diff options
Diffstat (limited to '')
-rw-r--r-- | bsps/arm/raspberrypi/clock/clockdrv.c | 107 |
1 files changed, 0 insertions, 107 deletions
diff --git a/bsps/arm/raspberrypi/clock/clockdrv.c b/bsps/arm/raspberrypi/clock/clockdrv.c deleted file mode 100644 index 9954d41741..0000000000 --- a/bsps/arm/raspberrypi/clock/clockdrv.c +++ /dev/null @@ -1,107 +0,0 @@ -/** - * @file - * - * @ingroup bsp_clock - * - * @brief Raspberry Pi clock support. - */ - -/* - * BCM2835 Clock driver - * - * Copyright (c) 2013 Alan Cudmore - * Copyright (c) 2016 Pavel Pisa - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * - * http://www.rtems.org/license/LICENSE - * -*/ - -#include <rtems.h> -#include <bsp.h> -#include <bsp/irq.h> -#include <bsp/irq-generic.h> -#include <bsp/raspberrypi.h> -#include <rtems/timecounter.h> - -/* This is defined in ../../../shared/dev/clock/clockimpl.h */ -void Clock_isr(rtems_irq_hdl_param arg); - -static struct timecounter raspberrypi_tc; - -static uint32_t raspberrypi_clock_get_timecount(struct timecounter *tc) -{ - return BCM2835_REG(BCM2835_GPU_TIMER_CLO); -} - -static void raspberrypi_clock_at_tick(void) -{ - uint32_t act_val; - uint32_t next_cmp = BCM2835_REG(BCM2835_GPU_TIMER_C3); - next_cmp += rtems_configuration_get_microseconds_per_tick(); - BCM2835_REG(BCM2835_GPU_TIMER_C3) = next_cmp; - act_val = BCM2835_REG(BCM2835_GPU_TIMER_CLO); - - /* - * Clear interrupt only if there is time left to the next tick. - * If time of the next tick has already passed then interrupt - * request stays active and fires immediately after current tick - * processing is finished. - */ - if ((int32_t)(next_cmp - act_val) > 0) - BCM2835_REG(BCM2835_GPU_TIMER_CS) = BCM2835_GPU_TIMER_CS_M3; -} - -static void raspberrypi_clock_handler_install_isr( - rtems_isr_entry clock_isr -) -{ - rtems_status_code sc = RTEMS_SUCCESSFUL; - - if (clock_isr != NULL) { - sc = rtems_interrupt_handler_install( - BCM2835_IRQ_ID_GPU_TIMER_M3, - "Clock", - RTEMS_INTERRUPT_UNIQUE, - (rtems_interrupt_handler) clock_isr, - NULL - ); - } else { - /* Remove interrupt handler */ - sc = rtems_interrupt_handler_remove( - BCM2835_IRQ_ID_GPU_TIMER_M3, - (rtems_interrupt_handler) Clock_isr, - NULL - ); - } - if ( sc != RTEMS_SUCCESSFUL ) { - rtems_fatal_error_occurred(0xdeadbeef); - } -} - -static void raspberrypi_clock_initialize_hardware(void) -{ - uint32_t next_cmp = BCM2835_REG(BCM2835_GPU_TIMER_CLO); - next_cmp += rtems_configuration_get_microseconds_per_tick(); - BCM2835_REG(BCM2835_GPU_TIMER_C3) = next_cmp; - BCM2835_REG(BCM2835_GPU_TIMER_CS) = BCM2835_GPU_TIMER_CS_M3; - - raspberrypi_tc.tc_get_timecount = raspberrypi_clock_get_timecount; - raspberrypi_tc.tc_counter_mask = 0xffffffff; - raspberrypi_tc.tc_frequency = 1000000; /* 1 MHz */ - raspberrypi_tc.tc_quality = RTEMS_TIMECOUNTER_QUALITY_CLOCK_DRIVER; - rtems_timecounter_install(&raspberrypi_tc); -} - -#define Clock_driver_support_at_tick() raspberrypi_clock_at_tick() - -#define Clock_driver_support_initialize_hardware() raspberrypi_clock_initialize_hardware() - -#define Clock_driver_support_install_isr(clock_isr) \ - raspberrypi_clock_handler_install_isr(clock_isr) - -#define CLOCK_DRIVER_USE_ONLY_BOOT_PROCESSOR 1 - -#include "../../../shared/dev/clock/clockimpl.h" |