1 files changed, 122 insertions, 0 deletions
diff --git a/bsps/bfin/bf537Stamp/include/bsp.h b/bsps/bfin/bf537Stamp/include/bsp.h
new file mode 100644
index 0000000000..8b14be13f6
--- /dev/null
+++ b/bsps/bfin/bf537Stamp/include/bsp.h
@@ -0,0 +1,122 @@
+/*  bsp.h
+ *
+ *  This include file contains all board IO definitions for bf537Stamp.
+ *
+ *  Copyright (c) 2006 by Atos Automacao Industrial Ltda.
+ *             written by Alain Schaefer <alain.schaefer@easc.ch>
+ *                    and Antonio Giovanini <antonio@atos.com.br>
+ *
+ *  The license and distribution terms for this file may be
+ *  found in the file LICENSE in this distribution or at
+ *  http://www.rtems.org/license/LICENSE.
+ */
+
+
+#ifndef LIBBSP_BFIN_BF537STAMP_BSP_H
+#define LIBBSP_BFIN_BF537STAMP_BSP_H
+
+#ifndef ASM
+
+#include <bspopts.h>
+#include <bsp/default-initial-extension.h>
+
+#include <rtems.h>
+
+#include <libcpu/bf537.h>
+#include <libcpu/memoryRegs.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* configure data cache to use 16K of each SRAM bank when enabled */
+#define BSP_DATA_CACHE_CONFIG  (3 << DMEM_CONTROL_DMC_SHIFT)
+
+
+/*
+ * PLL and clock setup values:
+ */
+
+/*
+ *  PLL configuration for bf533Stamp
+ *
+ *  XTL   =  27 MHz
+ *  CLKIN =  13 MHz
+ *  VCO   = 391 MHz
+ *  CCLK  = 391 MHz
+ *  SCLK  = 130 MHz
+ */
+
+#define PLL_CSEL    0x0000      /* CCLK = VCO      */
+#define PLL_SSEL    0x0003      /* SCLK = CCLK/3   */
+#define PLL_MSEL    0x3A00      /* VCO = 29xCLKIN  */
+#define PLL_DF      0x0001      /* CLKIN = XTL/2   */
+
+#define CCLK        500000000   /* CORE CLOCK     */
+#define SCLK        100000000   /* SYSTEM CLOCK   */
+
+#define CONSOLE_FORCE_BAUD   57600
+
+/*
+ * Blackfin environment memory map
+ */
+#define L1_DATA_SRAM_A 0xff800000L
+
+#define FIFOLENGTH 0x100
+
+/*
+ *  Simple spin delay in microsecond units for device drivers.
+ *  This is very dependent on the clock speed of the target.
+ */
+
+#define rtems_bsp_delay( microseconds ) \
+  { \
+  }
+
+/* Constants */
+
+#define RAM_START 0
+#define RAM_END   0x4000000
+
+/* functions */
+
+/*
+ * Helper Function to use the EzKits LEDS.
+ * Can be used by the Application.
+ */
+void setLED(uint8_t value);
+
+/*
+ * Helper Function to use the EzKits LEDS
+ */
+uint8_t getLEDs(void);
+void setLEDs(uint8_t value);
+uint8_t getButtons(void);
+
+rtems_isr_entry set_vector(                     /* returns old vector */
+  rtems_isr_entry     handler,                  /* isr routine        */
+  rtems_vector_number vector,                   /* vector number      */
+  int                 type                      /* RTEMS or RAW intr  */
+);
+
+/*
+ *  Internal BSP methods that are used across file boundaries
+ */
+void Init_RTC(void);
+
+/*
+ * Network driver configuration
+ */
+struct rtems_bsdnet_ifconfig;
+extern int bf537Stamp_network_driver_attach(struct rtems_bsdnet_ifconfig *, int);
+
+#define RTEMS_BSP_NETWORK_DRIVER_NAME   "eth1"
+#define RTEMS_BSP_NETWORK_DRIVER_ATTACH bf537Stamp_network_driver_attach
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* !ASM */
+
+#endif