1 files changed, 0 insertions, 183 deletions
diff --git a/bsps/arm/imxrt/include/fsl_xbara.h b/bsps/arm/imxrt/include/fsl_xbara.h
deleted file mode 100644
index 1aeb4fc86d..0000000000
--- a/bsps/arm/imxrt/include/fsl_xbara.h
+++ /dev/null
@@ -1,183 +0,0 @@
-/*
- * Copyright (c) 2015, Freescale Semiconductor, Inc.
- * Copyright 2016-2019 NXP
- * All rights reserved.
- *
- * SPDX-License-Identifier: BSD-3-Clause
- */
-
-#ifndef _FSL_XBARA_H_
-#define _FSL_XBARA_H_
-
-#include "fsl_common.h"
-
-/*!
- * @addtogroup xbara
- * @{
- */
-
-/*******************************************************************************
- * Definitions
- ******************************************************************************/
-
-#define FSL_XBARA_DRIVER_VERSION (MAKE_VERSION(2, 0, 5))
-
-/* Macros for entire XBARA_SELx register.  */
-#define XBARA_SELx(base, output) (((volatile uint16_t *)(&((base)->SEL0)))[(uint32_t)(output) / 2UL])
-
-/* Set the XBARA_SELx_SELx field to a new value. */
-#define XBARA_WR_SELx_SELx(base, input, output) XBARA_SetSignalsConnection((base), (input), (output))
-
-/*!
- * @brief XBARA active edge for detection
- */
-typedef enum _xbara_active_edge
-{
-    kXBARA_EdgeNone             = 0U, /*!< Edge detection status bit never asserts. */
-    kXBARA_EdgeRising           = 1U, /*!< Edge detection status bit asserts on rising edges. */
-    kXBARA_EdgeFalling          = 2U, /*!< Edge detection status bit asserts on falling edges. */
-    kXBARA_EdgeRisingAndFalling = 3U  /*!< Edge detection status bit asserts on rising and falling edges. */
-} xbara_active_edge_t;
-
-/*!
- * @brief Defines the XBARA DMA and interrupt configurations.
- */
-typedef enum _xbar_request
-{
-    kXBARA_RequestDisable         = 0U, /*!< Interrupt and DMA are disabled. */
-    kXBARA_RequestDMAEnable       = 1U, /*!< DMA enabled, interrupt disabled. */
-    kXBARA_RequestInterruptEnalbe = 2U  /*!< Interrupt enabled, DMA disabled. */
-} xbara_request_t;
-
-/*!
- * @brief XBARA status flags.
- *
- * This provides constants for the XBARA status flags for use in the XBARA functions.
- */
-typedef enum _xbara_status_flag_t
-{
-    kXBARA_EdgeDetectionOut0 =
-        (XBARA_CTRL0_STS0_MASK), /*!< XBAR_OUT0 active edge interrupt flag, sets when active edge detected. */
-    kXBARA_EdgeDetectionOut1 =
-        (XBARA_CTRL0_STS1_MASK), /*!< XBAR_OUT1 active edge interrupt flag, sets when active edge detected. */
-    kXBARA_EdgeDetectionOut2 =
-        (XBARA_CTRL1_STS2_MASK << 16U), /*!< XBAR_OUT2 active edge interrupt flag, sets when active edge detected. */
-    kXBARA_EdgeDetectionOut3 =
-        (XBARA_CTRL1_STS3_MASK << 16U), /*!< XBAR_OUT3 active edge interrupt flag, sets when active edge detected. */
-} xbara_status_flag_t;
-
-/*!
- * @brief Defines the configuration structure of the XBARA control register.
- *
- * This structure keeps the configuration of XBARA control register for one output.
- * Control registers are available only for a few outputs. Not every XBARA module has
- * control registers.
- */
-typedef struct XBARAControlConfig
-{
-    xbara_active_edge_t activeEdge; /*!< Active edge to be detected. */
-    xbara_request_t requestType;    /*!< Selects DMA/Interrupt request. */
-} xbara_control_config_t;
-
-/*******************************************************************************
- * API
- ******************************************************************************/
-
-#if defined(__cplusplus)
-extern "C" {
-#endif /* __cplusplus */
-
-/*!
- * @name XBARA functional Operation.
- * @{
- */
-
-/*!
- * @brief Initializes the XBARA module.
- *
- * This function un-gates the XBARA clock.
- *
- * @param base XBARA peripheral address.
- */
-void XBARA_Init(XBARA_Type *base);
-
-/*!
- * @brief Shuts down the XBARA module.
- *
- * This function disables XBARA clock.
- *
- * @param base XBARA peripheral address.
- */
-void XBARA_Deinit(XBARA_Type *base);
-
-/*!
- * @brief Sets a connection between the selected XBARA_IN[*] input and the XBARA_OUT[*] output signal.
- *
- * This function connects the XBARA input to the selected XBARA output.
- * If more than one XBARA module is available, only the inputs and outputs from the same module
- * can be connected.
- *
- * Example:
-   @code
-   XBARA_SetSignalsConnection(XBARA, kXBARA_InputPIT_TRG0, kXBARA_OutputDMAMUX18);
-   @endcode
- *
- * @param base XBARA peripheral address.
- * @param input XBARA input signal.
- * @param output XBARA output signal.
- */
-void XBARA_SetSignalsConnection(XBARA_Type *base, xbar_input_signal_t input, xbar_output_signal_t output);
-
-/*!
- * @brief Gets the active edge detection status.
- *
- * This function gets the active edge detect status of all XBARA_OUTs. If the
- * active edge occurs, the return value is asserted. When the interrupt or the DMA
- * functionality is enabled for the XBARA_OUTx, this field is 1 when the interrupt
- * or DMA request is asserted and 0 when the interrupt or DMA request has been
- * cleared.
- *
- * @param base XBARA peripheral address.
- * @return the mask of these status flag bits.
- */
-uint32_t XBARA_GetStatusFlags(XBARA_Type *base);
-
-/*!
- * @brief Clears the edge detection status flags of relative mask.
- *
- * @param base XBARA peripheral address.
- * @param mask the status flags to clear.
- */
-void XBARA_ClearStatusFlags(XBARA_Type *base, uint32_t mask);
-
-/*!
- * @brief Configures the XBARA control register.
- *
- * This function configures an XBARA control register. The active edge detection
- * and the DMA/IRQ function on the corresponding XBARA output can be set.
- *
- * Example:
-   @code
-   xbara_control_config_t userConfig;
-   userConfig.activeEdge = kXBARA_EdgeRising;
-   userConfig.requestType = kXBARA_RequestInterruptEnalbe;
-   XBARA_SetOutputSignalConfig(XBARA, kXBARA_OutputDMAMUX18, &userConfig);
-   @endcode
- *
- * @param base XBARA peripheral address.
- * @param output XBARA output number.
- * @param controlConfig Pointer to structure that keeps configuration of control register.
- */
-void XBARA_SetOutputSignalConfig(XBARA_Type *base,
-                                 xbar_output_signal_t output,
-                                 const xbara_control_config_t *controlConfig);
-
-#if defined(__cplusplus)
-}
-#endif /* __cplusplus */
-
-/*! @}*/
-
-/*!* @} */
-
-#endif /* _FSL_XBARA_H_ */