summaryrefslogtreecommitdiffstats
path: root/bsps/arm/stm32h7/hal/stm32h7xx_hal_pwr_ex.c
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--bsps/arm/stm32h7/hal/stm32h7xx_hal_pwr_ex.c4242
1 files changed, 2142 insertions, 2100 deletions
diff --git a/bsps/arm/stm32h7/hal/stm32h7xx_hal_pwr_ex.c b/bsps/arm/stm32h7/hal/stm32h7xx_hal_pwr_ex.c
index 22d099faf1..d329d0a85b 100644
--- a/bsps/arm/stm32h7/hal/stm32h7xx_hal_pwr_ex.c
+++ b/bsps/arm/stm32h7/hal/stm32h7xx_hal_pwr_ex.c
@@ -1,2109 +1,2151 @@
-/**
- ******************************************************************************
- * @file stm32h7xx_hal_pwr_ex.c
- * @author MCD Application Team
- * @brief Extended PWR HAL module driver.
- * This file provides firmware functions to manage the following
- * functionalities of PWR extension peripheral:
- * + Peripheral Extended features functions
- @verbatim
- ==============================================================================
- ##### How to use this driver #####
- ==============================================================================
- [..]
- (#) Call HAL_PWREx_ConfigSupply() function to configure the regulator supply
- with the following different setups according to hardware (support SMPS):
- (+) PWR_DIRECT_SMPS_SUPPLY
- (+) PWR_SMPS_1V8_SUPPLIES_LDO
- (+) PWR_SMPS_2V5_SUPPLIES_LDO
- (+) PWR_SMPS_1V8_SUPPLIES_EXT_AND_LDO
- (+) PWR_SMPS_2V5_SUPPLIES_EXT_AND_LDO
- (+) PWR_SMPS_1V8_SUPPLIES_EXT
- (+) PWR_SMPS_2V5_SUPPLIES_EXT
- (+) PWR_LDO_SUPPLY
- (+) PWR_EXTERNAL_SOURCE_SUPPLY
-
- (#) Call HAL_PWREx_GetSupplyConfig() function to get the current supply setup.
-
- (#) Call HAL_PWREx_ControlVoltageScaling() function to configure the main
- internal regulator output voltage. The voltage scaling could be one of
- the following scales :
- (+) PWR_REGULATOR_VOLTAGE_SCALE0
- (+) PWR_REGULATOR_VOLTAGE_SCALE1
- (+) PWR_REGULATOR_VOLTAGE_SCALE2
- (+) PWR_REGULATOR_VOLTAGE_SCALE3
-
- (#) Call HAL_PWREx_GetVoltageRange() function to get the current output
- voltage applied to the main regulator.
-
- (#) Call HAL_PWREx_ControlStopModeVoltageScaling() function to configure the
- main internal regulator output voltage in STOP mode. The voltage scaling
- in STOP mode could be one of the following scales :
- (+) PWR_REGULATOR_SVOS_SCALE3
- (+) PWR_REGULATOR_SVOS_SCALE4
- (+) PWR_REGULATOR_SVOS_SCALE5
-
- (#) Call HAL_PWREx_GetStopModeVoltageRange() function to get the current
- output voltage applied to the main regulator in STOP mode.
-
- (#) Call HAL_PWREx_EnterSTOP2Mode() function to enter the system in STOP mode
- with core domain in D2STOP mode. This API is used only for STM32H7Axxx
- and STM32H7Bxxx devices.
- Please ensure to clear all CPU pending events by calling
- HAL_PWREx_ClearPendingEvent() function when trying to enter the Cortex-Mx
- in DEEP-SLEEP mode with __WFE() entry.
-
- (#) Call HAL_PWREx_EnterSTOPMode() function to enter the selected domain in
- DSTOP mode. Call this API with all available power domains to enter the
- system in STOP mode.
- Please ensure to clear all CPU pending events by calling
- HAL_PWREx_ClearPendingEvent() function when trying to enter the Cortex-Mx
- in DEEP-SLEEP mode with __WFE() entry.
-
- (#) Call HAL_PWREx_ClearPendingEvent() function always before entring the
- Cortex-Mx in any low power mode (SLEEP/DEEP-SLEEP) using WFE entry.
-
- (#) Call HAL_PWREx_EnterSTANDBYMode() function to enter the selected domain
- in DSTANDBY mode. Call this API with all available power domains to enter
- the system in STANDBY mode.
-
- (#) Call HAL_PWREx_ConfigD3Domain() function to setup the D3/SRD domain state
- (RUN/STOP) when the system enter to low power mode.
-
- (#) Call HAL_PWREx_ClearDomainFlags() function to clear the CPU flags for the
- selected power domain. This API is used only for dual core devices.
-
- (#) Call HAL_PWREx_HoldCore() and HAL_PWREx_ReleaseCore() functions to hold
- and release the selected CPU and and their domain peripherals when
- exiting STOP mode. These APIs are used only for dual core devices.
-
- (#) Call HAL_PWREx_EnableFlashPowerDown() and
- HAL_PWREx_DisableFlashPowerDown() functions to enable and disable the
- Flash Power Down in STOP mode.
-
- (#) Call HAL_PWREx_EnableMemoryShutOff() and
- HAL_PWREx_DisableMemoryShutOff() functions to enable and disable the
- memory block shut-off in DStop or DStop2. These APIs are used only for
- STM32H7Axxx and STM32H7Bxxx lines.
-
- (#) Call HAL_PWREx_EnableWakeUpPin() and HAL_PWREx_DisableWakeUpPin()
- functions to enable and disable the Wake-up pin functionality for
- the selected pin.
-
- (#) Call HAL_PWREx_GetWakeupFlag() and HAL_PWREx_ClearWakeupFlag()
- functions to manage wake-up flag for the selected pin.
-
- (#) Call HAL_PWREx_WAKEUP_PIN_IRQHandler() function to handle all wake-up
- pins interrupts.
-
- (#) Call HAL_PWREx_EnableBkUpReg() and HAL_PWREx_DisableBkUpReg() functions
- to enable and disable the backup domain regulator.
-
- (#) Call HAL_PWREx_EnableUSBReg(), HAL_PWREx_DisableUSBReg(),
- HAL_PWREx_EnableUSBVoltageDetector() and
- HAL_PWREx_DisableUSBVoltageDetector() functions to manage USB power
- regulation functionnalities.
-
- (#) Call HAL_PWREx_EnableBatteryCharging() and
- HAL_PWREx_DisableBatteryCharging() functions to enable and disable the
- battery charging feature with the selected resistor.
-
- (#) Call HAL_PWREx_EnableAnalogBooster() and
- HAL_PWREx_DisableAnalogBooster() functions to enable and disable the
- AVD boost feature when the VDD supply voltage is below 2V7.
-
- (#) Call HAL_PWREx_EnableMonitoring() and HAL_PWREx_DisableMonitoring()
- functions to enable and disable the VBAT and Temperature monitoring.
- When VBAT and Temperature monitoring feature is enables, use
- HAL_PWREx_GetTemperatureLevel() and HAL_PWREx_GetVBATLevel() to get
- respectively the Temperature level and VBAT level.
-
- (#) Call HAL_PWREx_GetMMCVoltage() and HAL_PWREx_DisableMonitoring()
- function to get VDDMMC voltage level. This API is used only for
- STM32H7AxxQ, STM32H7BxxQ, STM32H7Axxx and STM32H7Bxxx lines
-
- (#) Call HAL_PWREx_ConfigAVD() after setting parameter to be configured
- (event mode and voltage threshold) in order to set up the Analog Voltage
- Detector then use HAL_PWREx_EnableAVD() and HAL_PWREx_DisableAVD()
- functions to start and stop the AVD detection.
- (+) AVD level could be one of the following values :
- (++) 1V7
- (++) 2V1
- (++) 2V5
- (++) 2V8
-
- (#) Call HAL_PWREx_PVD_AVD_IRQHandler() function to handle the PWR PVD and
- AVD interrupt request.
-
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics.
- * All rights reserved.</center></h2>
- *
- * This software component is licensed by ST under BSD 3-Clause license,
- * the "License"; You may not use this file except in compliance with the
- * License. You may obtain a copy of the License at:
- * opensource.org/licenses/BSD-3-Clause
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32h7xx_hal.h"
-
-/** @addtogroup STM32H7xx_HAL_Driver
- * @{
- */
-
-/** @defgroup PWREx PWREx
+/**
+ ******************************************************************************
+ * @file stm32h7xx_hal_pwr_ex.c
+ * @author MCD Application Team
+ * @brief Extended PWR HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of PWR extension peripheral:
+ * + Peripheral Extended features functions
+ ******************************************************************************
+ * @attention
+ *
+ * Copyright (c) 2017 STMicroelectronics.
+ * All rights reserved.
+ *
+ * This software is licensed under terms that can be found in the LICENSE file
+ * in the root directory of this software component.
+ * If no LICENSE file comes with this software, it is provided AS-IS.
+ *
+ ******************************************************************************
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ (#) Call HAL_PWREx_ConfigSupply() function to configure the regulator supply
+ with the following different setups according to hardware (support SMPS):
+ (+) PWR_DIRECT_SMPS_SUPPLY
+ (+) PWR_SMPS_1V8_SUPPLIES_LDO
+ (+) PWR_SMPS_2V5_SUPPLIES_LDO
+ (+) PWR_SMPS_1V8_SUPPLIES_EXT_AND_LDO
+ (+) PWR_SMPS_2V5_SUPPLIES_EXT_AND_LDO
+ (+) PWR_SMPS_1V8_SUPPLIES_EXT
+ (+) PWR_SMPS_2V5_SUPPLIES_EXT
+ (+) PWR_LDO_SUPPLY
+ (+) PWR_EXTERNAL_SOURCE_SUPPLY
+
+ (#) Call HAL_PWREx_GetSupplyConfig() function to get the current supply setup.
+
+ (#) Call HAL_PWREx_ControlVoltageScaling() function to configure the main
+ internal regulator output voltage. The voltage scaling could be one of
+ the following scales :
+ (+) PWR_REGULATOR_VOLTAGE_SCALE0
+ (+) PWR_REGULATOR_VOLTAGE_SCALE1
+ (+) PWR_REGULATOR_VOLTAGE_SCALE2
+ (+) PWR_REGULATOR_VOLTAGE_SCALE3
+
+ (#) Call HAL_PWREx_GetVoltageRange() function to get the current output
+ voltage applied to the main regulator.
+
+ (#) Call HAL_PWREx_ControlStopModeVoltageScaling() function to configure the
+ main internal regulator output voltage in STOP mode. The voltage scaling
+ in STOP mode could be one of the following scales :
+ (+) PWR_REGULATOR_SVOS_SCALE3
+ (+) PWR_REGULATOR_SVOS_SCALE4
+ (+) PWR_REGULATOR_SVOS_SCALE5
+
+ (#) Call HAL_PWREx_GetStopModeVoltageRange() function to get the current
+ output voltage applied to the main regulator in STOP mode.
+
+ (#) Call HAL_PWREx_EnterSTOP2Mode() function to enter the system in STOP mode
+ with core domain in D2STOP mode. This API is used only for STM32H7Axxx
+ and STM32H7Bxxx devices.
+ Please ensure to clear all CPU pending events by calling
+ HAL_PWREx_ClearPendingEvent() function when trying to enter the Cortex-Mx
+ in DEEP-SLEEP mode with __WFE() entry.
+
+ (#) Call HAL_PWREx_EnterSTOPMode() function to enter the selected domain in
+ DSTOP mode. Call this API with all available power domains to enter the
+ system in STOP mode.
+ Please ensure to clear all CPU pending events by calling
+ HAL_PWREx_ClearPendingEvent() function when trying to enter the Cortex-Mx
+ in DEEP-SLEEP mode with __WFE() entry.
+
+ (#) Call HAL_PWREx_ClearPendingEvent() function always before entring the
+ Cortex-Mx in any low power mode (SLEEP/DEEP-SLEEP) using WFE entry.
+
+ (#) Call HAL_PWREx_EnterSTANDBYMode() function to enter the selected domain
+ in DSTANDBY mode. Call this API with all available power domains to enter
+ the system in STANDBY mode.
+
+ (#) Call HAL_PWREx_ConfigD3Domain() function to setup the D3/SRD domain state
+ (RUN/STOP) when the system enter to low power mode.
+
+ (#) Call HAL_PWREx_ClearDomainFlags() function to clear the CPU flags for the
+ selected power domain. This API is used only for dual core devices.
+
+ (#) Call HAL_PWREx_HoldCore() and HAL_PWREx_ReleaseCore() functions to hold
+ and release the selected CPU and and their domain peripherals when
+ exiting STOP mode. These APIs are used only for dual core devices.
+
+ (#) Call HAL_PWREx_EnableFlashPowerDown() and
+ HAL_PWREx_DisableFlashPowerDown() functions to enable and disable the
+ Flash Power Down in STOP mode.
+
+ (#) Call HAL_PWREx_EnableMemoryShutOff() and
+ HAL_PWREx_DisableMemoryShutOff() functions to enable and disable the
+ memory block shut-off in DStop or DStop2. These APIs are used only for
+ STM32H7Axxx and STM32H7Bxxx lines.
+
+ (#) Call HAL_PWREx_EnableWakeUpPin() and HAL_PWREx_DisableWakeUpPin()
+ functions to enable and disable the Wake-up pin functionality for
+ the selected pin.
+
+ (#) Call HAL_PWREx_GetWakeupFlag() and HAL_PWREx_ClearWakeupFlag()
+ functions to manage wake-up flag for the selected pin.
+
+ (#) Call HAL_PWREx_WAKEUP_PIN_IRQHandler() function to handle all wake-up
+ pins interrupts.
+
+ (#) Call HAL_PWREx_EnableBkUpReg() and HAL_PWREx_DisableBkUpReg() functions
+ to enable and disable the backup domain regulator.
+
+ (#) Call HAL_PWREx_EnableUSBReg(), HAL_PWREx_DisableUSBReg(),
+ HAL_PWREx_EnableUSBVoltageDetector() and
+ HAL_PWREx_DisableUSBVoltageDetector() functions to manage USB power
+ regulation functionalities.
+
+ (#) Call HAL_PWREx_EnableBatteryCharging() and
+ HAL_PWREx_DisableBatteryCharging() functions to enable and disable the
+ battery charging feature with the selected resistor.
+
+ (#) Call HAL_PWREx_EnableAnalogBooster() and
+ HAL_PWREx_DisableAnalogBooster() functions to enable and disable the
+ AVD boost feature when the VDD supply voltage is below 2V7.
+
+ (#) Call HAL_PWREx_EnableMonitoring() and HAL_PWREx_DisableMonitoring()
+ functions to enable and disable the VBAT and Temperature monitoring.
+ When VBAT and Temperature monitoring feature is enables, use
+ HAL_PWREx_GetTemperatureLevel() and HAL_PWREx_GetVBATLevel() to get
+ respectively the Temperature level and VBAT level.
+
+ (#) Call HAL_PWREx_GetMMCVoltage() and HAL_PWREx_DisableMonitoring()
+ function to get VDDMMC voltage level. This API is used only for
+ STM32H7Axxx and STM32H7Bxxx lines
+
+ (#) Call HAL_PWREx_ConfigAVD() after setting parameter to be configured
+ (event mode and voltage threshold) in order to set up the Analog Voltage
+ Detector then use HAL_PWREx_EnableAVD() and HAL_PWREx_DisableAVD()
+ functions to start and stop the AVD detection.
+ (+) AVD level could be one of the following values :
+ (++) 1V7
+ (++) 2V1
+ (++) 2V5
+ (++) 2V8
+
+ (#) Call HAL_PWREx_PVD_AVD_IRQHandler() function to handle the PWR PVD and
+ AVD interrupt request.
+
+ @endverbatim
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32h7xx_hal.h"
+
+/** @addtogroup STM32H7xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup PWREx PWREx
* @ingroup RTEMSBSPsARMSTM32H7
- * @brief PWR Extended HAL module driver
- * @{
- */
-
-#ifdef HAL_PWR_MODULE_ENABLED
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-
-/** @addtogroup PWREx_Private_Constants
- * @{
- */
-
-/** @defgroup PWREx_AVD_Mode_Mask PWR Extended AVD Mode Mask
+ * @brief PWR Extended HAL module driver
+ * @{
+ */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+
+/** @addtogroup PWREx_Private_Constants
+ * @{
+ */
+
+/** @defgroup PWREx_AVD_Mode_Mask PWR Extended AVD Mode Mask
* @ingroup RTEMSBSPsARMSTM32H7
- * @{
- */
-#define AVD_MODE_IT (0x00010000U)
-#define AVD_MODE_EVT (0x00020000U)
-#define AVD_RISING_EDGE (0x00000001U)
-#define AVD_FALLING_EDGE (0x00000002U)
-#define AVD_RISING_FALLING_EDGE (0x00000003U)
-/**
- * @}
- */
-
-/** @defgroup PWREx_REG_SET_TIMEOUT PWR Extended Flag Setting Time Out Value
+ * @{
+ */
+#define AVD_MODE_IT (0x00010000U)
+#define AVD_MODE_EVT (0x00020000U)
+#define AVD_RISING_EDGE (0x00000001U)
+#define AVD_FALLING_EDGE (0x00000002U)
+#define AVD_RISING_FALLING_EDGE (0x00000003U)
+/**
+ * @}
+ */
+
+/** @defgroup PWREx_REG_SET_TIMEOUT PWR Extended Flag Setting Time Out Value
* @ingroup RTEMSBSPsARMSTM32H7
- * @{
- */
-#define PWR_FLAG_SETTING_DELAY (1000U)
-/**
- * @}
- */
-
-/** @defgroup PWREx_WakeUp_Pins_Offsets PWREx Wake-Up Pins masks and offsets
+ * @{
+ */
+#define PWR_FLAG_SETTING_DELAY (1000U)
+/**
+ * @}
+ */
+
+/** @defgroup PWREx_WakeUp_Pins_Offsets PWREx Wake-Up Pins masks and offsets
* @ingroup RTEMSBSPsARMSTM32H7
- * @{
- */
-/* Wake-Up Pins EXTI register mask */
-#define PWR_EXTI_WAKEUP_PINS_MASK (EXTI_IMR2_IM55 | EXTI_IMR2_IM56 |\
- EXTI_IMR2_IM57 | EXTI_IMR2_IM58 |\
- EXTI_IMR2_IM59 | EXTI_IMR2_IM60)
-
-/* Wake-Up Pins PWR Pin Pull shift offsets */
-#define PWR_WAKEUP_PINS_PULL_SHIFT_OFFSET (2U)
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-/* Exported types ------------------------------------------------------------*/
-/* Exported functions --------------------------------------------------------*/
-
-/** @defgroup PWREx_Exported_Functions PWREx Exported Functions
+ * @{
+ */
+/* Wake-Up Pins EXTI register mask */
+#if defined (EXTI_IMR2_IM57)
+#define PWR_EXTI_WAKEUP_PINS_MASK (EXTI_IMR2_IM55 | EXTI_IMR2_IM56 |\
+ EXTI_IMR2_IM57 | EXTI_IMR2_IM58 |\
+ EXTI_IMR2_IM59 | EXTI_IMR2_IM60)
+#else
+#define PWR_EXTI_WAKEUP_PINS_MASK (EXTI_IMR2_IM55 | EXTI_IMR2_IM56 |\
+ EXTI_IMR2_IM58 | EXTI_IMR2_IM60)
+#endif /* defined (EXTI_IMR2_IM57) */
+
+/* Wake-Up Pins PWR Pin Pull shift offsets */
+#define PWR_WAKEUP_PINS_PULL_SHIFT_OFFSET (2U)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/* Exported types ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup PWREx_Exported_Functions PWREx Exported Functions
* @ingroup RTEMSBSPsARMSTM32H7
- * @{
- */
-
-/** @defgroup PWREx_Exported_Functions_Group1 Power Supply Control Functions
+ * @{
+ */
+
+/** @defgroup PWREx_Exported_Functions_Group1 Power Supply Control Functions
* @ingroup RTEMSBSPsARMSTM32H7
- * @brief Power supply control functions
- *
-@verbatim
- ===============================================================================
- ##### Power supply control functions #####
- ===============================================================================
- [..]
- (#) When the system is powered on, the POR monitors VDD supply. Once VDD is
- above the POR threshold level, the voltage regulator is enabled in the
- default supply configuration:
- (+) The Voltage converter output level is set at 1V0 in accordance with
- the VOS3 level configured in PWR (D3/SRD) domain control register
- (PWR_D3CR/PWR_SRDCR).
- (+) The system is kept in reset mode as long as VCORE is not ok.
- (+) Once VCORE is ok, the system is taken out of reset and the HSI
- oscillator is enabled.
- (+) Once the oscillator is stable, the system is initialized: Flash memory
- and option bytes are loaded and the CPU starts in Run* mode.
- (+) The software shall then initialize the system including supply
- configuration programming using the HAL_PWREx_ConfigSupply().
- (+) Once the supply configuration has been configured, the
- HAL_PWREx_ConfigSupply() function checks the ACTVOSRDY bit in PWR
- control status register 1 (PWR_CSR1) to guarantee a valid voltage
- levels:
- (++) As long as ACTVOSRDY indicates that voltage levels are invalid, the
- system is in limited Run* mode, write accesses to the RAMs are not
- permitted and VOS shall not be changed.
- (++) Once ACTVOSRDY indicates that voltage levels are valid, the system
- is in normal Run mode, write accesses to RAMs are allowed and VOS
- can be changed.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Configure the system Power Supply.
- * @param SupplySource : Specifies the Power Supply source to set after a
- * system startup.
- * This parameter can be one of the following values :
- * @arg PWR_DIRECT_SMPS_SUPPLY : The SMPS supplies the Vcore Power
- * Domains. The LDO is Bypassed.
- * @arg PWR_SMPS_1V8_SUPPLIES_LDO : The SMPS 1.8V output supplies
- * the LDO. The Vcore Power Domains
- * are supplied from the LDO.
- * @arg PWR_SMPS_2V5_SUPPLIES_LDO : The SMPS 2.5V output supplies
- * the LDO. The Vcore Power Domains
- * are supplied from the LDO.
- * @arg PWR_SMPS_1V8_SUPPLIES_EXT_AND_LDO : The SMPS 1.8V output
- * supplies external
- * circuits and the LDO.
- * The Vcore Power Domains
- * are supplied from the
- * LDO.
- * @arg PWR_SMPS_2V5_SUPPLIES_EXT_AND_LDO : The SMPS 2.5V output
- * supplies external
- * circuits and the LDO.
- * The Vcore Power Domains
- * are supplied from the
- * LDO.
- * @arg PWR_SMPS_1V8_SUPPLIES_EXT : The SMPS 1.8V output supplies
- * external circuits. The LDO is
- * Bypassed. The Vcore Power
- * Domains are supplied from
- * external source.
- * @arg PWR_SMPS_2V5_SUPPLIES_EXT : The SMPS 2.5V output supplies
- * external circuits. The LDO is
- * Bypassed. The Vcore Power
- * Domains are supplied from
- * external source.
- * @arg PWR_LDO_SUPPLY : The LDO regulator supplies the Vcore Power
- * Domains. The SMPS regulator is Bypassed.
- * @arg PWR_EXTERNAL_SOURCE_SUPPLY : The SMPS and the LDO are
- * Bypassed. The Vcore Power
- * Domains are supplied from
- * external source.
- * @note The PWR_LDO_SUPPLY and PWR_EXTERNAL_SOURCE_SUPPLY are used by all
- * H7 lines.
- * The PWR_DIRECT_SMPS_SUPPLY, PWR_SMPS_1V8_SUPPLIES_LDO,
- * PWR_SMPS_2V5_SUPPLIES_LDO, PWR_SMPS_1V8_SUPPLIES_EXT_AND_LDO,
- * PWR_SMPS_2V5_SUPPLIES_EXT_AND_LDO, PWR_SMPS_1V8_SUPPLIES_EXT and
- * PWR_SMPS_2V5_SUPPLIES_EXT are used only for lines that supports SMPS
- * regulator.
- * @retval HAL status.
- */
-HAL_StatusTypeDef HAL_PWREx_ConfigSupply (uint32_t SupplySource)
-{
- uint32_t tickstart;
-
- /* Check the parameters */
- assert_param (IS_PWR_SUPPLY (SupplySource));
-
- /* Check if supply source was configured */
-#if defined (PWR_FLAG_SCUEN)
- if (__HAL_PWR_GET_FLAG (PWR_FLAG_SCUEN) == 0U)
-#else
- if ((PWR->CR3 & (PWR_CR3_SMPSEN | PWR_CR3_LDOEN | PWR_CR3_BYPASS)) != (PWR_CR3_SMPSEN | PWR_CR3_LDOEN))
-#endif /* defined (PWR_FLAG_SCUEN) */
- {
- /* Check supply configuration */
- if ((PWR->CR3 & PWR_SUPPLY_CONFIG_MASK) != SupplySource)
- {
- /* Supply configuration update locked, can't apply a new supply config */
- return HAL_ERROR;
- }
- else
- {
- /* Supply configuration update locked, but new supply configuration
- matches with old supply configuration : nothing to do
- */
- return HAL_OK;
- }
- }
-
- /* Set the power supply configuration */
- MODIFY_REG (PWR->CR3, PWR_SUPPLY_CONFIG_MASK, SupplySource);
-
- /* Get tick */
- tickstart = HAL_GetTick ();
-
- /* Wait till voltage level flag is set */
- while (__HAL_PWR_GET_FLAG (PWR_FLAG_ACTVOSRDY) == 0U)
- {
- if ((HAL_GetTick () - tickstart) > PWR_FLAG_SETTING_DELAY)
- {
- return HAL_ERROR;
- }
- }
-
-#if defined (SMPS)
- /* When the SMPS supplies external circuits verify that SDEXTRDY flag is set */
- if ((SupplySource == PWR_SMPS_1V8_SUPPLIES_EXT_AND_LDO) ||
- (SupplySource == PWR_SMPS_2V5_SUPPLIES_EXT_AND_LDO) ||
- (SupplySource == PWR_SMPS_1V8_SUPPLIES_EXT) ||
- (SupplySource == PWR_SMPS_2V5_SUPPLIES_EXT))
- {
- /* Get the current tick number */
- tickstart = HAL_GetTick ();
-
- /* Wait till SMPS external supply ready flag is set */
- while (__HAL_PWR_GET_FLAG (PWR_FLAG_SMPSEXTRDY) == 0U)
- {
- if ((HAL_GetTick () - tickstart) > PWR_FLAG_SETTING_DELAY)
- {
- return HAL_ERROR;
- }
- }
- }
-#endif /* defined (SMPS) */
-
- return HAL_OK;
-}
-
-/**
- * @brief Get the power supply configuration.
- * @retval The supply configuration.
- */
-uint32_t HAL_PWREx_GetSupplyConfig (void)
-{
- return (PWR->CR3 & PWR_SUPPLY_CONFIG_MASK);
-}
-
-/**
- * @brief Configure the main internal regulator output voltage.
- * @note For STM32H7x3, STM32H7x5, STM32H7x7, STM32H742 and STM32H750 lines,
- * configuring Voltage Scale 0 is only possible when Vcore is supplied
- * from LDO (Low DropOut). The SYSCFG Clock must be enabled through
- * __HAL_RCC_SYSCFG_CLK_ENABLE() macro before configuring Voltage
- * Scale 0.
- * @param VoltageScaling : Specifies the regulator output voltage to achieve
- * a tradeoff between performance and power
- * consumption.
- * This parameter can be one of the following values :
- * @arg PWR_REGULATOR_VOLTAGE_SCALE0 : Regulator voltage output
- * Scale 0 mode.
- * @arg PWR_REGULATOR_VOLTAGE_SCALE1 : Regulator voltage output
- * range 1 mode.
- * @arg PWR_REGULATOR_VOLTAGE_SCALE2 : Regulator voltage output
- * range 2 mode.
- * @arg PWR_REGULATOR_VOLTAGE_SCALE3 : Regulator voltage output
- * range 3 mode.
- * @retval HAL Status
- */
-HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling (uint32_t VoltageScaling)
-{
- uint32_t tickstart;
-
- /* Check the parameters */
- assert_param (IS_PWR_REGULATOR_VOLTAGE (VoltageScaling));
-
- /* Get the voltage scaling */
- if ((PWR->CSR1 & PWR_CSR1_ACTVOS) == VoltageScaling)
- {
- /* Old and new voltage scaling configuration match : nothing to do */
- return HAL_OK;
- }
-
-#if defined (PWR_SRDCR_VOS)
- /* Set the voltage range */
- MODIFY_REG (PWR->SRDCR, PWR_SRDCR_VOS, VoltageScaling);
-#else
- if (VoltageScaling == PWR_REGULATOR_VOLTAGE_SCALE0)
- {
- if ((PWR->CR3 & PWR_CR3_LDOEN) == PWR_CR3_LDOEN)
- {
- /* Set the voltage range */
- MODIFY_REG (PWR->D3CR, PWR_D3CR_VOS, PWR_REGULATOR_VOLTAGE_SCALE1);
-
- /* Get tick */
- tickstart = HAL_GetTick ();
-
- /* Wait till voltage level flag is set */
- while (__HAL_PWR_GET_FLAG (PWR_FLAG_ACTVOSRDY) == 0U)
- {
- if ((HAL_GetTick () - tickstart) > PWR_FLAG_SETTING_DELAY)
- {
- return HAL_ERROR;
- }
- }
-
- /* Enable the PWR overdrive */
- SET_BIT (SYSCFG->PWRCR, SYSCFG_PWRCR_ODEN);
- }
- else
- {
- /* The voltage scale 0 is only possible when LDO regulator is enabled */
- return HAL_ERROR;
- }
- }
- else
- {
- if ((PWR->CSR1 & PWR_CSR1_ACTVOS) == PWR_REGULATOR_VOLTAGE_SCALE1)
- {
- if ((SYSCFG->PWRCR & SYSCFG_PWRCR_ODEN) != 0U)
- {
- /* Disable the PWR overdrive */
- CLEAR_BIT(SYSCFG->PWRCR, SYSCFG_PWRCR_ODEN);
-
- /* Get tick */
- tickstart = HAL_GetTick ();
-
- /* Wait till voltage level flag is set */
- while (__HAL_PWR_GET_FLAG (PWR_FLAG_ACTVOSRDY) == 0U)
- {
- if ((HAL_GetTick () - tickstart) > PWR_FLAG_SETTING_DELAY)
- {
- return HAL_ERROR;
- }
- }
- }
- }
-
- /* Set the voltage range */
- MODIFY_REG (PWR->D3CR, PWR_D3CR_VOS, VoltageScaling);
- }
-#endif /* defined (PWR_SRDCR_VOS) */
-
- /* Get tick */
- tickstart = HAL_GetTick ();
-
- /* Wait till voltage level flag is set */
- while (__HAL_PWR_GET_FLAG (PWR_FLAG_ACTVOSRDY) == 0U)
- {
- if ((HAL_GetTick() - tickstart) > PWR_FLAG_SETTING_DELAY)
- {
- return HAL_ERROR;
- }
- }
-
- return HAL_OK;
-}
-
-/**
- * @brief Get the main internal regulator output voltage. Reflecting the last
- * VOS value applied to the PMU.
- * @retval The current applied VOS selection.
- */
-uint32_t HAL_PWREx_GetVoltageRange (void)
-{
- /* Get the active voltage scaling */
- return (PWR->CSR1 & PWR_CSR1_ACTVOS);
-}
-
-/**
- * @brief Configure the main internal regulator output voltage in STOP mode.
- * @param VoltageScaling : Specifies the regulator output voltage when the
- * system enters Stop mode to achieve a tradeoff between performance
- * and power consumption.
- * This parameter can be one of the following values:
- * @arg PWR_REGULATOR_SVOS_SCALE3 : Regulator voltage output range
- * 3 mode.
- * @arg PWR_REGULATOR_SVOS_SCALE4 : Regulator voltage output range
- * 4 mode.
- * @arg PWR_REGULATOR_SVOS_SCALE5 : Regulator voltage output range
- * 5 mode.
- * @note The Stop mode voltage scaling for SVOS4 and SVOS5 sets the voltage
- * regulator in Low-power (LP) mode to further reduce power consumption.
- * When preselecting SVOS3, the use of the voltage regulator low-power
- * mode (LP) can be selected by LPDS register bit.
- * @note The selected SVOS4 and SVOS5 levels add an additional startup delay
- * when exiting from system Stop mode.
- * @retval HAL Status.
- */
-HAL_StatusTypeDef HAL_PWREx_ControlStopModeVoltageScaling (uint32_t VoltageScaling)
-{
- /* Check the parameters */
- assert_param (IS_PWR_STOP_MODE_REGULATOR_VOLTAGE (VoltageScaling));
-
- /* Return the stop mode voltage range */
- MODIFY_REG (PWR->CR1, PWR_CR1_SVOS, VoltageScaling);
-
- return HAL_OK;
-}
-
-/**
- * @brief Get the main internal regulator output voltage in STOP mode.
- * @retval The actual applied VOS selection.
- */
-uint32_t HAL_PWREx_GetStopModeVoltageRange (void)
-{
- /* Return the stop voltage scaling */
- return (PWR->CR1 & PWR_CR1_SVOS);
-}
-/**
- * @}
- */
-
-/** @defgroup PWREx_Exported_Functions_Group2 Low Power Control Functions
+ * @brief Power supply control functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Power supply control functions #####
+ ===============================================================================
+ [..]
+ (#) When the system is powered on, the POR monitors VDD supply. Once VDD is
+ above the POR threshold level, the voltage regulator is enabled in the
+ default supply configuration:
+ (+) The Voltage converter output level is set at 1V0 in accordance with
+ the VOS3 level configured in PWR (D3/SRD) domain control register
+ (PWR_D3CR/PWR_SRDCR).
+ (+) The system is kept in reset mode as long as VCORE is not ok.
+ (+) Once VCORE is ok, the system is taken out of reset and the HSI
+ oscillator is enabled.
+ (+) Once the oscillator is stable, the system is initialized: Flash memory
+ and option bytes are loaded and the CPU starts in Run* mode.
+ (+) The software shall then initialize the system including supply
+ configuration programming using the HAL_PWREx_ConfigSupply().
+ (+) Once the supply configuration has been configured, the
+ HAL_PWREx_ConfigSupply() function checks the ACTVOSRDY bit in PWR
+ control status register 1 (PWR_CSR1) to guarantee a valid voltage
+ levels:
+ (++) As long as ACTVOSRDY indicates that voltage levels are invalid, the
+ system is in limited Run* mode, write accesses to the RAMs are not
+ permitted and VOS shall not be changed.
+ (++) Once ACTVOSRDY indicates that voltage levels are valid, the system
+ is in normal Run mode, write accesses to RAMs are allowed and VOS
+ can be changed.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Configure the system Power Supply.
+ * @param SupplySource : Specifies the Power Supply source to set after a
+ * system startup.
+ * This parameter can be one of the following values :
+ * @arg PWR_DIRECT_SMPS_SUPPLY : The SMPS supplies the Vcore Power
+ * Domains. The LDO is Bypassed.
+ * @arg PWR_SMPS_1V8_SUPPLIES_LDO : The SMPS 1.8V output supplies
+ * the LDO. The Vcore Power Domains
+ * are supplied from the LDO.
+ * @arg PWR_SMPS_2V5_SUPPLIES_LDO : The SMPS 2.5V output supplies
+ * the LDO. The Vcore Power Domains
+ * are supplied from the LDO.
+ * @arg PWR_SMPS_1V8_SUPPLIES_EXT_AND_LDO : The SMPS 1.8V output
+ * supplies external
+ * circuits and the LDO.
+ * The Vcore Power Domains
+ * are supplied from the
+ * LDO.
+ * @arg PWR_SMPS_2V5_SUPPLIES_EXT_AND_LDO : The SMPS 2.5V output
+ * supplies external
+ * circuits and the LDO.
+ * The Vcore Power Domains
+ * are supplied from the
+ * LDO.
+ * @arg PWR_SMPS_1V8_SUPPLIES_EXT : The SMPS 1.8V output supplies
+ * external circuits. The LDO is
+ * Bypassed. The Vcore Power
+ * Domains are supplied from
+ * external source.
+ * @arg PWR_SMPS_2V5_SUPPLIES_EXT : The SMPS 2.5V output supplies
+ * external circuits. The LDO is
+ * Bypassed. The Vcore Power
+ * Domains are supplied from
+ * external source.
+ * @arg PWR_LDO_SUPPLY : The LDO regulator supplies the Vcore Power
+ * Domains. The SMPS regulator is Bypassed.
+ * @arg PWR_EXTERNAL_SOURCE_SUPPLY : The SMPS and the LDO are
+ * Bypassed. The Vcore Power
+ * Domains are supplied from
+ * external source.
+ * @note The PWR_LDO_SUPPLY and PWR_EXTERNAL_SOURCE_SUPPLY are used by all
+ * H7 lines.
+ * The PWR_DIRECT_SMPS_SUPPLY, PWR_SMPS_1V8_SUPPLIES_LDO,
+ * PWR_SMPS_2V5_SUPPLIES_LDO, PWR_SMPS_1V8_SUPPLIES_EXT_AND_LDO,
+ * PWR_SMPS_2V5_SUPPLIES_EXT_AND_LDO, PWR_SMPS_1V8_SUPPLIES_EXT and
+ * PWR_SMPS_2V5_SUPPLIES_EXT are used only for lines that supports SMPS
+ * regulator.
+ * @retval HAL status.
+ */
+HAL_StatusTypeDef HAL_PWREx_ConfigSupply (uint32_t SupplySource)
+{
+ uint32_t tickstart;
+
+ /* Check the parameters */
+ assert_param (IS_PWR_SUPPLY (SupplySource));
+
+ /* Check if supply source was configured */
+#if defined (PWR_FLAG_SCUEN)
+ if (__HAL_PWR_GET_FLAG (PWR_FLAG_SCUEN) == 0U)
+#else
+ if ((PWR->CR3 & (PWR_CR3_SMPSEN | PWR_CR3_LDOEN | PWR_CR3_BYPASS)) != (PWR_CR3_SMPSEN | PWR_CR3_LDOEN))
+#endif /* defined (PWR_FLAG_SCUEN) */
+ {
+ /* Check supply configuration */
+ if ((PWR->CR3 & PWR_SUPPLY_CONFIG_MASK) != SupplySource)
+ {
+ /* Supply configuration update locked, can't apply a new supply config */
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Supply configuration update locked, but new supply configuration
+ matches with old supply configuration : nothing to do
+ */
+ return HAL_OK;
+ }
+ }
+
+ /* Set the power supply configuration */
+ MODIFY_REG (PWR->CR3, PWR_SUPPLY_CONFIG_MASK, SupplySource);
+
+ /* Get tick */
+ tickstart = HAL_GetTick ();
+
+ /* Wait till voltage level flag is set */
+ while (__HAL_PWR_GET_FLAG (PWR_FLAG_ACTVOSRDY) == 0U)
+ {
+ if ((HAL_GetTick () - tickstart) > PWR_FLAG_SETTING_DELAY)
+ {
+ return HAL_ERROR;
+ }
+ }
+
+#if defined (SMPS)
+ /* When the SMPS supplies external circuits verify that SDEXTRDY flag is set */
+ if ((SupplySource == PWR_SMPS_1V8_SUPPLIES_EXT_AND_LDO) ||
+ (SupplySource == PWR_SMPS_2V5_SUPPLIES_EXT_AND_LDO) ||
+ (SupplySource == PWR_SMPS_1V8_SUPPLIES_EXT) ||
+ (SupplySource == PWR_SMPS_2V5_SUPPLIES_EXT))
+ {
+ /* Get the current tick number */
+ tickstart = HAL_GetTick ();
+
+ /* Wait till SMPS external supply ready flag is set */
+ while (__HAL_PWR_GET_FLAG (PWR_FLAG_SMPSEXTRDY) == 0U)
+ {
+ if ((HAL_GetTick () - tickstart) > PWR_FLAG_SETTING_DELAY)
+ {
+ return HAL_ERROR;
+ }
+ }
+ }
+#endif /* defined (SMPS) */
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Get the power supply configuration.
+ * @retval The supply configuration.
+ */
+uint32_t HAL_PWREx_GetSupplyConfig (void)
+{
+ return (PWR->CR3 & PWR_SUPPLY_CONFIG_MASK);
+}
+
+/**
+ * @brief Configure the main internal regulator output voltage.
+ * @param VoltageScaling : Specifies the regulator output voltage to achieve
+ * a tradeoff between performance and power
+ * consumption.
+ * This parameter can be one of the following values :
+ * @arg PWR_REGULATOR_VOLTAGE_SCALE0 : Regulator voltage output
+ * Scale 0 mode.
+ * @arg PWR_REGULATOR_VOLTAGE_SCALE1 : Regulator voltage output
+ * range 1 mode.
+ * @arg PWR_REGULATOR_VOLTAGE_SCALE2 : Regulator voltage output
+ * range 2 mode.
+ * @arg PWR_REGULATOR_VOLTAGE_SCALE3 : Regulator voltage output
+ * range 3 mode.
+ * @note For STM32H74x and STM32H75x lines, configuring Voltage Scale 0 is
+ * only possible when Vcore is supplied from LDO (Low DropOut). The
+ * SYSCFG Clock must be enabled through __HAL_RCC_SYSCFG_CLK_ENABLE()
+ * macro before configuring Voltage Scale 0.
+ * To enter low power mode , and if current regulator voltage is
+ * Voltage Scale 0 then first switch to Voltage Scale 1 before entering
+ * low power mode.
+ * @retval HAL Status
+ */
+HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling (uint32_t VoltageScaling)
+{
+ uint32_t tickstart;
+
+ /* Check the parameters */
+ assert_param (IS_PWR_REGULATOR_VOLTAGE (VoltageScaling));
+
+ /* Get the voltage scaling */
+ if ((PWR->CSR1 & PWR_CSR1_ACTVOS) == VoltageScaling)
+ {
+ /* Old and new voltage scaling configuration match : nothing to do */
+ return HAL_OK;
+ }
+
+#if defined (PWR_SRDCR_VOS)
+ /* Set the voltage range */
+ MODIFY_REG (PWR->SRDCR, PWR_SRDCR_VOS, VoltageScaling);
+#else
+#if defined(SYSCFG_PWRCR_ODEN) /* STM32H74xxx and STM32H75xxx lines */
+ if (VoltageScaling == PWR_REGULATOR_VOLTAGE_SCALE0)
+ {
+ if ((PWR->CR3 & PWR_CR3_LDOEN) == PWR_CR3_LDOEN)
+ {
+ /* Set the voltage range */
+ MODIFY_REG (PWR->D3CR, PWR_D3CR_VOS, PWR_REGULATOR_VOLTAGE_SCALE1);
+
+ /* Get tick */
+ tickstart = HAL_GetTick ();
+
+ /* Wait till voltage level flag is set */
+ while (__HAL_PWR_GET_FLAG (PWR_FLAG_ACTVOSRDY) == 0U)
+ {
+ if ((HAL_GetTick () - tickstart) > PWR_FLAG_SETTING_DELAY)
+ {
+ return HAL_ERROR;
+ }
+ }
+
+ /* Enable the PWR overdrive */
+ SET_BIT (SYSCFG->PWRCR, SYSCFG_PWRCR_ODEN);
+ }
+ else
+ {
+ /* The voltage scale 0 is only possible when LDO regulator is enabled */
+ return HAL_ERROR;
+ }
+ }
+ else
+ {
+ if ((PWR->CSR1 & PWR_CSR1_ACTVOS) == PWR_REGULATOR_VOLTAGE_SCALE1)
+ {
+ if ((SYSCFG->PWRCR & SYSCFG_PWRCR_ODEN) != 0U)
+ {
+ /* Disable the PWR overdrive */
+ CLEAR_BIT(SYSCFG->PWRCR, SYSCFG_PWRCR_ODEN);
+
+ /* Get tick */
+ tickstart = HAL_GetTick ();
+
+ /* Wait till voltage level flag is set */
+ while (__HAL_PWR_GET_FLAG (PWR_FLAG_ACTVOSRDY) == 0U)
+ {
+ if ((HAL_GetTick () - tickstart) > PWR_FLAG_SETTING_DELAY)
+ {
+ return HAL_ERROR;
+ }
+ }
+ }
+ }
+
+ /* Set the voltage range */
+ MODIFY_REG (PWR->D3CR, PWR_D3CR_VOS, VoltageScaling);
+ }
+#else /* STM32H72xxx and STM32H73xxx lines */
+ /* Set the voltage range */
+ MODIFY_REG(PWR->D3CR, PWR_D3CR_VOS, VoltageScaling);
+#endif /* defined (SYSCFG_PWRCR_ODEN) */
+#endif /* defined (PWR_SRDCR_VOS) */
+
+ /* Get tick */
+ tickstart = HAL_GetTick ();
+
+ /* Wait till voltage level flag is set */
+ while (__HAL_PWR_GET_FLAG (PWR_FLAG_ACTVOSRDY) == 0U)
+ {
+ if ((HAL_GetTick() - tickstart) > PWR_FLAG_SETTING_DELAY)
+ {
+ return HAL_ERROR;
+ }
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Get the main internal regulator output voltage. Reflecting the last
+ * VOS value applied to the PMU.
+ * @retval The current applied VOS selection.
+ */
+uint32_t HAL_PWREx_GetVoltageRange (void)
+{
+ /* Get the active voltage scaling */
+ return (PWR->CSR1 & PWR_CSR1_ACTVOS);
+}
+
+/**
+ * @brief Configure the main internal regulator output voltage in STOP mode.
+ * @param VoltageScaling : Specifies the regulator output voltage when the
+ * system enters Stop mode to achieve a tradeoff between performance
+ * and power consumption.
+ * This parameter can be one of the following values:
+ * @arg PWR_REGULATOR_SVOS_SCALE3 : Regulator voltage output range
+ * 3 mode.
+ * @arg PWR_REGULATOR_SVOS_SCALE4 : Regulator voltage output range
+ * 4 mode.
+ * @arg PWR_REGULATOR_SVOS_SCALE5 : Regulator voltage output range
+ * 5 mode.
+ * @note The Stop mode voltage scaling for SVOS4 and SVOS5 sets the voltage
+ * regulator in Low-power (LP) mode to further reduce power consumption.
+ * When preselecting SVOS3, the use of the voltage regulator low-power
+ * mode (LP) can be selected by LPDS register bit.
+ * @note The selected SVOS4 and SVOS5 levels add an additional startup delay
+ * when exiting from system Stop mode.
+ * @retval HAL Status.
+ */
+HAL_StatusTypeDef HAL_PWREx_ControlStopModeVoltageScaling (uint32_t VoltageScaling)
+{
+ /* Check the parameters */
+ assert_param (IS_PWR_STOP_MODE_REGULATOR_VOLTAGE (VoltageScaling));
+
+ /* Return the stop mode voltage range */
+ MODIFY_REG (PWR->CR1, PWR_CR1_SVOS, VoltageScaling);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Get the main internal regulator output voltage in STOP mode.
+ * @retval The actual applied VOS selection.
+ */
+uint32_t HAL_PWREx_GetStopModeVoltageRange (void)
+{
+ /* Return the stop voltage scaling */
+ return (PWR->CR1 & PWR_CR1_SVOS);
+}
+/**
+ * @}
+ */
+
+/** @defgroup PWREx_Exported_Functions_Group2 Low Power Control Functions
* @ingroup RTEMSBSPsARMSTM32H7
- * @brief Low power control functions
- *
-@verbatim
- ===============================================================================
- ##### Low power control functions #####
- ===============================================================================
-
- *** Domains Low Power modes configuration ***
- =============================================
- [..]
- This section provides the extended low power mode control APIs.
- The system presents 3 principles domains (D1, D2 and D3) that can be
- operated in low-power modes (DSTOP or DSTANDBY mode):
-
- (+) DSTOP mode to enters a domain to STOP mode:
- (++) D1 domain and/or D2 domain enters DSTOP mode only when the CPU
- subsystem is in CSTOP mode and has allocated peripheral in the
- domain.
- In DSTOP mode the domain bus matrix clock is stopped.
- (++) The system enters STOP mode using one of the following scenarios:
- (+++) D1 domain enters DSTANDBY mode (powered off) and D2, D3 domains
- enter DSTOP mode.
- (+++) D2 domain enters DSTANDBY mode (powered off) and D1, D3 domains
- enter DSTOP mode.
- (+++) D3 domain enters DSTANDBY mode (powered off) and D1, D2 domains
- enter DSTOP mode.
- (+++) D1 and D2 domains enter DSTANDBY mode (powered off) and D3 domain
- enters DSTOP mode.
- (+++) D1 and D3 domains enter DSTANDBY mode (powered off) and D2 domain
- enters DSTOP mode.
- (+++) D2 and D3 domains enter DSTANDBY mode (powered off) and D1 domain
- enters DSTOP mode.
- (+++) D1, D2 and D3 domains enter DSTOP mode.
- (++) When the system enters STOP mode, the clocks are stopped and the
- regulator is running in main or low power mode.
- (++) D3 domain can be kept in Run mode regardless of the CPU status when
- enter STOP mode by using HAL_PWREx_ConfigD3Domain(D3State) function.
-
- (+) DSTANDBY mode to enters a domain to STANDBY mode:
- (++) The DSTANDBY mode is entered when the PDDS_Dn bit in PWR CPU control
- register (PWR_CPUCR) for the Dn domain selects Standby mode.
- (++) The system enters STANDBY mode only when D1, D2 and D3 domains enter
- DSTANDBY mode. Consequently the VCORE supply regulator is powered
- off.
-
- *** DSTOP mode ***
- ==================
- [..]
- In DStop mode the domain bus matrix clock is stopped.
- The Flash memory can enter low-power Stop mode when it is enabled through
- FLPS in PWR_CR1 register. This allows a trade-off between domain DStop
- restart time and low power consumption.
- [..]
- In DStop mode domain peripherals using the LSI or LSE clock and
- peripherals having a kernel clock request are still able to operate.
- [..]
- Before entering DSTOP mode it is recommended to call SCB_CleanDCache
- function in order to clean the D-Cache and guarantee the data integrity
- for the SRAM memories.
-
- (+) Entry:
- The DSTOP mode is entered using the HAL_PWREx_EnterSTOPMode(Regulator,
- STOPEntry, Domain) function with:
- (++) Regulator:
- (+++) PWR_MAINREGULATOR_ON : Main regulator ON.
- (+++) PWR_LOWPOWERREGULATOR_ON : Low Power regulator ON.
- (++) STOPEntry:
- (+++) PWR_STOPENTRY_WFI : enter STOP mode with WFI instruction
- (+++) PWR_STOPENTRY_WFE : enter STOP mode with WFE instruction
- (++) Domain:
- (+++) PWR_D1_DOMAIN : Enters D1 domain to DSTOP mode.
- (+++) PWR_D2_DOMAIN : Enters D2 domain to DSTOP mode.
- (+++) PWR_D3_DOMAIN : Enters D3 domain to DSTOP mode.
-
- (+) Exit:
- Any EXTI Line (Internal or External) configured in Interrupt/Event mode.
-
- *** DSTANDBY mode ***
- =====================
- [..]
- In DStandby mode:
- (+) The domain bus matrix clock is stopped.
- (+) The domain is powered down and the domain RAM and register contents
- are lost.
- [..]
- Before entering DSTANDBY mode it is recommended to call SCB_CleanDCache
- function in order to clean the D-Cache and guarantee the data integrity
- for the SRAM memories.
-
- (+) Entry:
- The DSTANDBY mode is entered using the HAL_PWREx_EnterSTANDBYMode
- (Domain) function with:
- (++) Domain:
- (+++) PWR_D1_DOMAIN : Enters D1 domain to DSTANDBY mode.
- (+++) PWR_D2_DOMAIN : Enters D2 domain to DSTANDBY mode.
- (+++) PWR_D3_DOMAIN : Enters D3 domain to DSTANDBY mode.
-
- (+) Exit:
- WKUP pin rising or falling edge, RTC alarm (Alarm A and Alarm B), RTC
- wakeup, tamper event, time stamp event, external reset in NRST pin,
- IWDG reset.
-
- *** Keep D3/SRD in RUN mode ***
- ===============================
- [..]
- D3/SRD domain can be kept in Run mode regardless of the CPU status when
- entering STOP mode by using HAL_PWREx_ConfigD3Domain(D3State) function
- with :
- (+) D3State:
- (++) PWR_D3_DOMAIN_STOP : D3/SDR domain follows the CPU sub-system
- mode.
- (++) PWR_D3_DOMAIN_RUN : D3/SRD domain remains in Run mode regardless
- of CPU subsystem mode.
-
- *** FLASH Power Down configuration ****
- =======================================
- [..]
- By setting the FLPS bit in the PWR_CR1 register using the
- HAL_PWREx_EnableFlashPowerDown() function, the Flash memory also enters
- power down mode when the device enters STOP mode. When the Flash memory is
- in power down mode, an additional startup delay is incurred when waking up
- from STOP mode.
-
- *** Wakeup Pins configuration ****
- ===================================
- [..]
- Wakeup pins allow the system to exit from Standby mode. The configuration
- of wakeup pins is done with the HAL_PWREx_EnableWakeUpPin(sPinParams)
- function with:
- (+) sPinParams: structure to enable and configure a wakeup pin:
- (++) WakeUpPin: Wakeup pin to be enabled.
- (++) PinPolarity: Wakeup pin polarity (rising or falling edge).
- (++) PinPull: Wakeup pin pull (no pull, pull-up or pull-down).
- [..]
- The wakeup pins are internally connected to the EXTI lines [55-60] to
- generate an interrupt if enabled. The EXTI lines configuration is done by
- the HAL_EXTI_Dx_EventInputConfig() functions defined in the stm32h7xxhal.c
- file.
- [..]
- When a wakeup pin event is received the HAL_PWREx_WAKEUP_PIN_IRQHandler is
- called and the appropriate flag is set in the PWR_WKUPFR register. Then in
- the HAL_PWREx_WAKEUP_PIN_IRQHandler function the wakeup pin flag will be
- cleared and the appropriate user callback will be called. The user can add
- his own code by customization of function pointer HAL_PWREx_WKUPx_Callback.
-
-@endverbatim
- * @{
- */
-
-#if defined (PWR_CPUCR_RETDS_CD)
-/**
- * @brief Enter the system to STOP mode with main domain in DSTOP2.
- * @note In STOP mode, the domain bus matrix clock is stalled.
- * @note In STOP mode, memories and registers are maintained and peripherals
- * in CPU domain are no longer operational.
- * @note All clocks in the VCORE domain are stopped, the PLL, the HSI and the
- * HSE oscillators are disabled. Only Peripherals that have wakeup
- * capability can switch on the HSI to receive a frame, and switch off
- * the HSI after receiving the frame if it is not a wakeup frame. In
- * this case the HSI clock is propagated only to the peripheral
- * requesting it.
- * @note When exiting STOP mode by issuing an interrupt or a wakeup event,
- * the HSI RC oscillator is selected as system clock if STOPWUCK bit in
- * RCC_CFGR register is set.
- * @param Regulator : Specifies the regulator state in STOP mode.
- * This parameter can be one of the following values:
- * @arg PWR_MAINREGULATOR_ON : STOP mode with regulator ON.
- * @arg PWR_LOWPOWERREGULATOR_ON : STOP mode with low power
- * regulator ON.
- * @param STOPEntry : Specifies if STOP mode in entered with WFI or WFE
- * intrinsic instruction.
- * This parameter can be one of the following values:
- * @arg PWR_STOPENTRY_WFI : Enter STOP mode with WFI instruction.
- * @arg PWR_STOPENTRY_WFE : Enter STOP mode with WFE instruction.
- * @retval None.
- */
-void HAL_PWREx_EnterSTOP2Mode (uint32_t Regulator, uint8_t STOPEntry)
-{
- /* Check the parameters */
- assert_param (IS_PWR_REGULATOR (Regulator));
- assert_param (IS_PWR_STOP_ENTRY (STOPEntry));
-
- /* Select the regulator state in Stop mode */
- MODIFY_REG (PWR->CR1, PWR_CR1_LPDS, Regulator);
-
- /* Go to DStop2 mode (deep retention) when CPU domain enters Deepsleep */
- SET_BIT (PWR->CPUCR, PWR_CPUCR_RETDS_CD);
-
- /* Keep DSTOP mode when SmartRun domain enters Deepsleep */
- CLEAR_BIT (PWR->CPUCR, PWR_CPUCR_PDDS_SRD);
-
- /* Set SLEEPDEEP bit of Cortex System Control Register */
- SET_BIT (SCB->SCR, SCB_SCR_SLEEPDEEP_Msk);
-
- /* Ensure that all instructions are done before entering STOP mode */
- __ISB ();
- __DSB ();
-
- /* Select Stop mode entry */
- if (STOPEntry == PWR_STOPENTRY_WFI)
- {
- /* Request Wait For Interrupt */
- __WFI ();
- }
- else
- {
- /* Request Wait For Event */
- __WFE ();
- }
-
- /* Clear SLEEPDEEP bit of Cortex-Mx in the System Control Register */
- CLEAR_BIT (SCB->SCR, SCB_SCR_SLEEPDEEP_Msk);
-}
-#endif /* defined (PWR_CPUCR_RETDS_CD) */
-
-/**
- * @brief Enter a Domain to DSTOP mode.
- * @note This API gives flexibility to manage independently each domain STOP
- * mode. For dual core lines, this API should be executed with the
- * corresponding Cortex-Mx to enter domain to DSTOP mode. When it is
- * executed by all available Cortex-Mx, the system enter to STOP mode.
- * For single core lines, calling this API with domain parameter set to
- * PWR_D1_DOMAIN (D1/CD), the whole system will enter in STOP mode
- * independently of PWR_CPUCR_PDDS_Dx bits values if RUN_D3 bit in the
- * CPUCR_RUN_D3 is cleared.
- * @note In DStop mode the domain bus matrix clock is stopped.
- * @note The system D3/SRD domain enter Stop mode only when the CPU subsystem
- * is in CStop mode, the EXTI wakeup sources are inactive and at least
- * one PDDS_Dn bit in PWR CPU control register (PWR_CPUCR) for
- * any domain request Stop.
- * @note Before entering DSTOP mode it is recommended to call SCB_CleanDCache
- * function in order to clean the D-Cache and guarantee the data
- * integrity for the SRAM memories.
- * @note In System Stop mode, the domain peripherals that use the LSI or LSE
- * clock, and the peripherals that have a kernel clock request to
- * select HSI or CSI as source, are still able to operate.
- * @param Regulator : Specifies the regulator state in STOP mode.
- * This parameter can be one of the following values:
- * @arg PWR_MAINREGULATOR_ON : STOP mode with regulator ON.
- * @arg PWR_LOWPOWERREGULATOR_ON : STOP mode with low power
- * regulator ON.
- * @param STOPEntry : Specifies if STOP mode in entered with WFI or WFE
- * intrinsic instruction.
- * This parameter can be one of the following values:
- * @arg PWR_STOPENTRY_WFI : Enter STOP mode with WFI instruction.
- * @arg PWR_STOPENTRY_WFE : Enter STOP mode with WFE instruction.
- * @param Domain : Specifies the Domain to enter in DSTOP mode.
- * This parameter can be one of the following values:
- * @arg PWR_D1_DOMAIN : Enter D1/CD Domain to DSTOP mode.
- * @arg PWR_D2_DOMAIN : Enter D2 Domain to DSTOP mode.
- * @arg PWR_D3_DOMAIN : Enter D3/SRD Domain to DSTOP mode.
- * @retval None.
- */
-void HAL_PWREx_EnterSTOPMode (uint32_t Regulator, uint8_t STOPEntry, uint32_t Domain)
-{
- /* Check the parameters */
- assert_param (IS_PWR_REGULATOR (Regulator));
- assert_param (IS_PWR_STOP_ENTRY (STOPEntry));
- assert_param (IS_PWR_DOMAIN (Domain));
-
- /* Select the regulator state in Stop mode */
- MODIFY_REG (PWR->CR1, PWR_CR1_LPDS, Regulator);
-
- /* Select the domain Power Down DeepSleep */
- if (Domain == PWR_D1_DOMAIN)
- {
-#if defined (DUAL_CORE)
- /* Check current core */
- if (HAL_GetCurrentCPUID () != CM7_CPUID)
- {
- /*
- When the domain selected and the cortex-mx don't match, entering stop
- mode will not be performed
- */
- return;
- }
-#endif /* defined (DUAL_CORE) */
-
- /* Keep DSTOP mode when D1/CD domain enters Deepsleep */
- CLEAR_BIT (PWR->CPUCR, PWR_CPUCR_PDDS_D1);
-
- /* Set SLEEPDEEP bit of Cortex System Control Register */
- SET_BIT (SCB->SCR, SCB_SCR_SLEEPDEEP_Msk);
-
- /* Ensure that all instructions are done before entering STOP mode */
- __DSB ();
- __ISB ();
-
- /* Select Stop mode entry */
- if (STOPEntry == PWR_STOPENTRY_WFI)
- {
- /* Request Wait For Interrupt */
- __WFI ();
- }
- else
- {
- /* Request Wait For Event */
- __WFE ();
- }
-
- /* Clear SLEEPDEEP bit of Cortex-Mx in the System Control Register */
- CLEAR_BIT (SCB->SCR, SCB_SCR_SLEEPDEEP_Msk);
- }
-#if defined (PWR_CPUCR_PDDS_D2)
- else if (Domain == PWR_D2_DOMAIN)
- {
- /* Keep DSTOP mode when D2 domain enters Deepsleep */
- CLEAR_BIT (PWR->CPUCR, PWR_CPUCR_PDDS_D2);
-
-#if defined (DUAL_CORE)
- /* Check current core */
- if (HAL_GetCurrentCPUID () != CM4_CPUID)
- {
- /*
- When the domain selected and the cortex-mx don't match, entering stop
- mode will not be performed
- */
- return;
- }
-
- /* Set SLEEPDEEP bit of Cortex System Control Register */
- SET_BIT (SCB->SCR, SCB_SCR_SLEEPDEEP_Msk);
-
- /* Ensure that all instructions are done before entering STOP mode */
- __DSB ();
- __ISB ();
-
- /* Select Stop mode entry */
- if (STOPEntry == PWR_STOPENTRY_WFI)
- {
- /* Request Wait For Interrupt */
- __WFI ();
- }
- else
- {
- /* Request Wait For Event */
- __WFE ();
- }
-
- /* Clear SLEEPDEEP bit of Cortex-Mx in the System Control Register */
- CLEAR_BIT (SCB->SCR, SCB_SCR_SLEEPDEEP_Msk);
-#endif /* defined (DUAL_CORE) */
- }
-#endif /* defined (PWR_CPUCR_PDDS_D2) */
- else
- {
- /* Keep DSTOP mode when D3/SRD domain enters Deepsleep */
- CLEAR_BIT (PWR->CPUCR, PWR_CPUCR_PDDS_D3);
- }
-}
-
-/**
- * @brief Clear pending event.
- * @note This API clears the pending event in order to enter a given CPU
- * to CSLEEP or CSTOP. It should be called just before APIs performing
- * enter low power mode using Wait For Event request.
- * @retval None.
- */
-void HAL_PWREx_ClearPendingEvent (void)
-{
-#if defined (DUAL_CORE)
- /* Check the current Core */
- if (HAL_GetCurrentCPUID () == CM7_CPUID)
- {
- __WFE ();
- }
- else
- {
- __SEV ();
- __WFE ();
- }
-#else
- __WFE ();
-#endif /* defined (DUAL_CORE) */
-}
-
-/**
- * @brief Enter a Domain to DSTANDBY mode.
- * @note This API gives flexibility to manage independently each domain
- * STANDBY mode. For dual core lines, this API should be executed with
- * the corresponding Cortex-Mx to enter domain to DSTANDBY mode. When
- * it is executed by all available Cortex-Mx, the system enter STANDBY
- * mode.
- * For single core lines, calling this API with D1/SRD the selected
- * domain will enter the whole system in STOP if PWR_CPUCR_PDDS_D3 = 0
- * and enter the whole system in STANDBY if PWR_CPUCR_PDDS_D3 = 1.
- * @note The DStandby mode is entered when all PDDS_Dn bits in PWR_CPUCR for
- * the Dn domain select Standby mode. When the system enters Standby
- * mode, the voltage regulator is disabled.
- * @note When D2 or D3 domain is in DStandby mode and the CPU sets the
- * domain PDDS_Dn bit to select Stop mode, the domain remains in
- * DStandby mode. The domain will only exit DStandby when the CPU
- * allocates a peripheral in the domain.
- * @note The system D3/SRD domain enters Standby mode only when the D1 and D2
- * domain are in DStandby.
- * @note Before entering DSTANDBY mode it is recommended to call
- * SCB_CleanDCache function in order to clean the D-Cache and guarantee
- * the data integrity for the SRAM memories.
- * @param Domain : Specifies the Domain to enter to STANDBY mode.
- * This parameter can be one of the following values:
- * @arg PWR_D1_DOMAIN: Enter D1/CD Domain to DSTANDBY mode.
- * @arg PWR_D2_DOMAIN: Enter D2 Domain to DSTANDBY mode.
- * @arg PWR_D3_DOMAIN: Enter D3/SRD Domain to DSTANDBY mode.
- * @retval None
- */
-void HAL_PWREx_EnterSTANDBYMode (uint32_t Domain)
-{
- /* Check the parameters */
- assert_param (IS_PWR_DOMAIN (Domain));
-
- /* Select the domain Power Down DeepSleep */
- if (Domain == PWR_D1_DOMAIN)
- {
-#if defined (DUAL_CORE)
- /* Check current core */
- if (HAL_GetCurrentCPUID () != CM7_CPUID)
- {
- /*
- When the domain selected and the cortex-mx don't match, entering
- standby mode will not be performed
- */
- return;
- }
-#endif /* defined (DUAL_CORE) */
-
- /* Allow DSTANDBY mode when D1/CD domain enters Deepsleep */
- SET_BIT (PWR-> CPUCR, PWR_CPUCR_PDDS_D1);
-
-#if defined (DUAL_CORE)
- /* Allow DSTANDBY mode when D1/CD domain enters Deepsleep */
- SET_BIT (PWR-> CPU2CR, PWR_CPU2CR_PDDS_D1);
-#endif /*DUAL_CORE*/
-
- /* Set SLEEPDEEP bit of Cortex System Control Register */
- SET_BIT (SCB->SCR, SCB_SCR_SLEEPDEEP_Msk);
-
- /* This option is used to ensure that store operations are completed */
-#if defined (__CC_ARM)
- __force_stores ();
-#endif /* defined (__CC_ARM) */
-
- /* Request Wait For Interrupt */
- __WFI ();
- }
-#if defined (PWR_CPUCR_PDDS_D2)
- else if (Domain == PWR_D2_DOMAIN)
- {
- /* Allow DSTANDBY mode when D2 domain enters Deepsleep */
- SET_BIT (PWR-> CPUCR, PWR_CPUCR_PDDS_D2);
-
-#if defined (DUAL_CORE)
- /* Check current core */
- if (HAL_GetCurrentCPUID () != CM4_CPUID)
- {
- /*
- When the domain selected and the cortex-mx don't match, entering
- standby mode will not be performed
- */
- return;
- }
-
- /* Allow DSTANDBY mode when D2 domain enters Deepsleep */
- SET_BIT (PWR-> CPU2CR, PWR_CPU2CR_PDDS_D2);
-
- /* Set SLEEPDEEP bit of Cortex System Control Register */
- SET_BIT (SCB->SCR, SCB_SCR_SLEEPDEEP_Msk);
-
- /* This option is used to ensure that store operations are completed */
-#if defined (__CC_ARM)
- __force_stores ();
-#endif /* defined (__CC_ARM) */
-
- /* Request Wait For Interrupt */
- __WFI ();
-#endif /* defined (DUAL_CORE) */
- }
-#endif /* defined (PWR_CPUCR_PDDS_D2) */
- else
- {
- /* Allow DSTANDBY mode when D3/SRD domain enters Deepsleep */
- SET_BIT (PWR-> CPUCR, PWR_CPUCR_PDDS_D3);
-
-#if defined (DUAL_CORE)
- /* Allow DSTANDBY mode when D3/SRD domain enters Deepsleep */
- SET_BIT (PWR-> CPU2CR, PWR_CPU2CR_PDDS_D3);
-#endif /* defined (DUAL_CORE) */
- }
-}
-
-/**
- * @brief Configure the D3/SRD Domain state when the System in low power mode.
- * @param D3State : Specifies the D3/SRD state.
- * This parameter can be one of the following values :
- * @arg PWR_D3_DOMAIN_STOP : D3/SRD domain will follow the most deep
- * CPU sub-system low power mode.
- * @arg PWR_D3_DOMAIN_RUN : D3/SRD domain will stay in RUN mode
- * regardless of the CPU sub-system low
- * power mode.
- * @retval None
- */
-void HAL_PWREx_ConfigD3Domain (uint32_t D3State)
-{
- /* Check the parameter */
- assert_param (IS_D3_STATE (D3State));
-
- /* Keep D3/SRD in run mode */
- MODIFY_REG (PWR->CPUCR, PWR_CPUCR_RUN_D3, D3State);
-}
-
-#if defined (DUAL_CORE)
-/**
- * @brief Clear HOLD2F, HOLD1F, STOPF, SBF, SBF_D1, and SBF_D2 flags for a
- * given domain.
- * @param DomainFlags : Specifies the Domain flags to be cleared.
- * This parameter can be one of the following values:
- * @arg PWR_D1_DOMAIN_FLAGS : Clear D1 Domain flags.
- * @arg PWR_D2_DOMAIN_FLAGS : Clear D2 Domain flags.
- * @arg PWR_ALL_DOMAIN_FLAGS : Clear D1 and D2 Domain flags.
- * @retval None.
- */
-void HAL_PWREx_ClearDomainFlags (uint32_t DomainFlags)
-{
- /* Check the parameter */
- assert_param (IS_PWR_DOMAIN_FLAG (DomainFlags));
-
- /* D1 CPU flags */
- if (DomainFlags == PWR_D1_DOMAIN_FLAGS)
- {
- /* Clear D1 domain flags (HOLD2F, STOPF, SBF, SBF_D1, and SBF_D2) */
- SET_BIT (PWR->CPUCR, PWR_CPUCR_CSSF);
- }
- /* D2 CPU flags */
- else if (DomainFlags == PWR_D2_DOMAIN_FLAGS)
- {
- /* Clear D2 domain flags (HOLD1F, STOPF, SBF, SBF_D1, and SBF_D2) */
- SET_BIT (PWR->CPU2CR, PWR_CPU2CR_CSSF);
- }
- else
- {
- /* Clear D1 domain flags (HOLD2F, STOPF, SBF, SBF_D1, and SBF_D2) */
- SET_BIT (PWR->CPUCR, PWR_CPUCR_CSSF);
- /* Clear D2 domain flags (HOLD1F, STOPF, SBF, SBF_D1, and SBF_D2) */
- SET_BIT (PWR->CPU2CR, PWR_CPU2CR_CSSF);
- }
-}
-
-/**
- * @brief Hold the CPU and their domain peripherals when exiting STOP mode.
- * @param CPU : Specifies the core to be held.
- * This parameter can be one of the following values:
- * @arg PWR_CORE_CPU1: Hold CPU1 and set CPU2 as master.
- * @arg PWR_CORE_CPU2: Hold CPU2 and set CPU1 as master.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_PWREx_HoldCore (uint32_t CPU)
-{
- HAL_StatusTypeDef status = HAL_OK;
-
- /* Check the parameters */
- assert_param (IS_PWR_CORE (CPU));
-
- /* Check CPU index */
- if (CPU == PWR_CORE_CPU2)
- {
- /* If CPU1 is not held */
- if ((PWR->CPU2CR & PWR_CPU2CR_HOLD1) != PWR_CPU2CR_HOLD1)
- {
- /* Set HOLD2 bit */
- SET_BIT (PWR->CPUCR, PWR_CPUCR_HOLD2);
- }
- else
- {
- status = HAL_ERROR;
- }
- }
- else
- {
- /* If CPU2 is not held */
- if ((PWR->CPUCR & PWR_CPUCR_HOLD2) != PWR_CPUCR_HOLD2)
- {
- /* Set HOLD1 bit */
- SET_BIT (PWR->CPU2CR, PWR_CPU2CR_HOLD1);
- }
- else
- {
- status = HAL_ERROR;
- }
- }
-
- return status;
-}
-
-/**
- * @brief Release the CPU and their domain peripherals after a wake-up from
- * STOP mode.
- * @param CPU: Specifies the core to be released.
- * This parameter can be one of the following values:
- * @arg PWR_CORE_CPU1: Release the CPU1 and their domain
- * peripherals from holding.
- * @arg PWR_CORE_CPU2: Release the CPU2 and their domain
- * peripherals from holding.
- * @retval None
- */
-void HAL_PWREx_ReleaseCore (uint32_t CPU)
-{
- /* Check the parameters */
- assert_param (IS_PWR_CORE (CPU));
-
- /* Check CPU index */
- if (CPU == PWR_CORE_CPU2)
- {
- /* Reset HOLD2 bit */
- CLEAR_BIT (PWR->CPUCR, PWR_CPUCR_HOLD2);
- }
- else
- {
- /* Reset HOLD1 bit */
- CLEAR_BIT (PWR->CPU2CR, PWR_CPU2CR_HOLD1);
- }
-}
-#endif /* defined (DUAL_CORE) */
-
-
-/**
- * @brief Enable the Flash Power Down in Stop mode.
- * @note When Flash Power Down is enabled the Flash memory enters low-power
- * mode when D1/SRD domain is in DStop mode. This feature allows to
- * obtain the best trade-off between low-power consumption and restart
- * time when exiting from DStop mode.
- * @retval None.
- */
-void HAL_PWREx_EnableFlashPowerDown (void)
-{
- /* Enable the Flash Power Down */
- SET_BIT (PWR->CR1, PWR_CR1_FLPS);
-}
-
-/**
- * @brief Disable the Flash Power Down in Stop mode.
- * @note When Flash Power Down is disabled the Flash memory is kept on
- * normal mode when D1/SRD domain is in DStop mode. This feature allows
- * to obtain the best trade-off between low-power consumption and
- * restart time when exiting from DStop mode.
- * @retval None.
- */
-void HAL_PWREx_DisableFlashPowerDown (void)
-{
- /* Disable the Flash Power Down */
- CLEAR_BIT (PWR->CR1, PWR_CR1_FLPS);
-}
-
-#if defined (PWR_CR1_SRDRAMSO)
-/**
- * @brief Enable memory block shut-off in DStop or DStop2 modes
- * @note In DStop or DStop2 mode, the content of the memory blocks is
- * maintained. Further power optimization can be obtained by switching
- * off some memory blocks. This optimization implies loss of the memory
- * content. The user can select which memory is discarded during STOP
- * mode by means of xxSO bits.
- * @param MemoryBlock : Specifies the memory block to shut-off during DStop or
- * DStop2 mode.
- * This parameter can be one of the following values:
- * @arg PWR_SRD_AHB_MEMORY_BLOCK : SmartRun domain AHB memory.
- * @arg PWR_USB_FDCAN_MEMORY_BLOCK : High-speed interfaces USB and
- * FDCAN memories.
- * @arg PWR_GFXMMU_JPEG_MEMORY_BLOCK : GFXMMU and JPEG memories.
- * @arg PWR_TCM_ECM_MEMORY_BLOCK : Instruction TCM and ETM memories.
- * @arg PWR_RAM1_AHB_MEMORY_BLOCK : AHB RAM1 memory.
- * @arg PWR_RAM2_AHB_MEMORY_BLOCK : AHB RAM2 memory.
- * @arg PWR_RAM1_AXI_MEMORY_BLOCK : AXI RAM1 memory.
- * @arg PWR_RAM2_AXI_MEMORY_BLOCK : AXI RAM2 memory.
- * @arg PWR_RAM3_AXI_MEMORY_BLOCK : AXI RAM3 memory.
- * @retval None.
- */
-void HAL_PWREx_EnableMemoryShutOff (uint32_t MemoryBlock)
-{
- /* Check the parameter */
- assert_param (IS_PWR_MEMORY_BLOCK (MemoryBlock));
-
- /* Enable memory block shut-off */
- SET_BIT (PWR->CR1, MemoryBlock);
-}
-
-/**
- * @brief Disable memory block shut-off in DStop or DStop2 modes
- * @param MemoryBlock : Specifies the memory block to keep content during
- * DStop or DStop2 mode.
- * This parameter can be one of the following values:
- * @arg PWR_SRD_AHB_MEMORY_BLOCK : SmartRun domain AHB memory.
- * @arg PWR_USB_FDCAN_MEMORY_BLOCK : High-speed interfaces USB and
- * FDCAN memories.
- * @arg PWR_GFXMMU_JPEG_MEMORY_BLOCK : GFXMMU and JPEG memories.
- * @arg PWR_TCM_ECM_MEMORY_BLOCK : Instruction TCM and ETM memories.
- * @arg PWR_RAM1_AHB_MEMORY_BLOCK : AHB RAM1 memory.
- * @arg PWR_RAM2_AHB_MEMORY_BLOCK : AHB RAM2 memory.
- * @arg PWR_RAM1_AXI_MEMORY_BLOCK : AXI RAM1 memory.
- * @arg PWR_RAM2_AXI_MEMORY_BLOCK : AXI RAM2 memory.
- * @arg PWR_RAM3_AXI_MEMORY_BLOCK : AXI RAM3 memory.
- * @retval None.
- */
-void HAL_PWREx_DisableMemoryShutOff (uint32_t MemoryBlock)
-{
- /* Check the parameter */
- assert_param (IS_PWR_MEMORY_BLOCK (MemoryBlock));
-
- /* Disable memory block shut-off */
- CLEAR_BIT (PWR->CR1, MemoryBlock);
-}
-#endif /* defined (PWR_CR1_SRDRAMSO) */
-
-/**
- * @brief Enable the Wake-up PINx functionality.
- * @param sPinParams : Pointer to a PWREx_WakeupPinTypeDef structure that
- * contains the configuration information for the wake-up
- * Pin.
- * @note For dual core devices, please ensure to configure the EXTI lines for
- * the different Cortex-Mx. All combination are allowed: wake up only
- * Cortex-M7, wake up only Cortex-M4 and wake up Cortex-M7 and
- * Cortex-M4.
- * @retval None.
- */
-void HAL_PWREx_EnableWakeUpPin (PWREx_WakeupPinTypeDef *sPinParams)
-{
- uint32_t pinConfig;
- uint32_t regMask;
- const uint32_t pullMask = PWR_WKUPEPR_WKUPPUPD1;
-
- /* Check the parameters */
- assert_param (IS_PWR_WAKEUP_PIN (sPinParams->WakeUpPin));
- assert_param (IS_PWR_WAKEUP_PIN_POLARITY (sPinParams->PinPolarity));
- assert_param (IS_PWR_WAKEUP_PIN_PULL (sPinParams->PinPull));
-
- pinConfig = sPinParams->WakeUpPin | \
- (sPinParams->PinPolarity << ((POSITION_VAL(sPinParams->WakeUpPin) + PWR_WKUPEPR_WKUPP1_Pos) & 0x1FU)) | \
- (sPinParams->PinPull << (((POSITION_VAL(sPinParams->WakeUpPin) * PWR_WAKEUP_PINS_PULL_SHIFT_OFFSET) + PWR_WKUPEPR_WKUPPUPD1_Pos) & 0x1FU));
-
- regMask = sPinParams->WakeUpPin | \
- (PWR_WKUPEPR_WKUPP1 << (POSITION_VAL(sPinParams->WakeUpPin) & 0x1FU)) | \
- (pullMask << ((POSITION_VAL(sPinParams->WakeUpPin) * PWR_WAKEUP_PINS_PULL_SHIFT_OFFSET) & 0x1FU));
-
- /* Enable and Specify the Wake-Up pin polarity and the pull configuration
- for the event detection (rising or falling edge) */
- MODIFY_REG (PWR->WKUPEPR, regMask, pinConfig);
-#ifndef DUAL_CORE
- /* Configure the Wakeup Pin EXTI Line */
- MODIFY_REG (EXTI->IMR2, PWR_EXTI_WAKEUP_PINS_MASK, (sPinParams->WakeUpPin << EXTI_IMR2_IM55_Pos));
-#endif /* !DUAL_CORE */
-}
-
-/**
- * @brief Disable the Wake-up PINx functionality.
- * @param WakeUpPin : Specifies the Wake-Up pin to be disabled.
- * This parameter can be one of the following values:
- * @arg PWR_WAKEUP_PIN1 : Disable PA0 wake-up PIN.
- * @arg PWR_WAKEUP_PIN2 : Disable PA2 wake-up PIN.
- * @arg PWR_WAKEUP_PIN3 : Disable PI8 wake-up PIN.
- * @arg PWR_WAKEUP_PIN4 : Disable PC13 wake-up PIN.
- * @arg PWR_WAKEUP_PIN5 : Disable PI11 wake-up PIN.
- * @arg PWR_WAKEUP_PIN6 : Disable PC1 wake-up PIN.
- * @retval None
- */
-void HAL_PWREx_DisableWakeUpPin (uint32_t WakeUpPin)
-{
- /* Check the parameter */
- assert_param (IS_PWR_WAKEUP_PIN (WakeUpPin));
-
- /* Disable the WakeUpPin */
- CLEAR_BIT (PWR->WKUPEPR, WakeUpPin);
-}
-
-/**
- * @brief Get the Wake-Up Pin pending flags.
- * @param WakeUpFlag : Specifies the Wake-Up PIN flag to be checked.
- * This parameter can be one of the following values:
- * @arg PWR_WAKEUP_FLAG1 : Get wakeup event received from PA0.
- * @arg PWR_WAKEUP_FLAG2 : Get wakeup event received from PA2.
- * @arg PWR_WAKEUP_FLAG3 : Get wakeup event received from PI8.
- * @arg PWR_WAKEUP_FLAG4 : Get wakeup event received from PC13.
- * @arg PWR_WAKEUP_FLAG5 : Get wakeup event received from PI11.
- * @arg PWR_WAKEUP_FLAG6 : Get wakeup event received from PC1.
- * @arg PWR_WAKEUP_FLAG_ALL : Get Wakeup event received from all
- * wake up pins.
- * @retval The Wake-Up pin flag.
- */
-uint32_t HAL_PWREx_GetWakeupFlag (uint32_t WakeUpFlag)
-{
- /* Check the parameters */
- assert_param (IS_PWR_WAKEUP_FLAG (WakeUpFlag));
-
- /* Return the wake up pin flag */
- return (PWR->WKUPFR & WakeUpFlag);
-}
-
-/**
- * @brief Clear the Wake-Up pin pending flag.
- * @param WakeUpFlag: Specifies the Wake-Up PIN flag to clear.
- * This parameter can be one of the following values:
- * @arg PWR_WAKEUP_FLAG1 : Clear the wakeup event received from PA0.
- * @arg PWR_WAKEUP_FLAG2 : Clear the wakeup event received from PA2.
- * @arg PWR_WAKEUP_FLAG3 : Clear the wakeup event received from PI8.
- * @arg PWR_WAKEUP_FLAG4 : Clear the wakeup event received from PC13.
- * @arg PWR_WAKEUP_FLAG5 : Clear the wakeup event received from PI11.
- * @arg PWR_WAKEUP_FLAG6 : Clear the wakeup event received from PC1.
- * @arg PWR_WAKEUP_FLAG_ALL : Clear the wakeup events received from
- * all wake up pins.
- * @retval HAL status.
- */
-HAL_StatusTypeDef HAL_PWREx_ClearWakeupFlag (uint32_t WakeUpFlag)
-{
- /* Check the parameter */
- assert_param (IS_PWR_WAKEUP_FLAG (WakeUpFlag));
-
- /* Clear the wake up event received from wake up pin x */
- SET_BIT (PWR->WKUPCR, WakeUpFlag);
-
- /* Check if the wake up event is well cleared */
- if ((PWR->WKUPFR & WakeUpFlag) != 0U)
- {
- return HAL_ERROR;
- }
-
- return HAL_OK;
-}
-
-/**
- * @brief This function handles the PWR WAKEUP PIN interrupt request.
- * @note This API should be called under the WAKEUP_PIN_IRQHandler().
- * @retval None.
- */
-void HAL_PWREx_WAKEUP_PIN_IRQHandler (void)
-{
- /* Wakeup pin EXTI line interrupt detected */
- if (READ_BIT(PWR->WKUPFR, PWR_WKUPFR_WKUPF1) != 0U)
- {
- /* Clear PWR WKUPF1 flag */
- __HAL_PWR_CLEAR_WAKEUPFLAG (PWR_FLAG_WKUP1);
-
- /* PWR WKUP1 interrupt user callback */
- HAL_PWREx_WKUP1_Callback ();
- }
- else if (READ_BIT (PWR->WKUPFR, PWR_WKUPFR_WKUPF2) != 0U)
- {
- /* Clear PWR WKUPF2 flag */
- __HAL_PWR_CLEAR_WAKEUPFLAG (PWR_FLAG_WKUP2);
-
- /* PWR WKUP2 interrupt user callback */
- HAL_PWREx_WKUP2_Callback ();
- }
- else if (READ_BIT (PWR->WKUPFR, PWR_WKUPFR_WKUPF3) != 0U)
- {
- /* Clear PWR WKUPF3 flag */
- __HAL_PWR_CLEAR_WAKEUPFLAG (PWR_FLAG_WKUP3);
-
- /* PWR WKUP3 interrupt user callback */
- HAL_PWREx_WKUP3_Callback ();
- }
- else if (READ_BIT (PWR->WKUPFR, PWR_WKUPFR_WKUPF4) != 0U)
- {
- /* Clear PWR WKUPF4 flag */
- __HAL_PWR_CLEAR_WAKEUPFLAG (PWR_FLAG_WKUP4);
-
- /* PWR WKUP4 interrupt user callback */
- HAL_PWREx_WKUP4_Callback ();
- }
- else if (READ_BIT (PWR->WKUPFR, PWR_WKUPFR_WKUPF5) != 0U)
- {
- /* Clear PWR WKUPF5 flag */
- __HAL_PWR_CLEAR_WAKEUPFLAG (PWR_FLAG_WKUP5);
-
- /* PWR WKUP5 interrupt user callback */
- HAL_PWREx_WKUP5_Callback ();
- }
- else
- {
- /* Clear PWR WKUPF6 flag */
- __HAL_PWR_CLEAR_WAKEUPFLAG (PWR_FLAG_WKUP6);
-
- /* PWR WKUP6 interrupt user callback */
- HAL_PWREx_WKUP6_Callback ();
- }
-}
-
-/**
- * @brief PWR WKUP1 interrupt callback.
- * @retval None.
- */
-__weak void HAL_PWREx_WKUP1_Callback (void)
-{
- /* NOTE : This function should not be modified, when the callback is needed,
- the HAL_PWREx_WKUP1Callback can be implemented in the user file
- */
-}
-
-/**
- * @brief PWR WKUP2 interrupt callback.
- * @retval None.
- */
-__weak void HAL_PWREx_WKUP2_Callback (void)
-{
- /* NOTE : This function should not be modified, when the callback is needed,
- the HAL_PWREx_WKUP2Callback can be implemented in the user file
- */
-}
-
-/**
- * @brief PWR WKUP3 interrupt callback.
- * @retval None.
- */
-__weak void HAL_PWREx_WKUP3_Callback (void)
-{
- /* NOTE : This function should not be modified, when the callback is needed,
- the HAL_PWREx_WKUP3Callback can be implemented in the user file
- */
-}
-
-/**
- * @brief PWR WKUP4 interrupt callback.
- * @retval None.
- */
-__weak void HAL_PWREx_WKUP4_Callback (void)
-{
- /* NOTE : This function should not be modified, when the callback is needed,
- the HAL_PWREx_WKUP4Callback can be implemented in the user file
- */
-}
-
-/**
- * @brief PWR WKUP5 interrupt callback.
- * @retval None.
- */
-__weak void HAL_PWREx_WKUP5_Callback (void)
-{
- /* NOTE : This function should not be modified, when the callback is needed,
- the HAL_PWREx_WKUP5Callback can be implemented in the user file
- */
-}
-
-/**
- * @brief PWR WKUP6 interrupt callback.
- * @retval None.
- */
-__weak void HAL_PWREx_WKUP6_Callback (void)
-{
- /* NOTE : This function should not be modified, when the callback is needed,
- the HAL_PWREx_WKUP6Callback can be implemented in the user file
- */
-}
-/**
- * @}
- */
-
-/** @defgroup PWREx_Exported_Functions_Group3 Peripherals control functions
+ * @brief Low power control functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Low power control functions #####
+ ===============================================================================
+
+ *** Domains Low Power modes configuration ***
+ =============================================
+ [..]
+ This section provides the extended low power mode control APIs.
+ The system presents 3 principles domains (D1, D2 and D3) that can be
+ operated in low-power modes (DSTOP or DSTANDBY mode):
+
+ (+) DSTOP mode to enters a domain to STOP mode:
+ (++) D1 domain and/or D2 domain enters DSTOP mode only when the CPU
+ subsystem is in CSTOP mode and has allocated peripheral in the
+ domain.
+ In DSTOP mode the domain bus matrix clock is stopped.
+ (++) The system enters STOP mode using one of the following scenarios:
+ (+++) D1 domain enters DSTANDBY mode (powered off) and D2, D3 domains
+ enter DSTOP mode.
+ (+++) D2 domain enters DSTANDBY mode (powered off) and D1, D3 domains
+ enter DSTOP mode.
+ (+++) D3 domain enters DSTANDBY mode (powered off) and D1, D2 domains
+ enter DSTOP mode.
+ (+++) D1 and D2 domains enter DSTANDBY mode (powered off) and D3 domain
+ enters DSTOP mode.
+ (+++) D1 and D3 domains enter DSTANDBY mode (powered off) and D2 domain
+ enters DSTOP mode.
+ (+++) D2 and D3 domains enter DSTANDBY mode (powered off) and D1 domain
+ enters DSTOP mode.
+ (+++) D1, D2 and D3 domains enter DSTOP mode.
+ (++) When the system enters STOP mode, the clocks are stopped and the
+ regulator is running in main or low power mode.
+ (++) D3 domain can be kept in Run mode regardless of the CPU status when
+ enter STOP mode by using HAL_PWREx_ConfigD3Domain(D3State) function.
+
+ (+) DSTANDBY mode to enters a domain to STANDBY mode:
+ (++) The DSTANDBY mode is entered when the PDDS_Dn bit in PWR CPU control
+ register (PWR_CPUCR) for the Dn domain selects Standby mode.
+ (++) The system enters STANDBY mode only when D1, D2 and D3 domains enter
+ DSTANDBY mode. Consequently the VCORE supply regulator is powered
+ off.
+
+ *** DSTOP mode ***
+ ==================
+ [..]
+ In DStop mode the domain bus matrix clock is stopped.
+ The Flash memory can enter low-power Stop mode when it is enabled through
+ FLPS in PWR_CR1 register. This allows a trade-off between domain DStop
+ restart time and low power consumption.
+ [..]
+ In DStop mode domain peripherals using the LSI or LSE clock and
+ peripherals having a kernel clock request are still able to operate.
+ [..]
+ Before entering DSTOP mode it is recommended to call SCB_CleanDCache
+ function in order to clean the D-Cache and guarantee the data integrity
+ for the SRAM memories.
+
+ (+) Entry:
+ The DSTOP mode is entered using the HAL_PWREx_EnterSTOPMode(Regulator,
+ STOPEntry, Domain) function with:
+ (++) Regulator:
+ (+++) PWR_MAINREGULATOR_ON : Main regulator ON.
+ (+++) PWR_LOWPOWERREGULATOR_ON : Low Power regulator ON.
+ (++) STOPEntry:
+ (+++) PWR_STOPENTRY_WFI : enter STOP mode with WFI instruction
+ (+++) PWR_STOPENTRY_WFE : enter STOP mode with WFE instruction
+ (++) Domain:
+ (+++) PWR_D1_DOMAIN : Enters D1/CD domain to DSTOP mode.
+ (+++) PWR_D2_DOMAIN : Enters D2 domain to DSTOP mode.
+ (+++) PWR_D3_DOMAIN : Enters D3/SRD domain to DSTOP mode.
+
+ (+) Exit:
+ Any EXTI Line (Internal or External) configured in Interrupt/Event mode.
+
+ *** DSTANDBY mode ***
+ =====================
+ [..]
+ In DStandby mode:
+ (+) The domain bus matrix clock is stopped.
+ (+) The domain is powered down and the domain RAM and register contents
+ are lost.
+ [..]
+ Before entering DSTANDBY mode it is recommended to call SCB_CleanDCache
+ function in order to clean the D-Cache and guarantee the data integrity
+ for the SRAM memories.
+
+ (+) Entry:
+ The DSTANDBY mode is entered using the HAL_PWREx_EnterSTANDBYMode
+ (Domain) function with:
+ (++) Domain:
+ (+++) PWR_D1_DOMAIN : Enters D1/CD domain to DSTANDBY mode.
+ (+++) PWR_D2_DOMAIN : Enters D2 domain to DSTANDBY mode.
+ (+++) PWR_D3_DOMAIN : Enters D3/SRD domain to DSTANDBY mode.
+
+ (+) Exit:
+ WKUP pin rising or falling edge, RTC alarm (Alarm A and Alarm B), RTC
+ wakeup, tamper event, time stamp event, external reset in NRST pin,
+ IWDG reset.
+
+ *** Keep D3/SRD in RUN mode ***
+ ===============================
+ [..]
+ D3/SRD domain can be kept in Run mode regardless of the CPU status when
+ entering STOP mode by using HAL_PWREx_ConfigD3Domain(D3State) function
+ with :
+ (+) D3State:
+ (++) PWR_D3_DOMAIN_STOP : D3/SDR domain follows the CPU sub-system
+ mode.
+ (++) PWR_D3_DOMAIN_RUN : D3/SRD domain remains in Run mode regardless
+ of CPU subsystem mode.
+
+ *** FLASH Power Down configuration ****
+ =======================================
+ [..]
+ By setting the FLPS bit in the PWR_CR1 register using the
+ HAL_PWREx_EnableFlashPowerDown() function, the Flash memory also enters
+ power down mode when the device enters STOP mode. When the Flash memory is
+ in power down mode, an additional startup delay is incurred when waking up
+ from STOP mode.
+
+ *** Wakeup Pins configuration ****
+ ===================================
+ [..]
+ Wakeup pins allow the system to exit from Standby mode. The configuration
+ of wakeup pins is done with the HAL_PWREx_EnableWakeUpPin(sPinParams)
+ function with:
+ (+) sPinParams: structure to enable and configure a wakeup pin:
+ (++) WakeUpPin: Wakeup pin to be enabled.
+ (++) PinPolarity: Wakeup pin polarity (rising or falling edge).
+ (++) PinPull: Wakeup pin pull (no pull, pull-up or pull-down).
+ [..]
+ The wakeup pins are internally connected to the EXTI lines [55-60] to
+ generate an interrupt if enabled. The EXTI lines configuration is done by
+ the HAL_EXTI_Dx_EventInputConfig() functions defined in the stm32h7xxhal.c
+ file.
+ [..]
+ When a wakeup pin event is received the HAL_PWREx_WAKEUP_PIN_IRQHandler is
+ called and the appropriate flag is set in the PWR_WKUPFR register. Then in
+ the HAL_PWREx_WAKEUP_PIN_IRQHandler function the wakeup pin flag will be
+ cleared and the appropriate user callback will be called. The user can add
+ his own code by customization of function pointer HAL_PWREx_WKUPx_Callback.
+
+@endverbatim
+ * @{
+ */
+
+#if defined (PWR_CPUCR_RETDS_CD)
+/**
+ * @brief Enter the system to STOP mode with main domain in DSTOP2.
+ * @note In STOP mode, the domain bus matrix clock is stalled.
+ * @note In STOP mode, memories and registers are maintained and peripherals
+ * in CPU domain are no longer operational.
+ * @note All clocks in the VCORE domain are stopped, the PLL, the HSI and the
+ * HSE oscillators are disabled. Only Peripherals that have wakeup
+ * capability can switch on the HSI to receive a frame, and switch off
+ * the HSI after receiving the frame if it is not a wakeup frame. In
+ * this case the HSI clock is propagated only to the peripheral
+ * requesting it.
+ * @note When exiting STOP mode by issuing an interrupt or a wakeup event,
+ * the HSI RC oscillator is selected as system clock if STOPWUCK bit in
+ * RCC_CFGR register is set.
+ * @param Regulator : Specifies the regulator state in STOP mode.
+ * This parameter can be one of the following values:
+ * @arg PWR_MAINREGULATOR_ON : STOP mode with regulator ON.
+ * @arg PWR_LOWPOWERREGULATOR_ON : STOP mode with low power
+ * regulator ON.
+ * @param STOPEntry : Specifies if STOP mode in entered with WFI or WFE
+ * intrinsic instruction.
+ * This parameter can be one of the following values:
+ * @arg PWR_STOPENTRY_WFI : Enter STOP mode with WFI instruction.
+ * @arg PWR_STOPENTRY_WFE : Enter STOP mode with WFE instruction.
+ * @retval None.
+ */
+void HAL_PWREx_EnterSTOP2Mode (uint32_t Regulator, uint8_t STOPEntry)
+{
+ /* Check the parameters */
+ assert_param (IS_PWR_REGULATOR (Regulator));
+ assert_param (IS_PWR_STOP_ENTRY (STOPEntry));
+
+ /* Select the regulator state in Stop mode */
+ MODIFY_REG (PWR->CR1, PWR_CR1_LPDS, Regulator);
+
+ /* Go to DStop2 mode (deep retention) when CPU domain enters Deepsleep */
+ SET_BIT (PWR->CPUCR, PWR_CPUCR_RETDS_CD);
+
+ /* Keep DSTOP mode when SmartRun domain enters Deepsleep */
+ CLEAR_BIT (PWR->CPUCR, PWR_CPUCR_PDDS_SRD);
+
+ /* Set SLEEPDEEP bit of Cortex System Control Register */
+ SET_BIT (SCB->SCR, SCB_SCR_SLEEPDEEP_Msk);
+
+ /* Ensure that all instructions are done before entering STOP mode */
+ __ISB ();
+ __DSB ();
+
+ /* Select Stop mode entry */
+ if (STOPEntry == PWR_STOPENTRY_WFI)
+ {
+ /* Request Wait For Interrupt */
+ __WFI ();
+ }
+ else
+ {
+ /* Request Wait For Event */
+ __WFE ();
+ }
+
+ /* Clear SLEEPDEEP bit of Cortex-Mx in the System Control Register */
+ CLEAR_BIT (SCB->SCR, SCB_SCR_SLEEPDEEP_Msk);
+}
+#endif /* defined (PWR_CPUCR_RETDS_CD) */
+
+/**
+ * @brief Enter a Domain to DSTOP mode.
+ * @note This API gives flexibility to manage independently each domain STOP
+ * mode. For dual core lines, this API should be executed with the
+ * corresponding Cortex-Mx to enter domain to DSTOP mode. When it is
+ * executed by all available Cortex-Mx, the system enter to STOP mode.
+ * For single core lines, calling this API with domain parameter set to
+ * PWR_D1_DOMAIN (D1/CD), the whole system will enter in STOP mode
+ * independently of PWR_CPUCR_PDDS_Dx bits values if RUN_D3 bit in the
+ * CPUCR_RUN_D3 is cleared.
+ * @note In DStop mode the domain bus matrix clock is stopped.
+ * @note The system D3/SRD domain enter Stop mode only when the CPU subsystem
+ * is in CStop mode, the EXTI wakeup sources are inactive and at least
+ * one PDDS_Dn bit in PWR CPU control register (PWR_CPUCR) for
+ * any domain request Stop.
+ * @note Before entering DSTOP mode it is recommended to call SCB_CleanDCache
+ * function in order to clean the D-Cache and guarantee the data
+ * integrity for the SRAM memories.
+ * @note In System Stop mode, the domain peripherals that use the LSI or LSE
+ * clock, and the peripherals that have a kernel clock request to
+ * select HSI or CSI as source, are still able to operate.
+ * @param Regulator : Specifies the regulator state in STOP mode.
+ * This parameter can be one of the following values:
+ * @arg PWR_MAINREGULATOR_ON : STOP mode with regulator ON.
+ * @arg PWR_LOWPOWERREGULATOR_ON : STOP mode with low power
+ * regulator ON.
+ * @param STOPEntry : Specifies if STOP mode in entered with WFI or WFE
+ * intrinsic instruction.
+ * This parameter can be one of the following values:
+ * @arg PWR_STOPENTRY_WFI : Enter STOP mode with WFI instruction.
+ * @arg PWR_STOPENTRY_WFE : Enter STOP mode with WFE instruction.
+ * @param Domain : Specifies the Domain to enter in DSTOP mode.
+ * This parameter can be one of the following values:
+ * @arg PWR_D1_DOMAIN : Enter D1/CD Domain to DSTOP mode.
+ * @arg PWR_D2_DOMAIN : Enter D2 Domain to DSTOP mode.
+ * @arg PWR_D3_DOMAIN : Enter D3/SRD Domain to DSTOP mode.
+ * @retval None.
+ */
+void HAL_PWREx_EnterSTOPMode (uint32_t Regulator, uint8_t STOPEntry, uint32_t Domain)
+{
+ /* Check the parameters */
+ assert_param (IS_PWR_REGULATOR (Regulator));
+ assert_param (IS_PWR_STOP_ENTRY (STOPEntry));
+ assert_param (IS_PWR_DOMAIN (Domain));
+
+ /* Select the regulator state in Stop mode */
+ MODIFY_REG (PWR->CR1, PWR_CR1_LPDS, Regulator);
+
+ /* Select the domain Power Down DeepSleep */
+ if (Domain == PWR_D1_DOMAIN)
+ {
+#if defined (DUAL_CORE)
+ /* Check current core */
+ if (HAL_GetCurrentCPUID () != CM7_CPUID)
+ {
+ /*
+ When the domain selected and the cortex-mx don't match, entering stop
+ mode will not be performed
+ */
+ return;
+ }
+#endif /* defined (DUAL_CORE) */
+
+ /* Keep DSTOP mode when D1/CD domain enters Deepsleep */
+ CLEAR_BIT (PWR->CPUCR, PWR_CPUCR_PDDS_D1);
+
+ /* Set SLEEPDEEP bit of Cortex System Control Register */
+ SET_BIT (SCB->SCR, SCB_SCR_SLEEPDEEP_Msk);
+
+ /* Ensure that all instructions are done before entering STOP mode */
+ __DSB ();
+ __ISB ();
+
+ /* Select Stop mode entry */
+ if (STOPEntry == PWR_STOPENTRY_WFI)
+ {
+ /* Request Wait For Interrupt */
+ __WFI ();
+ }
+ else
+ {
+ /* Request Wait For Event */
+ __WFE ();
+ }
+
+ /* Clear SLEEPDEEP bit of Cortex-Mx in the System Control Register */
+ CLEAR_BIT (SCB->SCR, SCB_SCR_SLEEPDEEP_Msk);
+ }
+#if defined (PWR_CPUCR_PDDS_D2)
+ else if (Domain == PWR_D2_DOMAIN)
+ {
+#if defined (DUAL_CORE)
+ /* Check current core */
+ if (HAL_GetCurrentCPUID () != CM4_CPUID)
+ {
+ /*
+ When the domain selected and the cortex-mx don't match, entering stop
+ mode will not be performed
+ */
+ return;
+ }
+
+ /* Keep DSTOP mode when D2 domain enters Deepsleep */
+ CLEAR_BIT (PWR->CPU2CR, PWR_CPU2CR_PDDS_D2);
+
+ /* Set SLEEPDEEP bit of Cortex System Control Register */
+ SET_BIT (SCB->SCR, SCB_SCR_SLEEPDEEP_Msk);
+
+ /* Ensure that all instructions are done before entering STOP mode */
+ __DSB ();
+ __ISB ();
+
+ /* Select Stop mode entry */
+ if (STOPEntry == PWR_STOPENTRY_WFI)
+ {
+ /* Request Wait For Interrupt */
+ __WFI ();
+ }
+ else
+ {
+ /* Request Wait For Event */
+ __WFE ();
+ }
+
+ /* Clear SLEEPDEEP bit of Cortex-Mx in the System Control Register */
+ CLEAR_BIT (SCB->SCR, SCB_SCR_SLEEPDEEP_Msk);
+#else
+ /* Keep DSTOP mode when D2 domain enters Deepsleep */
+ CLEAR_BIT (PWR->CPUCR, PWR_CPUCR_PDDS_D2);
+#endif /* defined (DUAL_CORE) */
+ }
+#endif /* defined (PWR_CPUCR_PDDS_D2) */
+ else
+ {
+#if defined (DUAL_CORE)
+ /* Check current core */
+ if (HAL_GetCurrentCPUID () == CM7_CPUID)
+ {
+ /* Keep DSTOP mode when D3 domain enters Deepsleep */
+ CLEAR_BIT (PWR->CPUCR, PWR_CPUCR_PDDS_D3);
+ }
+ else
+ {
+ /* Keep DSTOP mode when D3 domain enters Deepsleep */
+ CLEAR_BIT (PWR->CPU2CR, PWR_CPU2CR_PDDS_D3);
+ }
+#else
+ /* Keep DSTOP mode when D3/SRD domain enters Deepsleep */
+ CLEAR_BIT (PWR->CPUCR, PWR_CPUCR_PDDS_D3);
+#endif /* defined (DUAL_CORE) */
+ }
+}
+
+/**
+ * @brief Clear pending event.
+ * @note This API clears the pending event in order to enter a given CPU
+ * to CSLEEP or CSTOP. It should be called just before APIs performing
+ * enter low power mode using Wait For Event request.
+ * @note Cortex-M7 must be in CRUN mode when calling this API by Cortex-M4.
+ * @retval None.
+ */
+void HAL_PWREx_ClearPendingEvent (void)
+{
+#if defined (DUAL_CORE)
+ /* Check the current Core */
+ if (HAL_GetCurrentCPUID () == CM7_CPUID)
+ {
+ __WFE ();
+ }
+ else
+ {
+ __SEV ();
+ __WFE ();
+ }
+#else
+ __WFE ();
+#endif /* defined (DUAL_CORE) */
+}
+
+/**
+ * @brief Enter a Domain to DSTANDBY mode.
+ * @note This API gives flexibility to manage independently each domain
+ * STANDBY mode. For dual core lines, this API should be executed with
+ * the corresponding Cortex-Mx to enter domain to DSTANDBY mode. When
+ * it is executed by all available Cortex-Mx, the system enter STANDBY
+ * mode.
+ * For single core lines, calling this API with D1/SRD the selected
+ * domain will enter the whole system in STOP if PWR_CPUCR_PDDS_D3 = 0
+ * and enter the whole system in STANDBY if PWR_CPUCR_PDDS_D3 = 1.
+ * @note The DStandby mode is entered when all PDDS_Dn bits in PWR_CPUCR for
+ * the Dn domain select Standby mode. When the system enters Standby
+ * mode, the voltage regulator is disabled.
+ * @note When D2 or D3 domain is in DStandby mode and the CPU sets the
+ * domain PDDS_Dn bit to select Stop mode, the domain remains in
+ * DStandby mode. The domain will only exit DStandby when the CPU
+ * allocates a peripheral in the domain.
+ * @note The system D3/SRD domain enters Standby mode only when the D1 and D2
+ * domain are in DStandby.
+ * @note Before entering DSTANDBY mode it is recommended to call
+ * SCB_CleanDCache function in order to clean the D-Cache and guarantee
+ * the data integrity for the SRAM memories.
+ * @param Domain : Specifies the Domain to enter to STANDBY mode.
+ * This parameter can be one of the following values:
+ * @arg PWR_D1_DOMAIN: Enter D1/CD Domain to DSTANDBY mode.
+ * @arg PWR_D2_DOMAIN: Enter D2 Domain to DSTANDBY mode.
+ * @arg PWR_D3_DOMAIN: Enter D3/SRD Domain to DSTANDBY mode.
+ * @retval None
+ */
+void HAL_PWREx_EnterSTANDBYMode (uint32_t Domain)
+{
+ /* Check the parameters */
+ assert_param (IS_PWR_DOMAIN (Domain));
+
+ /* Select the domain Power Down DeepSleep */
+ if (Domain == PWR_D1_DOMAIN)
+ {
+#if defined (DUAL_CORE)
+ /* Check current core */
+ if (HAL_GetCurrentCPUID () != CM7_CPUID)
+ {
+ /*
+ When the domain selected and the cortex-mx don't match, entering
+ standby mode will not be performed
+ */
+ return;
+ }
+#endif /* defined (DUAL_CORE) */
+
+ /* Allow DSTANDBY mode when D1/CD domain enters Deepsleep */
+ SET_BIT (PWR-> CPUCR, PWR_CPUCR_PDDS_D1);
+
+#if defined (DUAL_CORE)
+ /* Allow DSTANDBY mode when D1/CD domain enters Deepsleep */
+ SET_BIT (PWR-> CPU2CR, PWR_CPU2CR_PDDS_D1);
+#endif /*DUAL_CORE*/
+
+ /* Set SLEEPDEEP bit of Cortex System Control Register */
+ SET_BIT (SCB->SCR, SCB_SCR_SLEEPDEEP_Msk);
+
+ /* This option is used to ensure that store operations are completed */
+#if defined (__CC_ARM)
+ __force_stores ();
+#endif /* defined (__CC_ARM) */
+
+ /* Request Wait For Interrupt */
+ __WFI ();
+ }
+#if defined (PWR_CPUCR_PDDS_D2)
+ else if (Domain == PWR_D2_DOMAIN)
+ {
+ /* Allow DSTANDBY mode when D2 domain enters Deepsleep */
+ SET_BIT (PWR-> CPUCR, PWR_CPUCR_PDDS_D2);
+
+#if defined (DUAL_CORE)
+ /* Check current core */
+ if (HAL_GetCurrentCPUID () != CM4_CPUID)
+ {
+ /*
+ When the domain selected and the cortex-mx don't match, entering
+ standby mode will not be performed
+ */
+ return;
+ }
+
+ /* Allow DSTANDBY mode when D2 domain enters Deepsleep */
+ SET_BIT (PWR-> CPU2CR, PWR_CPU2CR_PDDS_D2);
+
+ /* Set SLEEPDEEP bit of Cortex System Control Register */
+ SET_BIT (SCB->SCR, SCB_SCR_SLEEPDEEP_Msk);
+
+ /* This option is used to ensure that store operations are completed */
+#if defined (__CC_ARM)
+ __force_stores ();
+#endif /* defined (__CC_ARM) */
+
+ /* Request Wait For Interrupt */
+ __WFI ();
+#endif /* defined (DUAL_CORE) */
+ }
+#endif /* defined (PWR_CPUCR_PDDS_D2) */
+ else
+ {
+ /* Allow DSTANDBY mode when D3/SRD domain enters Deepsleep */
+ SET_BIT (PWR->CPUCR, PWR_CPUCR_PDDS_D3);
+
+#if defined (DUAL_CORE)
+ /* Allow DSTANDBY mode when D3/SRD domain enters Deepsleep */
+ SET_BIT (PWR->CPU2CR, PWR_CPU2CR_PDDS_D3);
+#endif /* defined (DUAL_CORE) */
+ }
+}
+
+/**
+ * @brief Configure the D3/SRD Domain state when the System in low power mode.
+ * @param D3State : Specifies the D3/SRD state.
+ * This parameter can be one of the following values :
+ * @arg PWR_D3_DOMAIN_STOP : D3/SRD domain will follow the most deep
+ * CPU sub-system low power mode.
+ * @arg PWR_D3_DOMAIN_RUN : D3/SRD domain will stay in RUN mode
+ * regardless of the CPU sub-system low
+ * power mode.
+ * @retval None
+ */
+void HAL_PWREx_ConfigD3Domain (uint32_t D3State)
+{
+ /* Check the parameter */
+ assert_param (IS_D3_STATE (D3State));
+
+ /* Keep D3/SRD in run mode */
+ MODIFY_REG (PWR->CPUCR, PWR_CPUCR_RUN_D3, D3State);
+}
+
+#if defined (DUAL_CORE)
+/**
+ * @brief Clear HOLD2F, HOLD1F, STOPF, SBF, SBF_D1, and SBF_D2 flags for a
+ * given domain.
+ * @param DomainFlags : Specifies the Domain flags to be cleared.
+ * This parameter can be one of the following values:
+ * @arg PWR_D1_DOMAIN_FLAGS : Clear D1 Domain flags.
+ * @arg PWR_D2_DOMAIN_FLAGS : Clear D2 Domain flags.
+ * @arg PWR_ALL_DOMAIN_FLAGS : Clear D1 and D2 Domain flags.
+ * @retval None.
+ */
+void HAL_PWREx_ClearDomainFlags (uint32_t DomainFlags)
+{
+ /* Check the parameter */
+ assert_param (IS_PWR_DOMAIN_FLAG (DomainFlags));
+
+ /* D1 CPU flags */
+ if (DomainFlags == PWR_D1_DOMAIN_FLAGS)
+ {
+ /* Clear D1 domain flags (HOLD2F, STOPF, SBF, SBF_D1, and SBF_D2) */
+ SET_BIT (PWR->CPUCR, PWR_CPUCR_CSSF);
+ }
+ /* D2 CPU flags */
+ else if (DomainFlags == PWR_D2_DOMAIN_FLAGS)
+ {
+ /* Clear D2 domain flags (HOLD1F, STOPF, SBF, SBF_D1, and SBF_D2) */
+ SET_BIT (PWR->CPU2CR, PWR_CPU2CR_CSSF);
+ }
+ else
+ {
+ /* Clear D1 domain flags (HOLD2F, STOPF, SBF, SBF_D1, and SBF_D2) */
+ SET_BIT (PWR->CPUCR, PWR_CPUCR_CSSF);
+ /* Clear D2 domain flags (HOLD1F, STOPF, SBF, SBF_D1, and SBF_D2) */
+ SET_BIT (PWR->CPU2CR, PWR_CPU2CR_CSSF);
+ }
+}
+
+/**
+ * @brief Hold the CPU and their domain peripherals when exiting STOP mode.
+ * @param CPU : Specifies the core to be held.
+ * This parameter can be one of the following values:
+ * @arg PWR_CORE_CPU1: Hold CPU1 and set CPU2 as master.
+ * @arg PWR_CORE_CPU2: Hold CPU2 and set CPU1 as master.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PWREx_HoldCore (uint32_t CPU)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check the parameters */
+ assert_param (IS_PWR_CORE (CPU));
+
+ /* Check CPU index */
+ if (CPU == PWR_CORE_CPU2)
+ {
+ /* If CPU1 is not held */
+ if ((PWR->CPU2CR & PWR_CPU2CR_HOLD1) != PWR_CPU2CR_HOLD1)
+ {
+ /* Set HOLD2 bit */
+ SET_BIT (PWR->CPUCR, PWR_CPUCR_HOLD2);
+ }
+ else
+ {
+ status = HAL_ERROR;
+ }
+ }
+ else
+ {
+ /* If CPU2 is not held */
+ if ((PWR->CPUCR & PWR_CPUCR_HOLD2) != PWR_CPUCR_HOLD2)
+ {
+ /* Set HOLD1 bit */
+ SET_BIT (PWR->CPU2CR, PWR_CPU2CR_HOLD1);
+ }
+ else
+ {
+ status = HAL_ERROR;
+ }
+ }
+
+ return status;
+}
+
+/**
+ * @brief Release the CPU and their domain peripherals after a wake-up from
+ * STOP mode.
+ * @param CPU: Specifies the core to be released.
+ * This parameter can be one of the following values:
+ * @arg PWR_CORE_CPU1: Release the CPU1 and their domain
+ * peripherals from holding.
+ * @arg PWR_CORE_CPU2: Release the CPU2 and their domain
+ * peripherals from holding.
+ * @retval None
+ */
+void HAL_PWREx_ReleaseCore (uint32_t CPU)
+{
+ /* Check the parameters */
+ assert_param (IS_PWR_CORE (CPU));
+
+ /* Check CPU index */
+ if (CPU == PWR_CORE_CPU2)
+ {
+ /* Reset HOLD2 bit */
+ CLEAR_BIT (PWR->CPUCR, PWR_CPUCR_HOLD2);
+ }
+ else
+ {
+ /* Reset HOLD1 bit */
+ CLEAR_BIT (PWR->CPU2CR, PWR_CPU2CR_HOLD1);
+ }
+}
+#endif /* defined (DUAL_CORE) */
+
+
+/**
+ * @brief Enable the Flash Power Down in Stop mode.
+ * @note When Flash Power Down is enabled the Flash memory enters low-power
+ * mode when D1/SRD domain is in DStop mode. This feature allows to
+ * obtain the best trade-off between low-power consumption and restart
+ * time when exiting from DStop mode.
+ * @retval None.
+ */
+void HAL_PWREx_EnableFlashPowerDown (void)
+{
+ /* Enable the Flash Power Down */
+ SET_BIT (PWR->CR1, PWR_CR1_FLPS);
+}
+
+/**
+ * @brief Disable the Flash Power Down in Stop mode.
+ * @note When Flash Power Down is disabled the Flash memory is kept on
+ * normal mode when D1/SRD domain is in DStop mode. This feature allows
+ * to obtain the best trade-off between low-power consumption and
+ * restart time when exiting from DStop mode.
+ * @retval None.
+ */
+void HAL_PWREx_DisableFlashPowerDown (void)
+{
+ /* Disable the Flash Power Down */
+ CLEAR_BIT (PWR->CR1, PWR_CR1_FLPS);
+}
+
+#if defined (PWR_CR1_SRDRAMSO)
+/**
+ * @brief Enable memory block shut-off in DStop or DStop2 modes
+ * @note In DStop or DStop2 mode, the content of the memory blocks is
+ * maintained. Further power optimization can be obtained by switching
+ * off some memory blocks. This optimization implies loss of the memory
+ * content. The user can select which memory is discarded during STOP
+ * mode by means of xxSO bits.
+ * @param MemoryBlock : Specifies the memory block to shut-off during DStop or
+ * DStop2 mode.
+ * This parameter can be one of the following values:
+ * @arg PWR_SRD_AHB_MEMORY_BLOCK : SmartRun domain AHB memory.
+ * @arg PWR_USB_FDCAN_MEMORY_BLOCK : High-speed interfaces USB and
+ * FDCAN memories.
+ * @arg PWR_GFXMMU_JPEG_MEMORY_BLOCK : GFXMMU and JPEG memories.
+ * @arg PWR_TCM_ECM_MEMORY_BLOCK : Instruction TCM and ETM memories.
+ * @arg PWR_RAM1_AHB_MEMORY_BLOCK : AHB RAM1 memory.
+ * @arg PWR_RAM2_AHB_MEMORY_BLOCK : AHB RAM2 memory.
+ * @arg PWR_RAM1_AXI_MEMORY_BLOCK : AXI RAM1 memory.
+ * @arg PWR_RAM2_AXI_MEMORY_BLOCK : AXI RAM2 memory.
+ * @arg PWR_RAM3_AXI_MEMORY_BLOCK : AXI RAM3 memory.
+ * @retval None.
+ */
+void HAL_PWREx_EnableMemoryShutOff (uint32_t MemoryBlock)
+{
+ /* Check the parameter */
+ assert_param (IS_PWR_MEMORY_BLOCK (MemoryBlock));
+
+ /* Enable memory block shut-off */
+ SET_BIT (PWR->CR1, MemoryBlock);
+}
+
+/**
+ * @brief Disable memory block shut-off in DStop or DStop2 modes
+ * @param MemoryBlock : Specifies the memory block to keep content during
+ * DStop or DStop2 mode.
+ * This parameter can be one of the following values:
+ * @arg PWR_SRD_AHB_MEMORY_BLOCK : SmartRun domain AHB memory.
+ * @arg PWR_USB_FDCAN_MEMORY_BLOCK : High-speed interfaces USB and
+ * FDCAN memories.
+ * @arg PWR_GFXMMU_JPEG_MEMORY_BLOCK : GFXMMU and JPEG memories.
+ * @arg PWR_TCM_ECM_MEMORY_BLOCK : Instruction TCM and ETM memories.
+ * @arg PWR_RAM1_AHB_MEMORY_BLOCK : AHB RAM1 memory.
+ * @arg PWR_RAM2_AHB_MEMORY_BLOCK : AHB RAM2 memory.
+ * @arg PWR_RAM1_AXI_MEMORY_BLOCK : AXI RAM1 memory.
+ * @arg PWR_RAM2_AXI_MEMORY_BLOCK : AXI RAM2 memory.
+ * @arg PWR_RAM3_AXI_MEMORY_BLOCK : AXI RAM3 memory.
+ * @retval None.
+ */
+void HAL_PWREx_DisableMemoryShutOff (uint32_t MemoryBlock)
+{
+ /* Check the parameter */
+ assert_param (IS_PWR_MEMORY_BLOCK (MemoryBlock));
+
+ /* Disable memory block shut-off */
+ CLEAR_BIT (PWR->CR1, MemoryBlock);
+}
+#endif /* defined (PWR_CR1_SRDRAMSO) */
+
+/**
+ * @brief Enable the Wake-up PINx functionality.
+ * @param sPinParams : Pointer to a PWREx_WakeupPinTypeDef structure that
+ * contains the configuration information for the wake-up
+ * Pin.
+ * @note For dual core devices, please ensure to configure the EXTI lines for
+ * the different Cortex-Mx. All combination are allowed: wake up only
+ * Cortex-M7, wake up only Cortex-M4 and wake up Cortex-M7 and
+ * Cortex-M4.
+ * @retval None.
+ */
+void HAL_PWREx_EnableWakeUpPin (PWREx_WakeupPinTypeDef *sPinParams)
+{
+ uint32_t pinConfig;
+ uint32_t regMask;
+ const uint32_t pullMask = PWR_WKUPEPR_WKUPPUPD1;
+
+ /* Check the parameters */
+ assert_param (IS_PWR_WAKEUP_PIN (sPinParams->WakeUpPin));
+ assert_param (IS_PWR_WAKEUP_PIN_POLARITY (sPinParams->PinPolarity));
+ assert_param (IS_PWR_WAKEUP_PIN_PULL (sPinParams->PinPull));
+
+ pinConfig = sPinParams->WakeUpPin | \
+ (sPinParams->PinPolarity << ((POSITION_VAL(sPinParams->WakeUpPin) + PWR_WKUPEPR_WKUPP1_Pos) & 0x1FU)) | \
+ (sPinParams->PinPull << (((POSITION_VAL(sPinParams->WakeUpPin) * PWR_WAKEUP_PINS_PULL_SHIFT_OFFSET) + PWR_WKUPEPR_WKUPPUPD1_Pos) & 0x1FU));
+
+ regMask = sPinParams->WakeUpPin | \
+ (PWR_WKUPEPR_WKUPP1 << (POSITION_VAL(sPinParams->WakeUpPin) & 0x1FU)) | \
+ (pullMask << ((POSITION_VAL(sPinParams->WakeUpPin) * PWR_WAKEUP_PINS_PULL_SHIFT_OFFSET) & 0x1FU));
+
+ /* Enable and Specify the Wake-Up pin polarity and the pull configuration
+ for the event detection (rising or falling edge) */
+ MODIFY_REG (PWR->WKUPEPR, regMask, pinConfig);
+#ifndef DUAL_CORE
+ /* Configure the Wakeup Pin EXTI Line */
+ MODIFY_REG (EXTI->IMR2, PWR_EXTI_WAKEUP_PINS_MASK, (sPinParams->WakeUpPin << EXTI_IMR2_IM55_Pos));
+#endif /* !DUAL_CORE */
+}
+
+/**
+ * @brief Disable the Wake-up PINx functionality.
+ * @param WakeUpPin : Specifies the Wake-Up pin to be disabled.
+ * This parameter can be one of the following values:
+ * @arg PWR_WAKEUP_PIN1 : Disable PA0 wake-up PIN.
+ * @arg PWR_WAKEUP_PIN2 : Disable PA2 wake-up PIN.
+ * @arg PWR_WAKEUP_PIN3 : Disable PI8 wake-up PIN.
+ * @arg PWR_WAKEUP_PIN4 : Disable PC13 wake-up PIN.
+ * @arg PWR_WAKEUP_PIN5 : Disable PI11 wake-up PIN.
+ * @arg PWR_WAKEUP_PIN6 : Disable PC1 wake-up PIN.
+ * @note The PWR_WAKEUP_PIN3 and PWR_WAKEUP_PIN5 are available only for
+ * devices that support GPIOI port.
+ * @retval None
+ */
+void HAL_PWREx_DisableWakeUpPin (uint32_t WakeUpPin)
+{
+ /* Check the parameter */
+ assert_param (IS_PWR_WAKEUP_PIN (WakeUpPin));
+
+ /* Disable the WakeUpPin */
+ CLEAR_BIT (PWR->WKUPEPR, WakeUpPin);
+}
+
+/**
+ * @brief Get the Wake-Up Pin pending flags.
+ * @param WakeUpFlag : Specifies the Wake-Up PIN flag to be checked.
+ * This parameter can be one of the following values:
+ * @arg PWR_WAKEUP_FLAG1 : Get wakeup event received from PA0.
+ * @arg PWR_WAKEUP_FLAG2 : Get wakeup event received from PA2.
+ * @arg PWR_WAKEUP_FLAG3 : Get wakeup event received from PI8.
+ * @arg PWR_WAKEUP_FLAG4 : Get wakeup event received from PC13.
+ * @arg PWR_WAKEUP_FLAG5 : Get wakeup event received from PI11.
+ * @arg PWR_WAKEUP_FLAG6 : Get wakeup event received from PC1.
+ * @arg PWR_WAKEUP_FLAG_ALL : Get Wakeup event received from all
+ * wake up pins.
+ * @note The PWR_WAKEUP_FLAG3 and PWR_WAKEUP_FLAG5 are available only for
+ * devices that support GPIOI port.
+ * @retval The Wake-Up pin flag.
+ */
+uint32_t HAL_PWREx_GetWakeupFlag (uint32_t WakeUpFlag)
+{
+ /* Check the parameters */
+ assert_param (IS_PWR_WAKEUP_FLAG (WakeUpFlag));
+
+ /* Return the wake up pin flag */
+ return (PWR->WKUPFR & WakeUpFlag);
+}
+
+/**
+ * @brief Clear the Wake-Up pin pending flag.
+ * @param WakeUpFlag: Specifies the Wake-Up PIN flag to clear.
+ * This parameter can be one of the following values:
+ * @arg PWR_WAKEUP_FLAG1 : Clear the wakeup event received from PA0.
+ * @arg PWR_WAKEUP_FLAG2 : Clear the wakeup event received from PA2.
+ * @arg PWR_WAKEUP_FLAG3 : Clear the wakeup event received from PI8.
+ * @arg PWR_WAKEUP_FLAG4 : Clear the wakeup event received from PC13.
+ * @arg PWR_WAKEUP_FLAG5 : Clear the wakeup event received from PI11.
+ * @arg PWR_WAKEUP_FLAG6 : Clear the wakeup event received from PC1.
+ * @arg PWR_WAKEUP_FLAG_ALL : Clear the wakeup events received from
+ * all wake up pins.
+ * @note The PWR_WAKEUP_FLAG3 and PWR_WAKEUP_FLAG5 are available only for
+ * devices that support GPIOI port.
+ * @retval HAL status.
+ */
+HAL_StatusTypeDef HAL_PWREx_ClearWakeupFlag (uint32_t WakeUpFlag)
+{
+ /* Check the parameter */
+ assert_param (IS_PWR_WAKEUP_FLAG (WakeUpFlag));
+
+ /* Clear the wake up event received from wake up pin x */
+ SET_BIT (PWR->WKUPCR, WakeUpFlag);
+
+ /* Check if the wake up event is well cleared */
+ if ((PWR->WKUPFR & WakeUpFlag) != 0U)
+ {
+ return HAL_ERROR;
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief This function handles the PWR WAKEUP PIN interrupt request.
+ * @note This API should be called under the WAKEUP_PIN_IRQHandler().
+ * @retval None.
+ */
+void HAL_PWREx_WAKEUP_PIN_IRQHandler (void)
+{
+ /* Wakeup pin EXTI line interrupt detected */
+ if (READ_BIT(PWR->WKUPFR, PWR_WKUPFR_WKUPF1) != 0U)
+ {
+ /* Clear PWR WKUPF1 flag */
+ __HAL_PWR_CLEAR_WAKEUPFLAG (PWR_FLAG_WKUP1);
+
+ /* PWR WKUP1 interrupt user callback */
+ HAL_PWREx_WKUP1_Callback ();
+ }
+ else if (READ_BIT (PWR->WKUPFR, PWR_WKUPFR_WKUPF2) != 0U)
+ {
+ /* Clear PWR WKUPF2 flag */
+ __HAL_PWR_CLEAR_WAKEUPFLAG (PWR_FLAG_WKUP2);
+
+ /* PWR WKUP2 interrupt user callback */
+ HAL_PWREx_WKUP2_Callback ();
+ }
+#if defined (PWR_WKUPFR_WKUPF3)
+ else if (READ_BIT (PWR->WKUPFR, PWR_WKUPFR_WKUPF3) != 0U)
+ {
+ /* Clear PWR WKUPF3 flag */
+ __HAL_PWR_CLEAR_WAKEUPFLAG (PWR_FLAG_WKUP3);
+
+ /* PWR WKUP3 interrupt user callback */
+ HAL_PWREx_WKUP3_Callback ();
+ }
+#endif /* defined (PWR_WKUPFR_WKUPF3) */
+ else if (READ_BIT (PWR->WKUPFR, PWR_WKUPFR_WKUPF4) != 0U)
+ {
+ /* Clear PWR WKUPF4 flag */
+ __HAL_PWR_CLEAR_WAKEUPFLAG (PWR_FLAG_WKUP4);
+
+ /* PWR WKUP4 interrupt user callback */
+ HAL_PWREx_WKUP4_Callback ();
+ }
+#if defined (PWR_WKUPFR_WKUPF5)
+ else if (READ_BIT (PWR->WKUPFR, PWR_WKUPFR_WKUPF5) != 0U)
+ {
+ /* Clear PWR WKUPF5 flag */
+ __HAL_PWR_CLEAR_WAKEUPFLAG (PWR_FLAG_WKUP5);
+
+ /* PWR WKUP5 interrupt user callback */
+ HAL_PWREx_WKUP5_Callback ();
+ }
+#endif /* defined (PWR_WKUPFR_WKUPF5) */
+ else
+ {
+ /* Clear PWR WKUPF6 flag */
+ __HAL_PWR_CLEAR_WAKEUPFLAG (PWR_FLAG_WKUP6);
+
+ /* PWR WKUP6 interrupt user callback */
+ HAL_PWREx_WKUP6_Callback ();
+ }
+}
+
+/**
+ * @brief PWR WKUP1 interrupt callback.
+ * @retval None.
+ */
+__weak void HAL_PWREx_WKUP1_Callback (void)
+{
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_PWREx_WKUP1Callback can be implemented in the user file
+ */
+}
+
+/**
+ * @brief PWR WKUP2 interrupt callback.
+ * @retval None.
+ */
+__weak void HAL_PWREx_WKUP2_Callback (void)
+{
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_PWREx_WKUP2Callback can be implemented in the user file
+ */
+}
+
+#if defined (PWR_WKUPFR_WKUPF3)
+/**
+ * @brief PWR WKUP3 interrupt callback.
+ * @retval None.
+ */
+__weak void HAL_PWREx_WKUP3_Callback (void)
+{
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_PWREx_WKUP3Callback can be implemented in the user file
+ */
+}
+#endif /* defined (PWR_WKUPFR_WKUPF3) */
+
+/**
+ * @brief PWR WKUP4 interrupt callback.
+ * @retval None.
+ */
+__weak void HAL_PWREx_WKUP4_Callback (void)
+{
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_PWREx_WKUP4Callback can be implemented in the user file
+ */
+}
+
+#if defined (PWR_WKUPFR_WKUPF5)
+/**
+ * @brief PWR WKUP5 interrupt callback.
+ * @retval None.
+ */
+__weak void HAL_PWREx_WKUP5_Callback (void)
+{
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_PWREx_WKUP5Callback can be implemented in the user file
+ */
+}
+#endif /* defined (PWR_WKUPFR_WKUPF5) */
+
+/**
+ * @brief PWR WKUP6 interrupt callback.
+ * @retval None.
+ */
+__weak void HAL_PWREx_WKUP6_Callback (void)
+{
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_PWREx_WKUP6Callback can be implemented in the user file
+ */
+}
+/**
+ * @}
+ */
+
+/** @defgroup PWREx_Exported_Functions_Group3 Peripherals control functions
* @ingroup RTEMSBSPsARMSTM32H7
- * @brief Peripherals control functions
- *
-@verbatim
- ===============================================================================
- ##### Peripherals control functions #####
- ===============================================================================
-
- *** Main and Backup Regulators configuration ***
- ================================================
- [..]
- (+) The backup domain includes 4 Kbytes of backup SRAM accessible only
- from the CPU, and addressed in 32-bit, 16-bit or 8-bit mode. Its
- content is retained even in Standby or VBAT mode when the low power
- backup regulator is enabled. It can be considered as an internal
- EEPROM when VBAT is always present. You can use the
- HAL_PWREx_EnableBkUpReg() function to enable the low power backup
- regulator.
- (+) When the backup domain is supplied by VDD (analog switch connected to
- VDD) the backup SRAM is powered from VDD which replaces the VBAT power
- supply to save battery life.
- (+) The backup SRAM is not mass erased by a tamper event. It is read
- protected to prevent confidential data, such as cryptographic private
- key, from being accessed. The backup SRAM can be erased only through
- the Flash interface when a protection level change from level 1 to
- level 0 is requested.
- -@- Refer to the description of Read protection (RDP) in the Flash
- programming manual.
- (+) The main internal regulator can be configured to have a tradeoff
- between performance and power consumption when the device does not
- operate at the maximum frequency. This is done through
- HAL_PWREx_ControlVoltageScaling(VOS) function which configure the VOS
- bit in PWR_D3CR register.
- (+) The main internal regulator can be configured to operate in Low Power
- mode when the system enters STOP mode to further reduce power
- consumption.
- This is done through HAL_PWREx_ControlStopModeVoltageScaling(SVOS)
- function which configure the SVOS bit in PWR_CR1 register.
- The selected SVOS4 and SVOS5 levels add an additional startup delay
- when exiting from system Stop mode.
- -@- Refer to the product datasheets for more details.
-
- *** USB Regulator configuration ***
- ===================================
- [..]
- (+) The USB transceivers are supplied from a dedicated VDD33USB supply
- that can be provided either by the integrated USB regulator, or by an
- external USB supply.
- (+) The USB regulator is enabled by HAL_PWREx_EnableUSBReg() function, the
- VDD33USB is then provided from the USB regulator.
- (+) When the USB regulator is enabled, the VDD33USB supply level detector
- shall be enabled through HAL_PWREx_EnableUSBVoltageDetector()
- function.
- (+) The USB regulator is disabled through HAL_PWREx_DisableUSBReg()
- function and VDD33USB can be provided from an external supply. In this
- case VDD33USB and VDD50USB shall be connected together.
-
- *** VBAT battery charging ***
- =============================
- [..]
- (+) When VDD is present, the external battery connected to VBAT can be
- charged through an internal resistance. VBAT charging can be performed
- either through a 5 KOhm resistor or through a 1.5 KOhm resistor.
- (+) VBAT charging is enabled by HAL_PWREx_EnableBatteryCharging
- (ResistorValue) function with:
- (++) ResistorValue:
- (+++) PWR_BATTERY_CHARGING_RESISTOR_5: 5 KOhm resistor.
- (+++) PWR_BATTERY_CHARGING_RESISTOR_1_5: 1.5 KOhm resistor.
- (+) VBAT charging is disabled by HAL_PWREx_DisableBatteryCharging()
- function.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Enable the Backup Regulator.
- * @retval HAL status.
- */
-HAL_StatusTypeDef HAL_PWREx_EnableBkUpReg (void)
-{
- uint32_t tickstart;
-
- /* Enable the Backup regulator */
- SET_BIT (PWR->CR2, PWR_CR2_BREN);
-
- /* Get tick */
- tickstart = HAL_GetTick ();
-
- /* Wait till Backup regulator ready flag is set */
- while (__HAL_PWR_GET_FLAG (PWR_FLAG_BRR) == 0U)
- {
- if ((HAL_GetTick() - tickstart ) > PWR_FLAG_SETTING_DELAY)
- {
- return HAL_ERROR;
- }
- }
-
- return HAL_OK;
-}
-
-/**
- * @brief Disable the Backup Regulator.
- * @retval HAL status.
- */
-HAL_StatusTypeDef HAL_PWREx_DisableBkUpReg (void)
-{
- uint32_t tickstart;
-
- /* Disable the Backup regulator */
- CLEAR_BIT (PWR->CR2, PWR_CR2_BREN);
-
- /* Get tick */
- tickstart = HAL_GetTick ();
-
- /* Wait till Backup regulator ready flag is reset */
- while (__HAL_PWR_GET_FLAG (PWR_FLAG_BRR) != 0U)
- {
- if ((HAL_GetTick() - tickstart ) > PWR_FLAG_SETTING_DELAY)
- {
- return HAL_ERROR;
- }
- }
-
- return HAL_OK;
-}
-
-/**
- * @brief Enable the USB Regulator.
- * @retval HAL status.
- */
-HAL_StatusTypeDef HAL_PWREx_EnableUSBReg (void)
-{
- uint32_t tickstart;
-
- /* Enable the USB regulator */
- SET_BIT (PWR->CR3, PWR_CR3_USBREGEN);
-
- /* Get tick */
- tickstart = HAL_GetTick ();
-
- /* Wait till the USB regulator ready flag is set */
- while (__HAL_PWR_GET_FLAG (PWR_FLAG_USB33RDY) == 0U)
- {
- if ((HAL_GetTick() - tickstart ) > PWR_FLAG_SETTING_DELAY)
- {
- return HAL_ERROR;
- }
- }
-
- return HAL_OK;
-}
-
-/**
- * @brief Disable the USB Regulator.
- * @retval HAL status.
- */
-HAL_StatusTypeDef HAL_PWREx_DisableUSBReg (void)
-{
- uint32_t tickstart;
-
- /* Disable the USB regulator */
- CLEAR_BIT (PWR->CR3, PWR_CR3_USBREGEN);
-
- /* Get tick */
- tickstart = HAL_GetTick ();
-
- /* Wait till the USB regulator ready flag is reset */
- while(__HAL_PWR_GET_FLAG (PWR_FLAG_USB33RDY) != 0U)
- {
- if ((HAL_GetTick() - tickstart ) > PWR_FLAG_SETTING_DELAY)
- {
- return HAL_ERROR;
- }
- }
-
- return HAL_OK;
-}
-
-/**
- * @brief Enable the USB voltage level detector.
- * @retval None.
- */
-void HAL_PWREx_EnableUSBVoltageDetector (void)
-{
- /* Enable the USB voltage detector */
- SET_BIT (PWR->CR3, PWR_CR3_USB33DEN);
-}
-
-/**
- * @brief Disable the USB voltage level detector.
- * @retval None.
- */
-void HAL_PWREx_DisableUSBVoltageDetector (void)
-{
- /* Disable the USB voltage detector */
- CLEAR_BIT (PWR->CR3, PWR_CR3_USB33DEN);
-}
-
-/**
- * @brief Enable the Battery charging.
- * @note When VDD is present, charge the external battery through an internal
- * resistor.
- * @param ResistorValue : Specifies the charging resistor.
- * This parameter can be one of the following values :
- * @arg PWR_BATTERY_CHARGING_RESISTOR_5 : 5 KOhm resistor.
- * @arg PWR_BATTERY_CHARGING_RESISTOR_1_5 : 1.5 KOhm resistor.
- * @retval None.
- */
-void HAL_PWREx_EnableBatteryCharging (uint32_t ResistorValue)
-{
- /* Check the parameter */
- assert_param (IS_PWR_BATTERY_RESISTOR_SELECT (ResistorValue));
-
- /* Specify the charging resistor */
- MODIFY_REG (PWR->CR3, PWR_CR3_VBRS, ResistorValue);
-
- /* Enable the Battery charging */
- SET_BIT (PWR->CR3, PWR_CR3_VBE);
-}
-
-/**
- * @brief Disable the Battery charging.
- * @retval None.
- */
-void HAL_PWREx_DisableBatteryCharging (void)
-{
- /* Disable the Battery charging */
- CLEAR_BIT (PWR->CR3, PWR_CR3_VBE);
-}
-
-#if defined (PWR_CR1_BOOSTE)
-/**
- * @brief Enable the booster to guarantee the analog switch AC performance when
- * the VDD supply voltage is below 2V7.
- * @note The VDD supply voltage can be monitored through the PVD and the PLS
- * field bits.
- * @retval None.
- */
-void HAL_PWREx_EnableAnalogBooster (void)
-{
- /* Enable the Analog voltage */
- SET_BIT (PWR->CR1, PWR_CR1_AVD_READY);
-
- /* Enable VDDA booster */
- SET_BIT (PWR->CR1, PWR_CR1_BOOSTE);
-}
-
-/**
- * @brief Disable the analog booster.
- * @retval None.
- */
-void HAL_PWREx_DisableAnalogBooster (void)
-{
- /* Disable VDDA booster */
- CLEAR_BIT (PWR->CR1, PWR_CR1_BOOSTE);
-
- /* Disable the Analog voltage */
- CLEAR_BIT (PWR->CR1, PWR_CR1_AVD_READY);
-}
-#endif /* defined (PWR_CR1_BOOSTE) */
-/**
- * @}
- */
-
-/** @defgroup PWREx_Exported_Functions_Group4 Power Monitoring functions
+ * @brief Peripherals control functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripherals control functions #####
+ ===============================================================================
+
+ *** Main and Backup Regulators configuration ***
+ ================================================
+ [..]
+ (+) The backup domain includes 4 Kbytes of backup SRAM accessible only
+ from the CPU, and addressed in 32-bit, 16-bit or 8-bit mode. Its
+ content is retained even in Standby or VBAT mode when the low power
+ backup regulator is enabled. It can be considered as an internal
+ EEPROM when VBAT is always present. You can use the
+ HAL_PWREx_EnableBkUpReg() function to enable the low power backup
+ regulator.
+ (+) When the backup domain is supplied by VDD (analog switch connected to
+ VDD) the backup SRAM is powered from VDD which replaces the VBAT power
+ supply to save battery life.
+ (+) The backup SRAM is not mass erased by a tamper event. It is read
+ protected to prevent confidential data, such as cryptographic private
+ key, from being accessed. The backup SRAM can be erased only through
+ the Flash interface when a protection level change from level 1 to
+ level 0 is requested.
+ -@- Refer to the description of Read protection (RDP) in the Flash
+ programming manual.
+ (+) The main internal regulator can be configured to have a tradeoff
+ between performance and power consumption when the device does not
+ operate at the maximum frequency. This is done through
+ HAL_PWREx_ControlVoltageScaling(VOS) function which configure the VOS
+ bit in PWR_D3CR register.
+ (+) The main internal regulator can be configured to operate in Low Power
+ mode when the system enters STOP mode to further reduce power
+ consumption.
+ This is done through HAL_PWREx_ControlStopModeVoltageScaling(SVOS)
+ function which configure the SVOS bit in PWR_CR1 register.
+ The selected SVOS4 and SVOS5 levels add an additional startup delay
+ when exiting from system Stop mode.
+ -@- Refer to the product datasheets for more details.
+
+ *** USB Regulator configuration ***
+ ===================================
+ [..]
+ (+) The USB transceivers are supplied from a dedicated VDD33USB supply
+ that can be provided either by the integrated USB regulator, or by an
+ external USB supply.
+ (+) The USB regulator is enabled by HAL_PWREx_EnableUSBReg() function, the
+ VDD33USB is then provided from the USB regulator.
+ (+) When the USB regulator is enabled, the VDD33USB supply level detector
+ shall be enabled through HAL_PWREx_EnableUSBVoltageDetector()
+ function.
+ (+) The USB regulator is disabled through HAL_PWREx_DisableUSBReg()
+ function and VDD33USB can be provided from an external supply. In this
+ case VDD33USB and VDD50USB shall be connected together.
+
+ *** VBAT battery charging ***
+ =============================
+ [..]
+ (+) When VDD is present, the external battery connected to VBAT can be
+ charged through an internal resistance. VBAT charging can be performed
+ either through a 5 KOhm resistor or through a 1.5 KOhm resistor.
+ (+) VBAT charging is enabled by HAL_PWREx_EnableBatteryCharging
+ (ResistorValue) function with:
+ (++) ResistorValue:
+ (+++) PWR_BATTERY_CHARGING_RESISTOR_5: 5 KOhm resistor.
+ (+++) PWR_BATTERY_CHARGING_RESISTOR_1_5: 1.5 KOhm resistor.
+ (+) VBAT charging is disabled by HAL_PWREx_DisableBatteryCharging()
+ function.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Enable the Backup Regulator.
+ * @retval HAL status.
+ */
+HAL_StatusTypeDef HAL_PWREx_EnableBkUpReg (void)
+{
+ uint32_t tickstart;
+
+ /* Enable the Backup regulator */
+ SET_BIT (PWR->CR2, PWR_CR2_BREN);
+
+ /* Get tick */
+ tickstart = HAL_GetTick ();
+
+ /* Wait till Backup regulator ready flag is set */
+ while (__HAL_PWR_GET_FLAG (PWR_FLAG_BRR) == 0U)
+ {
+ if ((HAL_GetTick() - tickstart ) > PWR_FLAG_SETTING_DELAY)
+ {
+ return HAL_ERROR;
+ }
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Disable the Backup Regulator.
+ * @retval HAL status.
+ */
+HAL_StatusTypeDef HAL_PWREx_DisableBkUpReg (void)
+{
+ uint32_t tickstart;
+
+ /* Disable the Backup regulator */
+ CLEAR_BIT (PWR->CR2, PWR_CR2_BREN);
+
+ /* Get tick */
+ tickstart = HAL_GetTick ();
+
+ /* Wait till Backup regulator ready flag is reset */
+ while (__HAL_PWR_GET_FLAG (PWR_FLAG_BRR) != 0U)
+ {
+ if ((HAL_GetTick() - tickstart ) > PWR_FLAG_SETTING_DELAY)
+ {
+ return HAL_ERROR;
+ }
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Enable the USB Regulator.
+ * @retval HAL status.
+ */
+HAL_StatusTypeDef HAL_PWREx_EnableUSBReg (void)
+{
+ uint32_t tickstart;
+
+ /* Enable the USB regulator */
+ SET_BIT (PWR->CR3, PWR_CR3_USBREGEN);
+
+ /* Get tick */
+ tickstart = HAL_GetTick ();
+
+ /* Wait till the USB regulator ready flag is set */
+ while (__HAL_PWR_GET_FLAG (PWR_FLAG_USB33RDY) == 0U)
+ {
+ if ((HAL_GetTick() - tickstart ) > PWR_FLAG_SETTING_DELAY)
+ {
+ return HAL_ERROR;
+ }
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Disable the USB Regulator.
+ * @retval HAL status.
+ */
+HAL_StatusTypeDef HAL_PWREx_DisableUSBReg (void)
+{
+ uint32_t tickstart;
+
+ /* Disable the USB regulator */
+ CLEAR_BIT (PWR->CR3, PWR_CR3_USBREGEN);
+
+ /* Get tick */
+ tickstart = HAL_GetTick ();
+
+ /* Wait till the USB regulator ready flag is reset */
+ while(__HAL_PWR_GET_FLAG (PWR_FLAG_USB33RDY) != 0U)
+ {
+ if ((HAL_GetTick() - tickstart ) > PWR_FLAG_SETTING_DELAY)
+ {
+ return HAL_ERROR;
+ }
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Enable the USB voltage level detector.
+ * @retval None.
+ */
+void HAL_PWREx_EnableUSBVoltageDetector (void)
+{
+ /* Enable the USB voltage detector */
+ SET_BIT (PWR->CR3, PWR_CR3_USB33DEN);
+}
+
+/**
+ * @brief Disable the USB voltage level detector.
+ * @retval None.
+ */
+void HAL_PWREx_DisableUSBVoltageDetector (void)
+{
+ /* Disable the USB voltage detector */
+ CLEAR_BIT (PWR->CR3, PWR_CR3_USB33DEN);
+}
+
+/**
+ * @brief Enable the Battery charging.
+ * @note When VDD is present, charge the external battery through an internal
+ * resistor.
+ * @param ResistorValue : Specifies the charging resistor.
+ * This parameter can be one of the following values :
+ * @arg PWR_BATTERY_CHARGING_RESISTOR_5 : 5 KOhm resistor.
+ * @arg PWR_BATTERY_CHARGING_RESISTOR_1_5 : 1.5 KOhm resistor.
+ * @retval None.
+ */
+void HAL_PWREx_EnableBatteryCharging (uint32_t ResistorValue)
+{
+ /* Check the parameter */
+ assert_param (IS_PWR_BATTERY_RESISTOR_SELECT (ResistorValue));
+
+ /* Specify the charging resistor */
+ MODIFY_REG (PWR->CR3, PWR_CR3_VBRS, ResistorValue);
+
+ /* Enable the Battery charging */
+ SET_BIT (PWR->CR3, PWR_CR3_VBE);
+}
+
+/**
+ * @brief Disable the Battery charging.
+ * @retval None.
+ */
+void HAL_PWREx_DisableBatteryCharging (void)
+{
+ /* Disable the Battery charging */
+ CLEAR_BIT (PWR->CR3, PWR_CR3_VBE);
+}
+
+#if defined (PWR_CR1_BOOSTE)
+/**
+ * @brief Enable the booster to guarantee the analog switch AC performance when
+ * the VDD supply voltage is below 2V7.
+ * @note The VDD supply voltage can be monitored through the PVD and the PLS
+ * field bits.
+ * @retval None.
+ */
+void HAL_PWREx_EnableAnalogBooster (void)
+{
+ /* Enable the Analog voltage */
+ SET_BIT (PWR->CR1, PWR_CR1_AVD_READY);
+
+ /* Enable VDDA booster */
+ SET_BIT (PWR->CR1, PWR_CR1_BOOSTE);
+}
+
+/**
+ * @brief Disable the analog booster.
+ * @retval None.
+ */
+void HAL_PWREx_DisableAnalogBooster (void)
+{
+ /* Disable VDDA booster */
+ CLEAR_BIT (PWR->CR1, PWR_CR1_BOOSTE);
+
+ /* Disable the Analog voltage */
+ CLEAR_BIT (PWR->CR1, PWR_CR1_AVD_READY);
+}
+#endif /* defined (PWR_CR1_BOOSTE) */
+/**
+ * @}
+ */
+
+/** @defgroup PWREx_Exported_Functions_Group4 Power Monitoring functions
* @ingroup RTEMSBSPsARMSTM32H7
- * @brief Power Monitoring functions
- *
-@verbatim
- ===============================================================================
- ##### Power Monitoring functions #####
- ===============================================================================
-
- *** VBAT and Temperature supervision ***
- ========================================
- [..]
- (+) The VBAT battery voltage supply can be monitored by comparing it with
- two threshold levels: VBAThigh and VBATlow. VBATH flag and VBATL flags
- in the PWR control register 2 (PWR_CR2), indicate if VBAT is higher or
- lower than the threshold.
- (+) The temperature can be monitored by comparing it with two threshold
- levels, TEMPhigh and TEMPlow. TEMPH and TEMPL flags, in the PWR
- control register 2 (PWR_CR2), indicate whether the device temperature
- is higher or lower than the threshold.
- (+) The VBAT and the temperature monitoring is enabled by
- HAL_PWREx_EnableMonitoring() function and disabled by
- HAL_PWREx_DisableMonitoring() function.
- (+) The HAL_PWREx_GetVBATLevel() function returns the VBAT level which can
- be : PWR_VBAT_BELOW_LOW_THRESHOLD or PWR_VBAT_ABOVE_HIGH_THRESHOLD or
- PWR_VBAT_BETWEEN_HIGH_LOW_THRESHOLD.
- (+) The HAL_PWREx_GetTemperatureLevel() function returns the Temperature
- level which can be :
- PWR_TEMP_BELOW_LOW_THRESHOLD or PWR_TEMP_ABOVE_HIGH_THRESHOLD or
- PWR_TEMP_BETWEEN_HIGH_LOW_THRESHOLD.
-
- *** AVD configuration ***
- =========================
- [..]
- (+) The AVD is used to monitor the VDDA power supply by comparing it to a
- threshold selected by the AVD Level (ALS[3:0] bits in the PWR_CR1
- register).
- (+) A AVDO flag is available to indicate if VDDA is higher or lower
- than the AVD threshold. This event is internally connected to the EXTI
- line 16 to generate an interrupt if enabled.
- It is configurable through __HAL_PWR_AVD_EXTI_ENABLE_IT() macro.
- (+) The AVD is stopped in System Standby mode.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Enable the VBAT and temperature monitoring.
- * @retval HAL status.
- */
-void HAL_PWREx_EnableMonitoring (void)
-{
- /* Enable the VBAT and Temperature monitoring */
- SET_BIT (PWR->CR2, PWR_CR2_MONEN);
-}
-
-/**
- * @brief Disable the VBAT and temperature monitoring.
- * @retval HAL status.
- */
-void HAL_PWREx_DisableMonitoring (void)
-{
- /* Disable the VBAT and Temperature monitoring */
- CLEAR_BIT (PWR->CR2, PWR_CR2_MONEN);
-}
-
-/**
- * @brief Indicate whether the junction temperature is between, above or below
- * the thresholds.
- * @retval Temperature level.
- */
-uint32_t HAL_PWREx_GetTemperatureLevel (void)
-{
- uint32_t tempLevel, regValue;
-
- /* Read the temperature flags */
- regValue = READ_BIT (PWR->CR2, (PWR_CR2_TEMPH | PWR_CR2_TEMPL));
-
- /* Check if the temperature is below the threshold */
- if (regValue == PWR_CR2_TEMPL)
- {
- tempLevel = PWR_TEMP_BELOW_LOW_THRESHOLD;
- }
- /* Check if the temperature is above the threshold */
- else if (regValue == PWR_CR2_TEMPH)
- {
- tempLevel = PWR_TEMP_ABOVE_HIGH_THRESHOLD;
- }
- /* The temperature is between the thresholds */
- else
- {
- tempLevel = PWR_TEMP_BETWEEN_HIGH_LOW_THRESHOLD;
- }
-
- return tempLevel;
-}
-
-/**
- * @brief Indicate whether the Battery voltage level is between, above or below
- * the thresholds.
- * @retval VBAT level.
- */
-uint32_t HAL_PWREx_GetVBATLevel (void)
-{
- uint32_t VBATLevel, regValue;
-
- /* Read the VBAT flags */
- regValue = READ_BIT (PWR->CR2, (PWR_CR2_VBATH | PWR_CR2_VBATL));
-
- /* Check if the VBAT is below the threshold */
- if (regValue == PWR_CR2_VBATL)
- {
- VBATLevel = PWR_VBAT_BELOW_LOW_THRESHOLD;
- }
- /* Check if the VBAT is above the threshold */
- else if (regValue == PWR_CR2_VBATH)
- {
- VBATLevel = PWR_VBAT_ABOVE_HIGH_THRESHOLD;
- }
- /* The VBAT is between the thresholds */
- else
- {
- VBATLevel = PWR_VBAT_BETWEEN_HIGH_LOW_THRESHOLD;
- }
-
- return VBATLevel;
-}
-
-#if defined (PWR_CSR1_MMCVDO)
-/**
- * @brief Get the VDDMMC voltage level.
- * @retval The VDDMMC voltage level.
- */
-PWREx_MMC_VoltageLevel HAL_PWREx_GetMMCVoltage (void)
-{
- PWREx_MMC_VoltageLevel mmc_voltage;
-
- /* Check voltage detector output on VDDMMC value */
- if ((PWR->CSR1 & PWR_CSR1_MMCVDO_Msk) == 0U)
- {
- mmc_voltage = PWR_MMC_VOLTAGE_BELOW_1V2;
- }
- else
- {
- mmc_voltage = PWR_MMC_VOLTAGE_EQUAL_ABOVE_1V2;
- }
-
- return mmc_voltage;
-}
-#endif /* defined (PWR_CSR1_MMCVDO) */
-
-/**
- * @brief Configure the event mode and the voltage threshold detected by the
- * Analog Voltage Detector (AVD).
- * @param sConfigAVD : Pointer to an PWREx_AVDTypeDef structure that contains
- * the configuration information for the AVD.
- * @note Refer to the electrical characteristics of your device datasheet for
- * more details about the voltage threshold corresponding to each
- * detection level.
- * @note For dual core devices, please ensure to configure the EXTI lines for
- * the different Cortex-Mx through PWR_Exported_Macro provided by this
- * driver. All combination are allowed: wake up only Cortex-M7, wake up
- * only Cortex-M4 and wake up Cortex-M7 and Cortex-M4.
- * @retval None.
- */
-void HAL_PWREx_ConfigAVD (PWREx_AVDTypeDef *sConfigAVD)
-{
- /* Check the parameters */
- assert_param (IS_PWR_AVD_LEVEL (sConfigAVD->AVDLevel));
- assert_param (IS_PWR_AVD_MODE (sConfigAVD->Mode));
-
- /* Set the ALS[18:17] bits according to AVDLevel value */
- MODIFY_REG (PWR->CR1, PWR_CR1_ALS, sConfigAVD->AVDLevel);
-
- /* Clear any previous config */
-#if !defined (DUAL_CORE)
- __HAL_PWR_AVD_EXTI_DISABLE_EVENT ();
- __HAL_PWR_AVD_EXTI_DISABLE_IT ();
-#endif /* !defined (DUAL_CORE) */
-
- __HAL_PWR_AVD_EXTI_DISABLE_RISING_EDGE ();
- __HAL_PWR_AVD_EXTI_DISABLE_FALLING_EDGE ();
-
-#if !defined (DUAL_CORE)
- /* Configure the interrupt mode */
- if ((sConfigAVD->Mode & AVD_MODE_IT) == AVD_MODE_IT)
- {
- __HAL_PWR_AVD_EXTI_ENABLE_IT ();
- }
-
- /* Configure the event mode */
- if ((sConfigAVD->Mode & AVD_MODE_EVT) == AVD_MODE_EVT)
- {
- __HAL_PWR_AVD_EXTI_ENABLE_EVENT ();
- }
-#endif /* !defined (DUAL_CORE) */
-
- /* Rising edge configuration */
- if ((sConfigAVD->Mode & AVD_RISING_EDGE) == AVD_RISING_EDGE)
- {
- __HAL_PWR_AVD_EXTI_ENABLE_RISING_EDGE ();
- }
-
- /* Falling edge configuration */
- if ((sConfigAVD->Mode & AVD_FALLING_EDGE) == AVD_FALLING_EDGE)
- {
- __HAL_PWR_AVD_EXTI_ENABLE_FALLING_EDGE ();
- }
-}
-
-/**
- * @brief Enable the Analog Voltage Detector (AVD).
- * @retval None.
- */
-void HAL_PWREx_EnableAVD (void)
-{
- /* Enable the Analog Voltage Detector */
- SET_BIT (PWR->CR1, PWR_CR1_AVDEN);
-}
-
-/**
- * @brief Disable the Analog Voltage Detector(AVD).
- * @retval None.
- */
-void HAL_PWREx_DisableAVD (void)
-{
- /* Disable the Analog Voltage Detector */
- CLEAR_BIT (PWR->CR1, PWR_CR1_AVDEN);
-}
-
-/**
- * @brief This function handles the PWR PVD/AVD interrupt request.
- * @note This API should be called under the PVD_AVD_IRQHandler().
- * @retval None
- */
-void HAL_PWREx_PVD_AVD_IRQHandler (void)
-{
- /* Check if the Programmable Voltage Detector is enabled (PVD) */
- if(READ_BIT (PWR->CR1, PWR_CR1_PVDEN) != 0U)
- {
-#if defined (DUAL_CORE)
- if (HAL_GetCurrentCPUID () == CM7_CPUID)
-#endif /* defined (DUAL_CORE) */
- {
- /* Check PWR D1/CD EXTI flag */
- if(__HAL_PWR_PVD_EXTI_GET_FLAG () != 0U)
- {
- /* PWR PVD interrupt user callback */
- HAL_PWR_PVDCallback ();
-
- /* Clear PWR EXTI D1/CD pending bit */
- __HAL_PWR_PVD_EXTI_CLEAR_FLAG ();
- }
- }
-#if defined (DUAL_CORE)
- else
- {
- /* Check PWR EXTI D2 flag */
- if (__HAL_PWR_PVD_EXTID2_GET_FLAG () != 0U)
- {
- /* PWR PVD interrupt user callback */
- HAL_PWR_PVDCallback ();
-
- /* Clear PWR EXTI D2 pending bit */
- __HAL_PWR_PVD_EXTID2_CLEAR_FLAG();
- }
- }
-#endif /* defined (DUAL_CORE) */
- }
-
- /* Check if the Analog Voltage Detector is enabled (AVD) */
- if (READ_BIT (PWR->CR1, PWR_CR1_AVDEN) != 0U)
- {
-#if defined (DUAL_CORE)
- if (HAL_GetCurrentCPUID () == CM7_CPUID)
-#endif /* defined (DUAL_CORE) */
- {
- /* Check PWR EXTI D1/CD flag */
- if (__HAL_PWR_AVD_EXTI_GET_FLAG () != 0U)
- {
- /* PWR AVD interrupt user callback */
- HAL_PWREx_AVDCallback ();
-
- /* Clear PWR EXTI D1/CD pending bit */
- __HAL_PWR_AVD_EXTI_CLEAR_FLAG ();
- }
- }
-#if defined (DUAL_CORE)
- else
- {
- /* Check PWR EXTI D2 flag */
- if (__HAL_PWR_AVD_EXTID2_GET_FLAG () != 0U)
- {
- /* PWR AVD interrupt user callback */
- HAL_PWREx_AVDCallback ();
-
- /* Clear PWR EXTI D2 pending bit */
- __HAL_PWR_AVD_EXTID2_CLEAR_FLAG ();
- }
- }
-#endif /* defined (DUAL_CORE) */
- }
-}
-
-/**
- * @brief PWR AVD interrupt callback.
- * @retval None.
- */
-__weak void HAL_PWREx_AVDCallback (void)
-{
- /* NOTE : This function should not be modified, when the callback is needed,
- the HAL_PWR_AVDCallback can be implemented in the user file
- */
-}
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#endif /* HAL_PWR_MODULE_ENABLED */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+ * @brief Power Monitoring functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Power Monitoring functions #####
+ ===============================================================================
+
+ *** VBAT and Temperature supervision ***
+ ========================================
+ [..]
+ (+) The VBAT battery voltage supply can be monitored by comparing it with
+ two threshold levels: VBAThigh and VBATlow. VBATH flag and VBATL flags
+ in the PWR control register 2 (PWR_CR2), indicate if VBAT is higher or
+ lower than the threshold.
+ (+) The temperature can be monitored by comparing it with two threshold
+ levels, TEMPhigh and TEMPlow. TEMPH and TEMPL flags, in the PWR
+ control register 2 (PWR_CR2), indicate whether the device temperature
+ is higher or lower than the threshold.
+ (+) The VBAT and the temperature monitoring is enabled by
+ HAL_PWREx_EnableMonitoring() function and disabled by
+ HAL_PWREx_DisableMonitoring() function.
+ (+) The HAL_PWREx_GetVBATLevel() function returns the VBAT level which can
+ be : PWR_VBAT_BELOW_LOW_THRESHOLD or PWR_VBAT_ABOVE_HIGH_THRESHOLD or
+ PWR_VBAT_BETWEEN_HIGH_LOW_THRESHOLD.
+ (+) The HAL_PWREx_GetTemperatureLevel() function returns the Temperature
+ level which can be :
+ PWR_TEMP_BELOW_LOW_THRESHOLD or PWR_TEMP_ABOVE_HIGH_THRESHOLD or
+ PWR_TEMP_BETWEEN_HIGH_LOW_THRESHOLD.
+
+ *** AVD configuration ***
+ =========================
+ [..]
+ (+) The AVD is used to monitor the VDDA power supply by comparing it to a
+ threshold selected by the AVD Level (ALS[3:0] bits in the PWR_CR1
+ register).
+ (+) A AVDO flag is available to indicate if VDDA is higher or lower
+ than the AVD threshold. This event is internally connected to the EXTI
+ line 16 to generate an interrupt if enabled.
+ It is configurable through __HAL_PWR_AVD_EXTI_ENABLE_IT() macro.
+ (+) The AVD is stopped in System Standby mode.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Enable the VBAT and temperature monitoring.
+ * @retval HAL status.
+ */
+void HAL_PWREx_EnableMonitoring (void)
+{
+ /* Enable the VBAT and Temperature monitoring */
+ SET_BIT (PWR->CR2, PWR_CR2_MONEN);
+}
+
+/**
+ * @brief Disable the VBAT and temperature monitoring.
+ * @retval HAL status.
+ */
+void HAL_PWREx_DisableMonitoring (void)
+{
+ /* Disable the VBAT and Temperature monitoring */
+ CLEAR_BIT (PWR->CR2, PWR_CR2_MONEN);
+}
+
+/**
+ * @brief Indicate whether the junction temperature is between, above or below
+ * the thresholds.
+ * @retval Temperature level.
+ */
+uint32_t HAL_PWREx_GetTemperatureLevel (void)
+{
+ uint32_t tempLevel, regValue;
+
+ /* Read the temperature flags */
+ regValue = READ_BIT (PWR->CR2, (PWR_CR2_TEMPH | PWR_CR2_TEMPL));
+
+ /* Check if the temperature is below the threshold */
+ if (regValue == PWR_CR2_TEMPL)
+ {
+ tempLevel = PWR_TEMP_BELOW_LOW_THRESHOLD;
+ }
+ /* Check if the temperature is above the threshold */
+ else if (regValue == PWR_CR2_TEMPH)
+ {
+ tempLevel = PWR_TEMP_ABOVE_HIGH_THRESHOLD;
+ }
+ /* The temperature is between the thresholds */
+ else
+ {
+ tempLevel = PWR_TEMP_BETWEEN_HIGH_LOW_THRESHOLD;
+ }
+
+ return tempLevel;
+}
+
+/**
+ * @brief Indicate whether the Battery voltage level is between, above or below
+ * the thresholds.
+ * @retval VBAT level.
+ */
+uint32_t HAL_PWREx_GetVBATLevel (void)
+{
+ uint32_t VBATLevel, regValue;
+
+ /* Read the VBAT flags */
+ regValue = READ_BIT (PWR->CR2, (PWR_CR2_VBATH | PWR_CR2_VBATL));
+
+ /* Check if the VBAT is below the threshold */
+ if (regValue == PWR_CR2_VBATL)
+ {
+ VBATLevel = PWR_VBAT_BELOW_LOW_THRESHOLD;
+ }
+ /* Check if the VBAT is above the threshold */
+ else if (regValue == PWR_CR2_VBATH)
+ {
+ VBATLevel = PWR_VBAT_ABOVE_HIGH_THRESHOLD;
+ }
+ /* The VBAT is between the thresholds */
+ else
+ {
+ VBATLevel = PWR_VBAT_BETWEEN_HIGH_LOW_THRESHOLD;
+ }
+
+ return VBATLevel;
+}
+
+#if defined (PWR_CSR1_MMCVDO)
+/**
+ * @brief Get the VDDMMC voltage level.
+ * @retval The VDDMMC voltage level.
+ */
+PWREx_MMC_VoltageLevel HAL_PWREx_GetMMCVoltage (void)
+{
+ PWREx_MMC_VoltageLevel mmc_voltage;
+
+ /* Check voltage detector output on VDDMMC value */
+ if ((PWR->CSR1 & PWR_CSR1_MMCVDO_Msk) == 0U)
+ {
+ mmc_voltage = PWR_MMC_VOLTAGE_BELOW_1V2;
+ }
+ else
+ {
+ mmc_voltage = PWR_MMC_VOLTAGE_EQUAL_ABOVE_1V2;
+ }
+
+ return mmc_voltage;
+}
+#endif /* defined (PWR_CSR1_MMCVDO) */
+
+/**
+ * @brief Configure the event mode and the voltage threshold detected by the
+ * Analog Voltage Detector (AVD).
+ * @param sConfigAVD : Pointer to an PWREx_AVDTypeDef structure that contains
+ * the configuration information for the AVD.
+ * @note Refer to the electrical characteristics of your device datasheet for
+ * more details about the voltage threshold corresponding to each
+ * detection level.
+ * @note For dual core devices, please ensure to configure the EXTI lines for
+ * the different Cortex-Mx through PWR_Exported_Macro provided by this
+ * driver. All combination are allowed: wake up only Cortex-M7, wake up
+ * only Cortex-M4 and wake up Cortex-M7 and Cortex-M4.
+ * @retval None.
+ */
+void HAL_PWREx_ConfigAVD (PWREx_AVDTypeDef *sConfigAVD)
+{
+ /* Check the parameters */
+ assert_param (IS_PWR_AVD_LEVEL (sConfigAVD->AVDLevel));
+ assert_param (IS_PWR_AVD_MODE (sConfigAVD->Mode));
+
+ /* Set the ALS[18:17] bits according to AVDLevel value */
+ MODIFY_REG (PWR->CR1, PWR_CR1_ALS, sConfigAVD->AVDLevel);
+
+ /* Clear any previous config */
+#if !defined (DUAL_CORE)
+ __HAL_PWR_AVD_EXTI_DISABLE_EVENT ();
+ __HAL_PWR_AVD_EXTI_DISABLE_IT ();
+#endif /* !defined (DUAL_CORE) */
+
+ __HAL_PWR_AVD_EXTI_DISABLE_RISING_EDGE ();
+ __HAL_PWR_AVD_EXTI_DISABLE_FALLING_EDGE ();
+
+#if !defined (DUAL_CORE)
+ /* Configure the interrupt mode */
+ if ((sConfigAVD->Mode & AVD_MODE_IT) == AVD_MODE_IT)
+ {
+ __HAL_PWR_AVD_EXTI_ENABLE_IT ();
+ }
+
+ /* Configure the event mode */
+ if ((sConfigAVD->Mode & AVD_MODE_EVT) == AVD_MODE_EVT)
+ {
+ __HAL_PWR_AVD_EXTI_ENABLE_EVENT ();
+ }
+#endif /* !defined (DUAL_CORE) */
+
+ /* Rising edge configuration */
+ if ((sConfigAVD->Mode & AVD_RISING_EDGE) == AVD_RISING_EDGE)
+ {
+ __HAL_PWR_AVD_EXTI_ENABLE_RISING_EDGE ();
+ }
+
+ /* Falling edge configuration */
+ if ((sConfigAVD->Mode & AVD_FALLING_EDGE) == AVD_FALLING_EDGE)
+ {
+ __HAL_PWR_AVD_EXTI_ENABLE_FALLING_EDGE ();
+ }
+}
+
+/**
+ * @brief Enable the Analog Voltage Detector (AVD).
+ * @retval None.
+ */
+void HAL_PWREx_EnableAVD (void)
+{
+ /* Enable the Analog Voltage Detector */
+ SET_BIT (PWR->CR1, PWR_CR1_AVDEN);
+}
+
+/**
+ * @brief Disable the Analog Voltage Detector(AVD).
+ * @retval None.
+ */
+void HAL_PWREx_DisableAVD (void)
+{
+ /* Disable the Analog Voltage Detector */
+ CLEAR_BIT (PWR->CR1, PWR_CR1_AVDEN);
+}
+
+/**
+ * @brief This function handles the PWR PVD/AVD interrupt request.
+ * @note This API should be called under the PVD_AVD_IRQHandler().
+ * @retval None
+ */
+void HAL_PWREx_PVD_AVD_IRQHandler (void)
+{
+ /* Check if the Programmable Voltage Detector is enabled (PVD) */
+ if (READ_BIT (PWR->CR1, PWR_CR1_PVDEN) != 0U)
+ {
+#if defined (DUAL_CORE)
+ if (HAL_GetCurrentCPUID () == CM7_CPUID)
+#endif /* defined (DUAL_CORE) */
+ {
+ /* Check PWR D1/CD EXTI flag */
+ if (__HAL_PWR_PVD_EXTI_GET_FLAG () != 0U)
+ {
+ /* PWR PVD interrupt user callback */
+ HAL_PWR_PVDCallback ();
+
+ /* Clear PWR EXTI D1/CD pending bit */
+ __HAL_PWR_PVD_EXTI_CLEAR_FLAG ();
+ }
+ }
+#if defined (DUAL_CORE)
+ else
+ {
+ /* Check PWR EXTI D2 flag */
+ if (__HAL_PWR_PVD_EXTID2_GET_FLAG () != 0U)
+ {
+ /* PWR PVD interrupt user callback */
+ HAL_PWR_PVDCallback ();
+
+ /* Clear PWR EXTI D2 pending bit */
+ __HAL_PWR_PVD_EXTID2_CLEAR_FLAG();
+ }
+ }
+#endif /* defined (DUAL_CORE) */
+ }
+
+ /* Check if the Analog Voltage Detector is enabled (AVD) */
+ if (READ_BIT (PWR->CR1, PWR_CR1_AVDEN) != 0U)
+ {
+#if defined (DUAL_CORE)
+ if (HAL_GetCurrentCPUID () == CM7_CPUID)
+#endif /* defined (DUAL_CORE) */
+ {
+ /* Check PWR EXTI D1/CD flag */
+ if (__HAL_PWR_AVD_EXTI_GET_FLAG () != 0U)
+ {
+ /* PWR AVD interrupt user callback */
+ HAL_PWREx_AVDCallback ();
+
+ /* Clear PWR EXTI D1/CD pending bit */
+ __HAL_PWR_AVD_EXTI_CLEAR_FLAG ();
+ }
+ }
+#if defined (DUAL_CORE)
+ else
+ {
+ /* Check PWR EXTI D2 flag */
+ if (__HAL_PWR_AVD_EXTID2_GET_FLAG () != 0U)
+ {
+ /* PWR AVD interrupt user callback */
+ HAL_PWREx_AVDCallback ();
+
+ /* Clear PWR EXTI D2 pending bit */
+ __HAL_PWR_AVD_EXTID2_CLEAR_FLAG ();
+ }
+ }
+#endif /* defined (DUAL_CORE) */
+ }
+}
+
+/**
+ * @brief PWR AVD interrupt callback.
+ * @retval None.
+ */
+__weak void HAL_PWREx_AVDCallback (void)
+{
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_PWR_AVDCallback can be implemented in the user file
+ */
+}
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* HAL_PWR_MODULE_ENABLED */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
generated by cgit v1.2.3 (git 2.25.1) at 2024-04-19 08:16:46 +0000