1 files changed, 0 insertions, 96 deletions
diff --git a/bsps/powerpc/haleakala/irq/irq_init.c b/bsps/powerpc/haleakala/irq/irq_init.c
deleted file mode 100644
index d48855a979..0000000000
--- a/bsps/powerpc/haleakala/irq/irq_init.c
+++ /dev/null
@@ -1,96 +0,0 @@
-/*===============================================================*\
-| Project: RTEMS Haleakala BSP                                    |
-|  *  by Michael Hamel ADInstruments Ltd 2008                     |
-+-----------------------------------------------------------------+
-| The license and distribution terms for this file may be         |
-| found in the file LICENSE in this distribution or at            |
-|                                                                 |
-| http://www.rtems.org/license/LICENSE.                           |
-|                                                                 |
-+-----------------------------------------------------------------+
-| this file contains the irq controller handler                   |
-\*===============================================================*/
-#include <libcpu/spr.h>
-#include <bsp/irq.h>
-#include <bsp.h>
-#include <bsp/vectors.h>
-#include <rtems/bspIo.h>
-#include <rtems/powerpc/powerpc.h>
-
-
-/*
- * default on/off function
- */
-static void nop_func(void)
-{
-}
-
-/*
- * default isOn function
- */
-static int not_connected(void)
-{
-	return 0;
-}
-
-static rtems_irq_connect_data      rtemsIrq[BSP_IRQ_NUMBER];
-static rtems_irq_global_settings   initial_config;
-static rtems_irq_connect_data      defaultIrq = {
-  .name   = 0,
-  .hdl    = NULL,
-  .handle = NULL,
-  .on     = (rtems_irq_enable) nop_func,
-  .off    = (rtems_irq_disable) nop_func,
-  .isOn   = (rtems_irq_is_enabled) not_connected,
-#ifdef BSP_SHARED_HANDLER_SUPPORT
-  .next_handler = NULL
-#endif
-};
-
-static rtems_irq_prio irqPrioTable[BSP_IRQ_NUMBER]={
-  /*
-   * Processor exceptions handled as interrupts
-   */
-  0
-};
-
-  /*
-   * This code assumes the exceptions management setup has already
-   * been done. We just need to replace the exceptions that will
-   * be handled like interrupt. On mcp750/mpc750 and many PPC processors
-   * this means the decrementer exception and the external exception.
-   */
-
-void BSP_rtems_irq_mng_init(unsigned cpuId)
-{
-  int i;
-
-  /*
-   * re-init the rtemsIrq table
-   */
-  for (i = 0; i < BSP_IRQ_NUMBER; i++) {
-    rtemsIrq[i]      = defaultIrq;
-    rtemsIrq[i].name = i;
-  }
-  /*
-   * Init initial Interrupt management config
-   */
-  initial_config.irqNb        = BSP_IRQ_NUMBER;
-  initial_config.defaultEntry = defaultIrq;
-  initial_config.irqHdlTbl    = rtemsIrq;
-  initial_config.irqBase      = BSP_LOWEST_OFFSET;
-  initial_config.irqPrioTbl   = irqPrioTable;
-
-  if (!BSP_rtems_irq_mngt_set(&initial_config)) {
-    /*
-     * put something here that will show the failure...
-     */
-    rtems_panic(
-      "Unable to initialize RTEMS interrupt management!!! System locked\n"
-    );
-  }
-
-  #ifdef TRACE_IRQ_INIT
-    printk("RTEMS IRQ management is now operational\n");
-  #endif
-}