diff options
Diffstat (limited to 'bsps/arm/stm32h7/boards/stm/stm32h7b3i-dk/system_stm32h7xx.c')
-rw-r--r-- | bsps/arm/stm32h7/boards/stm/stm32h7b3i-dk/system_stm32h7xx.c | 367 |
1 files changed, 367 insertions, 0 deletions
diff --git a/bsps/arm/stm32h7/boards/stm/stm32h7b3i-dk/system_stm32h7xx.c b/bsps/arm/stm32h7/boards/stm/stm32h7b3i-dk/system_stm32h7xx.c new file mode 100644 index 0000000000..52e8eaafc4 --- /dev/null +++ b/bsps/arm/stm32h7/boards/stm/stm32h7b3i-dk/system_stm32h7xx.c @@ -0,0 +1,367 @@ +/** + ****************************************************************************** + * @file system_stm32h7xx.c + * @author MCD Application Team + * @brief CMSIS Cortex-Mx Device Peripheral Access Layer System Source File. + * + * This file provides two functions and one global variable to be called from + * user application: + * - SystemInit(): This function is called at startup just after reset and + * before branch to main program. This call is made inside + * the "startup_stm32h7xx.s" file. + * + * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used + * by the user application to setup the SysTick + * timer or configure other parameters. + * + * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must + * be called whenever the core clock is changed + * during program execution. + * + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32h7xx_system + * @{ + */ + +/** @addtogroup STM32H7xx_System_Private_Includes + * @{ + */ + +#include "stm32h7xx.h" +#include <math.h> +#ifdef __rtems__ +#include <bsp/linker-symbols.h> +#include <bspopts.h> + +#define HSE_VALUE STM32H7_HSE_FREQUENCY + +#endif /* __rtems__ */ +#if !defined (HSE_VALUE) +#define HSE_VALUE ((uint32_t)24000000) /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (CSI_VALUE) + #define CSI_VALUE ((uint32_t)4000000) /*!< Value of the Internal oscillator in Hz*/ +#endif /* CSI_VALUE */ + +#if !defined (HSI_VALUE) + #define HSI_VALUE ((uint32_t)64000000) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + + +/** + * @} + */ + +/** @addtogroup STM32H7xx_System_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32H7xx_System_Private_Defines + * @{ + */ + +/************************* Miscellaneous Configuration ************************/ +/*!< Uncomment the following line if you need to use initialized data in CD domain AHB SRAM */ +/* #define DATA_IN_CD_AHB_SRAM */ + +/*!< Uncomment the following line if you need to relocate your vector Table in + Internal SRAM. */ +/* #define VECT_TAB_SRAM */ +#define VECT_TAB_OFFSET 0x00000000UL /*!< Vector Table base offset field. + This value must be a multiple of 0x200. */ +/******************************************************************************/ + +/** + * @} + */ + +/** @addtogroup STM32H7xx_System_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32H7xx_System_Private_Variables + * @{ + */ + /* This variable is updated in three ways: + 1) by calling CMSIS function SystemCoreClockUpdate() + 2) by calling HAL API function HAL_RCC_GetHCLKFreq() + 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency + Note: If you use this function to configure the system clock; then there + is no need to call the 2 first functions listed above, since SystemCoreClock + variable is updated automatically. + */ +#ifndef __rtems__ + uint32_t SystemCoreClock = 64000000; + uint32_t SystemD2Clock = 64000000; /* AXI and AHBs Clock frequency */ +#else /* __rtems__ */ + RTEMS_SECTION(".rtemsstack") uint32_t SystemCoreClock; + RTEMS_SECTION(".rtemsstack") uint32_t SystemD2Clock; +#endif /* __rtems__ */ + const uint8_t D1CorePrescTable[16] = {0, 0, 0, 0, 1, 2, 3, 4, 1, 2, 3, 4, 6, 7, 8, 9}; /* CPU Domain Core Prescaler Table */ + +/** + * @} + */ + +/** @addtogroup STM32H7xx_System_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32H7xx_System_Private_Functions + * @{ + */ + +/** + * @brief Setup the microcontroller system + * Initialize the FPU setting and vector table location + * configuration. + * @param None + * @retval None + */ +void SystemInit (void) +{ +#ifdef DATA_IN_CD_AHB_SRAM + __IO uint32_t tmpreg; +#endif /* DATA_IN_CD_AHB_SRAM */ + + /* FPU settings ------------------------------------------------------------*/ + #if (__FPU_PRESENT == 1) && (__FPU_USED == 1) + SCB->CPACR |= ((3UL << (10*2))|(3UL << (11*2))); /* set CP10 and CP11 Full Access */ + #endif + /* Reset the RCC clock configuration to the default reset state ------------*/ + /* Set HSION bit */ + RCC->CR |= RCC_CR_HSION; + + /* Reset CFGR register */ + RCC->CFGR = 0x00000000; + + /* Reset HSEON, CSSON , CSION,RC48ON, CSIKERON PLL1ON, PLL2ON and PLL3ON bits */ + RCC->CR &= 0xEAF6ED7FU; + + /* Reset CDCFGR1 register */ + RCC->CDCFGR1 = 0x00000000; + + /* Reset CDCFGR2 register */ + RCC->CDCFGR2 = 0x00000000; + + /* Reset SRDCFGR register */ + RCC->SRDCFGR = 0x00000000; + + /* Reset PLLCKSELR register */ + RCC->PLLCKSELR = 0x02020200; + + /* Reset PLLCFGR register */ + RCC->PLLCFGR = 0x01FF0000; + /* Reset PLL1DIVR register */ + RCC->PLL1DIVR = 0x01010280; + /* Reset PLL1FRACR register */ + RCC->PLL1FRACR = 0x00000000; + + /* Reset PLL2DIVR register */ + RCC->PLL2DIVR = 0x01010280; + + /* Reset PLL2FRACR register */ + + RCC->PLL2FRACR = 0x00000000; + /* Reset PLL3DIVR register */ + RCC->PLL3DIVR = 0x01010280; + + /* Reset PLL3FRACR register */ + RCC->PLL3FRACR = 0x00000000; + + /* Reset HSEBYP bit */ + RCC->CR &= 0xFFFBFFFFU; + + /* Disable all interrupts */ + RCC->CIER = 0x00000000; + +#ifdef DATA_IN_CD_AHB_SRAM + /* in case of initialized data in CD AHB SRAM, enable the CD AHB SRAM clock */ + RCC->AHB2ENR |= (RCC_AHB2ENR_AHBSRAM1EN | RCC_AHB2ENR_AHBSRAM2EN); +#ifndef __rtems__ + tmpreg = RCC->AHB2ENR; + (void) tmpreg; +#else /* __rtems__ */ + RCC->AHB2ENR; +#endif /* __rtems__ */ +#endif /* DATA_IN_CD_AHB_SRAM */ + +/* + * Disable the FMC bank1 (enabled after reset). + * This, prevents CPU speculation access on this bank which blocks the use of FMC during + * 24us. During this time the others FMC master (such as LTDC) cannot use it! + */ + FMC_Bank1_R->BTCR[0] = 0x000030D2; + +#ifndef __rtems__ + /* Configure the Vector Table location add offset address for cortex-M7 ------------------*/ +#ifdef VECT_TAB_SRAM + SCB->VTOR = CD_AXISRAM1_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal CD AXI-RAM */ +#else + SCB->VTOR = FLASH_BANK1_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */ +#endif +#else /* __rtems__ */ + SCB->VTOR = (uint32_t) bsp_start_vector_table_begin; +#endif /* __rtems__ */ + +} + +/** + * @brief Update SystemCoreClock variable according to Clock Register Values. + * The SystemCoreClock variable contains the core clock , it can + * be used by the user application to setup the SysTick timer or configure + * other parameters. + * + * @note Each time the core clock changes, this function must be called + * to update SystemCoreClock variable value. Otherwise, any configuration + * based on this variable will be incorrect. + * + * @note - The system frequency computed by this function is not the real + * frequency in the chip. It is calculated based on the predefined + * constant and the selected clock source: + * + * - If SYSCLK source is CSI, SystemCoreClock will contain the CSI_VALUE(*) + * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(**) + * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(***) + * - If SYSCLK source is PLL, SystemCoreClock will contain the CSI_VALUE(*), + * HSI_VALUE(**) or HSE_VALUE(***) multiplied/divided by the PLL factors. + * + * (*) CSI_VALUE is a constant defined in stm32h7xx_hal.h file (default value + * 4 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * (**) HSI_VALUE is a constant defined in stm32h7xx_hal.h file (default value + * 64 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * + * (***)HSE_VALUE is a constant defined in stm32h7xx_hal.h file (default value + * 25 MHz), user has to ensure that HSE_VALUE is same as the real + * frequency of the crystal used. Otherwise, this function may + * have wrong result. + * + * - The result of this function could be not correct when using fractional + * value for HSE crystal. + * @param None + * @retval None + */ +void SystemCoreClockUpdate (void) +{ + uint32_t pllp, pllsource, pllm, pllfracen, hsivalue, tmp; + float_t fracn1, pllvco; + + /* Get SYSCLK source -------------------------------------------------------*/ + + switch (RCC->CFGR & RCC_CFGR_SWS) + { + case RCC_CFGR_SWS_HSI: /* HSI used as system clock source */ + SystemCoreClock = (uint32_t) (HSI_VALUE >> ((RCC->CR & RCC_CR_HSIDIV)>> 3)); + break; + + case RCC_CFGR_SWS_CSI: /* CSI used as system clock source */ + SystemCoreClock = CSI_VALUE; + break; + + case RCC_CFGR_SWS_HSE: /* HSE used as system clock source */ + SystemCoreClock = HSE_VALUE; + break; + + case RCC_CFGR_SWS_PLL1: /* PLL1 used as system clock source */ + + /* PLL_VCO = (HSE_VALUE or HSI_VALUE or CSI_VALUE/ PLLM) * PLLN + SYSCLK = PLL_VCO / PLLR + */ + pllsource = (RCC->PLLCKSELR & RCC_PLLCKSELR_PLLSRC); + pllm = ((RCC->PLLCKSELR & RCC_PLLCKSELR_DIVM1)>> 4) ; + pllfracen = ((RCC->PLLCFGR & RCC_PLLCFGR_PLL1FRACEN)>>RCC_PLLCFGR_PLL1FRACEN_Pos); + fracn1 = (float_t)(uint32_t)(pllfracen* ((RCC->PLL1FRACR & RCC_PLL1FRACR_FRACN1)>> 3)); + + if (pllm != 0U) + { + switch (pllsource) + { + case RCC_PLLCKSELR_PLLSRC_HSI: /* HSI used as PLL clock source */ + + hsivalue = (HSI_VALUE >> ((RCC->CR & RCC_CR_HSIDIV)>> 3)) ; + pllvco = ( (float_t)hsivalue / (float_t)pllm) * ((float_t)(uint32_t)(RCC->PLL1DIVR & RCC_PLL1DIVR_N1) + (fracn1/(float_t)0x2000) +(float_t)1 ); + + break; + + case RCC_PLLCKSELR_PLLSRC_CSI: /* CSI used as PLL clock source */ + pllvco = ((float_t)CSI_VALUE / (float_t)pllm) * ((float_t)(uint32_t)(RCC->PLL1DIVR & RCC_PLL1DIVR_N1) + (fracn1/(float_t)0x2000) +(float_t)1 ); + break; + + case RCC_PLLCKSELR_PLLSRC_HSE: /* HSE used as PLL clock source */ + pllvco = ((float_t)HSE_VALUE / (float_t)pllm) * ((float_t)(uint32_t)(RCC->PLL1DIVR & RCC_PLL1DIVR_N1) + (fracn1/(float_t)0x2000) +(float_t)1 ); + break; + + default: + pllvco = ((float_t)CSI_VALUE / (float_t)pllm) * ((float_t)(uint32_t)(RCC->PLL1DIVR & RCC_PLL1DIVR_N1) + (fracn1/(float_t)0x2000) +(float_t)1 ); + break; + } + pllp = (((RCC->PLL1DIVR & RCC_PLL1DIVR_P1) >>9) + 1U ) ; + SystemCoreClock = (uint32_t)(float_t)(pllvco/(float_t)pllp); + } + else + { + SystemCoreClock = 0U; + } + break; + + default: + SystemCoreClock = CSI_VALUE; + break; + } + + /* Compute SystemClock frequency --------------------------------------------------*/ + + tmp = D1CorePrescTable[(RCC->CDCFGR1 & RCC_CDCFGR1_CDCPRE)>> RCC_CDCFGR1_CDCPRE_Pos]; + + /* SystemCoreClock frequency : CM7 CPU frequency */ + SystemCoreClock >>= tmp; + + /* SystemD2Clock frequency : AXI and AHBs Clock frequency */ + SystemD2Clock = (SystemCoreClock >> ((D1CorePrescTable[(RCC->CDCFGR1 & RCC_CDCFGR1_HPRE)>> RCC_CDCFGR1_HPRE_Pos]) & 0x1FU)); + +} + + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ |