diff options
Diffstat (limited to 'bsps/arm/stm32h7/include/stm32h7xx_hal_def.h')
-rw-r--r-- | bsps/arm/stm32h7/include/stm32h7xx_hal_def.h | 416 |
1 files changed, 229 insertions, 187 deletions
diff --git a/bsps/arm/stm32h7/include/stm32h7xx_hal_def.h b/bsps/arm/stm32h7/include/stm32h7xx_hal_def.h index decd21f08c..7317b5ed5d 100644 --- a/bsps/arm/stm32h7/include/stm32h7xx_hal_def.h +++ b/bsps/arm/stm32h7/include/stm32h7xx_hal_def.h @@ -1,187 +1,229 @@ -/**
- ******************************************************************************
- * @file stm32h7xx_hal_def.h
- * @author MCD Application Team
- * @brief This file contains HAL common defines, enumeration, macros and
- * structures definitions.
- ******************************************************************************
- * @attention
- *
- * <h2><center>© Copyright (c) 2017 STMicroelectronics.
- * All rights reserved.</center></h2>
- *
- * This software component is licensed by ST under BSD 3-Clause license,
- * the "License"; You may not use this file except in compliance with the
- * License. You may obtain a copy of the License at:
- * opensource.org/licenses/BSD-3-Clause
- *
- ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef STM32H7xx_HAL_DEF
-#define STM32H7xx_HAL_DEF
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32h7xx.h"
-#include "Legacy/stm32_hal_legacy.h"
-#include <stddef.h>
-
-/* Exported types ------------------------------------------------------------*/
-
-/**
- * @brief HAL Status structures definition
- */
-typedef enum
-{
- HAL_OK = 0x00,
- HAL_ERROR = 0x01,
- HAL_BUSY = 0x02,
- HAL_TIMEOUT = 0x03
-} HAL_StatusTypeDef;
-
-/**
- * @brief HAL Lock structures definition
- */
-typedef enum
-{
- HAL_UNLOCKED = 0x00,
- HAL_LOCKED = 0x01
-} HAL_LockTypeDef;
-
-/* Exported macro ------------------------------------------------------------*/
-
-#define HAL_MAX_DELAY 0xFFFFFFFFU
-
-#define HAL_IS_BIT_SET(REG, BIT) (((REG) & (BIT)) == (BIT))
-#define HAL_IS_BIT_CLR(REG, BIT) (((REG) & (BIT)) == 0U)
-
-#define __HAL_LINKDMA(__HANDLE__, __PPP_DMA_FIELD__, __DMA_HANDLE__) \
- do{ \
- (__HANDLE__)->__PPP_DMA_FIELD__ = &(__DMA_HANDLE__); \
- (__DMA_HANDLE__).Parent = (__HANDLE__); \
- } while(0)
-
-#define UNUSED(x) ((void)(x))
-
-/** @brief Reset the Handle's State field.
- * @param __HANDLE__: specifies the Peripheral Handle.
- * @note This macro can be used for the following purpose:
- * - When the Handle is declared as local variable; before passing it as parameter
- * to HAL_PPP_Init() for the first time, it is mandatory to use this macro
- * to set to 0 the Handle's "State" field.
- * Otherwise, "State" field may have any random value and the first time the function
- * HAL_PPP_Init() is called, the low level hardware initialization will be missed
- * (i.e. HAL_PPP_MspInit() will not be executed).
- * - When there is a need to reconfigure the low level hardware: instead of calling
- * HAL_PPP_DeInit() then HAL_PPP_Init(), user can make a call to this macro then HAL_PPP_Init().
- * In this later function, when the Handle's "State" field is set to 0, it will execute the function
- * HAL_PPP_MspInit() which will reconfigure the low level hardware.
- * @retval None
- */
-#define __HAL_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = 0)
-
-#if (USE_RTOS == 1)
- #error " USE_RTOS should be 0 in the current HAL release "
-#else
- #define __HAL_LOCK(__HANDLE__) \
- do{ \
- if((__HANDLE__)->Lock == HAL_LOCKED) \
- { \
- return HAL_BUSY; \
- } \
- else \
- { \
- (__HANDLE__)->Lock = HAL_LOCKED; \
- } \
- }while (0)
-
- #define __HAL_UNLOCK(__HANDLE__) \
- do{ \
- (__HANDLE__)->Lock = HAL_UNLOCKED; \
- }while (0)
-#endif /* USE_RTOS */
-
-#if defined ( __GNUC__ )
- #ifndef __weak
- #define __weak __attribute__((weak))
- #endif /* __weak */
- #ifndef __packed
- #define __packed __attribute__((__packed__))
- #endif /* __packed */
-#endif /* __GNUC__ */
-
-
-/* Macro to get variable aligned on 4-bytes, for __ICCARM__ the directive "#pragma data_alignment=4" must be used instead */
-#if defined (__GNUC__) /* GNU Compiler */
- #ifndef __ALIGN_END
- #define __ALIGN_END __attribute__ ((aligned (4)))
- #endif /* __ALIGN_END */
- #ifndef __ALIGN_BEGIN
- #define __ALIGN_BEGIN
- #endif /* __ALIGN_BEGIN */
-#else
- #ifndef __ALIGN_END
- #define __ALIGN_END
- #endif /* __ALIGN_END */
- #ifndef __ALIGN_BEGIN
- #if defined (__CC_ARM) /* ARM Compiler */
- #define __ALIGN_BEGIN __align(4)
- #elif defined (__ICCARM__) /* IAR Compiler */
- #define __ALIGN_BEGIN
- #endif /* __CC_ARM */
- #endif /* __ALIGN_BEGIN */
-#endif /* __GNUC__ */
-
-/* Macro to get variable aligned on 32-bytes,needed for cache maintenance purpose */
-#if defined (__GNUC__) /* GNU Compiler */
- #define ALIGN_32BYTES(buf) buf __attribute__ ((aligned (32)))
-#elif defined (__ICCARM__) /* IAR Compiler */
- #define ALIGN_32BYTES(buf) _Pragma("data_alignment=32") buf
-#elif defined (__CC_ARM) /* ARM Compiler */
- #define ALIGN_32BYTES(buf) __align(32) buf
-#endif
-
-/**
- * @brief __RAM_FUNC definition
- */
-#if defined ( __CC_ARM )
-/* ARM Compiler
- ------------
- RAM functions are defined using the toolchain options.
- Functions that are executed in RAM should reside in a separate source module.
- Using the 'Options for File' dialog you can simply change the 'Code / Const'
- area of a module to a memory space in physical RAM.
- Available memory areas are declared in the 'Target' tab of the 'Options for Target'
- dialog.
-*/
-#define __RAM_FUNC
-
-#elif defined ( __ICCARM__ )
-/* ICCARM Compiler
- ---------------
- RAM functions are defined using a specific toolchain keyword "__ramfunc".
-*/
-#define __RAM_FUNC __ramfunc
-
-#elif defined ( __GNUC__ )
-/* GNU Compiler
- ------------
- RAM functions are defined using a specific toolchain attribute
- "__attribute__((section(".RamFunc")))".
-*/
-#define __RAM_FUNC __attribute__((section(".RamFunc")))
-
-#endif
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* STM32H7xx_HAL_DEF */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+/** + ****************************************************************************** + * @file stm32h7xx_hal_def.h + * @author MCD Application Team + * @brief This file contains HAL common defines, enumeration, macros and + * structures definitions. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_HAL_DEF +#define STM32H7xx_HAL_DEF + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx.h" +#include "Legacy/stm32_hal_legacy.h" +#include <stddef.h> +#ifdef __rtems__ +/* this is to avoid definition of log function which conflicts with + * freebsd's systm.h log function. Whole theatre just to make sure + * we do have float_t available (defined in math.h) which is later + * used in HAL */ +#define __math_68881 1 +#endif /* __rtems__ */ +#include <math.h> + +/* Exported types ------------------------------------------------------------*/ + +/** + * @brief HAL Status structures definition + */ +typedef enum +{ + HAL_OK = 0x00, + HAL_ERROR = 0x01, + HAL_BUSY = 0x02, + HAL_TIMEOUT = 0x03 +} HAL_StatusTypeDef; + +/** + * @brief HAL Lock structures definition + */ +typedef enum +{ + HAL_UNLOCKED = 0x00, + HAL_LOCKED = 0x01 +} HAL_LockTypeDef; + +/* Exported macro ------------------------------------------------------------*/ + +#define HAL_MAX_DELAY 0xFFFFFFFFU + +#define HAL_IS_BIT_SET(REG, BIT) (((REG) & (BIT)) == (BIT)) +#define HAL_IS_BIT_CLR(REG, BIT) (((REG) & (BIT)) == 0U) + +#define __HAL_LINKDMA(__HANDLE__, __PPP_DMA_FIELD__, __DMA_HANDLE__) \ + do{ \ + (__HANDLE__)->__PPP_DMA_FIELD__ = &(__DMA_HANDLE__); \ + (__DMA_HANDLE__).Parent = (__HANDLE__); \ + } while(0) + +#if !defined(UNUSED) +#define UNUSED(x) ((void)(x)) /* To avoid gcc/g++ warnings */ +#endif /* UNUSED */ + +/** @brief Reset the Handle's State field. + * @param __HANDLE__: specifies the Peripheral Handle. + * @note This macro can be used for the following purpose: + * - When the Handle is declared as local variable; before passing it as parameter + * to HAL_PPP_Init() for the first time, it is mandatory to use this macro + * to set to 0 the Handle's "State" field. + * Otherwise, "State" field may have any random value and the first time the function + * HAL_PPP_Init() is called, the low level hardware initialization will be missed + * (i.e. HAL_PPP_MspInit() will not be executed). + * - When there is a need to reconfigure the low level hardware: instead of calling + * HAL_PPP_DeInit() then HAL_PPP_Init(), user can make a call to this macro then HAL_PPP_Init(). + * In this later function, when the Handle's "State" field is set to 0, it will execute the function + * HAL_PPP_MspInit() which will reconfigure the low level hardware. + * @retval None + */ +#define __HAL_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = 0) + +#if (USE_RTOS == 1) + #error " USE_RTOS should be 0 in the current HAL release " +#else + #define __HAL_LOCK(__HANDLE__) \ + do{ \ + if((__HANDLE__)->Lock == HAL_LOCKED) \ + { \ + return HAL_BUSY; \ + } \ + else \ + { \ + (__HANDLE__)->Lock = HAL_LOCKED; \ + } \ + }while (0) + + #define __HAL_UNLOCK(__HANDLE__) \ + do{ \ + (__HANDLE__)->Lock = HAL_UNLOCKED; \ + }while (0) +#endif /* USE_RTOS */ + + +#if defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) /* ARM Compiler V6 */ + #ifndef __weak + #define __weak __attribute__((weak)) + #endif + #ifndef __packed + #define __packed __attribute__((packed)) + #endif +#elif defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */ + #ifndef __weak + #define __weak __attribute__((weak)) + #endif /* __weak */ + #ifndef __packed + #define __packed __attribute__((__packed__)) + #endif /* __packed */ +#endif /* __GNUC__ */ + + +/* Macro to get variable aligned on 4-bytes, for __ICCARM__ the directive "#pragma data_alignment=4" must be used instead */ +#if defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) /* ARM Compiler V6 */ + #ifndef __ALIGN_BEGIN + #define __ALIGN_BEGIN + #endif + #ifndef __ALIGN_END + #define __ALIGN_END __attribute__ ((aligned (4))) + #endif +#elif defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */ + #ifndef __ALIGN_END + #define __ALIGN_END __attribute__ ((aligned (4))) + #endif /* __ALIGN_END */ + #ifndef __ALIGN_BEGIN + #define __ALIGN_BEGIN + #endif /* __ALIGN_BEGIN */ +#else + #ifndef __ALIGN_END + #define __ALIGN_END + #endif /* __ALIGN_END */ + #ifndef __ALIGN_BEGIN + #if defined (__CC_ARM) /* ARM Compiler V5 */ + #define __ALIGN_BEGIN __align(4) + #elif defined (__ICCARM__) /* IAR Compiler */ + #define __ALIGN_BEGIN + #endif /* __CC_ARM */ + #endif /* __ALIGN_BEGIN */ +#endif /* __GNUC__ */ + +/* Macro to get variable aligned on 32-bytes,needed for cache maintenance purpose */ +#if defined (__GNUC__) /* GNU Compiler */ + #define ALIGN_32BYTES(buf) buf __attribute__ ((aligned (32))) +#elif defined (__ICCARM__) /* IAR Compiler */ + #define ALIGN_32BYTES(buf) _Pragma("data_alignment=32") buf +#elif defined (__CC_ARM) /* ARM Compiler */ + #define ALIGN_32BYTES(buf) __align(32) buf +#endif + +/** + * @brief __RAM_FUNC definition + */ +#if defined ( __CC_ARM ) || (defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)) +/* ARM Compiler V4/V5 and V6 + -------------------------- + RAM functions are defined using the toolchain options. + Functions that are executed in RAM should reside in a separate source module. + Using the 'Options for File' dialog you can simply change the 'Code / Const' + area of a module to a memory space in physical RAM. + Available memory areas are declared in the 'Target' tab of the 'Options for Target' + dialog. +*/ +#define __RAM_FUNC + +#elif defined ( __ICCARM__ ) +/* ICCARM Compiler + --------------- + RAM functions are defined using a specific toolchain keyword "__ramfunc". +*/ +#define __RAM_FUNC __ramfunc + +#elif defined ( __GNUC__ ) +/* GNU Compiler + ------------ + RAM functions are defined using a specific toolchain attribute + "__attribute__((section(".RamFunc")))". +*/ +#define __RAM_FUNC __attribute__((section(".RamFunc"))) + +#endif + +/** + * @brief __NOINLINE definition + */ +#if defined ( __CC_ARM ) || (defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)) || defined ( __GNUC__ ) +/* ARM V4/V5 and V6 & GNU Compiler + ------------------------------- +*/ +#define __NOINLINE __attribute__ ( (noinline) ) + +#elif defined ( __ICCARM__ ) +/* ICCARM Compiler + --------------- +*/ +#define __NOINLINE _Pragma("optimize = no_inline") + +#endif + + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7xx_HAL_DEF */ + + |