1 files changed, 218 insertions, 0 deletions
diff --git a/bsps/arm/imxrt/include/fsl_ewm.h b/bsps/arm/imxrt/include/fsl_ewm.h
new file mode 100644
index 0000000000..1b2e35b7b2
--- /dev/null
+++ b/bsps/arm/imxrt/include/fsl_ewm.h
@@ -0,0 +1,218 @@
+/*
+ * Copyright (c) 2015, Freescale Semiconductor, Inc.
+ * Copyright 2016-2017, 2020 NXP
+ * All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+#ifndef _FSL_EWM_H_
+#define _FSL_EWM_H_
+
+#include "fsl_common.h"
+
+/*!
+ * @addtogroup ewm
+ * @{
+ */
+
+/*******************************************************************************
+ * Definitions
+ *******************************************************************************/
+
+/*! @name Driver version */
+/*@{*/
+/*! @brief EWM driver version 2.0.2. */
+#define FSL_EWM_DRIVER_VERSION (MAKE_VERSION(2, 0, 2))
+/*@}*/
+
+/*! @brief Describes EWM clock source. */
+#if defined(FSL_FEATURE_EWM_HAS_CLOCK_SELECT) && FSL_FEATURE_EWM_HAS_CLOCK_SELECT
+typedef enum _ewm_lpo_clock_source
+{
+    kEWM_LpoClockSource0 = 0U, /*!< EWM clock sourced from lpo_clk[0]*/
+    kEWM_LpoClockSource1 = 1U, /*!< EWM clock sourced from lpo_clk[1]*/
+    kEWM_LpoClockSource2 = 2U, /*!< EWM clock sourced from lpo_clk[2]*/
+    kEWM_LpoClockSource3 = 3U, /*!< EWM clock sourced from lpo_clk[3]*/
+} ewm_lpo_clock_source_t;
+#endif /* FSL_FEATURE_EWM_HAS_CLOCK_SELECT */
+
+/*!
+ * @brief Data structure for EWM configuration.
+ *
+ * This structure is used to configure the EWM.
+ */
+typedef struct _ewm_config
+{
+    bool enableEwm;           /*!< Enable EWM module */
+    bool enableEwmInput;      /*!< Enable EWM_in input */
+    bool setInputAssertLogic; /*!< EWM_in signal assertion state */
+    bool enableInterrupt;     /*!< Enable EWM interrupt */
+#if defined(FSL_FEATURE_EWM_HAS_CLOCK_SELECT) && FSL_FEATURE_EWM_HAS_CLOCK_SELECT
+    ewm_lpo_clock_source_t clockSource; /*!< Clock source select */
+#endif                                  /* FSL_FEATURE_EWM_HAS_CLOCK_SELECT */
+#if defined(FSL_FEATURE_EWM_HAS_PRESCALER) && FSL_FEATURE_EWM_HAS_PRESCALER
+    uint8_t prescaler;        /*!< Clock prescaler value */
+#endif                        /* FSL_FEATURE_EWM_HAS_PRESCALER */
+    uint8_t compareLowValue;  /*!< Compare low-register value */
+    uint8_t compareHighValue; /*!< Compare high-register value */
+} ewm_config_t;
+
+/*!
+ * @brief EWM interrupt configuration structure with default settings all disabled.
+ *
+ * This structure contains the settings for all of EWM interrupt configurations.
+ */
+enum _ewm_interrupt_enable_t
+{
+    kEWM_InterruptEnable = EWM_CTRL_INTEN_MASK, /*!< Enable the EWM to generate an interrupt*/
+};
+
+/*!
+ * @brief EWM status flags.
+ *
+ * This structure contains the constants for the EWM status flags for use in the EWM functions.
+ */
+enum _ewm_status_flags_t
+{
+    kEWM_RunningFlag = EWM_CTRL_EWMEN_MASK, /*!< Running flag, set when EWM is enabled*/
+};
+
+/*******************************************************************************
+ * API
+ *******************************************************************************/
+
+#if defined(__cplusplus)
+extern "C" {
+#endif /* __cplusplus */
+
+/*!
+ * @name EWM initialization and de-initialization
+ * @{
+ */
+
+/*!
+ * @brief Initializes the EWM peripheral.
+ *
+ * This function is used to initialize the EWM. After calling, the EWM
+ * runs immediately according to the configuration.
+ * Note that, except for the interrupt enable control bit, other control bits and registers are write once after a
+ * CPU reset. Modifying them more than once generates a bus transfer error.
+ *
+ * This is an example.
+ * @code
+ *   ewm_config_t config;
+ *   EWM_GetDefaultConfig(&config);
+ *   config.compareHighValue = 0xAAU;
+ *   EWM_Init(ewm_base,&config);
+ * @endcode
+ *
+ * @param base EWM peripheral base address
+ * @param config The configuration of the EWM
+ */
+void EWM_Init(EWM_Type *base, const ewm_config_t *config);
+
+/*!
+ * @brief Deinitializes the EWM peripheral.
+ *
+ * This function is used to shut down the EWM.
+ *
+ * @param base EWM peripheral base address
+ */
+void EWM_Deinit(EWM_Type *base);
+
+/*!
+ * @brief Initializes the EWM configuration structure.
+ *
+ * This function initializes the EWM configuration structure to default values. The default
+ * values are as follows.
+ * @code
+ *   ewmConfig->enableEwm = true;
+ *   ewmConfig->enableEwmInput = false;
+ *   ewmConfig->setInputAssertLogic = false;
+ *   ewmConfig->enableInterrupt = false;
+ *   ewmConfig->ewm_lpo_clock_source_t = kEWM_LpoClockSource0;
+ *   ewmConfig->prescaler = 0;
+ *   ewmConfig->compareLowValue = 0;
+ *   ewmConfig->compareHighValue = 0xFEU;
+ * @endcode
+ *
+ * @param config Pointer to the EWM configuration structure.
+ * @see ewm_config_t
+ */
+void EWM_GetDefaultConfig(ewm_config_t *config);
+
+/* @} */
+
+/*!
+ * @name EWM functional Operation
+ * @{
+ */
+
+/*!
+ * @brief Enables the EWM interrupt.
+ *
+ * This function enables the EWM interrupt.
+ *
+ * @param base EWM peripheral base address
+ * @param mask The interrupts to enable
+ *        The parameter can be combination of the following source if defined
+ *        @arg kEWM_InterruptEnable
+ */
+static inline void EWM_EnableInterrupts(EWM_Type *base, uint32_t mask)
+{
+    base->CTRL |= (uint8_t)mask;
+}
+
+/*!
+ * @brief Disables the EWM interrupt.
+ *
+ * This function enables the EWM interrupt.
+ *
+ * @param base EWM peripheral base address
+ * @param mask The interrupts to disable
+ *        The parameter can be combination of the following source if defined
+ *        @arg kEWM_InterruptEnable
+ */
+static inline void EWM_DisableInterrupts(EWM_Type *base, uint32_t mask)
+{
+    base->CTRL &= (uint8_t)(~mask);
+}
+
+/*!
+ * @brief Gets all status flags.
+ *
+ * This function gets all status flags.
+ *
+ * This is an example for getting the running flag.
+ * @code
+ *   uint32_t status;
+ *   status = EWM_GetStatusFlags(ewm_base) & kEWM_RunningFlag;
+ * @endcode
+ * @param base        EWM peripheral base address
+ * @return            State of the status flag: asserted (true) or not-asserted (false).@see _ewm_status_flags_t
+ *                    - True: a related status flag has been set.
+ *                    - False: a related status flag is not set.
+ */
+static inline uint32_t EWM_GetStatusFlags(EWM_Type *base)
+{
+    return ((uint32_t)base->CTRL & EWM_CTRL_EWMEN_MASK);
+}
+
+/*!
+ * @brief Services the EWM.
+ *
+ * This function resets the EWM counter to zero.
+ *
+ * @param base EWM peripheral base address
+ */
+void EWM_Refresh(EWM_Type *base);
+
+/*@}*/
+
+#if defined(__cplusplus)
+}
+#endif /* __cplusplus */
+
+/*! @}*/
+
+#endif /* _FSL_EWM_H_ */