diff options
Diffstat (limited to 'bsps/powerpc/gen5200/start/bspstart.c')
| -rw-r--r-- | bsps/powerpc/gen5200/start/bspstart.c | 141 |
1 files changed, 46 insertions, 95 deletions
diff --git a/bsps/powerpc/gen5200/start/bspstart.c b/bsps/powerpc/gen5200/start/bspstart.c index e52119fe67..899e21524a 100644 --- a/bsps/powerpc/gen5200/start/bspstart.c +++ b/bsps/powerpc/gen5200/start/bspstart.c @@ -1,98 +1,49 @@ -/*===============================================================*\ -| Project: RTEMS generic MPC5200 BSP | -+-----------------------------------------------------------------+ -| Partially based on the code references which are named below. | -| Adaptions, modifications, enhancements and any recent parts of | -| the code are: | -| Copyright (c) 2005 | -| Embedded Brains GmbH | -| Obere Lagerstr. 30 | -| D-82178 Puchheim | -| Germany | -| rtems@embedded-brains.de | -+-----------------------------------------------------------------+ -| The license and distribution terms for this file may be | -| found in the file LICENSE in this distribution or at | -| | -| http://www.rtems.org/license/LICENSE. | -| | -+-----------------------------------------------------------------+ -| this file contains the BSP initialization code | -\*===============================================================*/ -/***********************************************************************/ -/* */ -/* Module: bspstart.c */ -/* Date: 07/17/2003 */ -/* Purpose: RTEMS MPC5x00 C level startup code */ -/* */ -/*---------------------------------------------------------------------*/ -/* */ -/* Description: This routine starts the application. It includes */ -/* application, board, and monitor specific */ -/* initialization and configuration. The generic CPU */ -/* dependent initialization has been performed before */ -/* this routine is invoked. */ -/* */ -/*---------------------------------------------------------------------*/ -/* */ -/* Code */ -/* References: MPC8260ads C level startup code */ -/* Module: bspstart.c */ -/* Project: RTEMS 4.6.0pre1 / MCF8260ads BSP */ -/* Version 1.2 */ -/* Date: 04/17/2002 */ -/* */ -/* Author(s) / Copyright(s): */ -/* */ -/* The MPC860 specific stuff was written by Jay Monkman */ -/* (jmonkman@frasca.com) */ -/* */ -/* Modified for the MPC8260ADS board by Andy Dachs */ -/* <a.dachs@sstl.co.uk> */ -/* Surrey Satellite Technology Limited, 2001 */ -/* A 40MHz system clock is assumed. */ -/* The PON. RST.CONF. Dip switches (DS1) are */ -/* 1 - Off */ -/* 2 - On */ -/* 3 - Off */ -/* 4 - On */ -/* 5 - Off */ -/* 6 - Off */ -/* 7 - Off */ -/* 8 - Off */ -/* Dip switches on DS2 and DS3 are all set to ON */ -/* The LEDs on the board are used to signal panic and fatal_error */ -/* conditions. */ -/* The mmu is unused at this time. */ -/* */ -/* COPYRIGHT (c) 1989-2007. */ -/* On-Line Applications Research Corporation (OAR). */ -/* */ -/* The license and distribution terms for this file may be */ -/* found in the file LICENSE in this distribution or at */ -/* http://www.rtems.org/license/LICENSE. */ -/* */ -/*---------------------------------------------------------------------*/ -/* */ -/* Partially based on the code references which are named above. */ -/* Adaptions, modifications, enhancements and any recent parts of */ -/* the code are under the right of */ -/* */ -/* IPR Engineering, Dachauer Straße 38, D-80335 München */ -/* Copyright(C) 2003 */ -/* */ -/*---------------------------------------------------------------------*/ -/* */ -/* IPR Engineering makes no representation or warranties with */ -/* respect to the performance of this computer program, and */ -/* specifically disclaims any responsibility for any damages, */ -/* special or consequential, connected with the use of this program. */ -/* */ -/*---------------------------------------------------------------------*/ -/* */ -/* Version history: 1.0 */ -/* */ -/***********************************************************************/ +/* + * RTEMS generic MPC5200 BSP + * + * This file contains the BSP initialization code + * + * This routine starts the application. It includes + * application, board, and monitor specific + * initialization and configuration. The generic CPU + * dependent initialization has been performed before + * this routine is invoked. + * + * The MPC860 specific stuff was written by Jay Monkman. + * Modified for the MPC8260ADS board by Andy Dachs. + * + * A 40MHz system clock is assumed. + * The PON. RST.CONF. Dip switches (DS1) are + * 1 - Off + * 2 - On + * 3 - Off + * 4 - On + * 5 - Off + * 6 - Off + * 7 - Off + * 8 - Off + * Dip switches on DS2 and DS3 are all set to ON + * The LEDs on the board are used to signal panic and fatal_error + * conditions. + * The mmu is unused at this time. + */ + +/* + * Copyright (c) 1989, 2007 On-Line Applications Research Corporation (OAR). + * + * Copyright (c) Jay Monkman (jmonkman@frasca.com) + * + * Copyright (c) 2001 Andy Dachs <a.dachs@sstl.co.uk> + * Surrey Satellite Technology Limited + * + * Copyright (c) 2003 IPR Engineering + * + * Copyright (c) 2005 embedded brains GmbH & Co. KG + * + * The license and distribution terms for this file may be + * found in the file LICENSE in this distribution or at + * http://www.rtems.org/license/LICENSE. + */ #include <rtems.h> #include <rtems/counter.h> |