diff options
Diffstat (limited to '')
-rw-r--r-- | bsps/arm/imxrt/mcux-sdk/drivers/usdhc/fsl_usdhc.h | 1703 |
1 files changed, 1703 insertions, 0 deletions
diff --git a/bsps/arm/imxrt/mcux-sdk/drivers/usdhc/fsl_usdhc.h b/bsps/arm/imxrt/mcux-sdk/drivers/usdhc/fsl_usdhc.h new file mode 100644 index 0000000000..9cf1fc07c3 --- /dev/null +++ b/bsps/arm/imxrt/mcux-sdk/drivers/usdhc/fsl_usdhc.h @@ -0,0 +1,1703 @@ +/* + * Copyright (c) 2016, Freescale Semiconductor, Inc. + * Copyright 2016-2021 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ +#ifndef _FSL_USDHC_H_ +#define _FSL_USDHC_H_ + +#include "fsl_common.h" + +/*! + * @addtogroup usdhc + * @{ + */ + +/****************************************************************************** + * Definitions. + *****************************************************************************/ + +/*! @name Driver version */ +/*@{*/ +/*! @brief Driver version 2.8.2. */ +#define FSL_USDHC_DRIVER_VERSION (MAKE_VERSION(2U, 8U, 2U)) +/*@}*/ + +/*! @brief Maximum block count can be set one time */ +#define USDHC_MAX_BLOCK_COUNT (USDHC_BLK_ATT_BLKCNT_MASK >> USDHC_BLK_ATT_BLKCNT_SHIFT) + +/*! @brief USDHC scatter gather feature control macro */ +#ifndef FSL_USDHC_ENABLE_SCATTER_GATHER_TRANSFER +#define FSL_USDHC_ENABLE_SCATTER_GATHER_TRANSFER 0U +#endif + +/*! @brief Enum _usdhc_status. USDHC status. */ +enum +{ + kStatus_USDHC_BusyTransferring = MAKE_STATUS(kStatusGroup_USDHC, 0U), /*!< Transfer is on-going. */ + kStatus_USDHC_PrepareAdmaDescriptorFailed = MAKE_STATUS(kStatusGroup_USDHC, 1U), /*!< Set DMA descriptor failed. */ + kStatus_USDHC_SendCommandFailed = MAKE_STATUS(kStatusGroup_USDHC, 2U), /*!< Send command failed. */ + kStatus_USDHC_TransferDataFailed = MAKE_STATUS(kStatusGroup_USDHC, 3U), /*!< Transfer data failed. */ + kStatus_USDHC_DMADataAddrNotAlign = MAKE_STATUS(kStatusGroup_USDHC, 4U), /*!< Data address not aligned. */ + kStatus_USDHC_ReTuningRequest = MAKE_STATUS(kStatusGroup_USDHC, 5U), /*!< Re-tuning request. */ + kStatus_USDHC_TuningError = MAKE_STATUS(kStatusGroup_USDHC, 6U), /*!< Tuning error. */ + kStatus_USDHC_NotSupport = MAKE_STATUS(kStatusGroup_USDHC, 7U), /*!< Not support. */ + kStatus_USDHC_TransferDataComplete = MAKE_STATUS(kStatusGroup_USDHC, 8U), /*!< Transfer data complete. */ + kStatus_USDHC_SendCommandSuccess = MAKE_STATUS(kStatusGroup_USDHC, 9U), /*!< Transfer command complete. */ + kStatus_USDHC_TransferDMAComplete = MAKE_STATUS(kStatusGroup_USDHC, 10U), /*!< Transfer DMA complete. */ +}; + +/*! @brief Enum _usdhc_capability_flag. Host controller capabilities flag mask. + * @anchor _usdhc_capability_flag + */ +enum +{ + kUSDHC_SupportAdmaFlag = USDHC_HOST_CTRL_CAP_ADMAS_MASK, /*!< Support ADMA. */ + kUSDHC_SupportHighSpeedFlag = USDHC_HOST_CTRL_CAP_HSS_MASK, /*!< Support high-speed. */ + kUSDHC_SupportDmaFlag = USDHC_HOST_CTRL_CAP_DMAS_MASK, /*!< Support DMA. */ + kUSDHC_SupportSuspendResumeFlag = USDHC_HOST_CTRL_CAP_SRS_MASK, /*!< Support suspend/resume. */ + kUSDHC_SupportV330Flag = USDHC_HOST_CTRL_CAP_VS33_MASK, /*!< Support voltage 3.3V. */ + kUSDHC_SupportV300Flag = USDHC_HOST_CTRL_CAP_VS30_MASK, /*!< Support voltage 3.0V. */ + kUSDHC_SupportV180Flag = USDHC_HOST_CTRL_CAP_VS18_MASK, /*!< Support voltage 1.8V. */ + kUSDHC_Support4BitFlag = (USDHC_HOST_CTRL_CAP_MBL_SHIFT << 0U), + /*!< Flag in HTCAPBLT_MBL's position, supporting 4-bit mode. */ + kUSDHC_Support8BitFlag = (USDHC_HOST_CTRL_CAP_MBL_SHIFT << 1U), + /*!< Flag in HTCAPBLT_MBL's position, supporting 8-bit mode. */ + kUSDHC_SupportDDR50Flag = USDHC_HOST_CTRL_CAP_DDR50_SUPPORT_MASK, +/*!< SD version 3.0 new feature, supporting DDR50 mode. */ + +#if defined(FSL_FEATURE_USDHC_HAS_SDR104_MODE) && (!FSL_FEATURE_USDHC_HAS_SDR104_MODE) + kUSDHC_SupportSDR104Flag = 0, /*!< not support SDR104 mode */ +#else + kUSDHC_SupportSDR104Flag = USDHC_HOST_CTRL_CAP_SDR104_SUPPORT_MASK, /*!< Support SDR104 mode. */ +#endif +#if defined(FSL_FEATURE_USDHC_HAS_SDR50_MODE) && (!FSL_FEATURE_USDHC_HAS_SDR50_MODE) + kUSDHC_SupportSDR50Flag = 0U, /*!< not support SDR50 mode */ +#else + kUSDHC_SupportSDR50Flag = USDHC_HOST_CTRL_CAP_SDR50_SUPPORT_MASK, /*!< Support SDR50 mode. */ +#endif +}; + +/*! @brief Enum _usdhc_wakeup_event. Wakeup event mask. + * @anchor _usdhc_wakeup_event + */ +enum +{ + kUSDHC_WakeupEventOnCardInt = USDHC_PROT_CTRL_WECINT_MASK, /*!< Wakeup on card interrupt. */ + kUSDHC_WakeupEventOnCardInsert = USDHC_PROT_CTRL_WECINS_MASK, /*!< Wakeup on card insertion. */ + kUSDHC_WakeupEventOnCardRemove = USDHC_PROT_CTRL_WECRM_MASK, /*!< Wakeup on card removal. */ + kUSDHC_WakeupEventsAll = + (kUSDHC_WakeupEventOnCardInt | kUSDHC_WakeupEventOnCardInsert | kUSDHC_WakeupEventOnCardRemove), + /*!< All wakeup events */ +}; + +/*! @brief Enum _usdhc_reset. Reset type mask. + * @anchor _usdhc_reset + */ +enum +{ + kUSDHC_ResetAll = USDHC_SYS_CTRL_RSTA_MASK, /*!< Reset all except card detection. */ + kUSDHC_ResetCommand = USDHC_SYS_CTRL_RSTC_MASK, /*!< Reset command line. */ + kUSDHC_ResetData = USDHC_SYS_CTRL_RSTD_MASK, /*!< Reset data line. */ + +#if defined(FSL_FEATURE_USDHC_HAS_SDR50_MODE) && (!FSL_FEATURE_USDHC_HAS_SDR50_MODE) + kUSDHC_ResetTuning = 0U, /*!< no reset tuning circuit bit */ +#else + kUSDHC_ResetTuning = USDHC_SYS_CTRL_RSTT_MASK, /*!< Reset tuning circuit. */ +#endif + + kUSDHC_ResetsAll = (kUSDHC_ResetAll | kUSDHC_ResetCommand | kUSDHC_ResetData | kUSDHC_ResetTuning), + /*!< All reset types */ +}; + +/*! @brief Enum _usdhc_transfer_flag. Transfer flag mask. */ +enum +{ + kUSDHC_EnableDmaFlag = USDHC_MIX_CTRL_DMAEN_MASK, /*!< Enable DMA. */ + + kUSDHC_CommandTypeSuspendFlag = USDHC_CMD_XFR_TYP_CMDTYP(1U), /*!< Suspend command. */ + kUSDHC_CommandTypeResumeFlag = USDHC_CMD_XFR_TYP_CMDTYP(2U), /*!< Resume command. */ + kUSDHC_CommandTypeAbortFlag = USDHC_CMD_XFR_TYP_CMDTYP(3U), /*!< Abort command. */ + + kUSDHC_EnableBlockCountFlag = USDHC_MIX_CTRL_BCEN_MASK, /*!< Enable block count. */ + kUSDHC_EnableAutoCommand12Flag = USDHC_MIX_CTRL_AC12EN_MASK, /*!< Enable auto CMD12. */ + kUSDHC_DataReadFlag = USDHC_MIX_CTRL_DTDSEL_MASK, /*!< Enable data read. */ + kUSDHC_MultipleBlockFlag = USDHC_MIX_CTRL_MSBSEL_MASK, /*!< Multiple block data read/write. */ + kUSDHC_EnableAutoCommand23Flag = USDHC_MIX_CTRL_AC23EN_MASK, /*!< Enable auto CMD23. */ + + kUSDHC_ResponseLength136Flag = USDHC_CMD_XFR_TYP_RSPTYP(1U), /*!< 136-bit response length. */ + kUSDHC_ResponseLength48Flag = USDHC_CMD_XFR_TYP_RSPTYP(2U), /*!< 48-bit response length. */ + kUSDHC_ResponseLength48BusyFlag = USDHC_CMD_XFR_TYP_RSPTYP(3U), /*!< 48-bit response length with busy status. */ + + kUSDHC_EnableCrcCheckFlag = USDHC_CMD_XFR_TYP_CCCEN_MASK, /*!< Enable CRC check. */ + kUSDHC_EnableIndexCheckFlag = USDHC_CMD_XFR_TYP_CICEN_MASK, /*!< Enable index check. */ + kUSDHC_DataPresentFlag = USDHC_CMD_XFR_TYP_DPSEL_MASK, /*!< Data present flag. */ +}; + +/*! @brief Enum _usdhc_present_status_flag. Present status flag mask. + * @anchor _usdhc_present_status_flag + */ +enum +{ + kUSDHC_CommandInhibitFlag = USDHC_PRES_STATE_CIHB_MASK, /*!< Command inhibit. */ + kUSDHC_DataInhibitFlag = USDHC_PRES_STATE_CDIHB_MASK, /*!< Data inhibit. */ + kUSDHC_DataLineActiveFlag = USDHC_PRES_STATE_DLA_MASK, /*!< Data line active. */ + kUSDHC_SdClockStableFlag = USDHC_PRES_STATE_SDSTB_MASK, /*!< SD bus clock stable. */ + kUSDHC_WriteTransferActiveFlag = USDHC_PRES_STATE_WTA_MASK, /*!< Write transfer active. */ + kUSDHC_ReadTransferActiveFlag = USDHC_PRES_STATE_RTA_MASK, /*!< Read transfer active. */ + kUSDHC_BufferWriteEnableFlag = USDHC_PRES_STATE_BWEN_MASK, /*!< Buffer write enable. */ + kUSDHC_BufferReadEnableFlag = USDHC_PRES_STATE_BREN_MASK, /*!< Buffer read enable. */ + +#if defined(FSL_FEATURE_USDHC_HAS_SDR50_MODE) && (!FSL_FEATURE_USDHC_HAS_SDR50_MODE) + kUSDHC_DelaySettingFinishedFlag = 0U, /*!< not support */ + kUSDHC_ReTuningRequestFlag = 0U, /*!< not support */ +#else + kUSDHC_ReTuningRequestFlag = USDHC_PRES_STATE_RTR_MASK, /*!< Re-tuning request flag, only used for SDR104 mode. */ + kUSDHC_DelaySettingFinishedFlag = USDHC_PRES_STATE_TSCD_MASK, /*!< Delay setting finished flag. */ +#endif + + kUSDHC_CardInsertedFlag = USDHC_PRES_STATE_CINST_MASK, /*!< Card inserted. */ + kUSDHC_CommandLineLevelFlag = USDHC_PRES_STATE_CLSL_MASK, /*!< Command line signal level. */ + + kUSDHC_Data0LineLevelFlag = 1U << USDHC_PRES_STATE_DLSL_SHIFT, /*!< Data0 line signal level. */ + kUSDHC_Data1LineLevelFlag = 1U << (USDHC_PRES_STATE_DLSL_SHIFT + 1U), /*!< Data1 line signal level. */ + kUSDHC_Data2LineLevelFlag = 1U << (USDHC_PRES_STATE_DLSL_SHIFT + 2U), /*!< Data2 line signal level. */ + kUSDHC_Data3LineLevelFlag = 1U << (USDHC_PRES_STATE_DLSL_SHIFT + 3U), /*!< Data3 line signal level. */ + kUSDHC_Data4LineLevelFlag = 1U << (USDHC_PRES_STATE_DLSL_SHIFT + 4U), /*!< Data4 line signal level. */ + kUSDHC_Data5LineLevelFlag = 1U << (USDHC_PRES_STATE_DLSL_SHIFT + 5U), /*!< Data5 line signal level. */ + kUSDHC_Data6LineLevelFlag = 1U << (USDHC_PRES_STATE_DLSL_SHIFT + 6U), /*!< Data6 line signal level. */ + kUSDHC_Data7LineLevelFlag = (int)(1U << (USDHC_PRES_STATE_DLSL_SHIFT + 7U)), /*!< Data7 line signal level. */ +}; + +/*! @brief Enum _usdhc_interrupt_status_flag. Interrupt status flag mask. + * @anchor _usdhc_interrupt_status_flag + */ +enum +{ + kUSDHC_CommandCompleteFlag = USDHC_INT_STATUS_CC_MASK, /*!< Command complete. */ + kUSDHC_DataCompleteFlag = USDHC_INT_STATUS_TC_MASK, /*!< Data complete. */ + kUSDHC_BlockGapEventFlag = USDHC_INT_STATUS_BGE_MASK, /*!< Block gap event. */ + kUSDHC_DmaCompleteFlag = USDHC_INT_STATUS_DINT_MASK, /*!< DMA interrupt. */ + kUSDHC_BufferWriteReadyFlag = USDHC_INT_STATUS_BWR_MASK, /*!< Buffer write ready. */ + kUSDHC_BufferReadReadyFlag = USDHC_INT_STATUS_BRR_MASK, /*!< Buffer read ready. */ + kUSDHC_CardInsertionFlag = USDHC_INT_STATUS_CINS_MASK, /*!< Card inserted. */ + kUSDHC_CardRemovalFlag = USDHC_INT_STATUS_CRM_MASK, /*!< Card removed. */ + kUSDHC_CardInterruptFlag = USDHC_INT_STATUS_CINT_MASK, /*!< Card interrupt. */ + +#if defined(FSL_FEATURE_USDHC_HAS_SDR50_MODE) && (!FSL_FEATURE_USDHC_HAS_SDR50_MODE) + kUSDHC_ReTuningEventFlag = 0U, /*!< Re-Tuning event, only for SD3.0 SDR104 mode. */ + kUSDHC_TuningPassFlag = 0U, /*!< SDR104 mode tuning pass flag. */ + kUSDHC_TuningErrorFlag = 0U, /*!< SDR104 tuning error flag. */ +#else + kUSDHC_ReTuningEventFlag = USDHC_INT_STATUS_RTE_MASK, /*!< Re-Tuning event, only for SD3.0 SDR104 mode. */ + kUSDHC_TuningPassFlag = USDHC_INT_STATUS_TP_MASK, /*!< SDR104 mode tuning pass flag. */ + kUSDHC_TuningErrorFlag = USDHC_INT_STATUS_TNE_MASK, /*!< SDR104 tuning error flag. */ +#endif + + kUSDHC_CommandTimeoutFlag = USDHC_INT_STATUS_CTOE_MASK, /*!< Command timeout error. */ + kUSDHC_CommandCrcErrorFlag = USDHC_INT_STATUS_CCE_MASK, /*!< Command CRC error. */ + kUSDHC_CommandEndBitErrorFlag = USDHC_INT_STATUS_CEBE_MASK, /*!< Command end bit error. */ + kUSDHC_CommandIndexErrorFlag = USDHC_INT_STATUS_CIE_MASK, /*!< Command index error. */ + kUSDHC_DataTimeoutFlag = USDHC_INT_STATUS_DTOE_MASK, /*!< Data timeout error. */ + kUSDHC_DataCrcErrorFlag = USDHC_INT_STATUS_DCE_MASK, /*!< Data CRC error. */ + kUSDHC_DataEndBitErrorFlag = USDHC_INT_STATUS_DEBE_MASK, /*!< Data end bit error. */ + kUSDHC_AutoCommand12ErrorFlag = USDHC_INT_STATUS_AC12E_MASK, /*!< Auto CMD12 error. */ + kUSDHC_DmaErrorFlag = USDHC_INT_STATUS_DMAE_MASK, /*!< DMA error. */ + + kUSDHC_CommandErrorFlag = (kUSDHC_CommandTimeoutFlag | kUSDHC_CommandCrcErrorFlag | kUSDHC_CommandEndBitErrorFlag | + kUSDHC_CommandIndexErrorFlag), /*!< Command error */ + kUSDHC_DataErrorFlag = (kUSDHC_DataTimeoutFlag | kUSDHC_DataCrcErrorFlag | kUSDHC_DataEndBitErrorFlag | + kUSDHC_AutoCommand12ErrorFlag), /*!< Data error */ + kUSDHC_ErrorFlag = (kUSDHC_CommandErrorFlag | kUSDHC_DataErrorFlag | kUSDHC_DmaErrorFlag), /*!< All error */ + + kUSDHC_DataFlag = (kUSDHC_DataCompleteFlag | kUSDHC_BufferWriteReadyFlag | kUSDHC_BufferReadReadyFlag | + kUSDHC_DataErrorFlag), /*!< Data interrupts */ + + kUSDHC_DataDMAFlag = (kUSDHC_DataCompleteFlag | kUSDHC_DataErrorFlag | kUSDHC_DmaErrorFlag), /*!< Data interrupts */ + + kUSDHC_CommandFlag = (kUSDHC_CommandErrorFlag | kUSDHC_CommandCompleteFlag), /*!< Command interrupts */ + kUSDHC_CardDetectFlag = (kUSDHC_CardInsertionFlag | kUSDHC_CardRemovalFlag), /*!< Card detection interrupts */ + kUSDHC_SDR104TuningFlag = (kUSDHC_TuningErrorFlag | kUSDHC_TuningPassFlag | kUSDHC_ReTuningEventFlag), + /*!< SDR104 tuning flag. */ + kUSDHC_AllInterruptFlags = + (kUSDHC_BlockGapEventFlag | kUSDHC_CardInterruptFlag | kUSDHC_CommandFlag | kUSDHC_DataFlag | kUSDHC_ErrorFlag | + kUSDHC_SDR104TuningFlag | kUSDHC_DmaCompleteFlag), /*!< All flags mask */ +}; + +/*! @brief Enum _usdhc_auto_command12_error_status_flag. Auto CMD12 error status flag mask. + * @anchor _usdhc_auto_command12_error_status_flag + */ +enum +{ + kUSDHC_AutoCommand12NotExecutedFlag = USDHC_AUTOCMD12_ERR_STATUS_AC12NE_MASK, /*!< Not executed error. */ + kUSDHC_AutoCommand12TimeoutFlag = USDHC_AUTOCMD12_ERR_STATUS_AC12TOE_MASK, /*!< Timeout error. */ + kUSDHC_AutoCommand12EndBitErrorFlag = USDHC_AUTOCMD12_ERR_STATUS_AC12EBE_MASK, /*!< End bit error. */ + kUSDHC_AutoCommand12CrcErrorFlag = USDHC_AUTOCMD12_ERR_STATUS_AC12CE_MASK, /*!< CRC error. */ + kUSDHC_AutoCommand12IndexErrorFlag = USDHC_AUTOCMD12_ERR_STATUS_AC12IE_MASK, /*!< Index error. */ + kUSDHC_AutoCommand12NotIssuedFlag = USDHC_AUTOCMD12_ERR_STATUS_CNIBAC12E_MASK, /*!< Not issued error. */ +}; + +/*! @brief Enum _usdhc_standard_tuning. Standard tuning flag. */ +enum +{ +#if defined(FSL_FEATURE_USDHC_HAS_SDR50_MODE) && (!FSL_FEATURE_USDHC_HAS_SDR50_MODE) + kUSDHC_ExecuteTuning = 0U, /*!< not support */ + kUSDHC_TuningSampleClockSel = 0U, /*!< not support */ +#else + kUSDHC_ExecuteTuning = USDHC_AUTOCMD12_ERR_STATUS_EXECUTE_TUNING_MASK, /*!< Used to start tuning procedure. */ + kUSDHC_TuningSampleClockSel = + USDHC_AUTOCMD12_ERR_STATUS_SMP_CLK_SEL_MASK, /*!< When <b>std_tuning_en</b> bit is set, this + bit is used to select sampleing clock. */ +#endif +}; + +/*! @brief Enum _usdhc_adma_error_status_flag. ADMA error status flag mask. + * @anchor _usdhc_adma_error_status_flag + */ +enum +{ + kUSDHC_AdmaLenghMismatchFlag = USDHC_ADMA_ERR_STATUS_ADMALME_MASK, /*!< Length mismatch error. */ + kUSDHC_AdmaDescriptorErrorFlag = USDHC_ADMA_ERR_STATUS_ADMADCE_MASK, /*!< Descriptor error. */ +}; + +/*! + * @brief Enum _usdhc_adma_error_state. ADMA error state. + * + * This state is the detail state when ADMA error has occurred. + */ +enum +{ + kUSDHC_AdmaErrorStateStopDma = 0x00U, + /*!< Stop DMA, previous location set in the ADMA system address is errored address. */ + kUSDHC_AdmaErrorStateFetchDescriptor = 0x01U, + /*!< Fetch descriptor, current location set in the ADMA system address is errored address. */ + kUSDHC_AdmaErrorStateChangeAddress = 0x02U, /*!< Change address, no DMA error has occurred. */ + kUSDHC_AdmaErrorStateTransferData = 0x03U, + /*!< Transfer data, previous location set in the ADMA system address is errored address. */ + kUSDHC_AdmaErrorStateInvalidLength = 0x04U, /*!< Invalid length in ADMA descriptor. */ + kUSDHC_AdmaErrorStateInvalidDescriptor = 0x08U, /*!< Invalid descriptor fetched by ADMA. */ + + kUSDHC_AdmaErrorState = kUSDHC_AdmaErrorStateInvalidLength | kUSDHC_AdmaErrorStateInvalidDescriptor | + kUSDHC_AdmaErrorStateFetchDescriptor, /*!< ADMA error state */ +}; + +/*! @brief Enum _usdhc_force_event. Force event bit position. + * @anchor _usdhc_force_event + */ +enum +{ + kUSDHC_ForceEventAutoCommand12NotExecuted = + USDHC_FORCE_EVENT_FEVTAC12NE_MASK, /*!< Auto CMD12 not executed error. */ + kUSDHC_ForceEventAutoCommand12Timeout = USDHC_FORCE_EVENT_FEVTAC12TOE_MASK, /*!< Auto CMD12 timeout error. */ + kUSDHC_ForceEventAutoCommand12CrcError = USDHC_FORCE_EVENT_FEVTAC12CE_MASK, /*!< Auto CMD12 CRC error. */ + kUSDHC_ForceEventEndBitError = USDHC_FORCE_EVENT_FEVTAC12EBE_MASK, /*!< Auto CMD12 end bit error. */ + kUSDHC_ForceEventAutoCommand12IndexError = USDHC_FORCE_EVENT_FEVTAC12IE_MASK, /*!< Auto CMD12 index error. */ + kUSDHC_ForceEventAutoCommand12NotIssued = USDHC_FORCE_EVENT_FEVTCNIBAC12E_MASK, /*!< Auto CMD12 not issued error. */ + kUSDHC_ForceEventCommandTimeout = USDHC_FORCE_EVENT_FEVTCTOE_MASK, /*!< Command timeout error. */ + kUSDHC_ForceEventCommandCrcError = USDHC_FORCE_EVENT_FEVTCCE_MASK, /*!< Command CRC error. */ + kUSDHC_ForceEventCommandEndBitError = USDHC_FORCE_EVENT_FEVTCEBE_MASK, /*!< Command end bit error. */ + kUSDHC_ForceEventCommandIndexError = USDHC_FORCE_EVENT_FEVTCIE_MASK, /*!< Command index error. */ + kUSDHC_ForceEventDataTimeout = USDHC_FORCE_EVENT_FEVTDTOE_MASK, /*!< Data timeout error. */ + kUSDHC_ForceEventDataCrcError = USDHC_FORCE_EVENT_FEVTDCE_MASK, /*!< Data CRC error. */ + kUSDHC_ForceEventDataEndBitError = USDHC_FORCE_EVENT_FEVTDEBE_MASK, /*!< Data end bit error. */ + kUSDHC_ForceEventAutoCommand12Error = USDHC_FORCE_EVENT_FEVTAC12E_MASK, /*!< Auto CMD12 error. */ + kUSDHC_ForceEventCardInt = (int)USDHC_FORCE_EVENT_FEVTCINT_MASK, /*!< Card interrupt. */ + kUSDHC_ForceEventDmaError = USDHC_FORCE_EVENT_FEVTDMAE_MASK, /*!< Dma error. */ +#if defined(FSL_FEATURE_USDHC_HAS_SDR50_MODE) && (!FSL_FEATURE_USDHC_HAS_SDR50_MODE) + kUSDHC_ForceEventTuningError = 0U, /*!< not support */ +#else + kUSDHC_ForceEventTuningError = USDHC_FORCE_EVENT_FEVTTNE_MASK, /*!< Tuning error. */ +#endif + + kUSDHC_ForceEventsAll = + (int)(USDHC_FORCE_EVENT_FEVTAC12NE_MASK | USDHC_FORCE_EVENT_FEVTAC12TOE_MASK | + USDHC_FORCE_EVENT_FEVTAC12CE_MASK | USDHC_FORCE_EVENT_FEVTAC12EBE_MASK | + USDHC_FORCE_EVENT_FEVTAC12IE_MASK | USDHC_FORCE_EVENT_FEVTCNIBAC12E_MASK | + USDHC_FORCE_EVENT_FEVTCTOE_MASK | USDHC_FORCE_EVENT_FEVTCCE_MASK | USDHC_FORCE_EVENT_FEVTCEBE_MASK | + USDHC_FORCE_EVENT_FEVTCIE_MASK | USDHC_FORCE_EVENT_FEVTDTOE_MASK | USDHC_FORCE_EVENT_FEVTDCE_MASK | + USDHC_FORCE_EVENT_FEVTDEBE_MASK | USDHC_FORCE_EVENT_FEVTAC12E_MASK | USDHC_FORCE_EVENT_FEVTCINT_MASK | + USDHC_FORCE_EVENT_FEVTDMAE_MASK | kUSDHC_ForceEventTuningError), /*!< All force event flags mask. */ +}; + +/*! @brief Data transfer direction. */ +typedef enum _usdhc_transfer_direction +{ + kUSDHC_TransferDirectionReceive = 1U, /*!< USDHC transfer direction receive. */ + kUSDHC_TransferDirectionSend = 0U, /*!< USDHC transfer direction send. */ +} usdhc_transfer_direction_t; + +/*! @brief Data transfer width. */ +typedef enum _usdhc_data_bus_width +{ + kUSDHC_DataBusWidth1Bit = 0U, /*!< 1-bit mode */ + kUSDHC_DataBusWidth4Bit = 1U, /*!< 4-bit mode */ + kUSDHC_DataBusWidth8Bit = 2U, /*!< 8-bit mode */ +} usdhc_data_bus_width_t; + +/*! @brief Endian mode */ +typedef enum _usdhc_endian_mode +{ + kUSDHC_EndianModeBig = 0U, /*!< Big endian mode. */ + kUSDHC_EndianModeHalfWordBig = 1U, /*!< Half word big endian mode. */ + kUSDHC_EndianModeLittle = 2U, /*!< Little endian mode. */ +} usdhc_endian_mode_t; + +/*! @brief DMA mode */ +typedef enum _usdhc_dma_mode +{ + kUSDHC_DmaModeSimple = 0U, /*!< External DMA. */ + kUSDHC_DmaModeAdma1 = 1U, /*!< ADMA1 is selected. */ + kUSDHC_DmaModeAdma2 = 2U, /*!< ADMA2 is selected. */ + kUSDHC_ExternalDMA = 3U, /*!< External DMA mode selected. */ +} usdhc_dma_mode_t; + +/*! @brief Enum _usdhc_sdio_control_flag. SDIO control flag mask. + * @anchor _usdhc_sdio_control_flag + */ +enum +{ + kUSDHC_StopAtBlockGapFlag = USDHC_PROT_CTRL_SABGREQ_MASK, /*!< Stop at block gap. */ + kUSDHC_ReadWaitControlFlag = USDHC_PROT_CTRL_RWCTL_MASK, /*!< Read wait control. */ + kUSDHC_InterruptAtBlockGapFlag = USDHC_PROT_CTRL_IABG_MASK, /*!< Interrupt at block gap. */ + kUSDHC_ReadDoneNo8CLK = USDHC_PROT_CTRL_RD_DONE_NO_8CLK_MASK, /*!< Read done without 8 clk for block gap. */ + kUSDHC_ExactBlockNumberReadFlag = USDHC_PROT_CTRL_NON_EXACT_BLK_RD_MASK, /*!< Exact block number read. */ +}; + +/*! @brief MMC card boot mode */ +typedef enum _usdhc_boot_mode +{ + kUSDHC_BootModeNormal = 0U, /*!< Normal boot */ + kUSDHC_BootModeAlternative = 1U, /*!< Alternative boot */ +} usdhc_boot_mode_t; + +/*! @brief The command type */ +typedef enum _usdhc_card_command_type +{ + kCARD_CommandTypeNormal = 0U, /*!< Normal command */ + kCARD_CommandTypeSuspend = 1U, /*!< Suspend command */ + kCARD_CommandTypeResume = 2U, /*!< Resume command */ + kCARD_CommandTypeAbort = 3U, /*!< Abort command */ + kCARD_CommandTypeEmpty = 4U, /*!< Empty command */ +} usdhc_card_command_type_t; + +/*! + * @brief The command response type. + * + * Defines the command response type from card to host controller. + */ +typedef enum _usdhc_card_response_type +{ + kCARD_ResponseTypeNone = 0U, /*!< Response type: none */ + kCARD_ResponseTypeR1 = 1U, /*!< Response type: R1 */ + kCARD_ResponseTypeR1b = 2U, /*!< Response type: R1b */ + kCARD_ResponseTypeR2 = 3U, /*!< Response type: R2 */ + kCARD_ResponseTypeR3 = 4U, /*!< Response type: R3 */ + kCARD_ResponseTypeR4 = 5U, /*!< Response type: R4 */ + kCARD_ResponseTypeR5 = 6U, /*!< Response type: R5 */ + kCARD_ResponseTypeR5b = 7U, /*!< Response type: R5b */ + kCARD_ResponseTypeR6 = 8U, /*!< Response type: R6 */ + kCARD_ResponseTypeR7 = 9U, /*!< Response type: R7 */ +} usdhc_card_response_type_t; + +/*! @brief The alignment size for ADDRESS filed in ADMA1's descriptor. */ +#define USDHC_ADMA1_ADDRESS_ALIGN (4096U) +/*! @brief The alignment size for LENGTH field in ADMA1's descriptor. */ +#define USDHC_ADMA1_LENGTH_ALIGN (4096U) +/*! @brief The alignment size for ADDRESS field in ADMA2's descriptor. */ +#define USDHC_ADMA2_ADDRESS_ALIGN (4U) +/*! @brief The alignment size for LENGTH filed in ADMA2's descriptor. */ +#define USDHC_ADMA2_LENGTH_ALIGN (4U) + +/* ADMA1 descriptor table: + * |------------------------|---------|--------------------------| + * | Address/page field |Reserved | Attribute | + * |------------------------|---------|--------------------------| + * |31 12|11 6|05 |04 |03|02 |01 |00 | + * |------------------------|---------|----|----|--|---|---|-----| + * | address or data length | 000000 |Act2|Act1| 0|Int|End|Valid| + * |------------------------|---------|----|----|--|---|---|-----| + * + * ADMA2 action table: + * |------|------|-----------------|-------|-------------| + * | Act2 | Act1 | Comment | 31-28 | 27 - 12 | + * |------|------|-----------------|---------------------| + * | 0 | 0 | No op | Don't care | + * |------|------|-----------------|-------|-------------| + * | 0 | 1 | Set data length | 0000 | Data Length | + * |------|------|-----------------|-------|-------------| + * | 1 | 0 | Transfer data | Data address | + * |------|------|-----------------|---------------------| + * | 1 | 1 | Link descriptor | Descriptor address | + * |------|------|-----------------|---------------------| + */ +/****************************tables below are created only for Doxygen*********************************/ +/*! @brief The bit shift for ADDRESS filed in ADMA1's descriptor. + * <table> + * <caption>ADMA1 descriptor table</caption> + * <tr><th>Address/page field <th>Reserved <th colspan="6">Attribute + * <tr><td>31 12 <td>11 6 <td>05 <td>04 <td>03 <td>02 <td>01 <td>00 + * <tr><td>address or data length <td>000000 <td>Act2 <td>Act1 <td>0 <td>Int <td>End <td>Valid + * </table> + * + * <table> + * <caption>ADMA2 action</caption> + * <tr><th>Act2 <th>Act1 <th>Comment <th>31-28 <th>27-12 + * <tr><td>0 <td>0 <td>No op <td colspan="2">Don't care + * <tr><td>0 <td>1 <td>Set data length <td>0000 <td> Data Length + * <tr><td>1 <td>0 <td>Transfer data <td colspan="2">Data address + * <tr><td>1 <td>1 <td>Link descriptor <td colspan="2">Descriptor address + * </table> + */ +#define USDHC_ADMA1_DESCRIPTOR_ADDRESS_SHIFT (12U) +/*! @brief The bit mask for ADDRESS field in ADMA1's descriptor. */ +#define USDHC_ADMA1_DESCRIPTOR_ADDRESS_MASK (0xFFFFFU) +/*! @brief The bit shift for LENGTH filed in ADMA1's descriptor. */ +#define USDHC_ADMA1_DESCRIPTOR_LENGTH_SHIFT (12U) +/*! @brief The mask for LENGTH field in ADMA1's descriptor. */ +#define USDHC_ADMA1_DESCRIPTOR_LENGTH_MASK (0xFFFFU) +/*! @brief The maximum value of LENGTH filed in ADMA1's descriptor. + * Since the max transfer size ADMA1 support is 65535 which is indivisible by + * 4096, so to make sure a large data load transfer (>64KB) continuously (require the data + * address be always align with 4096), software will set the maximum data length + * for ADMA1 to (64 - 4)KB. + */ +#define USDHC_ADMA1_DESCRIPTOR_MAX_LENGTH_PER_ENTRY (USDHC_ADMA1_DESCRIPTOR_LENGTH_MASK + 1U - 4096U) + +/*! @brief Enum _usdhc_adma1_descriptor_flag. The mask for the control/status field in ADMA1 descriptor. */ +enum +{ + kUSDHC_Adma1DescriptorValidFlag = (1U << 0U), /*!< Valid flag. */ + kUSDHC_Adma1DescriptorEndFlag = (1U << 1U), /*!< End flag. */ + kUSDHC_Adma1DescriptorInterrupFlag = (1U << 2U), /*!< Interrupt flag. */ + kUSDHC_Adma1DescriptorActivity1Flag = (1U << 4U), /*!< Activity 1 flag. */ + kUSDHC_Adma1DescriptorActivity2Flag = (1U << 5U), /*!< Activity 2 flag. */ + kUSDHC_Adma1DescriptorTypeNop = (kUSDHC_Adma1DescriptorValidFlag), /*!< No operation. */ + kUSDHC_Adma1DescriptorTypeTransfer = (kUSDHC_Adma1DescriptorActivity2Flag | kUSDHC_Adma1DescriptorValidFlag), + /*!< Transfer data. */ + kUSDHC_Adma1DescriptorTypeLink = (kUSDHC_Adma1DescriptorActivity1Flag | kUSDHC_Adma1DescriptorActivity2Flag | + kUSDHC_Adma1DescriptorValidFlag), /*!< Link descriptor. */ + kUSDHC_Adma1DescriptorTypeSetLength = (kUSDHC_Adma1DescriptorActivity1Flag | kUSDHC_Adma1DescriptorValidFlag), + /*!< Set data length. */ +}; + +/* ADMA2 descriptor table: + * |----------------|---------------|-------------|--------------------------| + * | Address field | Length | Reserved | Attribute | + * |----------------|---------------|-------------|--------------------------| + * |63 32|31 16|15 06|05 |04 |03|02 |01 |00 | + * |----------------|---------------|-------------|----|----|--|---|---|-----| + * | 32-bit address | 16-bit length | 0000000000 |Act2|Act1| 0|Int|End|Valid| + * |----------------|---------------|-------------|----|----|--|---|---|-----| + * + * ADMA2 action table: + * | Act2 | Act1 | Comment | Operation | + * |------|------|-----------------|-------------------------------------------------------------------| + * | 0 | 0 | No op | Don't care | + * |------|------|-----------------|-------------------------------------------------------------------| + * | 0 | 1 | Reserved | Read this line and go to next one | + * |------|------|-----------------|-------------------------------------------------------------------| + * | 1 | 0 | Transfer data | Transfer data with address and length set in this descriptor line | + * |------|------|-----------------|-------------------------------------------------------------------| + * | 1 | 1 | Link descriptor | Link to another descriptor | + * |------|------|-----------------|-------------------------------------------------------------------| + */ +/**********************************tables below are created only for Doxygen***********************************/ +/*! @brief The bit shift for LENGTH field in ADMA2's descriptor. + * + * <table> + * <caption>ADMA2 descriptor table</caption> + * <tr><th>Address field <th>Length <th>Reserved <th colspan="6">Attribute + * <tr><td>63 32 <td>31 16 <td>15 06 <td>05 <td>04 <td>03 <td>02 <td>01 <td>00 + * <tr><td>32-bit address <td>16-bit length <td>0000000000 <td>Act2 <td>Act1 <td>0 <td>Int <td>End <td>Valid + *</table> + * + * <table> + * <caption>ADMA2 action</caption> + * <tr><th>Act2 <th>Act1 <th>Comment <th>Operation + * <tr><td> 0 <td>0 <td>No op <td>Don't care + * <tr><td> 0 <td>1 <td> Reserved <td> Read this line and go to next one + * <tr><td> 1 <td>0 <td>Transfer data <td>Transfer data with address and length set in this descriptor line + * <tr><td> 1 <td>1 <td>Link descriptor <td>Link to another descriptor + * </table> + */ +#define USDHC_ADMA2_DESCRIPTOR_LENGTH_SHIFT (16U) +/*! @brief The bit mask for LENGTH field in ADMA2's descriptor. */ +#define USDHC_ADMA2_DESCRIPTOR_LENGTH_MASK (0xFFFFU) +/*! @brief The maximum value of LENGTH field in ADMA2's descriptor. */ +#define USDHC_ADMA2_DESCRIPTOR_MAX_LENGTH_PER_ENTRY (USDHC_ADMA2_DESCRIPTOR_LENGTH_MASK - 3U) + +/*! @brief Enum _usdhc_adma2_descriptor_flag. ADMA1 descriptor control and status mask. */ +enum +{ + kUSDHC_Adma2DescriptorValidFlag = (1U << 0U), /*!< Valid flag. */ + kUSDHC_Adma2DescriptorEndFlag = (1U << 1U), /*!< End flag. */ + kUSDHC_Adma2DescriptorInterruptFlag = (1U << 2U), /*!< Interrupt flag. */ + kUSDHC_Adma2DescriptorActivity1Flag = (1U << 4U), /*!< Activity 1 mask. */ + kUSDHC_Adma2DescriptorActivity2Flag = (1U << 5U), /*!< Activity 2 mask. */ + + kUSDHC_Adma2DescriptorTypeNop = (kUSDHC_Adma2DescriptorValidFlag), /*!< No operation. */ + kUSDHC_Adma2DescriptorTypeReserved = (kUSDHC_Adma2DescriptorActivity1Flag | kUSDHC_Adma2DescriptorValidFlag), + /*!< Reserved. */ + kUSDHC_Adma2DescriptorTypeTransfer = (kUSDHC_Adma2DescriptorActivity2Flag | kUSDHC_Adma2DescriptorValidFlag), + /*!< Transfer type. */ + kUSDHC_Adma2DescriptorTypeLink = (kUSDHC_Adma2DescriptorActivity1Flag | kUSDHC_Adma2DescriptorActivity2Flag | + kUSDHC_Adma2DescriptorValidFlag), /*!< Link type. */ +}; + +/*! @brief Enum _usdhc_adma_flag. ADMA descriptor configuration flag. + * @anchor _usdhc_adma_flag + */ +enum +{ + kUSDHC_AdmaDescriptorSingleFlag = 0U, + /*!< Try to finish the transfer in a single ADMA descriptor. If transfer size is bigger than one + ADMA descriptor's ability, new another descriptor for data transfer. */ + kUSDHC_AdmaDescriptorMultipleFlag = + 1U, /*!< Create multiple ADMA descriptors within the ADMA table, this is used for + mmc boot mode specifically, which need + to modify the ADMA descriptor on the fly, so the flag should be used + combining with stop at block gap feature. */ +}; + +/*! @brief DMA transfer burst len config. */ +typedef enum _usdhc_burst_len +{ + kUSDHC_EnBurstLenForINCR = 0x01U, /*!< Enable burst len for INCR. */ + kUSDHC_EnBurstLenForINCR4816 = 0x02U, /*!< Enable burst len for INCR4/INCR8/INCR16. */ + kUSDHC_EnBurstLenForINCR4816WRAP = 0x04U, /*!< Enable burst len for INCR4/8/16 WRAP. */ +} usdhc_burst_len_t; + +/*! @brief Enum _usdhc_transfer_data_type. Tansfer data type definition. */ +enum +{ + kUSDHC_TransferDataNormal = 0U, /*!< Transfer normal read/write data. */ + kUSDHC_TransferDataTuning = 1U, /*!< Transfer tuning data. */ + kUSDHC_TransferDataBoot = 2U, /*!< Transfer boot data. */ + kUSDHC_TransferDataBootcontinous = 3U, /*!< Transfer boot data continuously. */ +}; + +/*! @brief Defines the ADMA1 descriptor structure. */ +typedef uint32_t usdhc_adma1_descriptor_t; + +/*! @brief Defines the ADMA2 descriptor structure. */ +typedef struct _usdhc_adma2_descriptor +{ + uint32_t attribute; /*!< The control and status field. */ + const uint32_t *address; /*!< The address field. */ +} usdhc_adma2_descriptor_t; + +/*! + * @brief USDHC capability information. + * + * Defines a structure to save the capability information of USDHC. + */ +typedef struct _usdhc_capability +{ + uint32_t sdVersion; /*!< Support SD card/sdio version. */ + uint32_t mmcVersion; /*!< Support EMMC card version. */ + uint32_t maxBlockLength; /*!< Maximum block length united as byte. */ + uint32_t maxBlockCount; /*!< Maximum block count can be set one time. */ + uint32_t flags; /*!< Capability flags to indicate the support information(@ref _usdhc_capability_flag). */ +} usdhc_capability_t; + +/*! @brief Data structure to configure the MMC boot feature. */ +typedef struct _usdhc_boot_config +{ + uint32_t ackTimeoutCount; /*!< Timeout value for the boot ACK. The available range is 0 ~ 15. */ + usdhc_boot_mode_t bootMode; /*!< Boot mode selection. */ + uint32_t blockCount; /*!< Stop at block gap value of automatic mode. Available range is 0 ~ 65535. */ + size_t blockSize; /*!< Block size. */ + bool enableBootAck; /*!< Enable or disable boot ACK. */ + bool enableAutoStopAtBlockGap; /*!< Enable or disable auto stop at block gap function in boot period. */ +} usdhc_boot_config_t; + +/*! @brief Data structure to initialize the USDHC. */ +typedef struct _usdhc_config +{ + uint32_t dataTimeout; /*!< Data timeout value. */ + usdhc_endian_mode_t endianMode; /*!< Endian mode. */ + uint8_t readWatermarkLevel; /*!< Watermark level for DMA read operation. Available range is 1 ~ 128. */ + uint8_t writeWatermarkLevel; /*!< Watermark level for DMA write operation. Available range is 1 ~ 128. */ +#if !(defined(FSL_FEATURE_USDHC_HAS_NO_RW_BURST_LEN) && FSL_FEATURE_USDHC_HAS_NO_RW_BURST_LEN) + uint8_t readBurstLen; /*!< Read burst len. */ + uint8_t writeBurstLen; /*!< Write burst len. */ +#endif +} usdhc_config_t; + +/*! + * @brief Card command descriptor. + * + * Defines card command-related attribute. + */ +typedef struct _usdhc_command +{ + uint32_t index; /*!< Command index. */ + uint32_t argument; /*!< Command argument. */ + usdhc_card_command_type_t type; /*!< Command type. */ + usdhc_card_response_type_t responseType; /*!< Command response type. */ + uint32_t response[4U]; /*!< Response for this command. */ + uint32_t responseErrorFlags; /*!< Response error flag, which need to check + the command reponse. */ + uint32_t flags; /*!< Cmd flags. */ +} usdhc_command_t; + +/*! @brief ADMA configuration. */ +typedef struct _usdhc_adma_config +{ + usdhc_dma_mode_t dmaMode; /*!< DMA mode. */ +#if !(defined(FSL_FEATURE_USDHC_HAS_NO_RW_BURST_LEN) && FSL_FEATURE_USDHC_HAS_NO_RW_BURST_LEN) + usdhc_burst_len_t burstLen; /*!< Burst len config. */ +#endif + uint32_t *admaTable; /*!< ADMA table address, can't be null if transfer way is ADMA1/ADMA2. */ + uint32_t admaTableWords; /*!< ADMA table length united as words, can't be 0 if transfer way is ADMA1/ADMA2. */ +} usdhc_adma_config_t; + +/*! + * @brief Card scatter gather data list. + * + * Allow application register uncontinuous data buffer for data transfer. + */ +typedef struct _usdhc_scatter_gather_data_list +{ + uint32_t *dataAddr; + uint32_t dataSize; + struct _usdhc_scatter_gather_data_list *dataList; +} usdhc_scatter_gather_data_list_t; + +/*! + * @brief Card scatter gather data descriptor. + * + * Defines a structure to contain data-related attribute. The 'enableIgnoreError' is used when upper card + * driver wants to ignore the error event to read/write all the data and not to stop read/write immediately when an + * error event happens. For example, bus testing procedure for MMC card. + */ +typedef struct _usdhc_scatter_gather_data +{ + bool enableAutoCommand12; /*!< Enable auto CMD12. */ + bool enableAutoCommand23; /*!< Enable auto CMD23. */ + bool enableIgnoreError; /*!< Enable to ignore error event to read/write all the data. */ + + usdhc_transfer_direction_t dataDirection; /*!< data direction */ + uint8_t dataType; /*!< this is used to distinguish the normal/tuning/boot data. */ + size_t blockSize; /*!< Block size. */ + + usdhc_scatter_gather_data_list_t sgData; /*!< scatter gather data */ +} usdhc_scatter_gather_data_t; + +/*! @brief usdhc scatter gather transfer. */ +typedef struct _usdhc_scatter_gather_transfer +{ + usdhc_scatter_gather_data_t *data; /*!< Data to transfer. */ + usdhc_command_t *command; /*!< Command to send. */ +} usdhc_scatter_gather_transfer_t; + +/*! + * @brief Card data descriptor. + * + * Defines a structure to contain data-related attribute. The 'enableIgnoreError' is used when upper card + * driver wants to ignore the error event to read/write all the data and not to stop read/write immediately when an + * error event happens. For example, bus testing procedure for MMC card. + */ +typedef struct _usdhc_data +{ + bool enableAutoCommand12; /*!< Enable auto CMD12. */ + bool enableAutoCommand23; /*!< Enable auto CMD23. */ + bool enableIgnoreError; /*!< Enable to ignore error event to read/write all the data. */ + uint8_t dataType; /*!< this is used to distinguish the normal/tuning/boot data. */ + size_t blockSize; /*!< Block size. */ + uint32_t blockCount; /*!< Block count. */ + uint32_t *rxData; /*!< Buffer to save data read. */ + const uint32_t *txData; /*!< Data buffer to write. */ +} usdhc_data_t; + +/*! @brief Transfer state. */ +typedef struct _usdhc_transfer +{ + usdhc_data_t *data; /*!< Data to transfer. */ + usdhc_command_t *command; /*!< Command to send. */ +} usdhc_transfer_t; + +/*! @brief USDHC handle typedef. */ +typedef struct _usdhc_handle usdhc_handle_t; + +/*! @brief USDHC callback functions. */ +typedef struct _usdhc_transfer_callback +{ + void (*CardInserted)(USDHC_Type *base, + void *userData); /*!< Card inserted occurs when DAT3/CD pin is for card detect */ + void (*CardRemoved)(USDHC_Type *base, void *userData); /*!< Card removed occurs */ + void (*SdioInterrupt)(USDHC_Type *base, void *userData); /*!< SDIO card interrupt occurs */ + void (*BlockGap)(USDHC_Type *base, void *userData); /*!< stopped at block gap event */ + void (*TransferComplete)(USDHC_Type *base, + usdhc_handle_t *handle, + status_t status, + void *userData); /*!< Transfer complete callback. */ + void (*ReTuning)(USDHC_Type *base, void *userData); /*!< Handle the re-tuning. */ +} usdhc_transfer_callback_t; + +/*! + * @brief USDHC handle. + * + * Defines the structure to save the USDHC state information and callback function. + * + * @note All the fields except interruptFlags and transferredWords must be allocated by the user. + */ +struct _usdhc_handle +{ +#if (defined FSL_USDHC_ENABLE_SCATTER_GATHER_TRANSFER) && FSL_USDHC_ENABLE_SCATTER_GATHER_TRANSFER + usdhc_scatter_gather_data_t *volatile data; /*!< scatter gather data pointer */ +#else + usdhc_data_t *volatile data; /*!< Transfer parameter. Data to transfer. */ +#endif + usdhc_command_t *volatile command; /*!< Transfer parameter. Command to send. */ + + volatile uint32_t transferredWords; /*!< Transfer status. Words transferred by DATAPORT way. */ + + usdhc_transfer_callback_t callback; /*!< Callback function. */ + void *userData; /*!< Parameter for transfer complete callback. */ +}; + +/*! @brief USDHC transfer function. */ +typedef status_t (*usdhc_transfer_function_t)(USDHC_Type *base, usdhc_transfer_t *content); + +/*! @brief USDHC host descriptor. */ +typedef struct _usdhc_host +{ + USDHC_Type *base; /*!< USDHC peripheral base address. */ + uint32_t sourceClock_Hz; /*!< USDHC source clock frequency united in Hz. */ + usdhc_config_t config; /*!< USDHC configuration. */ + usdhc_capability_t capability; /*!< USDHC capability information. */ + usdhc_transfer_function_t transfer; /*!< USDHC transfer function. */ +} usdhc_host_t; + +/************************************************************************************************* + * API + ************************************************************************************************/ +#if defined(__cplusplus) +extern "C" { +#endif + +/*! + * @name Initialization and deinitialization + * @{ + */ + +/*! + * @brief USDHC module initialization function. + * + * Configures the USDHC according to the user configuration. + * + * Example: + @code + usdhc_config_t config; + config.cardDetectDat3 = false; + config.endianMode = kUSDHC_EndianModeLittle; + config.dmaMode = kUSDHC_DmaModeAdma2; + config.readWatermarkLevel = 128U; + config.writeWatermarkLevel = 128U; + USDHC_Init(USDHC, &config); + @endcode + * + * @param base USDHC peripheral base address. + * @param config USDHC configuration information. + * @retval #kStatus_Success Operate successfully. + */ +void USDHC_Init(USDHC_Type *base, const usdhc_config_t *config); + +/*! + * @brief Deinitializes the USDHC. + * + * @param base USDHC peripheral base address. + */ +void USDHC_Deinit(USDHC_Type *base); + +/*! + * @brief Resets the USDHC. + * + * @param base USDHC peripheral base address. + * @param mask The reset type mask(@ref _usdhc_reset). + * @param timeout Timeout for reset. + * @retval true Reset successfully. + * @retval false Reset failed. + */ +bool USDHC_Reset(USDHC_Type *base, uint32_t mask, uint32_t timeout); + +/* @} */ + +/*! + * @name DMA Control + * @{ + */ + +/*! + * @brief Sets the DMA descriptor table configuration. + * A high level DMA descriptor configuration function. + * @param base USDHC peripheral base address. + * @param dmaConfig ADMA configuration + * @param dataConfig Data descriptor + * @param flags ADAM descriptor flag, used to indicate to create multiple or single descriptor, please + * refer to enum @ref _usdhc_adma_flag. + * @retval #kStatus_OutOfRange ADMA descriptor table length isn't enough to describe data. + * @retval #kStatus_Success Operate successfully. + */ +status_t USDHC_SetAdmaTableConfig(USDHC_Type *base, + usdhc_adma_config_t *dmaConfig, + usdhc_data_t *dataConfig, + uint32_t flags); + +/*! + * @brief Internal DMA configuration. + * This function is used to config the USDHC DMA related registers. + * @param base USDHC peripheral base address. + * @param dmaConfig ADMA configuration. + * @param dataAddr Transfer data address, a simple DMA parameter, if ADMA is used, leave it to NULL. + * @param enAutoCmd23 Flag to indicate Auto CMD23 is enable or not, a simple DMA parameter, if ADMA is used, leave it + * to false. + * @retval #kStatus_OutOfRange ADMA descriptor table length isn't enough to describe data. + * @retval #kStatus_Success Operate successfully. + */ +status_t USDHC_SetInternalDmaConfig(USDHC_Type *base, + usdhc_adma_config_t *dmaConfig, + const uint32_t *dataAddr, + bool enAutoCmd23); + +/*! + * @brief Sets the ADMA2 descriptor table configuration. + * + * @param admaTable ADMA table address. + * @param admaTableWords ADMA table length. + * @param dataBufferAddr Data buffer address. + * @param dataBytes Data Data length. + * @param flags ADAM descriptor flag, used to indicate to create multiple or single descriptor, please + * refer to enum @ref _usdhc_adma_flag. + * @retval #kStatus_OutOfRange ADMA descriptor table length isn't enough to describe data. + * @retval #kStatus_Success Operate successfully. + */ +status_t USDHC_SetADMA2Descriptor( + uint32_t *admaTable, uint32_t admaTableWords, const uint32_t *dataBufferAddr, uint32_t dataBytes, uint32_t flags); + +/*! + * @brief Sets the ADMA1 descriptor table configuration. + * + * @param admaTable ADMA table address. + * @param admaTableWords ADMA table length. + * @param dataBufferAddr Data buffer address. + * @param dataBytes Data length. + * @param flags ADAM descriptor flag, used to indicate to create multiple or single descriptor, please + * refer to enum @ref _usdhc_adma_flag. + * @retval #kStatus_OutOfRange ADMA descriptor table length isn't enough to describe data. + * @retval #kStatus_Success Operate successfully. + */ +status_t USDHC_SetADMA1Descriptor( + uint32_t *admaTable, uint32_t admaTableWords, const uint32_t *dataBufferAddr, uint32_t dataBytes, uint32_t flags); + +/*! + * @brief Enables internal DMA. + * + * @param base USDHC peripheral base address. + * @param enable enable or disable flag + */ +static inline void USDHC_EnableInternalDMA(USDHC_Type *base, bool enable) +{ + if (enable) + { + base->MIX_CTRL |= USDHC_MIX_CTRL_DMAEN_MASK; + } + else + { + base->MIX_CTRL &= ~USDHC_MIX_CTRL_DMAEN_MASK; + base->PROT_CTRL &= ~USDHC_PROT_CTRL_DMASEL_MASK; + } +} + +/* @} */ + +/*! + * @name Interrupts + * @{ + */ + +/*! + * @brief Enables the interrupt status. + * + * @param base USDHC peripheral base address. + * @param mask Interrupt status flags mask(@ref _usdhc_interrupt_status_flag). + */ +static inline void USDHC_EnableInterruptStatus(USDHC_Type *base, uint32_t mask) +{ + base->INT_STATUS_EN |= mask; +} + +/*! + * @brief Disables the interrupt status. + * + * @param base USDHC peripheral base address. + * @param mask The interrupt status flags mask(@ref _usdhc_interrupt_status_flag). + */ +static inline void USDHC_DisableInterruptStatus(USDHC_Type *base, uint32_t mask) +{ + base->INT_STATUS_EN &= ~mask; +} + +/*! + * @brief Enables the interrupt signal corresponding to the interrupt status flag. + * + * @param base USDHC peripheral base address. + * @param mask The interrupt status flags mask(@ref _usdhc_interrupt_status_flag). + */ +static inline void USDHC_EnableInterruptSignal(USDHC_Type *base, uint32_t mask) +{ + base->INT_SIGNAL_EN |= mask; +} + +/*! + * @brief Disables the interrupt signal corresponding to the interrupt status flag. + * + * @param base USDHC peripheral base address. + * @param mask The interrupt status flags mask(@ref _usdhc_interrupt_status_flag). + */ +static inline void USDHC_DisableInterruptSignal(USDHC_Type *base, uint32_t mask) +{ + base->INT_SIGNAL_EN &= ~mask; +} + +/* @} */ + +/*! + * @name Status + * @{ + */ + +/*! + * @brief Gets the enabled interrupt status. + * + * @param base USDHC peripheral base address. + * @return Current interrupt status flags mask(@ref _usdhc_interrupt_status_flag). + */ +static inline uint32_t USDHC_GetEnabledInterruptStatusFlags(USDHC_Type *base) +{ + uint32_t intStatus = base->INT_STATUS; + + return intStatus & base->INT_SIGNAL_EN; +} + +/*! + * @brief Gets the current interrupt status. + * + * @param base USDHC peripheral base address. + * @return Current interrupt status flags mask(@ref _usdhc_interrupt_status_flag). + */ +static inline uint32_t USDHC_GetInterruptStatusFlags(USDHC_Type *base) +{ + return base->INT_STATUS; +} + +/*! + * @brief Clears a specified interrupt status. + * write 1 clears + * @param base USDHC peripheral base address. + * @param mask The interrupt status flags mask(@ref _usdhc_interrupt_status_flag). + */ +static inline void USDHC_ClearInterruptStatusFlags(USDHC_Type *base, uint32_t mask) +{ + base->INT_STATUS = mask; +} + +/*! + * @brief Gets the status of auto command 12 error. + * + * @param base USDHC peripheral base address. + * @return Auto command 12 error status flags mask(@ref _usdhc_auto_command12_error_status_flag). + */ +static inline uint32_t USDHC_GetAutoCommand12ErrorStatusFlags(USDHC_Type *base) +{ + return base->AUTOCMD12_ERR_STATUS; +} + +/*! + * @brief Gets the status of the ADMA error. + * + * @param base USDHC peripheral base address. + * @return ADMA error status flags mask(@ref _usdhc_adma_error_status_flag). + */ +static inline uint32_t USDHC_GetAdmaErrorStatusFlags(USDHC_Type *base) +{ + return base->ADMA_ERR_STATUS & 0xFUL; +} + +/*! + * @brief Gets a present status. + * + * This function gets the present USDHC's status except for an interrupt status and an error status. + * + * @param base USDHC peripheral base address. + * @return Present USDHC's status flags mask(@ref _usdhc_present_status_flag). + */ +static inline uint32_t USDHC_GetPresentStatusFlags(USDHC_Type *base) +{ + return base->PRES_STATE; +} + +/* @} */ + +/*! + * @name Bus Operations + * @{ + */ + +/*! + * @brief Gets the capability information. + * + * @param base USDHC peripheral base address. + * @param capability Structure to save capability information. + */ +void USDHC_GetCapability(USDHC_Type *base, usdhc_capability_t *capability); + +/*! + * @brief Forces the card clock on. + * + * @param base USDHC peripheral base address. + * @param enable enable/disable flag + */ +static inline void USDHC_ForceClockOn(USDHC_Type *base, bool enable) +{ + if (enable) + { + base->VEND_SPEC |= USDHC_VEND_SPEC_FRC_SDCLK_ON_MASK; + } + else + { + base->VEND_SPEC &= ~USDHC_VEND_SPEC_FRC_SDCLK_ON_MASK; + } +} + +/*! + * @brief Sets the SD bus clock frequency. + * + * @param base USDHC peripheral base address. + * @param srcClock_Hz USDHC source clock frequency united in Hz. + * @param busClock_Hz SD bus clock frequency united in Hz. + * + * @return The nearest frequency of busClock_Hz configured for SD bus. + */ +uint32_t USDHC_SetSdClock(USDHC_Type *base, uint32_t srcClock_Hz, uint32_t busClock_Hz); + +/*! + * @brief Sends 80 clocks to the card to set it to the active state. + * + * This function must be called each time the card is inserted to ensure that the card can receive the command + * correctly. + * + * @param base USDHC peripheral base address. + * @param timeout Timeout to initialize card. + * @retval true Set card active successfully. + * @retval false Set card active failed. + */ +bool USDHC_SetCardActive(USDHC_Type *base, uint32_t timeout); + +/*! + * @brief Triggers a hardware reset. + * + * @param base USDHC peripheral base address. + * @param high 1 or 0 level + */ +static inline void USDHC_AssertHardwareReset(USDHC_Type *base, bool high) +{ + if (high) + { + base->SYS_CTRL |= USDHC_SYS_CTRL_IPP_RST_N_MASK; + } + else + { + base->SYS_CTRL &= ~USDHC_SYS_CTRL_IPP_RST_N_MASK; + } +} + +/*! + * @brief Sets the data transfer width. + * + * @param base USDHC peripheral base address. + * @param width Data transfer width. + */ +static inline void USDHC_SetDataBusWidth(USDHC_Type *base, usdhc_data_bus_width_t width) +{ + base->PROT_CTRL = ((base->PROT_CTRL & ~USDHC_PROT_CTRL_DTW_MASK) | USDHC_PROT_CTRL_DTW(width)); +} + +/*! + * @brief Fills the data port. + * + * This function is used to implement the data transfer by Data Port instead of DMA. + * + * @param base USDHC peripheral base address. + * @param data The data about to be sent. + */ +static inline void USDHC_WriteData(USDHC_Type *base, uint32_t data) +{ + base->DATA_BUFF_ACC_PORT = data; +} + +/*! + * @brief Retrieves the data from the data port. + * + * This function is used to implement the data transfer by Data Port instead of DMA. + * + * @param base USDHC peripheral base address. + * @return The data has been read. + */ +static inline uint32_t USDHC_ReadData(USDHC_Type *base) +{ + return base->DATA_BUFF_ACC_PORT; +} + +/*! + * @brief Sends command function. + * + * @param base USDHC peripheral base address. + * @param command configuration + */ +void USDHC_SendCommand(USDHC_Type *base, usdhc_command_t *command); + +/*! + * @brief Enables or disables a wakeup event in low-power mode. + * + * @param base USDHC peripheral base address. + * @param mask Wakeup events mask(@ref _usdhc_wakeup_event). + * @param enable True to enable, false to disable. + */ +static inline void USDHC_EnableWakeupEvent(USDHC_Type *base, uint32_t mask, bool enable) +{ + if (enable) + { + base->PROT_CTRL |= mask; + } + else + { + base->PROT_CTRL &= ~mask; + } +} + +/*! + * @brief Detects card insert status. + * + * @param base USDHC peripheral base address. + * @param enable enable/disable flag + */ +static inline void USDHC_CardDetectByData3(USDHC_Type *base, bool enable) +{ + if (enable) + { + base->PROT_CTRL |= USDHC_PROT_CTRL_D3CD_MASK; + } + else + { + base->PROT_CTRL &= ~USDHC_PROT_CTRL_D3CD_MASK; + } +} + +/*! + * @brief Detects card insert status. + * + * @param base USDHC peripheral base address. + */ +static inline bool USDHC_DetectCardInsert(USDHC_Type *base) +{ + return ((base->PRES_STATE & (uint32_t)kUSDHC_CardInsertedFlag) != 0UL) ? true : false; +} + +/*! + * @brief Enables or disables the SDIO card control. + * + * @param base USDHC peripheral base address. + * @param mask SDIO card control flags mask(@ref _usdhc_sdio_control_flag). + * @param enable True to enable, false to disable. + */ +static inline void USDHC_EnableSdioControl(USDHC_Type *base, uint32_t mask, bool enable) +{ + if (enable) + { + base->PROT_CTRL |= mask; + } + else + { + base->PROT_CTRL &= ~mask; + } +} + +/*! + * @brief Restarts a transaction which has stopped at the block GAP for the SDIO card. + * + * @param base USDHC peripheral base address. + */ +static inline void USDHC_SetContinueRequest(USDHC_Type *base) +{ + base->PROT_CTRL |= USDHC_PROT_CTRL_CREQ_MASK; +} + +/*! + * @brief Request stop at block gap function. + * + * @param base USDHC peripheral base address. + * @param enable True to stop at block gap, false to normal transfer. + */ +static inline void USDHC_RequestStopAtBlockGap(USDHC_Type *base, bool enable) +{ + if (enable) + { + base->PROT_CTRL |= USDHC_PROT_CTRL_SABGREQ_MASK; + } + else + { + base->PROT_CTRL &= ~USDHC_PROT_CTRL_SABGREQ_MASK; + } +} + +/*! + * @brief Configures the MMC boot feature. + * + * Example: + @code + usdhc_boot_config_t config; + config.ackTimeoutCount = 4; + config.bootMode = kUSDHC_BootModeNormal; + config.blockCount = 5; + config.enableBootAck = true; + config.enableBoot = true; + config.enableAutoStopAtBlockGap = true; + USDHC_SetMmcBootConfig(USDHC, &config); + @endcode + * + * @param base USDHC peripheral base address. + * @param config The MMC boot configuration information. + */ +void USDHC_SetMmcBootConfig(USDHC_Type *base, const usdhc_boot_config_t *config); + +/*! + * @brief Enables or disables the mmc boot mode. + * + * @param base USDHC peripheral base address. + * @param enable True to enable, false to disable. + */ +static inline void USDHC_EnableMmcBoot(USDHC_Type *base, bool enable) +{ + if (enable) + { + base->MMC_BOOT |= USDHC_MMC_BOOT_BOOT_EN_MASK; + } + else + { + base->MMC_BOOT &= ~USDHC_MMC_BOOT_BOOT_EN_MASK; + } +} + +/*! + * @brief Forces generating events according to the given mask. + * + * @param base USDHC peripheral base address. + * @param mask The force events bit posistion (_usdhc_force_event). + */ +static inline void USDHC_SetForceEvent(USDHC_Type *base, uint32_t mask) +{ + base->FORCE_EVENT = mask; +} + +#if !(defined(FSL_FEATURE_USDHC_HAS_NO_VOLTAGE_SELECT) && (FSL_FEATURE_USDHC_HAS_NO_VOLTAGE_SELECT)) +/*! + * @brief Selects the USDHC output voltage. + * + * @param base USDHC peripheral base address. + * @param en18v True means 1.8V, false means 3.0V. + */ +static inline void UDSHC_SelectVoltage(USDHC_Type *base, bool en18v) +{ + if (en18v) + { + base->VEND_SPEC |= USDHC_VEND_SPEC_VSELECT_MASK; + } + else + { + base->VEND_SPEC &= ~USDHC_VEND_SPEC_VSELECT_MASK; + } +} +#endif + +#if defined(FSL_FEATURE_USDHC_HAS_SDR50_MODE) && (FSL_FEATURE_USDHC_HAS_SDR50_MODE) +/*! + * @brief Checks the SDR50 mode request tuning bit. + * When this bit set, application shall perform tuning for SDR50 mode. + * @param base USDHC peripheral base address. + */ +static inline bool USDHC_RequestTuningForSDR50(USDHC_Type *base) +{ + return ((base->HOST_CTRL_CAP & USDHC_HOST_CTRL_CAP_USE_TUNING_SDR50_MASK) != 0UL) ? true : false; +} + +/*! + * @brief Checks the request re-tuning bit. + * When this bit is set, user should do manual tuning or standard tuning function. + * @param base USDHC peripheral base address. + */ +static inline bool USDHC_RequestReTuning(USDHC_Type *base) +{ + return ((base->PRES_STATE & USDHC_PRES_STATE_RTR_MASK) != 0UL) ? true : false; +} + +/*! + * @brief The SDR104 mode auto tuning enable and disable. + * This function should be called after tuning function execute pass, auto tuning will handle + * by hardware. + * @param base USDHC peripheral base address. + * @param enable enable/disable flag + */ +static inline void USDHC_EnableAutoTuning(USDHC_Type *base, bool enable) +{ + if (enable) + { + base->MIX_CTRL |= USDHC_MIX_CTRL_AUTO_TUNE_EN_MASK; + } + else + { + base->MIX_CTRL &= ~USDHC_MIX_CTRL_AUTO_TUNE_EN_MASK; + } +} + +#if !(defined(FSL_FEATURE_USDHC_REGISTER_HOST_CTRL_CAP_HAS_NO_RETUNING_TIME_COUNTER) && \ + FSL_FEATURE_USDHC_REGISTER_HOST_CTRL_CAP_HAS_NO_RETUNING_TIME_COUNTER) +/*! + * @brief Configs the re-tuning timer for mode 1 and mode 3. + * This timer is used for standard tuning auto re-tuning, + * @param base USDHC peripheral base address. + * @param counter timer counter value + */ +static inline void USDHC_SetRetuningTimer(USDHC_Type *base, uint32_t counter) +{ + base->HOST_CTRL_CAP &= ~USDHC_HOST_CTRL_CAP_TIME_COUNT_RETUNING_MASK; + base->HOST_CTRL_CAP |= USDHC_HOST_CTRL_CAP_TIME_COUNT_RETUNING(counter); +} +#endif /* FSL_FEATURE_USDHC_REGISTER_HOST_CTRL_CAP_HAS_RETUNING_TIME_COUNTER */ + +/*! + * @brief The auto tuning enbale for CMD/DATA line. + * + * @param base USDHC peripheral base address. + */ +void USDHC_EnableAutoTuningForCmdAndData(USDHC_Type *base); + +/*! + * @brief Manual tuning trigger or abort. + * User should handle the tuning cmd and find the boundary of the delay + * then calucate a average value which will be configured to the <b>CLK_TUNE_CTRL_STATUS</b> + * This function should be called before function @ref USDHC_AdjustDelayForManualTuning. + * @param base USDHC peripheral base address. + * @param enable tuning enable flag + */ +void USDHC_EnableManualTuning(USDHC_Type *base, bool enable); + +/*! + * @brief Get the tuning delay cell setting. + * + * @param base USDHC peripheral base address. + * @retval CLK Tuning Control and Status register value. + */ +static inline uint32_t USDHC_GetTuningDelayStatus(USDHC_Type *base) +{ + return base->CLK_TUNE_CTRL_STATUS >> 16U; +} + +/*! + * @brief The tuning delay cell setting. + * + * @param base USDHC peripheral base address. + * @param preDelay Set the number of delay cells on the feedback clock between the feedback clock and CLK_PRE. + * @param outDelay Set the number of delay cells on the feedback clock between CLK_PRE and CLK_OUT. + * @param postDelay Set the number of delay cells on the feedback clock between CLK_OUT and CLK_POST. + * @retval kStatus_Fail config the delay setting fail + * @retval kStatus_Success config the delay setting success + */ +status_t USDHC_SetTuningDelay(USDHC_Type *base, uint32_t preDelay, uint32_t outDelay, uint32_t postDelay); + +/*! + * @brief Adjusts delay for mannual tuning. + * @deprecated Do not use this function. It has been superceded by USDHC_SetTuingDelay + * @param base USDHC peripheral base address. + * @param delay setting configuration + * @retval #kStatus_Fail config the delay setting fail + * @retval #kStatus_Success config the delay setting success + */ +status_t USDHC_AdjustDelayForManualTuning(USDHC_Type *base, uint32_t delay); + +/*! + * @brief set tuning counter tuning. + * @param base USDHC peripheral base address. + * @param counter tuning counter + * @retval #kStatus_Fail config the delay setting fail + * @retval #kStatus_Success config the delay setting success + */ +static inline void USDHC_SetStandardTuningCounter(USDHC_Type *base, uint8_t counter) +{ + base->TUNING_CTRL = + (base->TUNING_CTRL & (~USDHC_TUNING_CTRL_TUNING_COUNTER_MASK)) | USDHC_TUNING_CTRL_TUNING_COUNTER(counter); +} + +/*! + * @brief The enable standard tuning function. + * The standard tuning window and tuning counter using the default config + * tuning cmd is sent by the software, user need to check whether the tuning result + * can be used for SDR50, SDR104, and HS200 mode tuning. + * @param base USDHC peripheral base address. + * @param tuningStartTap start tap + * @param step tuning step + * @param enable enable/disable flag + */ +void USDHC_EnableStandardTuning(USDHC_Type *base, uint32_t tuningStartTap, uint32_t step, bool enable); + +/*! + * @brief Gets execute STD tuning status. + * + * @param base USDHC peripheral base address. + */ +static inline uint32_t USDHC_GetExecuteStdTuningStatus(USDHC_Type *base) +{ + return (base->AUTOCMD12_ERR_STATUS & USDHC_AUTOCMD12_ERR_STATUS_EXECUTE_TUNING_MASK); +} + +/*! + * @brief Checks STD tuning result. + * + * @param base USDHC peripheral base address. + */ +static inline uint32_t USDHC_CheckStdTuningResult(USDHC_Type *base) +{ + return (base->AUTOCMD12_ERR_STATUS & USDHC_AUTOCMD12_ERR_STATUS_SMP_CLK_SEL_MASK); +} + +/*! + * @brief Checks tuning error. + * + * @param base USDHC peripheral base address. + */ +static inline uint32_t USDHC_CheckTuningError(USDHC_Type *base) +{ + return (base->CLK_TUNE_CTRL_STATUS & + (USDHC_CLK_TUNE_CTRL_STATUS_NXT_ERR_MASK | USDHC_CLK_TUNE_CTRL_STATUS_PRE_ERR_MASK)); +} + +#endif +/*! + * @brief The enable/disable DDR mode. + * + * @param base USDHC peripheral base address. + * @param enable enable/disable flag + * @param nibblePos nibble position + */ +void USDHC_EnableDDRMode(USDHC_Type *base, bool enable, uint32_t nibblePos); + +#if FSL_FEATURE_USDHC_HAS_HS400_MODE +/*! + * @brief The enable/disable HS400 mode. + * + * @param base USDHC peripheral base address. + * @param enable enable/disable flag + */ +static inline void USDHC_EnableHS400Mode(USDHC_Type *base, bool enable) +{ + if (enable) + { + base->MIX_CTRL |= USDHC_MIX_CTRL_HS400_MODE_MASK; + } + else + { + base->MIX_CTRL &= ~USDHC_MIX_CTRL_HS400_MODE_MASK; + } +} + +/*! + * @brief Resets the strobe DLL. + * + * @param base USDHC peripheral base address. + */ +static inline void USDHC_ResetStrobeDLL(USDHC_Type *base) +{ + base->STROBE_DLL_CTRL |= USDHC_STROBE_DLL_CTRL_STROBE_DLL_CTRL_RESET_MASK; +} + +/*! + * @brief Enables/disables the strobe DLL. + * + * @param base USDHC peripheral base address. + * @param enable enable/disable flag + */ +static inline void USDHC_EnableStrobeDLL(USDHC_Type *base, bool enable) +{ + if (enable) + { + base->STROBE_DLL_CTRL |= USDHC_STROBE_DLL_CTRL_STROBE_DLL_CTRL_ENABLE_MASK; + } + else + { + base->STROBE_DLL_CTRL &= ~USDHC_STROBE_DLL_CTRL_STROBE_DLL_CTRL_ENABLE_MASK; + } +} + +/*! + * @brief Configs the strobe DLL delay target and update interval. + * + * @param base USDHC peripheral base address. + * @param delayTarget delay target + * @param updateInterval update interval + */ +void USDHC_ConfigStrobeDLL(USDHC_Type *base, uint32_t delayTarget, uint32_t updateInterval); + +/*! + * @brief Enables manual override for slave delay chain using <b>STROBE_SLV_OVERRIDE_VAL</b>. + * + * @param base USDHC peripheral base address. + * @param delayTaps Valid delay taps range from 1 - 128 taps. A value of 0 selects tap 1, and a value of 0x7F selects + * tap 128. + */ +static inline void USDHC_SetStrobeDllOverride(USDHC_Type *base, uint32_t delayTaps) +{ + base->STROBE_DLL_CTRL &= (USDHC_STROBE_DLL_CTRL_STROBE_DLL_CTRL_ENABLE_MASK | + USDHC_STROBE_DLL_CTRL_STROBE_DLL_CTRL_SLV_OVERRIDE_VAL_MASK); + + base->STROBE_DLL_CTRL |= USDHC_STROBE_DLL_CTRL_STROBE_DLL_CTRL_SLV_OVERRIDE_MASK | + USDHC_STROBE_DLL_CTRL_STROBE_DLL_CTRL_SLV_OVERRIDE_VAL(delayTaps); +} + +/*! + * @brief Gets the strobe DLL status. + * + * @param base USDHC peripheral base address. + */ +static inline uint32_t USDHC_GetStrobeDLLStatus(USDHC_Type *base) +{ + return base->STROBE_DLL_STATUS; +} + +#endif + +/*! + * @brief USDHC data configuration. + * + * @param base USDHC peripheral base address. + * @param dataDirection Data direction, tx or rx. + * @param blockCount Data block count. + * @param blockSize Data block size. + * + */ +void USDHC_SetDataConfig(USDHC_Type *base, + usdhc_transfer_direction_t dataDirection, + uint32_t blockCount, + uint32_t blockSize); +/* @} */ + +/*! + * @name Transactional functions + * @{ + */ + +/*! + * @brief Creates the USDHC handle. + * + * @param base USDHC peripheral base address. + * @param handle USDHC handle pointer. + * @param callback Structure pointer to contain all callback functions. + * @param userData Callback function parameter. + */ +void USDHC_TransferCreateHandle(USDHC_Type *base, + usdhc_handle_t *handle, + const usdhc_transfer_callback_t *callback, + void *userData); + +#if (defined FSL_USDHC_ENABLE_SCATTER_GATHER_TRANSFER) && FSL_USDHC_ENABLE_SCATTER_GATHER_TRANSFER +/*! + * @brief Transfers the command/scatter gather data using an interrupt and an asynchronous method. + * + * This function sends a command and data and returns immediately. It doesn't wait for the transfer to complete or + * to encounter an error. The application must not call this API in multiple threads at the same time. Because of that + * this API doesn't support the re-entry mechanism. + * This function is target for the application would like to have scatter gather buffer to be transferred within one + * read/write request, non scatter gather buffer is support by this function also. + * + * @note Call API @ref USDHC_TransferCreateHandle when calling this API. + * + * @param base USDHC peripheral base address. + * @param handle USDHC handle. + * @param dmaConfig adma configurations, must be not NULL, since the function is target for ADMA only. + * @param transfer scatter gather transfer content. + * + * @retval #kStatus_InvalidArgument Argument is invalid. + * @retval #kStatus_USDHC_BusyTransferring Busy transferring. + * @retval #kStatus_USDHC_PrepareAdmaDescriptorFailed Prepare ADMA descriptor failed. + * @retval #kStatus_Success Operate successfully. + */ +status_t USDHC_TransferScatterGatherADMANonBlocking(USDHC_Type *base, + usdhc_handle_t *handle, + usdhc_adma_config_t *dmaConfig, + usdhc_scatter_gather_transfer_t *transfer); +#else +/*! + * @brief Transfers the command/data using an interrupt and an asynchronous method. + * + * This function sends a command and data and returns immediately. It doesn't wait for the transfer to complete or + * to encounter an error. The application must not call this API in multiple threads at the same time. Because of that + * this API doesn't support the re-entry mechanism. + * + * @note Call API @ref USDHC_TransferCreateHandle when calling this API. + * + * @param base USDHC peripheral base address. + * @param handle USDHC handle. + * @param dmaConfig ADMA configuration. + * @param transfer Transfer content. + * @retval #kStatus_InvalidArgument Argument is invalid. + * @retval #kStatus_USDHC_BusyTransferring Busy transferring. + * @retval #kStatus_USDHC_PrepareAdmaDescriptorFailed Prepare ADMA descriptor failed. + * @retval #kStatus_Success Operate successfully. + */ +status_t USDHC_TransferNonBlocking(USDHC_Type *base, + usdhc_handle_t *handle, + usdhc_adma_config_t *dmaConfig, + usdhc_transfer_t *transfer); +#endif + +/*! + * @brief Transfers the command/data using a blocking method. + * + * This function waits until the command response/data is received or the USDHC encounters an error by polling the + * status flag. \n + * The application must not call this API in multiple threads at the same time. Because this API doesn't + * support the re-entry mechanism. + * + * @note There is no need to call API @ref USDHC_TransferCreateHandle when calling this API. + * + * @param base USDHC peripheral base address. + * @param dmaConfig adma configuration + * @param transfer Transfer content. + * @retval #kStatus_InvalidArgument Argument is invalid. + * @retval #kStatus_USDHC_PrepareAdmaDescriptorFailed Prepare ADMA descriptor failed. + * @retval #kStatus_USDHC_SendCommandFailed Send command failed. + * @retval #kStatus_USDHC_TransferDataFailed Transfer data failed. + * @retval #kStatus_Success Operate successfully. + */ +status_t USDHC_TransferBlocking(USDHC_Type *base, usdhc_adma_config_t *dmaConfig, usdhc_transfer_t *transfer); + +/*! + * @brief IRQ handler for the USDHC. + * + * This function deals with the IRQs on the given host controller. + * + * @param base USDHC peripheral base address. + * @param handle USDHC handle. + */ +void USDHC_TransferHandleIRQ(USDHC_Type *base, usdhc_handle_t *handle); + +/* @} */ + +#if defined(__cplusplus) +} +#endif +/*! @} */ + +#endif /* _FSL_USDHC_H_*/ |