diff options
Diffstat (limited to '')
-rw-r--r-- | bsps/arm/imxrt/mcux-sdk/drivers/usdhc/fsl_usdhc.c | 2480 | ||||
-rw-r--r-- | bsps/arm/imxrt/mcux-sdk/drivers/usdhc/fsl_usdhc.h | 1703 |
2 files changed, 4183 insertions, 0 deletions
diff --git a/bsps/arm/imxrt/mcux-sdk/drivers/usdhc/fsl_usdhc.c b/bsps/arm/imxrt/mcux-sdk/drivers/usdhc/fsl_usdhc.c new file mode 100644 index 0000000000..f2c82d8cde --- /dev/null +++ b/bsps/arm/imxrt/mcux-sdk/drivers/usdhc/fsl_usdhc.c @@ -0,0 +1,2480 @@ +/* + * Copyright (c) 2016, Freescale Semiconductor, Inc. + * Copyright 2016-2021 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#include "fsl_usdhc.h" +#if defined(FSL_SDK_ENABLE_DRIVER_CACHE_CONTROL) && FSL_SDK_ENABLE_DRIVER_CACHE_CONTROL +#include "fsl_cache.h" +#endif /* FSL_SDK_ENABLE_DRIVER_CACHE_CONTROL */ +#if defined(FSL_FEATURE_MEMORY_HAS_ADDRESS_OFFSET) && FSL_FEATURE_MEMORY_HAS_ADDRESS_OFFSET +#include "fsl_memory.h" +#endif +/******************************************************************************* + * Definitions + ******************************************************************************/ + +/* Component ID definition, used by tools. */ +#ifndef FSL_COMPONENT_ID +#define FSL_COMPONENT_ID "platform.drivers.usdhc" +#endif + +/*! @brief Clock setting */ +/* Max SD clock divisor from base clock */ +#define USDHC_MAX_DVS ((USDHC_SYS_CTRL_DVS_MASK >> USDHC_SYS_CTRL_DVS_SHIFT) + 1U) +#define USDHC_MAX_CLKFS ((USDHC_SYS_CTRL_SDCLKFS_MASK >> USDHC_SYS_CTRL_SDCLKFS_SHIFT) + 1U) +#define USDHC_PREV_DVS(x) ((x) -= 1U) +#define USDHC_PREV_CLKFS(x, y) ((x) >>= (y)) +/*! @brief USDHC ADMA table address align size */ +#define USDHC_ADMA_TABLE_ADDRESS_ALIGN (4U) + +/* Typedef for interrupt handler. */ +typedef void (*usdhc_isr_t)(USDHC_Type *base, usdhc_handle_t *handle); +/*! @brief check flag avalibility */ +#define IS_USDHC_FLAG_SET(reg, flag) (((reg) & ((uint32_t)flag)) != 0UL) + +/*! @brief usdhc transfer flags */ +enum _usdhc_transfer_flags +{ + kUSDHC_CommandOnly = 1U, /*!< transfer command only */ + kUSDHC_CommandAndTxData = 2U, /*!< transfer command and transmit data */ + kUSDHC_CommandAndRxData = 4U, /*!< transfer command and receive data */ + kUSDHC_DataWithAutoCmd12 = 8U, /*!< transfer data with auto cmd12 enabled */ + kUSDHC_DataWithAutoCmd23 = 16U, /*!< transfer data with auto cmd23 enabled */ + kUSDHC_BootData = 32U, /*!< transfer boot data */ + kUSDHC_BootDataContinuous = 64U, /*!< transfer boot data continuous */ +}; + +#if defined(FSL_FEATURE_MEMORY_HAS_ADDRESS_OFFSET) && FSL_FEATURE_MEMORY_HAS_ADDRESS_OFFSET +#define USDHC_ADDR_CPU_2_DMA(addr) (MEMORY_ConvertMemoryMapAddress((addr), kMEMORY_Local2DMA)) +#else +#define USDHC_ADDR_CPU_2_DMA(addr) (addr) +#endif +/******************************************************************************* + * Prototypes + ******************************************************************************/ +/*! + * @brief Get the instance. + * + * @param base USDHC peripheral base address. + * @return Instance number. + */ +static uint32_t USDHC_GetInstance(USDHC_Type *base); + +/*! + * @brief Start transfer according to current transfer state + * + * @param base USDHC peripheral base address. + * @param transferFlags transfer flags, @ref _usdhc_transfer_flags. + * @param blockSize block size. + * @param blockCount block count. + */ +static status_t USDHC_SetTransferConfig(USDHC_Type *base, + uint32_t transferFlags, + size_t blockSize, + uint32_t blockCount); + +/*! + * @brief Receive command response + * + * @param base USDHC peripheral base address. + * @param command Command to be sent. + */ +static status_t USDHC_ReceiveCommandResponse(USDHC_Type *base, usdhc_command_t *command); + +/*! + * @brief Read DATAPORT when buffer enable bit is set. + * + * @param base USDHC peripheral base address. + * @param data Data to be read. + * @param transferredWords The number of data words have been transferred last time transaction. + * @return The number of total data words have been transferred after this time transaction. + */ +static uint32_t USDHC_ReadDataPort(USDHC_Type *base, usdhc_data_t *data, uint32_t transferredWords); + +/*! + * @brief Read data by using DATAPORT polling way. + * + * @param base USDHC peripheral base address. + * @param data Data to be read. + * @retval kStatus_Fail Read DATAPORT failed. + * @retval kStatus_Success Operate successfully. + */ +static status_t USDHC_ReadByDataPortBlocking(USDHC_Type *base, usdhc_data_t *data); + +/*! + * @brief Write DATAPORT when buffer enable bit is set. + * + * @param base USDHC peripheral base address. + * @param data Data to be read. + * @param transferredWords The number of data words have been transferred last time. + * @return The number of total data words have been transferred after this time transaction. + */ +static uint32_t USDHC_WriteDataPort(USDHC_Type *base, usdhc_data_t *data, uint32_t transferredWords); + +/*! + * @brief Write data by using DATAPORT polling way. + * + * @param base USDHC peripheral base address. + * @param data Data to be transferred. + * @retval kStatus_Fail Write DATAPORT failed. + * @retval kStatus_Success Operate successfully. + */ +static status_t USDHC_WriteByDataPortBlocking(USDHC_Type *base, usdhc_data_t *data); + +/*! + * @brief Transfer data by polling way. + * + * @param base USDHC peripheral base address. + * @param data Data to be transferred. + * @param use DMA flag. + * @retval kStatus_Fail Transfer data failed. + * @retval kStatus_InvalidArgument Argument is invalid. + * @retval kStatus_Success Operate successfully. + */ +static status_t USDHC_TransferDataBlocking(USDHC_Type *base, usdhc_data_t *data, bool enDMA); + +/*! + * @brief wait command done + * + * @param base USDHC peripheral base address. + * @param command configuration + * @param pollingCmdDone polling command done flag + */ +static status_t USDHC_WaitCommandDone(USDHC_Type *base, usdhc_command_t *command, bool pollingCmdDone); + +/*! + * @brief Handle card detect interrupt. + * + * @param base USDHC peripheral base address. + * @param handle USDHC handle. + * @param interruptFlags Card detect related interrupt flags. + */ +static void USDHC_TransferHandleCardDetect(USDHC_Type *base, usdhc_handle_t *handle, uint32_t interruptFlags); + +/*! + * @brief Handle command interrupt. + * + * @param base USDHC peripheral base address. + * @param handle USDHC handle. + * @param interruptFlags Command related interrupt flags. + */ +static void USDHC_TransferHandleCommand(USDHC_Type *base, usdhc_handle_t *handle, uint32_t interruptFlags); + +/*! + * @brief Handle data interrupt. + * + * @param base USDHC peripheral base address. + * @param handle USDHC handle. + * @param interruptFlags Data related interrupt flags. + */ +static void USDHC_TransferHandleData(USDHC_Type *base, usdhc_handle_t *handle, uint32_t interruptFlags); + +/*! + * @brief Handle SDIO card interrupt signal. + * + * @param base USDHC peripheral base address. + * @param handle USDHC handle. + */ +static void USDHC_TransferHandleSdioInterrupt(USDHC_Type *base, usdhc_handle_t *handle); + +/*! + * @brief Handle SDIO block gap event. + * + * @param base USDHC peripheral base address. + * @param handle USDHC handle. + */ +static void USDHC_TransferHandleBlockGap(USDHC_Type *base, usdhc_handle_t *handle); + +#if defined(FSL_FEATURE_USDHC_HAS_SDR50_MODE) && (FSL_FEATURE_USDHC_HAS_SDR50_MODE) +/*! + * @brief Handle retuning + * + * @param base USDHC peripheral base address. + * @param handle USDHC handle. + * @param interrupt flags + */ +static void USDHC_TransferHandleReTuning(USDHC_Type *base, usdhc_handle_t *handle, uint32_t interruptFlags); +#endif +/******************************************************************************* + * Variables + ******************************************************************************/ +/*! @brief USDHC base pointer array */ +static USDHC_Type *const s_usdhcBase[] = USDHC_BASE_PTRS; + +/*! @brief USDHC internal handle pointer array */ +static usdhc_handle_t *s_usdhcHandle[ARRAY_SIZE(s_usdhcBase)] = {0}; + +/*! @brief USDHC IRQ name array */ +static const IRQn_Type s_usdhcIRQ[] = USDHC_IRQS; + +#if !(defined(FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL) && FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL) +/*! @brief USDHC clock array name */ +static const clock_ip_name_t s_usdhcClock[] = USDHC_CLOCKS; +#endif /* FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL */ + +#if (defined(FSL_FEATURE_USDHC_HAS_RESET) && FSL_FEATURE_USDHC_HAS_RESET) +/*! @brief Pointers to USDHC resets for each instance. */ +static const reset_ip_name_t s_usdhcResets[] = USDHC_RSTS; +#endif + +/* USDHC ISR for transactional APIs. */ +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) +static usdhc_isr_t s_usdhcIsr = (usdhc_isr_t)DefaultISR; +#else +static usdhc_isr_t s_usdhcIsr; +#endif +/*! @brief Dummy data buffer for mmc boot mode */ +AT_NONCACHEABLE_SECTION_ALIGN(static uint32_t s_usdhcBootDummy, USDHC_ADMA2_ADDRESS_ALIGN); + +/******************************************************************************* + * Code + ******************************************************************************/ +static uint32_t USDHC_GetInstance(USDHC_Type *base) +{ + uint8_t instance = 0; + + while ((instance < ARRAY_SIZE(s_usdhcBase)) && (s_usdhcBase[instance] != base)) + { + instance++; + } + + assert(instance < ARRAY_SIZE(s_usdhcBase)); + + return instance; +} + +static status_t USDHC_SetTransferConfig(USDHC_Type *base, uint32_t transferFlags, size_t blockSize, uint32_t blockCount) +{ + uint32_t mixCtrl = base->MIX_CTRL; + + if (((uint32_t)kUSDHC_CommandOnly & transferFlags) != 0U) + { + /* clear data flags */ + mixCtrl &= ~(USDHC_MIX_CTRL_MSBSEL_MASK | USDHC_MIX_CTRL_BCEN_MASK | USDHC_MIX_CTRL_DTDSEL_MASK | + USDHC_MIX_CTRL_AC12EN_MASK | USDHC_MIX_CTRL_AC23EN_MASK); + + if (IS_USDHC_FLAG_SET(base->PRES_STATE, kUSDHC_CommandInhibitFlag)) + { + return kStatus_USDHC_BusyTransferring; + } + } + else + { + /* if transfer boot continous, only need set the CREQ bit, leave others as it is */ + if ((transferFlags & (uint32_t)kUSDHC_BootDataContinuous) != 0U) + { + /* clear stop at block gap request */ + base->PROT_CTRL &= ~USDHC_PROT_CTRL_SABGREQ_MASK; + /* continous transfer data */ + base->PROT_CTRL |= USDHC_PROT_CTRL_CREQ_MASK; + return kStatus_Success; + } + + /* check data inhibit flag */ + if (IS_USDHC_FLAG_SET(base->PRES_STATE, kUSDHC_DataInhibitFlag)) + { + return kStatus_USDHC_BusyTransferring; + } + /* check transfer block count */ + if ((blockCount > USDHC_MAX_BLOCK_COUNT)) + { + return kStatus_InvalidArgument; + } + + /* config mix parameter */ + mixCtrl &= ~(USDHC_MIX_CTRL_MSBSEL_MASK | USDHC_MIX_CTRL_BCEN_MASK | USDHC_MIX_CTRL_DTDSEL_MASK | + USDHC_MIX_CTRL_AC12EN_MASK); + + if ((transferFlags & (uint32_t)kUSDHC_CommandAndRxData) != 0U) + { + mixCtrl |= USDHC_MIX_CTRL_DTDSEL_MASK; + } + + if (blockCount > 1U) + { + mixCtrl |= USDHC_MIX_CTRL_MSBSEL_MASK | USDHC_MIX_CTRL_BCEN_MASK; + /* auto command 12 */ + if ((transferFlags & (uint32_t)kUSDHC_DataWithAutoCmd12) != 0U) + { + mixCtrl |= USDHC_MIX_CTRL_AC12EN_MASK; + } + } + + /* auto command 23, auto send set block count cmd before multiple read/write */ + if ((transferFlags & (uint32_t)kUSDHC_DataWithAutoCmd23) != 0U) + { + mixCtrl |= USDHC_MIX_CTRL_AC23EN_MASK; + base->VEND_SPEC2 |= USDHC_VEND_SPEC2_ACMD23_ARGU2_EN_MASK; + /* config the block count to DS_ADDR */ + base->DS_ADDR = blockCount; + } + else + { + mixCtrl &= ~USDHC_MIX_CTRL_AC23EN_MASK; + base->VEND_SPEC2 &= ~USDHC_VEND_SPEC2_ACMD23_ARGU2_EN_MASK; + } + + /* if transfer boot data, leave the block count to USDHC_SetMmcBootConfig function */ + if ((transferFlags & (uint32_t)kUSDHC_BootData) == 0U) + { + /* config data block size/block count */ + base->BLK_ATT = ((base->BLK_ATT & ~(USDHC_BLK_ATT_BLKSIZE_MASK | USDHC_BLK_ATT_BLKCNT_MASK)) | + (USDHC_BLK_ATT_BLKSIZE(blockSize) | USDHC_BLK_ATT_BLKCNT(blockCount))); + } + else + { + mixCtrl |= USDHC_MIX_CTRL_MSBSEL_MASK | USDHC_MIX_CTRL_BCEN_MASK; + base->PROT_CTRL |= USDHC_PROT_CTRL_RD_DONE_NO_8CLK_MASK; + } + } + /* config the mix parameter */ + base->MIX_CTRL = mixCtrl; + + return kStatus_Success; +} + +void USDHC_SetDataConfig(USDHC_Type *base, + usdhc_transfer_direction_t dataDirection, + uint32_t blockCount, + uint32_t blockSize) +{ + assert(blockCount <= USDHC_MAX_BLOCK_COUNT); + + uint32_t mixCtrl = base->MIX_CTRL; + + /* block attribute configuration */ + base->BLK_ATT = ((base->BLK_ATT & ~(USDHC_BLK_ATT_BLKSIZE_MASK | USDHC_BLK_ATT_BLKCNT_MASK)) | + (USDHC_BLK_ATT_BLKSIZE(blockSize) | USDHC_BLK_ATT_BLKCNT(blockCount))); + + /* config mix parameter */ + mixCtrl &= ~(USDHC_MIX_CTRL_MSBSEL_MASK | USDHC_MIX_CTRL_BCEN_MASK | USDHC_MIX_CTRL_DTDSEL_MASK); + + mixCtrl |= USDHC_MIX_CTRL_DTDSEL(dataDirection) | (blockCount > 1U ? USDHC_MIX_CTRL_MSBSEL_MASK : 0U); + + base->MIX_CTRL = mixCtrl; +} + +static status_t USDHC_ReceiveCommandResponse(USDHC_Type *base, usdhc_command_t *command) +{ + assert(command != NULL); + + uint32_t response0 = base->CMD_RSP0; + uint32_t response1 = base->CMD_RSP1; + uint32_t response2 = base->CMD_RSP2; + + if (command->responseType != kCARD_ResponseTypeNone) + { + command->response[0U] = response0; + if (command->responseType == kCARD_ResponseTypeR2) + { + /* R3-R2-R1-R0(lowest 8 bit is invalid bit) has the same format as R2 format in SD specification document + after removed internal CRC7 and end bit. */ + command->response[0U] <<= 8U; + command->response[1U] = (response1 << 8U) | ((response0 & 0xFF000000U) >> 24U); + command->response[2U] = (response2 << 8U) | ((response1 & 0xFF000000U) >> 24U); + command->response[3U] = (base->CMD_RSP3 << 8U) | ((response2 & 0xFF000000U) >> 24U); + } + } + + /* check response error flag */ + if ((command->responseErrorFlags != 0U) && + ((command->responseType == kCARD_ResponseTypeR1) || (command->responseType == kCARD_ResponseTypeR1b) || + (command->responseType == kCARD_ResponseTypeR6) || (command->responseType == kCARD_ResponseTypeR5))) + { + if (((command->responseErrorFlags) & (command->response[0U])) != 0U) + { + return kStatus_USDHC_SendCommandFailed; + } + } + + return kStatus_Success; +} + +static uint32_t USDHC_ReadDataPort(USDHC_Type *base, usdhc_data_t *data, uint32_t transferredWords) +{ + uint32_t i; + uint32_t totalWords; + uint32_t wordsCanBeRead; /* The words can be read at this time. */ + uint32_t readWatermark = ((base->WTMK_LVL & USDHC_WTMK_LVL_RD_WML_MASK) >> USDHC_WTMK_LVL_RD_WML_SHIFT); + + /* If DMA is enable, do not need to polling data port */ + if ((base->MIX_CTRL & USDHC_MIX_CTRL_DMAEN_MASK) == 0U) + { + /* + * Add non aligned access support ,user need make sure your buffer size is big + * enough to hold the data,in other words,user need make sure the buffer size + * is 4 byte aligned + */ + if (data->blockSize % sizeof(uint32_t) != 0U) + { + data->blockSize += + sizeof(uint32_t) - (data->blockSize % sizeof(uint32_t)); /* make the block size as word-aligned */ + } + + totalWords = ((data->blockCount * data->blockSize) / sizeof(uint32_t)); + + /* If watermark level is equal or bigger than totalWords, transfers totalWords data. */ + if (readWatermark >= totalWords) + { + wordsCanBeRead = totalWords; + } + /* If watermark level is less than totalWords and left words to be sent is equal or bigger than readWatermark, + transfers watermark level words. */ + else if ((readWatermark < totalWords) && ((totalWords - transferredWords) >= readWatermark)) + { + wordsCanBeRead = readWatermark; + } + /* If watermark level is less than totalWords and left words to be sent is less than readWatermark, transfers + left + words. */ + else + { + wordsCanBeRead = (totalWords - transferredWords); + } + + i = 0U; + while (i < wordsCanBeRead) + { + data->rxData[transferredWords++] = USDHC_ReadData(base); + i++; + } + } + + return transferredWords; +} + +static status_t USDHC_ReadByDataPortBlocking(USDHC_Type *base, usdhc_data_t *data) +{ + uint32_t totalWords; + uint32_t transferredWords = 0U, interruptStatus = 0U; + status_t error = kStatus_Success; + + /* + * Add non aligned access support ,user need make sure your buffer size is big + * enough to hold the data,in other words,user need make sure the buffer size + * is 4 byte aligned + */ + if (data->blockSize % sizeof(uint32_t) != 0U) + { + data->blockSize += + sizeof(uint32_t) - (data->blockSize % sizeof(uint32_t)); /* make the block size as word-aligned */ + } + + totalWords = ((data->blockCount * data->blockSize) / sizeof(uint32_t)); + + while ((error == kStatus_Success) && (transferredWords < totalWords)) + { + while ( + !(IS_USDHC_FLAG_SET(interruptStatus, ((uint32_t)kUSDHC_BufferReadReadyFlag | + (uint32_t)kUSDHC_DataErrorFlag | (uint32_t)kUSDHC_TuningErrorFlag)))) + { + interruptStatus = USDHC_GetInterruptStatusFlags(base); + } + + /* during std tuning process, software do not need to read data, but wait BRR is enough */ + if ((data->dataType == (uint32_t)kUSDHC_TransferDataTuning) && + (IS_USDHC_FLAG_SET(interruptStatus, kUSDHC_BufferReadReadyFlag))) + { + USDHC_ClearInterruptStatusFlags(base, kUSDHC_BufferReadReadyFlag); + + return kStatus_Success; + } +#if defined(FSL_FEATURE_USDHC_HAS_SDR50_MODE) && (FSL_FEATURE_USDHC_HAS_SDR50_MODE) + else if (IS_USDHC_FLAG_SET(interruptStatus, kUSDHC_TuningErrorFlag)) + { + USDHC_ClearInterruptStatusFlags(base, kUSDHC_TuningErrorFlag); + /* if tuning error occur ,return directly */ + error = kStatus_USDHC_TuningError; + } +#endif + else if (IS_USDHC_FLAG_SET(interruptStatus, kUSDHC_DataErrorFlag)) + { + if (!(data->enableIgnoreError)) + { + error = kStatus_Fail; + } + /* clear data error flag */ + USDHC_ClearInterruptStatusFlags(base, kUSDHC_DataErrorFlag); + } + else + { + /* Intentional empty */ + } + + if (error == kStatus_Success) + { + transferredWords = USDHC_ReadDataPort(base, data, transferredWords); + /* clear buffer read ready */ + USDHC_ClearInterruptStatusFlags(base, kUSDHC_BufferReadReadyFlag); + interruptStatus = 0U; + } + } + + /* Clear data complete flag after the last read operation. */ + USDHC_ClearInterruptStatusFlags(base, kUSDHC_DataCompleteFlag); + + return error; +} + +static uint32_t USDHC_WriteDataPort(USDHC_Type *base, usdhc_data_t *data, uint32_t transferredWords) +{ + uint32_t i; + uint32_t totalWords; + uint32_t wordsCanBeWrote; /* Words can be wrote at this time. */ + uint32_t writeWatermark = ((base->WTMK_LVL & USDHC_WTMK_LVL_WR_WML_MASK) >> USDHC_WTMK_LVL_WR_WML_SHIFT); + + /* If DMA is enable, do not need to polling data port */ + if ((base->MIX_CTRL & USDHC_MIX_CTRL_DMAEN_MASK) == 0U) + { + /* + * Add non aligned access support ,user need make sure your buffer size is big + * enough to hold the data,in other words,user need make sure the buffer size + * is 4 byte aligned + */ + if (data->blockSize % sizeof(uint32_t) != 0U) + { + data->blockSize += + sizeof(uint32_t) - (data->blockSize % sizeof(uint32_t)); /* make the block size as word-aligned */ + } + + totalWords = ((data->blockCount * data->blockSize) / sizeof(uint32_t)); + + /* If watermark level is equal or bigger than totalWords, transfers totalWords data.*/ + if (writeWatermark >= totalWords) + { + wordsCanBeWrote = totalWords; + } + /* If watermark level is less than totalWords and left words to be sent is equal or bigger than watermark, + transfers watermark level words. */ + else if ((writeWatermark < totalWords) && ((totalWords - transferredWords) >= writeWatermark)) + { + wordsCanBeWrote = writeWatermark; + } + /* If watermark level is less than totalWords and left words to be sent is less than watermark, transfers left + words. */ + else + { + wordsCanBeWrote = (totalWords - transferredWords); + } + + i = 0U; + while (i < wordsCanBeWrote) + { + USDHC_WriteData(base, data->txData[transferredWords++]); + i++; + } + } + + return transferredWords; +} + +static status_t USDHC_WriteByDataPortBlocking(USDHC_Type *base, usdhc_data_t *data) +{ + uint32_t totalWords; + + uint32_t transferredWords = 0U, interruptStatus = 0U; + status_t error = kStatus_Success; + + /* + * Add non aligned access support ,user need make sure your buffer size is big + * enough to hold the data,in other words,user need make sure the buffer size + * is 4 byte aligned + */ + if (data->blockSize % sizeof(uint32_t) != 0U) + { + data->blockSize += + sizeof(uint32_t) - (data->blockSize % sizeof(uint32_t)); /* make the block size as word-aligned */ + } + + totalWords = (data->blockCount * data->blockSize) / sizeof(uint32_t); + + while ((error == kStatus_Success) && (transferredWords < totalWords)) + { + while (!(IS_USDHC_FLAG_SET(interruptStatus, (uint32_t)kUSDHC_BufferWriteReadyFlag | + (uint32_t)kUSDHC_DataErrorFlag | + (uint32_t)kUSDHC_TuningErrorFlag))) + { + interruptStatus = USDHC_GetInterruptStatusFlags(base); + } +#if defined(FSL_FEATURE_USDHC_HAS_SDR50_MODE) && (FSL_FEATURE_USDHC_HAS_SDR50_MODE) + if (IS_USDHC_FLAG_SET(interruptStatus, kUSDHC_TuningErrorFlag)) + { + USDHC_ClearInterruptStatusFlags(base, kUSDHC_TuningErrorFlag); + /* if tuning error occur ,return directly */ + return kStatus_USDHC_TuningError; + } + else +#endif + if (IS_USDHC_FLAG_SET(interruptStatus, kUSDHC_DataErrorFlag)) + { + if (!(data->enableIgnoreError)) + { + error = kStatus_Fail; + } + /* clear data error flag */ + USDHC_ClearInterruptStatusFlags(base, kUSDHC_DataErrorFlag); + } + else + { + /* Intentional empty */ + } + + if (error == kStatus_Success) + { + transferredWords = USDHC_WriteDataPort(base, data, transferredWords); + /* clear buffer write ready */ + USDHC_ClearInterruptStatusFlags(base, kUSDHC_BufferWriteReadyFlag); + interruptStatus = 0U; + } + } + + /* Wait write data complete or data transfer error after the last writing operation. */ + while (!(IS_USDHC_FLAG_SET(interruptStatus, (uint32_t)kUSDHC_DataCompleteFlag | (uint32_t)kUSDHC_DataErrorFlag))) + { + interruptStatus = USDHC_GetInterruptStatusFlags(base); + } + + if ((interruptStatus & (uint32_t)kUSDHC_DataErrorFlag) != 0UL) + { + if (!(data->enableIgnoreError)) + { + error = kStatus_Fail; + } + } + USDHC_ClearInterruptStatusFlags(base, ((uint32_t)kUSDHC_DataCompleteFlag | (uint32_t)kUSDHC_DataErrorFlag)); + + return error; +} + +/*! + * brief send command function + * + * param base USDHC peripheral base address. + * param command configuration + */ +void USDHC_SendCommand(USDHC_Type *base, usdhc_command_t *command) +{ + assert(NULL != command); + + uint32_t xferType = base->CMD_XFR_TYP, flags = command->flags; + + if (((base->PRES_STATE & (uint32_t)kUSDHC_CommandInhibitFlag) == 0U) && (command->type != kCARD_CommandTypeEmpty)) + { + if ((command->responseType == kCARD_ResponseTypeR1) || (command->responseType == kCARD_ResponseTypeR5) || + (command->responseType == kCARD_ResponseTypeR6) || (command->responseType == kCARD_ResponseTypeR7)) + { + flags |= ((uint32_t)kUSDHC_ResponseLength48Flag | (uint32_t)kUSDHC_EnableCrcCheckFlag | + (uint32_t)kUSDHC_EnableIndexCheckFlag); + } + else if ((command->responseType == kCARD_ResponseTypeR1b) || (command->responseType == kCARD_ResponseTypeR5b)) + { + flags |= ((uint32_t)kUSDHC_ResponseLength48BusyFlag | (uint32_t)kUSDHC_EnableCrcCheckFlag | + (uint32_t)kUSDHC_EnableIndexCheckFlag); + } + else if (command->responseType == kCARD_ResponseTypeR2) + { + flags |= ((uint32_t)kUSDHC_ResponseLength136Flag | (uint32_t)kUSDHC_EnableCrcCheckFlag); + } + else if ((command->responseType == kCARD_ResponseTypeR3) || (command->responseType == kCARD_ResponseTypeR4)) + { + flags |= ((uint32_t)kUSDHC_ResponseLength48Flag); + } + else + { + /* Intentional empty */ + } + + if (command->type == kCARD_CommandTypeAbort) + { + flags |= (uint32_t)kUSDHC_CommandTypeAbortFlag; + } + + /* config cmd index */ + xferType &= ~(USDHC_CMD_XFR_TYP_CMDINX_MASK | USDHC_CMD_XFR_TYP_CMDTYP_MASK | USDHC_CMD_XFR_TYP_CICEN_MASK | + USDHC_CMD_XFR_TYP_CCCEN_MASK | USDHC_CMD_XFR_TYP_RSPTYP_MASK | USDHC_CMD_XFR_TYP_DPSEL_MASK); + + xferType |= + (((command->index << USDHC_CMD_XFR_TYP_CMDINX_SHIFT) & USDHC_CMD_XFR_TYP_CMDINX_MASK) | + ((flags) & (USDHC_CMD_XFR_TYP_CMDTYP_MASK | USDHC_CMD_XFR_TYP_CICEN_MASK | USDHC_CMD_XFR_TYP_CCCEN_MASK | + USDHC_CMD_XFR_TYP_RSPTYP_MASK | USDHC_CMD_XFR_TYP_DPSEL_MASK))); + + /* config the command xfertype and argument */ + base->CMD_ARG = command->argument; + base->CMD_XFR_TYP = xferType; + } + + if (command->type == kCARD_CommandTypeEmpty) + { + /* disable CMD done interrupt for empty command */ + base->INT_SIGNAL_EN &= ~USDHC_INT_SIGNAL_EN_CCIEN_MASK; + } +} + +static status_t USDHC_WaitCommandDone(USDHC_Type *base, usdhc_command_t *command, bool pollingCmdDone) +{ + assert(NULL != command); + + status_t error = kStatus_Success; + uint32_t interruptStatus = 0U; + /* check if need polling command done or not */ + if (pollingCmdDone) + { + /* Wait command complete or USDHC encounters error. */ + while (!(IS_USDHC_FLAG_SET(interruptStatus, kUSDHC_CommandFlag))) + { + interruptStatus = USDHC_GetInterruptStatusFlags(base); + } + + if ((interruptStatus & (uint32_t)kUSDHC_CommandErrorFlag) != 0UL) + { + error = kStatus_Fail; + } + + /* Receive response when command completes successfully. */ + if (error == kStatus_Success) + { + error = USDHC_ReceiveCommandResponse(base, command); + } + + USDHC_ClearInterruptStatusFlags(base, kUSDHC_CommandFlag); + } + + return error; +} + +static status_t USDHC_TransferDataBlocking(USDHC_Type *base, usdhc_data_t *data, bool enDMA) +{ + status_t error = kStatus_Success; + uint32_t interruptStatus = 0U; + + if (enDMA) + { + /* Wait data complete or USDHC encounters error. */ + while (!(IS_USDHC_FLAG_SET(interruptStatus, ((uint32_t)kUSDHC_DataDMAFlag | (uint32_t)kUSDHC_TuningErrorFlag)))) + { + interruptStatus = USDHC_GetInterruptStatusFlags(base); + } + +#if defined(FSL_FEATURE_USDHC_HAS_SDR50_MODE) && (FSL_FEATURE_USDHC_HAS_SDR50_MODE) + if (IS_USDHC_FLAG_SET(interruptStatus, kUSDHC_TuningErrorFlag)) + { + error = kStatus_USDHC_TuningError; + } + else +#endif + if (IS_USDHC_FLAG_SET(interruptStatus, ((uint32_t)kUSDHC_DataErrorFlag | (uint32_t)kUSDHC_DmaErrorFlag))) + { + if ((!(data->enableIgnoreError)) || (IS_USDHC_FLAG_SET(interruptStatus, kUSDHC_DataTimeoutFlag))) + { + error = kStatus_USDHC_TransferDataFailed; + } + } + else + { + /* Intentional empty */ + } + /* load dummy data */ + if ((data->dataType == (uint32_t)kUSDHC_TransferDataBootcontinous) && (error == kStatus_Success)) + { + *(data->rxData) = s_usdhcBootDummy; + } + + USDHC_ClearInterruptStatusFlags(base, ((uint32_t)kUSDHC_DataDMAFlag | (uint32_t)kUSDHC_TuningErrorFlag)); + } + else + { + if (data->rxData != NULL) + { + error = USDHC_ReadByDataPortBlocking(base, data); + if (error != kStatus_Success) + { + return error; + } + } + else + { + error = USDHC_WriteByDataPortBlocking(base, data); + if (error != kStatus_Success) + { + return error; + } + } + } + + return error; +} + +/*! + * brief USDHC module initialization function. + * + * Configures the USDHC according to the user configuration. + * + * Example: + code + usdhc_config_t config; + config.cardDetectDat3 = false; + config.endianMode = kUSDHC_EndianModeLittle; + config.dmaMode = kUSDHC_DmaModeAdma2; + config.readWatermarkLevel = 128U; + config.writeWatermarkLevel = 128U; + USDHC_Init(USDHC, &config); + endcode + * + * param base USDHC peripheral base address. + * param config USDHC configuration information. + * retval kStatus_Success Operate successfully. + */ +void USDHC_Init(USDHC_Type *base, const usdhc_config_t *config) +{ + assert(config != NULL); + assert((config->writeWatermarkLevel >= 1U) && (config->writeWatermarkLevel <= 128U)); + assert((config->readWatermarkLevel >= 1U) && (config->readWatermarkLevel <= 128U)); +#if !(defined(FSL_FEATURE_USDHC_HAS_NO_RW_BURST_LEN) && FSL_FEATURE_USDHC_HAS_NO_RW_BURST_LEN) + assert(config->writeBurstLen <= 16U); +#endif + uint32_t proctl, sysctl, wml; + +#if !(defined(FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL) && FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL) + /* Enable USDHC clock. */ + CLOCK_EnableClock(s_usdhcClock[USDHC_GetInstance(base)]); +#endif + +#if (defined(FSL_FEATURE_USDHC_HAS_RESET) && FSL_FEATURE_USDHC_HAS_RESET) + /* Reset the USDHC module */ + RESET_PeripheralReset(s_usdhcResets[USDHC_GetInstance(base)]); +#endif + + /* Reset ALL USDHC. */ + base->SYS_CTRL |= USDHC_SYS_CTRL_RSTA_MASK | USDHC_SYS_CTRL_RSTC_MASK | USDHC_SYS_CTRL_RSTD_MASK; + + proctl = base->PROT_CTRL; + wml = base->WTMK_LVL; + sysctl = base->SYS_CTRL; + + proctl &= ~(USDHC_PROT_CTRL_EMODE_MASK | USDHC_PROT_CTRL_DMASEL_MASK); + /* Endian mode*/ + proctl |= USDHC_PROT_CTRL_EMODE(config->endianMode); + +#if (defined(FSL_FEATURE_USDHC_HAS_NO_RW_BURST_LEN) && FSL_FEATURE_USDHC_HAS_NO_RW_BURST_LEN) + /* Watermark level */ + wml &= ~(USDHC_WTMK_LVL_RD_WML_MASK | USDHC_WTMK_LVL_WR_WML_MASK); + wml |= (USDHC_WTMK_LVL_RD_WML(config->readWatermarkLevel) | USDHC_WTMK_LVL_WR_WML(config->writeWatermarkLevel)); +#else + /* Watermark level */ + wml &= ~(USDHC_WTMK_LVL_RD_WML_MASK | USDHC_WTMK_LVL_WR_WML_MASK | USDHC_WTMK_LVL_RD_BRST_LEN_MASK | + USDHC_WTMK_LVL_WR_BRST_LEN_MASK); + wml |= (USDHC_WTMK_LVL_RD_WML(config->readWatermarkLevel) | USDHC_WTMK_LVL_WR_WML(config->writeWatermarkLevel) | + USDHC_WTMK_LVL_RD_BRST_LEN(config->readBurstLen) | USDHC_WTMK_LVL_WR_BRST_LEN(config->writeBurstLen)); +#endif + + /* config the data timeout value */ + sysctl &= ~USDHC_SYS_CTRL_DTOCV_MASK; + sysctl |= USDHC_SYS_CTRL_DTOCV(config->dataTimeout); + + base->SYS_CTRL = sysctl; + base->WTMK_LVL = wml; + base->PROT_CTRL = proctl; + +#if FSL_FEATURE_USDHC_HAS_EXT_DMA + /* disable external DMA */ + base->VEND_SPEC &= ~USDHC_VEND_SPEC_EXT_DMA_EN_MASK; +#endif + /* disable internal DMA and DDR mode */ + base->MIX_CTRL &= ~(USDHC_MIX_CTRL_DMAEN_MASK | USDHC_MIX_CTRL_DDR_EN_MASK); + /* disable interrupt, enable all the interrupt status, clear status. */ + base->INT_STATUS_EN = kUSDHC_AllInterruptFlags; + base->INT_SIGNAL_EN = 0UL; + base->INT_STATUS = kUSDHC_AllInterruptFlags; +} + +/*! + * brief Deinitializes the USDHC. + * + * param base USDHC peripheral base address. + */ +void USDHC_Deinit(USDHC_Type *base) +{ +#if !(defined(FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL) && FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL) + /* Disable clock. */ + CLOCK_DisableClock(s_usdhcClock[USDHC_GetInstance(base)]); +#endif +} + +/*! + * brief Resets the USDHC. + * + * param base USDHC peripheral base address. + * param mask The reset type mask(_usdhc_reset). + * param timeout Timeout for reset. + * retval true Reset successfully. + * retval false Reset failed. + */ +bool USDHC_Reset(USDHC_Type *base, uint32_t mask, uint32_t timeout) +{ + base->SYS_CTRL |= (mask & (USDHC_SYS_CTRL_RSTA_MASK | USDHC_SYS_CTRL_RSTC_MASK | USDHC_SYS_CTRL_RSTD_MASK +#if defined(FSL_FEATURE_USDHC_HAS_SDR50_MODE) && (FSL_FEATURE_USDHC_HAS_SDR50_MODE) + | USDHC_SYS_CTRL_RSTT_MASK +#endif + )); + /* Delay some time to wait reset success. */ + while (IS_USDHC_FLAG_SET(base->SYS_CTRL, mask)) + { + if (timeout == 0UL) + { + break; + } + timeout--; + } + + return ((0UL == timeout) ? false : true); +} + +/*! + * brief Gets the capability information. + * + * param base USDHC peripheral base address. + * param capability Structure to save capability information. + */ +void USDHC_GetCapability(USDHC_Type *base, usdhc_capability_t *capability) +{ + assert(capability != NULL); + + uint32_t htCapability; + uint32_t maxBlockLength; + + htCapability = base->HOST_CTRL_CAP; + + /* Get the capability of USDHC. */ + maxBlockLength = ((htCapability & USDHC_HOST_CTRL_CAP_MBL_MASK) >> USDHC_HOST_CTRL_CAP_MBL_SHIFT); + capability->maxBlockLength = (512UL << maxBlockLength); + /* Other attributes not in HTCAPBLT register. */ + capability->maxBlockCount = USDHC_MAX_BLOCK_COUNT; + capability->flags = + (htCapability & (USDHC_HOST_CTRL_CAP_ADMAS_MASK | USDHC_HOST_CTRL_CAP_HSS_MASK | USDHC_HOST_CTRL_CAP_DMAS_MASK | + USDHC_HOST_CTRL_CAP_SRS_MASK | USDHC_HOST_CTRL_CAP_VS33_MASK)); + capability->flags |= htCapability & USDHC_HOST_CTRL_CAP_VS30_MASK; + capability->flags |= htCapability & USDHC_HOST_CTRL_CAP_VS18_MASK; + capability->flags |= htCapability & USDHC_HOST_CTRL_CAP_DDR50_SUPPORT_MASK; +#if defined(FSL_FEATURE_USDHC_HAS_SDR104_MODE) && FSL_FEATURE_USDHC_HAS_SDR104_MODE + capability->flags |= USDHC_HOST_CTRL_CAP_SDR104_SUPPORT_MASK; +#endif + +#if defined(FSL_FEATURE_USDHC_HAS_SDR104_MODE) && FSL_FEATURE_USDHC_HAS_SDR50_MODE + capability->flags |= USDHC_HOST_CTRL_CAP_SDR50_SUPPORT_MASK; +#endif + /* USDHC support 4/8 bit data bus width. */ + capability->flags |= (USDHC_HOST_CTRL_CAP_MBL_SHIFT << 0UL) | (USDHC_HOST_CTRL_CAP_MBL_SHIFT << 1UL); +} + +/*! + * brief Sets the SD bus clock frequency. + * + * param base USDHC peripheral base address. + * param srcClock_Hz USDHC source clock frequency united in Hz. + * param busClock_Hz SD bus clock frequency united in Hz. + * + * return The nearest frequency of busClock_Hz configured to SD bus. + */ +uint32_t USDHC_SetSdClock(USDHC_Type *base, uint32_t srcClock_Hz, uint32_t busClock_Hz) +{ + assert(srcClock_Hz != 0U); + assert(busClock_Hz != 0U); + + uint32_t totalDiv = 0UL; + uint32_t divisor = 0UL; + uint32_t prescaler = 0UL; + uint32_t sysctl = 0UL; + uint32_t nearestFrequency = 0UL; + + if (busClock_Hz > srcClock_Hz) + { + busClock_Hz = srcClock_Hz; + } + + totalDiv = srcClock_Hz / busClock_Hz; + + /* calucate total divisor first */ + if (totalDiv > (USDHC_MAX_CLKFS * USDHC_MAX_DVS)) + { + return 0UL; + } + + if (totalDiv != 0UL) + { + /* calucate the divisor (srcClock_Hz / divisor) <= busClock_Hz */ + if ((srcClock_Hz / totalDiv) > busClock_Hz) + { + totalDiv++; + } + + /* divide the total divisor to div and prescaler */ + if (totalDiv > USDHC_MAX_DVS) + { + prescaler = totalDiv / USDHC_MAX_DVS; + /* prescaler must be a value which equal 2^n and smaller than SDHC_MAX_CLKFS */ + while (((USDHC_MAX_CLKFS % prescaler) != 0UL) || (prescaler == 1UL)) + { + prescaler++; + } + /* calucate the divisor */ + divisor = totalDiv / prescaler; + /* fine tuning the divisor until divisor * prescaler >= totalDiv */ + while ((divisor * prescaler) < totalDiv) + { + divisor++; + if (divisor > USDHC_MAX_DVS) + { + prescaler <<= 1UL; + if (prescaler > USDHC_MAX_CLKFS) + { + return 0UL; + } + divisor = totalDiv / prescaler; + } + } + } + else + { + /* in this situation , divsior and SDCLKFS can generate same clock + use SDCLKFS*/ + if (((totalDiv % 2UL) != 0UL) && (totalDiv != 1UL)) + { + divisor = totalDiv; + prescaler = 1UL; + } + else + { + divisor = 1UL; + prescaler = totalDiv; + } + } + nearestFrequency = srcClock_Hz / (divisor == 0UL ? 1UL : divisor) / prescaler; + } + /* in this condition , srcClock_Hz = busClock_Hz, */ + else + { + /* in DDR mode , set SDCLKFS to 0, divisor = 0, actually the + totoal divider = 2U */ + divisor = 0UL; + prescaler = 0UL; + nearestFrequency = srcClock_Hz; + } + + /* calucate the value write to register */ + if (divisor != 0UL) + { + USDHC_PREV_DVS(divisor); + } + /* calucate the value write to register */ + if (prescaler != 0UL) + { + USDHC_PREV_CLKFS(prescaler, 1UL); + } + + /* Set the SD clock frequency divisor, SD clock frequency select, data timeout counter value. */ + sysctl = base->SYS_CTRL; + sysctl &= ~(USDHC_SYS_CTRL_DVS_MASK | USDHC_SYS_CTRL_SDCLKFS_MASK); + sysctl |= (USDHC_SYS_CTRL_DVS(divisor) | USDHC_SYS_CTRL_SDCLKFS(prescaler)); + base->SYS_CTRL = sysctl; + + /* Wait until the SD clock is stable. */ + while (!IS_USDHC_FLAG_SET(base->PRES_STATE, USDHC_PRES_STATE_SDSTB_MASK)) + { + } + + return nearestFrequency; +} + +/*! + * brief Sends 80 clocks to the card to set it to the active state. + * + * This function must be called each time the card is inserted to ensure that the card can receive the command + * correctly. + * + * param base USDHC peripheral base address. + * param timeout Timeout to initialize card. + * retval true Set card active successfully. + * retval false Set card active failed. + */ +bool USDHC_SetCardActive(USDHC_Type *base, uint32_t timeout) +{ + base->SYS_CTRL |= USDHC_SYS_CTRL_INITA_MASK; + /* Delay some time to wait card become active state. */ + while (IS_USDHC_FLAG_SET(base->SYS_CTRL, USDHC_SYS_CTRL_INITA_MASK)) + { + if (0UL == timeout) + { + break; + } + timeout--; + } + + return ((0UL == timeout) ? false : true); +} + +/*! + * brief the enable/disable DDR mode + * + * param base USDHC peripheral base address. + * param enable/disable flag + * param nibble position + */ +void USDHC_EnableDDRMode(USDHC_Type *base, bool enable, uint32_t nibblePos) +{ + uint32_t prescaler = (base->SYS_CTRL & USDHC_SYS_CTRL_SDCLKFS_MASK) >> USDHC_SYS_CTRL_SDCLKFS_SHIFT; + + if (enable) + { + base->MIX_CTRL &= ~USDHC_MIX_CTRL_NIBBLE_POS_MASK; + base->MIX_CTRL |= (USDHC_MIX_CTRL_DDR_EN_MASK | USDHC_MIX_CTRL_NIBBLE_POS(nibblePos)); + prescaler >>= 1UL; + } + else + { + base->MIX_CTRL &= ~USDHC_MIX_CTRL_DDR_EN_MASK; + + if (prescaler == 0UL) + { + prescaler += 1UL; + } + else + { + prescaler <<= 1UL; + } + } + + base->SYS_CTRL = (base->SYS_CTRL & (~USDHC_SYS_CTRL_SDCLKFS_MASK)) | USDHC_SYS_CTRL_SDCLKFS(prescaler); +} + +/*! + * brief Configures the MMC boot feature. + * + * Example: + code + usdhc_boot_config_t config; + config.ackTimeoutCount = 4; + config.bootMode = kUSDHC_BootModeNormal; + config.blockCount = 5; + config.enableBootAck = true; + config.enableBoot = true; + config.enableAutoStopAtBlockGap = true; + USDHC_SetMmcBootConfig(USDHC, &config); + endcode + * + * param base USDHC peripheral base address. + * param config The MMC boot configuration information. + */ +void USDHC_SetMmcBootConfig(USDHC_Type *base, const usdhc_boot_config_t *config) +{ + assert(config != NULL); + assert(config->ackTimeoutCount <= (USDHC_MMC_BOOT_DTOCV_ACK_MASK >> USDHC_MMC_BOOT_DTOCV_ACK_SHIFT)); + assert(config->blockCount <= (USDHC_MMC_BOOT_BOOT_BLK_CNT_MASK >> USDHC_MMC_BOOT_BOOT_BLK_CNT_SHIFT)); + + uint32_t mmcboot = base->MMC_BOOT; + + mmcboot &= ~(USDHC_MMC_BOOT_DTOCV_ACK_MASK | USDHC_MMC_BOOT_BOOT_MODE_MASK | USDHC_MMC_BOOT_BOOT_BLK_CNT_MASK); + mmcboot |= USDHC_MMC_BOOT_DTOCV_ACK(config->ackTimeoutCount) | USDHC_MMC_BOOT_BOOT_MODE(config->bootMode); + + if (config->enableBootAck) + { + mmcboot |= USDHC_MMC_BOOT_BOOT_ACK_MASK; + } + if (config->enableAutoStopAtBlockGap) + { + mmcboot |= + USDHC_MMC_BOOT_AUTO_SABG_EN_MASK | USDHC_MMC_BOOT_BOOT_BLK_CNT(USDHC_MAX_BLOCK_COUNT - config->blockCount); + /* always set the block count to USDHC_MAX_BLOCK_COUNT to use auto stop at block gap feature */ + base->BLK_ATT = ((base->BLK_ATT & ~(USDHC_BLK_ATT_BLKSIZE_MASK | USDHC_BLK_ATT_BLKCNT_MASK)) | + (USDHC_BLK_ATT_BLKSIZE(config->blockSize) | USDHC_BLK_ATT_BLKCNT(USDHC_MAX_BLOCK_COUNT))); + } + else + { + base->BLK_ATT = ((base->BLK_ATT & ~(USDHC_BLK_ATT_BLKSIZE_MASK | USDHC_BLK_ATT_BLKCNT_MASK)) | + (USDHC_BLK_ATT_BLKSIZE(config->blockSize) | USDHC_BLK_ATT_BLKCNT(config->blockCount))); + } + + base->MMC_BOOT = mmcboot; +} + +/*! + * brief Sets the ADMA1 descriptor table configuration. + * + * param admaTable Adma table address. + * param admaTableWords Adma table length. + * param dataBufferAddr Data buffer address. + * param dataBytes Data length. + * param flags ADAM descriptor flag, used to indicate to create multiple or single descriptor, please + * reference _usdhc_adma_flag. + * retval kStatus_OutOfRange ADMA descriptor table length isn't enough to describe data. + * retval kStatus_Success Operate successfully. + */ +status_t USDHC_SetADMA1Descriptor( + uint32_t *admaTable, uint32_t admaTableWords, const uint32_t *dataBufferAddr, uint32_t dataBytes, uint32_t flags) +{ + assert(NULL != admaTable); + assert(NULL != dataBufferAddr); + + uint32_t miniEntries, startEntries = 0UL, + maxEntries = (admaTableWords * sizeof(uint32_t)) / sizeof(usdhc_adma1_descriptor_t); + usdhc_adma1_descriptor_t *adma1EntryAddress = (usdhc_adma1_descriptor_t *)(uint32_t)(admaTable); + uint32_t i, dmaBufferLen = 0UL; + const uint32_t *data = dataBufferAddr; + + if (((uint32_t)data % USDHC_ADMA1_ADDRESS_ALIGN) != 0UL) + { + return kStatus_USDHC_DMADataAddrNotAlign; + } + + if (flags == (uint32_t)kUSDHC_AdmaDescriptorMultipleFlag) + { + return kStatus_USDHC_NotSupport; + } + /* + * Add non aligned access support ,user need make sure your buffer size is big + * enough to hold the data,in other words,user need make sure the buffer size + * is 4 byte aligned + */ + if (dataBytes % sizeof(uint32_t) != 0UL) + { + /* make the data length as word-aligned */ + dataBytes += sizeof(uint32_t) - (dataBytes % sizeof(uint32_t)); + } + + /* Check if ADMA descriptor's number is enough. */ + if ((dataBytes % USDHC_ADMA1_DESCRIPTOR_MAX_LENGTH_PER_ENTRY) == 0UL) + { + miniEntries = dataBytes / USDHC_ADMA1_DESCRIPTOR_MAX_LENGTH_PER_ENTRY; + } + else + { + miniEntries = ((dataBytes / USDHC_ADMA1_DESCRIPTOR_MAX_LENGTH_PER_ENTRY) + 1UL); + } + + /* ADMA1 needs two descriptors to finish a transfer */ + miniEntries <<= 1UL; + + if (miniEntries + startEntries > maxEntries) + { + return kStatus_OutOfRange; + } + + for (i = startEntries; i < (miniEntries + startEntries); i += 2UL) + { + if (dataBytes > USDHC_ADMA1_DESCRIPTOR_MAX_LENGTH_PER_ENTRY) + { + dmaBufferLen = USDHC_ADMA1_DESCRIPTOR_MAX_LENGTH_PER_ENTRY; + } + else + { + dmaBufferLen = dataBytes; + } + + adma1EntryAddress[i] = (dmaBufferLen << USDHC_ADMA1_DESCRIPTOR_LENGTH_SHIFT); + adma1EntryAddress[i] |= (uint32_t)kUSDHC_Adma1DescriptorTypeSetLength; + adma1EntryAddress[i + 1UL] = (uint32_t)(data); + adma1EntryAddress[i + 1UL] |= + (uint32_t)kUSDHC_Adma1DescriptorTypeTransfer | (uint32_t)kUSDHC_Adma1DescriptorInterrupFlag; + data = (uint32_t *)((uint32_t)data + dmaBufferLen); + dataBytes -= dmaBufferLen; + } + /* the end of the descriptor */ + adma1EntryAddress[i - 1UL] |= (uint32_t)kUSDHC_Adma1DescriptorEndFlag; + + return kStatus_Success; +} + +/*! + * brief Sets the ADMA2 descriptor table configuration. + * + * param admaTable Adma table address. + * param admaTableWords Adma table length. + * param dataBufferAddr Data buffer address. + * param dataBytes Data Data length. + * param flags ADAM descriptor flag, used to indicate to create multiple or single descriptor, please + * reference _usdhc_adma_flag. + * retval kStatus_OutOfRange ADMA descriptor table length isn't enough to describe data. + * retval kStatus_Success Operate successfully. + */ +status_t USDHC_SetADMA2Descriptor( + uint32_t *admaTable, uint32_t admaTableWords, const uint32_t *dataBufferAddr, uint32_t dataBytes, uint32_t flags) +{ + assert(NULL != admaTable); + assert(NULL != dataBufferAddr); + + uint32_t miniEntries, startEntries = 0UL, + maxEntries = (admaTableWords * sizeof(uint32_t)) / sizeof(usdhc_adma2_descriptor_t); + usdhc_adma2_descriptor_t *adma2EntryAddress = (usdhc_adma2_descriptor_t *)(uint32_t)(admaTable); + uint32_t i, dmaBufferLen = 0UL; + const uint32_t *data = dataBufferAddr; + + if (((uint32_t)data % USDHC_ADMA2_ADDRESS_ALIGN) != 0UL) + { + return kStatus_USDHC_DMADataAddrNotAlign; + } + /* + * Add non aligned access support ,user need make sure your buffer size is big + * enough to hold the data,in other words,user need make sure the buffer size + * is 4 byte aligned + */ + if (dataBytes % sizeof(uint32_t) != 0UL) + { + /* make the data length as word-aligned */ + dataBytes += sizeof(uint32_t) - (dataBytes % sizeof(uint32_t)); + } + + /* Check if ADMA descriptor's number is enough. */ + if ((dataBytes % USDHC_ADMA2_DESCRIPTOR_MAX_LENGTH_PER_ENTRY) == 0UL) + { + miniEntries = dataBytes / USDHC_ADMA2_DESCRIPTOR_MAX_LENGTH_PER_ENTRY; + } + else + { + miniEntries = ((dataBytes / USDHC_ADMA2_DESCRIPTOR_MAX_LENGTH_PER_ENTRY) + 1UL); + } + /* calucate the start entry for multiple descriptor mode, ADMA engine is not stop, so update the descriptor + data adress and data size is enough */ + if (flags == (uint32_t)kUSDHC_AdmaDescriptorMultipleFlag) + { + for (i = 0UL; i < maxEntries; i++) + { + if ((adma2EntryAddress[i].attribute & (uint32_t)kUSDHC_Adma2DescriptorValidFlag) == 0UL) + { + break; + } + } + startEntries = i; + /* add one entry for dummy entry */ + miniEntries += 1UL; + } + + if ((miniEntries + startEntries) > maxEntries) + { + return kStatus_OutOfRange; + } + + for (i = startEntries; i < (miniEntries + startEntries); i++) + { + if (dataBytes > USDHC_ADMA2_DESCRIPTOR_MAX_LENGTH_PER_ENTRY) + { + dmaBufferLen = USDHC_ADMA2_DESCRIPTOR_MAX_LENGTH_PER_ENTRY; + } + else + { + dmaBufferLen = (dataBytes == 0UL ? sizeof(uint32_t) : + dataBytes); /* adma don't support 0 data length transfer descriptor */ + } + + /* Each descriptor for ADMA2 is 64-bit in length */ + adma2EntryAddress[i].address = (dataBytes == 0UL) ? &s_usdhcBootDummy : data; + adma2EntryAddress[i].attribute = (dmaBufferLen << USDHC_ADMA2_DESCRIPTOR_LENGTH_SHIFT); + adma2EntryAddress[i].attribute |= + (dataBytes == 0UL) ? + 0UL : + ((uint32_t)kUSDHC_Adma2DescriptorTypeTransfer | (uint32_t)kUSDHC_Adma2DescriptorInterruptFlag); + data = (uint32_t *)((uint32_t)data + dmaBufferLen); + + if (dataBytes != 0UL) + { + dataBytes -= dmaBufferLen; + } + } + + /* add a dummy valid ADMA descriptor for multiple descriptor mode, this is useful when transfer boot data, the ADMA + engine + will not stop at block gap */ + if (flags == (uint32_t)kUSDHC_AdmaDescriptorMultipleFlag) + { + adma2EntryAddress[startEntries + 1UL].attribute |= (uint32_t)kUSDHC_Adma2DescriptorTypeTransfer; + } + else + { + /* set the end bit */ + adma2EntryAddress[i - 1UL].attribute |= (uint32_t)kUSDHC_Adma2DescriptorEndFlag; + } + + return kStatus_Success; +} + +/*! + * brief Internal DMA configuration. + * This function is used to config the USDHC DMA related registers. + * param base USDHC peripheral base address. + * param adma configuration + * param dataAddr transfer data address, a simple DMA parameter, if ADMA is used, leave it to NULL. + * param enAutoCmd23 flag to indicate Auto CMD23 is enable or not, a simple DMA parameter,if ADMA is used, leave it to + * false. + * retval kStatus_OutOfRange ADMA descriptor table length isn't enough to describe data. + * retval kStatus_Success Operate successfully. + */ +status_t USDHC_SetInternalDmaConfig(USDHC_Type *base, + usdhc_adma_config_t *dmaConfig, + const uint32_t *dataAddr, + bool enAutoCmd23) +{ + assert(dmaConfig != NULL); + assert(dataAddr != NULL); + assert((NULL != dmaConfig->admaTable) && + (((USDHC_ADMA_TABLE_ADDRESS_ALIGN - 1U) & (uint32_t)dmaConfig->admaTable) == 0UL)); + +#if FSL_FEATURE_USDHC_HAS_EXT_DMA + /* disable the external DMA if support */ + base->VEND_SPEC &= ~USDHC_VEND_SPEC_EXT_DMA_EN_MASK; +#endif + + if (dmaConfig->dmaMode == kUSDHC_DmaModeSimple) + { + /* check DMA data buffer address align or not */ + if (((uint32_t)dataAddr % USDHC_ADMA2_ADDRESS_ALIGN) != 0UL) + { + return kStatus_USDHC_DMADataAddrNotAlign; + } + /* in simple DMA mode if use auto CMD23, address should load to ADMA addr, + and block count should load to DS_ADDR*/ + if (enAutoCmd23) + { + base->ADMA_SYS_ADDR = USDHC_ADDR_CPU_2_DMA((uint32_t)dataAddr); + } + else + { + base->DS_ADDR = USDHC_ADDR_CPU_2_DMA((uint32_t)dataAddr); + } + } + else + { + /* When use ADMA, disable simple DMA */ + base->DS_ADDR = 0UL; + base->ADMA_SYS_ADDR = USDHC_ADDR_CPU_2_DMA((uint32_t)(dmaConfig->admaTable)); + } + +#if (defined(FSL_FEATURE_USDHC_HAS_NO_RW_BURST_LEN) && FSL_FEATURE_USDHC_HAS_NO_RW_BURST_LEN) + /* select DMA mode and config the burst length */ + base->PROT_CTRL &= ~(USDHC_PROT_CTRL_DMASEL_MASK); + base->PROT_CTRL |= USDHC_PROT_CTRL_DMASEL(dmaConfig->dmaMode); +#else + /* select DMA mode and config the burst length */ + base->PROT_CTRL &= ~(USDHC_PROT_CTRL_DMASEL_MASK | USDHC_PROT_CTRL_BURST_LEN_EN_MASK); + base->PROT_CTRL |= USDHC_PROT_CTRL_DMASEL(dmaConfig->dmaMode) | USDHC_PROT_CTRL_BURST_LEN_EN(dmaConfig->burstLen); +#endif + /* enable DMA */ + base->MIX_CTRL |= USDHC_MIX_CTRL_DMAEN_MASK; + + return kStatus_Success; +} + +/*! + * brief Sets the DMA descriptor table configuration. + * A high level DMA descriptor configuration function. + * param base USDHC peripheral base address. + * param adma configuration + * param data Data descriptor + * param flags ADAM descriptor flag, used to indicate to create multiple or single descriptor, please + * reference _usdhc_adma_flag + * retval kStatus_OutOfRange ADMA descriptor table length isn't enough to describe data. + * retval kStatus_Success Operate successfully. + */ +status_t USDHC_SetAdmaTableConfig(USDHC_Type *base, + usdhc_adma_config_t *dmaConfig, + usdhc_data_t *dataConfig, + uint32_t flags) +{ + assert(NULL != dmaConfig); + assert((NULL != dmaConfig->admaTable) && + (((USDHC_ADMA_TABLE_ADDRESS_ALIGN - 1U) & (uint32_t)dmaConfig->admaTable) == 0UL)); + assert(NULL != dataConfig); + + status_t error = kStatus_Fail; + uint32_t bootDummyOffset = + dataConfig->dataType == (uint32_t)kUSDHC_TransferDataBootcontinous ? sizeof(uint32_t) : 0UL; + const uint32_t *data = (const uint32_t *)USDHC_ADDR_CPU_2_DMA((uint32_t)( + (uint32_t)((dataConfig->rxData == NULL) ? dataConfig->txData : dataConfig->rxData) + bootDummyOffset)); + uint32_t blockSize = dataConfig->blockSize * dataConfig->blockCount - bootDummyOffset; + +#if FSL_FEATURE_USDHC_HAS_EXT_DMA + if (dmaConfig->dmaMode == kUSDHC_ExternalDMA) + { + /* enable the external DMA */ + base->VEND_SPEC |= USDHC_VEND_SPEC_EXT_DMA_EN_MASK; + } + else +#endif + if (dmaConfig->dmaMode == kUSDHC_DmaModeSimple) + { + error = kStatus_Success; + } + else if (dmaConfig->dmaMode == kUSDHC_DmaModeAdma1) + { + error = USDHC_SetADMA1Descriptor(dmaConfig->admaTable, dmaConfig->admaTableWords, data, blockSize, flags); + } + /* ADMA2 */ + else + { + error = USDHC_SetADMA2Descriptor(dmaConfig->admaTable, dmaConfig->admaTableWords, data, blockSize, flags); + } + + /* for internal dma, internal DMA configurations should not update the configurations when continous transfer the + * boot data, only the DMA descriptor need update */ + if ((dmaConfig->dmaMode != kUSDHC_ExternalDMA) && (error == kStatus_Success) && + (dataConfig->dataType != (uint32_t)kUSDHC_TransferDataBootcontinous)) + { + error = USDHC_SetInternalDmaConfig(base, dmaConfig, data, dataConfig->enableAutoCommand23); + } + + return error; +} + +/*! + * brief Transfers the command/data using a blocking method. + * + * This function waits until the command response/data is received or the USDHC encounters an error by polling the + * status + * flag. + * The application must not call this API in multiple threads at the same time. Because of that this API doesn't support + * the re-entry mechanism. + * + * note There is no need to call the API 'USDHC_TransferCreateHandle' when calling this API. + * + * param base USDHC peripheral base address. + * param adma configuration + * param transfer Transfer content. + * retval kStatus_InvalidArgument Argument is invalid. + * retval kStatus_USDHC_PrepareAdmaDescriptorFailed Prepare ADMA descriptor failed. + * retval kStatus_USDHC_SendCommandFailed Send command failed. + * retval kStatus_USDHC_TransferDataFailed Transfer data failed. + * retval kStatus_Success Operate successfully. + */ +status_t USDHC_TransferBlocking(USDHC_Type *base, usdhc_adma_config_t *dmaConfig, usdhc_transfer_t *transfer) +{ + assert(transfer != NULL); + + status_t error = kStatus_Fail; + usdhc_command_t *command = transfer->command; + usdhc_data_t *data = transfer->data; + bool enDMA = true; + bool executeTuning = ((data == NULL) ? false : data->dataType == (uint32_t)kUSDHC_TransferDataTuning); + uint32_t transferFlags = (uint32_t)kUSDHC_CommandOnly; + size_t blockSize = 0U; + size_t blockCount = 0U; + +#if defined(FSL_FEATURE_USDHC_HAS_SDR50_MODE) && (FSL_FEATURE_USDHC_HAS_SDR50_MODE) + /*check re-tuning request*/ + if ((USDHC_GetInterruptStatusFlags(base) & (uint32_t)kUSDHC_ReTuningEventFlag) != 0UL) + { + USDHC_ClearInterruptStatusFlags(base, kUSDHC_ReTuningEventFlag); + return kStatus_USDHC_ReTuningRequest; + } +#endif + + if (data != NULL) + { + /* Update ADMA descriptor table according to different DMA mode(no DMA, ADMA1, ADMA2).*/ + if ((dmaConfig != NULL) && (!executeTuning)) + { + error = USDHC_SetAdmaTableConfig(base, dmaConfig, data, + (uint32_t)(IS_USDHC_FLAG_SET(data->dataType, kUSDHC_TransferDataBoot) ? + kUSDHC_AdmaDescriptorMultipleFlag : + kUSDHC_AdmaDescriptorSingleFlag)); + } + blockSize = data->blockSize; + blockCount = data->blockCount; + transferFlags = data->enableAutoCommand12 ? (uint32_t)kUSDHC_DataWithAutoCmd12 : 0U; + transferFlags |= data->enableAutoCommand23 ? (uint32_t)kUSDHC_DataWithAutoCmd23 : 0U; + transferFlags |= data->txData != NULL ? (uint32_t)kUSDHC_CommandAndTxData : (uint32_t)kUSDHC_CommandAndRxData; + transferFlags |= data->dataType == (uint8_t)kUSDHC_TransferDataBoot ? (uint32_t)kUSDHC_BootData : 0U; + transferFlags |= + data->dataType == (uint8_t)kUSDHC_TransferDataBootcontinous ? (uint32_t)kUSDHC_BootDataContinuous : 0U; + + command->flags |= (uint32_t)kUSDHC_DataPresentFlag; + } + + /* if the DMA desciptor configure fail or not needed , disable it */ + if (error != kStatus_Success) + { + enDMA = false; + /* disable DMA, using polling mode in this situation */ + USDHC_EnableInternalDMA(base, false); + } +#if defined(FSL_SDK_ENABLE_DRIVER_CACHE_CONTROL) && FSL_SDK_ENABLE_DRIVER_CACHE_CONTROL + else + { + if (data->txData != NULL) + { + /* clear the DCACHE */ + DCACHE_CleanByRange((uint32_t)data->txData, (data->blockSize) * (data->blockCount)); + } + else + { + /* clear the DCACHE */ + DCACHE_CleanInvalidateByRange((uint32_t)data->rxData, (data->blockSize) * (data->blockCount)); + } + } +#endif + + /* config the data transfer parameter */ + error = USDHC_SetTransferConfig(base, transferFlags, blockSize, blockCount); + if (error != kStatus_Success) + { + return error; + } + /* send command first */ + USDHC_SendCommand(base, command); + /* wait command done */ + error = + USDHC_WaitCommandDone(base, command, (data == NULL) || (data->dataType == (uint32_t)kUSDHC_TransferDataNormal)); + if (kStatus_Success != error) + { + return kStatus_USDHC_SendCommandFailed; + } + + /* wait transfer data finsih */ + if (data != NULL) + { + error = USDHC_TransferDataBlocking(base, data, enDMA); + if (kStatus_Success != error) + { + return error; + } + } + + return kStatus_Success; +} + +#if (defined FSL_USDHC_ENABLE_SCATTER_GATHER_TRANSFER) && FSL_USDHC_ENABLE_SCATTER_GATHER_TRANSFER +static status_t USDHC_SetScatterGatherAdmaTableConfig(USDHC_Type *base, + usdhc_adma_config_t *dmaConfig, + usdhc_scatter_gather_data_t *dataConfig, + uint32_t *totalTransferSize) +{ + assert(NULL != dmaConfig); + assert((NULL != dmaConfig->admaTable) && + (((USDHC_ADMA_TABLE_ADDRESS_ALIGN - 1U) & (uint32_t)dmaConfig->admaTable) == 0UL)); + assert(NULL != dataConfig); + + status_t error = kStatus_Fail; + uint32_t *admaDesBuffer = dmaConfig->admaTable; + uint32_t admaDesLen = dmaConfig->admaTableWords; + usdhc_scatter_gather_data_list_t *sgDataList = &dataConfig->sgData; + uint32_t oneDescriptorMaxTransferSize = dmaConfig->dmaMode == kUSDHC_DmaModeAdma1 ? + USDHC_ADMA1_DESCRIPTOR_MAX_LENGTH_PER_ENTRY : + USDHC_ADMA2_DESCRIPTOR_MAX_LENGTH_PER_ENTRY; + uint32_t miniEntries = 0U; + + while (sgDataList != NULL) + { + if (dmaConfig->dmaMode == kUSDHC_DmaModeAdma1) + { + error = USDHC_SetADMA1Descriptor(admaDesBuffer, admaDesLen, sgDataList->dataAddr, sgDataList->dataSize, 0U); + } + /* ADMA2 */ + else + { + error = USDHC_SetADMA2Descriptor(admaDesBuffer, admaDesLen, sgDataList->dataAddr, sgDataList->dataSize, 0U); + } + + if (error != kStatus_Success) + { + return kStatus_USDHC_PrepareAdmaDescriptorFailed; + } + +#if defined(FSL_SDK_ENABLE_DRIVER_CACHE_CONTROL) && FSL_SDK_ENABLE_DRIVER_CACHE_CONTROL + if (dataConfig->dataDirection == kUSDHC_TransferDirectionSend) + { + /* clear the DCACHE */ + DCACHE_CleanByRange((uint32_t)sgDataList->dataAddr, sgDataList->dataSize); + } + else + { + /* clear the DCACHE */ + DCACHE_CleanInvalidateByRange((uint32_t)sgDataList->dataAddr, sgDataList->dataSize); + } +#endif + + *totalTransferSize += sgDataList->dataSize; + if (sgDataList->dataList != NULL) + { + if ((sgDataList->dataSize % oneDescriptorMaxTransferSize) == 0UL) + { + miniEntries = sgDataList->dataSize / oneDescriptorMaxTransferSize; + } + else + { + miniEntries = ((sgDataList->dataSize / oneDescriptorMaxTransferSize) + 1UL); + } + if (dmaConfig->dmaMode == kUSDHC_DmaModeAdma1) + { + admaDesBuffer[miniEntries * 2U - 1U] &= ~kUSDHC_Adma1DescriptorEndFlag; + } + else + { + admaDesBuffer[miniEntries * 2U - 2U] &= ~kUSDHC_Adma2DescriptorEndFlag; + } + admaDesBuffer += miniEntries * 2U; + admaDesLen -= miniEntries * 2U; + } + + sgDataList = sgDataList->dataList; + } + + base->DS_ADDR = 0UL; + base->ADMA_SYS_ADDR = (uint32_t)(dmaConfig->admaTable); + + /* select DMA mode and config the burst length */ + base->PROT_CTRL &= ~(USDHC_PROT_CTRL_DMASEL_MASK); + base->PROT_CTRL |= USDHC_PROT_CTRL_DMASEL(dmaConfig->dmaMode); + + /* enable DMA */ + base->MIX_CTRL |= USDHC_MIX_CTRL_DMAEN_MASK; + + return error; +} + +/*! + * brief Transfers the command/scatter gather data using an interrupt and an asynchronous method. + * + * This function sends a command and data and returns immediately. It doesn't wait for the transfer to complete or + * to encounter an error. The application must not call this API in multiple threads at the same time. Because of that + * this API doesn't support the re-entry mechanism. + * This function is target for the application would like to have scatter gather buffer to be transferred within one + * read/write request, non scatter gather buffer is support by this function also. + * + * note Call API @ref USDHC_TransferCreateHandle when calling this API. + * + * param base USDHC peripheral base address. + * param handle USDHC handle. + * param dmaConfig adma configurations, must be not NULL, since the function is target for ADMA only. + * param transfer scatter gather transfer content. + * + * retval #kStatus_InvalidArgument Argument is invalid. + * retval #kStatus_USDHC_BusyTransferring Busy transferring. + * retval #kStatus_USDHC_PrepareAdmaDescriptorFailed Prepare ADMA descriptor failed. + * retval #kStatus_Success Operate successfully. + */ +status_t USDHC_TransferScatterGatherADMANonBlocking(USDHC_Type *base, + usdhc_handle_t *handle, + usdhc_adma_config_t *dmaConfig, + usdhc_scatter_gather_transfer_t *transfer) +{ + assert(handle != NULL); + assert(transfer != NULL); + assert(dmaConfig != NULL); + + status_t error = kStatus_Fail; + usdhc_command_t *command = transfer->command; + uint32_t totalTransferSize = 0U; + uint32_t transferFlags = kUSDHC_CommandOnly; + size_t blockSize = 0U; + size_t blockCount = 0U; + usdhc_scatter_gather_data_t *scatterGatherData = transfer->data; + bool enDMA = false; + + /* check data inhibit flag */ + if (IS_USDHC_FLAG_SET(base->PRES_STATE, kUSDHC_CommandInhibitFlag)) + { + return kStatus_USDHC_BusyTransferring; + } + + handle->command = command; + handle->data = scatterGatherData; + /* transferredWords will only be updated in ISR when transfer way is DATAPORT. */ + handle->transferredWords = 0UL; + + /* Update ADMA descriptor table according to different DMA mode(ADMA1, ADMA2).*/ + if (scatterGatherData != NULL) + { + if (scatterGatherData->sgData.dataAddr == NULL) + { + return kStatus_InvalidArgument; + } + + if (scatterGatherData->dataType != (uint32_t)kUSDHC_TransferDataTuning) + { + if (USDHC_SetScatterGatherAdmaTableConfig(base, dmaConfig, transfer->data, &totalTransferSize) != + kStatus_Success) + { + return kStatus_USDHC_PrepareAdmaDescriptorFailed; + } + + enDMA = true; + } + blockSize = scatterGatherData->blockSize; + blockCount = totalTransferSize / scatterGatherData->blockSize; + transferFlags = scatterGatherData->enableAutoCommand12 ? kUSDHC_DataWithAutoCmd12 : 0U; + transferFlags |= scatterGatherData->enableAutoCommand23 ? kUSDHC_DataWithAutoCmd23 : 0U; + transferFlags |= scatterGatherData->dataDirection == kUSDHC_TransferDirectionSend ? kUSDHC_CommandAndTxData : + kUSDHC_CommandAndRxData; + command->flags |= kUSDHC_DataPresentFlag; + } + + error = USDHC_SetTransferConfig(base, transferFlags, blockSize, blockCount); + if (error != kStatus_Success) + { + return error; + } + + /* enable interrupt per transfer request */ + if (scatterGatherData != NULL) + { + USDHC_ClearInterruptStatusFlags( + base, (uint32_t)(enDMA == false ? kUSDHC_DataFlag : kUSDHC_DataDMAFlag | kUSDHC_DmaCompleteFlag) | + (uint32_t)kUSDHC_CommandFlag); + USDHC_EnableInterruptSignal( + base, (uint32_t)(enDMA == false ? kUSDHC_DataFlag : kUSDHC_DataDMAFlag | kUSDHC_DmaCompleteFlag) | + (uint32_t)kUSDHC_CommandFlag); + } + else + { + USDHC_ClearInterruptStatusFlags(base, kUSDHC_CommandFlag); + USDHC_EnableInterruptSignal(base, kUSDHC_CommandFlag); + } + + /* send command first */ + USDHC_SendCommand(base, command); + + return kStatus_Success; +} +#else +/*! + * brief Transfers the command/data using an interrupt and an asynchronous method. + * + * This function sends a command and data and returns immediately. It doesn't wait the transfer complete or encounter an + * error. + * The application must not call this API in multiple threads at the same time. Because of that this API doesn't support + * the re-entry mechanism. + * + * note Call the API 'USDHC_TransferCreateHandle' when calling this API. + * + * param base USDHC peripheral base address. + * param handle USDHC handle. + * param adma configuration. + * param transfer Transfer content. + * retval kStatus_InvalidArgument Argument is invalid. + * retval kStatus_USDHC_BusyTransferring Busy transferring. + * retval kStatus_USDHC_PrepareAdmaDescriptorFailed Prepare ADMA descriptor failed. + * retval kStatus_Success Operate successfully. + */ +status_t USDHC_TransferNonBlocking(USDHC_Type *base, + usdhc_handle_t *handle, + usdhc_adma_config_t *dmaConfig, + usdhc_transfer_t *transfer) +{ + assert(handle != NULL); + assert(transfer != NULL); + + status_t error = kStatus_Fail; + usdhc_command_t *command = transfer->command; + usdhc_data_t *data = transfer->data; + bool executeTuning = ((data == NULL) ? false : data->dataType == (uint32_t)kUSDHC_TransferDataTuning); + bool enDMA = true; + uint32_t transferFlags = (uint32_t)kUSDHC_CommandOnly; + size_t blockSize = 0U; + size_t blockCount = 0U; + +#if defined(FSL_FEATURE_USDHC_HAS_SDR50_MODE) && (FSL_FEATURE_USDHC_HAS_SDR50_MODE) + /*check re-tuning request*/ + if ((USDHC_GetInterruptStatusFlags(base) & ((uint32_t)kUSDHC_ReTuningEventFlag)) != 0UL) + { + USDHC_ClearInterruptStatusFlags(base, kUSDHC_ReTuningEventFlag); + return kStatus_USDHC_ReTuningRequest; + } +#endif + /* Save command and data into handle before transferring. */ + + handle->command = command; + handle->data = data; + /* transferredWords will only be updated in ISR when transfer way is DATAPORT. */ + handle->transferredWords = 0UL; + + if (data != NULL) + { + /* Update ADMA descriptor table according to different DMA mode(no DMA, ADMA1, ADMA2).*/ + if ((dmaConfig != NULL) && (!executeTuning)) + { + error = USDHC_SetAdmaTableConfig( + base, dmaConfig, data, + (uint32_t)(IS_USDHC_FLAG_SET(data->dataType, (uint32_t)kUSDHC_TransferDataBoot) ? + kUSDHC_AdmaDescriptorMultipleFlag : + kUSDHC_AdmaDescriptorSingleFlag)); + } + + blockSize = data->blockSize; + blockCount = data->blockCount; + transferFlags = data->enableAutoCommand12 ? (uint32_t)kUSDHC_DataWithAutoCmd12 : 0U; + transferFlags |= data->enableAutoCommand23 ? (uint32_t)kUSDHC_DataWithAutoCmd23 : 0U; + transferFlags |= data->txData != NULL ? (uint32_t)kUSDHC_CommandAndTxData : (uint32_t)kUSDHC_CommandAndRxData; + transferFlags |= data->dataType == (uint8_t)kUSDHC_TransferDataBoot ? (uint32_t)kUSDHC_BootData : 0U; + transferFlags |= + data->dataType == (uint8_t)kUSDHC_TransferDataBootcontinous ? (uint32_t)kUSDHC_BootDataContinuous : 0U; + + command->flags |= (uint32_t)kUSDHC_DataPresentFlag; + } + + /* if the DMA desciptor configure fail or not needed , disable it */ + if (error != kStatus_Success) + { + /* disable DMA, using polling mode in this situation */ + USDHC_EnableInternalDMA(base, false); + enDMA = false; + } +#if defined(FSL_SDK_ENABLE_DRIVER_CACHE_CONTROL) && FSL_SDK_ENABLE_DRIVER_CACHE_CONTROL + else + { + if (data->txData != NULL) + { + /* clear the DCACHE */ + DCACHE_CleanByRange((uint32_t)data->txData, (data->blockSize) * (data->blockCount)); + } + else + { + /* clear the DCACHE */ + DCACHE_CleanInvalidateByRange((uint32_t)data->rxData, (data->blockSize) * (data->blockCount)); + } + } +#endif + + /* config the data transfer parameter */ + error = USDHC_SetTransferConfig(base, transferFlags, blockSize, blockCount); + if (error != kStatus_Success) + { + return error; + } + + /* enable interrupt per transfer request */ + if (handle->data != NULL) + { + USDHC_ClearInterruptStatusFlags( + base, (uint32_t)(enDMA == false ? kUSDHC_DataFlag : kUSDHC_DataDMAFlag) | (uint32_t)kUSDHC_CommandFlag | + (uint32_t)(data->dataType == (uint8_t)kUSDHC_TransferDataBootcontinous ? + (uint32_t)kUSDHC_DmaCompleteFlag : + 0U)); + USDHC_EnableInterruptSignal(base, (uint32_t)(enDMA == false ? kUSDHC_DataFlag : kUSDHC_DataDMAFlag) | + (uint32_t)kUSDHC_CommandFlag | + (uint32_t)(data->dataType == (uint8_t)kUSDHC_TransferDataBootcontinous ? + (uint32_t)kUSDHC_DmaCompleteFlag : + 0U)); + } + else + { + USDHC_ClearInterruptStatusFlags(base, kUSDHC_CommandFlag); + USDHC_EnableInterruptSignal(base, kUSDHC_CommandFlag); + } + + /* send command first */ + USDHC_SendCommand(base, command); + + return kStatus_Success; +} +#endif + +#if defined(FSL_FEATURE_USDHC_HAS_SDR50_MODE) && (FSL_FEATURE_USDHC_HAS_SDR50_MODE) +/*! + * brief manual tuning trigger or abort + * User should handle the tuning cmd and find the boundary of the delay + * then calucate a average value which will be config to the CLK_TUNE_CTRL_STATUS + * This function should called before USDHC_AdjustDelayforSDR104 function + * param base USDHC peripheral base address. + * param tuning enable flag + */ +void USDHC_EnableManualTuning(USDHC_Type *base, bool enable) +{ + if (enable) + { + /* make sure std_tun_en bit is clear */ + base->TUNING_CTRL &= ~USDHC_TUNING_CTRL_STD_TUNING_EN_MASK; + /* disable auto tuning here */ + base->MIX_CTRL &= ~USDHC_MIX_CTRL_AUTO_TUNE_EN_MASK; + /* execute tuning for SDR104 mode */ + base->MIX_CTRL |= USDHC_MIX_CTRL_EXE_TUNE_MASK | USDHC_MIX_CTRL_SMP_CLK_SEL_MASK; + } + else + { /* abort the tuning */ + base->MIX_CTRL &= ~USDHC_MIX_CTRL_EXE_TUNE_MASK; + } +} + +/*! + * brief the SDR104 mode delay setting adjust + * This function should called after USDHC_ManualTuningForSDR104 + * param base USDHC peripheral base address. + * param delay setting configuration + * retval kStatus_Fail config the delay setting fail + * retval kStatus_Success config the delay setting success + */ +status_t USDHC_AdjustDelayForManualTuning(USDHC_Type *base, uint32_t delay) +{ + uint32_t clkTuneCtrl = 0UL; + + clkTuneCtrl = base->CLK_TUNE_CTRL_STATUS; + + clkTuneCtrl &= ~USDHC_CLK_TUNE_CTRL_STATUS_DLY_CELL_SET_PRE_MASK; + + clkTuneCtrl |= USDHC_CLK_TUNE_CTRL_STATUS_DLY_CELL_SET_PRE(delay); + + /* load the delay setting */ + base->CLK_TUNE_CTRL_STATUS = clkTuneCtrl; + /* check delat setting error */ + if (IS_USDHC_FLAG_SET(base->CLK_TUNE_CTRL_STATUS, + USDHC_CLK_TUNE_CTRL_STATUS_PRE_ERR_MASK | USDHC_CLK_TUNE_CTRL_STATUS_NXT_ERR_MASK)) + { + return kStatus_Fail; + } + + return kStatus_Success; +} + +/*! + * brief The tuning delay cell setting. + * + * param base USDHC peripheral base address. + * param preDelay Set the number of delay cells on the feedback clock between the feedback clock and CLK_PRE. + * param outDelay Set the number of delay cells on the feedback clock between CLK_PRE and CLK_OUT. + * param postDelay Set the number of delay cells on the feedback clock between CLK_OUT and CLK_POST. + * retval kStatus_Fail config the delay setting fail + * retval kStatus_Success config the delay setting success + */ +status_t USDHC_SetTuningDelay(USDHC_Type *base, uint32_t preDelay, uint32_t outDelay, uint32_t postDelay) +{ + assert(preDelay <= + (USDHC_CLK_TUNE_CTRL_STATUS_DLY_CELL_SET_PRE_MASK >> USDHC_CLK_TUNE_CTRL_STATUS_DLY_CELL_SET_PRE_SHIFT)); + assert(outDelay <= + (USDHC_CLK_TUNE_CTRL_STATUS_DLY_CELL_SET_OUT_MASK >> USDHC_CLK_TUNE_CTRL_STATUS_DLY_CELL_SET_OUT_SHIFT)); + assert(postDelay <= + (USDHC_CLK_TUNE_CTRL_STATUS_DLY_CELL_SET_POST_MASK >> USDHC_CLK_TUNE_CTRL_STATUS_DLY_CELL_SET_POST_SHIFT)); + + uint32_t clkTuneCtrl = 0UL; + + clkTuneCtrl = base->CLK_TUNE_CTRL_STATUS; + + clkTuneCtrl &= + ~(USDHC_CLK_TUNE_CTRL_STATUS_DLY_CELL_SET_PRE_MASK | USDHC_CLK_TUNE_CTRL_STATUS_DLY_CELL_SET_OUT_MASK | + USDHC_CLK_TUNE_CTRL_STATUS_DLY_CELL_SET_POST_MASK); + + clkTuneCtrl |= USDHC_CLK_TUNE_CTRL_STATUS_DLY_CELL_SET_PRE(preDelay) | + USDHC_CLK_TUNE_CTRL_STATUS_DLY_CELL_SET_OUT(outDelay) | + USDHC_CLK_TUNE_CTRL_STATUS_DLY_CELL_SET_POST(postDelay); + + /* load the delay setting */ + base->CLK_TUNE_CTRL_STATUS = clkTuneCtrl; + /* check delat setting error */ + if (IS_USDHC_FLAG_SET(base->CLK_TUNE_CTRL_STATUS, + USDHC_CLK_TUNE_CTRL_STATUS_PRE_ERR_MASK | USDHC_CLK_TUNE_CTRL_STATUS_NXT_ERR_MASK)) + { + return kStatus_Fail; + } + + return kStatus_Success; +} + +/*! + * brief the enable standard tuning function + * The standard tuning window and tuning counter use the default config + * tuning cmd is send by the software, user need to check the tuning result + * can be used for SDR50,SDR104,HS200 mode tuning + * param base USDHC peripheral base address. + * param tuning start tap + * param tuning step + * param enable/disable flag + */ +void USDHC_EnableStandardTuning(USDHC_Type *base, uint32_t tuningStartTap, uint32_t step, bool enable) +{ + uint32_t tuningCtrl = 0UL; + + if (enable) + { + /* feedback clock */ + base->MIX_CTRL |= USDHC_MIX_CTRL_FBCLK_SEL_MASK; + /* config tuning start and step */ + tuningCtrl = base->TUNING_CTRL; + tuningCtrl &= ~(USDHC_TUNING_CTRL_TUNING_START_TAP_MASK | USDHC_TUNING_CTRL_TUNING_STEP_MASK); + tuningCtrl |= (USDHC_TUNING_CTRL_TUNING_START_TAP(tuningStartTap) | USDHC_TUNING_CTRL_TUNING_STEP(step) | + USDHC_TUNING_CTRL_STD_TUNING_EN_MASK); + base->TUNING_CTRL = tuningCtrl; + + /* excute tuning */ + base->AUTOCMD12_ERR_STATUS |= + (USDHC_AUTOCMD12_ERR_STATUS_EXECUTE_TUNING_MASK | USDHC_AUTOCMD12_ERR_STATUS_SMP_CLK_SEL_MASK); + } + else + { + /* disable the standard tuning */ + base->TUNING_CTRL &= ~USDHC_TUNING_CTRL_STD_TUNING_EN_MASK; + /* clear excute tuning */ + base->AUTOCMD12_ERR_STATUS &= + ~(USDHC_AUTOCMD12_ERR_STATUS_EXECUTE_TUNING_MASK | USDHC_AUTOCMD12_ERR_STATUS_SMP_CLK_SEL_MASK); + } +} + +#if FSL_FEATURE_USDHC_HAS_HS400_MODE +/*! + * brief config the strobe DLL delay target and update interval + * + * param base USDHC peripheral base address. + * param delayTarget delay target + * param updateInterval update interval + */ +void USDHC_ConfigStrobeDLL(USDHC_Type *base, uint32_t delayTarget, uint32_t updateInterval) +{ + assert(delayTarget <= (USDHC_STROBE_DLL_CTRL_STROBE_DLL_CTRL_SLV_DLY_TARGET_MASK >> + USDHC_STROBE_DLL_CTRL_STROBE_DLL_CTRL_SLV_DLY_TARGET_SHIFT)); + + /* reset strobe dll firstly */ + base->STROBE_DLL_CTRL |= USDHC_STROBE_DLL_CTRL_STROBE_DLL_CTRL_RESET_MASK; + /* clear reset and other register fields */ + base->STROBE_DLL_CTRL = 0; + /* configure the DELAY target and update interval */ + base->STROBE_DLL_CTRL |= USDHC_STROBE_DLL_CTRL_STROBE_DLL_CTRL_ENABLE_MASK | + USDHC_STROBE_DLL_CTRL_STROBE_DLL_CTRL_SLV_UPDATE_INT(updateInterval) | + USDHC_STROBE_DLL_CTRL_STROBE_DLL_CTRL_SLV_DLY_TARGET(delayTarget); + + while ( + (USDHC_GetStrobeDLLStatus(base) & (USDHC_STROBE_DLL_STATUS_STROBE_DLL_STS_SLV_LOCK_MASK | + USDHC_STROBE_DLL_STATUS_STROBE_DLL_STS_REF_LOCK_MASK)) != + ((USDHC_STROBE_DLL_STATUS_STROBE_DLL_STS_SLV_LOCK_MASK | USDHC_STROBE_DLL_STATUS_STROBE_DLL_STS_REF_LOCK_MASK))) + { + } +} +#endif + +/*! + * brief the auto tuning enbale for CMD/DATA line + * + * param base USDHC peripheral base address. + */ +void USDHC_EnableAutoTuningForCmdAndData(USDHC_Type *base) +{ + uint32_t busWidth = (base->PROT_CTRL & USDHC_PROT_CTRL_DTW_MASK) >> USDHC_PROT_CTRL_DTW_SHIFT; + + base->VEND_SPEC2 |= USDHC_VEND_SPEC2_TUNING_CMD_EN_MASK; + + /* 1bit data width */ + if (busWidth == 0UL) + { + base->VEND_SPEC2 &= ~USDHC_VEND_SPEC2_TUNING_8bit_EN_MASK; + base->VEND_SPEC2 |= USDHC_VEND_SPEC2_TUNING_1bit_EN_MASK; + } + /* 4bit data width */ + else if (busWidth == 1UL) + { + base->VEND_SPEC2 &= ~USDHC_VEND_SPEC2_TUNING_8bit_EN_MASK; + base->VEND_SPEC2 &= ~USDHC_VEND_SPEC2_TUNING_1bit_EN_MASK; + } + /* 8bit data width */ + else + { + base->VEND_SPEC2 |= USDHC_VEND_SPEC2_TUNING_8bit_EN_MASK; + base->VEND_SPEC2 &= ~USDHC_VEND_SPEC2_TUNING_1bit_EN_MASK; + } +} +#endif /* FSL_FEATURE_USDHC_HAS_SDR50_MODE */ + +static void USDHC_TransferHandleCardDetect(USDHC_Type *base, usdhc_handle_t *handle, uint32_t interruptFlags) +{ + if (IS_USDHC_FLAG_SET(interruptFlags, kUSDHC_CardInsertionFlag)) + { + if (handle->callback.CardInserted != NULL) + { + handle->callback.CardInserted(base, handle->userData); + } + } + else + { + if (handle->callback.CardRemoved != NULL) + { + handle->callback.CardRemoved(base, handle->userData); + } + } +} + +static void USDHC_TransferHandleCommand(USDHC_Type *base, usdhc_handle_t *handle, uint32_t interruptFlags) +{ + assert(handle->command != NULL); + + if (IS_USDHC_FLAG_SET(interruptFlags, kUSDHC_CommandErrorFlag)) + { + if (handle->callback.TransferComplete != NULL) + { + handle->callback.TransferComplete(base, handle, kStatus_USDHC_SendCommandFailed, handle->userData); + } + } + else + { + /* Receive response */ + if (kStatus_Success != USDHC_ReceiveCommandResponse(base, handle->command)) + { + if (handle->callback.TransferComplete != NULL) + { + handle->callback.TransferComplete(base, handle, kStatus_USDHC_SendCommandFailed, handle->userData); + } + } + else + { + if (handle->callback.TransferComplete != NULL) + { + handle->callback.TransferComplete(base, handle, kStatus_USDHC_SendCommandSuccess, handle->userData); + } + } + } + /* disable interrupt signal and reset command pointer */ + USDHC_DisableInterruptSignal(base, kUSDHC_CommandFlag); + handle->command = NULL; +} + +#if (defined FSL_USDHC_ENABLE_SCATTER_GATHER_TRANSFER) && FSL_USDHC_ENABLE_SCATTER_GATHER_TRANSFER +static void USDHC_TransferHandleData(USDHC_Type *base, usdhc_handle_t *handle, uint32_t interruptFlags) +{ + assert(handle->data != NULL); + + status_t transferStatus = kStatus_USDHC_BusyTransferring; + + if ((!(handle->data->enableIgnoreError)) && + (IS_USDHC_FLAG_SET(interruptFlags, (uint32_t)kUSDHC_DataErrorFlag | (uint32_t)kUSDHC_DmaErrorFlag))) + { + transferStatus = kStatus_USDHC_TransferDataFailed; + } + else + { + if (IS_USDHC_FLAG_SET(interruptFlags, kUSDHC_BufferReadReadyFlag)) + { + /* std tuning process only need to wait BRR */ + if (handle->data->dataType == (uint32_t)kUSDHC_TransferDataTuning) + { + transferStatus = kStatus_USDHC_TransferDataComplete; + } + } + else + { + if (IS_USDHC_FLAG_SET(interruptFlags, kUSDHC_DmaCompleteFlag)) + { + transferStatus = kStatus_USDHC_TransferDMAComplete; + } + + if (IS_USDHC_FLAG_SET(interruptFlags, kUSDHC_DataCompleteFlag)) + { + transferStatus = kStatus_USDHC_TransferDataComplete; + +#if defined(FSL_SDK_ENABLE_DRIVER_CACHE_CONTROL) && FSL_SDK_ENABLE_DRIVER_CACHE_CONTROL + if (handle->data->dataDirection == kUSDHC_TransferDirectionReceive) + { + usdhc_scatter_gather_data_list_t *sgDataList = &handle->data->sgData; + while (sgDataList != NULL) + { + DCACHE_InvalidateByRange((uint32_t)sgDataList->dataAddr, sgDataList->dataSize); + sgDataList = sgDataList->dataList; + } + } +#endif + } + } + } + + if ((handle->callback.TransferComplete != NULL) && (transferStatus != kStatus_USDHC_BusyTransferring)) + { + handle->callback.TransferComplete(base, handle, transferStatus, handle->userData); + USDHC_DisableInterruptSignal( + base, (uint32_t)kUSDHC_DataFlag | (uint32_t)kUSDHC_DataDMAFlag | (uint32_t)kUSDHC_DmaCompleteFlag); + handle->data = NULL; + } +} + +#else +static void USDHC_TransferHandleData(USDHC_Type *base, usdhc_handle_t *handle, uint32_t interruptFlags) +{ + assert(handle->data != NULL); + + status_t transferStatus = kStatus_USDHC_BusyTransferring; + uint32_t transferredWords = handle->transferredWords; + + if ((!(handle->data->enableIgnoreError)) && + (IS_USDHC_FLAG_SET(interruptFlags, (uint32_t)kUSDHC_DataErrorFlag | (uint32_t)kUSDHC_DmaErrorFlag))) + { + transferStatus = kStatus_USDHC_TransferDataFailed; + } + else + { + if (IS_USDHC_FLAG_SET(interruptFlags, kUSDHC_BufferReadReadyFlag)) + { + /* std tuning process only need to wait BRR */ + if (handle->data->dataType == (uint32_t)kUSDHC_TransferDataTuning) + { + transferStatus = kStatus_USDHC_TransferDataComplete; + } + else + { + handle->transferredWords = USDHC_ReadDataPort(base, handle->data, transferredWords); + } + } + else if (IS_USDHC_FLAG_SET(interruptFlags, kUSDHC_BufferWriteReadyFlag)) + { + handle->transferredWords = USDHC_WriteDataPort(base, handle->data, transferredWords); + } + else + { + if ((IS_USDHC_FLAG_SET(interruptFlags, kUSDHC_DmaCompleteFlag)) && + (handle->data->dataType == (uint32_t)kUSDHC_TransferDataBootcontinous)) + { + *(handle->data->rxData) = s_usdhcBootDummy; + } + + if (IS_USDHC_FLAG_SET(interruptFlags, kUSDHC_DataCompleteFlag)) + { + transferStatus = kStatus_USDHC_TransferDataComplete; + +#if defined(FSL_SDK_ENABLE_DRIVER_CACHE_CONTROL) && FSL_SDK_ENABLE_DRIVER_CACHE_CONTROL + if (handle->data->rxData != NULL) + { + DCACHE_InvalidateByRange((uint32_t)(handle->data->rxData), + (handle->data->blockSize) * (handle->data->blockCount)); + } +#endif + } + } + } + + if ((handle->callback.TransferComplete != NULL) && (transferStatus != kStatus_USDHC_BusyTransferring)) + { + handle->callback.TransferComplete(base, handle, transferStatus, handle->userData); + USDHC_DisableInterruptSignal(base, (uint32_t)kUSDHC_DataFlag | (uint32_t)kUSDHC_DataDMAFlag); + handle->data = NULL; + } +} +#endif + +static void USDHC_TransferHandleSdioInterrupt(USDHC_Type *base, usdhc_handle_t *handle) +{ + if (handle->callback.SdioInterrupt != NULL) + { + handle->callback.SdioInterrupt(base, handle->userData); + } +} + +#if defined(FSL_FEATURE_USDHC_HAS_SDR50_MODE) && (FSL_FEATURE_USDHC_HAS_SDR50_MODE) +static void USDHC_TransferHandleReTuning(USDHC_Type *base, usdhc_handle_t *handle, uint32_t interruptFlags) +{ + assert(handle->callback.ReTuning != NULL); + /* retuning request */ + if (IS_USDHC_FLAG_SET(interruptFlags, kUSDHC_TuningErrorFlag)) + { + handle->callback.ReTuning(base, handle->userData); /* retuning fail */ + } +} +#endif + +static void USDHC_TransferHandleBlockGap(USDHC_Type *base, usdhc_handle_t *handle) +{ + if (handle->callback.BlockGap != NULL) + { + handle->callback.BlockGap(base, handle->userData); + } +} + +/*! + * brief Creates the USDHC handle. + * + * param base USDHC peripheral base address. + * param handle USDHC handle pointer. + * param callback Structure pointer to contain all callback functions. + * param userData Callback function parameter. + */ +void USDHC_TransferCreateHandle(USDHC_Type *base, + usdhc_handle_t *handle, + const usdhc_transfer_callback_t *callback, + void *userData) +{ + assert(handle != NULL); + assert(callback != NULL); + + /* Zero the handle. */ + (void)memset(handle, 0, sizeof(*handle)); + + /* Set the callback. */ + handle->callback.CardInserted = callback->CardInserted; + handle->callback.CardRemoved = callback->CardRemoved; + handle->callback.SdioInterrupt = callback->SdioInterrupt; + handle->callback.BlockGap = callback->BlockGap; + handle->callback.TransferComplete = callback->TransferComplete; + handle->callback.ReTuning = callback->ReTuning; + handle->userData = userData; + + /* Save the handle in global variables to support the double weak mechanism. */ + s_usdhcHandle[USDHC_GetInstance(base)] = handle; + + /* save IRQ handler */ + s_usdhcIsr = USDHC_TransferHandleIRQ; + + (void)EnableIRQ(s_usdhcIRQ[USDHC_GetInstance(base)]); +} + +/*! + * brief IRQ handler for the USDHC. + * + * This function deals with the IRQs on the given host controller. + * + * param base USDHC peripheral base address. + * param handle USDHC handle. + */ +void USDHC_TransferHandleIRQ(USDHC_Type *base, usdhc_handle_t *handle) +{ + assert(handle != NULL); + + uint32_t interruptFlags; + + interruptFlags = USDHC_GetEnabledInterruptStatusFlags(base); + + if (IS_USDHC_FLAG_SET(interruptFlags, kUSDHC_CardDetectFlag)) + { + USDHC_TransferHandleCardDetect(base, handle, interruptFlags); + } + if (IS_USDHC_FLAG_SET(interruptFlags, kUSDHC_CommandFlag)) + { + USDHC_TransferHandleCommand(base, handle, interruptFlags); + } + if (IS_USDHC_FLAG_SET(interruptFlags, kUSDHC_DataFlag)) + { + USDHC_TransferHandleData(base, handle, interruptFlags); + } + if (IS_USDHC_FLAG_SET(interruptFlags, kUSDHC_CardInterruptFlag)) + { + USDHC_TransferHandleSdioInterrupt(base, handle); + } + if (IS_USDHC_FLAG_SET(interruptFlags, kUSDHC_BlockGapEventFlag)) + { + USDHC_TransferHandleBlockGap(base, handle); + } +#if defined(FSL_FEATURE_USDHC_HAS_SDR50_MODE) && (FSL_FEATURE_USDHC_HAS_SDR50_MODE) + if (IS_USDHC_FLAG_SET(interruptFlags, kUSDHC_SDR104TuningFlag)) + { + USDHC_TransferHandleReTuning(base, handle, interruptFlags); + } +#endif + USDHC_ClearInterruptStatusFlags(base, interruptFlags); +} + +#ifdef USDHC0 +void USDHC0_DriverIRQHandler(void); +void USDHC0_DriverIRQHandler(void) +{ + s_usdhcIsr(s_usdhcBase[0U], s_usdhcHandle[0U]); + SDK_ISR_EXIT_BARRIER; +} +#endif + +#ifdef USDHC1 +void USDHC1_DriverIRQHandler(void); +void USDHC1_DriverIRQHandler(void) +{ + s_usdhcIsr(s_usdhcBase[1U], s_usdhcHandle[1U]); + SDK_ISR_EXIT_BARRIER; +} +#endif + +#ifdef USDHC2 +void USDHC2_DriverIRQHandler(void); +void USDHC2_DriverIRQHandler(void) +{ + s_usdhcIsr(s_usdhcBase[2U], s_usdhcHandle[2U]); + SDK_ISR_EXIT_BARRIER; +} + +#endif diff --git a/bsps/arm/imxrt/mcux-sdk/drivers/usdhc/fsl_usdhc.h b/bsps/arm/imxrt/mcux-sdk/drivers/usdhc/fsl_usdhc.h new file mode 100644 index 0000000000..9cf1fc07c3 --- /dev/null +++ b/bsps/arm/imxrt/mcux-sdk/drivers/usdhc/fsl_usdhc.h @@ -0,0 +1,1703 @@ +/* + * Copyright (c) 2016, Freescale Semiconductor, Inc. + * Copyright 2016-2021 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ +#ifndef _FSL_USDHC_H_ +#define _FSL_USDHC_H_ + +#include "fsl_common.h" + +/*! + * @addtogroup usdhc + * @{ + */ + +/****************************************************************************** + * Definitions. + *****************************************************************************/ + +/*! @name Driver version */ +/*@{*/ +/*! @brief Driver version 2.8.2. */ +#define FSL_USDHC_DRIVER_VERSION (MAKE_VERSION(2U, 8U, 2U)) +/*@}*/ + +/*! @brief Maximum block count can be set one time */ +#define USDHC_MAX_BLOCK_COUNT (USDHC_BLK_ATT_BLKCNT_MASK >> USDHC_BLK_ATT_BLKCNT_SHIFT) + +/*! @brief USDHC scatter gather feature control macro */ +#ifndef FSL_USDHC_ENABLE_SCATTER_GATHER_TRANSFER +#define FSL_USDHC_ENABLE_SCATTER_GATHER_TRANSFER 0U +#endif + +/*! @brief Enum _usdhc_status. USDHC status. */ +enum +{ + kStatus_USDHC_BusyTransferring = MAKE_STATUS(kStatusGroup_USDHC, 0U), /*!< Transfer is on-going. */ + kStatus_USDHC_PrepareAdmaDescriptorFailed = MAKE_STATUS(kStatusGroup_USDHC, 1U), /*!< Set DMA descriptor failed. */ + kStatus_USDHC_SendCommandFailed = MAKE_STATUS(kStatusGroup_USDHC, 2U), /*!< Send command failed. */ + kStatus_USDHC_TransferDataFailed = MAKE_STATUS(kStatusGroup_USDHC, 3U), /*!< Transfer data failed. */ + kStatus_USDHC_DMADataAddrNotAlign = MAKE_STATUS(kStatusGroup_USDHC, 4U), /*!< Data address not aligned. */ + kStatus_USDHC_ReTuningRequest = MAKE_STATUS(kStatusGroup_USDHC, 5U), /*!< Re-tuning request. */ + kStatus_USDHC_TuningError = MAKE_STATUS(kStatusGroup_USDHC, 6U), /*!< Tuning error. */ + kStatus_USDHC_NotSupport = MAKE_STATUS(kStatusGroup_USDHC, 7U), /*!< Not support. */ + kStatus_USDHC_TransferDataComplete = MAKE_STATUS(kStatusGroup_USDHC, 8U), /*!< Transfer data complete. */ + kStatus_USDHC_SendCommandSuccess = MAKE_STATUS(kStatusGroup_USDHC, 9U), /*!< Transfer command complete. */ + kStatus_USDHC_TransferDMAComplete = MAKE_STATUS(kStatusGroup_USDHC, 10U), /*!< Transfer DMA complete. */ +}; + +/*! @brief Enum _usdhc_capability_flag. Host controller capabilities flag mask. + * @anchor _usdhc_capability_flag + */ +enum +{ + kUSDHC_SupportAdmaFlag = USDHC_HOST_CTRL_CAP_ADMAS_MASK, /*!< Support ADMA. */ + kUSDHC_SupportHighSpeedFlag = USDHC_HOST_CTRL_CAP_HSS_MASK, /*!< Support high-speed. */ + kUSDHC_SupportDmaFlag = USDHC_HOST_CTRL_CAP_DMAS_MASK, /*!< Support DMA. */ + kUSDHC_SupportSuspendResumeFlag = USDHC_HOST_CTRL_CAP_SRS_MASK, /*!< Support suspend/resume. */ + kUSDHC_SupportV330Flag = USDHC_HOST_CTRL_CAP_VS33_MASK, /*!< Support voltage 3.3V. */ + kUSDHC_SupportV300Flag = USDHC_HOST_CTRL_CAP_VS30_MASK, /*!< Support voltage 3.0V. */ + kUSDHC_SupportV180Flag = USDHC_HOST_CTRL_CAP_VS18_MASK, /*!< Support voltage 1.8V. */ + kUSDHC_Support4BitFlag = (USDHC_HOST_CTRL_CAP_MBL_SHIFT << 0U), + /*!< Flag in HTCAPBLT_MBL's position, supporting 4-bit mode. */ + kUSDHC_Support8BitFlag = (USDHC_HOST_CTRL_CAP_MBL_SHIFT << 1U), + /*!< Flag in HTCAPBLT_MBL's position, supporting 8-bit mode. */ + kUSDHC_SupportDDR50Flag = USDHC_HOST_CTRL_CAP_DDR50_SUPPORT_MASK, +/*!< SD version 3.0 new feature, supporting DDR50 mode. */ + +#if defined(FSL_FEATURE_USDHC_HAS_SDR104_MODE) && (!FSL_FEATURE_USDHC_HAS_SDR104_MODE) + kUSDHC_SupportSDR104Flag = 0, /*!< not support SDR104 mode */ +#else + kUSDHC_SupportSDR104Flag = USDHC_HOST_CTRL_CAP_SDR104_SUPPORT_MASK, /*!< Support SDR104 mode. */ +#endif +#if defined(FSL_FEATURE_USDHC_HAS_SDR50_MODE) && (!FSL_FEATURE_USDHC_HAS_SDR50_MODE) + kUSDHC_SupportSDR50Flag = 0U, /*!< not support SDR50 mode */ +#else + kUSDHC_SupportSDR50Flag = USDHC_HOST_CTRL_CAP_SDR50_SUPPORT_MASK, /*!< Support SDR50 mode. */ +#endif +}; + +/*! @brief Enum _usdhc_wakeup_event. Wakeup event mask. + * @anchor _usdhc_wakeup_event + */ +enum +{ + kUSDHC_WakeupEventOnCardInt = USDHC_PROT_CTRL_WECINT_MASK, /*!< Wakeup on card interrupt. */ + kUSDHC_WakeupEventOnCardInsert = USDHC_PROT_CTRL_WECINS_MASK, /*!< Wakeup on card insertion. */ + kUSDHC_WakeupEventOnCardRemove = USDHC_PROT_CTRL_WECRM_MASK, /*!< Wakeup on card removal. */ + kUSDHC_WakeupEventsAll = + (kUSDHC_WakeupEventOnCardInt | kUSDHC_WakeupEventOnCardInsert | kUSDHC_WakeupEventOnCardRemove), + /*!< All wakeup events */ +}; + +/*! @brief Enum _usdhc_reset. Reset type mask. + * @anchor _usdhc_reset + */ +enum +{ + kUSDHC_ResetAll = USDHC_SYS_CTRL_RSTA_MASK, /*!< Reset all except card detection. */ + kUSDHC_ResetCommand = USDHC_SYS_CTRL_RSTC_MASK, /*!< Reset command line. */ + kUSDHC_ResetData = USDHC_SYS_CTRL_RSTD_MASK, /*!< Reset data line. */ + +#if defined(FSL_FEATURE_USDHC_HAS_SDR50_MODE) && (!FSL_FEATURE_USDHC_HAS_SDR50_MODE) + kUSDHC_ResetTuning = 0U, /*!< no reset tuning circuit bit */ +#else + kUSDHC_ResetTuning = USDHC_SYS_CTRL_RSTT_MASK, /*!< Reset tuning circuit. */ +#endif + + kUSDHC_ResetsAll = (kUSDHC_ResetAll | kUSDHC_ResetCommand | kUSDHC_ResetData | kUSDHC_ResetTuning), + /*!< All reset types */ +}; + +/*! @brief Enum _usdhc_transfer_flag. Transfer flag mask. */ +enum +{ + kUSDHC_EnableDmaFlag = USDHC_MIX_CTRL_DMAEN_MASK, /*!< Enable DMA. */ + + kUSDHC_CommandTypeSuspendFlag = USDHC_CMD_XFR_TYP_CMDTYP(1U), /*!< Suspend command. */ + kUSDHC_CommandTypeResumeFlag = USDHC_CMD_XFR_TYP_CMDTYP(2U), /*!< Resume command. */ + kUSDHC_CommandTypeAbortFlag = USDHC_CMD_XFR_TYP_CMDTYP(3U), /*!< Abort command. */ + + kUSDHC_EnableBlockCountFlag = USDHC_MIX_CTRL_BCEN_MASK, /*!< Enable block count. */ + kUSDHC_EnableAutoCommand12Flag = USDHC_MIX_CTRL_AC12EN_MASK, /*!< Enable auto CMD12. */ + kUSDHC_DataReadFlag = USDHC_MIX_CTRL_DTDSEL_MASK, /*!< Enable data read. */ + kUSDHC_MultipleBlockFlag = USDHC_MIX_CTRL_MSBSEL_MASK, /*!< Multiple block data read/write. */ + kUSDHC_EnableAutoCommand23Flag = USDHC_MIX_CTRL_AC23EN_MASK, /*!< Enable auto CMD23. */ + + kUSDHC_ResponseLength136Flag = USDHC_CMD_XFR_TYP_RSPTYP(1U), /*!< 136-bit response length. */ + kUSDHC_ResponseLength48Flag = USDHC_CMD_XFR_TYP_RSPTYP(2U), /*!< 48-bit response length. */ + kUSDHC_ResponseLength48BusyFlag = USDHC_CMD_XFR_TYP_RSPTYP(3U), /*!< 48-bit response length with busy status. */ + + kUSDHC_EnableCrcCheckFlag = USDHC_CMD_XFR_TYP_CCCEN_MASK, /*!< Enable CRC check. */ + kUSDHC_EnableIndexCheckFlag = USDHC_CMD_XFR_TYP_CICEN_MASK, /*!< Enable index check. */ + kUSDHC_DataPresentFlag = USDHC_CMD_XFR_TYP_DPSEL_MASK, /*!< Data present flag. */ +}; + +/*! @brief Enum _usdhc_present_status_flag. Present status flag mask. + * @anchor _usdhc_present_status_flag + */ +enum +{ + kUSDHC_CommandInhibitFlag = USDHC_PRES_STATE_CIHB_MASK, /*!< Command inhibit. */ + kUSDHC_DataInhibitFlag = USDHC_PRES_STATE_CDIHB_MASK, /*!< Data inhibit. */ + kUSDHC_DataLineActiveFlag = USDHC_PRES_STATE_DLA_MASK, /*!< Data line active. */ + kUSDHC_SdClockStableFlag = USDHC_PRES_STATE_SDSTB_MASK, /*!< SD bus clock stable. */ + kUSDHC_WriteTransferActiveFlag = USDHC_PRES_STATE_WTA_MASK, /*!< Write transfer active. */ + kUSDHC_ReadTransferActiveFlag = USDHC_PRES_STATE_RTA_MASK, /*!< Read transfer active. */ + kUSDHC_BufferWriteEnableFlag = USDHC_PRES_STATE_BWEN_MASK, /*!< Buffer write enable. */ + kUSDHC_BufferReadEnableFlag = USDHC_PRES_STATE_BREN_MASK, /*!< Buffer read enable. */ + +#if defined(FSL_FEATURE_USDHC_HAS_SDR50_MODE) && (!FSL_FEATURE_USDHC_HAS_SDR50_MODE) + kUSDHC_DelaySettingFinishedFlag = 0U, /*!< not support */ + kUSDHC_ReTuningRequestFlag = 0U, /*!< not support */ +#else + kUSDHC_ReTuningRequestFlag = USDHC_PRES_STATE_RTR_MASK, /*!< Re-tuning request flag, only used for SDR104 mode. */ + kUSDHC_DelaySettingFinishedFlag = USDHC_PRES_STATE_TSCD_MASK, /*!< Delay setting finished flag. */ +#endif + + kUSDHC_CardInsertedFlag = USDHC_PRES_STATE_CINST_MASK, /*!< Card inserted. */ + kUSDHC_CommandLineLevelFlag = USDHC_PRES_STATE_CLSL_MASK, /*!< Command line signal level. */ + + kUSDHC_Data0LineLevelFlag = 1U << USDHC_PRES_STATE_DLSL_SHIFT, /*!< Data0 line signal level. */ + kUSDHC_Data1LineLevelFlag = 1U << (USDHC_PRES_STATE_DLSL_SHIFT + 1U), /*!< Data1 line signal level. */ + kUSDHC_Data2LineLevelFlag = 1U << (USDHC_PRES_STATE_DLSL_SHIFT + 2U), /*!< Data2 line signal level. */ + kUSDHC_Data3LineLevelFlag = 1U << (USDHC_PRES_STATE_DLSL_SHIFT + 3U), /*!< Data3 line signal level. */ + kUSDHC_Data4LineLevelFlag = 1U << (USDHC_PRES_STATE_DLSL_SHIFT + 4U), /*!< Data4 line signal level. */ + kUSDHC_Data5LineLevelFlag = 1U << (USDHC_PRES_STATE_DLSL_SHIFT + 5U), /*!< Data5 line signal level. */ + kUSDHC_Data6LineLevelFlag = 1U << (USDHC_PRES_STATE_DLSL_SHIFT + 6U), /*!< Data6 line signal level. */ + kUSDHC_Data7LineLevelFlag = (int)(1U << (USDHC_PRES_STATE_DLSL_SHIFT + 7U)), /*!< Data7 line signal level. */ +}; + +/*! @brief Enum _usdhc_interrupt_status_flag. Interrupt status flag mask. + * @anchor _usdhc_interrupt_status_flag + */ +enum +{ + kUSDHC_CommandCompleteFlag = USDHC_INT_STATUS_CC_MASK, /*!< Command complete. */ + kUSDHC_DataCompleteFlag = USDHC_INT_STATUS_TC_MASK, /*!< Data complete. */ + kUSDHC_BlockGapEventFlag = USDHC_INT_STATUS_BGE_MASK, /*!< Block gap event. */ + kUSDHC_DmaCompleteFlag = USDHC_INT_STATUS_DINT_MASK, /*!< DMA interrupt. */ + kUSDHC_BufferWriteReadyFlag = USDHC_INT_STATUS_BWR_MASK, /*!< Buffer write ready. */ + kUSDHC_BufferReadReadyFlag = USDHC_INT_STATUS_BRR_MASK, /*!< Buffer read ready. */ + kUSDHC_CardInsertionFlag = USDHC_INT_STATUS_CINS_MASK, /*!< Card inserted. */ + kUSDHC_CardRemovalFlag = USDHC_INT_STATUS_CRM_MASK, /*!< Card removed. */ + kUSDHC_CardInterruptFlag = USDHC_INT_STATUS_CINT_MASK, /*!< Card interrupt. */ + +#if defined(FSL_FEATURE_USDHC_HAS_SDR50_MODE) && (!FSL_FEATURE_USDHC_HAS_SDR50_MODE) + kUSDHC_ReTuningEventFlag = 0U, /*!< Re-Tuning event, only for SD3.0 SDR104 mode. */ + kUSDHC_TuningPassFlag = 0U, /*!< SDR104 mode tuning pass flag. */ + kUSDHC_TuningErrorFlag = 0U, /*!< SDR104 tuning error flag. */ +#else + kUSDHC_ReTuningEventFlag = USDHC_INT_STATUS_RTE_MASK, /*!< Re-Tuning event, only for SD3.0 SDR104 mode. */ + kUSDHC_TuningPassFlag = USDHC_INT_STATUS_TP_MASK, /*!< SDR104 mode tuning pass flag. */ + kUSDHC_TuningErrorFlag = USDHC_INT_STATUS_TNE_MASK, /*!< SDR104 tuning error flag. */ +#endif + + kUSDHC_CommandTimeoutFlag = USDHC_INT_STATUS_CTOE_MASK, /*!< Command timeout error. */ + kUSDHC_CommandCrcErrorFlag = USDHC_INT_STATUS_CCE_MASK, /*!< Command CRC error. */ + kUSDHC_CommandEndBitErrorFlag = USDHC_INT_STATUS_CEBE_MASK, /*!< Command end bit error. */ + kUSDHC_CommandIndexErrorFlag = USDHC_INT_STATUS_CIE_MASK, /*!< Command index error. */ + kUSDHC_DataTimeoutFlag = USDHC_INT_STATUS_DTOE_MASK, /*!< Data timeout error. */ + kUSDHC_DataCrcErrorFlag = USDHC_INT_STATUS_DCE_MASK, /*!< Data CRC error. */ + kUSDHC_DataEndBitErrorFlag = USDHC_INT_STATUS_DEBE_MASK, /*!< Data end bit error. */ + kUSDHC_AutoCommand12ErrorFlag = USDHC_INT_STATUS_AC12E_MASK, /*!< Auto CMD12 error. */ + kUSDHC_DmaErrorFlag = USDHC_INT_STATUS_DMAE_MASK, /*!< DMA error. */ + + kUSDHC_CommandErrorFlag = (kUSDHC_CommandTimeoutFlag | kUSDHC_CommandCrcErrorFlag | kUSDHC_CommandEndBitErrorFlag | + kUSDHC_CommandIndexErrorFlag), /*!< Command error */ + kUSDHC_DataErrorFlag = (kUSDHC_DataTimeoutFlag | kUSDHC_DataCrcErrorFlag | kUSDHC_DataEndBitErrorFlag | + kUSDHC_AutoCommand12ErrorFlag), /*!< Data error */ + kUSDHC_ErrorFlag = (kUSDHC_CommandErrorFlag | kUSDHC_DataErrorFlag | kUSDHC_DmaErrorFlag), /*!< All error */ + + kUSDHC_DataFlag = (kUSDHC_DataCompleteFlag | kUSDHC_BufferWriteReadyFlag | kUSDHC_BufferReadReadyFlag | + kUSDHC_DataErrorFlag), /*!< Data interrupts */ + + kUSDHC_DataDMAFlag = (kUSDHC_DataCompleteFlag | kUSDHC_DataErrorFlag | kUSDHC_DmaErrorFlag), /*!< Data interrupts */ + + kUSDHC_CommandFlag = (kUSDHC_CommandErrorFlag | kUSDHC_CommandCompleteFlag), /*!< Command interrupts */ + kUSDHC_CardDetectFlag = (kUSDHC_CardInsertionFlag | kUSDHC_CardRemovalFlag), /*!< Card detection interrupts */ + kUSDHC_SDR104TuningFlag = (kUSDHC_TuningErrorFlag | kUSDHC_TuningPassFlag | kUSDHC_ReTuningEventFlag), + /*!< SDR104 tuning flag. */ + kUSDHC_AllInterruptFlags = + (kUSDHC_BlockGapEventFlag | kUSDHC_CardInterruptFlag | kUSDHC_CommandFlag | kUSDHC_DataFlag | kUSDHC_ErrorFlag | + kUSDHC_SDR104TuningFlag | kUSDHC_DmaCompleteFlag), /*!< All flags mask */ +}; + +/*! @brief Enum _usdhc_auto_command12_error_status_flag. Auto CMD12 error status flag mask. + * @anchor _usdhc_auto_command12_error_status_flag + */ +enum +{ + kUSDHC_AutoCommand12NotExecutedFlag = USDHC_AUTOCMD12_ERR_STATUS_AC12NE_MASK, /*!< Not executed error. */ + kUSDHC_AutoCommand12TimeoutFlag = USDHC_AUTOCMD12_ERR_STATUS_AC12TOE_MASK, /*!< Timeout error. */ + kUSDHC_AutoCommand12EndBitErrorFlag = USDHC_AUTOCMD12_ERR_STATUS_AC12EBE_MASK, /*!< End bit error. */ + kUSDHC_AutoCommand12CrcErrorFlag = USDHC_AUTOCMD12_ERR_STATUS_AC12CE_MASK, /*!< CRC error. */ + kUSDHC_AutoCommand12IndexErrorFlag = USDHC_AUTOCMD12_ERR_STATUS_AC12IE_MASK, /*!< Index error. */ + kUSDHC_AutoCommand12NotIssuedFlag = USDHC_AUTOCMD12_ERR_STATUS_CNIBAC12E_MASK, /*!< Not issued error. */ +}; + +/*! @brief Enum _usdhc_standard_tuning. Standard tuning flag. */ +enum +{ +#if defined(FSL_FEATURE_USDHC_HAS_SDR50_MODE) && (!FSL_FEATURE_USDHC_HAS_SDR50_MODE) + kUSDHC_ExecuteTuning = 0U, /*!< not support */ + kUSDHC_TuningSampleClockSel = 0U, /*!< not support */ +#else + kUSDHC_ExecuteTuning = USDHC_AUTOCMD12_ERR_STATUS_EXECUTE_TUNING_MASK, /*!< Used to start tuning procedure. */ + kUSDHC_TuningSampleClockSel = + USDHC_AUTOCMD12_ERR_STATUS_SMP_CLK_SEL_MASK, /*!< When <b>std_tuning_en</b> bit is set, this + bit is used to select sampleing clock. */ +#endif +}; + +/*! @brief Enum _usdhc_adma_error_status_flag. ADMA error status flag mask. + * @anchor _usdhc_adma_error_status_flag + */ +enum +{ + kUSDHC_AdmaLenghMismatchFlag = USDHC_ADMA_ERR_STATUS_ADMALME_MASK, /*!< Length mismatch error. */ + kUSDHC_AdmaDescriptorErrorFlag = USDHC_ADMA_ERR_STATUS_ADMADCE_MASK, /*!< Descriptor error. */ +}; + +/*! + * @brief Enum _usdhc_adma_error_state. ADMA error state. + * + * This state is the detail state when ADMA error has occurred. + */ +enum +{ + kUSDHC_AdmaErrorStateStopDma = 0x00U, + /*!< Stop DMA, previous location set in the ADMA system address is errored address. */ + kUSDHC_AdmaErrorStateFetchDescriptor = 0x01U, + /*!< Fetch descriptor, current location set in the ADMA system address is errored address. */ + kUSDHC_AdmaErrorStateChangeAddress = 0x02U, /*!< Change address, no DMA error has occurred. */ + kUSDHC_AdmaErrorStateTransferData = 0x03U, + /*!< Transfer data, previous location set in the ADMA system address is errored address. */ + kUSDHC_AdmaErrorStateInvalidLength = 0x04U, /*!< Invalid length in ADMA descriptor. */ + kUSDHC_AdmaErrorStateInvalidDescriptor = 0x08U, /*!< Invalid descriptor fetched by ADMA. */ + + kUSDHC_AdmaErrorState = kUSDHC_AdmaErrorStateInvalidLength | kUSDHC_AdmaErrorStateInvalidDescriptor | + kUSDHC_AdmaErrorStateFetchDescriptor, /*!< ADMA error state */ +}; + +/*! @brief Enum _usdhc_force_event. Force event bit position. + * @anchor _usdhc_force_event + */ +enum +{ + kUSDHC_ForceEventAutoCommand12NotExecuted = + USDHC_FORCE_EVENT_FEVTAC12NE_MASK, /*!< Auto CMD12 not executed error. */ + kUSDHC_ForceEventAutoCommand12Timeout = USDHC_FORCE_EVENT_FEVTAC12TOE_MASK, /*!< Auto CMD12 timeout error. */ + kUSDHC_ForceEventAutoCommand12CrcError = USDHC_FORCE_EVENT_FEVTAC12CE_MASK, /*!< Auto CMD12 CRC error. */ + kUSDHC_ForceEventEndBitError = USDHC_FORCE_EVENT_FEVTAC12EBE_MASK, /*!< Auto CMD12 end bit error. */ + kUSDHC_ForceEventAutoCommand12IndexError = USDHC_FORCE_EVENT_FEVTAC12IE_MASK, /*!< Auto CMD12 index error. */ + kUSDHC_ForceEventAutoCommand12NotIssued = USDHC_FORCE_EVENT_FEVTCNIBAC12E_MASK, /*!< Auto CMD12 not issued error. */ + kUSDHC_ForceEventCommandTimeout = USDHC_FORCE_EVENT_FEVTCTOE_MASK, /*!< Command timeout error. */ + kUSDHC_ForceEventCommandCrcError = USDHC_FORCE_EVENT_FEVTCCE_MASK, /*!< Command CRC error. */ + kUSDHC_ForceEventCommandEndBitError = USDHC_FORCE_EVENT_FEVTCEBE_MASK, /*!< Command end bit error. */ + kUSDHC_ForceEventCommandIndexError = USDHC_FORCE_EVENT_FEVTCIE_MASK, /*!< Command index error. */ + kUSDHC_ForceEventDataTimeout = USDHC_FORCE_EVENT_FEVTDTOE_MASK, /*!< Data timeout error. */ + kUSDHC_ForceEventDataCrcError = USDHC_FORCE_EVENT_FEVTDCE_MASK, /*!< Data CRC error. */ + kUSDHC_ForceEventDataEndBitError = USDHC_FORCE_EVENT_FEVTDEBE_MASK, /*!< Data end bit error. */ + kUSDHC_ForceEventAutoCommand12Error = USDHC_FORCE_EVENT_FEVTAC12E_MASK, /*!< Auto CMD12 error. */ + kUSDHC_ForceEventCardInt = (int)USDHC_FORCE_EVENT_FEVTCINT_MASK, /*!< Card interrupt. */ + kUSDHC_ForceEventDmaError = USDHC_FORCE_EVENT_FEVTDMAE_MASK, /*!< Dma error. */ +#if defined(FSL_FEATURE_USDHC_HAS_SDR50_MODE) && (!FSL_FEATURE_USDHC_HAS_SDR50_MODE) + kUSDHC_ForceEventTuningError = 0U, /*!< not support */ +#else + kUSDHC_ForceEventTuningError = USDHC_FORCE_EVENT_FEVTTNE_MASK, /*!< Tuning error. */ +#endif + + kUSDHC_ForceEventsAll = + (int)(USDHC_FORCE_EVENT_FEVTAC12NE_MASK | USDHC_FORCE_EVENT_FEVTAC12TOE_MASK | + USDHC_FORCE_EVENT_FEVTAC12CE_MASK | USDHC_FORCE_EVENT_FEVTAC12EBE_MASK | + USDHC_FORCE_EVENT_FEVTAC12IE_MASK | USDHC_FORCE_EVENT_FEVTCNIBAC12E_MASK | + USDHC_FORCE_EVENT_FEVTCTOE_MASK | USDHC_FORCE_EVENT_FEVTCCE_MASK | USDHC_FORCE_EVENT_FEVTCEBE_MASK | + USDHC_FORCE_EVENT_FEVTCIE_MASK | USDHC_FORCE_EVENT_FEVTDTOE_MASK | USDHC_FORCE_EVENT_FEVTDCE_MASK | + USDHC_FORCE_EVENT_FEVTDEBE_MASK | USDHC_FORCE_EVENT_FEVTAC12E_MASK | USDHC_FORCE_EVENT_FEVTCINT_MASK | + USDHC_FORCE_EVENT_FEVTDMAE_MASK | kUSDHC_ForceEventTuningError), /*!< All force event flags mask. */ +}; + +/*! @brief Data transfer direction. */ +typedef enum _usdhc_transfer_direction +{ + kUSDHC_TransferDirectionReceive = 1U, /*!< USDHC transfer direction receive. */ + kUSDHC_TransferDirectionSend = 0U, /*!< USDHC transfer direction send. */ +} usdhc_transfer_direction_t; + +/*! @brief Data transfer width. */ +typedef enum _usdhc_data_bus_width +{ + kUSDHC_DataBusWidth1Bit = 0U, /*!< 1-bit mode */ + kUSDHC_DataBusWidth4Bit = 1U, /*!< 4-bit mode */ + kUSDHC_DataBusWidth8Bit = 2U, /*!< 8-bit mode */ +} usdhc_data_bus_width_t; + +/*! @brief Endian mode */ +typedef enum _usdhc_endian_mode +{ + kUSDHC_EndianModeBig = 0U, /*!< Big endian mode. */ + kUSDHC_EndianModeHalfWordBig = 1U, /*!< Half word big endian mode. */ + kUSDHC_EndianModeLittle = 2U, /*!< Little endian mode. */ +} usdhc_endian_mode_t; + +/*! @brief DMA mode */ +typedef enum _usdhc_dma_mode +{ + kUSDHC_DmaModeSimple = 0U, /*!< External DMA. */ + kUSDHC_DmaModeAdma1 = 1U, /*!< ADMA1 is selected. */ + kUSDHC_DmaModeAdma2 = 2U, /*!< ADMA2 is selected. */ + kUSDHC_ExternalDMA = 3U, /*!< External DMA mode selected. */ +} usdhc_dma_mode_t; + +/*! @brief Enum _usdhc_sdio_control_flag. SDIO control flag mask. + * @anchor _usdhc_sdio_control_flag + */ +enum +{ + kUSDHC_StopAtBlockGapFlag = USDHC_PROT_CTRL_SABGREQ_MASK, /*!< Stop at block gap. */ + kUSDHC_ReadWaitControlFlag = USDHC_PROT_CTRL_RWCTL_MASK, /*!< Read wait control. */ + kUSDHC_InterruptAtBlockGapFlag = USDHC_PROT_CTRL_IABG_MASK, /*!< Interrupt at block gap. */ + kUSDHC_ReadDoneNo8CLK = USDHC_PROT_CTRL_RD_DONE_NO_8CLK_MASK, /*!< Read done without 8 clk for block gap. */ + kUSDHC_ExactBlockNumberReadFlag = USDHC_PROT_CTRL_NON_EXACT_BLK_RD_MASK, /*!< Exact block number read. */ +}; + +/*! @brief MMC card boot mode */ +typedef enum _usdhc_boot_mode +{ + kUSDHC_BootModeNormal = 0U, /*!< Normal boot */ + kUSDHC_BootModeAlternative = 1U, /*!< Alternative boot */ +} usdhc_boot_mode_t; + +/*! @brief The command type */ +typedef enum _usdhc_card_command_type +{ + kCARD_CommandTypeNormal = 0U, /*!< Normal command */ + kCARD_CommandTypeSuspend = 1U, /*!< Suspend command */ + kCARD_CommandTypeResume = 2U, /*!< Resume command */ + kCARD_CommandTypeAbort = 3U, /*!< Abort command */ + kCARD_CommandTypeEmpty = 4U, /*!< Empty command */ +} usdhc_card_command_type_t; + +/*! + * @brief The command response type. + * + * Defines the command response type from card to host controller. + */ +typedef enum _usdhc_card_response_type +{ + kCARD_ResponseTypeNone = 0U, /*!< Response type: none */ + kCARD_ResponseTypeR1 = 1U, /*!< Response type: R1 */ + kCARD_ResponseTypeR1b = 2U, /*!< Response type: R1b */ + kCARD_ResponseTypeR2 = 3U, /*!< Response type: R2 */ + kCARD_ResponseTypeR3 = 4U, /*!< Response type: R3 */ + kCARD_ResponseTypeR4 = 5U, /*!< Response type: R4 */ + kCARD_ResponseTypeR5 = 6U, /*!< Response type: R5 */ + kCARD_ResponseTypeR5b = 7U, /*!< Response type: R5b */ + kCARD_ResponseTypeR6 = 8U, /*!< Response type: R6 */ + kCARD_ResponseTypeR7 = 9U, /*!< Response type: R7 */ +} usdhc_card_response_type_t; + +/*! @brief The alignment size for ADDRESS filed in ADMA1's descriptor. */ +#define USDHC_ADMA1_ADDRESS_ALIGN (4096U) +/*! @brief The alignment size for LENGTH field in ADMA1's descriptor. */ +#define USDHC_ADMA1_LENGTH_ALIGN (4096U) +/*! @brief The alignment size for ADDRESS field in ADMA2's descriptor. */ +#define USDHC_ADMA2_ADDRESS_ALIGN (4U) +/*! @brief The alignment size for LENGTH filed in ADMA2's descriptor. */ +#define USDHC_ADMA2_LENGTH_ALIGN (4U) + +/* ADMA1 descriptor table: + * |------------------------|---------|--------------------------| + * | Address/page field |Reserved | Attribute | + * |------------------------|---------|--------------------------| + * |31 12|11 6|05 |04 |03|02 |01 |00 | + * |------------------------|---------|----|----|--|---|---|-----| + * | address or data length | 000000 |Act2|Act1| 0|Int|End|Valid| + * |------------------------|---------|----|----|--|---|---|-----| + * + * ADMA2 action table: + * |------|------|-----------------|-------|-------------| + * | Act2 | Act1 | Comment | 31-28 | 27 - 12 | + * |------|------|-----------------|---------------------| + * | 0 | 0 | No op | Don't care | + * |------|------|-----------------|-------|-------------| + * | 0 | 1 | Set data length | 0000 | Data Length | + * |------|------|-----------------|-------|-------------| + * | 1 | 0 | Transfer data | Data address | + * |------|------|-----------------|---------------------| + * | 1 | 1 | Link descriptor | Descriptor address | + * |------|------|-----------------|---------------------| + */ +/****************************tables below are created only for Doxygen*********************************/ +/*! @brief The bit shift for ADDRESS filed in ADMA1's descriptor. + * <table> + * <caption>ADMA1 descriptor table</caption> + * <tr><th>Address/page field <th>Reserved <th colspan="6">Attribute + * <tr><td>31 12 <td>11 6 <td>05 <td>04 <td>03 <td>02 <td>01 <td>00 + * <tr><td>address or data length <td>000000 <td>Act2 <td>Act1 <td>0 <td>Int <td>End <td>Valid + * </table> + * + * <table> + * <caption>ADMA2 action</caption> + * <tr><th>Act2 <th>Act1 <th>Comment <th>31-28 <th>27-12 + * <tr><td>0 <td>0 <td>No op <td colspan="2">Don't care + * <tr><td>0 <td>1 <td>Set data length <td>0000 <td> Data Length + * <tr><td>1 <td>0 <td>Transfer data <td colspan="2">Data address + * <tr><td>1 <td>1 <td>Link descriptor <td colspan="2">Descriptor address + * </table> + */ +#define USDHC_ADMA1_DESCRIPTOR_ADDRESS_SHIFT (12U) +/*! @brief The bit mask for ADDRESS field in ADMA1's descriptor. */ +#define USDHC_ADMA1_DESCRIPTOR_ADDRESS_MASK (0xFFFFFU) +/*! @brief The bit shift for LENGTH filed in ADMA1's descriptor. */ +#define USDHC_ADMA1_DESCRIPTOR_LENGTH_SHIFT (12U) +/*! @brief The mask for LENGTH field in ADMA1's descriptor. */ +#define USDHC_ADMA1_DESCRIPTOR_LENGTH_MASK (0xFFFFU) +/*! @brief The maximum value of LENGTH filed in ADMA1's descriptor. + * Since the max transfer size ADMA1 support is 65535 which is indivisible by + * 4096, so to make sure a large data load transfer (>64KB) continuously (require the data + * address be always align with 4096), software will set the maximum data length + * for ADMA1 to (64 - 4)KB. + */ +#define USDHC_ADMA1_DESCRIPTOR_MAX_LENGTH_PER_ENTRY (USDHC_ADMA1_DESCRIPTOR_LENGTH_MASK + 1U - 4096U) + +/*! @brief Enum _usdhc_adma1_descriptor_flag. The mask for the control/status field in ADMA1 descriptor. */ +enum +{ + kUSDHC_Adma1DescriptorValidFlag = (1U << 0U), /*!< Valid flag. */ + kUSDHC_Adma1DescriptorEndFlag = (1U << 1U), /*!< End flag. */ + kUSDHC_Adma1DescriptorInterrupFlag = (1U << 2U), /*!< Interrupt flag. */ + kUSDHC_Adma1DescriptorActivity1Flag = (1U << 4U), /*!< Activity 1 flag. */ + kUSDHC_Adma1DescriptorActivity2Flag = (1U << 5U), /*!< Activity 2 flag. */ + kUSDHC_Adma1DescriptorTypeNop = (kUSDHC_Adma1DescriptorValidFlag), /*!< No operation. */ + kUSDHC_Adma1DescriptorTypeTransfer = (kUSDHC_Adma1DescriptorActivity2Flag | kUSDHC_Adma1DescriptorValidFlag), + /*!< Transfer data. */ + kUSDHC_Adma1DescriptorTypeLink = (kUSDHC_Adma1DescriptorActivity1Flag | kUSDHC_Adma1DescriptorActivity2Flag | + kUSDHC_Adma1DescriptorValidFlag), /*!< Link descriptor. */ + kUSDHC_Adma1DescriptorTypeSetLength = (kUSDHC_Adma1DescriptorActivity1Flag | kUSDHC_Adma1DescriptorValidFlag), + /*!< Set data length. */ +}; + +/* ADMA2 descriptor table: + * |----------------|---------------|-------------|--------------------------| + * | Address field | Length | Reserved | Attribute | + * |----------------|---------------|-------------|--------------------------| + * |63 32|31 16|15 06|05 |04 |03|02 |01 |00 | + * |----------------|---------------|-------------|----|----|--|---|---|-----| + * | 32-bit address | 16-bit length | 0000000000 |Act2|Act1| 0|Int|End|Valid| + * |----------------|---------------|-------------|----|----|--|---|---|-----| + * + * ADMA2 action table: + * | Act2 | Act1 | Comment | Operation | + * |------|------|-----------------|-------------------------------------------------------------------| + * | 0 | 0 | No op | Don't care | + * |------|------|-----------------|-------------------------------------------------------------------| + * | 0 | 1 | Reserved | Read this line and go to next one | + * |------|------|-----------------|-------------------------------------------------------------------| + * | 1 | 0 | Transfer data | Transfer data with address and length set in this descriptor line | + * |------|------|-----------------|-------------------------------------------------------------------| + * | 1 | 1 | Link descriptor | Link to another descriptor | + * |------|------|-----------------|-------------------------------------------------------------------| + */ +/**********************************tables below are created only for Doxygen***********************************/ +/*! @brief The bit shift for LENGTH field in ADMA2's descriptor. + * + * <table> + * <caption>ADMA2 descriptor table</caption> + * <tr><th>Address field <th>Length <th>Reserved <th colspan="6">Attribute + * <tr><td>63 32 <td>31 16 <td>15 06 <td>05 <td>04 <td>03 <td>02 <td>01 <td>00 + * <tr><td>32-bit address <td>16-bit length <td>0000000000 <td>Act2 <td>Act1 <td>0 <td>Int <td>End <td>Valid + *</table> + * + * <table> + * <caption>ADMA2 action</caption> + * <tr><th>Act2 <th>Act1 <th>Comment <th>Operation + * <tr><td> 0 <td>0 <td>No op <td>Don't care + * <tr><td> 0 <td>1 <td> Reserved <td> Read this line and go to next one + * <tr><td> 1 <td>0 <td>Transfer data <td>Transfer data with address and length set in this descriptor line + * <tr><td> 1 <td>1 <td>Link descriptor <td>Link to another descriptor + * </table> + */ +#define USDHC_ADMA2_DESCRIPTOR_LENGTH_SHIFT (16U) +/*! @brief The bit mask for LENGTH field in ADMA2's descriptor. */ +#define USDHC_ADMA2_DESCRIPTOR_LENGTH_MASK (0xFFFFU) +/*! @brief The maximum value of LENGTH field in ADMA2's descriptor. */ +#define USDHC_ADMA2_DESCRIPTOR_MAX_LENGTH_PER_ENTRY (USDHC_ADMA2_DESCRIPTOR_LENGTH_MASK - 3U) + +/*! @brief Enum _usdhc_adma2_descriptor_flag. ADMA1 descriptor control and status mask. */ +enum +{ + kUSDHC_Adma2DescriptorValidFlag = (1U << 0U), /*!< Valid flag. */ + kUSDHC_Adma2DescriptorEndFlag = (1U << 1U), /*!< End flag. */ + kUSDHC_Adma2DescriptorInterruptFlag = (1U << 2U), /*!< Interrupt flag. */ + kUSDHC_Adma2DescriptorActivity1Flag = (1U << 4U), /*!< Activity 1 mask. */ + kUSDHC_Adma2DescriptorActivity2Flag = (1U << 5U), /*!< Activity 2 mask. */ + + kUSDHC_Adma2DescriptorTypeNop = (kUSDHC_Adma2DescriptorValidFlag), /*!< No operation. */ + kUSDHC_Adma2DescriptorTypeReserved = (kUSDHC_Adma2DescriptorActivity1Flag | kUSDHC_Adma2DescriptorValidFlag), + /*!< Reserved. */ + kUSDHC_Adma2DescriptorTypeTransfer = (kUSDHC_Adma2DescriptorActivity2Flag | kUSDHC_Adma2DescriptorValidFlag), + /*!< Transfer type. */ + kUSDHC_Adma2DescriptorTypeLink = (kUSDHC_Adma2DescriptorActivity1Flag | kUSDHC_Adma2DescriptorActivity2Flag | + kUSDHC_Adma2DescriptorValidFlag), /*!< Link type. */ +}; + +/*! @brief Enum _usdhc_adma_flag. ADMA descriptor configuration flag. + * @anchor _usdhc_adma_flag + */ +enum +{ + kUSDHC_AdmaDescriptorSingleFlag = 0U, + /*!< Try to finish the transfer in a single ADMA descriptor. If transfer size is bigger than one + ADMA descriptor's ability, new another descriptor for data transfer. */ + kUSDHC_AdmaDescriptorMultipleFlag = + 1U, /*!< Create multiple ADMA descriptors within the ADMA table, this is used for + mmc boot mode specifically, which need + to modify the ADMA descriptor on the fly, so the flag should be used + combining with stop at block gap feature. */ +}; + +/*! @brief DMA transfer burst len config. */ +typedef enum _usdhc_burst_len +{ + kUSDHC_EnBurstLenForINCR = 0x01U, /*!< Enable burst len for INCR. */ + kUSDHC_EnBurstLenForINCR4816 = 0x02U, /*!< Enable burst len for INCR4/INCR8/INCR16. */ + kUSDHC_EnBurstLenForINCR4816WRAP = 0x04U, /*!< Enable burst len for INCR4/8/16 WRAP. */ +} usdhc_burst_len_t; + +/*! @brief Enum _usdhc_transfer_data_type. Tansfer data type definition. */ +enum +{ + kUSDHC_TransferDataNormal = 0U, /*!< Transfer normal read/write data. */ + kUSDHC_TransferDataTuning = 1U, /*!< Transfer tuning data. */ + kUSDHC_TransferDataBoot = 2U, /*!< Transfer boot data. */ + kUSDHC_TransferDataBootcontinous = 3U, /*!< Transfer boot data continuously. */ +}; + +/*! @brief Defines the ADMA1 descriptor structure. */ +typedef uint32_t usdhc_adma1_descriptor_t; + +/*! @brief Defines the ADMA2 descriptor structure. */ +typedef struct _usdhc_adma2_descriptor +{ + uint32_t attribute; /*!< The control and status field. */ + const uint32_t *address; /*!< The address field. */ +} usdhc_adma2_descriptor_t; + +/*! + * @brief USDHC capability information. + * + * Defines a structure to save the capability information of USDHC. + */ +typedef struct _usdhc_capability +{ + uint32_t sdVersion; /*!< Support SD card/sdio version. */ + uint32_t mmcVersion; /*!< Support EMMC card version. */ + uint32_t maxBlockLength; /*!< Maximum block length united as byte. */ + uint32_t maxBlockCount; /*!< Maximum block count can be set one time. */ + uint32_t flags; /*!< Capability flags to indicate the support information(@ref _usdhc_capability_flag). */ +} usdhc_capability_t; + +/*! @brief Data structure to configure the MMC boot feature. */ +typedef struct _usdhc_boot_config +{ + uint32_t ackTimeoutCount; /*!< Timeout value for the boot ACK. The available range is 0 ~ 15. */ + usdhc_boot_mode_t bootMode; /*!< Boot mode selection. */ + uint32_t blockCount; /*!< Stop at block gap value of automatic mode. Available range is 0 ~ 65535. */ + size_t blockSize; /*!< Block size. */ + bool enableBootAck; /*!< Enable or disable boot ACK. */ + bool enableAutoStopAtBlockGap; /*!< Enable or disable auto stop at block gap function in boot period. */ +} usdhc_boot_config_t; + +/*! @brief Data structure to initialize the USDHC. */ +typedef struct _usdhc_config +{ + uint32_t dataTimeout; /*!< Data timeout value. */ + usdhc_endian_mode_t endianMode; /*!< Endian mode. */ + uint8_t readWatermarkLevel; /*!< Watermark level for DMA read operation. Available range is 1 ~ 128. */ + uint8_t writeWatermarkLevel; /*!< Watermark level for DMA write operation. Available range is 1 ~ 128. */ +#if !(defined(FSL_FEATURE_USDHC_HAS_NO_RW_BURST_LEN) && FSL_FEATURE_USDHC_HAS_NO_RW_BURST_LEN) + uint8_t readBurstLen; /*!< Read burst len. */ + uint8_t writeBurstLen; /*!< Write burst len. */ +#endif +} usdhc_config_t; + +/*! + * @brief Card command descriptor. + * + * Defines card command-related attribute. + */ +typedef struct _usdhc_command +{ + uint32_t index; /*!< Command index. */ + uint32_t argument; /*!< Command argument. */ + usdhc_card_command_type_t type; /*!< Command type. */ + usdhc_card_response_type_t responseType; /*!< Command response type. */ + uint32_t response[4U]; /*!< Response for this command. */ + uint32_t responseErrorFlags; /*!< Response error flag, which need to check + the command reponse. */ + uint32_t flags; /*!< Cmd flags. */ +} usdhc_command_t; + +/*! @brief ADMA configuration. */ +typedef struct _usdhc_adma_config +{ + usdhc_dma_mode_t dmaMode; /*!< DMA mode. */ +#if !(defined(FSL_FEATURE_USDHC_HAS_NO_RW_BURST_LEN) && FSL_FEATURE_USDHC_HAS_NO_RW_BURST_LEN) + usdhc_burst_len_t burstLen; /*!< Burst len config. */ +#endif + uint32_t *admaTable; /*!< ADMA table address, can't be null if transfer way is ADMA1/ADMA2. */ + uint32_t admaTableWords; /*!< ADMA table length united as words, can't be 0 if transfer way is ADMA1/ADMA2. */ +} usdhc_adma_config_t; + +/*! + * @brief Card scatter gather data list. + * + * Allow application register uncontinuous data buffer for data transfer. + */ +typedef struct _usdhc_scatter_gather_data_list +{ + uint32_t *dataAddr; + uint32_t dataSize; + struct _usdhc_scatter_gather_data_list *dataList; +} usdhc_scatter_gather_data_list_t; + +/*! + * @brief Card scatter gather data descriptor. + * + * Defines a structure to contain data-related attribute. The 'enableIgnoreError' is used when upper card + * driver wants to ignore the error event to read/write all the data and not to stop read/write immediately when an + * error event happens. For example, bus testing procedure for MMC card. + */ +typedef struct _usdhc_scatter_gather_data +{ + bool enableAutoCommand12; /*!< Enable auto CMD12. */ + bool enableAutoCommand23; /*!< Enable auto CMD23. */ + bool enableIgnoreError; /*!< Enable to ignore error event to read/write all the data. */ + + usdhc_transfer_direction_t dataDirection; /*!< data direction */ + uint8_t dataType; /*!< this is used to distinguish the normal/tuning/boot data. */ + size_t blockSize; /*!< Block size. */ + + usdhc_scatter_gather_data_list_t sgData; /*!< scatter gather data */ +} usdhc_scatter_gather_data_t; + +/*! @brief usdhc scatter gather transfer. */ +typedef struct _usdhc_scatter_gather_transfer +{ + usdhc_scatter_gather_data_t *data; /*!< Data to transfer. */ + usdhc_command_t *command; /*!< Command to send. */ +} usdhc_scatter_gather_transfer_t; + +/*! + * @brief Card data descriptor. + * + * Defines a structure to contain data-related attribute. The 'enableIgnoreError' is used when upper card + * driver wants to ignore the error event to read/write all the data and not to stop read/write immediately when an + * error event happens. For example, bus testing procedure for MMC card. + */ +typedef struct _usdhc_data +{ + bool enableAutoCommand12; /*!< Enable auto CMD12. */ + bool enableAutoCommand23; /*!< Enable auto CMD23. */ + bool enableIgnoreError; /*!< Enable to ignore error event to read/write all the data. */ + uint8_t dataType; /*!< this is used to distinguish the normal/tuning/boot data. */ + size_t blockSize; /*!< Block size. */ + uint32_t blockCount; /*!< Block count. */ + uint32_t *rxData; /*!< Buffer to save data read. */ + const uint32_t *txData; /*!< Data buffer to write. */ +} usdhc_data_t; + +/*! @brief Transfer state. */ +typedef struct _usdhc_transfer +{ + usdhc_data_t *data; /*!< Data to transfer. */ + usdhc_command_t *command; /*!< Command to send. */ +} usdhc_transfer_t; + +/*! @brief USDHC handle typedef. */ +typedef struct _usdhc_handle usdhc_handle_t; + +/*! @brief USDHC callback functions. */ +typedef struct _usdhc_transfer_callback +{ + void (*CardInserted)(USDHC_Type *base, + void *userData); /*!< Card inserted occurs when DAT3/CD pin is for card detect */ + void (*CardRemoved)(USDHC_Type *base, void *userData); /*!< Card removed occurs */ + void (*SdioInterrupt)(USDHC_Type *base, void *userData); /*!< SDIO card interrupt occurs */ + void (*BlockGap)(USDHC_Type *base, void *userData); /*!< stopped at block gap event */ + void (*TransferComplete)(USDHC_Type *base, + usdhc_handle_t *handle, + status_t status, + void *userData); /*!< Transfer complete callback. */ + void (*ReTuning)(USDHC_Type *base, void *userData); /*!< Handle the re-tuning. */ +} usdhc_transfer_callback_t; + +/*! + * @brief USDHC handle. + * + * Defines the structure to save the USDHC state information and callback function. + * + * @note All the fields except interruptFlags and transferredWords must be allocated by the user. + */ +struct _usdhc_handle +{ +#if (defined FSL_USDHC_ENABLE_SCATTER_GATHER_TRANSFER) && FSL_USDHC_ENABLE_SCATTER_GATHER_TRANSFER + usdhc_scatter_gather_data_t *volatile data; /*!< scatter gather data pointer */ +#else + usdhc_data_t *volatile data; /*!< Transfer parameter. Data to transfer. */ +#endif + usdhc_command_t *volatile command; /*!< Transfer parameter. Command to send. */ + + volatile uint32_t transferredWords; /*!< Transfer status. Words transferred by DATAPORT way. */ + + usdhc_transfer_callback_t callback; /*!< Callback function. */ + void *userData; /*!< Parameter for transfer complete callback. */ +}; + +/*! @brief USDHC transfer function. */ +typedef status_t (*usdhc_transfer_function_t)(USDHC_Type *base, usdhc_transfer_t *content); + +/*! @brief USDHC host descriptor. */ +typedef struct _usdhc_host +{ + USDHC_Type *base; /*!< USDHC peripheral base address. */ + uint32_t sourceClock_Hz; /*!< USDHC source clock frequency united in Hz. */ + usdhc_config_t config; /*!< USDHC configuration. */ + usdhc_capability_t capability; /*!< USDHC capability information. */ + usdhc_transfer_function_t transfer; /*!< USDHC transfer function. */ +} usdhc_host_t; + +/************************************************************************************************* + * API + ************************************************************************************************/ +#if defined(__cplusplus) +extern "C" { +#endif + +/*! + * @name Initialization and deinitialization + * @{ + */ + +/*! + * @brief USDHC module initialization function. + * + * Configures the USDHC according to the user configuration. + * + * Example: + @code + usdhc_config_t config; + config.cardDetectDat3 = false; + config.endianMode = kUSDHC_EndianModeLittle; + config.dmaMode = kUSDHC_DmaModeAdma2; + config.readWatermarkLevel = 128U; + config.writeWatermarkLevel = 128U; + USDHC_Init(USDHC, &config); + @endcode + * + * @param base USDHC peripheral base address. + * @param config USDHC configuration information. + * @retval #kStatus_Success Operate successfully. + */ +void USDHC_Init(USDHC_Type *base, const usdhc_config_t *config); + +/*! + * @brief Deinitializes the USDHC. + * + * @param base USDHC peripheral base address. + */ +void USDHC_Deinit(USDHC_Type *base); + +/*! + * @brief Resets the USDHC. + * + * @param base USDHC peripheral base address. + * @param mask The reset type mask(@ref _usdhc_reset). + * @param timeout Timeout for reset. + * @retval true Reset successfully. + * @retval false Reset failed. + */ +bool USDHC_Reset(USDHC_Type *base, uint32_t mask, uint32_t timeout); + +/* @} */ + +/*! + * @name DMA Control + * @{ + */ + +/*! + * @brief Sets the DMA descriptor table configuration. + * A high level DMA descriptor configuration function. + * @param base USDHC peripheral base address. + * @param dmaConfig ADMA configuration + * @param dataConfig Data descriptor + * @param flags ADAM descriptor flag, used to indicate to create multiple or single descriptor, please + * refer to enum @ref _usdhc_adma_flag. + * @retval #kStatus_OutOfRange ADMA descriptor table length isn't enough to describe data. + * @retval #kStatus_Success Operate successfully. + */ +status_t USDHC_SetAdmaTableConfig(USDHC_Type *base, + usdhc_adma_config_t *dmaConfig, + usdhc_data_t *dataConfig, + uint32_t flags); + +/*! + * @brief Internal DMA configuration. + * This function is used to config the USDHC DMA related registers. + * @param base USDHC peripheral base address. + * @param dmaConfig ADMA configuration. + * @param dataAddr Transfer data address, a simple DMA parameter, if ADMA is used, leave it to NULL. + * @param enAutoCmd23 Flag to indicate Auto CMD23 is enable or not, a simple DMA parameter, if ADMA is used, leave it + * to false. + * @retval #kStatus_OutOfRange ADMA descriptor table length isn't enough to describe data. + * @retval #kStatus_Success Operate successfully. + */ +status_t USDHC_SetInternalDmaConfig(USDHC_Type *base, + usdhc_adma_config_t *dmaConfig, + const uint32_t *dataAddr, + bool enAutoCmd23); + +/*! + * @brief Sets the ADMA2 descriptor table configuration. + * + * @param admaTable ADMA table address. + * @param admaTableWords ADMA table length. + * @param dataBufferAddr Data buffer address. + * @param dataBytes Data Data length. + * @param flags ADAM descriptor flag, used to indicate to create multiple or single descriptor, please + * refer to enum @ref _usdhc_adma_flag. + * @retval #kStatus_OutOfRange ADMA descriptor table length isn't enough to describe data. + * @retval #kStatus_Success Operate successfully. + */ +status_t USDHC_SetADMA2Descriptor( + uint32_t *admaTable, uint32_t admaTableWords, const uint32_t *dataBufferAddr, uint32_t dataBytes, uint32_t flags); + +/*! + * @brief Sets the ADMA1 descriptor table configuration. + * + * @param admaTable ADMA table address. + * @param admaTableWords ADMA table length. + * @param dataBufferAddr Data buffer address. + * @param dataBytes Data length. + * @param flags ADAM descriptor flag, used to indicate to create multiple or single descriptor, please + * refer to enum @ref _usdhc_adma_flag. + * @retval #kStatus_OutOfRange ADMA descriptor table length isn't enough to describe data. + * @retval #kStatus_Success Operate successfully. + */ +status_t USDHC_SetADMA1Descriptor( + uint32_t *admaTable, uint32_t admaTableWords, const uint32_t *dataBufferAddr, uint32_t dataBytes, uint32_t flags); + +/*! + * @brief Enables internal DMA. + * + * @param base USDHC peripheral base address. + * @param enable enable or disable flag + */ +static inline void USDHC_EnableInternalDMA(USDHC_Type *base, bool enable) +{ + if (enable) + { + base->MIX_CTRL |= USDHC_MIX_CTRL_DMAEN_MASK; + } + else + { + base->MIX_CTRL &= ~USDHC_MIX_CTRL_DMAEN_MASK; + base->PROT_CTRL &= ~USDHC_PROT_CTRL_DMASEL_MASK; + } +} + +/* @} */ + +/*! + * @name Interrupts + * @{ + */ + +/*! + * @brief Enables the interrupt status. + * + * @param base USDHC peripheral base address. + * @param mask Interrupt status flags mask(@ref _usdhc_interrupt_status_flag). + */ +static inline void USDHC_EnableInterruptStatus(USDHC_Type *base, uint32_t mask) +{ + base->INT_STATUS_EN |= mask; +} + +/*! + * @brief Disables the interrupt status. + * + * @param base USDHC peripheral base address. + * @param mask The interrupt status flags mask(@ref _usdhc_interrupt_status_flag). + */ +static inline void USDHC_DisableInterruptStatus(USDHC_Type *base, uint32_t mask) +{ + base->INT_STATUS_EN &= ~mask; +} + +/*! + * @brief Enables the interrupt signal corresponding to the interrupt status flag. + * + * @param base USDHC peripheral base address. + * @param mask The interrupt status flags mask(@ref _usdhc_interrupt_status_flag). + */ +static inline void USDHC_EnableInterruptSignal(USDHC_Type *base, uint32_t mask) +{ + base->INT_SIGNAL_EN |= mask; +} + +/*! + * @brief Disables the interrupt signal corresponding to the interrupt status flag. + * + * @param base USDHC peripheral base address. + * @param mask The interrupt status flags mask(@ref _usdhc_interrupt_status_flag). + */ +static inline void USDHC_DisableInterruptSignal(USDHC_Type *base, uint32_t mask) +{ + base->INT_SIGNAL_EN &= ~mask; +} + +/* @} */ + +/*! + * @name Status + * @{ + */ + +/*! + * @brief Gets the enabled interrupt status. + * + * @param base USDHC peripheral base address. + * @return Current interrupt status flags mask(@ref _usdhc_interrupt_status_flag). + */ +static inline uint32_t USDHC_GetEnabledInterruptStatusFlags(USDHC_Type *base) +{ + uint32_t intStatus = base->INT_STATUS; + + return intStatus & base->INT_SIGNAL_EN; +} + +/*! + * @brief Gets the current interrupt status. + * + * @param base USDHC peripheral base address. + * @return Current interrupt status flags mask(@ref _usdhc_interrupt_status_flag). + */ +static inline uint32_t USDHC_GetInterruptStatusFlags(USDHC_Type *base) +{ + return base->INT_STATUS; +} + +/*! + * @brief Clears a specified interrupt status. + * write 1 clears + * @param base USDHC peripheral base address. + * @param mask The interrupt status flags mask(@ref _usdhc_interrupt_status_flag). + */ +static inline void USDHC_ClearInterruptStatusFlags(USDHC_Type *base, uint32_t mask) +{ + base->INT_STATUS = mask; +} + +/*! + * @brief Gets the status of auto command 12 error. + * + * @param base USDHC peripheral base address. + * @return Auto command 12 error status flags mask(@ref _usdhc_auto_command12_error_status_flag). + */ +static inline uint32_t USDHC_GetAutoCommand12ErrorStatusFlags(USDHC_Type *base) +{ + return base->AUTOCMD12_ERR_STATUS; +} + +/*! + * @brief Gets the status of the ADMA error. + * + * @param base USDHC peripheral base address. + * @return ADMA error status flags mask(@ref _usdhc_adma_error_status_flag). + */ +static inline uint32_t USDHC_GetAdmaErrorStatusFlags(USDHC_Type *base) +{ + return base->ADMA_ERR_STATUS & 0xFUL; +} + +/*! + * @brief Gets a present status. + * + * This function gets the present USDHC's status except for an interrupt status and an error status. + * + * @param base USDHC peripheral base address. + * @return Present USDHC's status flags mask(@ref _usdhc_present_status_flag). + */ +static inline uint32_t USDHC_GetPresentStatusFlags(USDHC_Type *base) +{ + return base->PRES_STATE; +} + +/* @} */ + +/*! + * @name Bus Operations + * @{ + */ + +/*! + * @brief Gets the capability information. + * + * @param base USDHC peripheral base address. + * @param capability Structure to save capability information. + */ +void USDHC_GetCapability(USDHC_Type *base, usdhc_capability_t *capability); + +/*! + * @brief Forces the card clock on. + * + * @param base USDHC peripheral base address. + * @param enable enable/disable flag + */ +static inline void USDHC_ForceClockOn(USDHC_Type *base, bool enable) +{ + if (enable) + { + base->VEND_SPEC |= USDHC_VEND_SPEC_FRC_SDCLK_ON_MASK; + } + else + { + base->VEND_SPEC &= ~USDHC_VEND_SPEC_FRC_SDCLK_ON_MASK; + } +} + +/*! + * @brief Sets the SD bus clock frequency. + * + * @param base USDHC peripheral base address. + * @param srcClock_Hz USDHC source clock frequency united in Hz. + * @param busClock_Hz SD bus clock frequency united in Hz. + * + * @return The nearest frequency of busClock_Hz configured for SD bus. + */ +uint32_t USDHC_SetSdClock(USDHC_Type *base, uint32_t srcClock_Hz, uint32_t busClock_Hz); + +/*! + * @brief Sends 80 clocks to the card to set it to the active state. + * + * This function must be called each time the card is inserted to ensure that the card can receive the command + * correctly. + * + * @param base USDHC peripheral base address. + * @param timeout Timeout to initialize card. + * @retval true Set card active successfully. + * @retval false Set card active failed. + */ +bool USDHC_SetCardActive(USDHC_Type *base, uint32_t timeout); + +/*! + * @brief Triggers a hardware reset. + * + * @param base USDHC peripheral base address. + * @param high 1 or 0 level + */ +static inline void USDHC_AssertHardwareReset(USDHC_Type *base, bool high) +{ + if (high) + { + base->SYS_CTRL |= USDHC_SYS_CTRL_IPP_RST_N_MASK; + } + else + { + base->SYS_CTRL &= ~USDHC_SYS_CTRL_IPP_RST_N_MASK; + } +} + +/*! + * @brief Sets the data transfer width. + * + * @param base USDHC peripheral base address. + * @param width Data transfer width. + */ +static inline void USDHC_SetDataBusWidth(USDHC_Type *base, usdhc_data_bus_width_t width) +{ + base->PROT_CTRL = ((base->PROT_CTRL & ~USDHC_PROT_CTRL_DTW_MASK) | USDHC_PROT_CTRL_DTW(width)); +} + +/*! + * @brief Fills the data port. + * + * This function is used to implement the data transfer by Data Port instead of DMA. + * + * @param base USDHC peripheral base address. + * @param data The data about to be sent. + */ +static inline void USDHC_WriteData(USDHC_Type *base, uint32_t data) +{ + base->DATA_BUFF_ACC_PORT = data; +} + +/*! + * @brief Retrieves the data from the data port. + * + * This function is used to implement the data transfer by Data Port instead of DMA. + * + * @param base USDHC peripheral base address. + * @return The data has been read. + */ +static inline uint32_t USDHC_ReadData(USDHC_Type *base) +{ + return base->DATA_BUFF_ACC_PORT; +} + +/*! + * @brief Sends command function. + * + * @param base USDHC peripheral base address. + * @param command configuration + */ +void USDHC_SendCommand(USDHC_Type *base, usdhc_command_t *command); + +/*! + * @brief Enables or disables a wakeup event in low-power mode. + * + * @param base USDHC peripheral base address. + * @param mask Wakeup events mask(@ref _usdhc_wakeup_event). + * @param enable True to enable, false to disable. + */ +static inline void USDHC_EnableWakeupEvent(USDHC_Type *base, uint32_t mask, bool enable) +{ + if (enable) + { + base->PROT_CTRL |= mask; + } + else + { + base->PROT_CTRL &= ~mask; + } +} + +/*! + * @brief Detects card insert status. + * + * @param base USDHC peripheral base address. + * @param enable enable/disable flag + */ +static inline void USDHC_CardDetectByData3(USDHC_Type *base, bool enable) +{ + if (enable) + { + base->PROT_CTRL |= USDHC_PROT_CTRL_D3CD_MASK; + } + else + { + base->PROT_CTRL &= ~USDHC_PROT_CTRL_D3CD_MASK; + } +} + +/*! + * @brief Detects card insert status. + * + * @param base USDHC peripheral base address. + */ +static inline bool USDHC_DetectCardInsert(USDHC_Type *base) +{ + return ((base->PRES_STATE & (uint32_t)kUSDHC_CardInsertedFlag) != 0UL) ? true : false; +} + +/*! + * @brief Enables or disables the SDIO card control. + * + * @param base USDHC peripheral base address. + * @param mask SDIO card control flags mask(@ref _usdhc_sdio_control_flag). + * @param enable True to enable, false to disable. + */ +static inline void USDHC_EnableSdioControl(USDHC_Type *base, uint32_t mask, bool enable) +{ + if (enable) + { + base->PROT_CTRL |= mask; + } + else + { + base->PROT_CTRL &= ~mask; + } +} + +/*! + * @brief Restarts a transaction which has stopped at the block GAP for the SDIO card. + * + * @param base USDHC peripheral base address. + */ +static inline void USDHC_SetContinueRequest(USDHC_Type *base) +{ + base->PROT_CTRL |= USDHC_PROT_CTRL_CREQ_MASK; +} + +/*! + * @brief Request stop at block gap function. + * + * @param base USDHC peripheral base address. + * @param enable True to stop at block gap, false to normal transfer. + */ +static inline void USDHC_RequestStopAtBlockGap(USDHC_Type *base, bool enable) +{ + if (enable) + { + base->PROT_CTRL |= USDHC_PROT_CTRL_SABGREQ_MASK; + } + else + { + base->PROT_CTRL &= ~USDHC_PROT_CTRL_SABGREQ_MASK; + } +} + +/*! + * @brief Configures the MMC boot feature. + * + * Example: + @code + usdhc_boot_config_t config; + config.ackTimeoutCount = 4; + config.bootMode = kUSDHC_BootModeNormal; + config.blockCount = 5; + config.enableBootAck = true; + config.enableBoot = true; + config.enableAutoStopAtBlockGap = true; + USDHC_SetMmcBootConfig(USDHC, &config); + @endcode + * + * @param base USDHC peripheral base address. + * @param config The MMC boot configuration information. + */ +void USDHC_SetMmcBootConfig(USDHC_Type *base, const usdhc_boot_config_t *config); + +/*! + * @brief Enables or disables the mmc boot mode. + * + * @param base USDHC peripheral base address. + * @param enable True to enable, false to disable. + */ +static inline void USDHC_EnableMmcBoot(USDHC_Type *base, bool enable) +{ + if (enable) + { + base->MMC_BOOT |= USDHC_MMC_BOOT_BOOT_EN_MASK; + } + else + { + base->MMC_BOOT &= ~USDHC_MMC_BOOT_BOOT_EN_MASK; + } +} + +/*! + * @brief Forces generating events according to the given mask. + * + * @param base USDHC peripheral base address. + * @param mask The force events bit posistion (_usdhc_force_event). + */ +static inline void USDHC_SetForceEvent(USDHC_Type *base, uint32_t mask) +{ + base->FORCE_EVENT = mask; +} + +#if !(defined(FSL_FEATURE_USDHC_HAS_NO_VOLTAGE_SELECT) && (FSL_FEATURE_USDHC_HAS_NO_VOLTAGE_SELECT)) +/*! + * @brief Selects the USDHC output voltage. + * + * @param base USDHC peripheral base address. + * @param en18v True means 1.8V, false means 3.0V. + */ +static inline void UDSHC_SelectVoltage(USDHC_Type *base, bool en18v) +{ + if (en18v) + { + base->VEND_SPEC |= USDHC_VEND_SPEC_VSELECT_MASK; + } + else + { + base->VEND_SPEC &= ~USDHC_VEND_SPEC_VSELECT_MASK; + } +} +#endif + +#if defined(FSL_FEATURE_USDHC_HAS_SDR50_MODE) && (FSL_FEATURE_USDHC_HAS_SDR50_MODE) +/*! + * @brief Checks the SDR50 mode request tuning bit. + * When this bit set, application shall perform tuning for SDR50 mode. + * @param base USDHC peripheral base address. + */ +static inline bool USDHC_RequestTuningForSDR50(USDHC_Type *base) +{ + return ((base->HOST_CTRL_CAP & USDHC_HOST_CTRL_CAP_USE_TUNING_SDR50_MASK) != 0UL) ? true : false; +} + +/*! + * @brief Checks the request re-tuning bit. + * When this bit is set, user should do manual tuning or standard tuning function. + * @param base USDHC peripheral base address. + */ +static inline bool USDHC_RequestReTuning(USDHC_Type *base) +{ + return ((base->PRES_STATE & USDHC_PRES_STATE_RTR_MASK) != 0UL) ? true : false; +} + +/*! + * @brief The SDR104 mode auto tuning enable and disable. + * This function should be called after tuning function execute pass, auto tuning will handle + * by hardware. + * @param base USDHC peripheral base address. + * @param enable enable/disable flag + */ +static inline void USDHC_EnableAutoTuning(USDHC_Type *base, bool enable) +{ + if (enable) + { + base->MIX_CTRL |= USDHC_MIX_CTRL_AUTO_TUNE_EN_MASK; + } + else + { + base->MIX_CTRL &= ~USDHC_MIX_CTRL_AUTO_TUNE_EN_MASK; + } +} + +#if !(defined(FSL_FEATURE_USDHC_REGISTER_HOST_CTRL_CAP_HAS_NO_RETUNING_TIME_COUNTER) && \ + FSL_FEATURE_USDHC_REGISTER_HOST_CTRL_CAP_HAS_NO_RETUNING_TIME_COUNTER) +/*! + * @brief Configs the re-tuning timer for mode 1 and mode 3. + * This timer is used for standard tuning auto re-tuning, + * @param base USDHC peripheral base address. + * @param counter timer counter value + */ +static inline void USDHC_SetRetuningTimer(USDHC_Type *base, uint32_t counter) +{ + base->HOST_CTRL_CAP &= ~USDHC_HOST_CTRL_CAP_TIME_COUNT_RETUNING_MASK; + base->HOST_CTRL_CAP |= USDHC_HOST_CTRL_CAP_TIME_COUNT_RETUNING(counter); +} +#endif /* FSL_FEATURE_USDHC_REGISTER_HOST_CTRL_CAP_HAS_RETUNING_TIME_COUNTER */ + +/*! + * @brief The auto tuning enbale for CMD/DATA line. + * + * @param base USDHC peripheral base address. + */ +void USDHC_EnableAutoTuningForCmdAndData(USDHC_Type *base); + +/*! + * @brief Manual tuning trigger or abort. + * User should handle the tuning cmd and find the boundary of the delay + * then calucate a average value which will be configured to the <b>CLK_TUNE_CTRL_STATUS</b> + * This function should be called before function @ref USDHC_AdjustDelayForManualTuning. + * @param base USDHC peripheral base address. + * @param enable tuning enable flag + */ +void USDHC_EnableManualTuning(USDHC_Type *base, bool enable); + +/*! + * @brief Get the tuning delay cell setting. + * + * @param base USDHC peripheral base address. + * @retval CLK Tuning Control and Status register value. + */ +static inline uint32_t USDHC_GetTuningDelayStatus(USDHC_Type *base) +{ + return base->CLK_TUNE_CTRL_STATUS >> 16U; +} + +/*! + * @brief The tuning delay cell setting. + * + * @param base USDHC peripheral base address. + * @param preDelay Set the number of delay cells on the feedback clock between the feedback clock and CLK_PRE. + * @param outDelay Set the number of delay cells on the feedback clock between CLK_PRE and CLK_OUT. + * @param postDelay Set the number of delay cells on the feedback clock between CLK_OUT and CLK_POST. + * @retval kStatus_Fail config the delay setting fail + * @retval kStatus_Success config the delay setting success + */ +status_t USDHC_SetTuningDelay(USDHC_Type *base, uint32_t preDelay, uint32_t outDelay, uint32_t postDelay); + +/*! + * @brief Adjusts delay for mannual tuning. + * @deprecated Do not use this function. It has been superceded by USDHC_SetTuingDelay + * @param base USDHC peripheral base address. + * @param delay setting configuration + * @retval #kStatus_Fail config the delay setting fail + * @retval #kStatus_Success config the delay setting success + */ +status_t USDHC_AdjustDelayForManualTuning(USDHC_Type *base, uint32_t delay); + +/*! + * @brief set tuning counter tuning. + * @param base USDHC peripheral base address. + * @param counter tuning counter + * @retval #kStatus_Fail config the delay setting fail + * @retval #kStatus_Success config the delay setting success + */ +static inline void USDHC_SetStandardTuningCounter(USDHC_Type *base, uint8_t counter) +{ + base->TUNING_CTRL = + (base->TUNING_CTRL & (~USDHC_TUNING_CTRL_TUNING_COUNTER_MASK)) | USDHC_TUNING_CTRL_TUNING_COUNTER(counter); +} + +/*! + * @brief The enable standard tuning function. + * The standard tuning window and tuning counter using the default config + * tuning cmd is sent by the software, user need to check whether the tuning result + * can be used for SDR50, SDR104, and HS200 mode tuning. + * @param base USDHC peripheral base address. + * @param tuningStartTap start tap + * @param step tuning step + * @param enable enable/disable flag + */ +void USDHC_EnableStandardTuning(USDHC_Type *base, uint32_t tuningStartTap, uint32_t step, bool enable); + +/*! + * @brief Gets execute STD tuning status. + * + * @param base USDHC peripheral base address. + */ +static inline uint32_t USDHC_GetExecuteStdTuningStatus(USDHC_Type *base) +{ + return (base->AUTOCMD12_ERR_STATUS & USDHC_AUTOCMD12_ERR_STATUS_EXECUTE_TUNING_MASK); +} + +/*! + * @brief Checks STD tuning result. + * + * @param base USDHC peripheral base address. + */ +static inline uint32_t USDHC_CheckStdTuningResult(USDHC_Type *base) +{ + return (base->AUTOCMD12_ERR_STATUS & USDHC_AUTOCMD12_ERR_STATUS_SMP_CLK_SEL_MASK); +} + +/*! + * @brief Checks tuning error. + * + * @param base USDHC peripheral base address. + */ +static inline uint32_t USDHC_CheckTuningError(USDHC_Type *base) +{ + return (base->CLK_TUNE_CTRL_STATUS & + (USDHC_CLK_TUNE_CTRL_STATUS_NXT_ERR_MASK | USDHC_CLK_TUNE_CTRL_STATUS_PRE_ERR_MASK)); +} + +#endif +/*! + * @brief The enable/disable DDR mode. + * + * @param base USDHC peripheral base address. + * @param enable enable/disable flag + * @param nibblePos nibble position + */ +void USDHC_EnableDDRMode(USDHC_Type *base, bool enable, uint32_t nibblePos); + +#if FSL_FEATURE_USDHC_HAS_HS400_MODE +/*! + * @brief The enable/disable HS400 mode. + * + * @param base USDHC peripheral base address. + * @param enable enable/disable flag + */ +static inline void USDHC_EnableHS400Mode(USDHC_Type *base, bool enable) +{ + if (enable) + { + base->MIX_CTRL |= USDHC_MIX_CTRL_HS400_MODE_MASK; + } + else + { + base->MIX_CTRL &= ~USDHC_MIX_CTRL_HS400_MODE_MASK; + } +} + +/*! + * @brief Resets the strobe DLL. + * + * @param base USDHC peripheral base address. + */ +static inline void USDHC_ResetStrobeDLL(USDHC_Type *base) +{ + base->STROBE_DLL_CTRL |= USDHC_STROBE_DLL_CTRL_STROBE_DLL_CTRL_RESET_MASK; +} + +/*! + * @brief Enables/disables the strobe DLL. + * + * @param base USDHC peripheral base address. + * @param enable enable/disable flag + */ +static inline void USDHC_EnableStrobeDLL(USDHC_Type *base, bool enable) +{ + if (enable) + { + base->STROBE_DLL_CTRL |= USDHC_STROBE_DLL_CTRL_STROBE_DLL_CTRL_ENABLE_MASK; + } + else + { + base->STROBE_DLL_CTRL &= ~USDHC_STROBE_DLL_CTRL_STROBE_DLL_CTRL_ENABLE_MASK; + } +} + +/*! + * @brief Configs the strobe DLL delay target and update interval. + * + * @param base USDHC peripheral base address. + * @param delayTarget delay target + * @param updateInterval update interval + */ +void USDHC_ConfigStrobeDLL(USDHC_Type *base, uint32_t delayTarget, uint32_t updateInterval); + +/*! + * @brief Enables manual override for slave delay chain using <b>STROBE_SLV_OVERRIDE_VAL</b>. + * + * @param base USDHC peripheral base address. + * @param delayTaps Valid delay taps range from 1 - 128 taps. A value of 0 selects tap 1, and a value of 0x7F selects + * tap 128. + */ +static inline void USDHC_SetStrobeDllOverride(USDHC_Type *base, uint32_t delayTaps) +{ + base->STROBE_DLL_CTRL &= (USDHC_STROBE_DLL_CTRL_STROBE_DLL_CTRL_ENABLE_MASK | + USDHC_STROBE_DLL_CTRL_STROBE_DLL_CTRL_SLV_OVERRIDE_VAL_MASK); + + base->STROBE_DLL_CTRL |= USDHC_STROBE_DLL_CTRL_STROBE_DLL_CTRL_SLV_OVERRIDE_MASK | + USDHC_STROBE_DLL_CTRL_STROBE_DLL_CTRL_SLV_OVERRIDE_VAL(delayTaps); +} + +/*! + * @brief Gets the strobe DLL status. + * + * @param base USDHC peripheral base address. + */ +static inline uint32_t USDHC_GetStrobeDLLStatus(USDHC_Type *base) +{ + return base->STROBE_DLL_STATUS; +} + +#endif + +/*! + * @brief USDHC data configuration. + * + * @param base USDHC peripheral base address. + * @param dataDirection Data direction, tx or rx. + * @param blockCount Data block count. + * @param blockSize Data block size. + * + */ +void USDHC_SetDataConfig(USDHC_Type *base, + usdhc_transfer_direction_t dataDirection, + uint32_t blockCount, + uint32_t blockSize); +/* @} */ + +/*! + * @name Transactional functions + * @{ + */ + +/*! + * @brief Creates the USDHC handle. + * + * @param base USDHC peripheral base address. + * @param handle USDHC handle pointer. + * @param callback Structure pointer to contain all callback functions. + * @param userData Callback function parameter. + */ +void USDHC_TransferCreateHandle(USDHC_Type *base, + usdhc_handle_t *handle, + const usdhc_transfer_callback_t *callback, + void *userData); + +#if (defined FSL_USDHC_ENABLE_SCATTER_GATHER_TRANSFER) && FSL_USDHC_ENABLE_SCATTER_GATHER_TRANSFER +/*! + * @brief Transfers the command/scatter gather data using an interrupt and an asynchronous method. + * + * This function sends a command and data and returns immediately. It doesn't wait for the transfer to complete or + * to encounter an error. The application must not call this API in multiple threads at the same time. Because of that + * this API doesn't support the re-entry mechanism. + * This function is target for the application would like to have scatter gather buffer to be transferred within one + * read/write request, non scatter gather buffer is support by this function also. + * + * @note Call API @ref USDHC_TransferCreateHandle when calling this API. + * + * @param base USDHC peripheral base address. + * @param handle USDHC handle. + * @param dmaConfig adma configurations, must be not NULL, since the function is target for ADMA only. + * @param transfer scatter gather transfer content. + * + * @retval #kStatus_InvalidArgument Argument is invalid. + * @retval #kStatus_USDHC_BusyTransferring Busy transferring. + * @retval #kStatus_USDHC_PrepareAdmaDescriptorFailed Prepare ADMA descriptor failed. + * @retval #kStatus_Success Operate successfully. + */ +status_t USDHC_TransferScatterGatherADMANonBlocking(USDHC_Type *base, + usdhc_handle_t *handle, + usdhc_adma_config_t *dmaConfig, + usdhc_scatter_gather_transfer_t *transfer); +#else +/*! + * @brief Transfers the command/data using an interrupt and an asynchronous method. + * + * This function sends a command and data and returns immediately. It doesn't wait for the transfer to complete or + * to encounter an error. The application must not call this API in multiple threads at the same time. Because of that + * this API doesn't support the re-entry mechanism. + * + * @note Call API @ref USDHC_TransferCreateHandle when calling this API. + * + * @param base USDHC peripheral base address. + * @param handle USDHC handle. + * @param dmaConfig ADMA configuration. + * @param transfer Transfer content. + * @retval #kStatus_InvalidArgument Argument is invalid. + * @retval #kStatus_USDHC_BusyTransferring Busy transferring. + * @retval #kStatus_USDHC_PrepareAdmaDescriptorFailed Prepare ADMA descriptor failed. + * @retval #kStatus_Success Operate successfully. + */ +status_t USDHC_TransferNonBlocking(USDHC_Type *base, + usdhc_handle_t *handle, + usdhc_adma_config_t *dmaConfig, + usdhc_transfer_t *transfer); +#endif + +/*! + * @brief Transfers the command/data using a blocking method. + * + * This function waits until the command response/data is received or the USDHC encounters an error by polling the + * status flag. \n + * The application must not call this API in multiple threads at the same time. Because this API doesn't + * support the re-entry mechanism. + * + * @note There is no need to call API @ref USDHC_TransferCreateHandle when calling this API. + * + * @param base USDHC peripheral base address. + * @param dmaConfig adma configuration + * @param transfer Transfer content. + * @retval #kStatus_InvalidArgument Argument is invalid. + * @retval #kStatus_USDHC_PrepareAdmaDescriptorFailed Prepare ADMA descriptor failed. + * @retval #kStatus_USDHC_SendCommandFailed Send command failed. + * @retval #kStatus_USDHC_TransferDataFailed Transfer data failed. + * @retval #kStatus_Success Operate successfully. + */ +status_t USDHC_TransferBlocking(USDHC_Type *base, usdhc_adma_config_t *dmaConfig, usdhc_transfer_t *transfer); + +/*! + * @brief IRQ handler for the USDHC. + * + * This function deals with the IRQs on the given host controller. + * + * @param base USDHC peripheral base address. + * @param handle USDHC handle. + */ +void USDHC_TransferHandleIRQ(USDHC_Type *base, usdhc_handle_t *handle); + +/* @} */ + +#if defined(__cplusplus) +} +#endif +/*! @} */ + +#endif /* _FSL_USDHC_H_*/ |