diff options
Diffstat (limited to '')
-rw-r--r-- | bsps/arm/imxrt/nxp/devices/MIMXRT1052/drivers/fsl_flexio_i2s_edma.c | 447 |
1 files changed, 0 insertions, 447 deletions
diff --git a/bsps/arm/imxrt/nxp/devices/MIMXRT1052/drivers/fsl_flexio_i2s_edma.c b/bsps/arm/imxrt/nxp/devices/MIMXRT1052/drivers/fsl_flexio_i2s_edma.c deleted file mode 100644 index 21e3a6ff51..0000000000 --- a/bsps/arm/imxrt/nxp/devices/MIMXRT1052/drivers/fsl_flexio_i2s_edma.c +++ /dev/null @@ -1,447 +0,0 @@ -/* - * Copyright (c) 2015, Freescale Semiconductor, Inc. - * Copyright 2016-2019 NXP - * All rights reserved. - * - * SPDX-License-Identifier: BSD-3-Clause - */ - -#include "fsl_flexio_i2s_edma.h" - -/* Component ID definition, used by tools. */ -#ifndef FSL_COMPONENT_ID -#define FSL_COMPONENT_ID "platform.drivers.flexio_i2s_edma" -#endif - -/******************************************************************************* - * Definitations - ******************************************************************************/ -/* Used for 32byte aligned */ -#define STCD_ADDR(address) (edma_tcd_t *)(((uint32_t)(address) + 32U) & ~0x1FU) - -/*<! Structure definition for flexio_i2s_edma_private_handle_t. The structure is private. */ -typedef struct _flexio_i2s_edma_private_handle -{ - FLEXIO_I2S_Type *base; - flexio_i2s_edma_handle_t *handle; -} flexio_i2s_edma_private_handle_t; - -/*!@brief _flexio_i2s_edma_transfer_state */ -enum -{ - kFLEXIO_I2S_Busy = 0x0U, /*!< FLEXIO I2S is busy */ - kFLEXIO_I2S_Idle, /*!< Transfer is done. */ -}; - -/*<! Private handle only used for internally. */ -static flexio_i2s_edma_private_handle_t s_edmaPrivateHandle[2]; - -/******************************************************************************* - * Prototypes - ******************************************************************************/ -/*! - * @brief FLEXIO I2S EDMA callback for send. - * - * @param handle pointer to flexio_i2s_edma_handle_t structure which stores the transfer state. - * @param userData Parameter for user callback. - * @param done If the DMA transfer finished. - * @param tcds The TCD index. - */ -static void FLEXIO_I2S_TxEDMACallback(edma_handle_t *handle, void *userData, bool done, uint32_t tcds); - -/*! - * @brief FLEXIO I2S EDMA callback for receive. - * - * @param handle pointer to flexio_i2s_edma_handle_t structure which stores the transfer state. - * @param userData Parameter for user callback. - * @param done If the DMA transfer finished. - * @param tcds The TCD index. - */ -static void FLEXIO_I2S_RxEDMACallback(edma_handle_t *handle, void *userData, bool done, uint32_t tcds); - -/******************************************************************************* - * Code - ******************************************************************************/ -static void FLEXIO_I2S_TxEDMACallback(edma_handle_t *handle, void *userData, bool done, uint32_t tcds) -{ - flexio_i2s_edma_private_handle_t *privHandle = (flexio_i2s_edma_private_handle_t *)userData; - flexio_i2s_edma_handle_t *flexio_i2sHandle = privHandle->handle; - - /* If finished a block, call the callback function */ - (void)memset(&flexio_i2sHandle->queue[flexio_i2sHandle->queueDriver], 0, sizeof(flexio_i2s_transfer_t)); - flexio_i2sHandle->queueDriver = (flexio_i2sHandle->queueDriver + 1U) % FLEXIO_I2S_XFER_QUEUE_SIZE; - if (flexio_i2sHandle->callback != NULL) - { - (flexio_i2sHandle->callback)(privHandle->base, flexio_i2sHandle, kStatus_Success, flexio_i2sHandle->userData); - } - - /* If all data finished, just stop the transfer */ - if (flexio_i2sHandle->queue[flexio_i2sHandle->queueDriver].data == NULL) - { - FLEXIO_I2S_TransferAbortSendEDMA(privHandle->base, flexio_i2sHandle); - } -} - -static void FLEXIO_I2S_RxEDMACallback(edma_handle_t *handle, void *userData, bool done, uint32_t tcds) -{ - flexio_i2s_edma_private_handle_t *privHandle = (flexio_i2s_edma_private_handle_t *)userData; - flexio_i2s_edma_handle_t *flexio_i2sHandle = privHandle->handle; - - /* If finished a block, call the callback function */ - (void)memset(&flexio_i2sHandle->queue[flexio_i2sHandle->queueDriver], 0, sizeof(flexio_i2s_transfer_t)); - flexio_i2sHandle->queueDriver = (flexio_i2sHandle->queueDriver + 1U) % FLEXIO_I2S_XFER_QUEUE_SIZE; - if (flexio_i2sHandle->callback != NULL) - { - (flexio_i2sHandle->callback)(privHandle->base, flexio_i2sHandle, kStatus_Success, flexio_i2sHandle->userData); - } - - /* If all data finished, just stop the transfer */ - if (flexio_i2sHandle->queue[flexio_i2sHandle->queueDriver].data == NULL) - { - FLEXIO_I2S_TransferAbortReceiveEDMA(privHandle->base, flexio_i2sHandle); - } -} - -/*! - * brief Initializes the FlexIO I2S eDMA handle. - * - * This function initializes the FlexIO I2S master DMA handle which can be used for other FlexIO I2S master - * transactional APIs. - * Usually, for a specified FlexIO I2S instance, call this API once to get the initialized handle. - * - * param base FlexIO I2S peripheral base address. - * param handle FlexIO I2S eDMA handle pointer. - * param callback FlexIO I2S eDMA callback function called while finished a block. - * param userData User parameter for callback. - * param dmaHandle eDMA handle for FlexIO I2S. This handle is a static value allocated by users. - */ -void FLEXIO_I2S_TransferTxCreateHandleEDMA(FLEXIO_I2S_Type *base, - flexio_i2s_edma_handle_t *handle, - flexio_i2s_edma_callback_t callback, - void *userData, - edma_handle_t *dmaHandle) -{ - assert((handle != NULL) && (dmaHandle != NULL)); - - /* Zero the handle. */ - (void)memset(handle, 0, sizeof(*handle)); - - /* Set flexio_i2s base to handle */ - handle->dmaHandle = dmaHandle; - handle->callback = callback; - handle->userData = userData; - - /* Set FLEXIO I2S state to idle */ - handle->state = (uint32_t)kFLEXIO_I2S_Idle; - - s_edmaPrivateHandle[0].base = base; - s_edmaPrivateHandle[0].handle = handle; - - /* Need to use scatter gather */ - EDMA_InstallTCDMemory(dmaHandle, STCD_ADDR(handle->tcd), FLEXIO_I2S_XFER_QUEUE_SIZE); - - /* Install callback for Tx dma channel */ - EDMA_SetCallback(dmaHandle, FLEXIO_I2S_TxEDMACallback, &s_edmaPrivateHandle[0]); -} - -/*! - * brief Initializes the FlexIO I2S Rx eDMA handle. - * - * This function initializes the FlexIO I2S slave DMA handle which can be used for other FlexIO I2S master transactional - * APIs. - * Usually, for a specified FlexIO I2S instance, call this API once to get the initialized handle. - * - * param base FlexIO I2S peripheral base address. - * param handle FlexIO I2S eDMA handle pointer. - * param callback FlexIO I2S eDMA callback function called while finished a block. - * param userData User parameter for callback. - * param dmaHandle eDMA handle for FlexIO I2S. This handle is a static value allocated by users. - */ -void FLEXIO_I2S_TransferRxCreateHandleEDMA(FLEXIO_I2S_Type *base, - flexio_i2s_edma_handle_t *handle, - flexio_i2s_edma_callback_t callback, - void *userData, - edma_handle_t *dmaHandle) -{ - assert((handle != NULL) && (dmaHandle != NULL)); - - /* Zero the handle. */ - (void)memset(handle, 0, sizeof(*handle)); - - /* Set flexio_i2s base to handle */ - handle->dmaHandle = dmaHandle; - handle->callback = callback; - handle->userData = userData; - - /* Set FLEXIO I2S state to idle */ - handle->state = (uint32_t)kFLEXIO_I2S_Idle; - - s_edmaPrivateHandle[1].base = base; - s_edmaPrivateHandle[1].handle = handle; - - /* Need to use scatter gather */ - EDMA_InstallTCDMemory(dmaHandle, STCD_ADDR(handle->tcd), FLEXIO_I2S_XFER_QUEUE_SIZE); - - /* Install callback for Tx dma channel */ - EDMA_SetCallback(dmaHandle, FLEXIO_I2S_RxEDMACallback, &s_edmaPrivateHandle[1]); -} - -/*! - * brief Configures the FlexIO I2S Tx audio format. - * - * Audio format can be changed in run-time of FlexIO I2S. This function configures the sample rate and audio data - * format to be transferred. This function also sets the eDMA parameter according to format. - * - * param base FlexIO I2S peripheral base address. - * param handle FlexIO I2S eDMA handle pointer - * param format Pointer to FlexIO I2S audio data format structure. - * param srcClock_Hz FlexIO I2S clock source frequency in Hz, it should be 0 while in slave mode. - * retval kStatus_Success Audio format set successfully. - * retval kStatus_InvalidArgument The input arguments is invalid. - */ -void FLEXIO_I2S_TransferSetFormatEDMA(FLEXIO_I2S_Type *base, - flexio_i2s_edma_handle_t *handle, - flexio_i2s_format_t *format, - uint32_t srcClock_Hz) -{ - assert((handle != NULL) && (format != NULL)); - - /* Configure the audio format to FLEXIO I2S registers */ - if (srcClock_Hz != 0UL) - { - /* It is master */ - FLEXIO_I2S_MasterSetFormat(base, format, srcClock_Hz); - } - else - { - FLEXIO_I2S_SlaveSetFormat(base, format); - } - - /* Get the transfer size from format, this should be used in EDMA configuration */ - handle->bytesPerFrame = format->bitWidth / 8U; -} - -/*! - * brief Performs a non-blocking FlexIO I2S transfer using DMA. - * - * note This interface returned immediately after transfer initiates. Users should call - * FLEXIO_I2S_GetTransferStatus to poll the transfer status and check whether the FlexIO I2S transfer is finished. - * - * param base FlexIO I2S peripheral base address. - * param handle FlexIO I2S DMA handle pointer. - * param xfer Pointer to DMA transfer structure. - * retval kStatus_Success Start a FlexIO I2S eDMA send successfully. - * retval kStatus_InvalidArgument The input arguments is invalid. - * retval kStatus_TxBusy FlexIO I2S is busy sending data. - */ -status_t FLEXIO_I2S_TransferSendEDMA(FLEXIO_I2S_Type *base, - flexio_i2s_edma_handle_t *handle, - flexio_i2s_transfer_t *xfer) -{ - assert((handle != NULL) && (xfer != NULL)); - - edma_transfer_config_t config = {0}; - uint32_t destAddr = FLEXIO_I2S_TxGetDataRegisterAddress(base) + (4UL - handle->bytesPerFrame); - - /* Check if input parameter invalid */ - if ((xfer->data == NULL) || (xfer->dataSize == 0U)) - { - return kStatus_InvalidArgument; - } - - if (handle->queue[handle->queueUser].data != NULL) - { - return kStatus_FLEXIO_I2S_QueueFull; - } - - /* Change the state of handle */ - handle->state = (uint32_t)kFLEXIO_I2S_Busy; - - /* Update the queue state */ - handle->queue[handle->queueUser].data = xfer->data; - handle->queue[handle->queueUser].dataSize = xfer->dataSize; - handle->transferSize[handle->queueUser] = xfer->dataSize; - handle->queueUser = (handle->queueUser + 1U) % FLEXIO_I2S_XFER_QUEUE_SIZE; - - /* Prepare edma configure */ - EDMA_PrepareTransfer(&config, xfer->data, handle->bytesPerFrame, (uint32_t *)destAddr, handle->bytesPerFrame, - handle->bytesPerFrame, xfer->dataSize, kEDMA_MemoryToPeripheral); - - /* Store the initially configured eDMA minor byte transfer count into the FLEXIO I2S handle */ - handle->nbytes = handle->bytesPerFrame; - - (void)EDMA_SubmitTransfer(handle->dmaHandle, &config); - - /* Start DMA transfer */ - EDMA_StartTransfer(handle->dmaHandle); - - /* Enable DMA enable bit */ - FLEXIO_I2S_TxEnableDMA(base, true); - - /* Enable FLEXIO I2S Tx clock */ - FLEXIO_I2S_Enable(base, true); - - return kStatus_Success; -} - -/*! - * brief Performs a non-blocking FlexIO I2S receive using eDMA. - * - * note This interface returned immediately after transfer initiates. Users should call - * FLEXIO_I2S_GetReceiveRemainingBytes to poll the transfer status and check whether the FlexIO I2S transfer is - * finished. - * - * param base FlexIO I2S peripheral base address. - * param handle FlexIO I2S DMA handle pointer. - * param xfer Pointer to DMA transfer structure. - * retval kStatus_Success Start a FlexIO I2S eDMA receive successfully. - * retval kStatus_InvalidArgument The input arguments is invalid. - * retval kStatus_RxBusy FlexIO I2S is busy receiving data. - */ -status_t FLEXIO_I2S_TransferReceiveEDMA(FLEXIO_I2S_Type *base, - flexio_i2s_edma_handle_t *handle, - flexio_i2s_transfer_t *xfer) -{ - assert((handle != NULL) && (xfer != NULL)); - - edma_transfer_config_t config = {0}; - uint32_t srcAddr = FLEXIO_I2S_RxGetDataRegisterAddress(base); - - /* Check if input parameter invalid */ - if ((xfer->data == NULL) || (xfer->dataSize == 0U)) - { - return kStatus_InvalidArgument; - } - - if (handle->queue[handle->queueUser].data != NULL) - { - return kStatus_FLEXIO_I2S_QueueFull; - } - - /* Change the state of handle */ - handle->state = (uint32_t)kFLEXIO_I2S_Busy; - - /* Update queue state */ - handle->queue[handle->queueUser].data = xfer->data; - handle->queue[handle->queueUser].dataSize = xfer->dataSize; - handle->transferSize[handle->queueUser] = xfer->dataSize; - handle->queueUser = (handle->queueUser + 1U) % FLEXIO_I2S_XFER_QUEUE_SIZE; - - /* Prepare edma configure */ - EDMA_PrepareTransfer(&config, (uint32_t *)srcAddr, handle->bytesPerFrame, xfer->data, handle->bytesPerFrame, - handle->bytesPerFrame, xfer->dataSize, kEDMA_PeripheralToMemory); - - /* Store the initially configured eDMA minor byte transfer count into the FLEXIO I2S handle */ - handle->nbytes = handle->bytesPerFrame; - - (void)EDMA_SubmitTransfer(handle->dmaHandle, &config); - - /* Start DMA transfer */ - EDMA_StartTransfer(handle->dmaHandle); - - /* Enable DMA enable bit */ - FLEXIO_I2S_RxEnableDMA(base, true); - - /* Enable FLEXIO I2S Rx clock */ - FLEXIO_I2S_Enable(base, true); - - return kStatus_Success; -} - -/*! - * brief Aborts a FlexIO I2S transfer using eDMA. - * - * param base FlexIO I2S peripheral base address. - * param handle FlexIO I2S DMA handle pointer. - */ -void FLEXIO_I2S_TransferAbortSendEDMA(FLEXIO_I2S_Type *base, flexio_i2s_edma_handle_t *handle) -{ - assert(handle != NULL); - - /* Disable dma */ - EDMA_AbortTransfer(handle->dmaHandle); - - /* Disable DMA enable bit */ - FLEXIO_I2S_TxEnableDMA(base, false); - - /* Set the handle state */ - handle->state = (uint32_t)kFLEXIO_I2S_Idle; -} - -/*! - * brief Aborts a FlexIO I2S receive using eDMA. - * - * param base FlexIO I2S peripheral base address. - * param handle FlexIO I2S DMA handle pointer. - */ -void FLEXIO_I2S_TransferAbortReceiveEDMA(FLEXIO_I2S_Type *base, flexio_i2s_edma_handle_t *handle) -{ - assert(handle != NULL); - - /* Disable dma */ - EDMA_AbortTransfer(handle->dmaHandle); - - /* Disable DMA enable bit */ - FLEXIO_I2S_RxEnableDMA(base, false); - - /* Set the handle state */ - handle->state = (uint32_t)kFLEXIO_I2S_Idle; -} - -/*! - * brief Gets the remaining bytes to be sent. - * - * param base FlexIO I2S peripheral base address. - * param handle FlexIO I2S DMA handle pointer. - * param count Bytes sent. - * retval kStatus_Success Succeed get the transfer count. - * retval kStatus_NoTransferInProgress There is not a non-blocking transaction currently in progress. - */ -status_t FLEXIO_I2S_TransferGetSendCountEDMA(FLEXIO_I2S_Type *base, flexio_i2s_edma_handle_t *handle, size_t *count) -{ - assert(handle != NULL); - - status_t status = kStatus_Success; - - if (handle->state != (uint32_t)kFLEXIO_I2S_Busy) - { - status = kStatus_NoTransferInProgress; - } - else - { - *count = handle->transferSize[handle->queueDriver] - - (uint32_t)handle->nbytes * - EDMA_GetRemainingMajorLoopCount(handle->dmaHandle->base, handle->dmaHandle->channel); - } - - return status; -} - -/*! - * brief Get the remaining bytes to be received. - * - * param base FlexIO I2S peripheral base address. - * param handle FlexIO I2S DMA handle pointer. - * param count Bytes received. - * retval kStatus_Success Succeed get the transfer count. - * retval kStatus_NoTransferInProgress There is not a non-blocking transaction currently in progress. - */ -status_t FLEXIO_I2S_TransferGetReceiveCountEDMA(FLEXIO_I2S_Type *base, flexio_i2s_edma_handle_t *handle, size_t *count) -{ - assert(handle != NULL); - - status_t status = kStatus_Success; - - if (handle->state != (uint32_t)kFLEXIO_I2S_Busy) - { - status = kStatus_NoTransferInProgress; - } - else - { - *count = handle->transferSize[handle->queueDriver] - - (uint32_t)handle->nbytes * - EDMA_GetRemainingMajorLoopCount(handle->dmaHandle->base, handle->dmaHandle->channel); - } - - return status; -} |