diff options
Diffstat (limited to 'bsps/arm/stm32h7/include/stm32h7xx_hal_sd.h')
| -rw-r--r-- | bsps/arm/stm32h7/include/stm32h7xx_hal_sd.h | 1597 |
1 files changed, 800 insertions, 797 deletions
diff --git a/bsps/arm/stm32h7/include/stm32h7xx_hal_sd.h b/bsps/arm/stm32h7/include/stm32h7xx_hal_sd.h index caeff95153..8e4b8ac634 100644 --- a/bsps/arm/stm32h7/include/stm32h7xx_hal_sd.h +++ b/bsps/arm/stm32h7/include/stm32h7xx_hal_sd.h @@ -1,827 +1,830 @@ -/**
- ******************************************************************************
- * @file stm32h7xx_hal_sd.h
- * @author MCD Application Team
- * @brief Header file of SD HAL module.
- ******************************************************************************
- * @attention
- *
- * <h2><center>© Copyright (c) 2017 STMicroelectronics.
- * All rights reserved.</center></h2>
- *
- * This software component is licensed by ST under BSD 3-Clause license,
- * the "License"; You may not use this file except in compliance with the
- * License. You may obtain a copy of the License at:
- * opensource.org/licenses/BSD-3-Clause
- *
- ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef STM32H7xx_HAL_SD_H
-#define STM32H7xx_HAL_SD_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32h7xx_ll_sdmmc.h"
-#if defined (DLYB_SDMMC1) || defined (DLYB_SDMMC2) || defined (DLYB_SDMMC3)
-#include "stm32h7xx_ll_delayblock.h"
-#endif /* (DLYB_SDMMC1) || (DLYB_SDMMC2) */
-
-/** @addtogroup STM32H7xx_HAL_Driver
- * @{
- */
-
-/** @defgroup SD SD
+/** + ****************************************************************************** + * @file stm32h7xx_hal_sd.h + * @author MCD Application Team + * @brief Header file of SD HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_HAL_SD_H +#define STM32H7xx_HAL_SD_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_ll_sdmmc.h" +#if defined (DLYB_SDMMC1) || defined (DLYB_SDMMC2) || defined (DLYB_SDMMC3) +#include "stm32h7xx_ll_delayblock.h" +#endif /* (DLYB_SDMMC1) || (DLYB_SDMMC2) */ + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @defgroup SD SD * @ingroup RTEMSBSPsARMSTM32H7 - * @brief SD HAL module driver
- * @{
- */
-
-/* Exported types ------------------------------------------------------------*/
-/** @defgroup SD_Exported_Types SD Exported Types
+ * @brief SD HAL module driver + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup SD_Exported_Types SD Exported Types * @ingroup RTEMSBSPsARMSTM32H7 - * @{
- */
-
-/** @defgroup SD_Exported_Types_Group1 SD State enumeration structure
+ * @{ + */ + +/** @defgroup SD_Exported_Types_Group1 SD State enumeration structure * @ingroup RTEMSBSPsARMSTM32H7 - * @{
- */
-typedef enum
-{
- HAL_SD_STATE_RESET = ((uint32_t)0x00000000U), /*!< SD not yet initialized or disabled */
- HAL_SD_STATE_READY = ((uint32_t)0x00000001U), /*!< SD initialized and ready for use */
- HAL_SD_STATE_TIMEOUT = ((uint32_t)0x00000002U), /*!< SD Timeout state */
- HAL_SD_STATE_BUSY = ((uint32_t)0x00000003U), /*!< SD process ongoing */
- HAL_SD_STATE_PROGRAMMING = ((uint32_t)0x00000004U), /*!< SD Programming State */
- HAL_SD_STATE_RECEIVING = ((uint32_t)0x00000005U), /*!< SD Receiving State */
- HAL_SD_STATE_TRANSFER = ((uint32_t)0x00000006U), /*!< SD Transfert State */
- HAL_SD_STATE_ERROR = ((uint32_t)0x0000000FU) /*!< SD is in error state */
-}HAL_SD_StateTypeDef;
-/**
- * @}
- */
-
-/** @defgroup SD_Exported_Types_Group2 SD Card State enumeration structure
+ * @{ + */ +typedef enum +{ + HAL_SD_STATE_RESET = ((uint32_t)0x00000000U), /*!< SD not yet initialized or disabled */ + HAL_SD_STATE_READY = ((uint32_t)0x00000001U), /*!< SD initialized and ready for use */ + HAL_SD_STATE_TIMEOUT = ((uint32_t)0x00000002U), /*!< SD Timeout state */ + HAL_SD_STATE_BUSY = ((uint32_t)0x00000003U), /*!< SD process ongoing */ + HAL_SD_STATE_PROGRAMMING = ((uint32_t)0x00000004U), /*!< SD Programming State */ + HAL_SD_STATE_RECEIVING = ((uint32_t)0x00000005U), /*!< SD Receiving State */ + HAL_SD_STATE_TRANSFER = ((uint32_t)0x00000006U), /*!< SD Transfer State */ + HAL_SD_STATE_ERROR = ((uint32_t)0x0000000FU) /*!< SD is in error state */ +} HAL_SD_StateTypeDef; +/** + * @} + */ + +/** @defgroup SD_Exported_Types_Group2 SD Card State enumeration structure * @ingroup RTEMSBSPsARMSTM32H7 - * @{
- */
-typedef uint32_t HAL_SD_CardStateTypeDef;
-
-#define HAL_SD_CARD_READY 0x00000001U /*!< Card state is ready */
-#define HAL_SD_CARD_IDENTIFICATION 0x00000002U /*!< Card is in identification state */
-#define HAL_SD_CARD_STANDBY 0x00000003U /*!< Card is in standby state */
-#define HAL_SD_CARD_TRANSFER 0x00000004U /*!< Card is in transfer state */
-#define HAL_SD_CARD_SENDING 0x00000005U /*!< Card is sending an operation */
-#define HAL_SD_CARD_RECEIVING 0x00000006U /*!< Card is receiving operation information */
-#define HAL_SD_CARD_PROGRAMMING 0x00000007U /*!< Card is in programming state */
-#define HAL_SD_CARD_DISCONNECTED 0x00000008U /*!< Card is disconnected */
-#define HAL_SD_CARD_ERROR 0x000000FFU /*!< Card response Error */
-/**
- * @}
- */
-
-/** @defgroup SD_Exported_Types_Group3 SD Handle Structure definition
+ * @{ + */ +typedef uint32_t HAL_SD_CardStateTypeDef; + +#define HAL_SD_CARD_READY 0x00000001U /*!< Card state is ready */ +#define HAL_SD_CARD_IDENTIFICATION 0x00000002U /*!< Card is in identification state */ +#define HAL_SD_CARD_STANDBY 0x00000003U /*!< Card is in standby state */ +#define HAL_SD_CARD_TRANSFER 0x00000004U /*!< Card is in transfer state */ +#define HAL_SD_CARD_SENDING 0x00000005U /*!< Card is sending an operation */ +#define HAL_SD_CARD_RECEIVING 0x00000006U /*!< Card is receiving operation information */ +#define HAL_SD_CARD_PROGRAMMING 0x00000007U /*!< Card is in programming state */ +#define HAL_SD_CARD_DISCONNECTED 0x00000008U /*!< Card is disconnected */ +#define HAL_SD_CARD_ERROR 0x000000FFU /*!< Card response Error */ +/** + * @} + */ + +/** @defgroup SD_Exported_Types_Group3 SD Handle Structure definition * @ingroup RTEMSBSPsARMSTM32H7 - * @{
- */
-#define SD_InitTypeDef SDMMC_InitTypeDef
-#define SD_TypeDef SDMMC_TypeDef
-
-/**
- * @brief SD Card Information Structure definition
- */
-typedef struct
-{
- uint32_t CardType; /*!< Specifies the card Type */
-
- uint32_t CardVersion; /*!< Specifies the card version */
-
- uint32_t Class; /*!< Specifies the class of the card class */
-
- uint32_t RelCardAdd; /*!< Specifies the Relative Card Address */
-
- uint32_t BlockNbr; /*!< Specifies the Card Capacity in blocks */
-
- uint32_t BlockSize; /*!< Specifies one block size in bytes */
-
- uint32_t LogBlockNbr; /*!< Specifies the Card logical Capacity in blocks */
-
- uint32_t LogBlockSize; /*!< Specifies logical block size in bytes */
-
- uint32_t CardSpeed; /*!< Specifies the card Speed */
-
-}HAL_SD_CardInfoTypeDef;
-
-/**
- * @brief SD handle Structure definition
- */
-#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U)
-typedef struct __SD_HandleTypeDef
-#else
-typedef struct
-#endif /* USE_HAL_SD_REGISTER_CALLBACKS */
-{
- SD_TypeDef *Instance; /*!< SD registers base address */
-
- SD_InitTypeDef Init; /*!< SD required parameters */
-
- HAL_LockTypeDef Lock; /*!< SD locking object */
-
- uint8_t *pTxBuffPtr; /*!< Pointer to SD Tx transfer Buffer */
-
- uint32_t TxXferSize; /*!< SD Tx Transfer size */
-
- uint8_t *pRxBuffPtr; /*!< Pointer to SD Rx transfer Buffer */
-
- uint32_t RxXferSize; /*!< SD Rx Transfer size */
-
- __IO uint32_t Context; /*!< SD transfer context */
-
- __IO HAL_SD_StateTypeDef State; /*!< SD card State */
-
- __IO uint32_t ErrorCode; /*!< SD Card Error codes */
-
- HAL_SD_CardInfoTypeDef SdCard; /*!< SD Card information */
-
- uint32_t CSD[4]; /*!< SD card specific data table */
-
- uint32_t CID[4]; /*!< SD card identification number table */
-
-#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U)
- void (* TxCpltCallback) (struct __SD_HandleTypeDef *hsd);
- void (* RxCpltCallback) (struct __SD_HandleTypeDef *hsd);
- void (* ErrorCallback) (struct __SD_HandleTypeDef *hsd);
- void (* AbortCpltCallback) (struct __SD_HandleTypeDef *hsd);
- void (* Read_DMADblBuf0CpltCallback) (struct __SD_HandleTypeDef *hsd);
- void (* Read_DMADblBuf1CpltCallback) (struct __SD_HandleTypeDef *hsd);
- void (* Write_DMADblBuf0CpltCallback) (struct __SD_HandleTypeDef *hsd);
- void (* Write_DMADblBuf1CpltCallback) (struct __SD_HandleTypeDef *hsd);
-
-#if (USE_SD_TRANSCEIVER != 0U)
- void (* DriveTransceiver_1_8V_Callback) (FlagStatus status);
-#endif /* USE_SD_TRANSCEIVER */
-
- void (* MspInitCallback) (struct __SD_HandleTypeDef *hsd);
- void (* MspDeInitCallback) (struct __SD_HandleTypeDef *hsd);
-#endif /* USE_HAL_SD_REGISTER_CALLBACKS */
-}SD_HandleTypeDef;
-
-/**
- * @}
- */
-
-/** @defgroup SD_Exported_Types_Group4 Card Specific Data: CSD Register
+ * @{ + */ +#define SD_InitTypeDef SDMMC_InitTypeDef +#define SD_TypeDef SDMMC_TypeDef + +/** + * @brief SD Card Information Structure definition + */ +typedef struct +{ + uint32_t CardType; /*!< Specifies the card Type */ + + uint32_t CardVersion; /*!< Specifies the card version */ + + uint32_t Class; /*!< Specifies the class of the card class */ + + uint32_t RelCardAdd; /*!< Specifies the Relative Card Address */ + + uint32_t BlockNbr; /*!< Specifies the Card Capacity in blocks */ + + uint32_t BlockSize; /*!< Specifies one block size in bytes */ + + uint32_t LogBlockNbr; /*!< Specifies the Card logical Capacity in blocks */ + + uint32_t LogBlockSize; /*!< Specifies logical block size in bytes */ + + uint32_t CardSpeed; /*!< Specifies the card Speed */ + +} HAL_SD_CardInfoTypeDef; + +/** + * @brief SD handle Structure definition + */ +#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U) +typedef struct __SD_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_SD_REGISTER_CALLBACKS */ +{ + SD_TypeDef *Instance; /*!< SD registers base address */ + + SD_InitTypeDef Init; /*!< SD required parameters */ + + HAL_LockTypeDef Lock; /*!< SD locking object */ + + const uint8_t *pTxBuffPtr; /*!< Pointer to SD Tx transfer Buffer */ + + uint32_t TxXferSize; /*!< SD Tx Transfer size */ + + uint8_t *pRxBuffPtr; /*!< Pointer to SD Rx transfer Buffer */ + + uint32_t RxXferSize; /*!< SD Rx Transfer size */ + + __IO uint32_t Context; /*!< SD transfer context */ + + __IO HAL_SD_StateTypeDef State; /*!< SD card State */ + + __IO uint32_t ErrorCode; /*!< SD Card Error codes */ + + HAL_SD_CardInfoTypeDef SdCard; /*!< SD Card information */ + + uint32_t CSD[4]; /*!< SD card specific data table */ + + uint32_t CID[4]; /*!< SD card identification number table */ + +#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U) + void (* TxCpltCallback)(struct __SD_HandleTypeDef *hsd); + void (* RxCpltCallback)(struct __SD_HandleTypeDef *hsd); + void (* ErrorCallback)(struct __SD_HandleTypeDef *hsd); + void (* AbortCpltCallback)(struct __SD_HandleTypeDef *hsd); + void (* Read_DMADblBuf0CpltCallback)(struct __SD_HandleTypeDef *hsd); + void (* Read_DMADblBuf1CpltCallback)(struct __SD_HandleTypeDef *hsd); + void (* Write_DMADblBuf0CpltCallback)(struct __SD_HandleTypeDef *hsd); + void (* Write_DMADblBuf1CpltCallback)(struct __SD_HandleTypeDef *hsd); +#if (USE_SD_TRANSCEIVER != 0U) + void (* DriveTransceiver_1_8V_Callback)(FlagStatus status); +#endif /* USE_SD_TRANSCEIVER */ + + void (* MspInitCallback)(struct __SD_HandleTypeDef *hsd); + void (* MspDeInitCallback)(struct __SD_HandleTypeDef *hsd); +#endif /* USE_HAL_SD_REGISTER_CALLBACKS */ +} SD_HandleTypeDef; + +/** + * @} + */ + +/** @defgroup SD_Exported_Types_Group4 Card Specific Data: CSD Register * @ingroup RTEMSBSPsARMSTM32H7 - * @{
- */
-typedef struct
-{
- __IO uint8_t CSDStruct; /*!< CSD structure */
- __IO uint8_t SysSpecVersion; /*!< System specification version */
- __IO uint8_t Reserved1; /*!< Reserved */
- __IO uint8_t TAAC; /*!< Data read access time 1 */
- __IO uint8_t NSAC; /*!< Data read access time 2 in CLK cycles */
- __IO uint8_t MaxBusClkFrec; /*!< Max. bus clock frequency */
- __IO uint16_t CardComdClasses; /*!< Card command classes */
- __IO uint8_t RdBlockLen; /*!< Max. read data block length */
- __IO uint8_t PartBlockRead; /*!< Partial blocks for read allowed */
- __IO uint8_t WrBlockMisalign; /*!< Write block misalignment */
- __IO uint8_t RdBlockMisalign; /*!< Read block misalignment */
- __IO uint8_t DSRImpl; /*!< DSR implemented */
- __IO uint8_t Reserved2; /*!< Reserved */
- __IO uint32_t DeviceSize; /*!< Device Size */
- __IO uint8_t MaxRdCurrentVDDMin; /*!< Max. read current @ VDD min */
- __IO uint8_t MaxRdCurrentVDDMax; /*!< Max. read current @ VDD max */
- __IO uint8_t MaxWrCurrentVDDMin; /*!< Max. write current @ VDD min */
- __IO uint8_t MaxWrCurrentVDDMax; /*!< Max. write current @ VDD max */
- __IO uint8_t DeviceSizeMul; /*!< Device size multiplier */
- __IO uint8_t EraseGrSize; /*!< Erase group size */
- __IO uint8_t EraseGrMul; /*!< Erase group size multiplier */
- __IO uint8_t WrProtectGrSize; /*!< Write protect group size */
- __IO uint8_t WrProtectGrEnable; /*!< Write protect group enable */
- __IO uint8_t ManDeflECC; /*!< Manufacturer default ECC */
- __IO uint8_t WrSpeedFact; /*!< Write speed factor */
- __IO uint8_t MaxWrBlockLen; /*!< Max. write data block length */
- __IO uint8_t WriteBlockPaPartial; /*!< Partial blocks for write allowed */
- __IO uint8_t Reserved3; /*!< Reserved */
- __IO uint8_t ContentProtectAppli; /*!< Content protection application */
- __IO uint8_t FileFormatGroup; /*!< File format group */
- __IO uint8_t CopyFlag; /*!< Copy flag (OTP) */
- __IO uint8_t PermWrProtect; /*!< Permanent write protection */
- __IO uint8_t TempWrProtect; /*!< Temporary write protection */
- __IO uint8_t FileFormat; /*!< File format */
- __IO uint8_t ECC; /*!< ECC code */
- __IO uint8_t CSD_CRC; /*!< CSD CRC */
- __IO uint8_t Reserved4; /*!< Always 1 */
-}HAL_SD_CardCSDTypeDef;
-/**
- * @}
- */
-
-/** @defgroup SD_Exported_Types_Group5 Card Identification Data: CID Register
+ * @{ + */ +typedef struct +{ + __IO uint8_t CSDStruct; /*!< CSD structure */ + __IO uint8_t SysSpecVersion; /*!< System specification version */ + __IO uint8_t Reserved1; /*!< Reserved */ + __IO uint8_t TAAC; /*!< Data read access time 1 */ + __IO uint8_t NSAC; /*!< Data read access time 2 in CLK cycles */ + __IO uint8_t MaxBusClkFrec; /*!< Max. bus clock frequency */ + __IO uint16_t CardComdClasses; /*!< Card command classes */ + __IO uint8_t RdBlockLen; /*!< Max. read data block length */ + __IO uint8_t PartBlockRead; /*!< Partial blocks for read allowed */ + __IO uint8_t WrBlockMisalign; /*!< Write block misalignment */ + __IO uint8_t RdBlockMisalign; /*!< Read block misalignment */ + __IO uint8_t DSRImpl; /*!< DSR implemented */ + __IO uint8_t Reserved2; /*!< Reserved */ + __IO uint32_t DeviceSize; /*!< Device Size */ + __IO uint8_t MaxRdCurrentVDDMin; /*!< Max. read current @ VDD min */ + __IO uint8_t MaxRdCurrentVDDMax; /*!< Max. read current @ VDD max */ + __IO uint8_t MaxWrCurrentVDDMin; /*!< Max. write current @ VDD min */ + __IO uint8_t MaxWrCurrentVDDMax; /*!< Max. write current @ VDD max */ + __IO uint8_t DeviceSizeMul; /*!< Device size multiplier */ + __IO uint8_t EraseGrSize; /*!< Erase group size */ + __IO uint8_t EraseGrMul; /*!< Erase group size multiplier */ + __IO uint8_t WrProtectGrSize; /*!< Write protect group size */ + __IO uint8_t WrProtectGrEnable; /*!< Write protect group enable */ + __IO uint8_t ManDeflECC; /*!< Manufacturer default ECC */ + __IO uint8_t WrSpeedFact; /*!< Write speed factor */ + __IO uint8_t MaxWrBlockLen; /*!< Max. write data block length */ + __IO uint8_t WriteBlockPaPartial; /*!< Partial blocks for write allowed */ + __IO uint8_t Reserved3; /*!< Reserved */ + __IO uint8_t ContentProtectAppli; /*!< Content protection application */ + __IO uint8_t FileFormatGroup; /*!< File format group */ + __IO uint8_t CopyFlag; /*!< Copy flag (OTP) */ + __IO uint8_t PermWrProtect; /*!< Permanent write protection */ + __IO uint8_t TempWrProtect; /*!< Temporary write protection */ + __IO uint8_t FileFormat; /*!< File format */ + __IO uint8_t ECC; /*!< ECC code */ + __IO uint8_t CSD_CRC; /*!< CSD CRC */ + __IO uint8_t Reserved4; /*!< Always 1 */ +} HAL_SD_CardCSDTypeDef; +/** + * @} + */ + +/** @defgroup SD_Exported_Types_Group5 Card Identification Data: CID Register * @ingroup RTEMSBSPsARMSTM32H7 - * @{
- */
-typedef struct
-{
- __IO uint8_t ManufacturerID; /*!< Manufacturer ID */
- __IO uint16_t OEM_AppliID; /*!< OEM/Application ID */
- __IO uint32_t ProdName1; /*!< Product Name part1 */
- __IO uint8_t ProdName2; /*!< Product Name part2 */
- __IO uint8_t ProdRev; /*!< Product Revision */
- __IO uint32_t ProdSN; /*!< Product Serial Number */
- __IO uint8_t Reserved1; /*!< Reserved1 */
- __IO uint16_t ManufactDate; /*!< Manufacturing Date */
- __IO uint8_t CID_CRC; /*!< CID CRC */
- __IO uint8_t Reserved2; /*!< Always 1 */
-
-}HAL_SD_CardCIDTypeDef;
-/**
- * @}
- */
-
-/** @defgroup SD_Exported_Types_Group6 SD Card Status returned by ACMD13
+ * @{ + */ +typedef struct +{ + __IO uint8_t ManufacturerID; /*!< Manufacturer ID */ + __IO uint16_t OEM_AppliID; /*!< OEM/Application ID */ + __IO uint32_t ProdName1; /*!< Product Name part1 */ + __IO uint8_t ProdName2; /*!< Product Name part2 */ + __IO uint8_t ProdRev; /*!< Product Revision */ + __IO uint32_t ProdSN; /*!< Product Serial Number */ + __IO uint8_t Reserved1; /*!< Reserved1 */ + __IO uint16_t ManufactDate; /*!< Manufacturing Date */ + __IO uint8_t CID_CRC; /*!< CID CRC */ + __IO uint8_t Reserved2; /*!< Always 1 */ + +} HAL_SD_CardCIDTypeDef; +/** + * @} + */ + +/** @defgroup SD_Exported_Types_Group6 SD Card Status returned by ACMD13 * @ingroup RTEMSBSPsARMSTM32H7 - * @{
- */
-typedef struct
-{
- __IO uint8_t DataBusWidth; /*!< Shows the currently defined data bus width */
- __IO uint8_t SecuredMode; /*!< Card is in secured mode of operation */
- __IO uint16_t CardType; /*!< Carries information about card type */
- __IO uint32_t ProtectedAreaSize; /*!< Carries information about the capacity of protected area */
- __IO uint8_t SpeedClass; /*!< Carries information about the speed class of the card */
- __IO uint8_t PerformanceMove; /*!< Carries information about the card's performance move */
- __IO uint8_t AllocationUnitSize; /*!< Carries information about the card's allocation unit size */
- __IO uint16_t EraseSize; /*!< Determines the number of AUs to be erased in one operation */
- __IO uint8_t EraseTimeout; /*!< Determines the timeout for any number of AU erase */
- __IO uint8_t EraseOffset; /*!< Carries information about the erase offset */
- __IO uint8_t UhsSpeedGrade; /*!< Carries information about the speed grade of UHS card */
- __IO uint8_t UhsAllocationUnitSize; /*!< Carries information about the UHS card's allocation unit size */
- __IO uint8_t VideoSpeedClass; /*!< Carries information about the Video Speed Class of UHS card */
-}HAL_SD_CardStatusTypeDef;
-/**
- * @}
- */
-
-#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U)
-/** @defgroup SD_Exported_Types_Group7 SD Callback ID enumeration definition
+ * @{ + */ +typedef struct +{ + __IO uint8_t DataBusWidth; /*!< Shows the currently defined data bus width */ + __IO uint8_t SecuredMode; /*!< Card is in secured mode of operation */ + __IO uint16_t CardType; /*!< Carries information about card type */ + __IO uint32_t ProtectedAreaSize; /*!< Carries information about the capacity of protected area */ + __IO uint8_t SpeedClass; /*!< Carries information about the speed class of the card */ + __IO uint8_t PerformanceMove; /*!< Carries information about the card's performance move */ + __IO uint8_t AllocationUnitSize; /*!< Carries information about the card's allocation unit size */ + __IO uint16_t EraseSize; /*!< Determines the number of AUs to be erased in one operation */ + __IO uint8_t EraseTimeout; /*!< Determines the timeout for any number of AU erase */ + __IO uint8_t EraseOffset; /*!< Carries information about the erase offset */ + __IO uint8_t UhsSpeedGrade; /*!< Carries information about the speed grade of UHS card */ + __IO uint8_t UhsAllocationUnitSize; /*!< Carries information about the UHS card's allocation unit size */ + __IO uint8_t VideoSpeedClass; /*!< Carries information about the Video Speed Class of UHS card */ +} HAL_SD_CardStatusTypeDef; +/** + * @} + */ + +#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U) +/** @defgroup SD_Exported_Types_Group7 SD Callback ID enumeration definition * @ingroup RTEMSBSPsARMSTM32H7 - * @{
- */
-typedef enum
-{
- HAL_SD_TX_CPLT_CB_ID = 0x00U, /*!< SD Tx Complete Callback ID */
- HAL_SD_RX_CPLT_CB_ID = 0x01U, /*!< SD Rx Complete Callback ID */
- HAL_SD_ERROR_CB_ID = 0x02U, /*!< SD Error Callback ID */
- HAL_SD_ABORT_CB_ID = 0x03U, /*!< SD Abort Callback ID */
- HAL_SD_READ_DMA_DBL_BUF0_CPLT_CB_ID = 0x04U, /*!< SD Rx DMA Double Buffer 0 Complete Callback ID */
- HAL_SD_READ_DMA_DBL_BUF1_CPLT_CB_ID = 0x05U, /*!< SD Rx DMA Double Buffer 1 Complete Callback ID */
- HAL_SD_WRITE_DMA_DBL_BUF0_CPLT_CB_ID = 0x06U, /*!< SD Tx DMA Double Buffer 0 Complete Callback ID */
- HAL_SD_WRITE_DMA_DBL_BUF1_CPLT_CB_ID = 0x07U, /*!< SD Tx DMA Double Buffer 1 Complete Callback ID */
-
- HAL_SD_MSP_INIT_CB_ID = 0x10U, /*!< SD MspInit Callback ID */
- HAL_SD_MSP_DEINIT_CB_ID = 0x11U /*!< SD MspDeInit Callback ID */
-}HAL_SD_CallbackIDTypeDef;
-/**
- * @}
- */
-
-/** @defgroup SD_Exported_Types_Group8 SD Callback pointer definition
+ * @{ + */ +typedef enum +{ + HAL_SD_TX_CPLT_CB_ID = 0x00U, /*!< SD Tx Complete Callback ID */ + HAL_SD_RX_CPLT_CB_ID = 0x01U, /*!< SD Rx Complete Callback ID */ + HAL_SD_ERROR_CB_ID = 0x02U, /*!< SD Error Callback ID */ + HAL_SD_ABORT_CB_ID = 0x03U, /*!< SD Abort Callback ID */ + HAL_SD_READ_DMA_DBL_BUF0_CPLT_CB_ID = 0x04U, /*!< SD Rx DMA Double Buffer 0 Complete Callback ID */ + HAL_SD_READ_DMA_DBL_BUF1_CPLT_CB_ID = 0x05U, /*!< SD Rx DMA Double Buffer 1 Complete Callback ID */ + HAL_SD_WRITE_DMA_DBL_BUF0_CPLT_CB_ID = 0x06U, /*!< SD Tx DMA Double Buffer 0 Complete Callback ID */ + HAL_SD_WRITE_DMA_DBL_BUF1_CPLT_CB_ID = 0x07U, /*!< SD Tx DMA Double Buffer 1 Complete Callback ID */ + + HAL_SD_MSP_INIT_CB_ID = 0x10U, /*!< SD MspInit Callback ID */ + HAL_SD_MSP_DEINIT_CB_ID = 0x11U /*!< SD MspDeInit Callback ID */ +} HAL_SD_CallbackIDTypeDef; +/** + * @} + */ + +/** @defgroup SD_Exported_Types_Group8 SD Callback pointer definition * @ingroup RTEMSBSPsARMSTM32H7 - * @{
- */
-typedef void (*pSD_CallbackTypeDef) (SD_HandleTypeDef *hsd);
-#if (USE_SD_TRANSCEIVER != 0U)
-typedef void (*pSD_TransceiverCallbackTypeDef)(FlagStatus status);
-#endif /* USE_SD_TRANSCEIVER */
-/**
- * @}
- */
-#endif /* USE_HAL_SD_REGISTER_CALLBACKS */
-/**
- * @}
- */
-
-/* Exported constants --------------------------------------------------------*/
-/** @defgroup SD_Exported_Constants Exported Constants
+ * @{ + */ +typedef void (*pSD_CallbackTypeDef)(SD_HandleTypeDef *hsd); +#if (USE_SD_TRANSCEIVER != 0U) +typedef void (*pSD_TransceiverCallbackTypeDef)(FlagStatus status); +#endif /* USE_SD_TRANSCEIVER */ +/** + * @} + */ +#endif /* USE_HAL_SD_REGISTER_CALLBACKS */ +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup SD_Exported_Constants SD Exported Constants * @ingroup RTEMSBSPsARMSTM32H7 - * @{
- */
-
-#define BLOCKSIZE ((uint32_t)512U) /*!< Block size is 512 bytes */
-
-/** @defgroup SD_Exported_Constansts_Group1 SD Error status enumeration Structure definition
+ * @{ + */ + +#define BLOCKSIZE ((uint32_t)512U) /*!< Block size is 512 bytes */ + +/** @defgroup SD_Exported_Constansts_Group1 SD Error status enumeration Structure definition * @ingroup RTEMSBSPsARMSTM32H7 - * @{
- */
-#define HAL_SD_ERROR_NONE SDMMC_ERROR_NONE /*!< No error */
-#define HAL_SD_ERROR_CMD_CRC_FAIL SDMMC_ERROR_CMD_CRC_FAIL /*!< Command response received (but CRC check failed) */
-#define HAL_SD_ERROR_DATA_CRC_FAIL SDMMC_ERROR_DATA_CRC_FAIL /*!< Data block sent/received (CRC check failed) */
-#define HAL_SD_ERROR_CMD_RSP_TIMEOUT SDMMC_ERROR_CMD_RSP_TIMEOUT /*!< Command response timeout */
-#define HAL_SD_ERROR_DATA_TIMEOUT SDMMC_ERROR_DATA_TIMEOUT /*!< Data timeout */
-#define HAL_SD_ERROR_TX_UNDERRUN SDMMC_ERROR_TX_UNDERRUN /*!< Transmit FIFO underrun */
-#define HAL_SD_ERROR_RX_OVERRUN SDMMC_ERROR_RX_OVERRUN /*!< Receive FIFO overrun */
-#define HAL_SD_ERROR_ADDR_MISALIGNED SDMMC_ERROR_ADDR_MISALIGNED /*!< Misaligned address */
-#define HAL_SD_ERROR_BLOCK_LEN_ERR SDMMC_ERROR_BLOCK_LEN_ERR /*!< Transferred block length is not allowed for the card or the
- number of transferred bytes does not match the block length */
-#define HAL_SD_ERROR_ERASE_SEQ_ERR SDMMC_ERROR_ERASE_SEQ_ERR /*!< An error in the sequence of erase command occurs */
-#define HAL_SD_ERROR_BAD_ERASE_PARAM SDMMC_ERROR_BAD_ERASE_PARAM /*!< An invalid selection for erase groups */
-#define HAL_SD_ERROR_WRITE_PROT_VIOLATION SDMMC_ERROR_WRITE_PROT_VIOLATION /*!< Attempt to program a write protect block */
-#define HAL_SD_ERROR_LOCK_UNLOCK_FAILED SDMMC_ERROR_LOCK_UNLOCK_FAILED /*!< Sequence or password error has been detected in unlock
- command or if there was an attempt to access a locked card */
-#define HAL_SD_ERROR_COM_CRC_FAILED SDMMC_ERROR_COM_CRC_FAILED /*!< CRC check of the previous command failed */
-#define HAL_SD_ERROR_ILLEGAL_CMD SDMMC_ERROR_ILLEGAL_CMD /*!< Command is not legal for the card state */
-#define HAL_SD_ERROR_CARD_ECC_FAILED SDMMC_ERROR_CARD_ECC_FAILED /*!< Card internal ECC was applied but failed to correct the data */
-#define HAL_SD_ERROR_CC_ERR SDMMC_ERROR_CC_ERR /*!< Internal card controller error */
-#define HAL_SD_ERROR_GENERAL_UNKNOWN_ERR SDMMC_ERROR_GENERAL_UNKNOWN_ERR /*!< General or unknown error */
-#define HAL_SD_ERROR_STREAM_READ_UNDERRUN SDMMC_ERROR_STREAM_READ_UNDERRUN /*!< The card could not sustain data reading in stream rmode */
-#define HAL_SD_ERROR_STREAM_WRITE_OVERRUN SDMMC_ERROR_STREAM_WRITE_OVERRUN /*!< The card could not sustain data programming in stream mode */
-#define HAL_SD_ERROR_CID_CSD_OVERWRITE SDMMC_ERROR_CID_CSD_OVERWRITE /*!< CID/CSD overwrite error */
-#define HAL_SD_ERROR_WP_ERASE_SKIP SDMMC_ERROR_WP_ERASE_SKIP /*!< Only partial address space was erased */
-#define HAL_SD_ERROR_CARD_ECC_DISABLED SDMMC_ERROR_CARD_ECC_DISABLED /*!< Command has been executed without using internal ECC */
-#define HAL_SD_ERROR_ERASE_RESET SDMMC_ERROR_ERASE_RESET /*!< Erase sequence was cleared before executing because an out
- of erase sequence command was received */
-#define HAL_SD_ERROR_AKE_SEQ_ERR SDMMC_ERROR_AKE_SEQ_ERR /*!< Error in sequence of authentication */
-#define HAL_SD_ERROR_INVALID_VOLTRANGE SDMMC_ERROR_INVALID_VOLTRANGE /*!< Error in case of invalid voltage range */
-#define HAL_SD_ERROR_ADDR_OUT_OF_RANGE SDMMC_ERROR_ADDR_OUT_OF_RANGE /*!< Error when addressed block is out of range */
-#define HAL_SD_ERROR_REQUEST_NOT_APPLICABLE SDMMC_ERROR_REQUEST_NOT_APPLICABLE /*!< Error when command request is not applicable */
-#define HAL_SD_ERROR_PARAM SDMMC_ERROR_INVALID_PARAMETER /*!< the used parameter is not valid */
-#define HAL_SD_ERROR_UNSUPPORTED_FEATURE SDMMC_ERROR_UNSUPPORTED_FEATURE /*!< Error when feature is not insupported */
-#define HAL_SD_ERROR_BUSY SDMMC_ERROR_BUSY /*!< Error when transfer process is busy */
-#define HAL_SD_ERROR_DMA SDMMC_ERROR_DMA /*!< Error while DMA transfer */
-#define HAL_SD_ERROR_TIMEOUT SDMMC_ERROR_TIMEOUT /*!< Timeout error */
-
-#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U)
-#define HAL_SD_ERROR_INVALID_CALLBACK SDMMC_ERROR_INVALID_PARAMETER /*!< Invalid callback error */
-#endif /* USE_HAL_SD_REGISTER_CALLBACKS */
-/**
- * @}
- */
-
-/** @defgroup SD_Exported_Constansts_Group2 SD context enumeration
+ * @{ + */ +#define HAL_SD_ERROR_NONE SDMMC_ERROR_NONE /*!< No error */ +#define HAL_SD_ERROR_CMD_CRC_FAIL SDMMC_ERROR_CMD_CRC_FAIL /*!< Command response received (but CRC check failed) */ +#define HAL_SD_ERROR_DATA_CRC_FAIL SDMMC_ERROR_DATA_CRC_FAIL /*!< Data block sent/received (CRC check failed) */ +#define HAL_SD_ERROR_CMD_RSP_TIMEOUT SDMMC_ERROR_CMD_RSP_TIMEOUT /*!< Command response timeout */ +#define HAL_SD_ERROR_DATA_TIMEOUT SDMMC_ERROR_DATA_TIMEOUT /*!< Data timeout */ +#define HAL_SD_ERROR_TX_UNDERRUN SDMMC_ERROR_TX_UNDERRUN /*!< Transmit FIFO underrun */ +#define HAL_SD_ERROR_RX_OVERRUN SDMMC_ERROR_RX_OVERRUN /*!< Receive FIFO overrun */ +#define HAL_SD_ERROR_ADDR_MISALIGNED SDMMC_ERROR_ADDR_MISALIGNED /*!< Misaligned address */ +#define HAL_SD_ERROR_BLOCK_LEN_ERR SDMMC_ERROR_BLOCK_LEN_ERR /*!< Transferred block length is not allowed for the card or the */ + /*!< number of transferred bytes does not match the block length */ +#define HAL_SD_ERROR_ERASE_SEQ_ERR SDMMC_ERROR_ERASE_SEQ_ERR /*!< An error in the sequence of erase command occurs */ +#define HAL_SD_ERROR_BAD_ERASE_PARAM SDMMC_ERROR_BAD_ERASE_PARAM /*!< An invalid selection for erase groups */ +#define HAL_SD_ERROR_WRITE_PROT_VIOLATION SDMMC_ERROR_WRITE_PROT_VIOLATION /*!< Attempt to program a write protect block */ +#define HAL_SD_ERROR_LOCK_UNLOCK_FAILED SDMMC_ERROR_LOCK_UNLOCK_FAILED /*!< Sequence or password error has been detected in unlock */ + /*!< command or if there was an attempt to access a locked card */ +#define HAL_SD_ERROR_COM_CRC_FAILED SDMMC_ERROR_COM_CRC_FAILED /*!< CRC check of the previous command failed */ +#define HAL_SD_ERROR_ILLEGAL_CMD SDMMC_ERROR_ILLEGAL_CMD /*!< Command is not legal for the card state */ +#define HAL_SD_ERROR_CARD_ECC_FAILED SDMMC_ERROR_CARD_ECC_FAILED /*!< Card internal ECC was applied but failed to correct the data */ +#define HAL_SD_ERROR_CC_ERR SDMMC_ERROR_CC_ERR /*!< Internal card controller error */ +#define HAL_SD_ERROR_GENERAL_UNKNOWN_ERR SDMMC_ERROR_GENERAL_UNKNOWN_ERR /*!< General or unknown error */ +#define HAL_SD_ERROR_STREAM_READ_UNDERRUN SDMMC_ERROR_STREAM_READ_UNDERRUN /*!< The card could not sustain data reading in stream rmode */ +#define HAL_SD_ERROR_STREAM_WRITE_OVERRUN SDMMC_ERROR_STREAM_WRITE_OVERRUN /*!< The card could not sustain data programming in stream mode */ +#define HAL_SD_ERROR_CID_CSD_OVERWRITE SDMMC_ERROR_CID_CSD_OVERWRITE /*!< CID/CSD overwrite error */ +#define HAL_SD_ERROR_WP_ERASE_SKIP SDMMC_ERROR_WP_ERASE_SKIP /*!< Only partial address space was erased */ +#define HAL_SD_ERROR_CARD_ECC_DISABLED SDMMC_ERROR_CARD_ECC_DISABLED /*!< Command has been executed without using internal ECC */ +#define HAL_SD_ERROR_ERASE_RESET SDMMC_ERROR_ERASE_RESET /*!< Erase sequence was cleared before executing because an out */ + /*!< of erase sequence command was received */ +#define HAL_SD_ERROR_AKE_SEQ_ERR SDMMC_ERROR_AKE_SEQ_ERR /*!< Error in sequence of authentication */ +#define HAL_SD_ERROR_INVALID_VOLTRANGE SDMMC_ERROR_INVALID_VOLTRANGE /*!< Error in case of invalid voltage range */ +#define HAL_SD_ERROR_ADDR_OUT_OF_RANGE SDMMC_ERROR_ADDR_OUT_OF_RANGE /*!< Error when addressed block is out of range */ +#define HAL_SD_ERROR_REQUEST_NOT_APPLICABLE SDMMC_ERROR_REQUEST_NOT_APPLICABLE /*!< Error when command request is not applicable */ +#define HAL_SD_ERROR_PARAM SDMMC_ERROR_INVALID_PARAMETER /*!< the used parameter is not valid */ +#define HAL_SD_ERROR_UNSUPPORTED_FEATURE SDMMC_ERROR_UNSUPPORTED_FEATURE /*!< Error when feature is not insupported */ +#define HAL_SD_ERROR_BUSY SDMMC_ERROR_BUSY /*!< Error when transfer process is busy */ +#define HAL_SD_ERROR_DMA SDMMC_ERROR_DMA /*!< Error while DMA transfer */ +#define HAL_SD_ERROR_TIMEOUT SDMMC_ERROR_TIMEOUT /*!< Timeout error */ + +#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U) +#define HAL_SD_ERROR_INVALID_CALLBACK SDMMC_ERROR_INVALID_PARAMETER /*!< Invalid callback error */ +#endif /* USE_HAL_SD_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @defgroup SD_Exported_Constansts_Group2 SD context enumeration * @ingroup RTEMSBSPsARMSTM32H7 - * @{
- */
-#define SD_CONTEXT_NONE ((uint32_t)0x00000000U) /*!< None */
-#define SD_CONTEXT_READ_SINGLE_BLOCK ((uint32_t)0x00000001U) /*!< Read single block operation */
-#define SD_CONTEXT_READ_MULTIPLE_BLOCK ((uint32_t)0x00000002U) /*!< Read multiple blocks operation */
-#define SD_CONTEXT_WRITE_SINGLE_BLOCK ((uint32_t)0x00000010U) /*!< Write single block operation */
-#define SD_CONTEXT_WRITE_MULTIPLE_BLOCK ((uint32_t)0x00000020U) /*!< Write multiple blocks operation */
-#define SD_CONTEXT_IT ((uint32_t)0x00000008U) /*!< Process in Interrupt mode */
-#define SD_CONTEXT_DMA ((uint32_t)0x00000080U) /*!< Process in DMA mode */
-
-/**
- * @}
- */
-
-/** @defgroup SD_Exported_Constansts_Group3 SD Supported Memory Cards
+ * @{ + */ +#define SD_CONTEXT_NONE ((uint32_t)0x00000000U) /*!< None */ +#define SD_CONTEXT_READ_SINGLE_BLOCK ((uint32_t)0x00000001U) /*!< Read single block operation */ +#define SD_CONTEXT_READ_MULTIPLE_BLOCK ((uint32_t)0x00000002U) /*!< Read multiple blocks operation */ +#define SD_CONTEXT_WRITE_SINGLE_BLOCK ((uint32_t)0x00000010U) /*!< Write single block operation */ +#define SD_CONTEXT_WRITE_MULTIPLE_BLOCK ((uint32_t)0x00000020U) /*!< Write multiple blocks operation */ +#define SD_CONTEXT_IT ((uint32_t)0x00000008U) /*!< Process in Interrupt mode */ +#define SD_CONTEXT_DMA ((uint32_t)0x00000080U) /*!< Process in DMA mode */ + +/** + * @} + */ + +/** @defgroup SD_Exported_Constansts_Group3 SD Supported Memory Cards * @ingroup RTEMSBSPsARMSTM32H7 - * @{
- */
-#define CARD_NORMAL_SPEED ((uint32_t)0x00000000U) /*!< Normal Speed Card <12.5Mo/s , Spec Version 1.01 */
-#define CARD_HIGH_SPEED ((uint32_t)0x00000100U) /*!< High Speed Card <25Mo/s , Spec version 2.00 */
-#define CARD_ULTRA_HIGH_SPEED ((uint32_t)0x00000200U) /*!< UHS-I SD Card <50Mo/s for SDR50, DDR5 Cards
- and <104Mo/s for SDR104, Spec version 3.01 */
-
-#define CARD_SDSC ((uint32_t)0x00000000U) /*!< SD Standard Capacity <2Go */
-#define CARD_SDHC_SDXC ((uint32_t)0x00000001U) /*!< SD High Capacity <32Go, SD Extended Capacity <2To */
-#define CARD_SECURED ((uint32_t)0x00000003U)
-
-/**
- * @}
- */
-
-/** @defgroup SD_Exported_Constansts_Group4 SD Supported Version
+ * @{ + */ +#define CARD_NORMAL_SPEED ((uint32_t)0x00000000U) /*!< Normal Speed Card <12.5Mo/s , Spec Version 1.01 */ +#define CARD_HIGH_SPEED ((uint32_t)0x00000100U) /*!< High Speed Card <25Mo/s , Spec version 2.00 */ +#define CARD_ULTRA_HIGH_SPEED ((uint32_t)0x00000200U) /*!< UHS-I SD Card <50Mo/s for SDR50, DDR5 Cards + and <104Mo/s for SDR104, Spec version 3.01 */ + +#define CARD_SDSC ((uint32_t)0x00000000U) /*!< SD Standard Capacity <2Go */ +#define CARD_SDHC_SDXC ((uint32_t)0x00000001U) /*!< SD High Capacity <32Go, SD Extended Capacity <2To */ +#define CARD_SECURED ((uint32_t)0x00000003U) + +/** + * @} + */ + +/** @defgroup SD_Exported_Constansts_Group4 SD Supported Version * @ingroup RTEMSBSPsARMSTM32H7 - * @{
- */
-#define CARD_V1_X ((uint32_t)0x00000000U)
-#define CARD_V2_X ((uint32_t)0x00000001U)
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/* Exported macro ------------------------------------------------------------*/
-/** @defgroup SD_Exported_macros SD Exported Macros
+ * @{ + */ +#define CARD_V1_X ((uint32_t)0x00000000U) +#define CARD_V2_X ((uint32_t)0x00000001U) +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup SD_Exported_macros SD Exported Macros * @ingroup RTEMSBSPsARMSTM32H7 - * @brief macros to handle interrupts and specific clock configurations
- * @{
- */
-/** @brief Reset SD handle state.
- * @param __HANDLE__ SD Handle.
- * @retval None
- */
-#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U)
-#define __HAL_SD_RESET_HANDLE_STATE(__HANDLE__) do { \
- (__HANDLE__)->State = HAL_SD_STATE_RESET; \
- (__HANDLE__)->MspInitCallback = NULL; \
- (__HANDLE__)->MspDeInitCallback = NULL; \
- } while(0)
-#else
-#define __HAL_SD_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SD_STATE_RESET)
-#endif /* USE_HAL_SD_REGISTER_CALLBACKS */
-
-/**
- * @brief Enable the SD device interrupt.
- * @param __HANDLE__ SD Handle.
- * @param __INTERRUPT__ specifies the SDMMC interrupt sources to be enabled.
- * This parameter can be one or a combination of the following values:
- * @arg SDMMC_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
- * @arg SDMMC_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
- * @arg SDMMC_IT_CTIMEOUT: Command response timeout interrupt
- * @arg SDMMC_IT_DTIMEOUT: Data timeout interrupt
- * @arg SDMMC_IT_TXUNDERR: Transmit FIFO underrun error interrupt
- * @arg SDMMC_IT_RXOVERR: Received FIFO overrun error interrupt
- * @arg SDMMC_IT_CMDREND: Command response received (CRC check passed) interrupt
- * @arg SDMMC_IT_CMDSENT: Command sent (no response required) interrupt
- * @arg SDMMC_IT_DATAEND: Data end (data counter, DATACOUNT, is zero) interrupt
- * @arg SDMMC_IT_DHOLD: Data transfer Hold interrupt
- * @arg SDMMC_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt
- * @arg SDMMC_IT_DABORT: Data transfer aborted by CMD12 interrupt
- * @arg SDMMC_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
- * @arg SDMMC_IT_RXFIFOHF: Receive FIFO Half Full interrupt
- * @arg SDMMC_IT_RXFIFOF: Receive FIFO full interrupt
- * @arg SDMMC_IT_TXFIFOE: Transmit FIFO empty interrupt
- * @arg SDMMC_IT_BUSYD0END: End of SDMMC_D0 Busy following a CMD response detected interrupt
- * @arg SDMMC_IT_SDIOIT: SDIO interrupt received interrupt
- * @arg SDMMC_IT_ACKFAIL: Boot Acknowledgment received interrupt
- * @arg SDMMC_IT_ACKTIMEOUT: Boot Acknowledgment timeout interrupt
- * @arg SDMMC_IT_VSWEND: Voltage switch critical timing section completion interrupt
- * @arg SDMMC_IT_CKSTOP: SDMMC_CK stopped in Voltage switch procedure interrupt
- * @arg SDMMC_IT_IDMABTC: IDMA buffer transfer complete interrupt
- * @retval None
- */
-#define __HAL_SD_ENABLE_IT(__HANDLE__, __INTERRUPT__) __SDMMC_ENABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__))
-
-/**
- * @brief Disable the SD device interrupt.
- * @param __HANDLE__ SD Handle.
- * @param __INTERRUPT__ specifies the SDMMC interrupt sources to be disabled.
- * This parameter can be one or a combination of the following values:
- * @arg SDMMC_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
- * @arg SDMMC_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
- * @arg SDMMC_IT_CTIMEOUT: Command response timeout interrupt
- * @arg SDMMC_IT_DTIMEOUT: Data timeout interrupt
- * @arg SDMMC_IT_TXUNDERR: Transmit FIFO underrun error interrupt
- * @arg SDMMC_IT_RXOVERR: Received FIFO overrun error interrupt
- * @arg SDMMC_IT_CMDREND: Command response received (CRC check passed) interrupt
- * @arg SDMMC_IT_CMDSENT: Command sent (no response required) interrupt
- * @arg SDMMC_IT_DATAEND: Data end (data counter, DATACOUNT, is zero) interrupt
- * @arg SDMMC_IT_DHOLD: Data transfer Hold interrupt
- * @arg SDMMC_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt
- * @arg SDMMC_IT_DABORT: Data transfer aborted by CMD12 interrupt
- * @arg SDMMC_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
- * @arg SDMMC_IT_RXFIFOHF: Receive FIFO Half Full interrupt
- * @arg SDMMC_IT_RXFIFOF: Receive FIFO full interrupt
- * @arg SDMMC_IT_TXFIFOE: Transmit FIFO empty interrupt
- * @arg SDMMC_IT_BUSYD0END: End of SDMMC_D0 Busy following a CMD response detected interrupt
- * @arg SDMMC_IT_SDIOIT: SDIO interrupt received interrupt
- * @arg SDMMC_IT_ACKFAIL: Boot Acknowledgment received interrupt
- * @arg SDMMC_IT_ACKTIMEOUT: Boot Acknowledgment timeout interrupt
- * @arg SDMMC_IT_VSWEND: Voltage switch critical timing section completion interrupt
- * @arg SDMMC_IT_CKSTOP: SDMMC_CK stopped in Voltage switch procedure interrupt
- * @arg SDMMC_IT_IDMABTC: IDMA buffer transfer complete interrupt
- * @retval None
- */
-#define __HAL_SD_DISABLE_IT(__HANDLE__, __INTERRUPT__) __SDMMC_DISABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__))
-
-/**
- * @brief Check whether the specified SD flag is set or not.
- * @param __HANDLE__ SD Handle.
- * @param __FLAG__ specifies the flag to check.
- * This parameter can be one of the following values:
- * @arg SDMMC_FLAG_CCRCFAIL: Command response received (CRC check failed)
- * @arg SDMMC_FLAG_DCRCFAIL: Data block sent/received (CRC check failed)
- * @arg SDMMC_FLAG_CTIMEOUT: Command response timeout
- * @arg SDMMC_FLAG_DTIMEOUT: Data timeout
- * @arg SDMMC_FLAG_TXUNDERR: Transmit FIFO underrun error
- * @arg SDMMC_FLAG_RXOVERR: Received FIFO overrun error
- * @arg SDMMC_FLAG_CMDREND: Command response received (CRC check passed)
- * @arg SDMMC_FLAG_CMDSENT: Command sent (no response required)
- * @arg SDMMC_FLAG_DATAEND: Data end (data counter, DATACOUNT, is zero)
- * @arg SDMMC_FLAG_DHOLD: Data transfer Hold
- * @arg SDMMC_FLAG_DBCKEND: Data block sent/received (CRC check passed)
- * @arg SDMMC_FLAG_DABORT: Data transfer aborted by CMD12
- * @arg SDMMC_FLAG_DPSMACT: Data path state machine active
- * @arg SDMMC_FLAG_CPSMACT: Command path state machine active
- * @arg SDMMC_FLAG_TXFIFOHE: Transmit FIFO Half Empty
- * @arg SDMMC_FLAG_RXFIFOHF: Receive FIFO Half Full
- * @arg SDMMC_FLAG_TXFIFOF: Transmit FIFO full
- * @arg SDMMC_FLAG_RXFIFOF: Receive FIFO full
- * @arg SDMMC_FLAG_TXFIFOE: Transmit FIFO empty
- * @arg SDMMC_FLAG_RXFIFOE: Receive FIFO empty
- * @arg SDMMC_FLAG_BUSYD0: Inverted value of SDMMC_D0 line (Busy)
- * @arg SDMMC_FLAG_BUSYD0END: End of SDMMC_D0 Busy following a CMD response detected
- * @arg SDMMC_FLAG_SDIOIT: SDIO interrupt received
- * @arg SDMMC_FLAG_ACKFAIL: Boot Acknowledgment received
- * @arg SDMMC_FLAG_ACKTIMEOUT: Boot Acknowledgment timeout
- * @arg SDMMC_FLAG_VSWEND: Voltage switch critical timing section completion
- * @arg SDMMC_FLAG_CKSTOP: SDMMC_CK stopped in Voltage switch procedure
- * @arg SDMMC_FLAG_IDMATE: IDMA transfer error
- * @arg SDMMC_FLAG_IDMABTC: IDMA buffer transfer complete
- * @retval The new state of SD FLAG (SET or RESET).
- */
-#define __HAL_SD_GET_FLAG(__HANDLE__, __FLAG__) __SDMMC_GET_FLAG((__HANDLE__)->Instance, (__FLAG__))
-
-/**
- * @brief Clear the SD's pending flags.
- * @param __HANDLE__ SD Handle.
- * @param __FLAG__ specifies the flag to clear.
- * This parameter can be one or a combination of the following values:
- * @arg SDMMC_FLAG_CCRCFAIL: Command response received (CRC check failed)
- * @arg SDMMC_FLAG_DCRCFAIL: Data block sent/received (CRC check failed)
- * @arg SDMMC_FLAG_CTIMEOUT: Command response timeout
- * @arg SDMMC_FLAG_DTIMEOUT: Data timeout
- * @arg SDMMC_FLAG_TXUNDERR: Transmit FIFO underrun error
- * @arg SDMMC_FLAG_RXOVERR: Received FIFO overrun error
- * @arg SDMMC_FLAG_CMDREND: Command response received (CRC check passed)
- * @arg SDMMC_FLAG_CMDSENT: Command sent (no response required)
- * @arg SDMMC_FLAG_DATAEND: Data end (data counter, DATACOUNT, is zero)
- * @arg SDMMC_FLAG_DHOLD: Data transfer Hold
- * @arg SDMMC_FLAG_DBCKEND: Data block sent/received (CRC check passed)
- * @arg SDMMC_FLAG_DABORT: Data transfer aborted by CMD12
- * @arg SDMMC_FLAG_BUSYD0END: End of SDMMC_D0 Busy following a CMD response detected
- * @arg SDMMC_FLAG_SDIOIT: SDIO interrupt received
- * @arg SDMMC_FLAG_ACKFAIL: Boot Acknowledgment received
- * @arg SDMMC_FLAG_ACKTIMEOUT: Boot Acknowledgment timeout
- * @arg SDMMC_FLAG_VSWEND: Voltage switch critical timing section completion
- * @arg SDMMC_FLAG_CKSTOP: SDMMC_CK stopped in Voltage switch procedure
- * @arg SDMMC_FLAG_IDMATE: IDMA transfer error
- * @arg SDMMC_FLAG_IDMABTC: IDMA buffer transfer complete
- * @retval None
- */
-#define __HAL_SD_CLEAR_FLAG(__HANDLE__, __FLAG__) __SDMMC_CLEAR_FLAG((__HANDLE__)->Instance, (__FLAG__))
-
-/**
- * @brief Check whether the specified SD interrupt has occurred or not.
- * @param __HANDLE__ SD Handle.
- * @param __INTERRUPT__ specifies the SDMMC interrupt source to check.
- * This parameter can be one of the following values:
- * @arg SDMMC_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
- * @arg SDMMC_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
- * @arg SDMMC_IT_CTIMEOUT: Command response timeout interrupt
- * @arg SDMMC_IT_DTIMEOUT: Data timeout interrupt
- * @arg SDMMC_IT_TXUNDERR: Transmit FIFO underrun error interrupt
- * @arg SDMMC_IT_RXOVERR: Received FIFO overrun error interrupt
- * @arg SDMMC_IT_CMDREND: Command response received (CRC check passed) interrupt
- * @arg SDMMC_IT_CMDSENT: Command sent (no response required) interrupt
- * @arg SDMMC_IT_DATAEND: Data end (data counter, DATACOUNT, is zero) interrupt
- * @arg SDMMC_IT_DHOLD: Data transfer Hold interrupt
- * @arg SDMMC_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt
- * @arg SDMMC_IT_DABORT: Data transfer aborted by CMD12 interrupt
- * @arg SDMMC_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
- * @arg SDMMC_IT_RXFIFOHF: Receive FIFO Half Full interrupt
- * @arg SDMMC_IT_RXFIFOF: Receive FIFO full interrupt
- * @arg SDMMC_IT_TXFIFOE: Transmit FIFO empty interrupt
- * @arg SDMMC_IT_BUSYD0END: End of SDMMC_D0 Busy following a CMD response detected interrupt
- * @arg SDMMC_IT_SDIOIT: SDIO interrupt received interrupt
- * @arg SDMMC_IT_ACKFAIL: Boot Acknowledgment received interrupt
- * @arg SDMMC_IT_ACKTIMEOUT: Boot Acknowledgment timeout interrupt
- * @arg SDMMC_IT_VSWEND: Voltage switch critical timing section completion interrupt
- * @arg SDMMC_IT_CKSTOP: SDMMC_CK stopped in Voltage switch procedure interrupt
- * @arg SDMMC_IT_IDMABTC: IDMA buffer transfer complete interrupt
- * @retval The new state of SD IT (SET or RESET).
- */
-#define __HAL_SD_GET_IT(__HANDLE__, __INTERRUPT__) __SDMMC_GET_IT((__HANDLE__)->Instance, (__INTERRUPT__))
-
-/**
- * @brief Clear the SD's interrupt pending bits.
- * @param __HANDLE__ SD Handle.
- * @param __INTERRUPT__ specifies the interrupt pending bit to clear.
- * This parameter can be one or a combination of the following values:
- * @arg SDMMC_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
- * @arg SDMMC_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
- * @arg SDMMC_IT_CTIMEOUT: Command response timeout interrupt
- * @arg SDMMC_IT_DTIMEOUT: Data timeout interrupt
- * @arg SDMMC_IT_TXUNDERR: Transmit FIFO underrun error interrupt
- * @arg SDMMC_IT_RXOVERR: Received FIFO overrun error interrupt
- * @arg SDMMC_IT_CMDREND: Command response received (CRC check passed) interrupt
- * @arg SDMMC_IT_CMDSENT: Command sent (no response required) interrupt
- * @arg SDMMC_IT_DATAEND: Data end (data counter, DATACOUNT, is zero) interrupt
- * @arg SDMMC_IT_DHOLD: Data transfer Hold interrupt
- * @arg SDMMC_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt
- * @arg SDMMC_IT_DABORT: Data transfer aborted by CMD12 interrupt
- * @arg SDMMC_IT_BUSYD0END: End of SDMMC_D0 Busy following a CMD response detected interrupt
- * @arg SDMMC_IT_SDIOIT: SDIO interrupt received interrupt
- * @arg SDMMC_IT_ACKFAIL: Boot Acknowledgment received interrupt
- * @arg SDMMC_IT_ACKTIMEOUT: Boot Acknowledgment timeout interrupt
- * @arg SDMMC_IT_VSWEND: Voltage switch critical timing section completion interrupt
- * @arg SDMMC_IT_CKSTOP: SDMMC_CK stopped in Voltage switch procedure interrupt
- * @arg SDMMC_IT_IDMABTC: IDMA buffer transfer complete interrupt
- * @retval None
- */
-#define __HAL_SD_CLEAR_IT(__HANDLE__, __INTERRUPT__) __SDMMC_CLEAR_IT((__HANDLE__)->Instance, (__INTERRUPT__))
-
-/**
- * @}
- */
-
-/* Include SD HAL Extension module */
-#include "stm32h7xx_hal_sd_ex.h"
-
-/* Exported functions --------------------------------------------------------*/
-/** @defgroup SD_Exported_Functions SD Exported Functions
+ * @brief macros to handle interrupts and specific clock configurations + * @{ + */ +/** @brief Reset SD handle state. + * @param __HANDLE__ SD Handle. + * @retval None + */ +#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U) +#define __HAL_SD_RESET_HANDLE_STATE(__HANDLE__) do { \ + (__HANDLE__)->State = HAL_SD_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_SD_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SD_STATE_RESET) +#endif /* USE_HAL_SD_REGISTER_CALLBACKS */ + +/** + * @brief Enable the SD device interrupt. + * @param __HANDLE__ SD Handle. + * @param __INTERRUPT__ specifies the SDMMC interrupt sources to be enabled. + * This parameter can be one or a combination of the following values: + * @arg SDMMC_IT_CCRCFAIL: Command response received (CRC check failed) interrupt + * @arg SDMMC_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt + * @arg SDMMC_IT_CTIMEOUT: Command response timeout interrupt + * @arg SDMMC_IT_DTIMEOUT: Data timeout interrupt + * @arg SDMMC_IT_TXUNDERR: Transmit FIFO underrun error interrupt + * @arg SDMMC_IT_RXOVERR: Received FIFO overrun error interrupt + * @arg SDMMC_IT_CMDREND: Command response received (CRC check passed) interrupt + * @arg SDMMC_IT_CMDSENT: Command sent (no response required) interrupt + * @arg SDMMC_IT_DATAEND: Data end (data counter, DATACOUNT, is zero) interrupt + * @arg SDMMC_IT_DHOLD: Data transfer Hold interrupt + * @arg SDMMC_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt + * @arg SDMMC_IT_DABORT: Data transfer aborted by CMD12 interrupt + * @arg SDMMC_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt + * @arg SDMMC_IT_RXFIFOHF: Receive FIFO Half Full interrupt + * @arg SDMMC_IT_RXFIFOF: Receive FIFO full interrupt + * @arg SDMMC_IT_TXFIFOE: Transmit FIFO empty interrupt + * @arg SDMMC_IT_BUSYD0END: End of SDMMC_D0 Busy following a CMD response detected interrupt + * @arg SDMMC_IT_SDIOIT: SDIO interrupt received interrupt + * @arg SDMMC_IT_ACKFAIL: Boot Acknowledgment received interrupt + * @arg SDMMC_IT_ACKTIMEOUT: Boot Acknowledgment timeout interrupt + * @arg SDMMC_IT_VSWEND: Voltage switch critical timing section completion interrupt + * @arg SDMMC_IT_CKSTOP: SDMMC_CK stopped in Voltage switch procedure interrupt + * @arg SDMMC_IT_IDMABTC: IDMA buffer transfer complete interrupt + * @retval None + */ +#define __HAL_SD_ENABLE_IT(__HANDLE__, __INTERRUPT__) __SDMMC_ENABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__)) + +/** + * @brief Disable the SD device interrupt. + * @param __HANDLE__ SD Handle. + * @param __INTERRUPT__ specifies the SDMMC interrupt sources to be disabled. + * This parameter can be one or a combination of the following values: + * @arg SDMMC_IT_CCRCFAIL: Command response received (CRC check failed) interrupt + * @arg SDMMC_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt + * @arg SDMMC_IT_CTIMEOUT: Command response timeout interrupt + * @arg SDMMC_IT_DTIMEOUT: Data timeout interrupt + * @arg SDMMC_IT_TXUNDERR: Transmit FIFO underrun error interrupt + * @arg SDMMC_IT_RXOVERR: Received FIFO overrun error interrupt + * @arg SDMMC_IT_CMDREND: Command response received (CRC check passed) interrupt + * @arg SDMMC_IT_CMDSENT: Command sent (no response required) interrupt + * @arg SDMMC_IT_DATAEND: Data end (data counter, DATACOUNT, is zero) interrupt + * @arg SDMMC_IT_DHOLD: Data transfer Hold interrupt + * @arg SDMMC_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt + * @arg SDMMC_IT_DABORT: Data transfer aborted by CMD12 interrupt + * @arg SDMMC_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt + * @arg SDMMC_IT_RXFIFOHF: Receive FIFO Half Full interrupt + * @arg SDMMC_IT_RXFIFOF: Receive FIFO full interrupt + * @arg SDMMC_IT_TXFIFOE: Transmit FIFO empty interrupt + * @arg SDMMC_IT_BUSYD0END: End of SDMMC_D0 Busy following a CMD response detected interrupt + * @arg SDMMC_IT_SDIOIT: SDIO interrupt received interrupt + * @arg SDMMC_IT_ACKFAIL: Boot Acknowledgment received interrupt + * @arg SDMMC_IT_ACKTIMEOUT: Boot Acknowledgment timeout interrupt + * @arg SDMMC_IT_VSWEND: Voltage switch critical timing section completion interrupt + * @arg SDMMC_IT_CKSTOP: SDMMC_CK stopped in Voltage switch procedure interrupt + * @arg SDMMC_IT_IDMABTC: IDMA buffer transfer complete interrupt + * @retval None + */ +#define __HAL_SD_DISABLE_IT(__HANDLE__, __INTERRUPT__) __SDMMC_DISABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__)) + +/** + * @brief Check whether the specified SD flag is set or not. + * @param __HANDLE__ SD Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg SDMMC_FLAG_CCRCFAIL: Command response received (CRC check failed) + * @arg SDMMC_FLAG_DCRCFAIL: Data block sent/received (CRC check failed) + * @arg SDMMC_FLAG_CTIMEOUT: Command response timeout + * @arg SDMMC_FLAG_DTIMEOUT: Data timeout + * @arg SDMMC_FLAG_TXUNDERR: Transmit FIFO underrun error + * @arg SDMMC_FLAG_RXOVERR: Received FIFO overrun error + * @arg SDMMC_FLAG_CMDREND: Command response received (CRC check passed) + * @arg SDMMC_FLAG_CMDSENT: Command sent (no response required) + * @arg SDMMC_FLAG_DATAEND: Data end (data counter, DATACOUNT, is zero) + * @arg SDMMC_FLAG_DHOLD: Data transfer Hold + * @arg SDMMC_FLAG_DBCKEND: Data block sent/received (CRC check passed) + * @arg SDMMC_FLAG_DABORT: Data transfer aborted by CMD12 + * @arg SDMMC_FLAG_DPSMACT: Data path state machine active + * @arg SDMMC_FLAG_CPSMACT: Command path state machine active + * @arg SDMMC_FLAG_TXFIFOHE: Transmit FIFO Half Empty + * @arg SDMMC_FLAG_RXFIFOHF: Receive FIFO Half Full + * @arg SDMMC_FLAG_TXFIFOF: Transmit FIFO full + * @arg SDMMC_FLAG_RXFIFOF: Receive FIFO full + * @arg SDMMC_FLAG_TXFIFOE: Transmit FIFO empty + * @arg SDMMC_FLAG_RXFIFOE: Receive FIFO empty + * @arg SDMMC_FLAG_BUSYD0: Inverted value of SDMMC_D0 line (Busy) + * @arg SDMMC_FLAG_BUSYD0END: End of SDMMC_D0 Busy following a CMD response detected + * @arg SDMMC_FLAG_SDIOIT: SDIO interrupt received + * @arg SDMMC_FLAG_ACKFAIL: Boot Acknowledgment received + * @arg SDMMC_FLAG_ACKTIMEOUT: Boot Acknowledgment timeout + * @arg SDMMC_FLAG_VSWEND: Voltage switch critical timing section completion + * @arg SDMMC_FLAG_CKSTOP: SDMMC_CK stopped in Voltage switch procedure + * @arg SDMMC_FLAG_IDMATE: IDMA transfer error + * @arg SDMMC_FLAG_IDMABTC: IDMA buffer transfer complete + * @retval The new state of SD FLAG (SET or RESET). + */ +#define __HAL_SD_GET_FLAG(__HANDLE__, __FLAG__) __SDMMC_GET_FLAG((__HANDLE__)->Instance, (__FLAG__)) + +/** + * @brief Clear the SD's pending flags. + * @param __HANDLE__ SD Handle. + * @param __FLAG__ specifies the flag to clear. + * This parameter can be one or a combination of the following values: + * @arg SDMMC_FLAG_CCRCFAIL: Command response received (CRC check failed) + * @arg SDMMC_FLAG_DCRCFAIL: Data block sent/received (CRC check failed) + * @arg SDMMC_FLAG_CTIMEOUT: Command response timeout + * @arg SDMMC_FLAG_DTIMEOUT: Data timeout + * @arg SDMMC_FLAG_TXUNDERR: Transmit FIFO underrun error + * @arg SDMMC_FLAG_RXOVERR: Received FIFO overrun error + * @arg SDMMC_FLAG_CMDREND: Command response received (CRC check passed) + * @arg SDMMC_FLAG_CMDSENT: Command sent (no response required) + * @arg SDMMC_FLAG_DATAEND: Data end (data counter, DATACOUNT, is zero) + * @arg SDMMC_FLAG_DHOLD: Data transfer Hold + * @arg SDMMC_FLAG_DBCKEND: Data block sent/received (CRC check passed) + * @arg SDMMC_FLAG_DABORT: Data transfer aborted by CMD12 + * @arg SDMMC_FLAG_BUSYD0END: End of SDMMC_D0 Busy following a CMD response detected + * @arg SDMMC_FLAG_SDIOIT: SDIO interrupt received + * @arg SDMMC_FLAG_ACKFAIL: Boot Acknowledgment received + * @arg SDMMC_FLAG_ACKTIMEOUT: Boot Acknowledgment timeout + * @arg SDMMC_FLAG_VSWEND: Voltage switch critical timing section completion + * @arg SDMMC_FLAG_CKSTOP: SDMMC_CK stopped in Voltage switch procedure + * @arg SDMMC_FLAG_IDMATE: IDMA transfer error + * @arg SDMMC_FLAG_IDMABTC: IDMA buffer transfer complete + * @retval None + */ +#define __HAL_SD_CLEAR_FLAG(__HANDLE__, __FLAG__) __SDMMC_CLEAR_FLAG((__HANDLE__)->Instance, (__FLAG__)) + +/** + * @brief Check whether the specified SD interrupt has occurred or not. + * @param __HANDLE__ SD Handle. + * @param __INTERRUPT__ specifies the SDMMC interrupt source to check. + * This parameter can be one of the following values: + * @arg SDMMC_IT_CCRCFAIL: Command response received (CRC check failed) interrupt + * @arg SDMMC_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt + * @arg SDMMC_IT_CTIMEOUT: Command response timeout interrupt + * @arg SDMMC_IT_DTIMEOUT: Data timeout interrupt + * @arg SDMMC_IT_TXUNDERR: Transmit FIFO underrun error interrupt + * @arg SDMMC_IT_RXOVERR: Received FIFO overrun error interrupt + * @arg SDMMC_IT_CMDREND: Command response received (CRC check passed) interrupt + * @arg SDMMC_IT_CMDSENT: Command sent (no response required) interrupt + * @arg SDMMC_IT_DATAEND: Data end (data counter, DATACOUNT, is zero) interrupt + * @arg SDMMC_IT_DHOLD: Data transfer Hold interrupt + * @arg SDMMC_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt + * @arg SDMMC_IT_DABORT: Data transfer aborted by CMD12 interrupt + * @arg SDMMC_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt + * @arg SDMMC_IT_RXFIFOHF: Receive FIFO Half Full interrupt + * @arg SDMMC_IT_RXFIFOF: Receive FIFO full interrupt + * @arg SDMMC_IT_TXFIFOE: Transmit FIFO empty interrupt + * @arg SDMMC_IT_BUSYD0END: End of SDMMC_D0 Busy following a CMD response detected interrupt + * @arg SDMMC_IT_SDIOIT: SDIO interrupt received interrupt + * @arg SDMMC_IT_ACKFAIL: Boot Acknowledgment received interrupt + * @arg SDMMC_IT_ACKTIMEOUT: Boot Acknowledgment timeout interrupt + * @arg SDMMC_IT_VSWEND: Voltage switch critical timing section completion interrupt + * @arg SDMMC_IT_CKSTOP: SDMMC_CK stopped in Voltage switch procedure interrupt + * @arg SDMMC_IT_IDMABTC: IDMA buffer transfer complete interrupt + * @retval The new state of SD IT (SET or RESET). + */ +#define __HAL_SD_GET_IT(__HANDLE__, __INTERRUPT__) __SDMMC_GET_IT((__HANDLE__)->Instance, (__INTERRUPT__)) + +/** + * @brief Clear the SD's interrupt pending bits. + * @param __HANDLE__ SD Handle. + * @param __INTERRUPT__ specifies the interrupt pending bit to clear. + * This parameter can be one or a combination of the following values: + * @arg SDMMC_IT_CCRCFAIL: Command response received (CRC check failed) interrupt + * @arg SDMMC_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt + * @arg SDMMC_IT_CTIMEOUT: Command response timeout interrupt + * @arg SDMMC_IT_DTIMEOUT: Data timeout interrupt + * @arg SDMMC_IT_TXUNDERR: Transmit FIFO underrun error interrupt + * @arg SDMMC_IT_RXOVERR: Received FIFO overrun error interrupt + * @arg SDMMC_IT_CMDREND: Command response received (CRC check passed) interrupt + * @arg SDMMC_IT_CMDSENT: Command sent (no response required) interrupt + * @arg SDMMC_IT_DATAEND: Data end (data counter, DATACOUNT, is zero) interrupt + * @arg SDMMC_IT_DHOLD: Data transfer Hold interrupt + * @arg SDMMC_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt + * @arg SDMMC_IT_DABORT: Data transfer aborted by CMD12 interrupt + * @arg SDMMC_IT_BUSYD0END: End of SDMMC_D0 Busy following a CMD response detected interrupt + * @arg SDMMC_IT_SDIOIT: SDIO interrupt received interrupt + * @arg SDMMC_IT_ACKFAIL: Boot Acknowledgment received interrupt + * @arg SDMMC_IT_ACKTIMEOUT: Boot Acknowledgment timeout interrupt + * @arg SDMMC_IT_VSWEND: Voltage switch critical timing section completion interrupt + * @arg SDMMC_IT_CKSTOP: SDMMC_CK stopped in Voltage switch procedure interrupt + * @arg SDMMC_IT_IDMABTC: IDMA buffer transfer complete interrupt + * @retval None + */ +#define __HAL_SD_CLEAR_IT(__HANDLE__, __INTERRUPT__) __SDMMC_CLEAR_IT((__HANDLE__)->Instance, (__INTERRUPT__)) + +/** + * @} + */ + +/* Include SD HAL Extension module */ +#include "stm32h7xx_hal_sd_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup SD_Exported_Functions SD Exported Functions * @ingroup RTEMSBSPsARMSTM32H7 - * @{
- */
-
-/** @defgroup SD_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{ + */ + +/** @defgroup SD_Exported_Functions_Group1 Initialization and de-initialization functions * @ingroup RTEMSBSPsARMSTM32H7 - * @{
- */
-HAL_StatusTypeDef HAL_SD_Init (SD_HandleTypeDef *hsd);
-HAL_StatusTypeDef HAL_SD_InitCard (SD_HandleTypeDef *hsd);
-HAL_StatusTypeDef HAL_SD_DeInit (SD_HandleTypeDef *hsd);
-void HAL_SD_MspInit (SD_HandleTypeDef *hsd);
-void HAL_SD_MspDeInit(SD_HandleTypeDef *hsd);
-/**
- * @}
- */
-
-/** @defgroup SD_Exported_Functions_Group2 Input and Output operation functions
+ * @{ + */ +HAL_StatusTypeDef HAL_SD_Init(SD_HandleTypeDef *hsd); +HAL_StatusTypeDef HAL_SD_InitCard(SD_HandleTypeDef *hsd); +HAL_StatusTypeDef HAL_SD_DeInit(SD_HandleTypeDef *hsd); +void HAL_SD_MspInit(SD_HandleTypeDef *hsd); +void HAL_SD_MspDeInit(SD_HandleTypeDef *hsd); +/** + * @} + */ + +/** @defgroup SD_Exported_Functions_Group2 Input and Output operation functions * @ingroup RTEMSBSPsARMSTM32H7 - * @{
- */
-/* Blocking mode: Polling */
-HAL_StatusTypeDef HAL_SD_ReadBlocks (SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks, uint32_t Timeout);
-HAL_StatusTypeDef HAL_SD_WriteBlocks (SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks, uint32_t Timeout);
-HAL_StatusTypeDef HAL_SD_Erase (SD_HandleTypeDef *hsd, uint32_t BlockStartAdd, uint32_t BlockEndAdd);
-/* Non-Blocking mode: IT */
-HAL_StatusTypeDef HAL_SD_ReadBlocks_IT (SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks);
-HAL_StatusTypeDef HAL_SD_WriteBlocks_IT (SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks);
-/* Non-Blocking mode: DMA */
-HAL_StatusTypeDef HAL_SD_ReadBlocks_DMA (SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks);
-HAL_StatusTypeDef HAL_SD_WriteBlocks_DMA(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks);
-
-void HAL_SD_IRQHandler (SD_HandleTypeDef *hsd);
-
-/* Callback in non blocking modes (DMA) */
-void HAL_SD_TxCpltCallback (SD_HandleTypeDef *hsd);
-void HAL_SD_RxCpltCallback (SD_HandleTypeDef *hsd);
-void HAL_SD_ErrorCallback (SD_HandleTypeDef *hsd);
-void HAL_SD_AbortCallback (SD_HandleTypeDef *hsd);
-
-#if (USE_SD_TRANSCEIVER != 0U)
-/* Callback to switch in 1.8V mode */
-void HAL_SD_DriveTransceiver_1_8V_Callback(FlagStatus status);
-#endif /* USE_SD_TRANSCEIVER */
-
-#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U)
-/* SD callback registering/unregistering */
-HAL_StatusTypeDef HAL_SD_RegisterCallback (SD_HandleTypeDef *hsd, HAL_SD_CallbackIDTypeDef CallbackID, pSD_CallbackTypeDef pCallback);
-HAL_StatusTypeDef HAL_SD_UnRegisterCallback(SD_HandleTypeDef *hsd, HAL_SD_CallbackIDTypeDef CallbackID);
-
-#if (USE_SD_TRANSCEIVER != 0U)
-HAL_StatusTypeDef HAL_SD_RegisterTransceiverCallback (SD_HandleTypeDef *hsd, pSD_TransceiverCallbackTypeDef pCallback);
-HAL_StatusTypeDef HAL_SD_UnRegisterTransceiverCallback(SD_HandleTypeDef *hsd);
-#endif /* USE_SD_TRANSCEIVER */
-#endif /* USE_HAL_SD_REGISTER_CALLBACKS */
-
-/**
- * @}
- */
-
-/** @defgroup SD_Exported_Functions_Group3 Peripheral Control functions
+ * @{ + */ +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_SD_ReadBlocks(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks, + uint32_t Timeout); +HAL_StatusTypeDef HAL_SD_WriteBlocks(SD_HandleTypeDef *hsd, const uint8_t *pData, uint32_t BlockAdd, + uint32_t NumberOfBlocks, uint32_t Timeout); +HAL_StatusTypeDef HAL_SD_Erase(SD_HandleTypeDef *hsd, uint32_t BlockStartAdd, uint32_t BlockEndAdd); +/* Non-Blocking mode: IT */ +HAL_StatusTypeDef HAL_SD_ReadBlocks_IT(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, + uint32_t NumberOfBlocks); +HAL_StatusTypeDef HAL_SD_WriteBlocks_IT(SD_HandleTypeDef *hsd, const uint8_t *pData, uint32_t BlockAdd, + uint32_t NumberOfBlocks); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_SD_ReadBlocks_DMA(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, + uint32_t NumberOfBlocks); +HAL_StatusTypeDef HAL_SD_WriteBlocks_DMA(SD_HandleTypeDef *hsd, const uint8_t *pData, uint32_t BlockAdd, + uint32_t NumberOfBlocks); + +void HAL_SD_IRQHandler(SD_HandleTypeDef *hsd); + +/* Callback in non blocking modes (DMA) */ +void HAL_SD_TxCpltCallback(SD_HandleTypeDef *hsd); +void HAL_SD_RxCpltCallback(SD_HandleTypeDef *hsd); +void HAL_SD_ErrorCallback(SD_HandleTypeDef *hsd); +void HAL_SD_AbortCallback(SD_HandleTypeDef *hsd); + +#if (USE_SD_TRANSCEIVER != 0U) +/* Callback to switch in 1.8V mode */ +void HAL_SD_DriveTransceiver_1_8V_Callback(FlagStatus status); +#endif /* USE_SD_TRANSCEIVER */ + +#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U) +/* SD callback registering/unregistering */ +HAL_StatusTypeDef HAL_SD_RegisterCallback(SD_HandleTypeDef *hsd, HAL_SD_CallbackIDTypeDef CallbackID, + pSD_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_SD_UnRegisterCallback(SD_HandleTypeDef *hsd, HAL_SD_CallbackIDTypeDef CallbackID); + +#if (USE_SD_TRANSCEIVER != 0U) +HAL_StatusTypeDef HAL_SD_RegisterTransceiverCallback(SD_HandleTypeDef *hsd, pSD_TransceiverCallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_SD_UnRegisterTransceiverCallback(SD_HandleTypeDef *hsd); +#endif /* USE_SD_TRANSCEIVER */ +#endif /* USE_HAL_SD_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup SD_Exported_Functions_Group3 Peripheral Control functions * @ingroup RTEMSBSPsARMSTM32H7 - * @{
- */
-HAL_StatusTypeDef HAL_SD_ConfigWideBusOperation(SD_HandleTypeDef *hsd, uint32_t WideMode);
-HAL_StatusTypeDef HAL_SD_ConfigSpeedBusOperation(SD_HandleTypeDef *hsd, uint32_t SpeedMode);
-/**
- * @}
- */
-
-/** @defgroup SD_Exported_Functions_Group4 SD card related functions
+ * @{ + */ +HAL_StatusTypeDef HAL_SD_ConfigWideBusOperation(SD_HandleTypeDef *hsd, uint32_t WideMode); +HAL_StatusTypeDef HAL_SD_ConfigSpeedBusOperation(SD_HandleTypeDef *hsd, uint32_t SpeedMode); +/** + * @} + */ + +/** @defgroup SD_Exported_Functions_Group4 SD card related functions * @ingroup RTEMSBSPsARMSTM32H7 - * @{
- */
-HAL_SD_CardStateTypeDef HAL_SD_GetCardState(SD_HandleTypeDef *hsd);
-HAL_StatusTypeDef HAL_SD_GetCardCID (SD_HandleTypeDef *hsd, HAL_SD_CardCIDTypeDef *pCID);
-HAL_StatusTypeDef HAL_SD_GetCardCSD (SD_HandleTypeDef *hsd, HAL_SD_CardCSDTypeDef *pCSD);
-HAL_StatusTypeDef HAL_SD_GetCardStatus(SD_HandleTypeDef *hsd, HAL_SD_CardStatusTypeDef *pStatus);
-HAL_StatusTypeDef HAL_SD_GetCardInfo (SD_HandleTypeDef *hsd, HAL_SD_CardInfoTypeDef *pCardInfo);
-/**
- * @}
- */
-
-/** @defgroup SD_Exported_Functions_Group5 Peripheral State and Errors functions
+ * @{ + */ +HAL_SD_CardStateTypeDef HAL_SD_GetCardState(SD_HandleTypeDef *hsd); +HAL_StatusTypeDef HAL_SD_GetCardCID(SD_HandleTypeDef *hsd, HAL_SD_CardCIDTypeDef *pCID); +HAL_StatusTypeDef HAL_SD_GetCardCSD(SD_HandleTypeDef *hsd, HAL_SD_CardCSDTypeDef *pCSD); +HAL_StatusTypeDef HAL_SD_GetCardStatus(SD_HandleTypeDef *hsd, HAL_SD_CardStatusTypeDef *pStatus); +HAL_StatusTypeDef HAL_SD_GetCardInfo(SD_HandleTypeDef *hsd, HAL_SD_CardInfoTypeDef *pCardInfo); +/** + * @} + */ + +/** @defgroup SD_Exported_Functions_Group5 Peripheral State and Errors functions * @ingroup RTEMSBSPsARMSTM32H7 - * @{
- */
-HAL_SD_StateTypeDef HAL_SD_GetState(SD_HandleTypeDef *hsd);
-uint32_t HAL_SD_GetError(SD_HandleTypeDef *hsd);
-/**
- * @}
- */
-
-/** @defgroup SD_Exported_Functions_Group6 Perioheral Abort management
+ * @{ + */ +HAL_SD_StateTypeDef HAL_SD_GetState(SD_HandleTypeDef *hsd); +uint32_t HAL_SD_GetError(SD_HandleTypeDef *hsd); +/** + * @} + */ + +/** @defgroup SD_Exported_Functions_Group6 Perioheral Abort management * @ingroup RTEMSBSPsARMSTM32H7 - * @{
- */
-HAL_StatusTypeDef HAL_SD_Abort (SD_HandleTypeDef *hsd);
-HAL_StatusTypeDef HAL_SD_Abort_IT(SD_HandleTypeDef *hsd);
-/**
- * @}
- */
-
-/* Private types -------------------------------------------------------------*/
-/** @defgroup SD_Private_Types SD Private Types
+ * @{ + */ +HAL_StatusTypeDef HAL_SD_Abort(SD_HandleTypeDef *hsd); +HAL_StatusTypeDef HAL_SD_Abort_IT(SD_HandleTypeDef *hsd); +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/** @defgroup SD_Private_Types SD Private Types * @ingroup RTEMSBSPsARMSTM32H7 - * @{
- */
-
-/**
- * @}
- */
-
-/* Private defines -----------------------------------------------------------*/
-/** @defgroup SD_Private_Defines SD Private Defines
+ * @{ + */ + +/** + * @} + */ + +/* Private defines -----------------------------------------------------------*/ +/** @defgroup SD_Private_Defines SD Private Defines * @ingroup RTEMSBSPsARMSTM32H7 - * @{
- */
-
-/**
- * @}
- */
-
-/* Private variables ---------------------------------------------------------*/
-/** @defgroup SD_Private_Variables SD Private Variables
+ * @{ + */ + +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/** @defgroup SD_Private_Variables SD Private Variables * @ingroup RTEMSBSPsARMSTM32H7 - * @{
- */
-
-/**
- * @}
- */
-
-/* Private constants ---------------------------------------------------------*/
-/** @defgroup SD_Private_Constants SD Private Constants
+ * @{ + */ + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup SD_Private_Constants SD Private Constants * @ingroup RTEMSBSPsARMSTM32H7 - * @{
- */
-
-/**
- * @}
- */
-
-/* Private macros ------------------------------------------------------------*/
-/** @defgroup SD_Private_Macros SD Private Macros
+ * @{ + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup SD_Private_Macros SD Private Macros * @ingroup RTEMSBSPsARMSTM32H7 - * @{
- */
-
-/**
- * @}
- */
-
-/* Private functions prototypes ----------------------------------------------*/
-/** @defgroup SD_Private_Functions_Prototypes SD Private Functions Prototypes
+ * @{ + */ + +/** + * @} + */ + +/* Private functions prototypes ----------------------------------------------*/ +/** @defgroup SD_Private_Functions_Prototypes SD Private Functions Prototypes * @ingroup RTEMSBSPsARMSTM32H7 - * @{
- */
-
-/**
- * @}
- */
-
-/* Private functions ---------------------------------------------------------*/
-/** @defgroup SD_Private_Functions SD Private Functions
+ * @{ + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @defgroup SD_Private_Functions SD Private Functions * @ingroup RTEMSBSPsARMSTM32H7 - * @{
- */
-
-/**
- * @}
- */
-
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#ifdef __cplusplus
-}
-#endif
-
-
-#endif /* STM32H7xx_HAL_SD_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+ * @{ + */ + +/** + * @} + */ + + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + + +#endif /* STM32H7xx_HAL_SD_H */ |