diff options
Diffstat (limited to 'bsps/arm/stm32h7/boards/stm/stm32h757i-eval/system_stm32h7xx.c')
| -rw-r--r-- | bsps/arm/stm32h7/boards/stm/stm32h757i-eval/system_stm32h7xx.c | 843 |
1 files changed, 843 insertions, 0 deletions
diff --git a/bsps/arm/stm32h7/boards/stm/stm32h757i-eval/system_stm32h7xx.c b/bsps/arm/stm32h7/boards/stm/stm32h757i-eval/system_stm32h7xx.c new file mode 100644 index 0000000000..59e66e133e --- /dev/null +++ b/bsps/arm/stm32h7/boards/stm/stm32h757i-eval/system_stm32h7xx.c @@ -0,0 +1,843 @@ +/* SPDX-License-Identifier: BSD-3-Clause */ +/** + ****************************************************************************** + * @file system_stm32h7xx.c + * @author MCD Application Team + * @brief CMSIS Cortex-Mx Device Peripheral Access Layer System Source File. + * + * This file provides two functions and one global variable to be called from + * user application: + * - SystemInit(): This function is called at startup just after reset and + * before branch to main program. This call is made inside + * the "startup_stm32h7xx.s" file. + * + * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used + * by the user application to setup the SysTick + * timer or configure other parameters. + * + * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must + * be called whenever the core clock is changed + * during program execution. + * + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2019 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +/* + * RTEMS committer clarification comment on license above: + * + * This file comes from STM32CubeH7 project from its Projects + * subdirectory. There is Templates subdirectory per every supported + * BSP there. The Templates contains the file. In our case the file is + * here: + * https://github.com/STMicroelectronics/STM32CubeH7/blob/master/Projects/STM32H747I-EVAL/Templates/BootCM4_CM7/Common/Src/system_stm32h7xx.c + * + * When we go up in the directory tree starting from the file, we find + * out that the "root directory" in the sense of license claim above is Templates + * directory here: + * https://github.com/STMicroelectronics/STM32CubeH7/tree/master/Projects/STM32H747I-EVAL/Templates + * + * This directory contains LICENSE.md file with a following license text: + * + * Copyright 2019 STMicroelectronics. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation and/or + * other materials provided with the distribution. + * + * 3. Neither the name of the copyright holder nor the names of its contributors + * may be used to endorse or promote products derived from this software without + * specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32h7xx_system + * @{ + */ + +/** @addtogroup STM32H7xx_System_Private_Includes + * @{ + */ + +#include "stm32h7xx.h" +#include <math.h> +#ifdef __rtems__ +#include <bsp/linker-symbols.h> +#include <bspopts.h> + +#define HSE_VALUE STM32H7_HSE_FREQUENCY + +#endif /* __rtems__ */ +#if !defined (HSE_VALUE) +#define HSE_VALUE ((uint32_t)25000000) /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (CSI_VALUE) + #define CSI_VALUE ((uint32_t)4000000) /*!< Value of the Internal oscillator in Hz*/ +#endif /* CSI_VALUE */ + +#if !defined (HSI_VALUE) + #define HSI_VALUE ((uint32_t)64000000) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @} + */ + +/** @addtogroup STM32H7xx_System_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32H7xx_System_Private_Defines + * @{ + */ + +/************************* Miscellaneous Configuration ************************/ +/*!< Uncomment the following line if you need to use external SRAM or SDRAM mounted + on EVAL board as data memory */ +#define DATA_IN_ExtSRAM +#define DATA_IN_ExtSDRAM + +/*!< Uncomment the following line if you need to relocate your vector Table in + Internal SRAM. */ +/* #define VECT_TAB_SRAM */ +#define VECT_TAB_OFFSET 0x00000000UL /*!< Vector Table base offset field. + This value must be a multiple of 0x200. */ +/******************************************************************************/ + +/** + * @} + */ + +/** @addtogroup STM32H7xx_System_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32H7xx_System_Private_Variables + * @{ + */ + /* This variable is updated in three ways: + 1) by calling CMSIS function SystemCoreClockUpdate() + 2) by calling HAL API function HAL_RCC_GetHCLKFreq() + 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency + Note: If you use this function to configure the system clock; then there + is no need to call the 2 first functions listed above, since SystemCoreClock + variable is updated automatically. + */ +#ifndef __rtems__ + uint32_t SystemCoreClock = 64000000; + uint32_t SystemD2Clock = 64000000; +#else /* __rtems__ */ + RTEMS_SECTION(".rtemsstack") uint32_t SystemCoreClock; + RTEMS_SECTION(".rtemsstack") uint32_t SystemD2Clock; +#endif /* __rtems__ */ + const uint8_t D1CorePrescTable[16] = {0, 0, 0, 0, 1, 2, 3, 4, 1, 2, 3, 4, 6, 7, 8, 9}; + +/** + * @} + */ + +/** @addtogroup STM32H7xx_System_Private_FunctionPrototypes + * @{ + */ +#ifndef __rtems__ +#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM) + static void SystemInit_ExtMemCtl(void); +#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */ +#endif /* __rtems__ */ + +/** + * @} + */ + +/** @addtogroup STM32H7xx_System_Private_Functions + * @{ + */ + +/** + * @brief Setup the microcontroller system + * Initialize the FPU setting, vector table location and External memory + * configuration. + * @param None + * @retval None + */ +void SystemInit (void) +{ + /* FPU settings ------------------------------------------------------------*/ + #if (__FPU_PRESENT == 1) && (__FPU_USED == 1) + SCB->CPACR |= ((3UL << (10*2))|(3UL << (11*2))); /* set CP10 and CP11 Full Access */ + #endif + + /*SEVONPEND enabled so that an interrupt coming from the CPU(n) interrupt signal is + detectable by the CPU after a WFI/WFE instruction.*/ + SCB->SCR |= SCB_SCR_SEVONPEND_Msk; + +#ifdef CORE_CM7 + /* Reset the RCC clock configuration to the default reset state ------------*/ + /* Set HSION bit */ + RCC->CR |= RCC_CR_HSION; + + /* Reset CFGR register */ + RCC->CFGR = 0x00000000; + + /* Reset HSEON, CSSON , CSION,RC48ON, CSIKERON PLL1ON, PLL2ON and PLL3ON bits */ + RCC->CR &= 0xEAF6ED7FU; + + /* Reset D1CFGR register */ + RCC->D1CFGR = 0x00000000; + + /* Reset D2CFGR register */ + RCC->D2CFGR = 0x00000000; + + /* Reset D3CFGR register */ + RCC->D3CFGR = 0x00000000; + + /* Reset PLLCKSELR register */ + RCC->PLLCKSELR = 0x00000000; + + /* Reset PLLCFGR register */ + RCC->PLLCFGR = 0x00000000; + /* Reset PLL1DIVR register */ + RCC->PLL1DIVR = 0x00000000; + /* Reset PLL1FRACR register */ + RCC->PLL1FRACR = 0x00000000; + + /* Reset PLL2DIVR register */ + RCC->PLL2DIVR = 0x00000000; + + /* Reset PLL2FRACR register */ + + RCC->PLL2FRACR = 0x00000000; + /* Reset PLL3DIVR register */ + RCC->PLL3DIVR = 0x00000000; + + /* Reset PLL3FRACR register */ + RCC->PLL3FRACR = 0x00000000; + + /* Reset HSEBYP bit */ + RCC->CR &= 0xFFFBFFFFU; + + /* Disable all interrupts */ + RCC->CIER = 0x00000000; + + /* Enable CortexM7 HSEM EXTI line (line 78)*/ + EXTI_D2->EMR3 |= 0x4000UL; + + /* Change the switch matrix read issuing capability to 1 for the AXI SRAM target (Target 7) */ + if((DBGMCU->IDCODE & 0xFFFF0000U) < 0x20000000U) + { + /* if stm32h7 revY*/ + /* Change the switch matrix read issuing capability to 1 for the AXI SRAM target (Target 7) */ + *((__IO uint32_t*)0x51008108) = 0x00000001U; + } + + +/* + * Disable the FMC bank1 (enabled after reset). + * This, prevents CPU speculation access on this bank which blocks the use of FMC during + * 24us. During this time the others FMC master (such as LTDC) cannot use it! + */ + FMC_Bank1_R->BTCR[0] = 0x000030D2; + +#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM) + SystemInit_ExtMemCtl(); +#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */ + +#endif /* CORE_CM7*/ + +#ifndef __rtems__ +#ifdef CORE_CM4 + + /* Configure the Vector Table location add offset address ------------------*/ +#ifdef VECT_TAB_SRAM + SCB->VTOR = D2_AXISRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */ +#else + SCB->VTOR = FLASH_BANK2_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */ +#endif + +#else +#ifdef CORE_CM7 + + /* Configure the Vector Table location add offset address ------------------*/ +#ifdef VECT_TAB_SRAM + SCB->VTOR = D1_AXISRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */ +#else + SCB->VTOR = FLASH_BANK1_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */ +#endif + +#else +#error Please #define CORE_CM4 or CORE_CM7 +#endif +#endif + +#else /* __rtems__ */ + SCB->VTOR = (uint32_t) bsp_start_vector_table_begin; +#endif /* __rtems__ */ + +} + +/** + * @brief Update SystemCoreClock variable according to Clock Register Values. + * The SystemCoreClock variable contains the core clock , it can + * be used by the user application to setup the SysTick timer or configure + * other parameters. + * + * @note Each time the core clock changes, this function must be called + * to update SystemCoreClock variable value. Otherwise, any configuration + * based on this variable will be incorrect. + * + * @note - The system frequency computed by this function is not the real + * frequency in the chip. It is calculated based on the predefined + * constant and the selected clock source: + * + * - If SYSCLK source is CSI, SystemCoreClock will contain the CSI_VALUE(*) + * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(**) + * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(***) + * - If SYSCLK source is PLL, SystemCoreClock will contain the CSI_VALUE(*), + * HSI_VALUE(**) or HSE_VALUE(***) multiplied/divided by the PLL factors. + * + * (*) CSI_VALUE is a constant defined in stm32h7xx_hal.h file (default value + * 4 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * (**) HSI_VALUE is a constant defined in stm32h7xx_hal.h file (default value + * 64 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * + * (***)HSE_VALUE is a constant defined in stm32h7xx_hal.h file (default value + * 25 MHz), user has to ensure that HSE_VALUE is same as the real + * frequency of the crystal used. Otherwise, this function may + * have wrong result. + * + * - The result of this function could be not correct when using fractional + * value for HSE crystal. + * @param None + * @retval None + */ +void SystemCoreClockUpdate (void) +{ + uint32_t pllp, pllsource, pllm, pllfracen, hsivalue, tmp; + uint32_t common_system_clock; + float_t fracn1, pllvco; + + /* Get SYSCLK source -------------------------------------------------------*/ + + switch (RCC->CFGR & RCC_CFGR_SWS) + { + case RCC_CFGR_SWS_HSI: /* HSI used as system clock source */ + common_system_clock = (uint32_t) (HSI_VALUE >> ((RCC->CR & RCC_CR_HSIDIV)>> 3)); + break; + + case RCC_CFGR_SWS_CSI: /* CSI used as system clock source */ + common_system_clock = CSI_VALUE; + break; + + case RCC_CFGR_SWS_HSE: /* HSE used as system clock source */ + common_system_clock = HSE_VALUE; + break; + + case RCC_CFGR_SWS_PLL1: /* PLL1 used as system clock source */ + + /* PLL_VCO = (HSE_VALUE or HSI_VALUE or CSI_VALUE/ PLLM) * PLLN + SYSCLK = PLL_VCO / PLLR + */ + pllsource = (RCC->PLLCKSELR & RCC_PLLCKSELR_PLLSRC); + pllm = ((RCC->PLLCKSELR & RCC_PLLCKSELR_DIVM1)>> 4) ; + pllfracen = ((RCC->PLLCFGR & RCC_PLLCFGR_PLL1FRACEN)>>RCC_PLLCFGR_PLL1FRACEN_Pos); + fracn1 = (float_t)(uint32_t)(pllfracen* ((RCC->PLL1FRACR & RCC_PLL1FRACR_FRACN1)>> 3)); + + if (pllm != 0U) + { + switch (pllsource) + { + case RCC_PLLCKSELR_PLLSRC_HSI: /* HSI used as PLL clock source */ + + hsivalue = (HSI_VALUE >> ((RCC->CR & RCC_CR_HSIDIV)>> 3)) ; + pllvco = ( (float_t)hsivalue / (float_t)pllm) * ((float_t)(uint32_t)(RCC->PLL1DIVR & RCC_PLL1DIVR_N1) + (fracn1/(float_t)0x2000) +(float_t)1 ); + + break; + + case RCC_PLLCKSELR_PLLSRC_CSI: /* CSI used as PLL clock source */ + pllvco = ((float_t)CSI_VALUE / (float_t)pllm) * ((float_t)(uint32_t)(RCC->PLL1DIVR & RCC_PLL1DIVR_N1) + (fracn1/(float_t)0x2000) +(float_t)1 ); + break; + + case RCC_PLLCKSELR_PLLSRC_HSE: /* HSE used as PLL clock source */ + pllvco = ((float_t)HSE_VALUE / (float_t)pllm) * ((float_t)(uint32_t)(RCC->PLL1DIVR & RCC_PLL1DIVR_N1) + (fracn1/(float_t)0x2000) +(float_t)1 ); + break; + + default: + pllvco = ((float_t)CSI_VALUE / (float_t)pllm) * ((float_t)(uint32_t)(RCC->PLL1DIVR & RCC_PLL1DIVR_N1) + (fracn1/(float_t)0x2000) +(float_t)1 ); + break; + } + pllp = (((RCC->PLL1DIVR & RCC_PLL1DIVR_P1) >>9) + 1U ) ; + common_system_clock = (uint32_t)(float_t)(pllvco/(float_t)pllp); + } + else + { + common_system_clock = 0U; + } + break; + + default: + common_system_clock = CSI_VALUE; + break; + } + + /* Compute SystemClock frequency --------------------------------------------------*/ + tmp = D1CorePrescTable[(RCC->D1CFGR & RCC_D1CFGR_D1CPRE)>> RCC_D1CFGR_D1CPRE_Pos]; + + /* common_system_clock frequency : CM7 CPU frequency */ + common_system_clock >>= tmp; + + /* SystemD2Clock frequency : CM4 CPU, AXI and AHBs Clock frequency */ + SystemD2Clock = (common_system_clock >> ((D1CorePrescTable[(RCC->D1CFGR & RCC_D1CFGR_HPRE)>> RCC_D1CFGR_HPRE_Pos]) & 0x1FU)); + +#if defined(DUAL_CORE) && defined(CORE_CM4) + SystemCoreClock = SystemD2Clock; +#else + SystemCoreClock = common_system_clock; +#endif /* DUAL_CORE && CORE_CM4 */ +} +#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM) +/** + * @brief Setup the external memory controller. + * Called in startup_stm32h7xx.s before jump to main. + * This function configures the external memories (SRAM/SDRAM) + * This SRAM/SDRAM will be used as program data memory (including heap and stack). + * @param None + * @retval None + */ +void SystemInit_ExtMemCtl(void) +{ + __IO uint32_t tmp = 0; + +#if defined (DATA_IN_ExtSDRAM) && defined (DATA_IN_ExtSRAM) + register uint32_t tmpreg = 0, timeout = 0xFFFF; + register __IO uint32_t index; + + /* Enable GPIOD, GPIOE, GPIOF, GPIOG, GPIOH and GPIOI interface + clock */ + RCC->AHB4ENR |= 0x000001F8; + + /* Delay after an RCC peripheral clock enabling */ + tmp = READ_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOEEN); + + /* Connect PDx pins to FMC Alternate function */ + GPIOD->AFR[0] = 0x00CC00CC; + GPIOD->AFR[1] = 0xCCCCCCCC; + /* Configure PDx pins in Alternate function mode */ + GPIOD->MODER = 0xAAAAFAFA; + /* Configure PDx pins speed to 100 MHz */ + GPIOD->OSPEEDR = 0xFFFF0F0F; + /* Configure PDx pins Output type to push-pull */ + GPIOD->OTYPER = 0x00000000; + /* Configure PDx pins in Pull-up */ + GPIOD->PUPDR = 0x55550505; + + /* Connect PEx pins to FMC Alternate function */ + GPIOE->AFR[0] = 0xC00CC0CC; + GPIOE->AFR[1] = 0xCCCCCCCC; + /* Configure PEx pins in Alternate function mode */ + GPIOE->MODER = 0xAAAABEBA; + /* Configure PEx pins speed to 100 MHz */ + GPIOE->OSPEEDR = 0xFFFFC3CF; + /* Configure PEx pins Output type to push-pull */ + GPIOE->OTYPER = 0x00000000; + /* Configure PEx pins in Pull-up */ + GPIOE->PUPDR = 0x55554145; + + /* Connect PFx pins to FMC Alternate function */ + GPIOF->AFR[0] = 0x00CCCCCC; + GPIOF->AFR[1] = 0xCCCCC000; + /* Configure PFx pins in Alternate function mode */ + GPIOF->MODER = 0xAABFFAAA; + /* Configure PFx pins speed to 100 MHz */ + GPIOF->OSPEEDR = 0xFFC00FFF; + /* Configure PFx pins Output type to push-pull */ + GPIOF->OTYPER = 0x00000000; + /* Configure PFx pins in Pull-up */ + GPIOF->PUPDR = 0x55400555; + + /* Connect PGx pins to FMC Alternate function */ + GPIOG->AFR[0] = 0x00CCCCCC; + GPIOG->AFR[1] = 0xC0000C0C; + /* Configure PGx pins in Alternate function mode */ + GPIOG->MODER = 0xBFEEFAAA; + /* Configure PGx pins speed to 100 MHz */ + GPIOG->OSPEEDR = 0xC0330FFF; + /* Configure PGx pins Output type to push-pull */ + GPIOG->OTYPER = 0x00000000; + /* Configure PGx pins in Pull-up */ + GPIOG->PUPDR = 0x40110555; + + /* Connect PHx pins to FMC Alternate function */ + GPIOH->AFR[0] = 0xCCC00000; + GPIOH->AFR[1] = 0xCCCCCCCC; + /* Configure PHx pins in Alternate function mode */ + GPIOH->MODER = 0xAAAAABFF; + /* Configure PHx pins speed to 100 MHz */ + GPIOH->OSPEEDR = 0xFFFFFC00; + /* Configure PHx pins Output type to push-pull */ + GPIOH->OTYPER = 0x00000000; + /* Configure PHx pins in Pull-up */ + GPIOH->PUPDR = 0x55555400; + + /* Connect PIx pins to FMC Alternate function */ + GPIOI->AFR[0] = 0xCCCCCCCC; + GPIOI->AFR[1] = 0x00000CC0; + /* Configure PIx pins in Alternate function mode */ + GPIOI->MODER = 0xFFEBAAAA; + /* Configure PIx pins speed to 100 MHz */ + GPIOI->OSPEEDR = 0x003CFFFF; + /* Configure PIx pins Output type to push-pull */ + GPIOI->OTYPER = 0x00000000; + /* Configure PIx pins in Pull-up */ + GPIOI->PUPDR = 0x00145555; + + /* Enable the FMC/FSMC interface clock */ + (RCC->AHB3ENR |= (RCC_AHB3ENR_FMCEN)); + + /* Configure and enable Bank1_SRAM2 */ + FMC_Bank1_R->BTCR[4] = 0x00001091; + FMC_Bank1_R->BTCR[5] = 0x00110212; + FMC_Bank1E_R->BWTR[4] = 0x0FFFFFFF; + + /*SDRAM Timing and access interface configuration*/ + /*LoadToActiveDelay = 2 + ExitSelfRefreshDelay = 6 + SelfRefreshTime = 4 + RowCycleDelay = 6 + WriteRecoveryTime = 2 + RPDelay = 2 + RCDDelay = 2 + SDBank = FMC_SDRAM_BANK2 + ColumnBitsNumber = FMC_SDRAM_COLUMN_BITS_NUM_9 + RowBitsNumber = FMC_SDRAM_ROW_BITS_NUM_12 + MemoryDataWidth = FMC_SDRAM_MEM_BUS_WIDTH_32 + InternalBankNumber = FMC_SDRAM_INTERN_BANKS_NUM_4 + CASLatency = FMC_SDRAM_CAS_LATENCY_2 + WriteProtection = FMC_SDRAM_WRITE_PROTECTION_DISABLE + SDClockPeriod = FMC_SDRAM_CLOCK_PERIOD_2 + ReadBurst = FMC_SDRAM_RBURST_ENABLE + ReadPipeDelay = FMC_SDRAM_RPIPE_DELAY_0*/ + + FMC_Bank5_6_R->SDCR[0] = 0x00001800; + FMC_Bank5_6_R->SDCR[1] = 0x00000165; + FMC_Bank5_6_R->SDTR[0] = 0x00105000; + FMC_Bank5_6_R->SDTR[1] = 0x01010351; + + /* SDRAM initialization sequence */ + /* Clock enable command */ + FMC_Bank5_6_R->SDCMR = 0x00000009; + tmpreg = FMC_Bank5_6_R->SDSR & 0x00000020; + while((tmpreg != 0) && (timeout-- > 0)) + { + tmpreg = FMC_Bank5_6_R->SDSR & 0x00000020; + } + + /* Delay */ + for (index = 0; index<1000; index++); + + /* PALL command */ + FMC_Bank5_6_R->SDCMR = 0x0000000A; + timeout = 0xFFFF; + while((tmpreg != 0) && (timeout-- > 0)) + { + tmpreg = FMC_Bank5_6_R->SDSR & 0x00000020; + } + + FMC_Bank5_6_R->SDCMR = 0x000000EB; + timeout = 0xFFFF; + while((tmpreg != 0) && (timeout-- > 0)) + { + tmpreg = FMC_Bank5_6_R->SDSR & 0x00000020; + } + + FMC_Bank5_6_R->SDCMR = 0x0004400C; + timeout = 0xFFFF; + while((tmpreg != 0) && (timeout-- > 0)) + { + tmpreg = FMC_Bank5_6_R->SDSR & 0x00000020; + } + /* Set refresh count */ + tmpreg = FMC_Bank5_6_R->SDRTR; + FMC_Bank5_6_R->SDRTR = (tmpreg | (0x00000603<<1)); + + /* Disable write protection */ + tmpreg = FMC_Bank5_6_R->SDCR[1]; + FMC_Bank5_6_R->SDCR[1] = (tmpreg & 0xFFFFFDFF); + + /*FMC controller Enable*/ + FMC_Bank1_R->BTCR[0] |= 0x80000000; + +#elif defined (DATA_IN_ExtSDRAM) + register uint32_t tmpreg = 0, timeout = 0xFFFF; + register __IO uint32_t index; + + /* Enable GPIOD, GPIOE, GPIOF, GPIOG, GPIOH and GPIOI interface + clock */ + RCC->AHB4ENR |= 0x000001F8; + + /* Connect PDx pins to FMC Alternate function */ + GPIOD->AFR[0] = 0x000000CC; + GPIOD->AFR[1] = 0xCC000CCC; + /* Configure PDx pins in Alternate function mode */ + GPIOD->MODER = 0xAFEAFFFA; + /* Configure PDx pins speed to 100 MHz */ + GPIOD->OSPEEDR = 0xF03F000F; + /* Configure PDx pins Output type to push-pull */ + GPIOD->OTYPER = 0x00000000; + /* Configure PDx pins in Pull-up */ + GPIOD->PUPDR = 0x50150005; + + /* Connect PEx pins to FMC Alternate function */ + GPIOE->AFR[0] = 0xC00000CC; + GPIOE->AFR[1] = 0xCCCCCCCC; + /* Configure PEx pins in Alternate function mode */ + GPIOE->MODER = 0xAAAABFFA; + /* Configure PEx pins speed to 100 MHz */ + GPIOE->OSPEEDR = 0xFFFFC00F; + /* Configure PEx pins Output type to push-pull */ + GPIOE->OTYPER = 0x00000000; + /* Configure PEx pins in Pull-up */ + GPIOE->PUPDR = 0x55554005; + + /* Connect PFx pins to FMC Alternate function */ + GPIOF->AFR[0] = 0x00CCCCCC; + GPIOF->AFR[1] = 0xCCCCC000; + /* Configure PFx pins in Alternate function mode */ + GPIOF->MODER = 0xAABFFAAA; + /* Configure PFx pins speed to 100 MHz */ + GPIOF->OSPEEDR = 0xFFC00FFF; + /* Configure PFx pins Output type to push-pull */ + GPIOF->OTYPER = 0x00000000; + /* Configure PFx pins in Pull-up */ + GPIOF->PUPDR = 0x55400555; + + /* Connect PGx pins to FMC Alternate function */ + GPIOG->AFR[0] = 0x00CCCCCC; + GPIOG->AFR[1] = 0xC000000C; + /* Configure PGx pins in Alternate function mode */ + GPIOG->MODER = 0xBFFEFAAA; + /* Configure PGx pins speed to 100 MHz */ + GPIOG->OSPEEDR = 0xC0030FFF; + /* Configure PGx pins Output type to push-pull */ + GPIOG->OTYPER = 0x00000000; + /* Configure PGx pins in Pull-up */ + GPIOG->PUPDR = 0x40010555; + + /* Connect PHx pins to FMC Alternate function */ + GPIOH->AFR[0] = 0xCCC00000; + GPIOH->AFR[1] = 0xCCCCCCCC; + /* Configure PHx pins in Alternate function mode */ + GPIOH->MODER = 0xAAAAABFF; + /* Configure PHx pins speed to 100 MHz */ + GPIOH->OSPEEDR = 0xFFFFFC00; + /* Configure PHx pins Output type to push-pull */ + GPIOH->OTYPER = 0x00000000; + /* Configure PHx pins in Pull-up */ + GPIOH->PUPDR = 0x55555400; + + /* Connect PIx pins to FMC Alternate function */ + GPIOI->AFR[0] = 0xCCCCCCCC; + GPIOI->AFR[1] = 0x00000CC0; + /* Configure PIx pins in Alternate function mode */ + GPIOI->MODER = 0xFFEBAAAA; + /* Configure PIx pins speed to 100 MHz */ + GPIOI->OSPEEDR = 0x003CFFFF; + /* Configure PIx pins Output type to push-pull */ + GPIOI->OTYPER = 0x00000000; + /* Configure PIx pins in Pull-up */ + GPIOI->PUPDR = 0x00145555; + +/*-- FMC Configuration ------------------------------------------------------*/ + /* Enable the FMC interface clock */ + (RCC->AHB3ENR |= (RCC_AHB3ENR_FMCEN)); + /*SDRAM Timing and access interface configuration*/ + /*LoadToActiveDelay = 2 + ExitSelfRefreshDelay = 6 + SelfRefreshTime = 4 + RowCycleDelay = 6 + WriteRecoveryTime = 2 + RPDelay = 2 + RCDDelay = 2 + SDBank = FMC_SDRAM_BANK2 + ColumnBitsNumber = FMC_SDRAM_COLUMN_BITS_NUM_9 + RowBitsNumber = FMC_SDRAM_ROW_BITS_NUM_12 + MemoryDataWidth = FMC_SDRAM_MEM_BUS_WIDTH_32 + InternalBankNumber = FMC_SDRAM_INTERN_BANKS_NUM_4 + CASLatency = FMC_SDRAM_CAS_LATENCY_2 + WriteProtection = FMC_SDRAM_WRITE_PROTECTION_DISABLE + SDClockPeriod = FMC_SDRAM_CLOCK_PERIOD_2 + ReadBurst = FMC_SDRAM_RBURST_ENABLE + ReadPipeDelay = FMC_SDRAM_RPIPE_DELAY_0*/ + + FMC_Bank5_6_R->SDCR[0] = 0x00001800; + FMC_Bank5_6_R->SDCR[1] = 0x00000165; + FMC_Bank5_6_R->SDTR[0] = 0x00105000; + FMC_Bank5_6_R->SDTR[1] = 0x01010351; + + /* SDRAM initialization sequence */ + /* Clock enable command */ + FMC_Bank5_6_R->SDCMR = 0x00000009; + tmpreg = FMC_Bank5_6_R->SDSR & 0x00000020; + while((tmpreg != 0) && (timeout-- > 0)) + { + tmpreg = FMC_Bank5_6_R->SDSR & 0x00000020; + } + + /* Delay */ + for (index = 0; index<1000; index++); + + /* PALL command */ + FMC_Bank5_6_R->SDCMR = 0x0000000A; + timeout = 0xFFFF; + while((tmpreg != 0) && (timeout-- > 0)) + { + tmpreg = FMC_Bank5_6_R->SDSR & 0x00000020; + } + + FMC_Bank5_6_R->SDCMR = 0x000000EB; + timeout = 0xFFFF; + while((tmpreg != 0) && (timeout-- > 0)) + { + tmpreg = FMC_Bank5_6_R->SDSR & 0x00000020; + } + + FMC_Bank5_6_R->SDCMR = 0x0004400C; + timeout = 0xFFFF; + while((tmpreg != 0) && (timeout-- > 0)) + { + tmpreg = FMC_Bank5_6_R->SDSR & 0x00000020; + } + /* Set refresh count */ + tmpreg = FMC_Bank5_6_R->SDRTR; + FMC_Bank5_6_R->SDRTR = (tmpreg | (0x00000603<<1)); + + /* Disable write protection */ + tmpreg = FMC_Bank5_6_R->SDCR[1]; + FMC_Bank5_6_R->SDCR[1] = (tmpreg & 0xFFFFFDFF); + + /*FMC controller Enable*/ + FMC_Bank1_R->BTCR[0] |= 0x80000000; + +#elif defined(DATA_IN_ExtSRAM) +/*-- GPIOs Configuration -----------------------------------------------------*/ + /* Enable GPIOD, GPIOE, GPIOF and GPIOG interface clock */ + RCC->AHB4ENR |= 0x00000078; + + /* Connect PDx pins to FMC Alternate function */ + GPIOD->AFR[0] = 0x00CC00CC; + GPIOD->AFR[1] = 0xCCCCCCCC; + /* Configure PDx pins in Alternate function mode */ + GPIOD->MODER = 0xAAAAFABA; + /* Configure PDx pins speed to 100 MHz */ + GPIOD->OSPEEDR = 0xFFFF0F0F; + /* Configure PDx pins Output type to push-pull */ + GPIOD->OTYPER = 0x00000000; + /* Configure PDx pins in Pull-up */ + GPIOD->PUPDR = 0x55550505; + + /* Connect PEx pins to FMC Alternate function */ + GPIOE->AFR[0] = 0xC00CC0CC; + GPIOE->AFR[1] = 0xCCCCCCCC; + /* Configure PEx pins in Alternate function mode */ + GPIOE->MODER = 0xAAAABEBA; + /* Configure PEx pins speed to 100 MHz */ + GPIOE->OSPEEDR = 0xFFFFC3CF; + /* Configure PEx pins Output type to push-pull */ + GPIOE->OTYPER = 0x00000000; + /* Configure PEx pins in Pull-up */ + GPIOE->PUPDR = 0x55554145; + + /* Connect PFx pins to FMC Alternate function */ + GPIOF->AFR[0] = 0x00CCCCCC; + GPIOF->AFR[1] = 0xCCCC0000; + /* Configure PFx pins in Alternate function mode */ + GPIOF->MODER = 0xAAFFFAAA; + /* Configure PFx pins speed to 100 MHz */ + GPIOF->OSPEEDR = 0xFF000FFF; + /* Configure PFx pins Output type to push-pull */ + GPIOF->OTYPER = 0x00000000; + /* Configure PFx pins in Pull-up */ + GPIOF->PUPDR = 0x55000555; + + /* Connect PGx pins to FMC Alternate function */ + GPIOG->AFR[0] = 0x00CCCCCC; + GPIOG->AFR[1] = 0x00000C00; + /* Configure PGx pins in Alternate function mode */ + GPIOG->MODER = 0xFFEFFAAA; + /* Configure PGx pins speed to 100 MHz */ + GPIOG->OSPEEDR = 0x00300FFF; + /* Configure PGx pins Output type to push-pull */ + GPIOG->OTYPER = 0x00000000; + /* Configure PGx pins in Pull-up */ + GPIOG->PUPDR = 0x00100555; + +/*-- FMC/FSMC Configuration --------------------------------------------------*/ + /* Enable the FMC/FSMC interface clock */ + (RCC->AHB3ENR |= (RCC_AHB3ENR_FMCEN)); + + /* Configure and enable Bank1_SRAM2 */ + FMC_Bank1_R->BTCR[4] = 0x00001091; + FMC_Bank1_R->BTCR[5] = 0x00110212; + FMC_Bank1E_R->BWTR[4] = 0x0FFFFFFF; + + /*FMC controller Enable*/ + FMC_Bank1_R->BTCR[0] |= 0x80000000; + +#endif /* DATA_IN_ExtSRAM */ + + (void)(tmp); +} +#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */ + + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ |