diff options
Diffstat (limited to '')
-rw-r--r-- | bsps/arm/imxrt/nxp/devices/MIMXRT1052/drivers/fsl_usdhc.c | 2126 |
1 files changed, 2126 insertions, 0 deletions
diff --git a/bsps/arm/imxrt/nxp/devices/MIMXRT1052/drivers/fsl_usdhc.c b/bsps/arm/imxrt/nxp/devices/MIMXRT1052/drivers/fsl_usdhc.c new file mode 100644 index 0000000000..8dd37e6345 --- /dev/null +++ b/bsps/arm/imxrt/nxp/devices/MIMXRT1052/drivers/fsl_usdhc.c @@ -0,0 +1,2126 @@ +/* + * Copyright (c) 2016, Freescale Semiconductor, Inc. + * Copyright 2016-2020 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#include "fsl_usdhc.h" +#if defined(FSL_SDK_ENABLE_DRIVER_CACHE_CONTROL) && FSL_SDK_ENABLE_DRIVER_CACHE_CONTROL +#include "fsl_cache.h" +#endif /* FSL_SDK_ENABLE_DRIVER_CACHE_CONTROL */ + +/******************************************************************************* + * Definitions + ******************************************************************************/ + +/* Component ID definition, used by tools. */ +#ifndef FSL_COMPONENT_ID +#define FSL_COMPONENT_ID "platform.drivers.usdhc" +#endif + +/*! @brief Clock setting */ +/* Max SD clock divisor from base clock */ +#define USDHC_MAX_DVS ((USDHC_SYS_CTRL_DVS_MASK >> USDHC_SYS_CTRL_DVS_SHIFT) + 1U) +#define USDHC_MAX_CLKFS ((USDHC_SYS_CTRL_SDCLKFS_MASK >> USDHC_SYS_CTRL_SDCLKFS_SHIFT) + 1U) +#define USDHC_PREV_DVS(x) ((x) -= 1U) +#define USDHC_PREV_CLKFS(x, y) ((x) >>= (y)) +/*! @brief USDHC ADMA table address align size */ +#define USDHC_ADMA_TABLE_ADDRESS_ALIGN (4U) + +/* Typedef for interrupt handler. */ +typedef void (*usdhc_isr_t)(USDHC_Type *base, usdhc_handle_t *handle); +/*! @brief check flag avalibility */ +#define IS_USDHC_FLAG_SET(reg, flag) (((reg) & ((uint32_t)flag)) != 0UL) + +/******************************************************************************* + * Prototypes + ******************************************************************************/ +/*! + * @brief Get the instance. + * + * @param base USDHC peripheral base address. + * @return Instance number. + */ +static uint32_t USDHC_GetInstance(USDHC_Type *base); + +/*! + * @brief Start transfer according to current transfer state + * + * @param base USDHC peripheral base address. + * @param data Data to be transferred. + * @param flag data present flag + * @param enDMA DMA enable flag + */ +static status_t USDHC_SetDataTransferConfig(USDHC_Type *base, + usdhc_data_t *data, + uint32_t *dataPresentFlag, + bool enDMA); + +/*! + * @brief Receive command response + * + * @param base USDHC peripheral base address. + * @param command Command to be sent. + */ +static status_t USDHC_ReceiveCommandResponse(USDHC_Type *base, usdhc_command_t *command); + +/*! + * @brief Read DATAPORT when buffer enable bit is set. + * + * @param base USDHC peripheral base address. + * @param data Data to be read. + * @param transferredWords The number of data words have been transferred last time transaction. + * @return The number of total data words have been transferred after this time transaction. + */ +static uint32_t USDHC_ReadDataPort(USDHC_Type *base, usdhc_data_t *data, uint32_t transferredWords); + +/*! + * @brief Read data by using DATAPORT polling way. + * + * @param base USDHC peripheral base address. + * @param data Data to be read. + * @retval kStatus_Fail Read DATAPORT failed. + * @retval kStatus_Success Operate successfully. + */ +static status_t USDHC_ReadByDataPortBlocking(USDHC_Type *base, usdhc_data_t *data); + +/*! + * @brief Write DATAPORT when buffer enable bit is set. + * + * @param base USDHC peripheral base address. + * @param data Data to be read. + * @param transferredWords The number of data words have been transferred last time. + * @return The number of total data words have been transferred after this time transaction. + */ +static uint32_t USDHC_WriteDataPort(USDHC_Type *base, usdhc_data_t *data, uint32_t transferredWords); + +/*! + * @brief Write data by using DATAPORT polling way. + * + * @param base USDHC peripheral base address. + * @param data Data to be transferred. + * @retval kStatus_Fail Write DATAPORT failed. + * @retval kStatus_Success Operate successfully. + */ +static status_t USDHC_WriteByDataPortBlocking(USDHC_Type *base, usdhc_data_t *data); + +/*! + * @brief Transfer data by polling way. + * + * @param base USDHC peripheral base address. + * @param data Data to be transferred. + * @param use DMA flag. + * @retval kStatus_Fail Transfer data failed. + * @retval kStatus_InvalidArgument Argument is invalid. + * @retval kStatus_Success Operate successfully. + */ +static status_t USDHC_TransferDataBlocking(USDHC_Type *base, usdhc_data_t *data, bool enDMA); + +/*! + * @brief Handle card detect interrupt. + * + * @param base USDHC peripheral base address. + * @param handle USDHC handle. + * @param interruptFlags Card detect related interrupt flags. + */ +static void USDHC_TransferHandleCardDetect(USDHC_Type *base, usdhc_handle_t *handle, uint32_t interruptFlags); + +/*! + * @brief Handle command interrupt. + * + * @param base USDHC peripheral base address. + * @param handle USDHC handle. + * @param interruptFlags Command related interrupt flags. + */ +static void USDHC_TransferHandleCommand(USDHC_Type *base, usdhc_handle_t *handle, uint32_t interruptFlags); + +/*! + * @brief Handle data interrupt. + * + * @param base USDHC peripheral base address. + * @param handle USDHC handle. + * @param interruptFlags Data related interrupt flags. + */ +static void USDHC_TransferHandleData(USDHC_Type *base, usdhc_handle_t *handle, uint32_t interruptFlags); + +/*! + * @brief Handle SDIO card interrupt signal. + * + * @param base USDHC peripheral base address. + * @param handle USDHC handle. + */ +static void USDHC_TransferHandleSdioInterrupt(USDHC_Type *base, usdhc_handle_t *handle); + +/*! + * @brief Handle SDIO block gap event. + * + * @param base USDHC peripheral base address. + * @param handle USDHC handle. + */ +static void USDHC_TransferHandleBlockGap(USDHC_Type *base, usdhc_handle_t *handle); + +#if defined(FSL_FEATURE_USDHC_HAS_SDR50_MODE) && (FSL_FEATURE_USDHC_HAS_SDR50_MODE) +/*! + * @brief Handle retuning + * + * @param base USDHC peripheral base address. + * @param handle USDHC handle. + * @param interrupt flags + */ +static void USDHC_TransferHandleReTuning(USDHC_Type *base, usdhc_handle_t *handle, uint32_t interruptFlags); +#endif + +/*! + * @brief wait command done + * + * @param base USDHC peripheral base address. + * @param command configuration + * @param pollingCmdDone polling command done flag + */ +static status_t USDHC_WaitCommandDone(USDHC_Type *base, usdhc_command_t *command, bool pollingCmdDone); + +/******************************************************************************* + * Variables + ******************************************************************************/ +/*! @brief USDHC base pointer array */ +static USDHC_Type *const s_usdhcBase[] = USDHC_BASE_PTRS; + +/*! @brief USDHC internal handle pointer array */ +static usdhc_handle_t *s_usdhcHandle[ARRAY_SIZE(s_usdhcBase)] = {NULL}; + +/*! @brief USDHC IRQ name array */ +static const IRQn_Type s_usdhcIRQ[] = USDHC_IRQS; + +#if !(defined(FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL) && FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL) +/*! @brief USDHC clock array name */ +static const clock_ip_name_t s_usdhcClock[] = USDHC_CLOCKS; +#endif /* FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL */ + +#if (defined(FSL_FEATURE_USDHC_HAS_RESET) && FSL_FEATURE_USDHC_HAS_RESET) +/*! @brief Pointers to USDHC resets for each instance. */ +static const reset_ip_name_t s_usdhcResets[] = USDHC_RSTS; +#endif + +/* USDHC ISR for transactional APIs. */ +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) +static usdhc_isr_t s_usdhcIsr = (usdhc_isr_t)DefaultISR; +#else +static usdhc_isr_t s_usdhcIsr; +#endif +/*! @brief Dummy data buffer for mmc boot mode */ +AT_NONCACHEABLE_SECTION_ALIGN(uint32_t s_usdhcBootDummy, USDHC_ADMA2_ADDRESS_ALIGN); + +/******************************************************************************* + * Code + ******************************************************************************/ +static uint32_t USDHC_GetInstance(USDHC_Type *base) +{ + uint8_t instance = 0; + + while ((instance < ARRAY_SIZE(s_usdhcBase)) && (s_usdhcBase[instance] != base)) + { + instance++; + } + + assert(instance < ARRAY_SIZE(s_usdhcBase)); + + return instance; +} + +static status_t USDHC_SetDataTransferConfig(USDHC_Type *base, usdhc_data_t *data, uint32_t *dataPresentFlag, bool enDMA) +{ + uint32_t mixCtrl = base->MIX_CTRL; + + if (data != NULL) + { + /* if transfer boot continous, only need set the CREQ bit, leave others as it is */ + if (data->dataType == (uint32_t)kUSDHC_TransferDataBootcontinous) + { + /* clear stop at block gap request */ + base->PROT_CTRL &= ~USDHC_PROT_CTRL_SABGREQ_MASK; + /* continous transfer data */ + base->PROT_CTRL |= USDHC_PROT_CTRL_CREQ_MASK; + return kStatus_Success; + } + + /* check data inhibit flag */ + if (IS_USDHC_FLAG_SET(base->PRES_STATE, kUSDHC_DataInhibitFlag)) + { + return kStatus_USDHC_BusyTransferring; + } + /* check transfer block count */ + if ((data->blockCount > USDHC_MAX_BLOCK_COUNT) || ((data->txData == NULL) && (data->rxData == NULL))) + { + return kStatus_InvalidArgument; + } + + /* config mix parameter */ + mixCtrl &= ~(USDHC_MIX_CTRL_MSBSEL_MASK | USDHC_MIX_CTRL_BCEN_MASK | USDHC_MIX_CTRL_DTDSEL_MASK | + USDHC_MIX_CTRL_AC12EN_MASK); + + if (data->rxData != NULL) + { + mixCtrl |= USDHC_MIX_CTRL_DTDSEL_MASK; + } + + if (data->blockCount > 1U) + { + mixCtrl |= USDHC_MIX_CTRL_MSBSEL_MASK | USDHC_MIX_CTRL_BCEN_MASK; + /* auto command 12 */ + if (data->enableAutoCommand12) + { + mixCtrl |= USDHC_MIX_CTRL_AC12EN_MASK; + } + } + + /* auto command 23, auto send set block count cmd before multiple read/write */ + if ((data->enableAutoCommand23)) + { + mixCtrl |= USDHC_MIX_CTRL_AC23EN_MASK; + base->VEND_SPEC2 |= USDHC_VEND_SPEC2_ACMD23_ARGU2_EN_MASK; + /* config the block count to DS_ADDR */ + base->DS_ADDR = data->blockCount; + } + else + { + mixCtrl &= ~USDHC_MIX_CTRL_AC23EN_MASK; + base->VEND_SPEC2 &= ~USDHC_VEND_SPEC2_ACMD23_ARGU2_EN_MASK; + } + + /* if transfer boot data, leave the block count to USDHC_SetMmcBootConfig function */ + if (data->dataType != (uint32_t)kUSDHC_TransferDataBoot) + { + /* config data block size/block count */ + base->BLK_ATT = ((base->BLK_ATT & ~(USDHC_BLK_ATT_BLKSIZE_MASK | USDHC_BLK_ATT_BLKCNT_MASK)) | + (USDHC_BLK_ATT_BLKSIZE(data->blockSize) | USDHC_BLK_ATT_BLKCNT(data->blockCount))); + } + else + { + mixCtrl |= USDHC_MIX_CTRL_MSBSEL_MASK | USDHC_MIX_CTRL_BCEN_MASK; + base->PROT_CTRL |= USDHC_PROT_CTRL_RD_DONE_NO_8CLK_MASK; + } + + /* data present flag */ + *dataPresentFlag |= (uint32_t)kUSDHC_DataPresentFlag; + } + else + { + /* clear data flags */ + mixCtrl &= ~(USDHC_MIX_CTRL_MSBSEL_MASK | USDHC_MIX_CTRL_BCEN_MASK | USDHC_MIX_CTRL_DTDSEL_MASK | + USDHC_MIX_CTRL_AC12EN_MASK | USDHC_MIX_CTRL_AC23EN_MASK); + + if (IS_USDHC_FLAG_SET(base->PRES_STATE, kUSDHC_CommandInhibitFlag)) + { + return kStatus_USDHC_BusyTransferring; + } + } + + /* config the mix parameter */ + base->MIX_CTRL = mixCtrl; + + return kStatus_Success; +} + +void USDHC_SetDataConfig(USDHC_Type *base, + usdhc_transfer_direction_t dataDirection, + uint32_t blockCount, + uint32_t blockSize) +{ + assert(blockCount <= USDHC_MAX_BLOCK_COUNT); + + uint32_t mixCtrl = base->MIX_CTRL; + + /* block attribute configuration */ + base->BLK_ATT = ((base->BLK_ATT & ~(USDHC_BLK_ATT_BLKSIZE_MASK | USDHC_BLK_ATT_BLKCNT_MASK)) | + (USDHC_BLK_ATT_BLKSIZE(blockSize) | USDHC_BLK_ATT_BLKCNT(blockCount))); + + /* config mix parameter */ + mixCtrl &= ~(USDHC_MIX_CTRL_MSBSEL_MASK | USDHC_MIX_CTRL_BCEN_MASK | USDHC_MIX_CTRL_DTDSEL_MASK); + + mixCtrl |= USDHC_MIX_CTRL_DTDSEL(dataDirection) | (blockCount > 1U ? USDHC_MIX_CTRL_MSBSEL_MASK : 0U); + + base->MIX_CTRL = mixCtrl; +} + +static status_t USDHC_ReceiveCommandResponse(USDHC_Type *base, usdhc_command_t *command) +{ + assert(command != NULL); + + uint32_t response0 = base->CMD_RSP0; + uint32_t response1 = base->CMD_RSP1; + uint32_t response2 = base->CMD_RSP2; + + if (command->responseType != kCARD_ResponseTypeNone) + { + command->response[0U] = response0; + if (command->responseType == kCARD_ResponseTypeR2) + { + /* R3-R2-R1-R0(lowest 8 bit is invalid bit) has the same format as R2 format in SD specification document + after removed internal CRC7 and end bit. */ + command->response[0U] <<= 8U; + command->response[1U] = (response1 << 8U) | ((response0 & 0xFF000000U) >> 24U); + command->response[2U] = (response2 << 8U) | ((response1 & 0xFF000000U) >> 24U); + command->response[3U] = (base->CMD_RSP3 << 8U) | ((response2 & 0xFF000000U) >> 24U); + } + } + + /* check response error flag */ + if ((command->responseErrorFlags != 0U) && + ((command->responseType == kCARD_ResponseTypeR1) || (command->responseType == kCARD_ResponseTypeR1b) || + (command->responseType == kCARD_ResponseTypeR6) || (command->responseType == kCARD_ResponseTypeR5))) + { + if (((command->responseErrorFlags) & (command->response[0U])) != 0U) + { + return kStatus_USDHC_SendCommandFailed; + } + } + + return kStatus_Success; +} + +static uint32_t USDHC_ReadDataPort(USDHC_Type *base, usdhc_data_t *data, uint32_t transferredWords) +{ + uint32_t i; + uint32_t totalWords; + uint32_t wordsCanBeRead; /* The words can be read at this time. */ + uint32_t readWatermark = ((base->WTMK_LVL & USDHC_WTMK_LVL_RD_WML_MASK) >> USDHC_WTMK_LVL_RD_WML_SHIFT); + + /* If DMA is enable, do not need to polling data port */ + if ((base->MIX_CTRL & USDHC_MIX_CTRL_DMAEN_MASK) == 0U) + { + /* + * Add non aligned access support ,user need make sure your buffer size is big + * enough to hold the data,in other words,user need make sure the buffer size + * is 4 byte aligned + */ + if (data->blockSize % sizeof(uint32_t) != 0U) + { + data->blockSize += + sizeof(uint32_t) - (data->blockSize % sizeof(uint32_t)); /* make the block size as word-aligned */ + } + + totalWords = ((data->blockCount * data->blockSize) / sizeof(uint32_t)); + + /* If watermark level is equal or bigger than totalWords, transfers totalWords data. */ + if (readWatermark >= totalWords) + { + wordsCanBeRead = totalWords; + } + /* If watermark level is less than totalWords and left words to be sent is equal or bigger than readWatermark, + transfers watermark level words. */ + else if ((readWatermark < totalWords) && ((totalWords - transferredWords) >= readWatermark)) + { + wordsCanBeRead = readWatermark; + } + /* If watermark level is less than totalWords and left words to be sent is less than readWatermark, transfers + left + words. */ + else + { + wordsCanBeRead = (totalWords - transferredWords); + } + + i = 0U; + while (i < wordsCanBeRead) + { + data->rxData[transferredWords++] = USDHC_ReadData(base); + i++; + } + } + + return transferredWords; +} + +static status_t USDHC_ReadByDataPortBlocking(USDHC_Type *base, usdhc_data_t *data) +{ + uint32_t totalWords; + uint32_t transferredWords = 0U, interruptStatus = 0U; + status_t error = kStatus_Success; + + /* + * Add non aligned access support ,user need make sure your buffer size is big + * enough to hold the data,in other words,user need make sure the buffer size + * is 4 byte aligned + */ + if (data->blockSize % sizeof(uint32_t) != 0U) + { + data->blockSize += + sizeof(uint32_t) - (data->blockSize % sizeof(uint32_t)); /* make the block size as word-aligned */ + } + + totalWords = ((data->blockCount * data->blockSize) / sizeof(uint32_t)); + + while ((error == kStatus_Success) && (transferredWords < totalWords)) + { + while ( + !(IS_USDHC_FLAG_SET(interruptStatus, ((uint32_t)kUSDHC_BufferReadReadyFlag | + (uint32_t)kUSDHC_DataErrorFlag | (uint32_t)kUSDHC_TuningErrorFlag)))) + { + interruptStatus = USDHC_GetInterruptStatusFlags(base); + } + + /* during std tuning process, software do not need to read data, but wait BRR is enough */ + if ((data->dataType == (uint32_t)kUSDHC_TransferDataTuning) && + (IS_USDHC_FLAG_SET(interruptStatus, kUSDHC_BufferReadReadyFlag))) + { + USDHC_ClearInterruptStatusFlags(base, + (uint32_t)kUSDHC_BufferReadReadyFlag | (uint32_t)kUSDHC_TuningPassFlag); + + return kStatus_Success; + } +#if defined(FSL_FEATURE_USDHC_HAS_SDR50_MODE) && (FSL_FEATURE_USDHC_HAS_SDR50_MODE) + else if (IS_USDHC_FLAG_SET(interruptStatus, kUSDHC_TuningErrorFlag)) + { + USDHC_ClearInterruptStatusFlags(base, kUSDHC_TuningErrorFlag); + /* if tuning error occur ,return directly */ + error = kStatus_USDHC_TuningError; + } +#endif + else if (IS_USDHC_FLAG_SET(interruptStatus, kUSDHC_DataErrorFlag)) + { + if (!(data->enableIgnoreError)) + { + error = kStatus_Fail; + } + /* clear data error flag */ + USDHC_ClearInterruptStatusFlags(base, kUSDHC_DataErrorFlag); + } + else + { + /* Intentional empty */ + } + + if (error == kStatus_Success) + { + transferredWords = USDHC_ReadDataPort(base, data, transferredWords); + /* clear buffer read ready */ + USDHC_ClearInterruptStatusFlags(base, kUSDHC_BufferReadReadyFlag); + interruptStatus = 0U; + } + } + + /* Clear data complete flag after the last read operation. */ + USDHC_ClearInterruptStatusFlags(base, kUSDHC_DataCompleteFlag); + + return error; +} + +static uint32_t USDHC_WriteDataPort(USDHC_Type *base, usdhc_data_t *data, uint32_t transferredWords) +{ + uint32_t i; + uint32_t totalWords; + uint32_t wordsCanBeWrote; /* Words can be wrote at this time. */ + uint32_t writeWatermark = ((base->WTMK_LVL & USDHC_WTMK_LVL_WR_WML_MASK) >> USDHC_WTMK_LVL_WR_WML_SHIFT); + + /* If DMA is enable, do not need to polling data port */ + if ((base->MIX_CTRL & USDHC_MIX_CTRL_DMAEN_MASK) == 0U) + { + /* + * Add non aligned access support ,user need make sure your buffer size is big + * enough to hold the data,in other words,user need make sure the buffer size + * is 4 byte aligned + */ + if (data->blockSize % sizeof(uint32_t) != 0U) + { + data->blockSize += + sizeof(uint32_t) - (data->blockSize % sizeof(uint32_t)); /* make the block size as word-aligned */ + } + + totalWords = ((data->blockCount * data->blockSize) / sizeof(uint32_t)); + + /* If watermark level is equal or bigger than totalWords, transfers totalWords data.*/ + if (writeWatermark >= totalWords) + { + wordsCanBeWrote = totalWords; + } + /* If watermark level is less than totalWords and left words to be sent is equal or bigger than watermark, + transfers watermark level words. */ + else if ((writeWatermark < totalWords) && ((totalWords - transferredWords) >= writeWatermark)) + { + wordsCanBeWrote = writeWatermark; + } + /* If watermark level is less than totalWords and left words to be sent is less than watermark, transfers left + words. */ + else + { + wordsCanBeWrote = (totalWords - transferredWords); + } + + i = 0U; + while (i < wordsCanBeWrote) + { + USDHC_WriteData(base, data->txData[transferredWords++]); + i++; + } + } + + return transferredWords; +} + +static status_t USDHC_WriteByDataPortBlocking(USDHC_Type *base, usdhc_data_t *data) +{ + uint32_t totalWords; + + uint32_t transferredWords = 0U, interruptStatus = 0U; + status_t error = kStatus_Success; + + /* + * Add non aligned access support ,user need make sure your buffer size is big + * enough to hold the data,in other words,user need make sure the buffer size + * is 4 byte aligned + */ + if (data->blockSize % sizeof(uint32_t) != 0U) + { + data->blockSize += + sizeof(uint32_t) - (data->blockSize % sizeof(uint32_t)); /* make the block size as word-aligned */ + } + + totalWords = (data->blockCount * data->blockSize) / sizeof(uint32_t); + + while ((error == kStatus_Success) && (transferredWords < totalWords)) + { + while (!(IS_USDHC_FLAG_SET(interruptStatus, (uint32_t)kUSDHC_BufferWriteReadyFlag | + (uint32_t)kUSDHC_DataErrorFlag | + (uint32_t)kUSDHC_TuningErrorFlag))) + { + interruptStatus = USDHC_GetInterruptStatusFlags(base); + } +#if defined(FSL_FEATURE_USDHC_HAS_SDR50_MODE) && (FSL_FEATURE_USDHC_HAS_SDR50_MODE) + if (IS_USDHC_FLAG_SET(interruptStatus, kUSDHC_TuningErrorFlag)) + { + USDHC_ClearInterruptStatusFlags(base, kUSDHC_TuningErrorFlag); + /* if tuning error occur ,return directly */ + return kStatus_USDHC_TuningError; + } + else +#endif + if (IS_USDHC_FLAG_SET(interruptStatus, kUSDHC_DataErrorFlag)) + { + if (!(data->enableIgnoreError)) + { + error = kStatus_Fail; + } + /* clear data error flag */ + USDHC_ClearInterruptStatusFlags(base, kUSDHC_DataErrorFlag); + } + else + { + /* Intentional empty */ + } + + if (error == kStatus_Success) + { + transferredWords = USDHC_WriteDataPort(base, data, transferredWords); + /* clear buffer write ready */ + USDHC_ClearInterruptStatusFlags(base, kUSDHC_BufferWriteReadyFlag); + interruptStatus = 0U; + } + } + + /* Wait write data complete or data transfer error after the last writing operation. */ + while (!(IS_USDHC_FLAG_SET(interruptStatus, (uint32_t)kUSDHC_DataCompleteFlag | (uint32_t)kUSDHC_DataErrorFlag))) + { + interruptStatus = USDHC_GetInterruptStatusFlags(base); + } + + if ((interruptStatus & (uint32_t)kUSDHC_DataErrorFlag) != 0UL) + { + if (!(data->enableIgnoreError)) + { + error = kStatus_Fail; + } + } + USDHC_ClearInterruptStatusFlags(base, ((uint32_t)kUSDHC_DataCompleteFlag | (uint32_t)kUSDHC_DataErrorFlag)); + + return error; +} + +/*! + * brief send command function + * + * param base USDHC peripheral base address. + * param command configuration + */ +void USDHC_SendCommand(USDHC_Type *base, usdhc_command_t *command) +{ + assert(NULL != command); + + uint32_t xferType = base->CMD_XFR_TYP, flags = command->flags; + + if (((base->PRES_STATE & (uint32_t)kUSDHC_CommandInhibitFlag) == 0U) && (command->type != kCARD_CommandTypeEmpty)) + { + if ((command->responseType == kCARD_ResponseTypeR1) || (command->responseType == kCARD_ResponseTypeR5) || + (command->responseType == kCARD_ResponseTypeR6) || (command->responseType == kCARD_ResponseTypeR7)) + { + flags |= ((uint32_t)kUSDHC_ResponseLength48Flag | (uint32_t)kUSDHC_EnableCrcCheckFlag | + (uint32_t)kUSDHC_EnableIndexCheckFlag); + } + else if ((command->responseType == kCARD_ResponseTypeR1b) || (command->responseType == kCARD_ResponseTypeR5b)) + { + flags |= ((uint32_t)kUSDHC_ResponseLength48BusyFlag | (uint32_t)kUSDHC_EnableCrcCheckFlag | + (uint32_t)kUSDHC_EnableIndexCheckFlag); + } + else if (command->responseType == kCARD_ResponseTypeR2) + { + flags |= ((uint32_t)kUSDHC_ResponseLength136Flag | (uint32_t)kUSDHC_EnableCrcCheckFlag); + } + else if ((command->responseType == kCARD_ResponseTypeR3) || (command->responseType == kCARD_ResponseTypeR4)) + { + flags |= ((uint32_t)kUSDHC_ResponseLength48Flag); + } + else + { + /* Intentional empty */ + } + + if (command->type == kCARD_CommandTypeAbort) + { + flags |= (uint32_t)kUSDHC_CommandTypeAbortFlag; + } + + /* config cmd index */ + xferType &= ~(USDHC_CMD_XFR_TYP_CMDINX_MASK | USDHC_CMD_XFR_TYP_CMDTYP_MASK | USDHC_CMD_XFR_TYP_CICEN_MASK | + USDHC_CMD_XFR_TYP_CCCEN_MASK | USDHC_CMD_XFR_TYP_RSPTYP_MASK | USDHC_CMD_XFR_TYP_DPSEL_MASK); + + xferType |= + (((command->index << USDHC_CMD_XFR_TYP_CMDINX_SHIFT) & USDHC_CMD_XFR_TYP_CMDINX_MASK) | + ((flags) & (USDHC_CMD_XFR_TYP_CMDTYP_MASK | USDHC_CMD_XFR_TYP_CICEN_MASK | USDHC_CMD_XFR_TYP_CCCEN_MASK | + USDHC_CMD_XFR_TYP_RSPTYP_MASK | USDHC_CMD_XFR_TYP_DPSEL_MASK))); + + /* config the command xfertype and argument */ + base->CMD_ARG = command->argument; + base->CMD_XFR_TYP = xferType; + } + + if (command->type == kCARD_CommandTypeEmpty) + { + /* disable CMD done interrupt for empty command */ + base->INT_SIGNAL_EN &= ~USDHC_INT_SIGNAL_EN_CCIEN_MASK; + } +} + +static status_t USDHC_WaitCommandDone(USDHC_Type *base, usdhc_command_t *command, bool pollingCmdDone) +{ + assert(NULL != command); + + status_t error = kStatus_Success; + uint32_t interruptStatus = 0U; + /* check if need polling command done or not */ + if (pollingCmdDone) + { + /* Wait command complete or USDHC encounters error. */ + while (!(IS_USDHC_FLAG_SET(interruptStatus, kUSDHC_CommandFlag))) + { + interruptStatus = USDHC_GetInterruptStatusFlags(base); + } + + if ((interruptStatus & (uint32_t)kUSDHC_CommandErrorFlag) != 0UL) + { + error = kStatus_Fail; + } + + /* Receive response when command completes successfully. */ + if (error == kStatus_Success) + { + error = USDHC_ReceiveCommandResponse(base, command); + } + + USDHC_ClearInterruptStatusFlags(base, kUSDHC_CommandFlag); + } + + return error; +} + +static status_t USDHC_TransferDataBlocking(USDHC_Type *base, usdhc_data_t *data, bool enDMA) +{ + status_t error = kStatus_Success; + uint32_t interruptStatus = 0U; + + if (enDMA) + { + /* Wait data complete or USDHC encounters error. */ + while (!(IS_USDHC_FLAG_SET(interruptStatus, ((uint32_t)kUSDHC_DataDMAFlag | (uint32_t)kUSDHC_TuningErrorFlag)))) + { + interruptStatus = USDHC_GetInterruptStatusFlags(base); + } + +#if defined(FSL_FEATURE_USDHC_HAS_SDR50_MODE) && (FSL_FEATURE_USDHC_HAS_SDR50_MODE) + if (IS_USDHC_FLAG_SET(interruptStatus, kUSDHC_TuningErrorFlag)) + { + error = kStatus_USDHC_TuningError; + } + else +#endif + if (IS_USDHC_FLAG_SET(interruptStatus, ((uint32_t)kUSDHC_DataErrorFlag | (uint32_t)kUSDHC_DmaErrorFlag))) + { + if ((!(data->enableIgnoreError)) || (IS_USDHC_FLAG_SET(interruptStatus, kUSDHC_DataTimeoutFlag))) + { + error = kStatus_USDHC_TransferDataFailed; + } + } + else + { + /* Intentional empty */ + } + /* load dummy data */ + if ((data->dataType == (uint32_t)kUSDHC_TransferDataBootcontinous) && (error == kStatus_Success)) + { + *(data->rxData) = s_usdhcBootDummy; + } + + USDHC_ClearInterruptStatusFlags( + base, ((uint32_t)kUSDHC_DataDMAFlag | (uint32_t)kUSDHC_TuningPassFlag | (uint32_t)kUSDHC_TuningErrorFlag)); + } + else + { + if (data->rxData != NULL) + { + error = USDHC_ReadByDataPortBlocking(base, data); + if (error != kStatus_Success) + { + return error; + } + } + else + { + error = USDHC_WriteByDataPortBlocking(base, data); + if (error != kStatus_Success) + { + return error; + } + } + } + + return error; +} + +/*! + * brief USDHC module initialization function. + * + * Configures the USDHC according to the user configuration. + * + * Example: + code + usdhc_config_t config; + config.cardDetectDat3 = false; + config.endianMode = kUSDHC_EndianModeLittle; + config.dmaMode = kUSDHC_DmaModeAdma2; + config.readWatermarkLevel = 128U; + config.writeWatermarkLevel = 128U; + USDHC_Init(USDHC, &config); + endcode + * + * param base USDHC peripheral base address. + * param config USDHC configuration information. + * retval kStatus_Success Operate successfully. + */ +void USDHC_Init(USDHC_Type *base, const usdhc_config_t *config) +{ + assert(config != NULL); + assert((config->writeWatermarkLevel >= 1U) && (config->writeWatermarkLevel <= 128U)); + assert((config->readWatermarkLevel >= 1U) && (config->readWatermarkLevel <= 128U)); +#if !(defined(FSL_FEATURE_USDHC_HAS_NO_RW_BURST_LEN) && FSL_FEATURE_USDHC_HAS_NO_RW_BURST_LEN) + assert(config->writeBurstLen <= 16U); +#endif + uint32_t proctl, sysctl, wml; + +#if !(defined(FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL) && FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL) + /* Enable USDHC clock. */ + CLOCK_EnableClock(s_usdhcClock[USDHC_GetInstance(base)]); +#endif + +#if (defined(FSL_FEATURE_USDHC_HAS_RESET) && FSL_FEATURE_USDHC_HAS_RESET) + /* Reset the USDHC module */ + RESET_PeripheralReset(s_usdhcResets[USDHC_GetInstance(base)]); +#endif + + /* Reset ALL USDHC. */ + base->SYS_CTRL |= USDHC_SYS_CTRL_RSTA_MASK | USDHC_SYS_CTRL_RSTC_MASK | USDHC_SYS_CTRL_RSTD_MASK; + + proctl = base->PROT_CTRL; + wml = base->WTMK_LVL; + sysctl = base->SYS_CTRL; + + proctl &= ~(USDHC_PROT_CTRL_EMODE_MASK | USDHC_PROT_CTRL_DMASEL_MASK); + /* Endian mode*/ + proctl |= USDHC_PROT_CTRL_EMODE(config->endianMode); + +#if (defined(FSL_FEATURE_USDHC_HAS_NO_RW_BURST_LEN) && FSL_FEATURE_USDHC_HAS_NO_RW_BURST_LEN) + /* Watermark level */ + wml &= ~(USDHC_WTMK_LVL_RD_WML_MASK | USDHC_WTMK_LVL_WR_WML_MASK); + wml |= (USDHC_WTMK_LVL_RD_WML(config->readWatermarkLevel) | USDHC_WTMK_LVL_WR_WML(config->writeWatermarkLevel)); +#else + /* Watermark level */ + wml &= ~(USDHC_WTMK_LVL_RD_WML_MASK | USDHC_WTMK_LVL_WR_WML_MASK | USDHC_WTMK_LVL_RD_BRST_LEN_MASK | + USDHC_WTMK_LVL_WR_BRST_LEN_MASK); + wml |= (USDHC_WTMK_LVL_RD_WML(config->readWatermarkLevel) | USDHC_WTMK_LVL_WR_WML(config->writeWatermarkLevel) | + USDHC_WTMK_LVL_RD_BRST_LEN(config->readBurstLen) | USDHC_WTMK_LVL_WR_BRST_LEN(config->writeBurstLen)); +#endif + + /* config the data timeout value */ + sysctl &= ~USDHC_SYS_CTRL_DTOCV_MASK; + sysctl |= USDHC_SYS_CTRL_DTOCV(config->dataTimeout); + + base->SYS_CTRL = sysctl; + base->WTMK_LVL = wml; + base->PROT_CTRL = proctl; + +#if FSL_FEATURE_USDHC_HAS_EXT_DMA + /* disable external DMA */ + base->VEND_SPEC &= ~USDHC_VEND_SPEC_EXT_DMA_EN_MASK; +#endif + /* disable internal DMA and DDR mode */ + base->MIX_CTRL &= ~(USDHC_MIX_CTRL_DMAEN_MASK | USDHC_MIX_CTRL_DDR_EN_MASK); + /* disable interrupt, enable all the interrupt status, clear status. */ + base->INT_STATUS_EN = kUSDHC_AllInterruptFlags; + base->INT_SIGNAL_EN = 0UL; + base->INT_STATUS = kUSDHC_AllInterruptFlags; +} + +/*! + * brief Deinitializes the USDHC. + * + * param base USDHC peripheral base address. + */ +void USDHC_Deinit(USDHC_Type *base) +{ +#if !(defined(FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL) && FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL) + /* Disable clock. */ + CLOCK_DisableClock(s_usdhcClock[USDHC_GetInstance(base)]); +#endif +} + +/*! + * brief Resets the USDHC. + * + * param base USDHC peripheral base address. + * param mask The reset type mask(_usdhc_reset). + * param timeout Timeout for reset. + * retval true Reset successfully. + * retval false Reset failed. + */ +bool USDHC_Reset(USDHC_Type *base, uint32_t mask, uint32_t timeout) +{ + base->SYS_CTRL |= (mask & (USDHC_SYS_CTRL_RSTA_MASK | USDHC_SYS_CTRL_RSTC_MASK | USDHC_SYS_CTRL_RSTD_MASK +#if defined(FSL_FEATURE_USDHC_HAS_SDR50_MODE) && (FSL_FEATURE_USDHC_HAS_SDR50_MODE) + | USDHC_SYS_CTRL_RSTT_MASK +#endif + )); + /* Delay some time to wait reset success. */ + while (IS_USDHC_FLAG_SET(base->SYS_CTRL, mask)) + { + if (timeout == 0UL) + { + break; + } + timeout--; + } + + return ((0UL == timeout) ? false : true); +} + +/*! + * brief Gets the capability information. + * + * param base USDHC peripheral base address. + * param capability Structure to save capability information. + */ +void USDHC_GetCapability(USDHC_Type *base, usdhc_capability_t *capability) +{ + assert(capability != NULL); + + uint32_t htCapability; + uint32_t maxBlockLength; + + htCapability = base->HOST_CTRL_CAP; + + /* Get the capability of USDHC. */ + maxBlockLength = ((htCapability & USDHC_HOST_CTRL_CAP_MBL_MASK) >> USDHC_HOST_CTRL_CAP_MBL_SHIFT); + capability->maxBlockLength = (512UL << maxBlockLength); + /* Other attributes not in HTCAPBLT register. */ + capability->maxBlockCount = USDHC_MAX_BLOCK_COUNT; + capability->flags = + (htCapability & (USDHC_HOST_CTRL_CAP_ADMAS_MASK | USDHC_HOST_CTRL_CAP_HSS_MASK | USDHC_HOST_CTRL_CAP_DMAS_MASK | + USDHC_HOST_CTRL_CAP_SRS_MASK | USDHC_HOST_CTRL_CAP_VS33_MASK)); + capability->flags |= htCapability & USDHC_HOST_CTRL_CAP_VS30_MASK; + capability->flags |= htCapability & USDHC_HOST_CTRL_CAP_VS18_MASK; + capability->flags |= htCapability & USDHC_HOST_CTRL_CAP_DDR50_SUPPORT_MASK; +#if defined(FSL_FEATURE_USDHC_HAS_SDR104_MODE) && FSL_FEATURE_USDHC_HAS_SDR104_MODE + capability->flags |= USDHC_HOST_CTRL_CAP_SDR104_SUPPORT_MASK; +#endif + +#if defined(FSL_FEATURE_USDHC_HAS_SDR104_MODE) && FSL_FEATURE_USDHC_HAS_SDR50_MODE + capability->flags |= USDHC_HOST_CTRL_CAP_SDR50_SUPPORT_MASK; +#endif + /* USDHC support 4/8 bit data bus width. */ + capability->flags |= (USDHC_HOST_CTRL_CAP_MBL_SHIFT << 0UL) | (USDHC_HOST_CTRL_CAP_MBL_SHIFT << 1UL); +} + +/*! + * brief Sets the SD bus clock frequency. + * + * param base USDHC peripheral base address. + * param srcClock_Hz USDHC source clock frequency united in Hz. + * param busClock_Hz SD bus clock frequency united in Hz. + * + * return The nearest frequency of busClock_Hz configured to SD bus. + */ +uint32_t USDHC_SetSdClock(USDHC_Type *base, uint32_t srcClock_Hz, uint32_t busClock_Hz) +{ + assert(srcClock_Hz != 0U); + assert(busClock_Hz != 0U); + + uint32_t totalDiv = 0UL; + uint32_t divisor = 0UL; + uint32_t prescaler = 0UL; + uint32_t sysctl = 0UL; + uint32_t nearestFrequency = 0UL; + + if (busClock_Hz > srcClock_Hz) + { + busClock_Hz = srcClock_Hz; + } + + /* calucate total divisor first */ + if ((totalDiv = srcClock_Hz / busClock_Hz) > (USDHC_MAX_CLKFS * USDHC_MAX_DVS)) + { + return 0UL; + } + + if (totalDiv != 0UL) + { + /* calucate the divisor (srcClock_Hz / divisor) <= busClock_Hz */ + if ((srcClock_Hz / totalDiv) > busClock_Hz) + { + totalDiv++; + } + + /* divide the total divisor to div and prescaler */ + if (totalDiv > USDHC_MAX_DVS) + { + prescaler = totalDiv / USDHC_MAX_DVS; + /* prescaler must be a value which equal 2^n and smaller than SDHC_MAX_CLKFS */ + while (((USDHC_MAX_CLKFS % prescaler) != 0UL) || (prescaler == 1UL)) + { + prescaler++; + } + /* calucate the divisor */ + divisor = totalDiv / prescaler; + /* fine tuning the divisor until divisor * prescaler >= totalDiv */ + while ((divisor * prescaler) < totalDiv) + { + divisor++; + if (divisor > USDHC_MAX_DVS) + { + if ((prescaler <<= 1UL) > USDHC_MAX_CLKFS) + { + return 0UL; + } + divisor = totalDiv / prescaler; + } + } + } + else + { + /* in this situation , divsior and SDCLKFS can generate same clock + use SDCLKFS*/ + if (((totalDiv % 2UL) != 0UL) && (totalDiv != 1UL)) + { + divisor = totalDiv; + prescaler = 1UL; + } + else + { + divisor = 1UL; + prescaler = totalDiv; + } + } + nearestFrequency = srcClock_Hz / (divisor == 0UL ? 1UL : divisor) / prescaler; + } + /* in this condition , srcClock_Hz = busClock_Hz, */ + else + { + /* in DDR mode , set SDCLKFS to 0, divisor = 0, actually the + totoal divider = 2U */ + divisor = 0UL; + prescaler = 0UL; + nearestFrequency = srcClock_Hz; + } + + /* calucate the value write to register */ + if (divisor != 0UL) + { + USDHC_PREV_DVS(divisor); + } + /* calucate the value write to register */ + if (prescaler != 0UL) + { + USDHC_PREV_CLKFS(prescaler, 1UL); + } + + /* Set the SD clock frequency divisor, SD clock frequency select, data timeout counter value. */ + sysctl = base->SYS_CTRL; + sysctl &= ~(USDHC_SYS_CTRL_DVS_MASK | USDHC_SYS_CTRL_SDCLKFS_MASK); + sysctl |= (USDHC_SYS_CTRL_DVS(divisor) | USDHC_SYS_CTRL_SDCLKFS(prescaler)); + base->SYS_CTRL = sysctl; + + /* Wait until the SD clock is stable. */ + while (!IS_USDHC_FLAG_SET(base->PRES_STATE, USDHC_PRES_STATE_SDSTB_MASK)) + { + } + + return nearestFrequency; +} + +/*! + * brief Sends 80 clocks to the card to set it to the active state. + * + * This function must be called each time the card is inserted to ensure that the card can receive the command + * correctly. + * + * param base USDHC peripheral base address. + * param timeout Timeout to initialize card. + * retval true Set card active successfully. + * retval false Set card active failed. + */ +bool USDHC_SetCardActive(USDHC_Type *base, uint32_t timeout) +{ + base->SYS_CTRL |= USDHC_SYS_CTRL_INITA_MASK; + /* Delay some time to wait card become active state. */ + while (IS_USDHC_FLAG_SET(base->SYS_CTRL, USDHC_SYS_CTRL_INITA_MASK)) + { + if (0UL == timeout) + { + break; + } + timeout--; + } + + return ((0UL == timeout) ? false : true); +} + +/*! + * brief the enable/disable DDR mode + * + * param base USDHC peripheral base address. + * param enable/disable flag + * param nibble position + */ +void USDHC_EnableDDRMode(USDHC_Type *base, bool enable, uint32_t nibblePos) +{ + uint32_t prescaler = (base->SYS_CTRL & USDHC_SYS_CTRL_SDCLKFS_MASK) >> USDHC_SYS_CTRL_SDCLKFS_SHIFT; + + if (enable) + { + base->MIX_CTRL &= ~USDHC_MIX_CTRL_NIBBLE_POS_MASK; + base->MIX_CTRL |= (USDHC_MIX_CTRL_DDR_EN_MASK | USDHC_MIX_CTRL_NIBBLE_POS(nibblePos)); + prescaler >>= 1UL; + } + else + { + base->MIX_CTRL &= ~USDHC_MIX_CTRL_DDR_EN_MASK; + + if (prescaler == 0UL) + { + prescaler += 1UL; + } + else + { + prescaler <<= 1UL; + } + } + + base->SYS_CTRL = (base->SYS_CTRL & (~USDHC_SYS_CTRL_SDCLKFS_MASK)) | USDHC_SYS_CTRL_SDCLKFS(prescaler); +} + +/*! + * brief Configures the MMC boot feature. + * + * Example: + code + usdhc_boot_config_t config; + config.ackTimeoutCount = 4; + config.bootMode = kUSDHC_BootModeNormal; + config.blockCount = 5; + config.enableBootAck = true; + config.enableBoot = true; + config.enableAutoStopAtBlockGap = true; + USDHC_SetMmcBootConfig(USDHC, &config); + endcode + * + * param base USDHC peripheral base address. + * param config The MMC boot configuration information. + */ +void USDHC_SetMmcBootConfig(USDHC_Type *base, const usdhc_boot_config_t *config) +{ + assert(config != NULL); + assert(config->ackTimeoutCount <= (USDHC_MMC_BOOT_DTOCV_ACK_MASK >> USDHC_MMC_BOOT_DTOCV_ACK_SHIFT)); + assert(config->blockCount <= (USDHC_MMC_BOOT_BOOT_BLK_CNT_MASK >> USDHC_MMC_BOOT_BOOT_BLK_CNT_SHIFT)); + + uint32_t mmcboot = base->MMC_BOOT; + + mmcboot &= ~(USDHC_MMC_BOOT_DTOCV_ACK_MASK | USDHC_MMC_BOOT_BOOT_MODE_MASK | USDHC_MMC_BOOT_BOOT_BLK_CNT_MASK); + mmcboot |= USDHC_MMC_BOOT_DTOCV_ACK(config->ackTimeoutCount) | USDHC_MMC_BOOT_BOOT_MODE(config->bootMode); + + if (config->enableBootAck) + { + mmcboot |= USDHC_MMC_BOOT_BOOT_ACK_MASK; + } + if (config->enableAutoStopAtBlockGap) + { + mmcboot |= + USDHC_MMC_BOOT_AUTO_SABG_EN_MASK | USDHC_MMC_BOOT_BOOT_BLK_CNT(USDHC_MAX_BLOCK_COUNT - config->blockCount); + /* always set the block count to USDHC_MAX_BLOCK_COUNT to use auto stop at block gap feature */ + base->BLK_ATT = ((base->BLK_ATT & ~(USDHC_BLK_ATT_BLKSIZE_MASK | USDHC_BLK_ATT_BLKCNT_MASK)) | + (USDHC_BLK_ATT_BLKSIZE(config->blockSize) | USDHC_BLK_ATT_BLKCNT(USDHC_MAX_BLOCK_COUNT))); + } + else + { + base->BLK_ATT = ((base->BLK_ATT & ~(USDHC_BLK_ATT_BLKSIZE_MASK | USDHC_BLK_ATT_BLKCNT_MASK)) | + (USDHC_BLK_ATT_BLKSIZE(config->blockSize) | USDHC_BLK_ATT_BLKCNT(config->blockCount))); + } + + base->MMC_BOOT = mmcboot; +} + +/*! + * brief Sets the ADMA1 descriptor table configuration. + * + * param admaTable Adma table address. + * param admaTableWords Adma table length. + * param dataBufferAddr Data buffer address. + * param dataBytes Data length. + * param flags ADAM descriptor flag, used to indicate to create multiple or single descriptor, please + * reference _usdhc_adma_flag. + * retval kStatus_OutOfRange ADMA descriptor table length isn't enough to describe data. + * retval kStatus_Success Operate successfully. + */ +status_t USDHC_SetADMA1Descriptor( + uint32_t *admaTable, uint32_t admaTableWords, const uint32_t *dataBufferAddr, uint32_t dataBytes, uint32_t flags) +{ + assert(NULL != admaTable); + assert(NULL != dataBufferAddr); + + uint32_t miniEntries, startEntries = 0UL, + maxEntries = (admaTableWords * sizeof(uint32_t)) / sizeof(usdhc_adma1_descriptor_t); + usdhc_adma1_descriptor_t *adma1EntryAddress = (usdhc_adma1_descriptor_t *)(uint32_t)(admaTable); + uint32_t i, dmaBufferLen = 0UL; + const uint32_t *data = dataBufferAddr; + + if (((uint32_t)data % USDHC_ADMA1_ADDRESS_ALIGN) != 0UL) + { + return kStatus_USDHC_DMADataAddrNotAlign; + } + + if (flags == (uint32_t)kUSDHC_AdmaDescriptorMultipleFlag) + { + return kStatus_USDHC_NotSupport; + } + /* + * Add non aligned access support ,user need make sure your buffer size is big + * enough to hold the data,in other words,user need make sure the buffer size + * is 4 byte aligned + */ + if (dataBytes % sizeof(uint32_t) != 0UL) + { + /* make the data length as word-aligned */ + dataBytes += sizeof(uint32_t) - (dataBytes % sizeof(uint32_t)); + } + + /* Check if ADMA descriptor's number is enough. */ + if ((dataBytes % USDHC_ADMA1_DESCRIPTOR_MAX_LENGTH_PER_ENTRY) == 0UL) + { + miniEntries = dataBytes / USDHC_ADMA1_DESCRIPTOR_MAX_LENGTH_PER_ENTRY; + } + else + { + miniEntries = ((dataBytes / USDHC_ADMA1_DESCRIPTOR_MAX_LENGTH_PER_ENTRY) + 1UL); + } + + /* ADMA1 needs two descriptors to finish a transfer */ + miniEntries <<= 1UL; + + if (miniEntries + startEntries > maxEntries) + { + return kStatus_OutOfRange; + } + + for (i = startEntries; i < (miniEntries + startEntries); i += 2UL) + { + if (dataBytes > USDHC_ADMA1_DESCRIPTOR_MAX_LENGTH_PER_ENTRY) + { + dmaBufferLen = USDHC_ADMA1_DESCRIPTOR_MAX_LENGTH_PER_ENTRY; + } + else + { + dmaBufferLen = dataBytes; + } + + adma1EntryAddress[i] = (dmaBufferLen << USDHC_ADMA1_DESCRIPTOR_LENGTH_SHIFT); + adma1EntryAddress[i] |= (uint32_t)kUSDHC_Adma1DescriptorTypeSetLength; + adma1EntryAddress[i + 1UL] = (uint32_t)(data); + adma1EntryAddress[i + 1UL] |= (uint32_t)kUSDHC_Adma1DescriptorTypeTransfer; + data += dmaBufferLen / sizeof(uint32_t); + dataBytes -= dmaBufferLen; + } + /* the end of the descriptor */ + adma1EntryAddress[i - 1UL] |= (uint32_t)kUSDHC_Adma1DescriptorEndFlag; + + return kStatus_Success; +} + +/*! + * brief Sets the ADMA2 descriptor table configuration. + * + * param admaTable Adma table address. + * param admaTableWords Adma table length. + * param dataBufferAddr Data buffer address. + * param dataBytes Data Data length. + * param flags ADAM descriptor flag, used to indicate to create multiple or single descriptor, please + * reference _usdhc_adma_flag. + * retval kStatus_OutOfRange ADMA descriptor table length isn't enough to describe data. + * retval kStatus_Success Operate successfully. + */ +status_t USDHC_SetADMA2Descriptor( + uint32_t *admaTable, uint32_t admaTableWords, const uint32_t *dataBufferAddr, uint32_t dataBytes, uint32_t flags) +{ + assert(NULL != admaTable); + assert(NULL != dataBufferAddr); + + uint32_t miniEntries, startEntries = 0UL, + maxEntries = (admaTableWords * sizeof(uint32_t)) / sizeof(usdhc_adma2_descriptor_t); + usdhc_adma2_descriptor_t *adma2EntryAddress = (usdhc_adma2_descriptor_t *)(uint32_t)(admaTable); + uint32_t i, dmaBufferLen = 0UL; + const uint32_t *data = dataBufferAddr; + + if (((uint32_t)data % USDHC_ADMA2_ADDRESS_ALIGN) != 0UL) + { + return kStatus_USDHC_DMADataAddrNotAlign; + } + /* + * Add non aligned access support ,user need make sure your buffer size is big + * enough to hold the data,in other words,user need make sure the buffer size + * is 4 byte aligned + */ + if (dataBytes % sizeof(uint32_t) != 0UL) + { + /* make the data length as word-aligned */ + dataBytes += sizeof(uint32_t) - (dataBytes % sizeof(uint32_t)); + } + + /* Check if ADMA descriptor's number is enough. */ + if ((dataBytes % USDHC_ADMA2_DESCRIPTOR_MAX_LENGTH_PER_ENTRY) == 0UL) + { + miniEntries = dataBytes / USDHC_ADMA2_DESCRIPTOR_MAX_LENGTH_PER_ENTRY; + } + else + { + miniEntries = ((dataBytes / USDHC_ADMA2_DESCRIPTOR_MAX_LENGTH_PER_ENTRY) + 1UL); + } + /* calucate the start entry for multiple descriptor mode, ADMA engine is not stop, so update the descriptor + data adress and data size is enough */ + if (flags == (uint32_t)kUSDHC_AdmaDescriptorMultipleFlag) + { + for (i = 0UL; i < maxEntries; i++) + { + if ((adma2EntryAddress[i].attribute & (uint32_t)kUSDHC_Adma2DescriptorValidFlag) == 0UL) + { + break; + } + } + startEntries = i; + /* add one entry for dummy entry */ + miniEntries += 1UL; + } + + if ((miniEntries + startEntries) > maxEntries) + { + return kStatus_OutOfRange; + } + + for (i = startEntries; i < (miniEntries + startEntries); i++) + { + if (dataBytes > USDHC_ADMA2_DESCRIPTOR_MAX_LENGTH_PER_ENTRY) + { + dmaBufferLen = USDHC_ADMA2_DESCRIPTOR_MAX_LENGTH_PER_ENTRY; + } + else + { + dmaBufferLen = (dataBytes == 0UL ? sizeof(uint32_t) : + dataBytes); /* adma don't support 0 data length transfer descriptor */ + } + + /* Each descriptor for ADMA2 is 64-bit in length */ + adma2EntryAddress[i].address = (dataBytes == 0UL) ? &s_usdhcBootDummy : data; + adma2EntryAddress[i].attribute = (dmaBufferLen << USDHC_ADMA2_DESCRIPTOR_LENGTH_SHIFT); + adma2EntryAddress[i].attribute |= + (dataBytes == 0UL) ? + 0UL : + ((uint32_t)kUSDHC_Adma2DescriptorTypeTransfer | (uint32_t)kUSDHC_Adma2DescriptorInterruptFlag); + data += (dmaBufferLen / sizeof(uint32_t)); + + if (dataBytes != 0UL) + { + dataBytes -= dmaBufferLen; + } + } + + /* add a dummy valid ADMA descriptor for multiple descriptor mode, this is useful when transfer boot data, the ADMA + engine + will not stop at block gap */ + if (flags == (uint32_t)kUSDHC_AdmaDescriptorMultipleFlag) + { + adma2EntryAddress[startEntries + 1UL].attribute |= (uint32_t)kUSDHC_Adma2DescriptorTypeTransfer; + } + else + { + /* set the end bit */ + adma2EntryAddress[i - 1UL].attribute |= (uint32_t)kUSDHC_Adma2DescriptorEndFlag; + } + + return kStatus_Success; +} + +/*! + * brief Internal DMA configuration. + * This function is used to config the USDHC DMA related registers. + * param base USDHC peripheral base address. + * param adma configuration + * param dataAddr transfer data address, a simple DMA parameter, if ADMA is used, leave it to NULL. + * param enAutoCmd23 flag to indicate Auto CMD23 is enable or not, a simple DMA parameter,if ADMA is used, leave it to + * false. + * retval kStatus_OutOfRange ADMA descriptor table length isn't enough to describe data. + * retval kStatus_Success Operate successfully. + */ +status_t USDHC_SetInternalDmaConfig(USDHC_Type *base, + usdhc_adma_config_t *dmaConfig, + const uint32_t *dataAddr, + bool enAutoCmd23) +{ + assert(dmaConfig != NULL); + assert(dataAddr != NULL); + assert((NULL != dmaConfig->admaTable) && + (((USDHC_ADMA_TABLE_ADDRESS_ALIGN - 1U) & (uint32_t)dmaConfig->admaTable) == 0UL)); + +#if FSL_FEATURE_USDHC_HAS_EXT_DMA + /* disable the external DMA if support */ + base->VEND_SPEC &= ~USDHC_VEND_SPEC_EXT_DMA_EN_MASK; +#endif + + if (dmaConfig->dmaMode == kUSDHC_DmaModeSimple) + { + /* check DMA data buffer address align or not */ + if (((uint32_t)dataAddr % USDHC_ADMA2_ADDRESS_ALIGN) != 0UL) + { + return kStatus_USDHC_DMADataAddrNotAlign; + } + /* in simple DMA mode if use auto CMD23, address should load to ADMA addr, + and block count should load to DS_ADDR*/ + if (enAutoCmd23) + { + base->ADMA_SYS_ADDR = (uint32_t)dataAddr; + } + else + { + base->DS_ADDR = (uint32_t)dataAddr; + } + } + else + { + /* When use ADMA, disable simple DMA */ + base->DS_ADDR = 0UL; + base->ADMA_SYS_ADDR = (uint32_t)(dmaConfig->admaTable); + } + +#if (defined(FSL_FEATURE_USDHC_HAS_NO_RW_BURST_LEN) && FSL_FEATURE_USDHC_HAS_NO_RW_BURST_LEN) + /* select DMA mode and config the burst length */ + base->PROT_CTRL &= ~(USDHC_PROT_CTRL_DMASEL_MASK); + base->PROT_CTRL |= USDHC_PROT_CTRL_DMASEL(dmaConfig->dmaMode); +#else + /* select DMA mode and config the burst length */ + base->PROT_CTRL &= ~(USDHC_PROT_CTRL_DMASEL_MASK | USDHC_PROT_CTRL_BURST_LEN_EN_MASK); + base->PROT_CTRL |= USDHC_PROT_CTRL_DMASEL(dmaConfig->dmaMode) | USDHC_PROT_CTRL_BURST_LEN_EN(dmaConfig->burstLen); +#endif + /* enable DMA */ + base->MIX_CTRL |= USDHC_MIX_CTRL_DMAEN_MASK; + + return kStatus_Success; +} + +/*! + * brief Sets the DMA descriptor table configuration. + * A high level DMA descriptor configuration function. + * param base USDHC peripheral base address. + * param adma configuration + * param data Data descriptor + * param flags ADAM descriptor flag, used to indicate to create multiple or single descriptor, please + * reference _usdhc_adma_flag + * retval kStatus_OutOfRange ADMA descriptor table length isn't enough to describe data. + * retval kStatus_Success Operate successfully. + */ +status_t USDHC_SetAdmaTableConfig(USDHC_Type *base, + usdhc_adma_config_t *dmaConfig, + usdhc_data_t *dataConfig, + uint32_t flags) +{ + assert(NULL != dmaConfig); + assert((NULL != dmaConfig->admaTable) && + (((USDHC_ADMA_TABLE_ADDRESS_ALIGN - 1U) & (uint32_t)dmaConfig->admaTable) == 0UL)); + assert(NULL != dataConfig); + + status_t error = kStatus_Fail; + uint32_t bootDummyOffset = + dataConfig->dataType == (uint32_t)kUSDHC_TransferDataBootcontinous ? sizeof(uint32_t) : 0UL; + const uint32_t *data = + (const uint32_t *)((uint32_t)((dataConfig->rxData == NULL) ? dataConfig->txData : dataConfig->rxData) + + bootDummyOffset); + uint32_t blockSize = dataConfig->blockSize * dataConfig->blockCount - bootDummyOffset; + +#if FSL_FEATURE_USDHC_HAS_EXT_DMA + if (dmaConfig->dmaMode == kUSDHC_ExternalDMA) + { + /* enable the external DMA */ + base->VEND_SPEC |= USDHC_VEND_SPEC_EXT_DMA_EN_MASK; + } + else +#endif + if (dmaConfig->dmaMode == kUSDHC_DmaModeSimple) + { + error = kStatus_Success; + } + else if (dmaConfig->dmaMode == kUSDHC_DmaModeAdma1) + { + error = USDHC_SetADMA1Descriptor(dmaConfig->admaTable, dmaConfig->admaTableWords, data, blockSize, flags); + } + /* ADMA2 */ + else + { + error = USDHC_SetADMA2Descriptor(dmaConfig->admaTable, dmaConfig->admaTableWords, data, blockSize, flags); + } + + /* for internal dma, internal DMA configurations should not update the configurations when continous transfer the + * boot data, only the DMA descriptor need update */ + if ((dmaConfig->dmaMode != kUSDHC_ExternalDMA) && (error == kStatus_Success) && + (dataConfig->dataType != (uint32_t)kUSDHC_TransferDataBootcontinous)) + { + error = USDHC_SetInternalDmaConfig(base, dmaConfig, data, dataConfig->enableAutoCommand23); + } + + return error; +} + +/*! + * brief Transfers the command/data using a blocking method. + * + * This function waits until the command response/data is received or the USDHC encounters an error by polling the + * status + * flag. + * The application must not call this API in multiple threads at the same time. Because of that this API doesn't support + * the re-entry mechanism. + * + * note There is no need to call the API 'USDHC_TransferCreateHandle' when calling this API. + * + * param base USDHC peripheral base address. + * param adma configuration + * param transfer Transfer content. + * retval kStatus_InvalidArgument Argument is invalid. + * retval kStatus_USDHC_PrepareAdmaDescriptorFailed Prepare ADMA descriptor failed. + * retval kStatus_USDHC_SendCommandFailed Send command failed. + * retval kStatus_USDHC_TransferDataFailed Transfer data failed. + * retval kStatus_Success Operate successfully. + */ +status_t USDHC_TransferBlocking(USDHC_Type *base, usdhc_adma_config_t *dmaConfig, usdhc_transfer_t *transfer) +{ + assert(transfer != NULL); + + status_t error = kStatus_Fail; + usdhc_command_t *command = transfer->command; + usdhc_data_t *data = transfer->data; + bool enDMA = true; + bool executeTuning = ((data == NULL) ? false : data->dataType == (uint32_t)kUSDHC_TransferDataTuning); + +#if defined(FSL_FEATURE_USDHC_HAS_SDR50_MODE) && (FSL_FEATURE_USDHC_HAS_SDR50_MODE) + /*check re-tuning request*/ + if ((USDHC_GetInterruptStatusFlags(base) & (uint32_t)kUSDHC_ReTuningEventFlag) != 0UL) + { + USDHC_ClearInterruptStatusFlags(base, kUSDHC_ReTuningEventFlag); + return kStatus_USDHC_ReTuningRequest; + } +#endif + + /* Update ADMA descriptor table according to different DMA mode(no DMA, ADMA1, ADMA2).*/ + if ((data != NULL) && (dmaConfig != NULL) && (!executeTuning)) + { + error = USDHC_SetAdmaTableConfig( + base, dmaConfig, data, + (uint32_t)(IS_USDHC_FLAG_SET(data->dataType, kUSDHC_TransferDataBoot) ? kUSDHC_AdmaDescriptorMultipleFlag : + kUSDHC_AdmaDescriptorSingleFlag)); + } + + /* if the DMA desciptor configure fail or not needed , disable it */ + if (error != kStatus_Success) + { + enDMA = false; + /* disable DMA, using polling mode in this situation */ + USDHC_EnableInternalDMA(base, false); + } +#if defined(FSL_SDK_ENABLE_DRIVER_CACHE_CONTROL) && FSL_SDK_ENABLE_DRIVER_CACHE_CONTROL + else + { + if (data->txData != NULL) + { + /* clear the DCACHE */ + DCACHE_CleanByRange((uint32_t)data->txData, (data->blockSize) * (data->blockCount)); + } + else + { + /* clear the DCACHE */ + DCACHE_CleanInvalidateByRange((uint32_t)data->rxData, (data->blockSize) * (data->blockCount)); + } + } +#endif + + /* config the data transfer parameter */ + error = USDHC_SetDataTransferConfig(base, data, &(command->flags), enDMA); + if (kStatus_Success != error) + { + return error; + } + /* send command first */ + USDHC_SendCommand(base, command); + /* wait command done */ + error = + USDHC_WaitCommandDone(base, command, (data == NULL) || (data->dataType == (uint32_t)kUSDHC_TransferDataNormal)); + if (kStatus_Success != error) + { + return kStatus_USDHC_SendCommandFailed; + } + + /* wait transfer data finsih */ + if (data != NULL) + { + error = USDHC_TransferDataBlocking(base, data, enDMA); + if (kStatus_Success != error) + { + return error; + } + } + + return kStatus_Success; +} + +/*! + * brief Transfers the command/data using an interrupt and an asynchronous method. + * + * This function sends a command and data and returns immediately. It doesn't wait the transfer complete or encounter an + * error. + * The application must not call this API in multiple threads at the same time. Because of that this API doesn't support + * the re-entry mechanism. + * + * note Call the API 'USDHC_TransferCreateHandle' when calling this API. + * + * param base USDHC peripheral base address. + * param handle USDHC handle. + * param adma configuration. + * param transfer Transfer content. + * retval kStatus_InvalidArgument Argument is invalid. + * retval kStatus_USDHC_BusyTransferring Busy transferring. + * retval kStatus_USDHC_PrepareAdmaDescriptorFailed Prepare ADMA descriptor failed. + * retval kStatus_Success Operate successfully. + */ +status_t USDHC_TransferNonBlocking(USDHC_Type *base, + usdhc_handle_t *handle, + usdhc_adma_config_t *dmaConfig, + usdhc_transfer_t *transfer) +{ + assert(handle != NULL); + assert(transfer != NULL); + + status_t error = kStatus_Fail; + usdhc_command_t *command = transfer->command; + usdhc_data_t *data = transfer->data; + bool executeTuning = ((data == NULL) ? false : data->dataType == (uint32_t)kUSDHC_TransferDataTuning); + bool enDMA = true; + +#if defined(FSL_FEATURE_USDHC_HAS_SDR50_MODE) && (FSL_FEATURE_USDHC_HAS_SDR50_MODE) + /*check re-tuning request*/ + if ((USDHC_GetInterruptStatusFlags(base) & ((uint32_t)kUSDHC_ReTuningEventFlag)) != 0UL) + { + USDHC_ClearInterruptStatusFlags(base, kUSDHC_ReTuningEventFlag); + return kStatus_USDHC_ReTuningRequest; + } +#endif + /* Save command and data into handle before transferring. */ + + handle->command = command; + handle->data = data; + /* transferredWords will only be updated in ISR when transfer way is DATAPORT. */ + handle->transferredWords = 0UL; + + /* Update ADMA descriptor table according to different DMA mode(no DMA, ADMA1, ADMA2).*/ + if ((data != NULL) && (dmaConfig != NULL) && (!executeTuning)) + { + error = + USDHC_SetAdmaTableConfig(base, dmaConfig, data, + (uint32_t)(IS_USDHC_FLAG_SET(data->dataType, (uint32_t)kUSDHC_TransferDataBoot) ? + kUSDHC_AdmaDescriptorMultipleFlag : + kUSDHC_AdmaDescriptorSingleFlag)); + } + + /* if the DMA desciptor configure fail or not needed , disable it */ + if (error != kStatus_Success) + { + /* disable DMA, using polling mode in this situation */ + USDHC_EnableInternalDMA(base, false); + enDMA = false; + } +#if defined(FSL_SDK_ENABLE_DRIVER_CACHE_CONTROL) && FSL_SDK_ENABLE_DRIVER_CACHE_CONTROL + else + { + if (data->txData != NULL) + { + /* clear the DCACHE */ + DCACHE_CleanByRange((uint32_t)data->txData, (data->blockSize) * (data->blockCount)); + } + else + { + /* clear the DCACHE */ + DCACHE_CleanInvalidateByRange((uint32_t)data->rxData, (data->blockSize) * (data->blockCount)); + } + } +#endif + + error = USDHC_SetDataTransferConfig(base, data, &(command->flags), enDMA); + if (kStatus_Success != error) + { + return error; + } + + /* enable interrupt per transfer request */ + if (handle->data != NULL) + { + USDHC_ClearInterruptStatusFlags( + base, (uint32_t)(enDMA == false ? kUSDHC_DataFlag : kUSDHC_DataDMAFlag) | (uint32_t)kUSDHC_CommandFlag); + USDHC_EnableInterruptSignal( + base, (uint32_t)(enDMA == false ? kUSDHC_DataFlag : kUSDHC_DataDMAFlag) | (uint32_t)kUSDHC_CommandFlag); + } + else + { + USDHC_ClearInterruptStatusFlags(base, kUSDHC_CommandFlag); + USDHC_EnableInterruptSignal(base, kUSDHC_CommandFlag); + } + + /* send command first */ + USDHC_SendCommand(base, command); + + return kStatus_Success; +} + +#if defined(FSL_FEATURE_USDHC_HAS_SDR50_MODE) && (FSL_FEATURE_USDHC_HAS_SDR50_MODE) +/*! + * brief manual tuning trigger or abort + * User should handle the tuning cmd and find the boundary of the delay + * then calucate a average value which will be config to the CLK_TUNE_CTRL_STATUS + * This function should called before USDHC_AdjustDelayforSDR104 function + * param base USDHC peripheral base address. + * param tuning enable flag + */ +void USDHC_EnableManualTuning(USDHC_Type *base, bool enable) +{ + if (enable) + { + /* make sure std_tun_en bit is clear */ + base->TUNING_CTRL &= ~USDHC_TUNING_CTRL_STD_TUNING_EN_MASK; + /* disable auto tuning here */ + base->MIX_CTRL &= ~USDHC_MIX_CTRL_AUTO_TUNE_EN_MASK; + /* execute tuning for SDR104 mode */ + base->MIX_CTRL |= + USDHC_MIX_CTRL_EXE_TUNE_MASK | USDHC_MIX_CTRL_SMP_CLK_SEL_MASK | USDHC_MIX_CTRL_FBCLK_SEL_MASK; + } + else + { /* abort the tuning */ + base->MIX_CTRL &= ~USDHC_MIX_CTRL_EXE_TUNE_MASK; + } +} + +/*! + * brief the SDR104 mode delay setting adjust + * This function should called after USDHC_ManualTuningForSDR104 + * param base USDHC peripheral base address. + * param delay setting configuration + * retval kStatus_Fail config the delay setting fail + * retval kStatus_Success config the delay setting success + */ +status_t USDHC_AdjustDelayForManualTuning(USDHC_Type *base, uint32_t delay) +{ + uint32_t clkTuneCtrl = 0UL; + + clkTuneCtrl = base->CLK_TUNE_CTRL_STATUS; + + clkTuneCtrl &= ~USDHC_CLK_TUNE_CTRL_STATUS_DLY_CELL_SET_PRE_MASK; + + clkTuneCtrl |= USDHC_CLK_TUNE_CTRL_STATUS_DLY_CELL_SET_PRE(delay); + + /* load the delay setting */ + base->CLK_TUNE_CTRL_STATUS = clkTuneCtrl; + /* check delat setting error */ + if (IS_USDHC_FLAG_SET(base->CLK_TUNE_CTRL_STATUS, + USDHC_CLK_TUNE_CTRL_STATUS_PRE_ERR_MASK | USDHC_CLK_TUNE_CTRL_STATUS_NXT_ERR_MASK)) + { + return kStatus_Fail; + } + + return kStatus_Success; +} + +/*! + * brief the enable standard tuning function + * The standard tuning window and tuning counter use the default config + * tuning cmd is send by the software, user need to check the tuning result + * can be used for SDR50,SDR104,HS200 mode tuning + * param base USDHC peripheral base address. + * param tuning start tap + * param tuning step + * param enable/disable flag + */ +void USDHC_EnableStandardTuning(USDHC_Type *base, uint32_t tuningStartTap, uint32_t step, bool enable) +{ + uint32_t tuningCtrl = 0UL; + + if (enable) + { + /* feedback clock */ + base->MIX_CTRL |= USDHC_MIX_CTRL_FBCLK_SEL_MASK; + /* config tuning start and step */ + tuningCtrl = base->TUNING_CTRL; + tuningCtrl &= ~(USDHC_TUNING_CTRL_TUNING_START_TAP_MASK | USDHC_TUNING_CTRL_TUNING_STEP_MASK); + tuningCtrl |= (USDHC_TUNING_CTRL_TUNING_START_TAP(tuningStartTap) | USDHC_TUNING_CTRL_TUNING_STEP(step) | + USDHC_TUNING_CTRL_STD_TUNING_EN_MASK); + base->TUNING_CTRL = tuningCtrl; + + /* excute tuning */ + base->AUTOCMD12_ERR_STATUS |= + (USDHC_AUTOCMD12_ERR_STATUS_EXECUTE_TUNING_MASK | USDHC_AUTOCMD12_ERR_STATUS_SMP_CLK_SEL_MASK); + } + else + { + /* disable the standard tuning */ + base->TUNING_CTRL &= ~USDHC_TUNING_CTRL_STD_TUNING_EN_MASK; + /* clear excute tuning */ + base->AUTOCMD12_ERR_STATUS &= + ~(USDHC_AUTOCMD12_ERR_STATUS_EXECUTE_TUNING_MASK | USDHC_AUTOCMD12_ERR_STATUS_SMP_CLK_SEL_MASK); + } +} + +#if FSL_FEATURE_USDHC_HAS_HS400_MODE +/*! + * brief config the strobe DLL delay target and update interval + * + * param base USDHC peripheral base address. + * param delayTarget delay target + * param updateInterval update interval + */ +void USDHC_ConfigStrobeDLL(USDHC_Type *base, uint32_t delayTarget, uint32_t updateInterval) +{ + assert(delayTarget <= (USDHC_STROBE_DLL_CTRL_STROBE_DLL_CTRL_SLV_DLY_TARGET_MASK >> + USDHC_STROBE_DLL_CTRL_STROBE_DLL_CTRL_SLV_DLY_TARGET_SHIFT)); + + /* reset strobe dll firstly */ + base->STROBE_DLL_CTRL |= USDHC_STROBE_DLL_CTRL_STROBE_DLL_CTRL_RESET_MASK; + /* clear reset and other register fields */ + base->STROBE_DLL_CTRL = 0; + /* configure the DELAY target and update interval */ + base->STROBE_DLL_CTRL |= USDHC_STROBE_DLL_CTRL_STROBE_DLL_CTRL_ENABLE_MASK | + USDHC_STROBE_DLL_CTRL_STROBE_DLL_CTRL_SLV_UPDATE_INT(updateInterval) | + USDHC_STROBE_DLL_CTRL_STROBE_DLL_CTRL_SLV_DLY_TARGET(delayTarget); + + while ( + (USDHC_GetStrobeDLLStatus(base) & (USDHC_STROBE_DLL_STATUS_STROBE_DLL_STS_SLV_LOCK_MASK | + USDHC_STROBE_DLL_STATUS_STROBE_DLL_STS_REF_LOCK_MASK)) != + ((USDHC_STROBE_DLL_STATUS_STROBE_DLL_STS_SLV_LOCK_MASK | USDHC_STROBE_DLL_STATUS_STROBE_DLL_STS_REF_LOCK_MASK))) + { + } +} +#endif + +/*! + * brief the auto tuning enbale for CMD/DATA line + * + * param base USDHC peripheral base address. + */ +void USDHC_EnableAutoTuningForCmdAndData(USDHC_Type *base) +{ + uint32_t busWidth = (base->PROT_CTRL & USDHC_PROT_CTRL_DTW_MASK) >> USDHC_PROT_CTRL_DTW_SHIFT; + + base->VEND_SPEC2 |= USDHC_VEND_SPEC2_TUNING_CMD_EN_MASK; + + /* 1bit data width */ + if (busWidth == 0UL) + { + base->VEND_SPEC2 &= ~USDHC_VEND_SPEC2_TUNING_8bit_EN_MASK; + base->VEND_SPEC2 |= USDHC_VEND_SPEC2_TUNING_1bit_EN_MASK; + } + /* 4bit data width */ + else if (busWidth == 1UL) + { + base->VEND_SPEC2 &= ~USDHC_VEND_SPEC2_TUNING_8bit_EN_MASK; + base->VEND_SPEC2 &= ~USDHC_VEND_SPEC2_TUNING_1bit_EN_MASK; + } + /* 8bit data width */ + else + { + base->VEND_SPEC2 |= USDHC_VEND_SPEC2_TUNING_8bit_EN_MASK; + base->VEND_SPEC2 &= ~USDHC_VEND_SPEC2_TUNING_1bit_EN_MASK; + } +} +#endif /* FSL_FEATURE_USDHC_HAS_SDR50_MODE */ + +static void USDHC_TransferHandleCardDetect(USDHC_Type *base, usdhc_handle_t *handle, uint32_t interruptFlags) +{ + if (IS_USDHC_FLAG_SET(interruptFlags, kUSDHC_CardInsertionFlag)) + { + if (handle->callback.CardInserted != NULL) + { + handle->callback.CardInserted(base, handle->userData); + } + } + else + { + if (handle->callback.CardRemoved != NULL) + { + handle->callback.CardRemoved(base, handle->userData); + } + } +} + +static void USDHC_TransferHandleCommand(USDHC_Type *base, usdhc_handle_t *handle, uint32_t interruptFlags) +{ + assert(handle->command != NULL); + + if (IS_USDHC_FLAG_SET(interruptFlags, kUSDHC_CommandErrorFlag)) + { + if (handle->callback.TransferComplete != NULL) + { + handle->callback.TransferComplete(base, handle, kStatus_USDHC_SendCommandFailed, handle->userData); + } + } + else + { + /* Receive response */ + if (kStatus_Success != USDHC_ReceiveCommandResponse(base, handle->command)) + { + if (handle->callback.TransferComplete != NULL) + { + handle->callback.TransferComplete(base, handle, kStatus_USDHC_SendCommandFailed, handle->userData); + } + } + else + { + if (handle->callback.TransferComplete != NULL) + { + handle->callback.TransferComplete(base, handle, kStatus_USDHC_SendCommandSuccess, handle->userData); + } + } + } + /* disable interrupt signal and reset command pointer */ + USDHC_DisableInterruptSignal(base, kUSDHC_CommandFlag); + handle->command = NULL; +} + +static void USDHC_TransferHandleData(USDHC_Type *base, usdhc_handle_t *handle, uint32_t interruptFlags) +{ + assert(handle->data != NULL); + + status_t transferStatus = kStatus_USDHC_BusyTransferring; + uint32_t transferredWords = handle->transferredWords; + + if ((!(handle->data->enableIgnoreError)) && + (IS_USDHC_FLAG_SET(interruptFlags, (uint32_t)kUSDHC_DataErrorFlag | (uint32_t)kUSDHC_DmaErrorFlag))) + { + transferStatus = kStatus_USDHC_TransferDataFailed; + } + else + { + if (IS_USDHC_FLAG_SET(interruptFlags, kUSDHC_BufferReadReadyFlag)) + { + /* std tuning process only need to wait BRR */ + if (handle->data->dataType == (uint32_t)kUSDHC_TransferDataTuning) + { + transferStatus = kStatus_USDHC_TransferDataComplete; + } + else + { + handle->transferredWords = USDHC_ReadDataPort(base, handle->data, transferredWords); + } + } + else if (IS_USDHC_FLAG_SET(interruptFlags, kUSDHC_BufferWriteReadyFlag)) + { + handle->transferredWords = USDHC_WriteDataPort(base, handle->data, transferredWords); + } + else + { + if ((IS_USDHC_FLAG_SET(interruptFlags, kUSDHC_DmaCompleteFlag)) && + (handle->data->dataType == (uint32_t)kUSDHC_TransferDataBootcontinous)) + { + *(handle->data->rxData) = s_usdhcBootDummy; + } + + if (IS_USDHC_FLAG_SET(interruptFlags, kUSDHC_DataCompleteFlag)) + { + transferStatus = kStatus_USDHC_TransferDataComplete; + +#if defined(FSL_SDK_ENABLE_DRIVER_CACHE_CONTROL) && FSL_SDK_ENABLE_DRIVER_CACHE_CONTROL + if (handle->data->rxData != NULL) + { + DCACHE_InvalidateByRange((uint32_t)(handle->data->rxData), + (handle->data->blockSize) * (handle->data->blockCount)); + } +#endif + } + } + } + + if ((handle->callback.TransferComplete != NULL) && (transferStatus != kStatus_USDHC_BusyTransferring)) + { + handle->callback.TransferComplete(base, handle, transferStatus, handle->userData); + USDHC_DisableInterruptSignal(base, (uint32_t)kUSDHC_DataFlag | (uint32_t)kUSDHC_DataDMAFlag); + handle->data = NULL; + } +} + +static void USDHC_TransferHandleSdioInterrupt(USDHC_Type *base, usdhc_handle_t *handle) +{ + if (handle->callback.SdioInterrupt != NULL) + { + handle->callback.SdioInterrupt(base, handle->userData); + } +} + +#if defined(FSL_FEATURE_USDHC_HAS_SDR50_MODE) && (FSL_FEATURE_USDHC_HAS_SDR50_MODE) +static void USDHC_TransferHandleReTuning(USDHC_Type *base, usdhc_handle_t *handle, uint32_t interruptFlags) +{ + assert(handle->callback.ReTuning != NULL); + /* retuning request */ + if (IS_USDHC_FLAG_SET(interruptFlags, kUSDHC_TuningErrorFlag)) + { + handle->callback.ReTuning(base, handle->userData); /* retuning fail */ + } +} +#endif + +static void USDHC_TransferHandleBlockGap(USDHC_Type *base, usdhc_handle_t *handle) +{ + if (handle->callback.BlockGap != NULL) + { + handle->callback.BlockGap(base, handle->userData); + } +} + +/*! + * brief Creates the USDHC handle. + * + * param base USDHC peripheral base address. + * param handle USDHC handle pointer. + * param callback Structure pointer to contain all callback functions. + * param userData Callback function parameter. + */ +void USDHC_TransferCreateHandle(USDHC_Type *base, + usdhc_handle_t *handle, + const usdhc_transfer_callback_t *callback, + void *userData) +{ + assert(handle != NULL); + assert(callback != NULL); + + /* Zero the handle. */ + (void)memset(handle, 0, sizeof(*handle)); + + /* Set the callback. */ + handle->callback.CardInserted = callback->CardInserted; + handle->callback.CardRemoved = callback->CardRemoved; + handle->callback.SdioInterrupt = callback->SdioInterrupt; + handle->callback.BlockGap = callback->BlockGap; + handle->callback.TransferComplete = callback->TransferComplete; + handle->callback.ReTuning = callback->ReTuning; + handle->userData = userData; + + /* Save the handle in global variables to support the double weak mechanism. */ + s_usdhcHandle[USDHC_GetInstance(base)] = handle; + + /* save IRQ handler */ + s_usdhcIsr = USDHC_TransferHandleIRQ; + + (void)EnableIRQ(s_usdhcIRQ[USDHC_GetInstance(base)]); +} + +/*! + * brief IRQ handler for the USDHC. + * + * This function deals with the IRQs on the given host controller. + * + * param base USDHC peripheral base address. + * param handle USDHC handle. + */ +void USDHC_TransferHandleIRQ(USDHC_Type *base, usdhc_handle_t *handle) +{ + assert(handle != NULL); + + uint32_t interruptFlags; + + interruptFlags = USDHC_GetEnabledInterruptStatusFlags(base); + + if (IS_USDHC_FLAG_SET(interruptFlags, kUSDHC_CardDetectFlag)) + { + USDHC_TransferHandleCardDetect(base, handle, interruptFlags); + } + if (IS_USDHC_FLAG_SET(interruptFlags, kUSDHC_CommandFlag)) + { + USDHC_TransferHandleCommand(base, handle, interruptFlags); + } + if (IS_USDHC_FLAG_SET(interruptFlags, kUSDHC_DataFlag)) + { + USDHC_TransferHandleData(base, handle, interruptFlags); + } + if (IS_USDHC_FLAG_SET(interruptFlags, kUSDHC_CardInterruptFlag)) + { + USDHC_TransferHandleSdioInterrupt(base, handle); + } + if (IS_USDHC_FLAG_SET(interruptFlags, kUSDHC_BlockGapEventFlag)) + { + USDHC_TransferHandleBlockGap(base, handle); + } +#if defined(FSL_FEATURE_USDHC_HAS_SDR50_MODE) && (FSL_FEATURE_USDHC_HAS_SDR50_MODE) + if (IS_USDHC_FLAG_SET(interruptFlags, kUSDHC_SDR104TuningFlag)) + { + USDHC_TransferHandleReTuning(base, handle, interruptFlags); + } +#endif + USDHC_ClearInterruptStatusFlags(base, interruptFlags); +} + +#ifdef USDHC0 +void USDHC0_DriverIRQHandler(void) +{ + s_usdhcIsr(s_usdhcBase[0U], s_usdhcHandle[0U]); + SDK_ISR_EXIT_BARRIER; +} +#endif + +#ifdef USDHC1 +void USDHC1_DriverIRQHandler(void) +{ + s_usdhcIsr(s_usdhcBase[1U], s_usdhcHandle[1U]); + SDK_ISR_EXIT_BARRIER; +} +#endif + +#ifdef USDHC2 +void USDHC2_DriverIRQHandler(void) +{ + s_usdhcIsr(s_usdhcBase[2U], s_usdhcHandle[2U]); + SDK_ISR_EXIT_BARRIER; +} + +#endif |