detaching an interface. - * The parameter attaching indicates the operation being invoked. - * For older attach functions which do not have the extra parameter - * it will be ignored. - */ - int (*attach)(struct rtems_bsdnet_ifconfig *conf, int attaching); - - /* - * Link to next interface - */ - struct rtems_bsdnet_ifconfig *next; - - /* - * The following entries may be obtained - * from BOOTP or explicitily supplied. - */ - char *ip_address; - char *ip_netmask; - void *hardware_address; - - /* - * The driver assigns defaults values to the following - * entries if they are not explicitly supplied. - */ - int ignore_broadcast; - int mtu; - int rbuf_count; - int xbuf_count; - - /* - * For external ethernet controller board the following - * parameters are needed - */ - unsigned int port; /* port of the board */ - unsigned int irno; /* irq of the board */ - unsigned int bpar; /* memory of the board */ - - /* - * Driver control block pointer. Typcially this points to the driver's - * controlling structure. You set this when you have the structure allocated - * externally to the driver. - */ - void *drv_ctrl; - -}; - -struct rtems_bsdnet_config { - /* - * This entry points to the head of the ifconfig chain. - */ - struct rtems_bsdnet_ifconfig *ifconfig; - - /* - * This entry should be rtems_bsdnet_do_bootp if BOOTP - * is being used to configure the network, and NULL - * if BOOTP is not being used. - */ - void (*bootp)(void); - - /* - * The remaining items can be initialized to 0, in - * which case the default value will be used. - */ - rtems_task_priority network_task_priority; /* 100 */ - unsigned long mbuf_bytecount; /* 64 kbytes */ - unsigned long mbuf_cluster_bytecount; /* 128 kbytes */ - char *hostname; /* BOOTP */ - char *domainname; /* BOOTP */ - char *gateway; /* BOOTP */ - char *log_host; /* BOOTP */ - char *name_server[3]; /* BOOTP */ - char *ntp_server[3]; /* BOOTP */ -}; - -/* - * Default global device configuration structure. This is scanned - * by the initialize network function. Check the network demo's for - * an example of the structure. Like the RTEMS configuration tables, - * they are not part of RTEMS but part of your application or bsp - * code. - */ -extern struct rtems_bsdnet_config rtems_bsdnet_config; - -/* - * Initialise the BSD stack, attach and `up' interfaces - * in the `rtems_bsdnet_config'. RTEMS must already be initialised. - */ -int rtems_bsdnet_initialize_network (void); - -/* - * Dynamic interface control. Drivers must free any resources such as - * memory, interrupts, io regions claimed during the `attach' and/or - * `up' operations when asked to `detach'. - * You must configure the interface after attaching it. - */ -void rtems_bsdnet_attach (struct rtems_bsdnet_ifconfig *ifconfig); -void rtems_bsdnet_detach (struct rtems_bsdnet_ifconfig *ifconfig); - -/* - * Interface configuration. The commands are listed in `sys/sockio.h'. - */ -int rtems_bsdnet_ifconfig (const char *ifname, unsigned32 cmd, void *param); - -void rtems_bsdnet_do_bootp (void); -void rtems_bsdnet_do_bootp_and_rootfs (void); - -int rtems_bsdnet_synchronize_ntp (int interval, rtems_task_priority priority); - -#endif /* _RTEMS_BSDNET_ */ |