diff options
Diffstat (limited to 'bsps/include/libchip/if_dcreg.h')
| -rw-r--r-- | bsps/include/libchip/if_dcreg.h | 1120 |
1 files changed, 1120 insertions, 0 deletions
diff --git a/bsps/include/libchip/if_dcreg.h b/bsps/include/libchip/if_dcreg.h new file mode 100644 index 0000000000..07395c1884 --- /dev/null +++ b/bsps/include/libchip/if_dcreg.h @@ -0,0 +1,1120 @@ +/* + * Copyright (c) 1997, 1998, 1999 + * Bill Paul <wpaul@ee.columbia.edu>. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * This product includes software developed by Bill Paul. + * 4. Neither the name of the author nor the names of any co-contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD + * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + * THE POSSIBILITY OF SUCH DAMAGE. + * + * $FreeBSD: src/sys/pci/if_dcreg.h,v 1.4.2.21 2003/02/12 22:19:34 mbr Exp $ + */ + +/* + * 21143 and clone common register definitions. + */ + +#define DC_BUSCTL 0x00 /* bus control */ +#define DC_TXSTART 0x08 /* tx start demand */ +#define DC_RXSTART 0x10 /* rx start demand */ +#define DC_RXADDR 0x18 /* rx descriptor list start addr */ +#define DC_TXADDR 0x20 /* tx descriptor list start addr */ +#define DC_ISR 0x28 /* interrupt status register */ +#define DC_NETCFG 0x30 /* network config register */ +#define DC_IMR 0x38 /* interrupt mask */ +#define DC_FRAMESDISCARDED 0x40 /* # of discarded frames */ +#define DC_SIO 0x48 /* MII and ROM/EEPROM access */ +#define DC_ROM 0x50 /* ROM programming address */ +#define DC_TIMER 0x58 /* general timer */ +#define DC_10BTSTAT 0x60 /* SIA status */ +#define DC_SIARESET 0x68 /* SIA connectivity */ +#define DC_10BTCTRL 0x70 /* SIA transmit and receive */ +#define DC_WATCHDOG 0x78 /* SIA and general purpose port */ + +/* + * There are two general 'types' of MX chips that we need to be + * concerned with. One is the original 98713, which has its internal + * NWAY support controlled via the MDIO bits in the serial I/O + * register. The other is everything else (from the 98713A on up), + * which has its internal NWAY controlled via CSR13, CSR14 and CSR15, + * just like the 21143. This type setting also governs which of the + * 'magic' numbers we write to CSR16. The PNIC II falls into the + * 98713A/98715/98715A/98725 category. + */ +#define DC_TYPE_98713 0x1 +#define DC_TYPE_98713A 0x2 +#define DC_TYPE_987x5 0x3 + +/* Other type of supported chips. */ +#define DC_TYPE_21143 0x4 /* Intel 21143 */ +#define DC_TYPE_ASIX 0x5 /* ASIX AX88140A/AX88141 */ +#define DC_TYPE_AL981 0x6 /* ADMtek AL981 Comet */ +#define DC_TYPE_AN985 0x7 /* ADMtek AN985 Centaur */ +#define DC_TYPE_DM9102 0x8 /* Davicom DM9102 */ +#define DC_TYPE_PNICII 0x9 /* 82c115 PNIC II */ +#define DC_TYPE_PNIC 0xA /* 82c168/82c169 PNIC I */ +#define DC_TYPE_CONEXANT 0xC /* Conexant LANfinity RS7112 */ + +#define DC_IS_MACRONIX(x) \ + (x->dc_type == DC_TYPE_98713 || \ + x->dc_type == DC_TYPE_98713A || \ + x->dc_type == DC_TYPE_987x5) + +#define DC_IS_ADMTEK(x) \ + (x->dc_type == DC_TYPE_AL981 || \ + x->dc_type == DC_TYPE_AN985) + +#define DC_IS_INTEL(x) (x->dc_type == DC_TYPE_21143) +#define DC_IS_ASIX(x) (x->dc_type == DC_TYPE_ASIX) +#define DC_IS_COMET(x) (x->dc_type == DC_TYPE_AL981) +#define DC_IS_CENTAUR(x) (x->dc_type == DC_TYPE_AN985) +#define DC_IS_DAVICOM(x) (x->dc_type == DC_TYPE_DM9102) +#define DC_IS_PNICII(x) (x->dc_type == DC_TYPE_PNICII) +#define DC_IS_PNIC(x) (x->dc_type == DC_TYPE_PNIC) +#define DC_IS_CONEXANT(x) (x->dc_type == DC_TYPE_CONEXANT) + +/* MII/symbol mode port types */ +#define DC_PMODE_MII 0x1 +#define DC_PMODE_SYM 0x2 +#define DC_PMODE_SIA 0x3 + +/* + * Bus control bits. + */ +#define DC_BUSCTL_RESET 0x00000001 +#define DC_BUSCTL_ARBITRATION 0x00000002 +#define DC_BUSCTL_SKIPLEN 0x0000007C +#define DC_BUSCTL_BUF_BIGENDIAN 0x00000080 +#define DC_BUSCTL_BURSTLEN 0x00003F00 +#define DC_BUSCTL_CACHEALIGN 0x0000C000 +#define DC_BUSCTL_TXPOLL 0x000E0000 +#define DC_BUSCTL_DBO 0x00100000 +#define DC_BUSCTL_MRME 0x00200000 +#define DC_BUSCTL_MRLE 0x00800000 +#define DC_BUSCTL_MWIE 0x01000000 +#define DC_BUSCTL_ONNOW_ENB 0x04000000 + +#define DC_SKIPLEN_1LONG 0x00000004 +#define DC_SKIPLEN_2LONG 0x00000008 +#define DC_SKIPLEN_3LONG 0x00000010 +#define DC_SKIPLEN_4LONG 0x00000020 +#define DC_SKIPLEN_5LONG 0x00000040 + +#define DC_CACHEALIGN_NONE 0x00000000 +#define DC_CACHEALIGN_8LONG 0x00004000 +#define DC_CACHEALIGN_16LONG 0x00008000 +#define DC_CACHEALIGN_32LONG 0x0000C000 + +#define DC_BURSTLEN_USECA 0x00000000 +#define DC_BURSTLEN_1LONG 0x00000100 +#define DC_BURSTLEN_2LONG 0x00000200 +#define DC_BURSTLEN_4LONG 0x00000400 +#define DC_BURSTLEN_8LONG 0x00000800 +#define DC_BURSTLEN_16LONG 0x00001000 +#define DC_BURSTLEN_32LONG 0x00002000 + +#define DC_TXPOLL_OFF 0x00000000 +#define DC_TXPOLL_1 0x00020000 +#define DC_TXPOLL_2 0x00040000 +#define DC_TXPOLL_3 0x00060000 +#define DC_TXPOLL_4 0x00080000 +#define DC_TXPOLL_5 0x000A0000 +#define DC_TXPOLL_6 0x000C0000 +#define DC_TXPOLL_7 0x000E0000 + +/* + * Interrupt status bits. + */ +#define DC_ISR_TX_OK 0x00000001 +#define DC_ISR_TX_IDLE 0x00000002 +#define DC_ISR_TX_NOBUF 0x00000004 +#define DC_ISR_TX_JABBERTIMEO 0x00000008 +#define DC_ISR_LINKGOOD 0x00000010 +#define DC_ISR_TX_UNDERRUN 0x00000020 +#define DC_ISR_RX_OK 0x00000040 +#define DC_ISR_RX_NOBUF 0x00000080 +#define DC_ISR_RX_READ 0x00000100 +#define DC_ISR_RX_WATDOGTIMEO 0x00000200 +#define DC_ISR_TX_EARLY 0x00000400 +#define DC_ISR_TIMER_EXPIRED 0x00000800 +#define DC_ISR_LINKFAIL 0x00001000 +#define DC_ISR_BUS_ERR 0x00002000 +#define DC_ISR_RX_EARLY 0x00004000 +#define DC_ISR_ABNORMAL 0x00008000 +#define DC_ISR_NORMAL 0x00010000 +#define DC_ISR_RX_STATE 0x000E0000 +#define DC_ISR_TX_STATE 0x00700000 +#define DC_ISR_BUSERRTYPE 0x03800000 +#define DC_ISR_100MBPSLINK 0x08000000 +#define DC_ISR_MAGICKPACK 0x10000000 + +#define DC_RXSTATE_STOPPED 0x00000000 /* 000 - Stopped */ +#define DC_RXSTATE_FETCH 0x00020000 /* 001 - Fetching descriptor */ +#define DC_RXSTATE_ENDCHECK 0x00040000 /* 010 - check for rx end */ +#define DC_RXSTATE_WAIT 0x00060000 /* 011 - waiting for packet */ +#define DC_RXSTATE_SUSPEND 0x00080000 /* 100 - suspend rx */ +#define DC_RXSTATE_CLOSE 0x000A0000 /* 101 - close tx desc */ +#define DC_RXSTATE_FLUSH 0x000C0000 /* 110 - flush from FIFO */ +#define DC_RXSTATE_DEQUEUE 0x000E0000 /* 111 - dequeue from FIFO */ + +#define DC_TXSTATE_RESET 0x00000000 /* 000 - reset */ +#define DC_TXSTATE_FETCH 0x00100000 /* 001 - fetching descriptor */ +#define DC_TXSTATE_WAITEND 0x00200000 /* 010 - wait for tx end */ +#define DC_TXSTATE_READING 0x00300000 /* 011 - read and enqueue */ +#define DC_TXSTATE_RSVD 0x00400000 /* 100 - reserved */ +#define DC_TXSTATE_SETUP 0x00500000 /* 101 - setup packet */ +#define DC_TXSTATE_SUSPEND 0x00600000 /* 110 - suspend tx */ +#define DC_TXSTATE_CLOSE 0x00700000 /* 111 - close tx desc */ + +/* + * Network config bits. + */ +#define DC_NETCFG_RX_HASHPERF 0x00000001 +#define DC_NETCFG_RX_ON 0x00000002 +#define DC_NETCFG_RX_HASHONLY 0x00000004 +#define DC_NETCFG_RX_BADFRAMES 0x00000008 +#define DC_NETCFG_RX_INVFILT 0x00000010 +#define DC_NETCFG_BACKOFFCNT 0x00000020 +#define DC_NETCFG_RX_PROMISC 0x00000040 +#define DC_NETCFG_RX_ALLMULTI 0x00000080 +#define DC_NETCFG_FULLDUPLEX 0x00000200 +#define DC_NETCFG_LOOPBACK 0x00000C00 +#define DC_NETCFG_FORCECOLL 0x00001000 +#define DC_NETCFG_TX_ON 0x00002000 +#define DC_NETCFG_TX_THRESH 0x0000C000 +#define DC_NETCFG_TX_BACKOFF 0x00020000 +#define DC_NETCFG_PORTSEL 0x00040000 /* 0 == 10, 1 == 100 */ +#define DC_NETCFG_HEARTBEAT 0x00080000 +#define DC_NETCFG_STORENFWD 0x00200000 +#define DC_NETCFG_SPEEDSEL 0x00400000 /* 1 == 10, 0 == 100 */ +#define DC_NETCFG_PCS 0x00800000 +#define DC_NETCFG_SCRAMBLER 0x01000000 +#define DC_NETCFG_NO_RXCRC 0x02000000 +#define DC_NETCFG_RX_ALL 0x40000000 +#define DC_NETCFG_CAPEFFECT 0x80000000 + +#define DC_OPMODE_NORM 0x00000000 +#define DC_OPMODE_INTLOOP 0x00000400 +#define DC_OPMODE_EXTLOOP 0x00000800 + +#if 0 +#define DC_TXTHRESH_72BYTES 0x00000000 +#define DC_TXTHRESH_96BYTES 0x00004000 +#define DC_TXTHRESH_128BYTES 0x00008000 +#define DC_TXTHRESH_160BYTES 0x0000C000 +#endif + +#define DC_TXTHRESH_MIN 0x00000000 +#define DC_TXTHRESH_INC 0x00004000 +#define DC_TXTHRESH_MAX 0x0000C000 + + +/* + * Interrupt mask bits. + */ +#define DC_IMR_TX_OK 0x00000001 +#define DC_IMR_TX_IDLE 0x00000002 +#define DC_IMR_TX_NOBUF 0x00000004 +#define DC_IMR_TX_JABBERTIMEO 0x00000008 +#define DC_IMR_LINKGOOD 0x00000010 +#define DC_IMR_TX_UNDERRUN 0x00000020 +#define DC_IMR_RX_OK 0x00000040 +#define DC_IMR_RX_NOBUF 0x00000080 +#define DC_IMR_RX_READ 0x00000100 +#define DC_IMR_RX_WATDOGTIMEO 0x00000200 +#define DC_IMR_TX_EARLY 0x00000400 +#define DC_IMR_TIMER_EXPIRED 0x00000800 +#define DC_IMR_LINKFAIL 0x00001000 +#define DC_IMR_BUS_ERR 0x00002000 +#define DC_IMR_RX_EARLY 0x00004000 +#define DC_IMR_ABNORMAL 0x00008000 +#define DC_IMR_NORMAL 0x00010000 +#define DC_IMR_100MBPSLINK 0x08000000 +#define DC_IMR_MAGICKPACK 0x10000000 + +#define DC_INTRS \ + (DC_IMR_RX_OK|DC_IMR_TX_OK|DC_IMR_RX_NOBUF|DC_IMR_RX_WATDOGTIMEO|\ + DC_IMR_TX_NOBUF|DC_IMR_TX_UNDERRUN|DC_IMR_BUS_ERR| \ + DC_IMR_ABNORMAL|DC_IMR_NORMAL/*|DC_IMR_TX_EARLY*/) +/* + * Serial I/O (EEPROM/ROM) bits. + */ +#define DC_SIO_EE_CS 0x00000001 /* EEPROM chip select */ +#define DC_SIO_EE_CLK 0x00000002 /* EEPROM clock */ +#define DC_SIO_EE_DATAIN 0x00000004 /* EEPROM data output */ +#define DC_SIO_EE_DATAOUT 0x00000008 /* EEPROM data input */ +#define DC_SIO_ROMDATA4 0x00000010 +#define DC_SIO_ROMDATA5 0x00000020 +#define DC_SIO_ROMDATA6 0x00000040 +#define DC_SIO_ROMDATA7 0x00000080 +#define DC_SIO_EESEL 0x00000800 +#define DC_SIO_ROMSEL 0x00001000 +#define DC_SIO_ROMCTL_WRITE 0x00002000 +#define DC_SIO_ROMCTL_READ 0x00004000 +#define DC_SIO_MII_CLK 0x00010000 /* MDIO clock */ +#define DC_SIO_MII_DATAOUT 0x00020000 /* MDIO data out */ +#define DC_SIO_MII_DIR 0x00040000 /* MDIO dir */ +#define DC_SIO_MII_DATAIN 0x00080000 /* MDIO data in */ + +#define DC_EECMD_WRITE 0x140 +#define DC_EECMD_READ 0x180 +#define DC_EECMD_ERASE 0x1c0 + +#define DC_EE_NODEADDR_OFFSET 0x70 +#define DC_EE_NODEADDR 10 + +/* + * General purpose timer register + */ +#define DC_TIMER_VALUE 0x0000FFFF +#define DC_TIMER_CONTINUOUS 0x00010000 + +/* + * 10baseT status register + */ +#define DC_TSTAT_MIIACT 0x00000001 /* MII port activity */ +#define DC_TSTAT_LS100 0x00000002 /* link status of 100baseTX */ +#define DC_TSTAT_LS10 0x00000004 /* link status of 10baseT */ +#define DC_TSTAT_AUTOPOLARITY 0x00000008 +#define DC_TSTAT_AUIACT 0x00000100 /* AUI activity */ +#define DC_TSTAT_10BTACT 0x00000200 /* 10baseT activity */ +#define DC_TSTAT_NSN 0x00000400 /* non-stable FLPs detected */ +#define DC_TSTAT_REMFAULT 0x00000800 +#define DC_TSTAT_ANEGSTAT 0x00007000 +#define DC_TSTAT_LP_CAN_NWAY 0x00008000 /* link partner supports NWAY */ +#define DC_TSTAT_LPCODEWORD 0xFFFF0000 /* link partner's code word */ + +#define DC_ASTAT_DISABLE 0x00000000 +#define DC_ASTAT_TXDISABLE 0x00001000 +#define DC_ASTAT_ABDETECT 0x00002000 +#define DC_ASTAT_ACKDETECT 0x00003000 +#define DC_ASTAT_CMPACKDETECT 0x00004000 +#define DC_ASTAT_AUTONEGCMP 0x00005000 +#define DC_ASTAT_LINKCHECK 0x00006000 + +/* + * PHY reset register + */ +#define DC_SIA_RESET 0x00000001 +#define DC_SIA_AUI 0x00000008 /* AUI or 10baseT */ + +/* + * 10baseT control register + */ +#define DC_TCTL_ENCODER_ENB 0x00000001 +#define DC_TCTL_LOOPBACK 0x00000002 +#define DC_TCTL_DRIVER_ENB 0x00000004 +#define DC_TCTL_LNKPULSE_ENB 0x00000008 +#define DC_TCTL_HALFDUPLEX 0x00000040 +#define DC_TCTL_AUTONEGENBL 0x00000080 +#define DC_TCTL_RX_SQUELCH 0x00000100 +#define DC_TCTL_COLL_SQUELCH 0x00000200 +#define DC_TCTL_COLL_DETECT 0x00000400 +#define DC_TCTL_SQE_ENB 0x00000800 +#define DC_TCTL_LINKTEST 0x00001000 +#define DC_TCTL_AUTOPOLARITY 0x00002000 +#define DC_TCTL_SET_POL_PLUS 0x00004000 +#define DC_TCTL_AUTOSENSE 0x00008000 /* 10bt/AUI autosense */ +#define DC_TCTL_100BTXHALF 0x00010000 +#define DC_TCTL_100BTXFULL 0x00020000 +#define DC_TCTL_100BT4 0x00040000 + +/* + * Watchdog timer register + */ +#define DC_WDOG_JABBERDIS 0x00000001 +#define DC_WDOG_HOSTUNJAB 0x00000002 +#define DC_WDOG_JABBERCLK 0x00000004 +#define DC_WDOG_RXWDOGDIS 0x00000010 +#define DC_WDOG_RXWDOGCLK 0x00000020 +#define DC_WDOG_MUSTBEZERO 0x00000100 +#define DC_WDOG_AUIBNC 0x00100000 +#define DC_WDOG_ACTIVITY 0x00200000 +#define DC_WDOG_RX_MATCH 0x00400000 +#define DC_WDOG_LINK 0x00800000 +#define DC_WDOG_CTLWREN 0x08000000 + +/* + * Size of a setup frame. + */ +#define DC_SFRAME_LEN 192 + +/* + * 21x4x TX/RX list structure. + */ + +struct dc_desc { + u_int32_t dc_status; + u_int32_t dc_ctl; + u_int32_t dc_ptr1; + u_int32_t dc_ptr2; +}; + +#define dc_data dc_ptr1 +#define dc_next dc_ptr2 + +#define DC_RXSTAT_FIFOOFLOW 0x00000001 +#define DC_RXSTAT_CRCERR 0x00000002 +#define DC_RXSTAT_DRIBBLE 0x00000004 +#define DC_RXSTAT_MIIERE 0x00000008 +#define DC_RXSTAT_WATCHDOG 0x00000010 +#define DC_RXSTAT_FRAMETYPE 0x00000020 /* 0 == IEEE 802.3 */ +#define DC_RXSTAT_COLLSEEN 0x00000040 +#define DC_RXSTAT_GIANT 0x00000080 +#define DC_RXSTAT_LASTFRAG 0x00000100 +#define DC_RXSTAT_FIRSTFRAG 0x00000200 +#define DC_RXSTAT_MULTICAST 0x00000400 +#define DC_RXSTAT_RUNT 0x00000800 +#define DC_RXSTAT_RXTYPE 0x00003000 +#define DC_RXSTAT_DE 0x00004000 +#define DC_RXSTAT_RXERR 0x00008000 +#define DC_RXSTAT_RXLEN 0x3FFF0000 +#define DC_RXSTAT_OWN 0x80000000 + +#define DC_RXBYTES(x) ((x & DC_RXSTAT_RXLEN) >> 16) +#define DC_RXSTAT (DC_RXSTAT_FIRSTFRAG|DC_RXSTAT_LASTFRAG|DC_RXSTAT_OWN) + +#define DC_RXCTL_BUFLEN1 0x00000FFF +#define DC_RXCTL_BUFLEN2 0x00FFF000 +#define DC_RXCTL_RLINK 0x01000000 +#define DC_RXCTL_RLAST 0x02000000 + +#define DC_TXSTAT_DEFER 0x00000001 +#define DC_TXSTAT_UNDERRUN 0x00000002 +#define DC_TXSTAT_LINKFAIL 0x00000003 +#define DC_TXSTAT_COLLCNT 0x00000078 +#define DC_TXSTAT_SQE 0x00000080 +#define DC_TXSTAT_EXCESSCOLL 0x00000100 +#define DC_TXSTAT_LATECOLL 0x00000200 +#define DC_TXSTAT_NOCARRIER 0x00000400 +#define DC_TXSTAT_CARRLOST 0x00000800 +#define DC_TXSTAT_JABTIMEO 0x00004000 +#define DC_TXSTAT_ERRSUM 0x00008000 +#define DC_TXSTAT_OWN 0x80000000 + +#define DC_TXCTL_BUFLEN1 0x000007FF +#define DC_TXCTL_BUFLEN2 0x003FF800 +#define DC_TXCTL_FILTTYPE0 0x00400000 +#define DC_TXCTL_PAD 0x00800000 +#define DC_TXCTL_TLINK 0x01000000 +#define DC_TXCTL_TLAST 0x02000000 +#define DC_TXCTL_NOCRC 0x04000000 +#define DC_TXCTL_SETUP 0x08000000 +#define DC_TXCTL_FILTTYPE1 0x10000000 +#define DC_TXCTL_FIRSTFRAG 0x20000000 +#define DC_TXCTL_LASTFRAG 0x40000000 +#define DC_TXCTL_FINT 0x80000000 + +#define DC_FILTER_PERFECT 0x00000000 +#define DC_FILTER_HASHPERF 0x00400000 +#define DC_FILTER_INVERSE 0x10000000 +#define DC_FILTER_HASHONLY 0x10400000 + +#define DC_MAXFRAGS 16 +#ifdef DEVICE_POLLING +#define DC_RX_LIST_CNT 192 +#else +#define DC_RX_LIST_CNT 64 +#endif +#define DC_TX_LIST_CNT 256 +#define DC_MIN_FRAMELEN 60 +#define DC_RXLEN 1536 + +#define DC_INC(x, y) (x) = (x + 1) % y + +struct dc_list_data { + struct dc_desc dc_rx_list[DC_RX_LIST_CNT]; + struct dc_desc dc_tx_list[DC_TX_LIST_CNT]; +}; + +struct dc_chain_data { + struct mbuf *dc_rx_chain[DC_RX_LIST_CNT]; + struct mbuf *dc_tx_chain[DC_TX_LIST_CNT]; + u_int32_t dc_sbuf[DC_SFRAME_LEN/sizeof(u_int32_t)]; + u_int8_t dc_pad[DC_MIN_FRAMELEN]; + int dc_tx_prod; + int dc_tx_cons; + int dc_tx_cnt; + int dc_rx_prod; +}; + +struct dc_mediainfo { + int dc_media; + u_int8_t *dc_gp_ptr; + u_int8_t dc_gp_len; + u_int8_t *dc_reset_ptr; + u_int8_t dc_reset_len; + struct dc_mediainfo *dc_next; +}; + + +struct dc_type { + u_int16_t dc_vid; + u_int16_t dc_did; + char *dc_name; + int dc_devsig; + int dc_bus; + int dc_dev; + int dc_fun; +}; + +struct dc_mii_frame { + u_int8_t mii_stdelim; + u_int8_t mii_opcode; + u_int8_t mii_phyaddr; + u_int8_t mii_regaddr; + u_int8_t mii_turnaround; + u_int16_t mii_data; +}; + +/* + * MII constants + */ +#define DC_MII_STARTDELIM 0x01 +#define DC_MII_READOP 0x02 +#define DC_MII_WRITEOP 0x01 +#define DC_MII_TURNAROUND 0x02 + + +/* + * Registers specific to clone devices. + * This mainly relates to RX filter programming: not all 21x4x clones + * use the standard DEC filter programming mechanism. + */ + +/* + * ADMtek specific registers and constants for the AL981 and AN985. + * The AN985 doesn't use the magic PHY registers. + */ +#define DC_AL_CR 0x88 /* command register */ +#define DC_AL_PAR0 0xA4 /* station address */ +#define DC_AL_PAR1 0xA8 /* station address */ +#define DC_AL_MAR0 0xAC /* multicast hash filter */ +#define DC_AL_MAR1 0xB0 /* multicast hash filter */ +#define DC_AL_BMCR 0xB4 /* built in PHY control */ +#define DC_AL_BMSR 0xB8 /* built in PHY status */ +#define DC_AL_VENID 0xBC /* built in PHY ID0 */ +#define DC_AL_DEVID 0xC0 /* built in PHY ID1 */ +#define DC_AL_ANAR 0xC4 /* built in PHY autoneg advert */ +#define DC_AL_LPAR 0xC8 /* bnilt in PHY link part. ability */ +#define DC_AL_ANER 0xCC /* built in PHY autoneg expansion */ + +#define DC_AL_CR_ATUR 0x00000001 /* automatic TX underrun recovery */ +#define DC_ADMTEK_PHYADDR 0x1 +#define DC_AL_EE_NODEADDR 4 +/* End of ADMtek specific registers */ + +/* + * ASIX specific registers. + */ +#define DC_AX_FILTIDX 0x68 /* RX filter index */ +#define DC_AX_FILTDATA 0x70 /* RX filter data */ + +/* + * Special ASIX-specific bits in the ASIX NETCFG register (CSR6). + */ +#define DC_AX_NETCFG_RX_BROAD 0x00000100 + +/* + * RX Filter Index Register values + */ +#define DC_AX_FILTIDX_PAR0 0x00000000 +#define DC_AX_FILTIDX_PAR1 0x00000001 +#define DC_AX_FILTIDX_MAR0 0x00000002 +#define DC_AX_FILTIDX_MAR1 0x00000003 +/* End of ASIX specific registers */ + +/* + * Macronix specific registers. The Macronix chips have a special + * register for reading the NWAY status, which we don't use, plus + * a magic packet register, which we need to tweak a bit per the + * Macronix application notes. + */ +#define DC_MX_MAGICPACKET 0x80 +#define DC_MX_NWAYSTAT 0xA0 + +/* + * Magic packet register + */ +#define DC_MX_MPACK_DISABLE 0x00400000 + +/* + * NWAY status register. + */ +#define DC_MX_NWAY_10BTHALF 0x08000000 +#define DC_MX_NWAY_10BTFULL 0x10000000 +#define DC_MX_NWAY_100BTHALF 0x20000000 +#define DC_MX_NWAY_100BTFULL 0x40000000 +#define DC_MX_NWAY_100BT4 0x80000000 + +/* + * These are magic values that must be written into CSR16 + * (DC_MX_MAGICPACKET) in order to put the chip into proper + * operating mode. The magic numbers are documented in the + * Macronix 98715 application notes. + */ +#define DC_MX_MAGIC_98713 0x0F370000 +#define DC_MX_MAGIC_98713A 0x0B3C0000 +#define DC_MX_MAGIC_98715 0x0B3C0000 +#define DC_MX_MAGIC_98725 0x0B3C0000 +/* End of Macronix specific registers */ + +/* + * PNIC 82c168/82c169 specific registers. + * The PNIC has its own special NWAY support, which doesn't work, + * and shortcut ways of reading the EEPROM and MII bus. + */ +#define DC_PN_GPIO 0x60 /* general purpose pins control */ +#define DC_PN_PWRUP_CFG 0x90 /* config register, set by EEPROM */ +#define DC_PN_SIOCTL 0x98 /* serial EEPROM control register */ +#define DC_PN_MII 0xA0 /* MII access register */ +#define DC_PN_NWAY 0xB8 /* Internal NWAY register */ + +/* Serial I/O EEPROM register */ +#define DC_PN_SIOCTL_DATA 0x0000003F +#define DC_PN_SIOCTL_OPCODE 0x00000300 +#define DC_PN_SIOCTL_BUSY 0x80000000 + +#define DC_PN_EEOPCODE_ERASE 0x00000300 +#define DC_PN_EEOPCODE_READ 0x00000600 +#define DC_PN_EEOPCODE_WRITE 0x00000100 + +/* + * The first two general purpose pins control speed selection and + * 100Mbps loopback on the 82c168 chip. The control bits should always + * be set (to make the data pins outputs) and the speed selction and + * loopback bits set accordingly when changing media. Physically, this + * will set the state of a relay mounted on the card. + */ +#define DC_PN_GPIO_DATA0 0x000000001 +#define DC_PN_GPIO_DATA1 0x000000002 +#define DC_PN_GPIO_DATA2 0x000000004 +#define DC_PN_GPIO_DATA3 0x000000008 +#define DC_PN_GPIO_CTL0 0x000000010 +#define DC_PN_GPIO_CTL1 0x000000020 +#define DC_PN_GPIO_CTL2 0x000000040 +#define DC_PN_GPIO_CTL3 0x000000080 +#define DC_PN_GPIO_SPEEDSEL DC_PN_GPIO_DATA0/* 1 == 100Mbps, 0 == 10Mbps */ +#define DC_PN_GPIO_100TX_LOOP DC_PN_GPIO_DATA1/* 1 == normal, 0 == loop */ +#define DC_PN_GPIO_BNC_ENB DC_PN_GPIO_DATA2 +#define DC_PN_GPIO_100TX_LNK DC_PN_GPIO_DATA3 +#define DC_PN_GPIO_SETBIT(sc, r) \ + DC_SETBIT(sc, DC_PN_GPIO, ((r) | (r << 4))) +#define DC_PN_GPIO_CLRBIT(sc, r) \ + { \ + DC_SETBIT(sc, DC_PN_GPIO, ((r) << 4)); \ + DC_CLRBIT(sc, DC_PN_GPIO, (r)); \ + } + +/* shortcut MII access register */ +#define DC_PN_MII_DATA 0x0000FFFF +#define DC_PN_MII_RESERVER 0x00020000 +#define DC_PN_MII_REGADDR 0x007C0000 +#define DC_PN_MII_PHYADDR 0x0F800000 +#define DC_PN_MII_OPCODE 0x30000000 +#define DC_PN_MII_BUSY 0x80000000 + +#define DC_PN_MIIOPCODE_READ 0x60020000 +#define DC_PN_MIIOPCODE_WRITE 0x50020000 + +/* Internal NWAY bits */ +#define DC_PN_NWAY_RESET 0x00000001 /* reset */ +#define DC_PN_NWAY_PDOWN 0x00000002 /* power down */ +#define DC_PN_NWAY_BYPASS 0x00000004 /* bypass */ +#define DC_PN_NWAY_AUILOWCUR 0x00000008 /* AUI low current */ +#define DC_PN_NWAY_TPEXTEND 0x00000010 /* low squelch voltage */ +#define DC_PN_NWAY_POLARITY 0x00000020 /* 0 == on, 1 == off */ +#define DC_PN_NWAY_TP 0x00000040 /* 1 == tp, 0 == AUI */ +#define DC_PN_NWAY_AUIVOLT 0x00000080 /* 1 == full, 0 == half */ +#define DC_PN_NWAY_DUPLEX 0x00000100 /* LED, 1 == full, 0 == half */ +#define DC_PN_NWAY_LINKTEST 0x00000200 /* 0 == on, 1 == off */ +#define DC_PN_NWAY_AUTODETECT 0x00000400 /* 1 == off, 0 == on */ +#define DC_PN_NWAY_SPEEDSEL 0x00000800 /* LED, 0 = 10, 1 == 100 */ +#define DC_PN_NWAY_NWAY_ENB 0x00001000 /* 0 == off, 1 == on */ +#define DC_PN_NWAY_CAP10HDX 0x00002000 +#define DC_PN_NWAY_CAP10FDX 0x00004000 +#define DC_PN_NWAY_CAP100FDX 0x00008000 +#define DC_PN_NWAY_CAP100HDX 0x00010000 +#define DC_PN_NWAY_CAP100T4 0x00020000 +#define DC_PN_NWAY_ANEGRESTART 0x02000000 /* resets when aneg done */ +#define DC_PN_NWAY_REMFAULT 0x04000000 +#define DC_PN_NWAY_LPAR10HDX 0x08000000 +#define DC_PN_NWAY_LPAR10FDX 0x10000000 +#define DC_PN_NWAY_LPAR100FDX 0x20000000 +#define DC_PN_NWAY_LPAR100HDX 0x40000000 +#define DC_PN_NWAY_LPAR100T4 0x80000000 + +/* End of PNIC specific registers */ + +/* + * CONEXANT specific registers. + */ + +#define DC_CONEXANT_PHYADDR 0x1 +#define DC_CONEXANT_EE_NODEADDR 0x19A + +/* End of CONEXANT specific registers */ + + +struct dc_softc { + struct arpcom arpcom; /* interface info */ + rtems_irq_connect_data irqInfo; + volatile u_int32_t membase; + rtems_id daemontid; +#if 0 + bus_space_handle_t dc_bhandle; /* bus space handle */ + bus_space_tag_t dc_btag; /* bus space tag */ + void *dc_intrhand; + struct resource *dc_irq; + struct resource *dc_res; +#endif + struct dc_type *dc_info; /* adapter info */ +/* device_t dc_miibus; */ + u_int8_t dc_unit; /* interface number */ + char *dc_name; + u_int8_t dc_type; + u_int8_t dc_pmode; + u_int8_t dc_link; + u_int8_t dc_cachesize; + int dc_romwidth; + int dc_pnic_rx_bug_save; + unsigned char *dc_pnic_rx_buf; + int dc_if_flags; + int dc_if_media; + u_int32_t dc_flags; + u_int32_t dc_txthresh; + u_int8_t *dc_srom; + struct dc_mediainfo *dc_mi; +/* + struct callout_handle dc_stat_ch; +*/ + struct dc_list_data *dc_ldata; + struct dc_chain_data dc_cdata; +#ifdef __alpha__ + int dc_srm_media; +#endif +#ifdef DEVICE_POLLING + int rxcycles; /* ... when polling */ +#endif + int suspended; /* 0 = normal 1 = suspended */ + + u_int32_t saved_maps[5]; /* pci data */ + u_int32_t saved_biosaddr; + u_int8_t saved_intline; + u_int8_t saved_cachelnsz; + u_int8_t saved_lattimer; +}; + +#define DC_TX_POLL 0x00000001 +#define DC_TX_COALESCE 0x00000002 +#define DC_TX_ADMTEK_WAR 0x00000004 +#define DC_TX_USE_TX_INTR 0x00000008 +#define DC_RX_FILTER_TULIP 0x00000010 +#define DC_TX_INTR_FIRSTFRAG 0x00000020 +#define DC_PNIC_RX_BUG_WAR 0x00000040 +#define DC_TX_FIXED_RING 0x00000080 +#define DC_TX_STORENFWD 0x00000100 +#define DC_REDUCED_MII_POLL 0x00000200 +#define DC_TX_INTR_ALWAYS 0x00000400 +#define DC_21143_NWAY 0x00000800 +#define DC_128BIT_HASH 0x00001000 +#define DC_64BIT_HASH 0x00002000 +#define DC_TULIP_LEDS 0x00004000 +#define DC_TX_ONE 0x00008000 + +/* + * register space access macros + */ +#define _readl_(addr) (*(volatile unsigned int *)((void *)(addr))) +#define _writel_(b, addr) (*(volatile unsigned int *)((void *)(addr)) = (b)) + +#define CSR_READ_4(sc, reg) _readl_(((sc->membase)+(reg))) +#define CSR_WRITE_4(sc, reg, val) _writel_(val, ((sc->membase)+(reg))) + + + + + + +#define DC_TIMEOUT 1000 +#define ETHER_ALIGN 2 + +/* + * General constants that are fun to know. + */ + +/* + * DEC PCI vendor ID + */ +#define DC_VENDORID_DEC 0x1011 + +/* + * DEC/Intel 21143 PCI device ID + */ +#define DC_DEVICEID_21143 0x0019 + +/* + * Macronix PCI vendor ID + */ +#define DC_VENDORID_MX 0x10D9 + +/* + * Macronix PMAC device IDs. + */ +#define DC_DEVICEID_98713 0x0512 +#define DC_DEVICEID_987x5 0x0531 +#define DC_DEVICEID_98727 0x0532 +#define DC_DEVICEID_98732 0x0532 + +/* Macronix PCI revision codes. */ +#define DC_REVISION_98713 0x00 +#define DC_REVISION_98713A 0x10 +#define DC_REVISION_98715 0x20 +#define DC_REVISION_98715AEC_C 0x25 +#define DC_REVISION_98725 0x30 + +/* + * Compex PCI vendor ID. + */ +#define DC_VENDORID_CP 0x11F6 + +/* + * Compex PMAC PCI device IDs. + */ +#define DC_DEVICEID_98713_CP 0x9881 + +/* + * Lite-On PNIC PCI vendor ID + */ +#define DC_VENDORID_LO 0x11AD + +/* + * 82c168/82c169 PNIC device IDs. Both chips have the same device + * ID but different revisions. Revision 0x10 is the 82c168, and + * 0x20 is the 82c169. + */ +#define DC_DEVICEID_82C168 0x0002 + +#define DC_REVISION_82C168 0x10 +#define DC_REVISION_82C169 0x20 + +/* + * Lite-On PNIC II device ID. Note: this is actually a Macronix 98715A + * with wake on lan/magic packet support. + */ +#define DC_DEVICEID_82C115 0xc115 + +/* + * Davicom vendor ID. + */ +#define DC_VENDORID_DAVICOM 0x1282 + +/* + * Davicom device IDs. + */ +#define DC_DEVICEID_DM9009 0x9009 +#define DC_DEVICEID_DM9100 0x9100 +#define DC_DEVICEID_DM9102 0x9102 + +/* + * The DM9102A has the same PCI device ID as the DM9102, + * but a higher revision code. + */ +#define DC_REVISION_DM9102 0x10 +#define DC_REVISION_DM9102A 0x30 + +/* + * ADMtek vendor ID. + */ +#define DC_VENDORID_ADMTEK 0x1317 + +/* + * ADMtek device IDs. + */ +#define DC_DEVICEID_AL981 0x0981 +#define DC_DEVICEID_AN985 0x0985 + +/* + * ASIX vendor ID. + */ +#define DC_VENDORID_ASIX 0x125B + +/* + * ASIX device IDs. + */ +#define DC_DEVICEID_AX88140A 0x1400 + +/* + * The ASIX AX88140 and ASIX AX88141 have the same vendor and + * device IDs but different revision values. + */ +#define DC_REVISION_88140 0x00 +#define DC_REVISION_88141 0x10 + +/* + * Accton vendor ID. + */ +#define DC_VENDORID_ACCTON 0x1113 + +/* + * Accton device IDs. + */ +#define DC_DEVICEID_EN1217 0x1217 +#define DC_DEVICEID_EN2242 0x1216 + +/* + * Conexant vendor ID. + */ +#define DC_VENDORID_CONEXANT 0x14f1 + +/* + * Conexant device IDs. + */ +#define DC_DEVICEID_RS7112 0x1803 + +/* + * PCI low memory base and low I/O base register, and + * other PCI registers. + */ + +#define DC_PCI_CFID 0x00 /* Id */ +#define DC_PCI_CFCS 0x04 /* Command and status */ +#define DC_PCI_CFRV 0x08 /* Revision */ +#define DC_PCI_CFLT 0x0C /* Latency timer */ +#define DC_PCI_CFBIO 0x10 /* Base I/O address */ +#define DC_PCI_CFBMA 0x14 /* Base memory address */ +#define DC_PCI_CCIS 0x28 /* Card info struct */ +#define DC_PCI_CSID 0x2C /* Subsystem ID */ +#define DC_PCI_CBER 0x30 /* Expansion ROM base address */ +#define DC_PCI_CCAP 0x34 /* Caps pointer - PD/TD chip only */ +#define DC_PCI_CFIT 0x3C /* Interrupt */ +#define DC_PCI_CFDD 0x40 /* Device and driver area */ +#define DC_PCI_CWUA0 0x44 /* Wake-Up LAN addr 0 */ +#define DC_PCI_CWUA1 0x48 /* Wake-Up LAN addr 1 */ +#define DC_PCI_SOP0 0x4C /* SecureON passwd 0 */ +#define DC_PCI_SOP1 0x50 /* SecureON passwd 1 */ +#define DC_PCI_CWUC 0x54 /* Configuration Wake-Up cmd */ +#define DC_PCI_CCID 0xDC /* Capability ID - PD/TD only */ +#define DC_PCI_CPMC 0xE0 /* Pwrmgmt ctl & sts - PD/TD only */ + +/* PCI ID register */ +#define DC_CFID_VENDOR 0x0000FFFF +#define DC_CFID_DEVICE 0xFFFF0000 + +/* PCI command/status register */ +#define DC_CFCS_IOSPACE 0x00000001 /* I/O space enable */ +#define DC_CFCS_MEMSPACE 0x00000002 /* memory space enable */ +#define DC_CFCS_BUSMASTER 0x00000004 /* bus master enable */ +#define DC_CFCS_MWI_ENB 0x00000010 /* mem write and inval enable */ +#define DC_CFCS_PARITYERR_ENB 0x00000040 /* parity error enable */ +#define DC_CFCS_SYSERR_ENB 0x00000100 /* system error enable */ +#define DC_CFCS_NEWCAPS 0x00100000 /* new capabilities */ +#define DC_CFCS_FAST_B2B 0x00800000 /* fast back-to-back capable */ +#define DC_CFCS_DATAPARITY 0x01000000 /* Parity error report */ +#define DC_CFCS_DEVSELTIM 0x06000000 /* devsel timing */ +#define DC_CFCS_TGTABRT 0x10000000 /* received target abort */ +#define DC_CFCS_MASTERABRT 0x20000000 /* received master abort */ +#define DC_CFCS_SYSERR 0x40000000 /* asserted system error */ +#define DC_CFCS_PARITYERR 0x80000000 /* asserted parity error */ + +/* PCI revision register */ +#define DC_CFRV_STEPPING 0x0000000F +#define DC_CFRV_REVISION 0x000000F0 +#define DC_CFRV_SUBCLASS 0x00FF0000 +#define DC_CFRV_BASECLASS 0xFF000000 + +#define DC_21143_PB_REV 0x00000030 +#define DC_21143_TB_REV 0x00000030 +#define DC_21143_PC_REV 0x00000030 +#define DC_21143_TC_REV 0x00000030 +#define DC_21143_PD_REV 0x00000041 +#define DC_21143_TD_REV 0x00000041 + +/* PCI latency timer register */ +#define DC_CFLT_CACHELINESIZE 0x000000FF +#define DC_CFLT_LATENCYTIMER 0x0000FF00 + +/* PCI subsystem ID register */ +#define DC_CSID_VENDOR 0x0000FFFF +#define DC_CSID_DEVICE 0xFFFF0000 + +/* PCI cababilities pointer */ +#define DC_CCAP_OFFSET 0x000000FF + +/* PCI interrupt config register */ +#define DC_CFIT_INTLINE 0x000000FF +#define DC_CFIT_INTPIN 0x0000FF00 +#define DC_CFIT_MIN_GNT 0x00FF0000 +#define DC_CFIT_MAX_LAT 0xFF000000 + +/* PCI capability register */ +#define DC_CCID_CAPID 0x000000FF +#define DC_CCID_NEXTPTR 0x0000FF00 +#define DC_CCID_PM_VERS 0x00070000 +#define DC_CCID_PME_CLK 0x00080000 +#define DC_CCID_DVSPEC_INT 0x00200000 +#define DC_CCID_STATE_D1 0x02000000 +#define DC_CCID_STATE_D2 0x04000000 +#define DC_CCID_PME_D0 0x08000000 +#define DC_CCID_PME_D1 0x10000000 +#define DC_CCID_PME_D2 0x20000000 +#define DC_CCID_PME_D3HOT 0x40000000 +#define DC_CCID_PME_D3COLD 0x80000000 + +/* PCI power management control/status register */ +#define DC_CPMC_STATE 0x00000003 +#define DC_CPMC_PME_ENB 0x00000100 +#define DC_CPMC_PME_STS 0x00008000 + +#define DC_PSTATE_D0 0x0 +#define DC_PSTATE_D1 0x1 +#define DC_PSTATE_D2 0x2 +#define DC_PSTATE_D3 0x3 + +/* Device specific region */ +/* Configuration and driver area */ +#define DC_CFDD_DRVUSE 0x0000FFFF +#define DC_CFDD_SNOOZE_MODE 0x40000000 +#define DC_CFDD_SLEEP_MODE 0x80000000 + +/* Configuration wake-up command register */ +#define DC_CWUC_MUST_BE_ZERO 0x00000001 +#define DC_CWUC_SECUREON_ENB 0x00000002 +#define DC_CWUC_FORCE_WUL 0x00000004 +#define DC_CWUC_BNC_ABILITY 0x00000008 +#define DC_CWUC_AUI_ABILITY 0x00000010 +#define DC_CWUC_TP10_ABILITY 0x00000020 +#define DC_CWUC_MII_ABILITY 0x00000040 +#define DC_CWUC_SYM_ABILITY 0x00000080 +#define DC_CWUC_LOCK 0x00000100 + +/* + * SROM nonsense. + */ + +#define DC_IB_CTLRCNT 0x13 +#define DC_IB_LEAF0_CNUM 0x1A +#define DC_IB_LEAF0_OFFSET 0x1B + +struct dc_info_leaf { + u_int16_t dc_conntype; + u_int8_t dc_blkcnt; + u_int8_t dc_rsvd; + u_int16_t dc_infoblk; +}; + +#define DC_CTYPE_10BT 0x0000 +#define DC_CTYPE_10BT_NWAY 0x0100 +#define DC_CTYPE_10BT_FDX 0x0204 +#define DC_CTYPE_10B2 0x0001 +#define DC_CTYPE_10B5 0x0002 +#define DC_CTYPE_100BT 0x0003 +#define DC_CTYPE_100BT_FDX 0x0205 +#define DC_CTYPE_100T4 0x0006 +#define DC_CTYPE_100FX 0x0007 +#define DC_CTYPE_100FX_FDX 0x0208 +#define DC_CTYPE_MII_10BT 0x0009 +#define DC_CTYPE_MII_10BT_FDX 0x020A +#define DC_CTYPE_MII_100BT 0x000D +#define DC_CTYPE_MII_100BT_FDX 0x020E +#define DC_CTYPE_MII_100T4 0x000F +#define DC_CTYPE_MII_100FX 0x0010 +#define DC_CTYPE_MII_100FX_FDX 0x0211 +#define DC_CTYPE_DYN_PUP_AUTOSENSE 0x0800 +#define DC_CTYPE_PUP_AUTOSENSE 0x8800 +#define DC_CTYPE_NOMEDIA 0xFFFF + +#define DC_EBLOCK_SIA 0x0002 +#define DC_EBLOCK_MII 0x0003 +#define DC_EBLOCK_SYM 0x0004 +#define DC_EBLOCK_RESET 0x0005 +#define DC_EBLOCK_PHY_SHUTDOWN 0x0006 + +struct dc_leaf_hdr { + u_int16_t dc_mtype; + u_int8_t dc_mcnt; + u_int8_t dc_rsvd; +}; + +struct dc_eblock_hdr { + u_int8_t dc_len; + u_int8_t dc_type; +}; + +struct dc_eblock_sia { + struct dc_eblock_hdr dc_sia_hdr; + u_int8_t dc_sia_code; + u_int8_t dc_sia_mediaspec[6]; /* CSR13, CSR14, CSR15 */ + u_int8_t dc_sia_gpio_ctl[2]; + u_int8_t dc_sia_gpio_dat[2]; +}; + +#define DC_SIA_CODE_10BT 0x00 +#define DC_SIA_CODE_10B2 0x01 +#define DC_SIA_CODE_10B5 0x02 +#define DC_SIA_CODE_10BT_FDX 0x04 +#define DC_SIA_CODE_EXT 0x40 + +/* + * Note that the first word in the gpr and reset + * sequences is always a control word. + */ +struct dc_eblock_mii { + struct dc_eblock_hdr dc_mii_hdr; + u_int8_t dc_mii_phynum; + u_int8_t dc_gpr_len; +/* u_int16_t dc_gpr_dat[n]; */ +/* u_int8_t dc_reset_len; */ +/* u_int16_t dc_reset_dat[n]; */ +/* There are other fields after these, but we don't + * care about them since they can be determined by looking + * at the PHY. + */ +}; + +struct dc_eblock_sym { + struct dc_eblock_hdr dc_sym_hdr; + u_int8_t dc_sym_code; + u_int8_t dc_sym_gpio_ctl[2]; + u_int8_t dc_sym_gpio_dat[2]; + u_int8_t dc_sym_cmd[2]; +}; + +#define DC_SYM_CODE_100BT 0x03 +#define DC_SYM_CODE_100BT_FDX 0x05 +#define DC_SYM_CODE_100T4 0x06 +#define DC_SYM_CODE_100FX 0x07 +#define DC_SYM_CODE_100FX_FDX 0x08 + +struct dc_eblock_reset { + struct dc_eblock_hdr dc_reset_hdr; + u_int8_t dc_reset_len; +/* u_int16_t dc_reset_dat[n]; */ +}; + +#ifdef __alpha__ +#undef vtophys +#define vtophys(va) alpha_XXX_dmamap((vm_offset_t)va) +#endif |