diff options
Diffstat (limited to '')
-rw-r--r-- | bsps/arm/imxrt/nxp/devices/MIMXRT1052/drivers/fsl_dcdc.c | 534 |
1 files changed, 534 insertions, 0 deletions
diff --git a/bsps/arm/imxrt/nxp/devices/MIMXRT1052/drivers/fsl_dcdc.c b/bsps/arm/imxrt/nxp/devices/MIMXRT1052/drivers/fsl_dcdc.c new file mode 100644 index 0000000000..fa290939bd --- /dev/null +++ b/bsps/arm/imxrt/nxp/devices/MIMXRT1052/drivers/fsl_dcdc.c @@ -0,0 +1,534 @@ +/* + * Copyright 2017-2019, NXP + * All rights reserved. + * + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#include "fsl_dcdc.h" + +/* Component ID definition, used by tools. */ +#ifndef FSL_COMPONENT_ID +#define FSL_COMPONENT_ID "platform.drivers.dcdc_1" +#endif + +/******************************************************************************* + * Prototypes + ******************************************************************************/ +/*! + * @brief Get instance number for DCDC module. + * + * @param base DCDC peripheral base address + */ +static uint32_t DCDC_GetInstance(DCDC_Type *base); + +/******************************************************************************* + * Variables + ******************************************************************************/ +/*! @brief Pointers to DCDC bases for each instance. */ +static DCDC_Type *const s_dcdcBases[] = DCDC_BASE_PTRS; + +#if !(defined(FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL) && FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL) +/*! @brief Pointers to DCDC clocks for each instance. */ +static const clock_ip_name_t s_dcdcClocks[] = DCDC_CLOCKS; +#endif /* FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL */ + +/******************************************************************************* + * Code + ******************************************************************************/ +static uint32_t DCDC_GetInstance(DCDC_Type *base) +{ + uint32_t instance; + + /* Find the instance index from base address mappings. */ + for (instance = 0; instance < ARRAY_SIZE(s_dcdcBases); instance++) + { + if (s_dcdcBases[instance] == base) + { + break; + } + } + + assert(instance < ARRAY_SIZE(s_dcdcBases)); + + return instance; +} + +/*! + * brief Enable the access to DCDC registers. + * + * param base DCDC peripheral base address. + */ +void DCDC_Init(DCDC_Type *base) +{ +#if !(defined(FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL) && FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL) + /* Enable the clock. */ + CLOCK_EnableClock(s_dcdcClocks[DCDC_GetInstance(base)]); +#endif /* FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL */ +} + +/*! + * brief Disable the access to DCDC registers. + * + * param base DCDC peripheral base address. + */ +void DCDC_Deinit(DCDC_Type *base) +{ +#if !(defined(FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL) && FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL) + /* Disable the clock. */ + CLOCK_DisableClock(s_dcdcClocks[DCDC_GetInstance(base)]); +#endif /* FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL */ +} + +/*! + * brief Configure the DCDC clock source. + * + * param base DCDC peripheral base address. + * param clockSource Clock source for DCDC. See to "dcdc_clock_source_t". + */ +void DCDC_SetClockSource(DCDC_Type *base, dcdc_clock_source_t clockSource) +{ + uint32_t tmp32; + + /* Configure the DCDC_REG0 register. */ + tmp32 = base->REG0 & ~(DCDC_REG0_XTAL_24M_OK_MASK | DCDC_REG0_DISABLE_AUTO_CLK_SWITCH_MASK | + DCDC_REG0_SEL_CLK_MASK | DCDC_REG0_PWD_OSC_INT_MASK); + switch (clockSource) + { + case kDCDC_ClockInternalOsc: + tmp32 |= DCDC_REG0_DISABLE_AUTO_CLK_SWITCH_MASK; + break; + case kDCDC_ClockExternalOsc: + /* Choose the external clock and disable the internal clock. */ + tmp32 |= DCDC_REG0_DISABLE_AUTO_CLK_SWITCH_MASK | DCDC_REG0_SEL_CLK_MASK | DCDC_REG0_PWD_OSC_INT_MASK; + break; + case kDCDC_ClockAutoSwitch: + /* Set to switch from internal ring osc to xtal 24M if auto mode is enabled. */ + tmp32 |= DCDC_REG0_XTAL_24M_OK_MASK; + break; + default: + assert(false); + break; + } + base->REG0 = tmp32; +} + +/*! + * brief Get the default setting for detection configuration. + * + * The default configuration are set according to responding registers' setting when powered on. + * They are: + * code + * config->enableXtalokDetection = false; + * config->powerDownOverVoltageDetection = true; + * config->powerDownLowVlotageDetection = false; + * config->powerDownOverCurrentDetection = true; + * config->powerDownPeakCurrentDetection = true; + * config->powerDownZeroCrossDetection = true; + * config->OverCurrentThreshold = kDCDC_OverCurrentThresholdAlt0; + * config->PeakCurrentThreshold = kDCDC_PeakCurrentThresholdAlt0; + * endcode + * + * param config Pointer to configuration structure. See to "dcdc_detection_config_t" + */ +void DCDC_GetDefaultDetectionConfig(dcdc_detection_config_t *config) +{ + assert(NULL != config); + + /* Initializes the configure structure to zero. */ + (void)memset(config, 0, sizeof(*config)); + + config->enableXtalokDetection = false; + config->powerDownOverVoltageDetection = true; + config->powerDownLowVlotageDetection = false; + config->powerDownOverCurrentDetection = true; + config->powerDownPeakCurrentDetection = true; + config->powerDownZeroCrossDetection = true; + config->OverCurrentThreshold = kDCDC_OverCurrentThresholdAlt0; + config->PeakCurrentThreshold = kDCDC_PeakCurrentThresholdAlt0; +} + +/*! + * breif Configure the DCDC detection. + * + * param base DCDC peripheral base address. + * param config Pointer to configuration structure. See to "dcdc_detection_config_t" + */ +void DCDC_SetDetectionConfig(DCDC_Type *base, const dcdc_detection_config_t *config) +{ + assert(NULL != config); + + uint32_t tmp32; + /* Configure the DCDC_REG0 register. */ + tmp32 = base->REG0 & + ~(DCDC_REG0_XTALOK_DISABLE_MASK | DCDC_REG0_PWD_HIGH_VOLT_DET_MASK | DCDC_REG0_PWD_CMP_BATT_DET_MASK | + DCDC_REG0_PWD_OVERCUR_DET_MASK | DCDC_REG0_PWD_CUR_SNS_CMP_MASK | DCDC_REG0_PWD_ZCD_MASK | + DCDC_REG0_CUR_SNS_THRSH_MASK | DCDC_REG0_OVERCUR_TRIG_ADJ_MASK); + + tmp32 |= DCDC_REG0_CUR_SNS_THRSH(config->PeakCurrentThreshold) | + DCDC_REG0_OVERCUR_TRIG_ADJ(config->OverCurrentThreshold); + if (false == config->enableXtalokDetection) + { + tmp32 |= DCDC_REG0_XTALOK_DISABLE_MASK; + } + if (config->powerDownOverVoltageDetection) + { + tmp32 |= DCDC_REG0_PWD_HIGH_VOLT_DET_MASK; + } + if (config->powerDownLowVlotageDetection) + { + tmp32 |= DCDC_REG0_PWD_CMP_BATT_DET_MASK; + } + if (config->powerDownOverCurrentDetection) + { + tmp32 |= DCDC_REG0_PWD_OVERCUR_DET_MASK; + } + if (config->powerDownPeakCurrentDetection) + { + tmp32 |= DCDC_REG0_PWD_CUR_SNS_CMP_MASK; + } + if (config->powerDownZeroCrossDetection) + { + tmp32 |= DCDC_REG0_PWD_ZCD_MASK; + } + base->REG0 = tmp32; +} + +/*! + * brief Get the default setting for low power configuration. + * + * The default configuration are set according to responding registers' setting when powered on. + * They are: + * code + * config->enableOverloadDetection = true; + * config->enableAdjustHystereticValue = false; + * config->countChargingTimePeriod = kDCDC_CountChargingTimePeriod8Cycle; + * config->countChargingTimeThreshold = kDCDC_CountChargingTimeThreshold32; + * endcode + * + * param config Pointer to configuration structure. See to "dcdc_low_power_config_t" + */ +void DCDC_GetDefaultLowPowerConfig(dcdc_low_power_config_t *config) +{ + assert(NULL != config); + + /* Initializes the configure structure to zero. */ + (void)memset(config, 0, sizeof(*config)); + + config->enableOverloadDetection = true; + config->enableAdjustHystereticValue = false; + config->countChargingTimePeriod = kDCDC_CountChargingTimePeriod8Cycle; + config->countChargingTimeThreshold = kDCDC_CountChargingTimeThreshold32; +} + +/*! + * brief Configure the DCDC low power. + * + * param base DCDC peripheral base address. + * param config Pointer to configuration structure. See to "dcdc_low_power_config_t". + */ +void DCDC_SetLowPowerConfig(DCDC_Type *base, const dcdc_low_power_config_t *config) +{ + assert(NULL != config); + + uint32_t tmp32; + /* Configure the DCDC_REG0 register. */ + tmp32 = base->REG0 & ~(DCDC_REG0_EN_LP_OVERLOAD_SNS_MASK | DCDC_REG0_LP_HIGH_HYS_MASK | + DCDC_REG0_LP_OVERLOAD_FREQ_SEL_MASK | DCDC_REG0_LP_OVERLOAD_THRSH_MASK); + tmp32 |= DCDC_REG0_LP_OVERLOAD_FREQ_SEL(config->countChargingTimePeriod) | + DCDC_REG0_LP_OVERLOAD_THRSH(config->countChargingTimeThreshold); + if (config->enableOverloadDetection) + { + tmp32 |= DCDC_REG0_EN_LP_OVERLOAD_SNS_MASK; + } + if (config->enableAdjustHystereticValue) + { + tmp32 |= DCDC_REG0_LP_HIGH_HYS_MASK; + } + base->REG0 = tmp32; +} + +/*! + * brief Get DCDC status flags. + * + * param base peripheral base address. + * return Mask of asserted status flags. See to "_dcdc_status_flags_t". + */ +uint32_t DCDC_GetstatusFlags(DCDC_Type *base) +{ + uint32_t tmp32 = 0U; + + if (DCDC_REG0_STS_DC_OK_MASK == (DCDC_REG0_STS_DC_OK_MASK & base->REG0)) + { + tmp32 |= (uint32_t)kDCDC_LockedOKStatus; + } + + return tmp32; +} + +/*! + * brief Reset current alert signal. Alert signal is generate by peak current detection. + * + * param base DCDC peripheral base address. + * param enable Switcher to reset signal. True means reset signal. False means don't reset signal. + */ +void DCDC_ResetCurrentAlertSignal(DCDC_Type *base, bool enable) +{ + if (enable) + { + base->REG0 |= DCDC_REG0_CURRENT_ALERT_RESET_MASK; + } + else + { + base->REG0 &= ~DCDC_REG0_CURRENT_ALERT_RESET_MASK; + } +} + +/*! + * brief Get the default setting for loop control configuration. + * + * The default configuration are set according to responding registers' setting when powered on. + * They are: + * code + * config->enableCommonHysteresis = false; + * config->enableCommonThresholdDetection = false; + * config->enableInvertHysteresisSign = false; + * config->enableRCThresholdDetection = false; + * config->enableRCScaleCircuit = 0U; + * config->complementFeedForwardStep = 0U; + * config->controlParameterMagnitude = 2U; + * config->integralProportionalRatio = 2U; + * endcode + * + * param config Pointer to configuration structure. See to "dcdc_loop_control_config_t" + */ +void DCDC_GetDefaultLoopControlConfig(dcdc_loop_control_config_t *config) +{ + assert(NULL != config); + + /* Initializes the configure structure to zero. */ + (void)memset(config, 0, sizeof(*config)); + + config->enableCommonHysteresis = false; + config->enableCommonThresholdDetection = false; + config->enableInvertHysteresisSign = false; + config->enableRCThresholdDetection = false; + config->enableRCScaleCircuit = 0U; + config->complementFeedForwardStep = 0U; + config->controlParameterMagnitude = 2U; + config->integralProportionalRatio = 2U; +} + +/*! + * brief Configure the DCDC loop control. + * + * param base DCDC peripheral base address. + * param config Pointer to configuration structure. See to "dcdc_loop_control_config_t". + */ +void DCDC_SetLoopControlConfig(DCDC_Type *base, const dcdc_loop_control_config_t *config) +{ + assert(NULL != config); + + uint32_t tmp32; + + /* Configure the DCDC_REG1 register. */ + tmp32 = base->REG1 & ~(DCDC_REG1_LOOPCTRL_EN_HYST_MASK | DCDC_REG1_LOOPCTRL_HST_THRESH_MASK); + if (config->enableCommonHysteresis) + { + tmp32 |= DCDC_REG1_LOOPCTRL_EN_HYST_MASK; + } + if (config->enableCommonThresholdDetection) + { + tmp32 |= DCDC_REG1_LOOPCTRL_HST_THRESH_MASK; + } + base->REG1 = tmp32; + + /* configure the DCDC_REG2 register. */ + tmp32 = base->REG2 & ~(DCDC_REG2_LOOPCTRL_HYST_SIGN_MASK | DCDC_REG2_LOOPCTRL_RCSCALE_THRSH_MASK | + DCDC_REG2_LOOPCTRL_EN_RCSCALE_MASK | DCDC_REG2_LOOPCTRL_DC_FF_MASK | + DCDC_REG2_LOOPCTRL_DC_R_MASK | DCDC_REG2_LOOPCTRL_DC_C_MASK); + tmp32 |= DCDC_REG2_LOOPCTRL_DC_FF(config->complementFeedForwardStep) | + DCDC_REG2_LOOPCTRL_DC_R(config->controlParameterMagnitude) | + DCDC_REG2_LOOPCTRL_DC_C(config->integralProportionalRatio) | + DCDC_REG2_LOOPCTRL_EN_RCSCALE(config->enableRCScaleCircuit); + if (config->enableInvertHysteresisSign) + { + tmp32 |= DCDC_REG2_LOOPCTRL_HYST_SIGN_MASK; + } + if (config->enableRCThresholdDetection) + { + tmp32 |= DCDC_REG2_LOOPCTRL_RCSCALE_THRSH_MASK; + } + base->REG2 = tmp32; +} + +/*! + * brief Configure for the min power. + * + * param base DCDC peripheral base address. + * param config Pointer to configuration structure. See to "dcdc_min_power_config_t". + */ +void DCDC_SetMinPowerConfig(DCDC_Type *base, const dcdc_min_power_config_t *config) +{ + assert(NULL != config); + + uint32_t tmp32; + + tmp32 = base->REG3 & ~DCDC_REG3_MINPWR_DC_HALFCLK_MASK; + if (config->enableUseHalfFreqForContinuous) + { + tmp32 |= DCDC_REG3_MINPWR_DC_HALFCLK_MASK; + } + base->REG3 = tmp32; +} + +/*! + * brief Adjust the target voltage of VDD_SOC in run mode and low power mode. + * @deprecated Do not use this function. It has been superceded by @ref DCDC_AdjustRunTargetVoltage + * and @ref DCDC_AdjustLowPowerTargetVoltage + * + * This function is to adjust the target voltage of DCDC output. Change them and finally wait until the output is + * stabled. + * Set the target value of run mode the same as low power mode before entering power save mode, because DCDC will switch + * back to run mode if it detects the current loading is larger than about 50 mA(typical value). + * + * param base DCDC peripheral base address. + * param VDDRun Target value in run mode. 25 mV each step from 0x00 to 0x1F. 00 is for 0.8V, 0x1F is for 1.575V. + * param VDDStandby Target value in low power mode. 25 mV each step from 0x00 to 0x4. 00 is for 0.9V, 0x4 is for 1.0V. + */ +void DCDC_AdjustTargetVoltage(DCDC_Type *base, uint32_t VDDRun, uint32_t VDDStandby) +{ + uint32_t tmp32; + + /* Unlock the step for the output. */ + base->REG3 &= ~DCDC_REG3_DISABLE_STEP_MASK; + + /* Configure the DCDC_REG3 register. */ + tmp32 = base->REG3 & ~(DCDC_REG3_TARGET_LP_MASK | DCDC_REG3_TRG_MASK); + + tmp32 |= DCDC_REG3_TARGET_LP(VDDStandby) | DCDC_REG3_TRG(VDDRun); + base->REG3 = tmp32; + + /* DCDC_STS_DC_OK bit will be de-asserted after target register changes. After output voltage settling to new + * target value, DCDC_STS_DC_OK will be asserted. */ + while (DCDC_REG0_STS_DC_OK_MASK != (DCDC_REG0_STS_DC_OK_MASK & base->REG0)) + { + } +} + +/*! + * brief Adjust the target voltage of VDD_SOC in run mode. + * + * This function is to adjust the target voltage of DCDC output. Change them and finally wait until the output is + * stabled. + * Set the target value of run mode the same as low power mode before entering power save mode, because DCDC will switch + * back to run mode if it detects the current loading is larger than about 50 mA(typical value). + * + * param base DCDC peripheral base address. + * param VDDRun Target value in run mode. 25 mV each step from 0x00 to 0x1F. 00 is for 0.8V, 0x1F is for 1.575V. + */ +void DCDC_AdjustRunTargetVoltage(DCDC_Type *base, uint32_t VDDRun) +{ + uint32_t tmp32; + + /* Unlock the step for the output. */ + base->REG3 &= ~DCDC_REG3_DISABLE_STEP_MASK; + + /* Configure the DCDC_REG3 register. */ + tmp32 = base->REG3 & ~DCDC_REG3_TRG_MASK; + + tmp32 |= DCDC_REG3_TRG(VDDRun); + base->REG3 = tmp32; + + /* DCDC_STS_DC_OK bit will be de-asserted after target register changes. After output voltage settling to new + * target value, DCDC_STS_DC_OK will be asserted. */ + while (DCDC_REG0_STS_DC_OK_MASK != (DCDC_REG0_STS_DC_OK_MASK & base->REG0)) + { + } +} + +/*! + * brief Adjust the target voltage of VDD_SOC in low power mode. + * + * This function is to adjust the target voltage of DCDC output. Change them and finally wait until the output is + * stabled. + * Set the target value of run mode the same as low power mode before entering power save mode, because DCDC will switch + * back to run mode if it detects the current loading is larger than about 50 mA(typical value). + * + * param base DCDC peripheral base address. + * param VDDStandby Target value in low power mode. 25 mV each step from 0x00 to 0x4. 00 is for 0.9V, 0x4 is for 1.0V. + */ +void DCDC_AdjustLowPowerTargetVoltage(DCDC_Type *base, uint32_t VDDStandby) +{ + uint32_t tmp32; + + /* Unlock the step for the output. */ + base->REG3 &= ~DCDC_REG3_DISABLE_STEP_MASK; + + /* Configure the DCDC_REG3 register. */ + tmp32 = base->REG3 & ~DCDC_REG3_TARGET_LP_MASK; + + tmp32 |= DCDC_REG3_TARGET_LP(VDDStandby); + base->REG3 = tmp32; + + /* DCDC_STS_DC_OK bit will be de-asserted after target register changes. After output voltage settling to new + * target value, DCDC_STS_DC_OK will be asserted. */ + while (DCDC_REG0_STS_DC_OK_MASK != (DCDC_REG0_STS_DC_OK_MASK & base->REG0)) + { + } +} + +/*! + * brief Configure the DCDC internal regulator. + * + * param base DCDC peripheral base address. + * param config Pointer to configuration structure. See to "dcdc_internal_regulator_config_t". + */ +void DCDC_SetInternalRegulatorConfig(DCDC_Type *base, const dcdc_internal_regulator_config_t *config) +{ + assert(NULL != config); + + uint32_t tmp32; + + /* Configure the DCDC_REG1 register. */ + tmp32 = base->REG1 & ~(DCDC_REG1_REG_FBK_SEL_MASK | DCDC_REG1_REG_RLOAD_SW_MASK); + tmp32 |= DCDC_REG1_REG_FBK_SEL(config->feedbackPoint); + if (config->enableLoadResistor) + { + tmp32 |= DCDC_REG1_REG_RLOAD_SW_MASK; + } + base->REG1 = tmp32; +} + +/*! + * brief Boot DCDC into DCM(discontinous conduction mode). + * + * pwd_zcd=0x0; + * pwd_cmp_offset=0x0; + * dcdc_loopctrl_en_rcscale=0x3 or 0x5; + * DCM_set_ctrl=1'b1; + * + * param base DCDC peripheral base address. + */ +void DCDC_BootIntoDCM(DCDC_Type *base) +{ + base->REG0 &= ~(DCDC_REG0_PWD_ZCD_MASK | DCDC_REG0_PWD_CMP_OFFSET_MASK); + base->REG2 = (~DCDC_REG2_LOOPCTRL_EN_RCSCALE_MASK & base->REG2) | DCDC_REG2_LOOPCTRL_EN_RCSCALE(0x4U) | + DCDC_REG2_DCM_SET_CTRL_MASK; +} + +/*! + * brief Boot DCDC into CCM(continous conduction mode). + * + * pwd_zcd=0x1; + * pwd_cmp_offset=0x0; + * dcdc_loopctrl_en_rcscale=0x3; + * + * param base DCDC peripheral base address. + */ +void DCDC_BootIntoCCM(DCDC_Type *base) +{ + base->REG0 = (~DCDC_REG0_PWD_CMP_OFFSET_MASK & base->REG0) | DCDC_REG0_PWD_ZCD_MASK; + base->REG2 = (~DCDC_REG2_LOOPCTRL_EN_RCSCALE_MASK & base->REG2) | DCDC_REG2_LOOPCTRL_EN_RCSCALE(0x3U); +} |