diff options
Diffstat (limited to 'bsps/arm/altera-cyclone-v/include/bsp/socal/alt_clkmgr.h')
| -rw-r--r-- | bsps/arm/altera-cyclone-v/include/bsp/socal/alt_clkmgr.h | 6464 |
1 files changed, 6464 insertions, 0 deletions
diff --git a/bsps/arm/altera-cyclone-v/include/bsp/socal/alt_clkmgr.h b/bsps/arm/altera-cyclone-v/include/bsp/socal/alt_clkmgr.h new file mode 100644 index 0000000000..1875a84f10 --- /dev/null +++ b/bsps/arm/altera-cyclone-v/include/bsp/socal/alt_clkmgr.h @@ -0,0 +1,6464 @@ +/******************************************************************************* +* * +* Copyright 2013 Altera Corporation. All Rights Reserved. * +* * +* Redistribution and use in source and binary forms, with or without * +* modification, are permitted provided that the following conditions are met: * +* * +* 1. Redistributions of source code must retain the above copyright notice, * +* this list of conditions and the following disclaimer. * +* * +* 2. Redistributions in binary form must reproduce the above copyright notice, * +* this list of conditions and the following disclaimer in the documentation * +* and/or other materials provided with the distribution. * +* * +* 3. The name of the author may not be used to endorse or promote products * +* derived from this software without specific prior written permission. * +* * +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER "AS IS" AND ANY EXPRESS OR * +* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * +* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE DISCLAIMED. IN NO * +* EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, * +* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; * +* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, * +* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR * +* OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF * +* ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * +* * +*******************************************************************************/ + +/* Altera - ALT_CLKMGR */ + +#ifndef __ALTERA_ALT_CLKMGR_H__ +#define __ALTERA_ALT_CLKMGR_H__ + +#ifdef __cplusplus +extern "C" +{ +#endif /* __cplusplus */ + +/* + * Component : Clock Manager Module - ALT_CLKMGR + * Clock Manager Module + * + * Registers in the Clock Manager module + * + */ +/* + * Register : Control Register - ctrl + * + * Contains fields that control the entire Clock Manager. + * + * Register Layout + * + * Bits | Access | Reset | Description + * :-------|:-------|:------|:------------------------------ + * [0] | RW | 0x1 | Safe Mode + * [1] | ??? | 0x0 | *UNDEFINED* + * [2] | RW | 0x1 | Enable SafeMode on Warm Reset + * [31:3] | ??? | 0x0 | *UNDEFINED* + * + */ +/* + * Field : Safe Mode - safemode + * + * When set the Clock Manager is in Safe Mode. + * + * In Safe Mode Clock Manager register settings defining clock behavior are ignored + * and clocks are set to a Safe Mode state.In Safe Mode all clocks with the + * optional exception of debug clocks, are directly generated from the EOSC1 clock + * input, all PLLs are bypassed, all programmable dividers are set to 1 and all + * clocks are enabled. + * + * This bit should only be cleared when clocks have been correctly configured + * + * This field is set on a cold reset and optionally on a warm reset and may not be + * set by SW. + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_CTL_SAFEMOD register field. */ +#define ALT_CLKMGR_CTL_SAFEMOD_LSB 0 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_CTL_SAFEMOD register field. */ +#define ALT_CLKMGR_CTL_SAFEMOD_MSB 0 +/* The width in bits of the ALT_CLKMGR_CTL_SAFEMOD register field. */ +#define ALT_CLKMGR_CTL_SAFEMOD_WIDTH 1 +/* The mask used to set the ALT_CLKMGR_CTL_SAFEMOD register field value. */ +#define ALT_CLKMGR_CTL_SAFEMOD_SET_MSK 0x00000001 +/* The mask used to clear the ALT_CLKMGR_CTL_SAFEMOD register field value. */ +#define ALT_CLKMGR_CTL_SAFEMOD_CLR_MSK 0xfffffffe +/* The reset value of the ALT_CLKMGR_CTL_SAFEMOD register field. */ +#define ALT_CLKMGR_CTL_SAFEMOD_RESET 0x1 +/* Extracts the ALT_CLKMGR_CTL_SAFEMOD field value from a register. */ +#define ALT_CLKMGR_CTL_SAFEMOD_GET(value) (((value) & 0x00000001) >> 0) +/* Produces a ALT_CLKMGR_CTL_SAFEMOD register field value suitable for setting the register. */ +#define ALT_CLKMGR_CTL_SAFEMOD_SET(value) (((value) << 0) & 0x00000001) + +/* + * Field : Enable SafeMode on Warm Reset - ensfmdwr + * + * When set the Clock Manager will respond to a Safe Mode request from the Reset + * Manager on a warm reset by setting the Safe Mode bit. When clear the clock + * manager will not set the the Safe Mode bit on a warm reset This bit is cleared + * on a cold reset. Warm reset has no affect on this bit. + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_CTL_ENSFMDWR register field. */ +#define ALT_CLKMGR_CTL_ENSFMDWR_LSB 2 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_CTL_ENSFMDWR register field. */ +#define ALT_CLKMGR_CTL_ENSFMDWR_MSB 2 +/* The width in bits of the ALT_CLKMGR_CTL_ENSFMDWR register field. */ +#define ALT_CLKMGR_CTL_ENSFMDWR_WIDTH 1 +/* The mask used to set the ALT_CLKMGR_CTL_ENSFMDWR register field value. */ +#define ALT_CLKMGR_CTL_ENSFMDWR_SET_MSK 0x00000004 +/* The mask used to clear the ALT_CLKMGR_CTL_ENSFMDWR register field value. */ +#define ALT_CLKMGR_CTL_ENSFMDWR_CLR_MSK 0xfffffffb +/* The reset value of the ALT_CLKMGR_CTL_ENSFMDWR register field. */ +#define ALT_CLKMGR_CTL_ENSFMDWR_RESET 0x1 +/* Extracts the ALT_CLKMGR_CTL_ENSFMDWR field value from a register. */ +#define ALT_CLKMGR_CTL_ENSFMDWR_GET(value) (((value) & 0x00000004) >> 2) +/* Produces a ALT_CLKMGR_CTL_ENSFMDWR register field value suitable for setting the register. */ +#define ALT_CLKMGR_CTL_ENSFMDWR_SET(value) (((value) << 2) & 0x00000004) + +#ifndef __ASSEMBLY__ +/* + * WARNING: The C register and register group struct declarations are provided for + * convenience and illustrative purposes. They should, however, be used with + * caution as the C language standard provides no guarantees about the alignment or + * atomicity of device memory accesses. The recommended practice for writing + * hardware drivers is to use the SoCAL access macros and alt_read_word() and + * alt_write_word() functions. + * + * The struct declaration for register ALT_CLKMGR_CTL. + */ +struct ALT_CLKMGR_CTL_s +{ + uint32_t safemode : 1; /* Safe Mode */ + uint32_t : 1; /* *UNDEFINED* */ + uint32_t ensfmdwr : 1; /* Enable SafeMode on Warm Reset */ + uint32_t : 29; /* *UNDEFINED* */ +}; + +/* The typedef declaration for register ALT_CLKMGR_CTL. */ +typedef volatile struct ALT_CLKMGR_CTL_s ALT_CLKMGR_CTL_t; +#endif /* __ASSEMBLY__ */ + +/* The byte offset of the ALT_CLKMGR_CTL register from the beginning of the component. */ +#define ALT_CLKMGR_CTL_OFST 0x0 + +/* + * Register : PLL Bypass Register - bypass + * + * Contains fields that control bypassing each PLL. + * + * Register Layout + * + * Bits | Access | Reset | Description + * :-------|:-------|:------|:----------------------------- + * [0] | RW | 0x1 | Main PLL Bypass + * [1] | RW | 0x1 | SDRAM PLL Bypass + * [2] | RW | 0x0 | SDRAM PLL Bypass Source + * [3] | RW | 0x1 | Peripheral PLL Bypass + * [4] | RW | 0x0 | Peripheral PLL Bypass Source + * [31:5] | ??? | 0x0 | *UNDEFINED* + * + */ +/* + * Field : Main PLL Bypass - mainpll + * + * When set, causes the Main PLL VCO and counters to be bypassed so that all clocks + * generated by the Main PLL are directly driven from the Main PLL input clock. The + * bypass source for Main PLL is the external eosc1_clk. + * + * The reset value for this bit is applied on a cold reset. Warm reset has no + * affect on this bit. + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_BYPASS_MAINPLL register field. */ +#define ALT_CLKMGR_BYPASS_MAINPLL_LSB 0 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_BYPASS_MAINPLL register field. */ +#define ALT_CLKMGR_BYPASS_MAINPLL_MSB 0 +/* The width in bits of the ALT_CLKMGR_BYPASS_MAINPLL register field. */ +#define ALT_CLKMGR_BYPASS_MAINPLL_WIDTH 1 +/* The mask used to set the ALT_CLKMGR_BYPASS_MAINPLL register field value. */ +#define ALT_CLKMGR_BYPASS_MAINPLL_SET_MSK 0x00000001 +/* The mask used to clear the ALT_CLKMGR_BYPASS_MAINPLL register field value. */ +#define ALT_CLKMGR_BYPASS_MAINPLL_CLR_MSK 0xfffffffe +/* The reset value of the ALT_CLKMGR_BYPASS_MAINPLL register field. */ +#define ALT_CLKMGR_BYPASS_MAINPLL_RESET 0x1 +/* Extracts the ALT_CLKMGR_BYPASS_MAINPLL field value from a register. */ +#define ALT_CLKMGR_BYPASS_MAINPLL_GET(value) (((value) & 0x00000001) >> 0) +/* Produces a ALT_CLKMGR_BYPASS_MAINPLL register field value suitable for setting the register. */ +#define ALT_CLKMGR_BYPASS_MAINPLL_SET(value) (((value) << 0) & 0x00000001) + +/* + * Field : SDRAM PLL Bypass - sdrpll + * + * When set, causes the SDRAM PLL VCO and counters to be bypassed so that all + * clocks generated by the SDRAM PLL are directly driven from either eosc1_clk or + * the SDRAM PLL input clock. + * + * The bypass clock source for SDRAM PLL is determined by the SDRAM PLL Bypass + * Source Register bit. + * + * The reset value for this bit is applied on a cold reset. Warm reset has no + * affect on this bit. + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_BYPASS_SDRPLL register field. */ +#define ALT_CLKMGR_BYPASS_SDRPLL_LSB 1 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_BYPASS_SDRPLL register field. */ +#define ALT_CLKMGR_BYPASS_SDRPLL_MSB 1 +/* The width in bits of the ALT_CLKMGR_BYPASS_SDRPLL register field. */ +#define ALT_CLKMGR_BYPASS_SDRPLL_WIDTH 1 +/* The mask used to set the ALT_CLKMGR_BYPASS_SDRPLL register field value. */ +#define ALT_CLKMGR_BYPASS_SDRPLL_SET_MSK 0x00000002 +/* The mask used to clear the ALT_CLKMGR_BYPASS_SDRPLL register field value. */ +#define ALT_CLKMGR_BYPASS_SDRPLL_CLR_MSK 0xfffffffd +/* The reset value of the ALT_CLKMGR_BYPASS_SDRPLL register field. */ +#define ALT_CLKMGR_BYPASS_SDRPLL_RESET 0x1 +/* Extracts the ALT_CLKMGR_BYPASS_SDRPLL field value from a register. */ +#define ALT_CLKMGR_BYPASS_SDRPLL_GET(value) (((value) & 0x00000002) >> 1) +/* Produces a ALT_CLKMGR_BYPASS_SDRPLL register field value suitable for setting the register. */ +#define ALT_CLKMGR_BYPASS_SDRPLL_SET(value) (((value) << 1) & 0x00000002) + +/* + * Field : SDRAM PLL Bypass Source - sdrpllsrc + * + * This bit defines the bypass source forSDRAM PLL. + * + * When changing fields that affect VCO lock the PLL must be bypassed and this bit + * must be set to OSC1_CLK. + * + * The reset value for this bit is applied on a cold reset. Warm reset has no + * affect on this bit. + * + * Field Enumeration Values: + * + * Enum | Value | Description + * :-----------------------------------------------|:------|:--------------------- + * ALT_CLKMGR_BYPASS_SDRPLLSRC_E_SELECT_EOSC1 | 0x0 | Select EOSC1 + * ALT_CLKMGR_BYPASS_SDRPLLSRC_E_SELECT_INPUT_MUX | 0x1 | Select PLL Input Mux + * + * Field Access Macros: + * + */ +/* + * Enumerated value for register field ALT_CLKMGR_BYPASS_SDRPLLSRC + * + * Select EOSC1 + */ +#define ALT_CLKMGR_BYPASS_SDRPLLSRC_E_SELECT_EOSC1 0x0 +/* + * Enumerated value for register field ALT_CLKMGR_BYPASS_SDRPLLSRC + * + * Select PLL Input Mux + */ +#define ALT_CLKMGR_BYPASS_SDRPLLSRC_E_SELECT_INPUT_MUX 0x1 + +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_BYPASS_SDRPLLSRC register field. */ +#define ALT_CLKMGR_BYPASS_SDRPLLSRC_LSB 2 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_BYPASS_SDRPLLSRC register field. */ +#define ALT_CLKMGR_BYPASS_SDRPLLSRC_MSB 2 +/* The width in bits of the ALT_CLKMGR_BYPASS_SDRPLLSRC register field. */ +#define ALT_CLKMGR_BYPASS_SDRPLLSRC_WIDTH 1 +/* The mask used to set the ALT_CLKMGR_BYPASS_SDRPLLSRC register field value. */ +#define ALT_CLKMGR_BYPASS_SDRPLLSRC_SET_MSK 0x00000004 +/* The mask used to clear the ALT_CLKMGR_BYPASS_SDRPLLSRC register field value. */ +#define ALT_CLKMGR_BYPASS_SDRPLLSRC_CLR_MSK 0xfffffffb +/* The reset value of the ALT_CLKMGR_BYPASS_SDRPLLSRC register field. */ +#define ALT_CLKMGR_BYPASS_SDRPLLSRC_RESET 0x0 +/* Extracts the ALT_CLKMGR_BYPASS_SDRPLLSRC field value from a register. */ +#define ALT_CLKMGR_BYPASS_SDRPLLSRC_GET(value) (((value) & 0x00000004) >> 2) +/* Produces a ALT_CLKMGR_BYPASS_SDRPLLSRC register field value suitable for setting the register. */ +#define ALT_CLKMGR_BYPASS_SDRPLLSRC_SET(value) (((value) << 2) & 0x00000004) + +/* + * Field : Peripheral PLL Bypass - perpll + * + * When set, causes the Peripheral PLL VCO and counters to be bypassed so that all + * clocks generated by the Peripheral PLL are directly driven from either eosc1_clk + * or the Peripheral PLL input clock. + * + * The bypass clock source for Peripheral PLL is determined by the Peripheral PLL + * Bypass Source Register bit. + * + * The reset value for this bit is applied on a cold reset. Warm reset has no + * affect on this bit. + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_BYPASS_PERPLL register field. */ +#define ALT_CLKMGR_BYPASS_PERPLL_LSB 3 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_BYPASS_PERPLL register field. */ +#define ALT_CLKMGR_BYPASS_PERPLL_MSB 3 +/* The width in bits of the ALT_CLKMGR_BYPASS_PERPLL register field. */ +#define ALT_CLKMGR_BYPASS_PERPLL_WIDTH 1 +/* The mask used to set the ALT_CLKMGR_BYPASS_PERPLL register field value. */ +#define ALT_CLKMGR_BYPASS_PERPLL_SET_MSK 0x00000008 +/* The mask used to clear the ALT_CLKMGR_BYPASS_PERPLL register field value. */ +#define ALT_CLKMGR_BYPASS_PERPLL_CLR_MSK 0xfffffff7 +/* The reset value of the ALT_CLKMGR_BYPASS_PERPLL register field. */ +#define ALT_CLKMGR_BYPASS_PERPLL_RESET 0x1 +/* Extracts the ALT_CLKMGR_BYPASS_PERPLL field value from a register. */ +#define ALT_CLKMGR_BYPASS_PERPLL_GET(value) (((value) & 0x00000008) >> 3) +/* Produces a ALT_CLKMGR_BYPASS_PERPLL register field value suitable for setting the register. */ +#define ALT_CLKMGR_BYPASS_PERPLL_SET(value) (((value) << 3) & 0x00000008) + +/* + * Field : Peripheral PLL Bypass Source - perpllsrc + * + * This bit defines the bypass source forPeripheral PLL. + * + * When changing fields that affect VCO lock the PLL must be bypassed and this bit + * must be set to OSC1_CLK. + * + * The reset value for this bit is applied on a cold reset. Warm reset has no + * affect on this bit. + * + * Field Enumeration Values: + * + * Enum | Value | Description + * :-----------------------------------------------|:------|:--------------------- + * ALT_CLKMGR_BYPASS_PERPLLSRC_E_SELECT_EOSC1 | 0x0 | Select EOSC1 + * ALT_CLKMGR_BYPASS_PERPLLSRC_E_SELECT_INPUT_MUX | 0x1 | Select PLL Input Mux + * + * Field Access Macros: + * + */ +/* + * Enumerated value for register field ALT_CLKMGR_BYPASS_PERPLLSRC + * + * Select EOSC1 + */ +#define ALT_CLKMGR_BYPASS_PERPLLSRC_E_SELECT_EOSC1 0x0 +/* + * Enumerated value for register field ALT_CLKMGR_BYPASS_PERPLLSRC + * + * Select PLL Input Mux + */ +#define ALT_CLKMGR_BYPASS_PERPLLSRC_E_SELECT_INPUT_MUX 0x1 + +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_BYPASS_PERPLLSRC register field. */ +#define ALT_CLKMGR_BYPASS_PERPLLSRC_LSB 4 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_BYPASS_PERPLLSRC register field. */ +#define ALT_CLKMGR_BYPASS_PERPLLSRC_MSB 4 +/* The width in bits of the ALT_CLKMGR_BYPASS_PERPLLSRC register field. */ +#define ALT_CLKMGR_BYPASS_PERPLLSRC_WIDTH 1 +/* The mask used to set the ALT_CLKMGR_BYPASS_PERPLLSRC register field value. */ +#define ALT_CLKMGR_BYPASS_PERPLLSRC_SET_MSK 0x00000010 +/* The mask used to clear the ALT_CLKMGR_BYPASS_PERPLLSRC register field value. */ +#define ALT_CLKMGR_BYPASS_PERPLLSRC_CLR_MSK 0xffffffef +/* The reset value of the ALT_CLKMGR_BYPASS_PERPLLSRC register field. */ +#define ALT_CLKMGR_BYPASS_PERPLLSRC_RESET 0x0 +/* Extracts the ALT_CLKMGR_BYPASS_PERPLLSRC field value from a register. */ +#define ALT_CLKMGR_BYPASS_PERPLLSRC_GET(value) (((value) & 0x00000010) >> 4) +/* Produces a ALT_CLKMGR_BYPASS_PERPLLSRC register field value suitable for setting the register. */ +#define ALT_CLKMGR_BYPASS_PERPLLSRC_SET(value) (((value) << 4) & 0x00000010) + +#ifndef __ASSEMBLY__ +/* + * WARNING: The C register and register group struct declarations are provided for + * convenience and illustrative purposes. They should, however, be used with + * caution as the C language standard provides no guarantees about the alignment or + * atomicity of device memory accesses. The recommended practice for writing + * hardware drivers is to use the SoCAL access macros and alt_read_word() and + * alt_write_word() functions. + * + * The struct declaration for register ALT_CLKMGR_BYPASS. + */ +struct ALT_CLKMGR_BYPASS_s +{ + uint32_t mainpll : 1; /* Main PLL Bypass */ + uint32_t sdrpll : 1; /* SDRAM PLL Bypass */ + uint32_t sdrpllsrc : 1; /* SDRAM PLL Bypass Source */ + uint32_t perpll : 1; /* Peripheral PLL Bypass */ + uint32_t perpllsrc : 1; /* Peripheral PLL Bypass Source */ + uint32_t : 27; /* *UNDEFINED* */ +}; + +/* The typedef declaration for register ALT_CLKMGR_BYPASS. */ +typedef volatile struct ALT_CLKMGR_BYPASS_s ALT_CLKMGR_BYPASS_t; +#endif /* __ASSEMBLY__ */ + +/* The byte offset of the ALT_CLKMGR_BYPASS register from the beginning of the component. */ +#define ALT_CLKMGR_BYPASS_OFST 0x4 + +/* + * Register : Interrupt Status Register - inter + * + * Contains fields that indicate the PLL lock status. + * + * Fields are only reset by a cold reset. + * + * Register Layout + * + * Bits | Access | Reset | Description + * :-------|:-------|:--------|:----------------------------------- + * [0] | RW | 0x0 | Main PLL Achieved Lock + * [1] | RW | 0x0 | Peripheral PLL Achieved Lock + * [2] | RW | 0x0 | SDRAM PLL Achieved Lock + * [3] | RW | 0x0 | Main PLL Lost Lock + * [4] | RW | 0x0 | Peripheral PLL Lost Lock + * [5] | RW | 0x0 | SDRAM PLL Lost Lock + * [6] | R | Unknown | Main PLL Current Lock Status + * [7] | R | Unknown | Peripheral PLL Current Lock Status + * [8] | R | Unknown | SDRAM PLL Current Lock Status + * [31:9] | ??? | 0x0 | *UNDEFINED* + * + */ +/* + * Field : Main PLL Achieved Lock - mainpllachieved + * + * If 1, the Main PLL has achieved lock at least once since this bit was cleared. + * If 0, the Main PLL has not achieved lock since this bit was cleared. + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_INTER_MAINPLLACHIEVED register field. */ +#define ALT_CLKMGR_INTER_MAINPLLACHIEVED_LSB 0 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_INTER_MAINPLLACHIEVED register field. */ +#define ALT_CLKMGR_INTER_MAINPLLACHIEVED_MSB 0 +/* The width in bits of the ALT_CLKMGR_INTER_MAINPLLACHIEVED register field. */ +#define ALT_CLKMGR_INTER_MAINPLLACHIEVED_WIDTH 1 +/* The mask used to set the ALT_CLKMGR_INTER_MAINPLLACHIEVED register field value. */ +#define ALT_CLKMGR_INTER_MAINPLLACHIEVED_SET_MSK 0x00000001 +/* The mask used to clear the ALT_CLKMGR_INTER_MAINPLLACHIEVED register field value. */ +#define ALT_CLKMGR_INTER_MAINPLLACHIEVED_CLR_MSK 0xfffffffe +/* The reset value of the ALT_CLKMGR_INTER_MAINPLLACHIEVED register field. */ +#define ALT_CLKMGR_INTER_MAINPLLACHIEVED_RESET 0x0 +/* Extracts the ALT_CLKMGR_INTER_MAINPLLACHIEVED field value from a register. */ +#define ALT_CLKMGR_INTER_MAINPLLACHIEVED_GET(value) (((value) & 0x00000001) >> 0) +/* Produces a ALT_CLKMGR_INTER_MAINPLLACHIEVED register field value suitable for setting the register. */ +#define ALT_CLKMGR_INTER_MAINPLLACHIEVED_SET(value) (((value) << 0) & 0x00000001) + +/* + * Field : Peripheral PLL Achieved Lock - perpllachieved + * + * If 1, the Peripheral PLL has achieved lock at least once since this bit was + * cleared. If 0, the Peripheral PLL has not achieved lock since this bit was + * cleared. + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_INTER_PERPLLACHIEVED register field. */ +#define ALT_CLKMGR_INTER_PERPLLACHIEVED_LSB 1 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_INTER_PERPLLACHIEVED register field. */ +#define ALT_CLKMGR_INTER_PERPLLACHIEVED_MSB 1 +/* The width in bits of the ALT_CLKMGR_INTER_PERPLLACHIEVED register field. */ +#define ALT_CLKMGR_INTER_PERPLLACHIEVED_WIDTH 1 +/* The mask used to set the ALT_CLKMGR_INTER_PERPLLACHIEVED register field value. */ +#define ALT_CLKMGR_INTER_PERPLLACHIEVED_SET_MSK 0x00000002 +/* The mask used to clear the ALT_CLKMGR_INTER_PERPLLACHIEVED register field value. */ +#define ALT_CLKMGR_INTER_PERPLLACHIEVED_CLR_MSK 0xfffffffd +/* The reset value of the ALT_CLKMGR_INTER_PERPLLACHIEVED register field. */ +#define ALT_CLKMGR_INTER_PERPLLACHIEVED_RESET 0x0 +/* Extracts the ALT_CLKMGR_INTER_PERPLLACHIEVED field value from a register. */ +#define ALT_CLKMGR_INTER_PERPLLACHIEVED_GET(value) (((value) & 0x00000002) >> 1) +/* Produces a ALT_CLKMGR_INTER_PERPLLACHIEVED register field value suitable for setting the register. */ +#define ALT_CLKMGR_INTER_PERPLLACHIEVED_SET(value) (((value) << 1) & 0x00000002) + +/* + * Field : SDRAM PLL Achieved Lock - sdrpllachieved + * + * If 1, the SDRAM PLL has achieved lock at least once since this bit was cleared. + * If 0, the SDRAM PLL has not achieved lock since this bit was cleared. + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_INTER_SDRPLLACHIEVED register field. */ +#define ALT_CLKMGR_INTER_SDRPLLACHIEVED_LSB 2 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_INTER_SDRPLLACHIEVED register field. */ +#define ALT_CLKMGR_INTER_SDRPLLACHIEVED_MSB 2 +/* The width in bits of the ALT_CLKMGR_INTER_SDRPLLACHIEVED register field. */ +#define ALT_CLKMGR_INTER_SDRPLLACHIEVED_WIDTH 1 +/* The mask used to set the ALT_CLKMGR_INTER_SDRPLLACHIEVED register field value. */ +#define ALT_CLKMGR_INTER_SDRPLLACHIEVED_SET_MSK 0x00000004 +/* The mask used to clear the ALT_CLKMGR_INTER_SDRPLLACHIEVED register field value. */ +#define ALT_CLKMGR_INTER_SDRPLLACHIEVED_CLR_MSK 0xfffffffb +/* The reset value of the ALT_CLKMGR_INTER_SDRPLLACHIEVED register field. */ +#define ALT_CLKMGR_INTER_SDRPLLACHIEVED_RESET 0x0 +/* Extracts the ALT_CLKMGR_INTER_SDRPLLACHIEVED field value from a register. */ +#define ALT_CLKMGR_INTER_SDRPLLACHIEVED_GET(value) (((value) & 0x00000004) >> 2) +/* Produces a ALT_CLKMGR_INTER_SDRPLLACHIEVED register field value suitable for setting the register. */ +#define ALT_CLKMGR_INTER_SDRPLLACHIEVED_SET(value) (((value) << 2) & 0x00000004) + +/* + * Field : Main PLL Lost Lock - mainplllost + * + * If 1, the Main PLL has lost lock at least once since this bit was cleared. If 0, + * the Main PLL has not lost lock since this bit was cleared. + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_INTER_MAINPLLLOST register field. */ +#define ALT_CLKMGR_INTER_MAINPLLLOST_LSB 3 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_INTER_MAINPLLLOST register field. */ +#define ALT_CLKMGR_INTER_MAINPLLLOST_MSB 3 +/* The width in bits of the ALT_CLKMGR_INTER_MAINPLLLOST register field. */ +#define ALT_CLKMGR_INTER_MAINPLLLOST_WIDTH 1 +/* The mask used to set the ALT_CLKMGR_INTER_MAINPLLLOST register field value. */ +#define ALT_CLKMGR_INTER_MAINPLLLOST_SET_MSK 0x00000008 +/* The mask used to clear the ALT_CLKMGR_INTER_MAINPLLLOST register field value. */ +#define ALT_CLKMGR_INTER_MAINPLLLOST_CLR_MSK 0xfffffff7 +/* The reset value of the ALT_CLKMGR_INTER_MAINPLLLOST register field. */ +#define ALT_CLKMGR_INTER_MAINPLLLOST_RESET 0x0 +/* Extracts the ALT_CLKMGR_INTER_MAINPLLLOST field value from a register. */ +#define ALT_CLKMGR_INTER_MAINPLLLOST_GET(value) (((value) & 0x00000008) >> 3) +/* Produces a ALT_CLKMGR_INTER_MAINPLLLOST register field value suitable for setting the register. */ +#define ALT_CLKMGR_INTER_MAINPLLLOST_SET(value) (((value) << 3) & 0x00000008) + +/* + * Field : Peripheral PLL Lost Lock - perplllost + * + * If 1, the Peripheral PLL has lost lock at least once since this bit was cleared. + * If 0, the Peripheral PLL has not lost lock since this bit was cleared. + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_INTER_PERPLLLOST register field. */ +#define ALT_CLKMGR_INTER_PERPLLLOST_LSB 4 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_INTER_PERPLLLOST register field. */ +#define ALT_CLKMGR_INTER_PERPLLLOST_MSB 4 +/* The width in bits of the ALT_CLKMGR_INTER_PERPLLLOST register field. */ +#define ALT_CLKMGR_INTER_PERPLLLOST_WIDTH 1 +/* The mask used to set the ALT_CLKMGR_INTER_PERPLLLOST register field value. */ +#define ALT_CLKMGR_INTER_PERPLLLOST_SET_MSK 0x00000010 +/* The mask used to clear the ALT_CLKMGR_INTER_PERPLLLOST register field value. */ +#define ALT_CLKMGR_INTER_PERPLLLOST_CLR_MSK 0xffffffef +/* The reset value of the ALT_CLKMGR_INTER_PERPLLLOST register field. */ +#define ALT_CLKMGR_INTER_PERPLLLOST_RESET 0x0 +/* Extracts the ALT_CLKMGR_INTER_PERPLLLOST field value from a register. */ +#define ALT_CLKMGR_INTER_PERPLLLOST_GET(value) (((value) & 0x00000010) >> 4) +/* Produces a ALT_CLKMGR_INTER_PERPLLLOST register field value suitable for setting the register. */ +#define ALT_CLKMGR_INTER_PERPLLLOST_SET(value) (((value) << 4) & 0x00000010) + +/* + * Field : SDRAM PLL Lost Lock - sdrplllost + * + * If 1, the SDRAM PLL has lost lock at least once since this bit was cleared. If + * 0, the SDRAM PLL has not lost lock since this bit was cleared. + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_INTER_SDRPLLLOST register field. */ +#define ALT_CLKMGR_INTER_SDRPLLLOST_LSB 5 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_INTER_SDRPLLLOST register field. */ +#define ALT_CLKMGR_INTER_SDRPLLLOST_MSB 5 +/* The width in bits of the ALT_CLKMGR_INTER_SDRPLLLOST register field. */ +#define ALT_CLKMGR_INTER_SDRPLLLOST_WIDTH 1 +/* The mask used to set the ALT_CLKMGR_INTER_SDRPLLLOST register field value. */ +#define ALT_CLKMGR_INTER_SDRPLLLOST_SET_MSK 0x00000020 +/* The mask used to clear the ALT_CLKMGR_INTER_SDRPLLLOST register field value. */ +#define ALT_CLKMGR_INTER_SDRPLLLOST_CLR_MSK 0xffffffdf +/* The reset value of the ALT_CLKMGR_INTER_SDRPLLLOST register field. */ +#define ALT_CLKMGR_INTER_SDRPLLLOST_RESET 0x0 +/* Extracts the ALT_CLKMGR_INTER_SDRPLLLOST field value from a register. */ +#define ALT_CLKMGR_INTER_SDRPLLLOST_GET(value) (((value) & 0x00000020) >> 5) +/* Produces a ALT_CLKMGR_INTER_SDRPLLLOST register field value suitable for setting the register. */ +#define ALT_CLKMGR_INTER_SDRPLLLOST_SET(value) (((value) << 5) & 0x00000020) + +/* + * Field : Main PLL Current Lock Status - mainplllocked + * + * If 1, the Main PLL is currently locked. If 0, the Main PLL is currently not + * locked. + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_INTER_MAINPLLLOCKED register field. */ +#define ALT_CLKMGR_INTER_MAINPLLLOCKED_LSB 6 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_INTER_MAINPLLLOCKED register field. */ +#define ALT_CLKMGR_INTER_MAINPLLLOCKED_MSB 6 +/* The width in bits of the ALT_CLKMGR_INTER_MAINPLLLOCKED register field. */ +#define ALT_CLKMGR_INTER_MAINPLLLOCKED_WIDTH 1 +/* The mask used to set the ALT_CLKMGR_INTER_MAINPLLLOCKED register field value. */ +#define ALT_CLKMGR_INTER_MAINPLLLOCKED_SET_MSK 0x00000040 +/* The mask used to clear the ALT_CLKMGR_INTER_MAINPLLLOCKED register field value. */ +#define ALT_CLKMGR_INTER_MAINPLLLOCKED_CLR_MSK 0xffffffbf +/* The reset value of the ALT_CLKMGR_INTER_MAINPLLLOCKED register field is UNKNOWN. */ +#define ALT_CLKMGR_INTER_MAINPLLLOCKED_RESET 0x0 +/* Extracts the ALT_CLKMGR_INTER_MAINPLLLOCKED field value from a register. */ +#define ALT_CLKMGR_INTER_MAINPLLLOCKED_GET(value) (((value) & 0x00000040) >> 6) +/* Produces a ALT_CLKMGR_INTER_MAINPLLLOCKED register field value suitable for setting the register. */ +#define ALT_CLKMGR_INTER_MAINPLLLOCKED_SET(value) (((value) << 6) & 0x00000040) + +/* + * Field : Peripheral PLL Current Lock Status - perplllocked + * + * If 1, the Peripheral PLL is currently locked. If 0, the Peripheral PLL is + * currently not locked. + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_INTER_PERPLLLOCKED register field. */ +#define ALT_CLKMGR_INTER_PERPLLLOCKED_LSB 7 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_INTER_PERPLLLOCKED register field. */ +#define ALT_CLKMGR_INTER_PERPLLLOCKED_MSB 7 +/* The width in bits of the ALT_CLKMGR_INTER_PERPLLLOCKED register field. */ +#define ALT_CLKMGR_INTER_PERPLLLOCKED_WIDTH 1 +/* The mask used to set the ALT_CLKMGR_INTER_PERPLLLOCKED register field value. */ +#define ALT_CLKMGR_INTER_PERPLLLOCKED_SET_MSK 0x00000080 +/* The mask used to clear the ALT_CLKMGR_INTER_PERPLLLOCKED register field value. */ +#define ALT_CLKMGR_INTER_PERPLLLOCKED_CLR_MSK 0xffffff7f +/* The reset value of the ALT_CLKMGR_INTER_PERPLLLOCKED register field is UNKNOWN. */ +#define ALT_CLKMGR_INTER_PERPLLLOCKED_RESET 0x0 +/* Extracts the ALT_CLKMGR_INTER_PERPLLLOCKED field value from a register. */ +#define ALT_CLKMGR_INTER_PERPLLLOCKED_GET(value) (((value) & 0x00000080) >> 7) +/* Produces a ALT_CLKMGR_INTER_PERPLLLOCKED register field value suitable for setting the register. */ +#define ALT_CLKMGR_INTER_PERPLLLOCKED_SET(value) (((value) << 7) & 0x00000080) + +/* + * Field : SDRAM PLL Current Lock Status - sdrplllocked + * + * If 1, the SDRAM PLL is currently locked. If 0, the SDRAM PLL is currently not + * locked. + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_INTER_SDRPLLLOCKED register field. */ +#define ALT_CLKMGR_INTER_SDRPLLLOCKED_LSB 8 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_INTER_SDRPLLLOCKED register field. */ +#define ALT_CLKMGR_INTER_SDRPLLLOCKED_MSB 8 +/* The width in bits of the ALT_CLKMGR_INTER_SDRPLLLOCKED register field. */ +#define ALT_CLKMGR_INTER_SDRPLLLOCKED_WIDTH 1 +/* The mask used to set the ALT_CLKMGR_INTER_SDRPLLLOCKED register field value. */ +#define ALT_CLKMGR_INTER_SDRPLLLOCKED_SET_MSK 0x00000100 +/* The mask used to clear the ALT_CLKMGR_INTER_SDRPLLLOCKED register field value. */ +#define ALT_CLKMGR_INTER_SDRPLLLOCKED_CLR_MSK 0xfffffeff +/* The reset value of the ALT_CLKMGR_INTER_SDRPLLLOCKED register field is UNKNOWN. */ +#define ALT_CLKMGR_INTER_SDRPLLLOCKED_RESET 0x0 +/* Extracts the ALT_CLKMGR_INTER_SDRPLLLOCKED field value from a register. */ +#define ALT_CLKMGR_INTER_SDRPLLLOCKED_GET(value) (((value) & 0x00000100) >> 8) +/* Produces a ALT_CLKMGR_INTER_SDRPLLLOCKED register field value suitable for setting the register. */ +#define ALT_CLKMGR_INTER_SDRPLLLOCKED_SET(value) (((value) << 8) & 0x00000100) + +#ifndef __ASSEMBLY__ +/* + * WARNING: The C register and register group struct declarations are provided for + * convenience and illustrative purposes. They should, however, be used with + * caution as the C language standard provides no guarantees about the alignment or + * atomicity of device memory accesses. The recommended practice for writing + * hardware drivers is to use the SoCAL access macros and alt_read_word() and + * alt_write_word() functions. + * + * The struct declaration for register ALT_CLKMGR_INTER. + */ +struct ALT_CLKMGR_INTER_s +{ + uint32_t mainpllachieved : 1; /* Main PLL Achieved Lock */ + uint32_t perpllachieved : 1; /* Peripheral PLL Achieved Lock */ + uint32_t sdrpllachieved : 1; /* SDRAM PLL Achieved Lock */ + uint32_t mainplllost : 1; /* Main PLL Lost Lock */ + uint32_t perplllost : 1; /* Peripheral PLL Lost Lock */ + uint32_t sdrplllost : 1; /* SDRAM PLL Lost Lock */ + const uint32_t mainplllocked : 1; /* Main PLL Current Lock Status */ + const uint32_t perplllocked : 1; /* Peripheral PLL Current Lock Status */ + const uint32_t sdrplllocked : 1; /* SDRAM PLL Current Lock Status */ + uint32_t : 23; /* *UNDEFINED* */ +}; + +/* The typedef declaration for register ALT_CLKMGR_INTER. */ +typedef volatile struct ALT_CLKMGR_INTER_s ALT_CLKMGR_INTER_t; +#endif /* __ASSEMBLY__ */ + +/* The byte offset of the ALT_CLKMGR_INTER register from the beginning of the component. */ +#define ALT_CLKMGR_INTER_OFST 0x8 + +/* + * Register : Interrupt Enable Register - intren + * + * Contain fields that enable the interrupt. + * + * Fields are only reset by a cold reset. + * + * Register Layout + * + * Bits | Access | Reset | Description + * :-------|:-------|:------|:---------------------------------------------- + * [0] | RW | 0x0 | Main PLL Achieved Lock Interrupt Enable + * [1] | RW | 0x0 | Peripheral PLL Achieved Lock Interrupt Enable + * [2] | RW | 0x0 | SDRAM PLL Achieved Lock Interrupt Enable + * [3] | RW | 0x0 | Main PLL Achieved Lock Interrupt Enable + * [4] | RW | 0x0 | Peripheral PLL Achieved Lock Interrupt Enable + * [5] | RW | 0x0 | SDRAM PLL Achieved Lock Interrupt Enable + * [31:6] | ??? | 0x0 | *UNDEFINED* + * + */ +/* + * Field : Main PLL Achieved Lock Interrupt Enable - mainpllachieved + * + * When set to 1, the Main PLL achieved lock bit is ORed into the Clock Manager + * interrupt output. When set to 0 the Main PLL achieved lock bit is not ORed into + * the Clock Manager interrupt output. + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_INTREN_MAINPLLACHIEVED register field. */ +#define ALT_CLKMGR_INTREN_MAINPLLACHIEVED_LSB 0 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_INTREN_MAINPLLACHIEVED register field. */ +#define ALT_CLKMGR_INTREN_MAINPLLACHIEVED_MSB 0 +/* The width in bits of the ALT_CLKMGR_INTREN_MAINPLLACHIEVED register field. */ +#define ALT_CLKMGR_INTREN_MAINPLLACHIEVED_WIDTH 1 +/* The mask used to set the ALT_CLKMGR_INTREN_MAINPLLACHIEVED register field value. */ +#define ALT_CLKMGR_INTREN_MAINPLLACHIEVED_SET_MSK 0x00000001 +/* The mask used to clear the ALT_CLKMGR_INTREN_MAINPLLACHIEVED register field value. */ +#define ALT_CLKMGR_INTREN_MAINPLLACHIEVED_CLR_MSK 0xfffffffe +/* The reset value of the ALT_CLKMGR_INTREN_MAINPLLACHIEVED register field. */ +#define ALT_CLKMGR_INTREN_MAINPLLACHIEVED_RESET 0x0 +/* Extracts the ALT_CLKMGR_INTREN_MAINPLLACHIEVED field value from a register. */ +#define ALT_CLKMGR_INTREN_MAINPLLACHIEVED_GET(value) (((value) & 0x00000001) >> 0) +/* Produces a ALT_CLKMGR_INTREN_MAINPLLACHIEVED register field value suitable for setting the register. */ +#define ALT_CLKMGR_INTREN_MAINPLLACHIEVED_SET(value) (((value) << 0) & 0x00000001) + +/* + * Field : Peripheral PLL Achieved Lock Interrupt Enable - perpllachieved + * + * When set to 1, the Peripheral PLL achieved lock bit is ORed into the Clock + * Manager interrupt output. When set to 0 the Peripheral PLL achieved lock bit is + * not ORed into the Clock Manager interrupt output. + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_INTREN_PERPLLACHIEVED register field. */ +#define ALT_CLKMGR_INTREN_PERPLLACHIEVED_LSB 1 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_INTREN_PERPLLACHIEVED register field. */ +#define ALT_CLKMGR_INTREN_PERPLLACHIEVED_MSB 1 +/* The width in bits of the ALT_CLKMGR_INTREN_PERPLLACHIEVED register field. */ +#define ALT_CLKMGR_INTREN_PERPLLACHIEVED_WIDTH 1 +/* The mask used to set the ALT_CLKMGR_INTREN_PERPLLACHIEVED register field value. */ +#define ALT_CLKMGR_INTREN_PERPLLACHIEVED_SET_MSK 0x00000002 +/* The mask used to clear the ALT_CLKMGR_INTREN_PERPLLACHIEVED register field value. */ +#define ALT_CLKMGR_INTREN_PERPLLACHIEVED_CLR_MSK 0xfffffffd +/* The reset value of the ALT_CLKMGR_INTREN_PERPLLACHIEVED register field. */ +#define ALT_CLKMGR_INTREN_PERPLLACHIEVED_RESET 0x0 +/* Extracts the ALT_CLKMGR_INTREN_PERPLLACHIEVED field value from a register. */ +#define ALT_CLKMGR_INTREN_PERPLLACHIEVED_GET(value) (((value) & 0x00000002) >> 1) +/* Produces a ALT_CLKMGR_INTREN_PERPLLACHIEVED register field value suitable for setting the register. */ +#define ALT_CLKMGR_INTREN_PERPLLACHIEVED_SET(value) (((value) << 1) & 0x00000002) + +/* + * Field : SDRAM PLL Achieved Lock Interrupt Enable - sdrpllachieved + * + * When set to 1, the SDRAM PLL achieved lock bit is ORed into the Clock Manager + * interrupt output. When set to 0 the SDRAM PLL achieved lock bit is not ORed + * into the Clock Manager interrupt output. + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_INTREN_SDRPLLACHIEVED register field. */ +#define ALT_CLKMGR_INTREN_SDRPLLACHIEVED_LSB 2 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_INTREN_SDRPLLACHIEVED register field. */ +#define ALT_CLKMGR_INTREN_SDRPLLACHIEVED_MSB 2 +/* The width in bits of the ALT_CLKMGR_INTREN_SDRPLLACHIEVED register field. */ +#define ALT_CLKMGR_INTREN_SDRPLLACHIEVED_WIDTH 1 +/* The mask used to set the ALT_CLKMGR_INTREN_SDRPLLACHIEVED register field value. */ +#define ALT_CLKMGR_INTREN_SDRPLLACHIEVED_SET_MSK 0x00000004 +/* The mask used to clear the ALT_CLKMGR_INTREN_SDRPLLACHIEVED register field value. */ +#define ALT_CLKMGR_INTREN_SDRPLLACHIEVED_CLR_MSK 0xfffffffb +/* The reset value of the ALT_CLKMGR_INTREN_SDRPLLACHIEVED register field. */ +#define ALT_CLKMGR_INTREN_SDRPLLACHIEVED_RESET 0x0 +/* Extracts the ALT_CLKMGR_INTREN_SDRPLLACHIEVED field value from a register. */ +#define ALT_CLKMGR_INTREN_SDRPLLACHIEVED_GET(value) (((value) & 0x00000004) >> 2) +/* Produces a ALT_CLKMGR_INTREN_SDRPLLACHIEVED register field value suitable for setting the register. */ +#define ALT_CLKMGR_INTREN_SDRPLLACHIEVED_SET(value) (((value) << 2) & 0x00000004) + +/* + * Field : Main PLL Achieved Lock Interrupt Enable - mainplllost + * + * When set to 1, the Main PLL lost lock bit is ORed into the Clock Manager + * interrupt output. When set to 0 the Main PLL lost lock bit is not ORed into the + * Clock Manager interrupt output. + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_INTREN_MAINPLLLOST register field. */ +#define ALT_CLKMGR_INTREN_MAINPLLLOST_LSB 3 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_INTREN_MAINPLLLOST register field. */ +#define ALT_CLKMGR_INTREN_MAINPLLLOST_MSB 3 +/* The width in bits of the ALT_CLKMGR_INTREN_MAINPLLLOST register field. */ +#define ALT_CLKMGR_INTREN_MAINPLLLOST_WIDTH 1 +/* The mask used to set the ALT_CLKMGR_INTREN_MAINPLLLOST register field value. */ +#define ALT_CLKMGR_INTREN_MAINPLLLOST_SET_MSK 0x00000008 +/* The mask used to clear the ALT_CLKMGR_INTREN_MAINPLLLOST register field value. */ +#define ALT_CLKMGR_INTREN_MAINPLLLOST_CLR_MSK 0xfffffff7 +/* The reset value of the ALT_CLKMGR_INTREN_MAINPLLLOST register field. */ +#define ALT_CLKMGR_INTREN_MAINPLLLOST_RESET 0x0 +/* Extracts the ALT_CLKMGR_INTREN_MAINPLLLOST field value from a register. */ +#define ALT_CLKMGR_INTREN_MAINPLLLOST_GET(value) (((value) & 0x00000008) >> 3) +/* Produces a ALT_CLKMGR_INTREN_MAINPLLLOST register field value suitable for setting the register. */ +#define ALT_CLKMGR_INTREN_MAINPLLLOST_SET(value) (((value) << 3) & 0x00000008) + +/* + * Field : Peripheral PLL Achieved Lock Interrupt Enable - perplllost + * + * When set to 1, the Peripheral PLL lost lock bit is ORed into the Clock Manager + * interrupt output. When set to 0 the Peripheral PLL lost lock bit is not ORed + * into the Clock Manager interrupt output. + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_INTREN_PERPLLLOST register field. */ +#define ALT_CLKMGR_INTREN_PERPLLLOST_LSB 4 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_INTREN_PERPLLLOST register field. */ +#define ALT_CLKMGR_INTREN_PERPLLLOST_MSB 4 +/* The width in bits of the ALT_CLKMGR_INTREN_PERPLLLOST register field. */ +#define ALT_CLKMGR_INTREN_PERPLLLOST_WIDTH 1 +/* The mask used to set the ALT_CLKMGR_INTREN_PERPLLLOST register field value. */ +#define ALT_CLKMGR_INTREN_PERPLLLOST_SET_MSK 0x00000010 +/* The mask used to clear the ALT_CLKMGR_INTREN_PERPLLLOST register field value. */ +#define ALT_CLKMGR_INTREN_PERPLLLOST_CLR_MSK 0xffffffef +/* The reset value of the ALT_CLKMGR_INTREN_PERPLLLOST register field. */ +#define ALT_CLKMGR_INTREN_PERPLLLOST_RESET 0x0 +/* Extracts the ALT_CLKMGR_INTREN_PERPLLLOST field value from a register. */ +#define ALT_CLKMGR_INTREN_PERPLLLOST_GET(value) (((value) & 0x00000010) >> 4) +/* Produces a ALT_CLKMGR_INTREN_PERPLLLOST register field value suitable for setting the register. */ +#define ALT_CLKMGR_INTREN_PERPLLLOST_SET(value) (((value) << 4) & 0x00000010) + +/* + * Field : SDRAM PLL Achieved Lock Interrupt Enable - sdrplllost + * + * When set to 1, the SDRAM PLL lost lock bit is ORed into the Clock Manager + * interrupt output. When set to 0 the SDRAM PLL lost lock bit is not ORed into + * the Clock Manager interrupt output. + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_INTREN_SDRPLLLOST register field. */ +#define ALT_CLKMGR_INTREN_SDRPLLLOST_LSB 5 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_INTREN_SDRPLLLOST register field. */ +#define ALT_CLKMGR_INTREN_SDRPLLLOST_MSB 5 +/* The width in bits of the ALT_CLKMGR_INTREN_SDRPLLLOST register field. */ +#define ALT_CLKMGR_INTREN_SDRPLLLOST_WIDTH 1 +/* The mask used to set the ALT_CLKMGR_INTREN_SDRPLLLOST register field value. */ +#define ALT_CLKMGR_INTREN_SDRPLLLOST_SET_MSK 0x00000020 +/* The mask used to clear the ALT_CLKMGR_INTREN_SDRPLLLOST register field value. */ +#define ALT_CLKMGR_INTREN_SDRPLLLOST_CLR_MSK 0xffffffdf +/* The reset value of the ALT_CLKMGR_INTREN_SDRPLLLOST register field. */ +#define ALT_CLKMGR_INTREN_SDRPLLLOST_RESET 0x0 +/* Extracts the ALT_CLKMGR_INTREN_SDRPLLLOST field value from a register. */ +#define ALT_CLKMGR_INTREN_SDRPLLLOST_GET(value) (((value) & 0x00000020) >> 5) +/* Produces a ALT_CLKMGR_INTREN_SDRPLLLOST register field value suitable for setting the register. */ +#define ALT_CLKMGR_INTREN_SDRPLLLOST_SET(value) (((value) << 5) & 0x00000020) + +#ifndef __ASSEMBLY__ +/* + * WARNING: The C register and register group struct declarations are provided for + * convenience and illustrative purposes. They should, however, be used with + * caution as the C language standard provides no guarantees about the alignment or + * atomicity of device memory accesses. The recommended practice for writing + * hardware drivers is to use the SoCAL access macros and alt_read_word() and + * alt_write_word() functions. + * + * The struct declaration for register ALT_CLKMGR_INTREN. + */ +struct ALT_CLKMGR_INTREN_s +{ + uint32_t mainpllachieved : 1; /* Main PLL Achieved Lock Interrupt Enable */ + uint32_t perpllachieved : 1; /* Peripheral PLL Achieved Lock Interrupt Enable */ + uint32_t sdrpllachieved : 1; /* SDRAM PLL Achieved Lock Interrupt Enable */ + uint32_t mainplllost : 1; /* Main PLL Achieved Lock Interrupt Enable */ + uint32_t perplllost : 1; /* Peripheral PLL Achieved Lock Interrupt Enable */ + uint32_t sdrplllost : 1; /* SDRAM PLL Achieved Lock Interrupt Enable */ + uint32_t : 26; /* *UNDEFINED* */ +}; + +/* The typedef declaration for register ALT_CLKMGR_INTREN. */ +typedef volatile struct ALT_CLKMGR_INTREN_s ALT_CLKMGR_INTREN_t; +#endif /* __ASSEMBLY__ */ + +/* The byte offset of the ALT_CLKMGR_INTREN register from the beginning of the component. */ +#define ALT_CLKMGR_INTREN_OFST 0xc + +/* + * Register : Debug clock Control Register - dbctrl + * + * Contains fields that control the debug clocks. + * + * Register Layout + * + * Bits | Access | Reset | Description + * :-------|:-------|:------|:------------------------------- + * [0] | RW | 0x1 | Debug Clocks Stay on EOSC1_CLK + * [1] | RW | 0x1 | Debug Clocks Enable Safe Mode + * [31:2] | ??? | 0x0 | *UNDEFINED* + * + */ +/* + * Field : Debug Clocks Stay on EOSC1_CLK - stayosc1 + * + * When this bit is set the debug root clock (Main PLL C2 output) will always be + * bypassed to the EOSC1_clk independent of any other clock manager settings. + * When clear the debug source will be a function of register settings in the clock + * manager. Clocks affected by this bit are dbg_at_clk, dbg_clk, dbg_trace_clk, + * and dbg_timer_clk. + * + * The reset value for this bit is applied on a cold reset. Warm reset has no + * affect on this bit. + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_DBCTL_STAYOSC1 register field. */ +#define ALT_CLKMGR_DBCTL_STAYOSC1_LSB 0 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_DBCTL_STAYOSC1 register field. */ +#define ALT_CLKMGR_DBCTL_STAYOSC1_MSB 0 +/* The width in bits of the ALT_CLKMGR_DBCTL_STAYOSC1 register field. */ +#define ALT_CLKMGR_DBCTL_STAYOSC1_WIDTH 1 +/* The mask used to set the ALT_CLKMGR_DBCTL_STAYOSC1 register field value. */ +#define ALT_CLKMGR_DBCTL_STAYOSC1_SET_MSK 0x00000001 +/* The mask used to clear the ALT_CLKMGR_DBCTL_STAYOSC1 register field value. */ +#define ALT_CLKMGR_DBCTL_STAYOSC1_CLR_MSK 0xfffffffe +/* The reset value of the ALT_CLKMGR_DBCTL_STAYOSC1 register field. */ +#define ALT_CLKMGR_DBCTL_STAYOSC1_RESET 0x1 +/* Extracts the ALT_CLKMGR_DBCTL_STAYOSC1 field value from a register. */ +#define ALT_CLKMGR_DBCTL_STAYOSC1_GET(value) (((value) & 0x00000001) >> 0) +/* Produces a ALT_CLKMGR_DBCTL_STAYOSC1 register field value suitable for setting the register. */ +#define ALT_CLKMGR_DBCTL_STAYOSC1_SET(value) (((value) << 0) & 0x00000001) + +/* + * Field : Debug Clocks Enable Safe Mode - ensfmdwr + * + * When this bit is set the debug clocks will be affected by the assertion of Safe + * Mode on a warm reset if Stay OSC1 is not set. + * + * When this bit is clear the debug clocks will not be affected by the assertion of + * Safe Mode on a warm reset. + * + * If Debug Clocks are in Safe Mode they are taken out of Safe Mode when the Safe + * Mode bit is cleared independent of this bit.The reset value of this bit is + * applied on a cold reset; warm reset has no affect on this bit. + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_DBCTL_ENSFMDWR register field. */ +#define ALT_CLKMGR_DBCTL_ENSFMDWR_LSB 1 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_DBCTL_ENSFMDWR register field. */ +#define ALT_CLKMGR_DBCTL_ENSFMDWR_MSB 1 +/* The width in bits of the ALT_CLKMGR_DBCTL_ENSFMDWR register field. */ +#define ALT_CLKMGR_DBCTL_ENSFMDWR_WIDTH 1 +/* The mask used to set the ALT_CLKMGR_DBCTL_ENSFMDWR register field value. */ +#define ALT_CLKMGR_DBCTL_ENSFMDWR_SET_MSK 0x00000002 +/* The mask used to clear the ALT_CLKMGR_DBCTL_ENSFMDWR register field value. */ +#define ALT_CLKMGR_DBCTL_ENSFMDWR_CLR_MSK 0xfffffffd +/* The reset value of the ALT_CLKMGR_DBCTL_ENSFMDWR register field. */ +#define ALT_CLKMGR_DBCTL_ENSFMDWR_RESET 0x1 +/* Extracts the ALT_CLKMGR_DBCTL_ENSFMDWR field value from a register. */ +#define ALT_CLKMGR_DBCTL_ENSFMDWR_GET(value) (((value) & 0x00000002) >> 1) +/* Produces a ALT_CLKMGR_DBCTL_ENSFMDWR register field value suitable for setting the register. */ +#define ALT_CLKMGR_DBCTL_ENSFMDWR_SET(value) (((value) << 1) & 0x00000002) + +#ifndef __ASSEMBLY__ +/* + * WARNING: The C register and register group struct declarations are provided for + * convenience and illustrative purposes. They should, however, be used with + * caution as the C language standard provides no guarantees about the alignment or + * atomicity of device memory accesses. The recommended practice for writing + * hardware drivers is to use the SoCAL access macros and alt_read_word() and + * alt_write_word() functions. + * + * The struct declaration for register ALT_CLKMGR_DBCTL. + */ +struct ALT_CLKMGR_DBCTL_s +{ + uint32_t stayosc1 : 1; /* Debug Clocks Stay on EOSC1_CLK */ + uint32_t ensfmdwr : 1; /* Debug Clocks Enable Safe Mode */ + uint32_t : 30; /* *UNDEFINED* */ +}; + +/* The typedef declaration for register ALT_CLKMGR_DBCTL. */ +typedef volatile struct ALT_CLKMGR_DBCTL_s ALT_CLKMGR_DBCTL_t; +#endif /* __ASSEMBLY__ */ + +/* The byte offset of the ALT_CLKMGR_DBCTL register from the beginning of the component. */ +#define ALT_CLKMGR_DBCTL_OFST 0x10 + +/* + * Register : Status Register - stat + * + * Provides status of Hardware Managed Clock transition State Machine. + * + * Register Layout + * + * Bits | Access | Reset | Description + * :-------|:-------|:------|:----------------------- + * [0] | R | 0x0 | HW Managed Clocks BUSY + * [31:1] | ??? | 0x0 | *UNDEFINED* + * + */ +/* + * Field : HW Managed Clocks BUSY - busy + * + * This read only bit indicates that the Hardware Managed clock's state machine is + * active. If the state machine is active, then the clocks are in transition. + * Software should poll this bit after changing the source of internal clocks when + * writing to the BYPASS, CTRL or DBCTRL registers. Immediately following writes + * to any of these registers, SW should wait until this bit is IDLE before + * proceeding with any other register writes in the Clock Manager. + * + * The reset value of this bit is applied on a cold reset; warm reset has no affect + * on this bit. + * + * Field Enumeration Values: + * + * Enum | Value | Description + * :----------------------------|:------|:--------------------- + * ALT_CLKMGR_STAT_BUSY_E_IDLE | 0x0 | Clocks stable + * ALT_CLKMGR_STAT_BUSY_E_BUSY | 0x1 | Clocks in transition + * + * Field Access Macros: + * + */ +/* + * Enumerated value for register field ALT_CLKMGR_STAT_BUSY + * + * Clocks stable + */ +#define ALT_CLKMGR_STAT_BUSY_E_IDLE 0x0 +/* + * Enumerated value for register field ALT_CLKMGR_STAT_BUSY + * + * Clocks in transition + */ +#define ALT_CLKMGR_STAT_BUSY_E_BUSY 0x1 + +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_STAT_BUSY register field. */ +#define ALT_CLKMGR_STAT_BUSY_LSB 0 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_STAT_BUSY register field. */ +#define ALT_CLKMGR_STAT_BUSY_MSB 0 +/* The width in bits of the ALT_CLKMGR_STAT_BUSY register field. */ +#define ALT_CLKMGR_STAT_BUSY_WIDTH 1 +/* The mask used to set the ALT_CLKMGR_STAT_BUSY register field value. */ +#define ALT_CLKMGR_STAT_BUSY_SET_MSK 0x00000001 +/* The mask used to clear the ALT_CLKMGR_STAT_BUSY register field value. */ +#define ALT_CLKMGR_STAT_BUSY_CLR_MSK 0xfffffffe +/* The reset value of the ALT_CLKMGR_STAT_BUSY register field. */ +#define ALT_CLKMGR_STAT_BUSY_RESET 0x0 +/* Extracts the ALT_CLKMGR_STAT_BUSY field value from a register. */ +#define ALT_CLKMGR_STAT_BUSY_GET(value) (((value) & 0x00000001) >> 0) +/* Produces a ALT_CLKMGR_STAT_BUSY register field value suitable for setting the register. */ +#define ALT_CLKMGR_STAT_BUSY_SET(value) (((value) << 0) & 0x00000001) + +#ifndef __ASSEMBLY__ +/* + * WARNING: The C register and register group struct declarations are provided for + * convenience and illustrative purposes. They should, however, be used with + * caution as the C language standard provides no guarantees about the alignment or + * atomicity of device memory accesses. The recommended practice for writing + * hardware drivers is to use the SoCAL access macros and alt_read_word() and + * alt_write_word() functions. + * + * The struct declaration for register ALT_CLKMGR_STAT. + */ +struct ALT_CLKMGR_STAT_s +{ + const uint32_t busy : 1; /* HW Managed Clocks BUSY */ + uint32_t : 31; /* *UNDEFINED* */ +}; + +/* The typedef declaration for register ALT_CLKMGR_STAT. */ +typedef volatile struct ALT_CLKMGR_STAT_s ALT_CLKMGR_STAT_t; +#endif /* __ASSEMBLY__ */ + +/* The byte offset of the ALT_CLKMGR_STAT register from the beginning of the component. */ +#define ALT_CLKMGR_STAT_OFST 0x14 + +/* + * Register Group : Main PLL Group - ALT_CLKMGR_MAINPLL + * Main PLL Group + * + * Contains registers with settings for the Main PLL. + * + */ +/* + * Register : Main PLL VCO Control Register - vco + * + * Contains settings that control the Main PLL VCO. The VCO output frequency is the + * input frequency multiplied by the numerator (M+1) and divided by the denominator + * (N+1). The VCO input clock source is always eosc1_clk. + * + * Fields are only reset by a cold reset. + * + * Register Layout + * + * Bits | Access | Reset | Description + * :--------|:-------|:------|:-------------------------------- + * [0] | RW | 0x1 | BG PWRDN + * [1] | RW | 0x0 | Enable + * [2] | RW | 0x1 | Power down + * [15:3] | RW | 0x1 | Numerator (M) + * [21:16] | RW | 0x1 | Denominator (N) + * [23:22] | ??? | 0x0 | *UNDEFINED* + * [24] | RW | 0x0 | All Output Counter Reset + * [30:25] | RW | 0x0 | Output Counter Reset + * [31] | RW | 0x1 | External Regulator Input Select + * + */ +/* + * Field : BG PWRDN - bgpwrdn + * + * If '1', powers down bandgap. If '0', bandgap is not power down. + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_MAINPLL_VCO_BGPWRDN register field. */ +#define ALT_CLKMGR_MAINPLL_VCO_BGPWRDN_LSB 0 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_MAINPLL_VCO_BGPWRDN register field. */ +#define ALT_CLKMGR_MAINPLL_VCO_BGPWRDN_MSB 0 +/* The width in bits of the ALT_CLKMGR_MAINPLL_VCO_BGPWRDN register field. */ +#define ALT_CLKMGR_MAINPLL_VCO_BGPWRDN_WIDTH 1 +/* The mask used to set the ALT_CLKMGR_MAINPLL_VCO_BGPWRDN register field value. */ +#define ALT_CLKMGR_MAINPLL_VCO_BGPWRDN_SET_MSK 0x00000001 +/* The mask used to clear the ALT_CLKMGR_MAINPLL_VCO_BGPWRDN register field value. */ +#define ALT_CLKMGR_MAINPLL_VCO_BGPWRDN_CLR_MSK 0xfffffffe +/* The reset value of the ALT_CLKMGR_MAINPLL_VCO_BGPWRDN register field. */ +#define ALT_CLKMGR_MAINPLL_VCO_BGPWRDN_RESET 0x1 +/* Extracts the ALT_CLKMGR_MAINPLL_VCO_BGPWRDN field value from a register. */ +#define ALT_CLKMGR_MAINPLL_VCO_BGPWRDN_GET(value) (((value) & 0x00000001) >> 0) +/* Produces a ALT_CLKMGR_MAINPLL_VCO_BGPWRDN register field value suitable for setting the register. */ +#define ALT_CLKMGR_MAINPLL_VCO_BGPWRDN_SET(value) (((value) << 0) & 0x00000001) + +/* + * Field : Enable - en + * + * If '1', VCO is enabled. If '0', VCO is in reset. + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_MAINPLL_VCO_EN register field. */ +#define ALT_CLKMGR_MAINPLL_VCO_EN_LSB 1 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_MAINPLL_VCO_EN register field. */ +#define ALT_CLKMGR_MAINPLL_VCO_EN_MSB 1 +/* The width in bits of the ALT_CLKMGR_MAINPLL_VCO_EN register field. */ +#define ALT_CLKMGR_MAINPLL_VCO_EN_WIDTH 1 +/* The mask used to set the ALT_CLKMGR_MAINPLL_VCO_EN register field value. */ +#define ALT_CLKMGR_MAINPLL_VCO_EN_SET_MSK 0x00000002 +/* The mask used to clear the ALT_CLKMGR_MAINPLL_VCO_EN register field value. */ +#define ALT_CLKMGR_MAINPLL_VCO_EN_CLR_MSK 0xfffffffd +/* The reset value of the ALT_CLKMGR_MAINPLL_VCO_EN register field. */ +#define ALT_CLKMGR_MAINPLL_VCO_EN_RESET 0x0 +/* Extracts the ALT_CLKMGR_MAINPLL_VCO_EN field value from a register. */ +#define ALT_CLKMGR_MAINPLL_VCO_EN_GET(value) (((value) & 0x00000002) >> 1) +/* Produces a ALT_CLKMGR_MAINPLL_VCO_EN register field value suitable for setting the register. */ +#define ALT_CLKMGR_MAINPLL_VCO_EN_SET(value) (((value) << 1) & 0x00000002) + +/* + * Field : Power down - pwrdn + * + * If '1', power down analog circuitry. If '0', analog circuitry not powered down. + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_MAINPLL_VCO_PWRDN register field. */ +#define ALT_CLKMGR_MAINPLL_VCO_PWRDN_LSB 2 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_MAINPLL_VCO_PWRDN register field. */ +#define ALT_CLKMGR_MAINPLL_VCO_PWRDN_MSB 2 +/* The width in bits of the ALT_CLKMGR_MAINPLL_VCO_PWRDN register field. */ +#define ALT_CLKMGR_MAINPLL_VCO_PWRDN_WIDTH 1 +/* The mask used to set the ALT_CLKMGR_MAINPLL_VCO_PWRDN register field value. */ +#define ALT_CLKMGR_MAINPLL_VCO_PWRDN_SET_MSK 0x00000004 +/* The mask used to clear the ALT_CLKMGR_MAINPLL_VCO_PWRDN register field value. */ +#define ALT_CLKMGR_MAINPLL_VCO_PWRDN_CLR_MSK 0xfffffffb +/* The reset value of the ALT_CLKMGR_MAINPLL_VCO_PWRDN register field. */ +#define ALT_CLKMGR_MAINPLL_VCO_PWRDN_RESET 0x1 +/* Extracts the ALT_CLKMGR_MAINPLL_VCO_PWRDN field value from a register. */ +#define ALT_CLKMGR_MAINPLL_VCO_PWRDN_GET(value) (((value) & 0x00000004) >> 2) +/* Produces a ALT_CLKMGR_MAINPLL_VCO_PWRDN register field value suitable for setting the register. */ +#define ALT_CLKMGR_MAINPLL_VCO_PWRDN_SET(value) (((value) << 2) & 0x00000004) + +/* + * Field : Numerator (M) - numer + * + * Numerator in VCO output frequency equation. For incremental frequency change, if + * the new value lead to less than 20% of the frequency change, this value can be + * changed without resetting the PLL. The Numerator and Denominator can not be + * changed at the same time for incremental frequency changed. + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_MAINPLL_VCO_NUMER register field. */ +#define ALT_CLKMGR_MAINPLL_VCO_NUMER_LSB 3 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_MAINPLL_VCO_NUMER register field. */ +#define ALT_CLKMGR_MAINPLL_VCO_NUMER_MSB 15 +/* The width in bits of the ALT_CLKMGR_MAINPLL_VCO_NUMER register field. */ +#define ALT_CLKMGR_MAINPLL_VCO_NUMER_WIDTH 13 +/* The mask used to set the ALT_CLKMGR_MAINPLL_VCO_NUMER register field value. */ +#define ALT_CLKMGR_MAINPLL_VCO_NUMER_SET_MSK 0x0000fff8 +/* The mask used to clear the ALT_CLKMGR_MAINPLL_VCO_NUMER register field value. */ +#define ALT_CLKMGR_MAINPLL_VCO_NUMER_CLR_MSK 0xffff0007 +/* The reset value of the ALT_CLKMGR_MAINPLL_VCO_NUMER register field. */ +#define ALT_CLKMGR_MAINPLL_VCO_NUMER_RESET 0x1 +/* Extracts the ALT_CLKMGR_MAINPLL_VCO_NUMER field value from a register. */ +#define ALT_CLKMGR_MAINPLL_VCO_NUMER_GET(value) (((value) & 0x0000fff8) >> 3) +/* Produces a ALT_CLKMGR_MAINPLL_VCO_NUMER register field value suitable for setting the register. */ +#define ALT_CLKMGR_MAINPLL_VCO_NUMER_SET(value) (((value) << 3) & 0x0000fff8) + +/* + * Field : Denominator (N) - denom + * + * Denominator in VCO output frequency equation. For incremental frequency change, + * if the new value lead to less than 20% of the frequency change, this value can + * be changed without resetting the PLL. The Numerator and Denominator can not be + * changed at the same time for incremental frequency changed. + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_MAINPLL_VCO_DENOM register field. */ +#define ALT_CLKMGR_MAINPLL_VCO_DENOM_LSB 16 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_MAINPLL_VCO_DENOM register field. */ +#define ALT_CLKMGR_MAINPLL_VCO_DENOM_MSB 21 +/* The width in bits of the ALT_CLKMGR_MAINPLL_VCO_DENOM register field. */ +#define ALT_CLKMGR_MAINPLL_VCO_DENOM_WIDTH 6 +/* The mask used to set the ALT_CLKMGR_MAINPLL_VCO_DENOM register field value. */ +#define ALT_CLKMGR_MAINPLL_VCO_DENOM_SET_MSK 0x003f0000 +/* The mask used to clear the ALT_CLKMGR_MAINPLL_VCO_DENOM register field value. */ +#define ALT_CLKMGR_MAINPLL_VCO_DENOM_CLR_MSK 0xffc0ffff +/* The reset value of the ALT_CLKMGR_MAINPLL_VCO_DENOM register field. */ +#define ALT_CLKMGR_MAINPLL_VCO_DENOM_RESET 0x1 +/* Extracts the ALT_CLKMGR_MAINPLL_VCO_DENOM field value from a register. */ +#define ALT_CLKMGR_MAINPLL_VCO_DENOM_GET(value) (((value) & 0x003f0000) >> 16) +/* Produces a ALT_CLKMGR_MAINPLL_VCO_DENOM register field value suitable for setting the register. */ +#define ALT_CLKMGR_MAINPLL_VCO_DENOM_SET(value) (((value) << 16) & 0x003f0000) + +/* + * Field : All Output Counter Reset - outresetall + * + * Before releasing Bypass, All Output Counter Reset must be set and cleared by + * software for correct clock operation. + * + * If '1', Reset phase multiplexer and all output counter state. So that after the + * assertion all the clocks output are start from rising edge align. + * + * If '0', phase multiplexer and output counter state not reset and no change to + * the phase of the clock outputs. + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_MAINPLL_VCO_OUTRSTALL register field. */ +#define ALT_CLKMGR_MAINPLL_VCO_OUTRSTALL_LSB 24 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_MAINPLL_VCO_OUTRSTALL register field. */ +#define ALT_CLKMGR_MAINPLL_VCO_OUTRSTALL_MSB 24 +/* The width in bits of the ALT_CLKMGR_MAINPLL_VCO_OUTRSTALL register field. */ +#define ALT_CLKMGR_MAINPLL_VCO_OUTRSTALL_WIDTH 1 +/* The mask used to set the ALT_CLKMGR_MAINPLL_VCO_OUTRSTALL register field value. */ +#define ALT_CLKMGR_MAINPLL_VCO_OUTRSTALL_SET_MSK 0x01000000 +/* The mask used to clear the ALT_CLKMGR_MAINPLL_VCO_OUTRSTALL register field value. */ +#define ALT_CLKMGR_MAINPLL_VCO_OUTRSTALL_CLR_MSK 0xfeffffff +/* The reset value of the ALT_CLKMGR_MAINPLL_VCO_OUTRSTALL register field. */ +#define ALT_CLKMGR_MAINPLL_VCO_OUTRSTALL_RESET 0x0 +/* Extracts the ALT_CLKMGR_MAINPLL_VCO_OUTRSTALL field value from a register. */ +#define ALT_CLKMGR_MAINPLL_VCO_OUTRSTALL_GET(value) (((value) & 0x01000000) >> 24) +/* Produces a ALT_CLKMGR_MAINPLL_VCO_OUTRSTALL register field value suitable for setting the register. */ +#define ALT_CLKMGR_MAINPLL_VCO_OUTRSTALL_SET(value) (((value) << 24) & 0x01000000) + +/* + * Field : Output Counter Reset - outreset + * + * Resets the individual PLL output counter. + * + * For software to change the PLL output counter without producing glitches on the + * respective clock, SW must set the VCO register respective Output Counter Reset + * bit. Software then polls the respective Output Counter Reset Acknowledge bit in + * the Output Counter Reset Ack Status Register. Software then writes the + * appropriate counter register, and then clears the respective VCO register Output + * Counter Reset bit. + * + * LSB 'outreset[0]' corresponds to PLL output clock C0, etc. + * + * If set to '1', reset output divider, no clock output from counter. + * + * If set to '0', counter is not reset. + * + * The reset value of this bit is applied on a cold reset; warm reset has no affect + * on this bit. + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_MAINPLL_VCO_OUTRST register field. */ +#define ALT_CLKMGR_MAINPLL_VCO_OUTRST_LSB 25 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_MAINPLL_VCO_OUTRST register field. */ +#define ALT_CLKMGR_MAINPLL_VCO_OUTRST_MSB 30 +/* The width in bits of the ALT_CLKMGR_MAINPLL_VCO_OUTRST register field. */ +#define ALT_CLKMGR_MAINPLL_VCO_OUTRST_WIDTH 6 +/* The mask used to set the ALT_CLKMGR_MAINPLL_VCO_OUTRST register field value. */ +#define ALT_CLKMGR_MAINPLL_VCO_OUTRST_SET_MSK 0x7e000000 +/* The mask used to clear the ALT_CLKMGR_MAINPLL_VCO_OUTRST register field value. */ +#define ALT_CLKMGR_MAINPLL_VCO_OUTRST_CLR_MSK 0x81ffffff +/* The reset value of the ALT_CLKMGR_MAINPLL_VCO_OUTRST register field. */ +#define ALT_CLKMGR_MAINPLL_VCO_OUTRST_RESET 0x0 +/* Extracts the ALT_CLKMGR_MAINPLL_VCO_OUTRST field value from a register. */ +#define ALT_CLKMGR_MAINPLL_VCO_OUTRST_GET(value) (((value) & 0x7e000000) >> 25) +/* Produces a ALT_CLKMGR_MAINPLL_VCO_OUTRST register field value suitable for setting the register. */ +#define ALT_CLKMGR_MAINPLL_VCO_OUTRST_SET(value) (((value) << 25) & 0x7e000000) + +/* + * Field : External Regulator Input Select - regextsel + * + * If set to '1', the external regulator is selected for the PLL. + * + * If set to '0', the internal regulator is slected. + * + * It is strongly recommended to select the external regulator while the PLL is not + * enabled (in reset), and then disable the external regulater once the PLL + * becomes enabled. Software should simulateously update the 'Enable' bit and the + * 'External Regulator Input Select' in the same write access to the VCO register. + * When the 'Enable' bit is clear, the 'External Regulator Input Select' should be + * set, and vice versa. + * + * The reset value of this bit is applied on a cold reset; warm reset has no affect + * on this bit. + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_MAINPLL_VCO_REGEXTSEL register field. */ +#define ALT_CLKMGR_MAINPLL_VCO_REGEXTSEL_LSB 31 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_MAINPLL_VCO_REGEXTSEL register field. */ +#define ALT_CLKMGR_MAINPLL_VCO_REGEXTSEL_MSB 31 +/* The width in bits of the ALT_CLKMGR_MAINPLL_VCO_REGEXTSEL register field. */ +#define ALT_CLKMGR_MAINPLL_VCO_REGEXTSEL_WIDTH 1 +/* The mask used to set the ALT_CLKMGR_MAINPLL_VCO_REGEXTSEL register field value. */ +#define ALT_CLKMGR_MAINPLL_VCO_REGEXTSEL_SET_MSK 0x80000000 +/* The mask used to clear the ALT_CLKMGR_MAINPLL_VCO_REGEXTSEL register field value. */ +#define ALT_CLKMGR_MAINPLL_VCO_REGEXTSEL_CLR_MSK 0x7fffffff +/* The reset value of the ALT_CLKMGR_MAINPLL_VCO_REGEXTSEL register field. */ +#define ALT_CLKMGR_MAINPLL_VCO_REGEXTSEL_RESET 0x1 +/* Extracts the ALT_CLKMGR_MAINPLL_VCO_REGEXTSEL field value from a register. */ +#define ALT_CLKMGR_MAINPLL_VCO_REGEXTSEL_GET(value) (((value) & 0x80000000) >> 31) +/* Produces a ALT_CLKMGR_MAINPLL_VCO_REGEXTSEL register field value suitable for setting the register. */ +#define ALT_CLKMGR_MAINPLL_VCO_REGEXTSEL_SET(value) (((value) << 31) & 0x80000000) + +#ifndef __ASSEMBLY__ +/* + * WARNING: The C register and register group struct declarations are provided for + * convenience and illustrative purposes. They should, however, be used with + * caution as the C language standard provides no guarantees about the alignment or + * atomicity of device memory accesses. The recommended practice for writing + * hardware drivers is to use the SoCAL access macros and alt_read_word() and + * alt_write_word() functions. + * + * The struct declaration for register ALT_CLKMGR_MAINPLL_VCO. + */ +struct ALT_CLKMGR_MAINPLL_VCO_s +{ + uint32_t bgpwrdn : 1; /* BG PWRDN */ + uint32_t en : 1; /* Enable */ + uint32_t pwrdn : 1; /* Power down */ + uint32_t numer : 13; /* Numerator (M) */ + uint32_t denom : 6; /* Denominator (N) */ + uint32_t : 2; /* *UNDEFINED* */ + uint32_t outresetall : 1; /* All Output Counter Reset */ + uint32_t outreset : 6; /* Output Counter Reset */ + uint32_t regextsel : 1; /* External Regulator Input Select */ +}; + +/* The typedef declaration for register ALT_CLKMGR_MAINPLL_VCO. */ +typedef volatile struct ALT_CLKMGR_MAINPLL_VCO_s ALT_CLKMGR_MAINPLL_VCO_t; +#endif /* __ASSEMBLY__ */ + +/* The byte offset of the ALT_CLKMGR_MAINPLL_VCO register from the beginning of the component. */ +#define ALT_CLKMGR_MAINPLL_VCO_OFST 0x0 + +/* + * Register : Main PLL VCO Advanced Control Register - misc + * + * Contains VCO control signals and other PLL control signals need to be + * controllable through register. + * + * Fields are only reset by a cold reset. + * + * Register Layout + * + * Bits | Access | Reset | Description + * :--------|:-------|:------|:------------------------------ + * [0] | RW | 0x0 | Loop Bandwidth Adjust Enabled + * [12:1] | RW | 0x1 | Loop Bandwidth Adjust + * [13] | RW | 0x0 | Fast Locking Enable + * [14] | RW | 0x1 | Saturation Enable + * [31:15] | ??? | 0x0 | *UNDEFINED* + * + */ +/* + * Field : Loop Bandwidth Adjust Enabled - bwadjen + * + * If set to 1, the Loop Bandwidth Adjust value comes from the Loop Bandwidth + * Adjust field. + * + * If set to 0, the Loop Bandwidth Adjust value equals the M field divided by 2 + * value of the VCO Control Register. The M divided by 2 is the upper 12 bits + * (12:1) of the M field in the VCO register. + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_MAINPLL_MISC_BWADJEN register field. */ +#define ALT_CLKMGR_MAINPLL_MISC_BWADJEN_LSB 0 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_MAINPLL_MISC_BWADJEN register field. */ +#define ALT_CLKMGR_MAINPLL_MISC_BWADJEN_MSB 0 +/* The width in bits of the ALT_CLKMGR_MAINPLL_MISC_BWADJEN register field. */ +#define ALT_CLKMGR_MAINPLL_MISC_BWADJEN_WIDTH 1 +/* The mask used to set the ALT_CLKMGR_MAINPLL_MISC_BWADJEN register field value. */ +#define ALT_CLKMGR_MAINPLL_MISC_BWADJEN_SET_MSK 0x00000001 +/* The mask used to clear the ALT_CLKMGR_MAINPLL_MISC_BWADJEN register field value. */ +#define ALT_CLKMGR_MAINPLL_MISC_BWADJEN_CLR_MSK 0xfffffffe +/* The reset value of the ALT_CLKMGR_MAINPLL_MISC_BWADJEN register field. */ +#define ALT_CLKMGR_MAINPLL_MISC_BWADJEN_RESET 0x0 +/* Extracts the ALT_CLKMGR_MAINPLL_MISC_BWADJEN field value from a register. */ +#define ALT_CLKMGR_MAINPLL_MISC_BWADJEN_GET(value) (((value) & 0x00000001) >> 0) +/* Produces a ALT_CLKMGR_MAINPLL_MISC_BWADJEN register field value suitable for setting the register. */ +#define ALT_CLKMGR_MAINPLL_MISC_BWADJEN_SET(value) (((value) << 0) & 0x00000001) + +/* + * Field : Loop Bandwidth Adjust - bwadj + * + * Provides Loop Bandwidth Adjust value. + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_MAINPLL_MISC_BWADJ register field. */ +#define ALT_CLKMGR_MAINPLL_MISC_BWADJ_LSB 1 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_MAINPLL_MISC_BWADJ register field. */ +#define ALT_CLKMGR_MAINPLL_MISC_BWADJ_MSB 12 +/* The width in bits of the ALT_CLKMGR_MAINPLL_MISC_BWADJ register field. */ +#define ALT_CLKMGR_MAINPLL_MISC_BWADJ_WIDTH 12 +/* The mask used to set the ALT_CLKMGR_MAINPLL_MISC_BWADJ register field value. */ +#define ALT_CLKMGR_MAINPLL_MISC_BWADJ_SET_MSK 0x00001ffe +/* The mask used to clear the ALT_CLKMGR_MAINPLL_MISC_BWADJ register field value. */ +#define ALT_CLKMGR_MAINPLL_MISC_BWADJ_CLR_MSK 0xffffe001 +/* The reset value of the ALT_CLKMGR_MAINPLL_MISC_BWADJ register field. */ +#define ALT_CLKMGR_MAINPLL_MISC_BWADJ_RESET 0x1 +/* Extracts the ALT_CLKMGR_MAINPLL_MISC_BWADJ field value from a register. */ +#define ALT_CLKMGR_MAINPLL_MISC_BWADJ_GET(value) (((value) & 0x00001ffe) >> 1) +/* Produces a ALT_CLKMGR_MAINPLL_MISC_BWADJ register field value suitable for setting the register. */ +#define ALT_CLKMGR_MAINPLL_MISC_BWADJ_SET(value) (((value) << 1) & 0x00001ffe) + +/* + * Field : Fast Locking Enable - fasten + * + * Enables fast locking circuit. + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_MAINPLL_MISC_FASTEN register field. */ +#define ALT_CLKMGR_MAINPLL_MISC_FASTEN_LSB 13 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_MAINPLL_MISC_FASTEN register field. */ +#define ALT_CLKMGR_MAINPLL_MISC_FASTEN_MSB 13 +/* The width in bits of the ALT_CLKMGR_MAINPLL_MISC_FASTEN register field. */ +#define ALT_CLKMGR_MAINPLL_MISC_FASTEN_WIDTH 1 +/* The mask used to set the ALT_CLKMGR_MAINPLL_MISC_FASTEN register field value. */ +#define ALT_CLKMGR_MAINPLL_MISC_FASTEN_SET_MSK 0x00002000 +/* The mask used to clear the ALT_CLKMGR_MAINPLL_MISC_FASTEN register field value. */ +#define ALT_CLKMGR_MAINPLL_MISC_FASTEN_CLR_MSK 0xffffdfff +/* The reset value of the ALT_CLKMGR_MAINPLL_MISC_FASTEN register field. */ +#define ALT_CLKMGR_MAINPLL_MISC_FASTEN_RESET 0x0 +/* Extracts the ALT_CLKMGR_MAINPLL_MISC_FASTEN field value from a register. */ +#define ALT_CLKMGR_MAINPLL_MISC_FASTEN_GET(value) (((value) & 0x00002000) >> 13) +/* Produces a ALT_CLKMGR_MAINPLL_MISC_FASTEN register field value suitable for setting the register. */ +#define ALT_CLKMGR_MAINPLL_MISC_FASTEN_SET(value) (((value) << 13) & 0x00002000) + +/* + * Field : Saturation Enable - saten + * + * Enables saturation behavior. + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_MAINPLL_MISC_SATEN register field. */ +#define ALT_CLKMGR_MAINPLL_MISC_SATEN_LSB 14 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_MAINPLL_MISC_SATEN register field. */ +#define ALT_CLKMGR_MAINPLL_MISC_SATEN_MSB 14 +/* The width in bits of the ALT_CLKMGR_MAINPLL_MISC_SATEN register field. */ +#define ALT_CLKMGR_MAINPLL_MISC_SATEN_WIDTH 1 +/* The mask used to set the ALT_CLKMGR_MAINPLL_MISC_SATEN register field value. */ +#define ALT_CLKMGR_MAINPLL_MISC_SATEN_SET_MSK 0x00004000 +/* The mask used to clear the ALT_CLKMGR_MAINPLL_MISC_SATEN register field value. */ +#define ALT_CLKMGR_MAINPLL_MISC_SATEN_CLR_MSK 0xffffbfff +/* The reset value of the ALT_CLKMGR_MAINPLL_MISC_SATEN register field. */ +#define ALT_CLKMGR_MAINPLL_MISC_SATEN_RESET 0x1 +/* Extracts the ALT_CLKMGR_MAINPLL_MISC_SATEN field value from a register. */ +#define ALT_CLKMGR_MAINPLL_MISC_SATEN_GET(value) (((value) & 0x00004000) >> 14) +/* Produces a ALT_CLKMGR_MAINPLL_MISC_SATEN register field value suitable for setting the register. */ +#define ALT_CLKMGR_MAINPLL_MISC_SATEN_SET(value) (((value) << 14) & 0x00004000) + +#ifndef __ASSEMBLY__ +/* + * WARNING: The C register and register group struct declarations are provided for + * convenience and illustrative purposes. They should, however, be used with + * caution as the C language standard provides no guarantees about the alignment or + * atomicity of device memory accesses. The recommended practice for writing + * hardware drivers is to use the SoCAL access macros and alt_read_word() and + * alt_write_word() functions. + * + * The struct declaration for register ALT_CLKMGR_MAINPLL_MISC. + */ +struct ALT_CLKMGR_MAINPLL_MISC_s +{ + uint32_t bwadjen : 1; /* Loop Bandwidth Adjust Enabled */ + uint32_t bwadj : 12; /* Loop Bandwidth Adjust */ + uint32_t fasten : 1; /* Fast Locking Enable */ + uint32_t saten : 1; /* Saturation Enable */ + uint32_t : 17; /* *UNDEFINED* */ +}; + +/* The typedef declaration for register ALT_CLKMGR_MAINPLL_MISC. */ +typedef volatile struct ALT_CLKMGR_MAINPLL_MISC_s ALT_CLKMGR_MAINPLL_MISC_t; +#endif /* __ASSEMBLY__ */ + +/* The byte offset of the ALT_CLKMGR_MAINPLL_MISC register from the beginning of the component. */ +#define ALT_CLKMGR_MAINPLL_MISC_OFST 0x4 + +/* + * Register : Main PLL C0 Control Register for Clock mpu_clk - mpuclk + * + * Contains settings that control clock mpu_clk generated from the C0 output of the + * Main PLL. + * + * Only reset by a cold reset. + * + * Register Layout + * + * Bits | Access | Reset | Description + * :-------|:-------|:------|:------------ + * [8:0] | RW | 0x0 | Counter + * [31:9] | ??? | 0x0 | *UNDEFINED* + * + */ +/* + * Field : Counter - cnt + * + * Divides the VCO/2 frequency by the value+1 in this field. + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_MAINPLL_MPUCLK_CNT register field. */ +#define ALT_CLKMGR_MAINPLL_MPUCLK_CNT_LSB 0 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_MAINPLL_MPUCLK_CNT register field. */ +#define ALT_CLKMGR_MAINPLL_MPUCLK_CNT_MSB 8 +/* The width in bits of the ALT_CLKMGR_MAINPLL_MPUCLK_CNT register field. */ +#define ALT_CLKMGR_MAINPLL_MPUCLK_CNT_WIDTH 9 +/* The mask used to set the ALT_CLKMGR_MAINPLL_MPUCLK_CNT register field value. */ +#define ALT_CLKMGR_MAINPLL_MPUCLK_CNT_SET_MSK 0x000001ff +/* The mask used to clear the ALT_CLKMGR_MAINPLL_MPUCLK_CNT register field value. */ +#define ALT_CLKMGR_MAINPLL_MPUCLK_CNT_CLR_MSK 0xfffffe00 +/* The reset value of the ALT_CLKMGR_MAINPLL_MPUCLK_CNT register field. */ +#define ALT_CLKMGR_MAINPLL_MPUCLK_CNT_RESET 0x0 +/* Extracts the ALT_CLKMGR_MAINPLL_MPUCLK_CNT field value from a register. */ +#define ALT_CLKMGR_MAINPLL_MPUCLK_CNT_GET(value) (((value) & 0x000001ff) >> 0) +/* Produces a ALT_CLKMGR_MAINPLL_MPUCLK_CNT register field value suitable for setting the register. */ +#define ALT_CLKMGR_MAINPLL_MPUCLK_CNT_SET(value) (((value) << 0) & 0x000001ff) + +#ifndef __ASSEMBLY__ +/* + * WARNING: The C register and register group struct declarations are provided for + * convenience and illustrative purposes. They should, however, be used with + * caution as the C language standard provides no guarantees about the alignment or + * atomicity of device memory accesses. The recommended practice for writing + * hardware drivers is to use the SoCAL access macros and alt_read_word() and + * alt_write_word() functions. + * + * The struct declaration for register ALT_CLKMGR_MAINPLL_MPUCLK. + */ +struct ALT_CLKMGR_MAINPLL_MPUCLK_s +{ + uint32_t cnt : 9; /* Counter */ + uint32_t : 23; /* *UNDEFINED* */ +}; + +/* The typedef declaration for register ALT_CLKMGR_MAINPLL_MPUCLK. */ +typedef volatile struct ALT_CLKMGR_MAINPLL_MPUCLK_s ALT_CLKMGR_MAINPLL_MPUCLK_t; +#endif /* __ASSEMBLY__ */ + +/* The byte offset of the ALT_CLKMGR_MAINPLL_MPUCLK register from the beginning of the component. */ +#define ALT_CLKMGR_MAINPLL_MPUCLK_OFST 0x8 + +/* + * Register : Main PLL C1 Control Register for Clock main_clk - mainclk + * + * Contains settings that control clock main_clk generated from the C1 output of + * the Main PLL. + * + * Only reset by a cold reset. + * + * Register Layout + * + * Bits | Access | Reset | Description + * :-------|:-------|:------|:------------ + * [8:0] | RW | 0x0 | Counter + * [31:9] | ??? | 0x0 | *UNDEFINED* + * + */ +/* + * Field : Counter - cnt + * + * Divides the VCO/4 frequency by the value+1 in this field. + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_MAINPLL_MAINCLK_CNT register field. */ +#define ALT_CLKMGR_MAINPLL_MAINCLK_CNT_LSB 0 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_MAINPLL_MAINCLK_CNT register field. */ +#define ALT_CLKMGR_MAINPLL_MAINCLK_CNT_MSB 8 +/* The width in bits of the ALT_CLKMGR_MAINPLL_MAINCLK_CNT register field. */ +#define ALT_CLKMGR_MAINPLL_MAINCLK_CNT_WIDTH 9 +/* The mask used to set the ALT_CLKMGR_MAINPLL_MAINCLK_CNT register field value. */ +#define ALT_CLKMGR_MAINPLL_MAINCLK_CNT_SET_MSK 0x000001ff +/* The mask used to clear the ALT_CLKMGR_MAINPLL_MAINCLK_CNT register field value. */ +#define ALT_CLKMGR_MAINPLL_MAINCLK_CNT_CLR_MSK 0xfffffe00 +/* The reset value of the ALT_CLKMGR_MAINPLL_MAINCLK_CNT register field. */ +#define ALT_CLKMGR_MAINPLL_MAINCLK_CNT_RESET 0x0 +/* Extracts the ALT_CLKMGR_MAINPLL_MAINCLK_CNT field value from a register. */ +#define ALT_CLKMGR_MAINPLL_MAINCLK_CNT_GET(value) (((value) & 0x000001ff) >> 0) +/* Produces a ALT_CLKMGR_MAINPLL_MAINCLK_CNT register field value suitable for setting the register. */ +#define ALT_CLKMGR_MAINPLL_MAINCLK_CNT_SET(value) (((value) << 0) & 0x000001ff) + +#ifndef __ASSEMBLY__ +/* + * WARNING: The C register and register group struct declarations are provided for + * convenience and illustrative purposes. They should, however, be used with + * caution as the C language standard provides no guarantees about the alignment or + * atomicity of device memory accesses. The recommended practice for writing + * hardware drivers is to use the SoCAL access macros and alt_read_word() and + * alt_write_word() functions. + * + * The struct declaration for register ALT_CLKMGR_MAINPLL_MAINCLK. + */ +struct ALT_CLKMGR_MAINPLL_MAINCLK_s +{ + uint32_t cnt : 9; /* Counter */ + uint32_t : 23; /* *UNDEFINED* */ +}; + +/* The typedef declaration for register ALT_CLKMGR_MAINPLL_MAINCLK. */ +typedef volatile struct ALT_CLKMGR_MAINPLL_MAINCLK_s ALT_CLKMGR_MAINPLL_MAINCLK_t; +#endif /* __ASSEMBLY__ */ + +/* The byte offset of the ALT_CLKMGR_MAINPLL_MAINCLK register from the beginning of the component. */ +#define ALT_CLKMGR_MAINPLL_MAINCLK_OFST 0xc + +/* + * Register : Main PLL C2 Control Register for Clock dbg_base_clk - dbgatclk + * + * Contains settings that control clock dbg_base_clk generated from the C2 output + * of the Main PLL. + * + * Only reset by a cold reset. + * + * Register Layout + * + * Bits | Access | Reset | Description + * :-------|:-------|:------|:------------ + * [8:0] | RW | 0x0 | Counter + * [31:9] | ??? | 0x0 | *UNDEFINED* + * + */ +/* + * Field : Counter - cnt + * + * Divides the VCO/4 frequency by the value+1 in this field. + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_MAINPLL_DBGATCLK_CNT register field. */ +#define ALT_CLKMGR_MAINPLL_DBGATCLK_CNT_LSB 0 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_MAINPLL_DBGATCLK_CNT register field. */ +#define ALT_CLKMGR_MAINPLL_DBGATCLK_CNT_MSB 8 +/* The width in bits of the ALT_CLKMGR_MAINPLL_DBGATCLK_CNT register field. */ +#define ALT_CLKMGR_MAINPLL_DBGATCLK_CNT_WIDTH 9 +/* The mask used to set the ALT_CLKMGR_MAINPLL_DBGATCLK_CNT register field value. */ +#define ALT_CLKMGR_MAINPLL_DBGATCLK_CNT_SET_MSK 0x000001ff +/* The mask used to clear the ALT_CLKMGR_MAINPLL_DBGATCLK_CNT register field value. */ +#define ALT_CLKMGR_MAINPLL_DBGATCLK_CNT_CLR_MSK 0xfffffe00 +/* The reset value of the ALT_CLKMGR_MAINPLL_DBGATCLK_CNT register field. */ +#define ALT_CLKMGR_MAINPLL_DBGATCLK_CNT_RESET 0x0 +/* Extracts the ALT_CLKMGR_MAINPLL_DBGATCLK_CNT field value from a register. */ +#define ALT_CLKMGR_MAINPLL_DBGATCLK_CNT_GET(value) (((value) & 0x000001ff) >> 0) +/* Produces a ALT_CLKMGR_MAINPLL_DBGATCLK_CNT register field value suitable for setting the register. */ +#define ALT_CLKMGR_MAINPLL_DBGATCLK_CNT_SET(value) (((value) << 0) & 0x000001ff) + +#ifndef __ASSEMBLY__ +/* + * WARNING: The C register and register group struct declarations are provided for + * convenience and illustrative purposes. They should, however, be used with + * caution as the C language standard provides no guarantees about the alignment or + * atomicity of device memory accesses. The recommended practice for writing + * hardware drivers is to use the SoCAL access macros and alt_read_word() and + * alt_write_word() functions. + * + * The struct declaration for register ALT_CLKMGR_MAINPLL_DBGATCLK. + */ +struct ALT_CLKMGR_MAINPLL_DBGATCLK_s +{ + uint32_t cnt : 9; /* Counter */ + uint32_t : 23; /* *UNDEFINED* */ +}; + +/* The typedef declaration for register ALT_CLKMGR_MAINPLL_DBGATCLK. */ +typedef volatile struct ALT_CLKMGR_MAINPLL_DBGATCLK_s ALT_CLKMGR_MAINPLL_DBGATCLK_t; +#endif /* __ASSEMBLY__ */ + +/* The byte offset of the ALT_CLKMGR_MAINPLL_DBGATCLK register from the beginning of the component. */ +#define ALT_CLKMGR_MAINPLL_DBGATCLK_OFST 0x10 + +/* + * Register : Main PLL C3 Control Register for Clock main_qspi_clk - mainqspiclk + * + * Contains settings that control clock main_qspi_clk generated from the C3 output + * of the Main PLL. + * + * Only reset by a cold reset. + * + * Register Layout + * + * Bits | Access | Reset | Description + * :-------|:-------|:------|:------------ + * [8:0] | RW | 0x3 | Counter + * [31:9] | ??? | 0x0 | *UNDEFINED* + * + */ +/* + * Field : Counter - cnt + * + * Divides the VCO frequency by the value+1 in this field. + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_MAINPLL_MAINQSPICLK_CNT register field. */ +#define ALT_CLKMGR_MAINPLL_MAINQSPICLK_CNT_LSB 0 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_MAINPLL_MAINQSPICLK_CNT register field. */ +#define ALT_CLKMGR_MAINPLL_MAINQSPICLK_CNT_MSB 8 +/* The width in bits of the ALT_CLKMGR_MAINPLL_MAINQSPICLK_CNT register field. */ +#define ALT_CLKMGR_MAINPLL_MAINQSPICLK_CNT_WIDTH 9 +/* The mask used to set the ALT_CLKMGR_MAINPLL_MAINQSPICLK_CNT register field value. */ +#define ALT_CLKMGR_MAINPLL_MAINQSPICLK_CNT_SET_MSK 0x000001ff +/* The mask used to clear the ALT_CLKMGR_MAINPLL_MAINQSPICLK_CNT register field value. */ +#define ALT_CLKMGR_MAINPLL_MAINQSPICLK_CNT_CLR_MSK 0xfffffe00 +/* The reset value of the ALT_CLKMGR_MAINPLL_MAINQSPICLK_CNT register field. */ +#define ALT_CLKMGR_MAINPLL_MAINQSPICLK_CNT_RESET 0x3 +/* Extracts the ALT_CLKMGR_MAINPLL_MAINQSPICLK_CNT field value from a register. */ +#define ALT_CLKMGR_MAINPLL_MAINQSPICLK_CNT_GET(value) (((value) & 0x000001ff) >> 0) +/* Produces a ALT_CLKMGR_MAINPLL_MAINQSPICLK_CNT register field value suitable for setting the register. */ +#define ALT_CLKMGR_MAINPLL_MAINQSPICLK_CNT_SET(value) (((value) << 0) & 0x000001ff) + +#ifndef __ASSEMBLY__ +/* + * WARNING: The C register and register group struct declarations are provided for + * convenience and illustrative purposes. They should, however, be used with + * caution as the C language standard provides no guarantees about the alignment or + * atomicity of device memory accesses. The recommended practice for writing + * hardware drivers is to use the SoCAL access macros and alt_read_word() and + * alt_write_word() functions. + * + * The struct declaration for register ALT_CLKMGR_MAINPLL_MAINQSPICLK. + */ +struct ALT_CLKMGR_MAINPLL_MAINQSPICLK_s +{ + uint32_t cnt : 9; /* Counter */ + uint32_t : 23; /* *UNDEFINED* */ +}; + +/* The typedef declaration for register ALT_CLKMGR_MAINPLL_MAINQSPICLK. */ +typedef volatile struct ALT_CLKMGR_MAINPLL_MAINQSPICLK_s ALT_CLKMGR_MAINPLL_MAINQSPICLK_t; +#endif /* __ASSEMBLY__ */ + +/* The byte offset of the ALT_CLKMGR_MAINPLL_MAINQSPICLK register from the beginning of the component. */ +#define ALT_CLKMGR_MAINPLL_MAINQSPICLK_OFST 0x14 + +/* + * Register : Main PLL C4 Control Register for Clock main_nand_sdmmc_clk - mainnandsdmmcclk + * + * Contains settings that control clock main_nand_sdmmc_clk generated from the C4 + * output of the Main PLL. + * + * Only reset by a cold reset. + * + * Register Layout + * + * Bits | Access | Reset | Description + * :-------|:-------|:------|:------------ + * [8:0] | RW | 0x3 | Counter + * [31:9] | ??? | 0x0 | *UNDEFINED* + * + */ +/* + * Field : Counter - cnt + * + * Divides the VCO frequency by the value+1 in this field. + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_MAINPLL_MAINNANDSDMMCCLK_CNT register field. */ +#define ALT_CLKMGR_MAINPLL_MAINNANDSDMMCCLK_CNT_LSB 0 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_MAINPLL_MAINNANDSDMMCCLK_CNT register field. */ +#define ALT_CLKMGR_MAINPLL_MAINNANDSDMMCCLK_CNT_MSB 8 +/* The width in bits of the ALT_CLKMGR_MAINPLL_MAINNANDSDMMCCLK_CNT register field. */ +#define ALT_CLKMGR_MAINPLL_MAINNANDSDMMCCLK_CNT_WIDTH 9 +/* The mask used to set the ALT_CLKMGR_MAINPLL_MAINNANDSDMMCCLK_CNT register field value. */ +#define ALT_CLKMGR_MAINPLL_MAINNANDSDMMCCLK_CNT_SET_MSK 0x000001ff +/* The mask used to clear the ALT_CLKMGR_MAINPLL_MAINNANDSDMMCCLK_CNT register field value. */ +#define ALT_CLKMGR_MAINPLL_MAINNANDSDMMCCLK_CNT_CLR_MSK 0xfffffe00 +/* The reset value of the ALT_CLKMGR_MAINPLL_MAINNANDSDMMCCLK_CNT register field. */ +#define ALT_CLKMGR_MAINPLL_MAINNANDSDMMCCLK_CNT_RESET 0x3 +/* Extracts the ALT_CLKMGR_MAINPLL_MAINNANDSDMMCCLK_CNT field value from a register. */ +#define ALT_CLKMGR_MAINPLL_MAINNANDSDMMCCLK_CNT_GET(value) (((value) & 0x000001ff) >> 0) +/* Produces a ALT_CLKMGR_MAINPLL_MAINNANDSDMMCCLK_CNT register field value suitable for setting the register. */ +#define ALT_CLKMGR_MAINPLL_MAINNANDSDMMCCLK_CNT_SET(value) (((value) << 0) & 0x000001ff) + +#ifndef __ASSEMBLY__ +/* + * WARNING: The C register and register group struct declarations are provided for + * convenience and illustrative purposes. They should, however, be used with + * caution as the C language standard provides no guarantees about the alignment or + * atomicity of device memory accesses. The recommended practice for writing + * hardware drivers is to use the SoCAL access macros and alt_read_word() and + * alt_write_word() functions. + * + * The struct declaration for register ALT_CLKMGR_MAINPLL_MAINNANDSDMMCCLK. + */ +struct ALT_CLKMGR_MAINPLL_MAINNANDSDMMCCLK_s +{ + uint32_t cnt : 9; /* Counter */ + uint32_t : 23; /* *UNDEFINED* */ +}; + +/* The typedef declaration for register ALT_CLKMGR_MAINPLL_MAINNANDSDMMCCLK. */ +typedef volatile struct ALT_CLKMGR_MAINPLL_MAINNANDSDMMCCLK_s ALT_CLKMGR_MAINPLL_MAINNANDSDMMCCLK_t; +#endif /* __ASSEMBLY__ */ + +/* The byte offset of the ALT_CLKMGR_MAINPLL_MAINNANDSDMMCCLK register from the beginning of the component. */ +#define ALT_CLKMGR_MAINPLL_MAINNANDSDMMCCLK_OFST 0x18 + +/* + * Register : Main PLL C5 Control Register for Clock cfg_s2f_user0_clk - cfgs2fuser0clk + * + * Contains settings that control clock cfg_s2f_user0_clk generated from the C5 + * output of the Main PLL. + * + * Qsys and user documenation refer to cfg_s2f_user0_clk as cfg_h2f_user0_clk. + * + * Only reset by a cold reset. + * + * Register Layout + * + * Bits | Access | Reset | Description + * :-------|:-------|:------|:------------ + * [8:0] | RW | 0xf | Counter + * [31:9] | ??? | 0x0 | *UNDEFINED* + * + */ +/* + * Field : Counter - cnt + * + * Divides the VCO frequency by the value+1 in this field. + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_MAINPLL_CFGS2FUSER0CLK_CNT register field. */ +#define ALT_CLKMGR_MAINPLL_CFGS2FUSER0CLK_CNT_LSB 0 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_MAINPLL_CFGS2FUSER0CLK_CNT register field. */ +#define ALT_CLKMGR_MAINPLL_CFGS2FUSER0CLK_CNT_MSB 8 +/* The width in bits of the ALT_CLKMGR_MAINPLL_CFGS2FUSER0CLK_CNT register field. */ +#define ALT_CLKMGR_MAINPLL_CFGS2FUSER0CLK_CNT_WIDTH 9 +/* The mask used to set the ALT_CLKMGR_MAINPLL_CFGS2FUSER0CLK_CNT register field value. */ +#define ALT_CLKMGR_MAINPLL_CFGS2FUSER0CLK_CNT_SET_MSK 0x000001ff +/* The mask used to clear the ALT_CLKMGR_MAINPLL_CFGS2FUSER0CLK_CNT register field value. */ +#define ALT_CLKMGR_MAINPLL_CFGS2FUSER0CLK_CNT_CLR_MSK 0xfffffe00 +/* The reset value of the ALT_CLKMGR_MAINPLL_CFGS2FUSER0CLK_CNT register field. */ +#define ALT_CLKMGR_MAINPLL_CFGS2FUSER0CLK_CNT_RESET 0xf +/* Extracts the ALT_CLKMGR_MAINPLL_CFGS2FUSER0CLK_CNT field value from a register. */ +#define ALT_CLKMGR_MAINPLL_CFGS2FUSER0CLK_CNT_GET(value) (((value) & 0x000001ff) >> 0) +/* Produces a ALT_CLKMGR_MAINPLL_CFGS2FUSER0CLK_CNT register field value suitable for setting the register. */ +#define ALT_CLKMGR_MAINPLL_CFGS2FUSER0CLK_CNT_SET(value) (((value) << 0) & 0x000001ff) + +#ifndef __ASSEMBLY__ +/* + * WARNING: The C register and register group struct declarations are provided for + * convenience and illustrative purposes. They should, however, be used with + * caution as the C language standard provides no guarantees about the alignment or + * atomicity of device memory accesses. The recommended practice for writing + * hardware drivers is to use the SoCAL access macros and alt_read_word() and + * alt_write_word() functions. + * + * The struct declaration for register ALT_CLKMGR_MAINPLL_CFGS2FUSER0CLK. + */ +struct ALT_CLKMGR_MAINPLL_CFGS2FUSER0CLK_s +{ + uint32_t cnt : 9; /* Counter */ + uint32_t : 23; /* *UNDEFINED* */ +}; + +/* The typedef declaration for register ALT_CLKMGR_MAINPLL_CFGS2FUSER0CLK. */ +typedef volatile struct ALT_CLKMGR_MAINPLL_CFGS2FUSER0CLK_s ALT_CLKMGR_MAINPLL_CFGS2FUSER0CLK_t; +#endif /* __ASSEMBLY__ */ + +/* The byte offset of the ALT_CLKMGR_MAINPLL_CFGS2FUSER0CLK register from the beginning of the component. */ +#define ALT_CLKMGR_MAINPLL_CFGS2FUSER0CLK_OFST 0x1c + +/* + * Register : Enable Register - en + * + * Contains fields that control clock enables for clocks derived from the Main PLL. + * + * 1: The clock is enabled. + * + * 0: The clock is disabled. + * + * Fields are only reset by a cold reset. + * + * Register Layout + * + * Bits | Access | Reset | Description + * :--------|:-------|:------|:--------------------- + * [0] | RW | 0x1 | l4_main_clk Enable + * [1] | RW | 0x1 | l3_mp_clk Enable + * [2] | RW | 0x1 | l4_mp_clk Enable + * [3] | RW | 0x1 | l4_sp_clk Enable + * [4] | RW | 0x1 | dbg_at_clk Enable + * [5] | RW | 0x1 | dbg_clk Enable + * [6] | RW | 0x1 | dbg_trace_clk Enable + * [7] | RW | 0x1 | dbg_timer_clk Enable + * [8] | RW | 0x1 | cfg_clk Enable + * [9] | RW | 0x1 | s2f_user0_clk Enable + * [31:10] | ??? | 0x0 | *UNDEFINED* + * + */ +/* + * Field : l4_main_clk Enable - l4mainclk + * + * Enables clock l4_main_clk output + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_MAINPLL_EN_L4MAINCLK register field. */ +#define ALT_CLKMGR_MAINPLL_EN_L4MAINCLK_LSB 0 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_MAINPLL_EN_L4MAINCLK register field. */ +#define ALT_CLKMGR_MAINPLL_EN_L4MAINCLK_MSB 0 +/* The width in bits of the ALT_CLKMGR_MAINPLL_EN_L4MAINCLK register field. */ +#define ALT_CLKMGR_MAINPLL_EN_L4MAINCLK_WIDTH 1 +/* The mask used to set the ALT_CLKMGR_MAINPLL_EN_L4MAINCLK register field value. */ +#define ALT_CLKMGR_MAINPLL_EN_L4MAINCLK_SET_MSK 0x00000001 +/* The mask used to clear the ALT_CLKMGR_MAINPLL_EN_L4MAINCLK register field value. */ +#define ALT_CLKMGR_MAINPLL_EN_L4MAINCLK_CLR_MSK 0xfffffffe +/* The reset value of the ALT_CLKMGR_MAINPLL_EN_L4MAINCLK register field. */ +#define ALT_CLKMGR_MAINPLL_EN_L4MAINCLK_RESET 0x1 +/* Extracts the ALT_CLKMGR_MAINPLL_EN_L4MAINCLK field value from a register. */ +#define ALT_CLKMGR_MAINPLL_EN_L4MAINCLK_GET(value) (((value) & 0x00000001) >> 0) +/* Produces a ALT_CLKMGR_MAINPLL_EN_L4MAINCLK register field value suitable for setting the register. */ +#define ALT_CLKMGR_MAINPLL_EN_L4MAINCLK_SET(value) (((value) << 0) & 0x00000001) + +/* + * Field : l3_mp_clk Enable - l3mpclk + * + * Enables clock l3_mp_clk output + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_MAINPLL_EN_L3MPCLK register field. */ +#define ALT_CLKMGR_MAINPLL_EN_L3MPCLK_LSB 1 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_MAINPLL_EN_L3MPCLK register field. */ +#define ALT_CLKMGR_MAINPLL_EN_L3MPCLK_MSB 1 +/* The width in bits of the ALT_CLKMGR_MAINPLL_EN_L3MPCLK register field. */ +#define ALT_CLKMGR_MAINPLL_EN_L3MPCLK_WIDTH 1 +/* The mask used to set the ALT_CLKMGR_MAINPLL_EN_L3MPCLK register field value. */ +#define ALT_CLKMGR_MAINPLL_EN_L3MPCLK_SET_MSK 0x00000002 +/* The mask used to clear the ALT_CLKMGR_MAINPLL_EN_L3MPCLK register field value. */ +#define ALT_CLKMGR_MAINPLL_EN_L3MPCLK_CLR_MSK 0xfffffffd +/* The reset value of the ALT_CLKMGR_MAINPLL_EN_L3MPCLK register field. */ +#define ALT_CLKMGR_MAINPLL_EN_L3MPCLK_RESET 0x1 +/* Extracts the ALT_CLKMGR_MAINPLL_EN_L3MPCLK field value from a register. */ +#define ALT_CLKMGR_MAINPLL_EN_L3MPCLK_GET(value) (((value) & 0x00000002) >> 1) +/* Produces a ALT_CLKMGR_MAINPLL_EN_L3MPCLK register field value suitable for setting the register. */ +#define ALT_CLKMGR_MAINPLL_EN_L3MPCLK_SET(value) (((value) << 1) & 0x00000002) + +/* + * Field : l4_mp_clk Enable - l4mpclk + * + * Enables clock l4_mp_clk output + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_MAINPLL_EN_L4MPCLK register field. */ +#define ALT_CLKMGR_MAINPLL_EN_L4MPCLK_LSB 2 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_MAINPLL_EN_L4MPCLK register field. */ +#define ALT_CLKMGR_MAINPLL_EN_L4MPCLK_MSB 2 +/* The width in bits of the ALT_CLKMGR_MAINPLL_EN_L4MPCLK register field. */ +#define ALT_CLKMGR_MAINPLL_EN_L4MPCLK_WIDTH 1 +/* The mask used to set the ALT_CLKMGR_MAINPLL_EN_L4MPCLK register field value. */ +#define ALT_CLKMGR_MAINPLL_EN_L4MPCLK_SET_MSK 0x00000004 +/* The mask used to clear the ALT_CLKMGR_MAINPLL_EN_L4MPCLK register field value. */ +#define ALT_CLKMGR_MAINPLL_EN_L4MPCLK_CLR_MSK 0xfffffffb +/* The reset value of the ALT_CLKMGR_MAINPLL_EN_L4MPCLK register field. */ +#define ALT_CLKMGR_MAINPLL_EN_L4MPCLK_RESET 0x1 +/* Extracts the ALT_CLKMGR_MAINPLL_EN_L4MPCLK field value from a register. */ +#define ALT_CLKMGR_MAINPLL_EN_L4MPCLK_GET(value) (((value) & 0x00000004) >> 2) +/* Produces a ALT_CLKMGR_MAINPLL_EN_L4MPCLK register field value suitable for setting the register. */ +#define ALT_CLKMGR_MAINPLL_EN_L4MPCLK_SET(value) (((value) << 2) & 0x00000004) + +/* + * Field : l4_sp_clk Enable - l4spclk + * + * Enables clock l4_sp_clk output + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_MAINPLL_EN_L4SPCLK register field. */ +#define ALT_CLKMGR_MAINPLL_EN_L4SPCLK_LSB 3 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_MAINPLL_EN_L4SPCLK register field. */ +#define ALT_CLKMGR_MAINPLL_EN_L4SPCLK_MSB 3 +/* The width in bits of the ALT_CLKMGR_MAINPLL_EN_L4SPCLK register field. */ +#define ALT_CLKMGR_MAINPLL_EN_L4SPCLK_WIDTH 1 +/* The mask used to set the ALT_CLKMGR_MAINPLL_EN_L4SPCLK register field value. */ +#define ALT_CLKMGR_MAINPLL_EN_L4SPCLK_SET_MSK 0x00000008 +/* The mask used to clear the ALT_CLKMGR_MAINPLL_EN_L4SPCLK register field value. */ +#define ALT_CLKMGR_MAINPLL_EN_L4SPCLK_CLR_MSK 0xfffffff7 +/* The reset value of the ALT_CLKMGR_MAINPLL_EN_L4SPCLK register field. */ +#define ALT_CLKMGR_MAINPLL_EN_L4SPCLK_RESET 0x1 +/* Extracts the ALT_CLKMGR_MAINPLL_EN_L4SPCLK field value from a register. */ +#define ALT_CLKMGR_MAINPLL_EN_L4SPCLK_GET(value) (((value) & 0x00000008) >> 3) +/* Produces a ALT_CLKMGR_MAINPLL_EN_L4SPCLK register field value suitable for setting the register. */ +#define ALT_CLKMGR_MAINPLL_EN_L4SPCLK_SET(value) (((value) << 3) & 0x00000008) + +/* + * Field : dbg_at_clk Enable - dbgatclk + * + * Enables clock dbg_at_clk output + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_MAINPLL_EN_DBGATCLK register field. */ +#define ALT_CLKMGR_MAINPLL_EN_DBGATCLK_LSB 4 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_MAINPLL_EN_DBGATCLK register field. */ +#define ALT_CLKMGR_MAINPLL_EN_DBGATCLK_MSB 4 +/* The width in bits of the ALT_CLKMGR_MAINPLL_EN_DBGATCLK register field. */ +#define ALT_CLKMGR_MAINPLL_EN_DBGATCLK_WIDTH 1 +/* The mask used to set the ALT_CLKMGR_MAINPLL_EN_DBGATCLK register field value. */ +#define ALT_CLKMGR_MAINPLL_EN_DBGATCLK_SET_MSK 0x00000010 +/* The mask used to clear the ALT_CLKMGR_MAINPLL_EN_DBGATCLK register field value. */ +#define ALT_CLKMGR_MAINPLL_EN_DBGATCLK_CLR_MSK 0xffffffef +/* The reset value of the ALT_CLKMGR_MAINPLL_EN_DBGATCLK register field. */ +#define ALT_CLKMGR_MAINPLL_EN_DBGATCLK_RESET 0x1 +/* Extracts the ALT_CLKMGR_MAINPLL_EN_DBGATCLK field value from a register. */ +#define ALT_CLKMGR_MAINPLL_EN_DBGATCLK_GET(value) (((value) & 0x00000010) >> 4) +/* Produces a ALT_CLKMGR_MAINPLL_EN_DBGATCLK register field value suitable for setting the register. */ +#define ALT_CLKMGR_MAINPLL_EN_DBGATCLK_SET(value) (((value) << 4) & 0x00000010) + +/* + * Field : dbg_clk Enable - dbgclk + * + * Enables clock dbg_clk output + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_MAINPLL_EN_DBGCLK register field. */ +#define ALT_CLKMGR_MAINPLL_EN_DBGCLK_LSB 5 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_MAINPLL_EN_DBGCLK register field. */ +#define ALT_CLKMGR_MAINPLL_EN_DBGCLK_MSB 5 +/* The width in bits of the ALT_CLKMGR_MAINPLL_EN_DBGCLK register field. */ +#define ALT_CLKMGR_MAINPLL_EN_DBGCLK_WIDTH 1 +/* The mask used to set the ALT_CLKMGR_MAINPLL_EN_DBGCLK register field value. */ +#define ALT_CLKMGR_MAINPLL_EN_DBGCLK_SET_MSK 0x00000020 +/* The mask used to clear the ALT_CLKMGR_MAINPLL_EN_DBGCLK register field value. */ +#define ALT_CLKMGR_MAINPLL_EN_DBGCLK_CLR_MSK 0xffffffdf +/* The reset value of the ALT_CLKMGR_MAINPLL_EN_DBGCLK register field. */ +#define ALT_CLKMGR_MAINPLL_EN_DBGCLK_RESET 0x1 +/* Extracts the ALT_CLKMGR_MAINPLL_EN_DBGCLK field value from a register. */ +#define ALT_CLKMGR_MAINPLL_EN_DBGCLK_GET(value) (((value) & 0x00000020) >> 5) +/* Produces a ALT_CLKMGR_MAINPLL_EN_DBGCLK register field value suitable for setting the register. */ +#define ALT_CLKMGR_MAINPLL_EN_DBGCLK_SET(value) (((value) << 5) & 0x00000020) + +/* + * Field : dbg_trace_clk Enable - dbgtraceclk + * + * Enables clock dbg_trace_clk output + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_MAINPLL_EN_DBGTRACECLK register field. */ +#define ALT_CLKMGR_MAINPLL_EN_DBGTRACECLK_LSB 6 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_MAINPLL_EN_DBGTRACECLK register field. */ +#define ALT_CLKMGR_MAINPLL_EN_DBGTRACECLK_MSB 6 +/* The width in bits of the ALT_CLKMGR_MAINPLL_EN_DBGTRACECLK register field. */ +#define ALT_CLKMGR_MAINPLL_EN_DBGTRACECLK_WIDTH 1 +/* The mask used to set the ALT_CLKMGR_MAINPLL_EN_DBGTRACECLK register field value. */ +#define ALT_CLKMGR_MAINPLL_EN_DBGTRACECLK_SET_MSK 0x00000040 +/* The mask used to clear the ALT_CLKMGR_MAINPLL_EN_DBGTRACECLK register field value. */ +#define ALT_CLKMGR_MAINPLL_EN_DBGTRACECLK_CLR_MSK 0xffffffbf +/* The reset value of the ALT_CLKMGR_MAINPLL_EN_DBGTRACECLK register field. */ +#define ALT_CLKMGR_MAINPLL_EN_DBGTRACECLK_RESET 0x1 +/* Extracts the ALT_CLKMGR_MAINPLL_EN_DBGTRACECLK field value from a register. */ +#define ALT_CLKMGR_MAINPLL_EN_DBGTRACECLK_GET(value) (((value) & 0x00000040) >> 6) +/* Produces a ALT_CLKMGR_MAINPLL_EN_DBGTRACECLK register field value suitable for setting the register. */ +#define ALT_CLKMGR_MAINPLL_EN_DBGTRACECLK_SET(value) (((value) << 6) & 0x00000040) + +/* + * Field : dbg_timer_clk Enable - dbgtimerclk + * + * Enables clock dbg_timer_clk output + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_MAINPLL_EN_DBGTMRCLK register field. */ +#define ALT_CLKMGR_MAINPLL_EN_DBGTMRCLK_LSB 7 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_MAINPLL_EN_DBGTMRCLK register field. */ +#define ALT_CLKMGR_MAINPLL_EN_DBGTMRCLK_MSB 7 +/* The width in bits of the ALT_CLKMGR_MAINPLL_EN_DBGTMRCLK register field. */ +#define ALT_CLKMGR_MAINPLL_EN_DBGTMRCLK_WIDTH 1 +/* The mask used to set the ALT_CLKMGR_MAINPLL_EN_DBGTMRCLK register field value. */ +#define ALT_CLKMGR_MAINPLL_EN_DBGTMRCLK_SET_MSK 0x00000080 +/* The mask used to clear the ALT_CLKMGR_MAINPLL_EN_DBGTMRCLK register field value. */ +#define ALT_CLKMGR_MAINPLL_EN_DBGTMRCLK_CLR_MSK 0xffffff7f +/* The reset value of the ALT_CLKMGR_MAINPLL_EN_DBGTMRCLK register field. */ +#define ALT_CLKMGR_MAINPLL_EN_DBGTMRCLK_RESET 0x1 +/* Extracts the ALT_CLKMGR_MAINPLL_EN_DBGTMRCLK field value from a register. */ +#define ALT_CLKMGR_MAINPLL_EN_DBGTMRCLK_GET(value) (((value) & 0x00000080) >> 7) +/* Produces a ALT_CLKMGR_MAINPLL_EN_DBGTMRCLK register field value suitable for setting the register. */ +#define ALT_CLKMGR_MAINPLL_EN_DBGTMRCLK_SET(value) (((value) << 7) & 0x00000080) + +/* + * Field : cfg_clk Enable - cfgclk + * + * Enables clock cfg_clk output + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_MAINPLL_EN_CFGCLK register field. */ +#define ALT_CLKMGR_MAINPLL_EN_CFGCLK_LSB 8 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_MAINPLL_EN_CFGCLK register field. */ +#define ALT_CLKMGR_MAINPLL_EN_CFGCLK_MSB 8 +/* The width in bits of the ALT_CLKMGR_MAINPLL_EN_CFGCLK register field. */ +#define ALT_CLKMGR_MAINPLL_EN_CFGCLK_WIDTH 1 +/* The mask used to set the ALT_CLKMGR_MAINPLL_EN_CFGCLK register field value. */ +#define ALT_CLKMGR_MAINPLL_EN_CFGCLK_SET_MSK 0x00000100 +/* The mask used to clear the ALT_CLKMGR_MAINPLL_EN_CFGCLK register field value. */ +#define ALT_CLKMGR_MAINPLL_EN_CFGCLK_CLR_MSK 0xfffffeff +/* The reset value of the ALT_CLKMGR_MAINPLL_EN_CFGCLK register field. */ +#define ALT_CLKMGR_MAINPLL_EN_CFGCLK_RESET 0x1 +/* Extracts the ALT_CLKMGR_MAINPLL_EN_CFGCLK field value from a register. */ +#define ALT_CLKMGR_MAINPLL_EN_CFGCLK_GET(value) (((value) & 0x00000100) >> 8) +/* Produces a ALT_CLKMGR_MAINPLL_EN_CFGCLK register field value suitable for setting the register. */ +#define ALT_CLKMGR_MAINPLL_EN_CFGCLK_SET(value) (((value) << 8) & 0x00000100) + +/* + * Field : s2f_user0_clk Enable - s2fuser0clk + * + * Enables clock s2f_user0_clk output. + * + * Qsys and user documenation refer to s2f_user0_clk as h2f_user0_clk. + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_MAINPLL_EN_S2FUSER0CLK register field. */ +#define ALT_CLKMGR_MAINPLL_EN_S2FUSER0CLK_LSB 9 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_MAINPLL_EN_S2FUSER0CLK register field. */ +#define ALT_CLKMGR_MAINPLL_EN_S2FUSER0CLK_MSB 9 +/* The width in bits of the ALT_CLKMGR_MAINPLL_EN_S2FUSER0CLK register field. */ +#define ALT_CLKMGR_MAINPLL_EN_S2FUSER0CLK_WIDTH 1 +/* The mask used to set the ALT_CLKMGR_MAINPLL_EN_S2FUSER0CLK register field value. */ +#define ALT_CLKMGR_MAINPLL_EN_S2FUSER0CLK_SET_MSK 0x00000200 +/* The mask used to clear the ALT_CLKMGR_MAINPLL_EN_S2FUSER0CLK register field value. */ +#define ALT_CLKMGR_MAINPLL_EN_S2FUSER0CLK_CLR_MSK 0xfffffdff +/* The reset value of the ALT_CLKMGR_MAINPLL_EN_S2FUSER0CLK register field. */ +#define ALT_CLKMGR_MAINPLL_EN_S2FUSER0CLK_RESET 0x1 +/* Extracts the ALT_CLKMGR_MAINPLL_EN_S2FUSER0CLK field value from a register. */ +#define ALT_CLKMGR_MAINPLL_EN_S2FUSER0CLK_GET(value) (((value) & 0x00000200) >> 9) +/* Produces a ALT_CLKMGR_MAINPLL_EN_S2FUSER0CLK register field value suitable for setting the register. */ +#define ALT_CLKMGR_MAINPLL_EN_S2FUSER0CLK_SET(value) (((value) << 9) & 0x00000200) + +#ifndef __ASSEMBLY__ +/* + * WARNING: The C register and register group struct declarations are provided for + * convenience and illustrative purposes. They should, however, be used with + * caution as the C language standard provides no guarantees about the alignment or + * atomicity of device memory accesses. The recommended practice for writing + * hardware drivers is to use the SoCAL access macros and alt_read_word() and + * alt_write_word() functions. + * + * The struct declaration for register ALT_CLKMGR_MAINPLL_EN. + */ +struct ALT_CLKMGR_MAINPLL_EN_s +{ + uint32_t l4mainclk : 1; /* l4_main_clk Enable */ + uint32_t l3mpclk : 1; /* l3_mp_clk Enable */ + uint32_t l4mpclk : 1; /* l4_mp_clk Enable */ + uint32_t l4spclk : 1; /* l4_sp_clk Enable */ + uint32_t dbgatclk : 1; /* dbg_at_clk Enable */ + uint32_t dbgclk : 1; /* dbg_clk Enable */ + uint32_t dbgtraceclk : 1; /* dbg_trace_clk Enable */ + uint32_t dbgtimerclk : 1; /* dbg_timer_clk Enable */ + uint32_t cfgclk : 1; /* cfg_clk Enable */ + uint32_t s2fuser0clk : 1; /* s2f_user0_clk Enable */ + uint32_t : 22; /* *UNDEFINED* */ +}; + +/* The typedef declaration for register ALT_CLKMGR_MAINPLL_EN. */ +typedef volatile struct ALT_CLKMGR_MAINPLL_EN_s ALT_CLKMGR_MAINPLL_EN_t; +#endif /* __ASSEMBLY__ */ + +/* The byte offset of the ALT_CLKMGR_MAINPLL_EN register from the beginning of the component. */ +#define ALT_CLKMGR_MAINPLL_EN_OFST 0x20 + +/* + * Register : Main Divide Register - maindiv + * + * Contains fields that control clock dividers for main clocks derived from the + * Main PLL + * + * Fields are only reset by a cold reset. + * + * Register Layout + * + * Bits | Access | Reset | Description + * :--------|:-------|:------|:-------------------- + * [1:0] | RW | 0x0 | L3 MP Clock Divider + * [3:2] | RW | 0x0 | L3 SP Clock Divider + * [6:4] | RW | 0x0 | L4 MP Clock Divider + * [9:7] | RW | 0x0 | L4 SP Clock Divider + * [31:10] | ??? | 0x0 | *UNDEFINED* + * + */ +/* + * Field : L3 MP Clock Divider - l3mpclk + * + * The l3_mp_clk is divided down from the l3_main_clk by the value specified in + * this field. + * + * Field Enumeration Values: + * + * Enum | Value | Description + * :------------------------------------------|:------|:------------ + * ALT_CLKMGR_MAINPLL_MAINDIV_L3MPCLK_E_DIV1 | 0x0 | Divide by 1 + * ALT_CLKMGR_MAINPLL_MAINDIV_L3MPCLK_E_DIV2 | 0x1 | Divide by 2 + * + * Field Access Macros: + * + */ +/* + * Enumerated value for register field ALT_CLKMGR_MAINPLL_MAINDIV_L3MPCLK + * + * Divide by 1 + */ +#define ALT_CLKMGR_MAINPLL_MAINDIV_L3MPCLK_E_DIV1 0x0 +/* + * Enumerated value for register field ALT_CLKMGR_MAINPLL_MAINDIV_L3MPCLK + * + * Divide by 2 + */ +#define ALT_CLKMGR_MAINPLL_MAINDIV_L3MPCLK_E_DIV2 0x1 + +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_MAINPLL_MAINDIV_L3MPCLK register field. */ +#define ALT_CLKMGR_MAINPLL_MAINDIV_L3MPCLK_LSB 0 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_MAINPLL_MAINDIV_L3MPCLK register field. */ +#define ALT_CLKMGR_MAINPLL_MAINDIV_L3MPCLK_MSB 1 +/* The width in bits of the ALT_CLKMGR_MAINPLL_MAINDIV_L3MPCLK register field. */ +#define ALT_CLKMGR_MAINPLL_MAINDIV_L3MPCLK_WIDTH 2 +/* The mask used to set the ALT_CLKMGR_MAINPLL_MAINDIV_L3MPCLK register field value. */ +#define ALT_CLKMGR_MAINPLL_MAINDIV_L3MPCLK_SET_MSK 0x00000003 +/* The mask used to clear the ALT_CLKMGR_MAINPLL_MAINDIV_L3MPCLK register field value. */ +#define ALT_CLKMGR_MAINPLL_MAINDIV_L3MPCLK_CLR_MSK 0xfffffffc +/* The reset value of the ALT_CLKMGR_MAINPLL_MAINDIV_L3MPCLK register field. */ +#define ALT_CLKMGR_MAINPLL_MAINDIV_L3MPCLK_RESET 0x0 +/* Extracts the ALT_CLKMGR_MAINPLL_MAINDIV_L3MPCLK field value from a register. */ +#define ALT_CLKMGR_MAINPLL_MAINDIV_L3MPCLK_GET(value) (((value) & 0x00000003) >> 0) +/* Produces a ALT_CLKMGR_MAINPLL_MAINDIV_L3MPCLK register field value suitable for setting the register. */ +#define ALT_CLKMGR_MAINPLL_MAINDIV_L3MPCLK_SET(value) (((value) << 0) & 0x00000003) + +/* + * Field : L3 SP Clock Divider - l3spclk + * + * The l3_sp_clk is divided down from the l3_mp_clk by the value specified in this + * field. + * + * Field Enumeration Values: + * + * Enum | Value | Description + * :------------------------------------------|:------|:------------ + * ALT_CLKMGR_MAINPLL_MAINDIV_L3SPCLK_E_DIV1 | 0x0 | Divide by 1 + * ALT_CLKMGR_MAINPLL_MAINDIV_L3SPCLK_E_DIV2 | 0x1 | Divide by 2 + * + * Field Access Macros: + * + */ +/* + * Enumerated value for register field ALT_CLKMGR_MAINPLL_MAINDIV_L3SPCLK + * + * Divide by 1 + */ +#define ALT_CLKMGR_MAINPLL_MAINDIV_L3SPCLK_E_DIV1 0x0 +/* + * Enumerated value for register field ALT_CLKMGR_MAINPLL_MAINDIV_L3SPCLK + * + * Divide by 2 + */ +#define ALT_CLKMGR_MAINPLL_MAINDIV_L3SPCLK_E_DIV2 0x1 + +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_MAINPLL_MAINDIV_L3SPCLK register field. */ +#define ALT_CLKMGR_MAINPLL_MAINDIV_L3SPCLK_LSB 2 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_MAINPLL_MAINDIV_L3SPCLK register field. */ +#define ALT_CLKMGR_MAINPLL_MAINDIV_L3SPCLK_MSB 3 +/* The width in bits of the ALT_CLKMGR_MAINPLL_MAINDIV_L3SPCLK register field. */ +#define ALT_CLKMGR_MAINPLL_MAINDIV_L3SPCLK_WIDTH 2 +/* The mask used to set the ALT_CLKMGR_MAINPLL_MAINDIV_L3SPCLK register field value. */ +#define ALT_CLKMGR_MAINPLL_MAINDIV_L3SPCLK_SET_MSK 0x0000000c +/* The mask used to clear the ALT_CLKMGR_MAINPLL_MAINDIV_L3SPCLK register field value. */ +#define ALT_CLKMGR_MAINPLL_MAINDIV_L3SPCLK_CLR_MSK 0xfffffff3 +/* The reset value of the ALT_CLKMGR_MAINPLL_MAINDIV_L3SPCLK register field. */ +#define ALT_CLKMGR_MAINPLL_MAINDIV_L3SPCLK_RESET 0x0 +/* Extracts the ALT_CLKMGR_MAINPLL_MAINDIV_L3SPCLK field value from a register. */ +#define ALT_CLKMGR_MAINPLL_MAINDIV_L3SPCLK_GET(value) (((value) & 0x0000000c) >> 2) +/* Produces a ALT_CLKMGR_MAINPLL_MAINDIV_L3SPCLK register field value suitable for setting the register. */ +#define ALT_CLKMGR_MAINPLL_MAINDIV_L3SPCLK_SET(value) (((value) << 2) & 0x0000000c) + +/* + * Field : L4 MP Clock Divider - l4mpclk + * + * The l4_mp_clk is divided down from the periph_base_clk by the value specified in + * this field. + * + * Field Enumeration Values: + * + * Enum | Value | Description + * :--------------------------------------------|:------|:------------- + * ALT_CLKMGR_MAINPLL_MAINDIV_L4MPCLK_E_DIV1 | 0x0 | Divide By 1 + * ALT_CLKMGR_MAINPLL_MAINDIV_L4MPCLK_E_DIV2 | 0x1 | Divide By 2 + * ALT_CLKMGR_MAINPLL_MAINDIV_L4MPCLK_E_DIV4 | 0x2 | Divide By 4 + * ALT_CLKMGR_MAINPLL_MAINDIV_L4MPCLK_E_DIV8 | 0x3 | Divide By 8 + * ALT_CLKMGR_MAINPLL_MAINDIV_L4MPCLK_E_DIV16 | 0x4 | Divide By 16 + * ALT_CLKMGR_MAINPLL_MAINDIV_L4MPCLK_E_RSVD_1 | 0x5 | Reserved + * ALT_CLKMGR_MAINPLL_MAINDIV_L4MPCLK_E_RSVD_2 | 0x6 | Reserved + * ALT_CLKMGR_MAINPLL_MAINDIV_L4MPCLK_E_RSVD_3 | 0x7 | Reserved + * + * Field Access Macros: + * + */ +/* + * Enumerated value for register field ALT_CLKMGR_MAINPLL_MAINDIV_L4MPCLK + * + * Divide By 1 + */ +#define ALT_CLKMGR_MAINPLL_MAINDIV_L4MPCLK_E_DIV1 0x0 +/* + * Enumerated value for register field ALT_CLKMGR_MAINPLL_MAINDIV_L4MPCLK + * + * Divide By 2 + */ +#define ALT_CLKMGR_MAINPLL_MAINDIV_L4MPCLK_E_DIV2 0x1 +/* + * Enumerated value for register field ALT_CLKMGR_MAINPLL_MAINDIV_L4MPCLK + * + * Divide By 4 + */ +#define ALT_CLKMGR_MAINPLL_MAINDIV_L4MPCLK_E_DIV4 0x2 +/* + * Enumerated value for register field ALT_CLKMGR_MAINPLL_MAINDIV_L4MPCLK + * + * Divide By 8 + */ +#define ALT_CLKMGR_MAINPLL_MAINDIV_L4MPCLK_E_DIV8 0x3 +/* + * Enumerated value for register field ALT_CLKMGR_MAINPLL_MAINDIV_L4MPCLK + * + * Divide By 16 + */ +#define ALT_CLKMGR_MAINPLL_MAINDIV_L4MPCLK_E_DIV16 0x4 +/* + * Enumerated value for register field ALT_CLKMGR_MAINPLL_MAINDIV_L4MPCLK + * + * Reserved + */ +#define ALT_CLKMGR_MAINPLL_MAINDIV_L4MPCLK_E_RSVD_1 0x5 +/* + * Enumerated value for register field ALT_CLKMGR_MAINPLL_MAINDIV_L4MPCLK + * + * Reserved + */ +#define ALT_CLKMGR_MAINPLL_MAINDIV_L4MPCLK_E_RSVD_2 0x6 +/* + * Enumerated value for register field ALT_CLKMGR_MAINPLL_MAINDIV_L4MPCLK + * + * Reserved + */ +#define ALT_CLKMGR_MAINPLL_MAINDIV_L4MPCLK_E_RSVD_3 0x7 + +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_MAINPLL_MAINDIV_L4MPCLK register field. */ +#define ALT_CLKMGR_MAINPLL_MAINDIV_L4MPCLK_LSB 4 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_MAINPLL_MAINDIV_L4MPCLK register field. */ +#define ALT_CLKMGR_MAINPLL_MAINDIV_L4MPCLK_MSB 6 +/* The width in bits of the ALT_CLKMGR_MAINPLL_MAINDIV_L4MPCLK register field. */ +#define ALT_CLKMGR_MAINPLL_MAINDIV_L4MPCLK_WIDTH 3 +/* The mask used to set the ALT_CLKMGR_MAINPLL_MAINDIV_L4MPCLK register field value. */ +#define ALT_CLKMGR_MAINPLL_MAINDIV_L4MPCLK_SET_MSK 0x00000070 +/* The mask used to clear the ALT_CLKMGR_MAINPLL_MAINDIV_L4MPCLK register field value. */ +#define ALT_CLKMGR_MAINPLL_MAINDIV_L4MPCLK_CLR_MSK 0xffffff8f +/* The reset value of the ALT_CLKMGR_MAINPLL_MAINDIV_L4MPCLK register field. */ +#define ALT_CLKMGR_MAINPLL_MAINDIV_L4MPCLK_RESET 0x0 +/* Extracts the ALT_CLKMGR_MAINPLL_MAINDIV_L4MPCLK field value from a register. */ +#define ALT_CLKMGR_MAINPLL_MAINDIV_L4MPCLK_GET(value) (((value) & 0x00000070) >> 4) +/* Produces a ALT_CLKMGR_MAINPLL_MAINDIV_L4MPCLK register field value suitable for setting the register. */ +#define ALT_CLKMGR_MAINPLL_MAINDIV_L4MPCLK_SET(value) (((value) << 4) & 0x00000070) + +/* + * Field : L4 SP Clock Divider - l4spclk + * + * The l4_sp_clk is divided down from the periph_base_clk by the value specified in + * this field. + * + * Field Enumeration Values: + * + * Enum | Value | Description + * :--------------------------------------------|:------|:------------- + * ALT_CLKMGR_MAINPLL_MAINDIV_L4SPCLK_E_DIV1 | 0x0 | Divide By 1 + * ALT_CLKMGR_MAINPLL_MAINDIV_L4SPCLK_E_DIV2 | 0x1 | Divide By 2 + * ALT_CLKMGR_MAINPLL_MAINDIV_L4SPCLK_E_DIV4 | 0x2 | Divide By 4 + * ALT_CLKMGR_MAINPLL_MAINDIV_L4SPCLK_E_DIV8 | 0x3 | Divide By 8 + * ALT_CLKMGR_MAINPLL_MAINDIV_L4SPCLK_E_DIV16 | 0x4 | Divide By 16 + * ALT_CLKMGR_MAINPLL_MAINDIV_L4SPCLK_E_RSVD_1 | 0x5 | Reserved + * ALT_CLKMGR_MAINPLL_MAINDIV_L4SPCLK_E_RSVD_2 | 0x6 | Reserved + * ALT_CLKMGR_MAINPLL_MAINDIV_L4SPCLK_E_RSVD_3 | 0x7 | Reserved + * + * Field Access Macros: + * + */ +/* + * Enumerated value for register field ALT_CLKMGR_MAINPLL_MAINDIV_L4SPCLK + * + * Divide By 1 + */ +#define ALT_CLKMGR_MAINPLL_MAINDIV_L4SPCLK_E_DIV1 0x0 +/* + * Enumerated value for register field ALT_CLKMGR_MAINPLL_MAINDIV_L4SPCLK + * + * Divide By 2 + */ +#define ALT_CLKMGR_MAINPLL_MAINDIV_L4SPCLK_E_DIV2 0x1 +/* + * Enumerated value for register field ALT_CLKMGR_MAINPLL_MAINDIV_L4SPCLK + * + * Divide By 4 + */ +#define ALT_CLKMGR_MAINPLL_MAINDIV_L4SPCLK_E_DIV4 0x2 +/* + * Enumerated value for register field ALT_CLKMGR_MAINPLL_MAINDIV_L4SPCLK + * + * Divide By 8 + */ +#define ALT_CLKMGR_MAINPLL_MAINDIV_L4SPCLK_E_DIV8 0x3 +/* + * Enumerated value for register field ALT_CLKMGR_MAINPLL_MAINDIV_L4SPCLK + * + * Divide By 16 + */ +#define ALT_CLKMGR_MAINPLL_MAINDIV_L4SPCLK_E_DIV16 0x4 +/* + * Enumerated value for register field ALT_CLKMGR_MAINPLL_MAINDIV_L4SPCLK + * + * Reserved + */ +#define ALT_CLKMGR_MAINPLL_MAINDIV_L4SPCLK_E_RSVD_1 0x5 +/* + * Enumerated value for register field ALT_CLKMGR_MAINPLL_MAINDIV_L4SPCLK + * + * Reserved + */ +#define ALT_CLKMGR_MAINPLL_MAINDIV_L4SPCLK_E_RSVD_2 0x6 +/* + * Enumerated value for register field ALT_CLKMGR_MAINPLL_MAINDIV_L4SPCLK + * + * Reserved + */ +#define ALT_CLKMGR_MAINPLL_MAINDIV_L4SPCLK_E_RSVD_3 0x7 + +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_MAINPLL_MAINDIV_L4SPCLK register field. */ +#define ALT_CLKMGR_MAINPLL_MAINDIV_L4SPCLK_LSB 7 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_MAINPLL_MAINDIV_L4SPCLK register field. */ +#define ALT_CLKMGR_MAINPLL_MAINDIV_L4SPCLK_MSB 9 +/* The width in bits of the ALT_CLKMGR_MAINPLL_MAINDIV_L4SPCLK register field. */ +#define ALT_CLKMGR_MAINPLL_MAINDIV_L4SPCLK_WIDTH 3 +/* The mask used to set the ALT_CLKMGR_MAINPLL_MAINDIV_L4SPCLK register field value. */ +#define ALT_CLKMGR_MAINPLL_MAINDIV_L4SPCLK_SET_MSK 0x00000380 +/* The mask used to clear the ALT_CLKMGR_MAINPLL_MAINDIV_L4SPCLK register field value. */ +#define ALT_CLKMGR_MAINPLL_MAINDIV_L4SPCLK_CLR_MSK 0xfffffc7f +/* The reset value of the ALT_CLKMGR_MAINPLL_MAINDIV_L4SPCLK register field. */ +#define ALT_CLKMGR_MAINPLL_MAINDIV_L4SPCLK_RESET 0x0 +/* Extracts the ALT_CLKMGR_MAINPLL_MAINDIV_L4SPCLK field value from a register. */ +#define ALT_CLKMGR_MAINPLL_MAINDIV_L4SPCLK_GET(value) (((value) & 0x00000380) >> 7) +/* Produces a ALT_CLKMGR_MAINPLL_MAINDIV_L4SPCLK register field value suitable for setting the register. */ +#define ALT_CLKMGR_MAINPLL_MAINDIV_L4SPCLK_SET(value) (((value) << 7) & 0x00000380) + +#ifndef __ASSEMBLY__ +/* + * WARNING: The C register and register group struct declarations are provided for + * convenience and illustrative purposes. They should, however, be used with + * caution as the C language standard provides no guarantees about the alignment or + * atomicity of device memory accesses. The recommended practice for writing + * hardware drivers is to use the SoCAL access macros and alt_read_word() and + * alt_write_word() functions. + * + * The struct declaration for register ALT_CLKMGR_MAINPLL_MAINDIV. + */ +struct ALT_CLKMGR_MAINPLL_MAINDIV_s +{ + uint32_t l3mpclk : 2; /* L3 MP Clock Divider */ + uint32_t l3spclk : 2; /* L3 SP Clock Divider */ + uint32_t l4mpclk : 3; /* L4 MP Clock Divider */ + uint32_t l4spclk : 3; /* L4 SP Clock Divider */ + uint32_t : 22; /* *UNDEFINED* */ +}; + +/* The typedef declaration for register ALT_CLKMGR_MAINPLL_MAINDIV. */ +typedef volatile struct ALT_CLKMGR_MAINPLL_MAINDIV_s ALT_CLKMGR_MAINPLL_MAINDIV_t; +#endif /* __ASSEMBLY__ */ + +/* The byte offset of the ALT_CLKMGR_MAINPLL_MAINDIV register from the beginning of the component. */ +#define ALT_CLKMGR_MAINPLL_MAINDIV_OFST 0x24 + +/* + * Register : Debug Divide Register - dbgdiv + * + * Contains fields that control clock dividers for debug clocks derived from the + * Main PLL + * + * Fields are only reset by a cold reset. + * + * Register Layout + * + * Bits | Access | Reset | Description + * :-------|:-------|:------|:----------------------- + * [1:0] | RW | 0x0 | Debug AT Clock Divider + * [3:2] | RW | 0x1 | Debug Clock Divider + * [31:4] | ??? | 0x0 | *UNDEFINED* + * + */ +/* + * Field : Debug AT Clock Divider - dbgatclk + * + * The dbg_at_clk is divided down from the C2 output of the Main PLL by the value + * specified in this field. + * + * Field Enumeration Values: + * + * Enum | Value | Description + * :------------------------------------------|:------|:------------ + * ALT_CLKMGR_MAINPLL_DBGDIV_DBGATCLK_E_DIV1 | 0x0 | Divide by 1 + * ALT_CLKMGR_MAINPLL_DBGDIV_DBGATCLK_E_DIV2 | 0x1 | Divide by 2 + * ALT_CLKMGR_MAINPLL_DBGDIV_DBGATCLK_E_DIV4 | 0x2 | Divide by 4 + * + * Field Access Macros: + * + */ +/* + * Enumerated value for register field ALT_CLKMGR_MAINPLL_DBGDIV_DBGATCLK + * + * Divide by 1 + */ +#define ALT_CLKMGR_MAINPLL_DBGDIV_DBGATCLK_E_DIV1 0x0 +/* + * Enumerated value for register field ALT_CLKMGR_MAINPLL_DBGDIV_DBGATCLK + * + * Divide by 2 + */ +#define ALT_CLKMGR_MAINPLL_DBGDIV_DBGATCLK_E_DIV2 0x1 +/* + * Enumerated value for register field ALT_CLKMGR_MAINPLL_DBGDIV_DBGATCLK + * + * Divide by 4 + */ +#define ALT_CLKMGR_MAINPLL_DBGDIV_DBGATCLK_E_DIV4 0x2 + +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_MAINPLL_DBGDIV_DBGATCLK register field. */ +#define ALT_CLKMGR_MAINPLL_DBGDIV_DBGATCLK_LSB 0 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_MAINPLL_DBGDIV_DBGATCLK register field. */ +#define ALT_CLKMGR_MAINPLL_DBGDIV_DBGATCLK_MSB 1 +/* The width in bits of the ALT_CLKMGR_MAINPLL_DBGDIV_DBGATCLK register field. */ +#define ALT_CLKMGR_MAINPLL_DBGDIV_DBGATCLK_WIDTH 2 +/* The mask used to set the ALT_CLKMGR_MAINPLL_DBGDIV_DBGATCLK register field value. */ +#define ALT_CLKMGR_MAINPLL_DBGDIV_DBGATCLK_SET_MSK 0x00000003 +/* The mask used to clear the ALT_CLKMGR_MAINPLL_DBGDIV_DBGATCLK register field value. */ +#define ALT_CLKMGR_MAINPLL_DBGDIV_DBGATCLK_CLR_MSK 0xfffffffc +/* The reset value of the ALT_CLKMGR_MAINPLL_DBGDIV_DBGATCLK register field. */ +#define ALT_CLKMGR_MAINPLL_DBGDIV_DBGATCLK_RESET 0x0 +/* Extracts the ALT_CLKMGR_MAINPLL_DBGDIV_DBGATCLK field value from a register. */ +#define ALT_CLKMGR_MAINPLL_DBGDIV_DBGATCLK_GET(value) (((value) & 0x00000003) >> 0) +/* Produces a ALT_CLKMGR_MAINPLL_DBGDIV_DBGATCLK register field value suitable for setting the register. */ +#define ALT_CLKMGR_MAINPLL_DBGDIV_DBGATCLK_SET(value) (((value) << 0) & 0x00000003) + +/* + * Field : Debug Clock Divider - dbgclk + * + * The dbg_clk is divided down from the dbg_at_clk by the value specified in this + * field. + * + * Field Enumeration Values: + * + * Enum | Value | Description + * :----------------------------------------|:------|:------------ + * ALT_CLKMGR_MAINPLL_DBGDIV_DBGCLK_E_DIV2 | 0x1 | Divide by 2 + * ALT_CLKMGR_MAINPLL_DBGDIV_DBGCLK_E_DIV4 | 0x2 | Divide by 4 + * + * Field Access Macros: + * + */ +/* + * Enumerated value for register field ALT_CLKMGR_MAINPLL_DBGDIV_DBGCLK + * + * Divide by 2 + */ +#define ALT_CLKMGR_MAINPLL_DBGDIV_DBGCLK_E_DIV2 0x1 +/* + * Enumerated value for register field ALT_CLKMGR_MAINPLL_DBGDIV_DBGCLK + * + * Divide by 4 + */ +#define ALT_CLKMGR_MAINPLL_DBGDIV_DBGCLK_E_DIV4 0x2 + +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_MAINPLL_DBGDIV_DBGCLK register field. */ +#define ALT_CLKMGR_MAINPLL_DBGDIV_DBGCLK_LSB 2 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_MAINPLL_DBGDIV_DBGCLK register field. */ +#define ALT_CLKMGR_MAINPLL_DBGDIV_DBGCLK_MSB 3 +/* The width in bits of the ALT_CLKMGR_MAINPLL_DBGDIV_DBGCLK register field. */ +#define ALT_CLKMGR_MAINPLL_DBGDIV_DBGCLK_WIDTH 2 +/* The mask used to set the ALT_CLKMGR_MAINPLL_DBGDIV_DBGCLK register field value. */ +#define ALT_CLKMGR_MAINPLL_DBGDIV_DBGCLK_SET_MSK 0x0000000c +/* The mask used to clear the ALT_CLKMGR_MAINPLL_DBGDIV_DBGCLK register field value. */ +#define ALT_CLKMGR_MAINPLL_DBGDIV_DBGCLK_CLR_MSK 0xfffffff3 +/* The reset value of the ALT_CLKMGR_MAINPLL_DBGDIV_DBGCLK register field. */ +#define ALT_CLKMGR_MAINPLL_DBGDIV_DBGCLK_RESET 0x1 +/* Extracts the ALT_CLKMGR_MAINPLL_DBGDIV_DBGCLK field value from a register. */ +#define ALT_CLKMGR_MAINPLL_DBGDIV_DBGCLK_GET(value) (((value) & 0x0000000c) >> 2) +/* Produces a ALT_CLKMGR_MAINPLL_DBGDIV_DBGCLK register field value suitable for setting the register. */ +#define ALT_CLKMGR_MAINPLL_DBGDIV_DBGCLK_SET(value) (((value) << 2) & 0x0000000c) + +#ifndef __ASSEMBLY__ +/* + * WARNING: The C register and register group struct declarations are provided for + * convenience and illustrative purposes. They should, however, be used with + * caution as the C language standard provides no guarantees about the alignment or + * atomicity of device memory accesses. The recommended practice for writing + * hardware drivers is to use the SoCAL access macros and alt_read_word() and + * alt_write_word() functions. + * + * The struct declaration for register ALT_CLKMGR_MAINPLL_DBGDIV. + */ +struct ALT_CLKMGR_MAINPLL_DBGDIV_s +{ + uint32_t dbgatclk : 2; /* Debug AT Clock Divider */ + uint32_t dbgclk : 2; /* Debug Clock Divider */ + uint32_t : 28; /* *UNDEFINED* */ +}; + +/* The typedef declaration for register ALT_CLKMGR_MAINPLL_DBGDIV. */ +typedef volatile struct ALT_CLKMGR_MAINPLL_DBGDIV_s ALT_CLKMGR_MAINPLL_DBGDIV_t; +#endif /* __ASSEMBLY__ */ + +/* The byte offset of the ALT_CLKMGR_MAINPLL_DBGDIV register from the beginning of the component. */ +#define ALT_CLKMGR_MAINPLL_DBGDIV_OFST 0x28 + +/* + * Register : Debug Trace Divide Register - tracediv + * + * Contains a field that controls the clock divider for the debug trace clock + * derived from the Main PLL + * + * Only reset by a cold reset. + * + * Register Layout + * + * Bits | Access | Reset | Description + * :-------|:-------|:------|:-------------------------- + * [2:0] | RW | 0x0 | Debug Trace Clock Divider + * [31:3] | ??? | 0x0 | *UNDEFINED* + * + */ +/* + * Field : Debug Trace Clock Divider - traceclk + * + * The dbg_trace_clk is divided down from the C2 output of the Main PLL by the + * value specified in this field. + * + * Field Enumeration Values: + * + * Enum | Value | Description + * :----------------------------------------------|:------|:------------- + * ALT_CLKMGR_MAINPLL_TRACEDIV_TRACECLK_E_DIV1 | 0x0 | Divide By 1 + * ALT_CLKMGR_MAINPLL_TRACEDIV_TRACECLK_E_DIV2 | 0x1 | Divide By 2 + * ALT_CLKMGR_MAINPLL_TRACEDIV_TRACECLK_E_DIV4 | 0x2 | Divide By 4 + * ALT_CLKMGR_MAINPLL_TRACEDIV_TRACECLK_E_DIV8 | 0x3 | Divide By 8 + * ALT_CLKMGR_MAINPLL_TRACEDIV_TRACECLK_E_DIV16 | 0x4 | Divide By 16 + * ALT_CLKMGR_MAINPLL_TRACEDIV_TRACECLK_E_RSVD_1 | 0x5 | Reserved + * ALT_CLKMGR_MAINPLL_TRACEDIV_TRACECLK_E_RSVD_2 | 0x6 | Reserved + * ALT_CLKMGR_MAINPLL_TRACEDIV_TRACECLK_E_RSVD_3 | 0x7 | Reserved + * + * Field Access Macros: + * + */ +/* + * Enumerated value for register field ALT_CLKMGR_MAINPLL_TRACEDIV_TRACECLK + * + * Divide By 1 + */ +#define ALT_CLKMGR_MAINPLL_TRACEDIV_TRACECLK_E_DIV1 0x0 +/* + * Enumerated value for register field ALT_CLKMGR_MAINPLL_TRACEDIV_TRACECLK + * + * Divide By 2 + */ +#define ALT_CLKMGR_MAINPLL_TRACEDIV_TRACECLK_E_DIV2 0x1 +/* + * Enumerated value for register field ALT_CLKMGR_MAINPLL_TRACEDIV_TRACECLK + * + * Divide By 4 + */ +#define ALT_CLKMGR_MAINPLL_TRACEDIV_TRACECLK_E_DIV4 0x2 +/* + * Enumerated value for register field ALT_CLKMGR_MAINPLL_TRACEDIV_TRACECLK + * + * Divide By 8 + */ +#define ALT_CLKMGR_MAINPLL_TRACEDIV_TRACECLK_E_DIV8 0x3 +/* + * Enumerated value for register field ALT_CLKMGR_MAINPLL_TRACEDIV_TRACECLK + * + * Divide By 16 + */ +#define ALT_CLKMGR_MAINPLL_TRACEDIV_TRACECLK_E_DIV16 0x4 +/* + * Enumerated value for register field ALT_CLKMGR_MAINPLL_TRACEDIV_TRACECLK + * + * Reserved + */ +#define ALT_CLKMGR_MAINPLL_TRACEDIV_TRACECLK_E_RSVD_1 0x5 +/* + * Enumerated value for register field ALT_CLKMGR_MAINPLL_TRACEDIV_TRACECLK + * + * Reserved + */ +#define ALT_CLKMGR_MAINPLL_TRACEDIV_TRACECLK_E_RSVD_2 0x6 +/* + * Enumerated value for register field ALT_CLKMGR_MAINPLL_TRACEDIV_TRACECLK + * + * Reserved + */ +#define ALT_CLKMGR_MAINPLL_TRACEDIV_TRACECLK_E_RSVD_3 0x7 + +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_MAINPLL_TRACEDIV_TRACECLK register field. */ +#define ALT_CLKMGR_MAINPLL_TRACEDIV_TRACECLK_LSB 0 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_MAINPLL_TRACEDIV_TRACECLK register field. */ +#define ALT_CLKMGR_MAINPLL_TRACEDIV_TRACECLK_MSB 2 +/* The width in bits of the ALT_CLKMGR_MAINPLL_TRACEDIV_TRACECLK register field. */ +#define ALT_CLKMGR_MAINPLL_TRACEDIV_TRACECLK_WIDTH 3 +/* The mask used to set the ALT_CLKMGR_MAINPLL_TRACEDIV_TRACECLK register field value. */ +#define ALT_CLKMGR_MAINPLL_TRACEDIV_TRACECLK_SET_MSK 0x00000007 +/* The mask used to clear the ALT_CLKMGR_MAINPLL_TRACEDIV_TRACECLK register field value. */ +#define ALT_CLKMGR_MAINPLL_TRACEDIV_TRACECLK_CLR_MSK 0xfffffff8 +/* The reset value of the ALT_CLKMGR_MAINPLL_TRACEDIV_TRACECLK register field. */ +#define ALT_CLKMGR_MAINPLL_TRACEDIV_TRACECLK_RESET 0x0 +/* Extracts the ALT_CLKMGR_MAINPLL_TRACEDIV_TRACECLK field value from a register. */ +#define ALT_CLKMGR_MAINPLL_TRACEDIV_TRACECLK_GET(value) (((value) & 0x00000007) >> 0) +/* Produces a ALT_CLKMGR_MAINPLL_TRACEDIV_TRACECLK register field value suitable for setting the register. */ +#define ALT_CLKMGR_MAINPLL_TRACEDIV_TRACECLK_SET(value) (((value) << 0) & 0x00000007) + +#ifndef __ASSEMBLY__ +/* + * WARNING: The C register and register group struct declarations are provided for + * convenience and illustrative purposes. They should, however, be used with + * caution as the C language standard provides no guarantees about the alignment or + * atomicity of device memory accesses. The recommended practice for writing + * hardware drivers is to use the SoCAL access macros and alt_read_word() and + * alt_write_word() functions. + * + * The struct declaration for register ALT_CLKMGR_MAINPLL_TRACEDIV. + */ +struct ALT_CLKMGR_MAINPLL_TRACEDIV_s +{ + uint32_t traceclk : 3; /* Debug Trace Clock Divider */ + uint32_t : 29; /* *UNDEFINED* */ +}; + +/* The typedef declaration for register ALT_CLKMGR_MAINPLL_TRACEDIV. */ +typedef volatile struct ALT_CLKMGR_MAINPLL_TRACEDIV_s ALT_CLKMGR_MAINPLL_TRACEDIV_t; +#endif /* __ASSEMBLY__ */ + +/* The byte offset of the ALT_CLKMGR_MAINPLL_TRACEDIV register from the beginning of the component. */ +#define ALT_CLKMGR_MAINPLL_TRACEDIV_OFST 0x2c + +/* + * Register : L4 MP SP APB Clock Source - l4src + * + * Contains fields that select the clock source for L4 MP and SP APB interconnect + * + * Fields are only reset by a cold reset. + * + * Register Layout + * + * Bits | Access | Reset | Description + * :-------|:-------|:------|:----------------- + * [0] | RW | 0x0 | l4_mp_clk Source + * [1] | RW | 0x0 | l4_sp_clk Source + * [31:2] | ??? | 0x0 | *UNDEFINED* + * + */ +/* + * Field : l4_mp_clk Source - l4mp + * + * Selects the source for l4_mp_clk + * + * Field Enumeration Values: + * + * Enum | Value | Description + * :------------------------------------------|:------|:---------------- + * ALT_CLKMGR_MAINPLL_L4SRC_L4MP_E_MAINPLL | 0x0 | main_clk + * ALT_CLKMGR_MAINPLL_L4SRC_L4MP_E_PERIPHPLL | 0x1 | periph_base_clk + * + * Field Access Macros: + * + */ +/* + * Enumerated value for register field ALT_CLKMGR_MAINPLL_L4SRC_L4MP + * + * main_clk + */ +#define ALT_CLKMGR_MAINPLL_L4SRC_L4MP_E_MAINPLL 0x0 +/* + * Enumerated value for register field ALT_CLKMGR_MAINPLL_L4SRC_L4MP + * + * periph_base_clk + */ +#define ALT_CLKMGR_MAINPLL_L4SRC_L4MP_E_PERIPHPLL 0x1 + +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_MAINPLL_L4SRC_L4MP register field. */ +#define ALT_CLKMGR_MAINPLL_L4SRC_L4MP_LSB 0 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_MAINPLL_L4SRC_L4MP register field. */ +#define ALT_CLKMGR_MAINPLL_L4SRC_L4MP_MSB 0 +/* The width in bits of the ALT_CLKMGR_MAINPLL_L4SRC_L4MP register field. */ +#define ALT_CLKMGR_MAINPLL_L4SRC_L4MP_WIDTH 1 +/* The mask used to set the ALT_CLKMGR_MAINPLL_L4SRC_L4MP register field value. */ +#define ALT_CLKMGR_MAINPLL_L4SRC_L4MP_SET_MSK 0x00000001 +/* The mask used to clear the ALT_CLKMGR_MAINPLL_L4SRC_L4MP register field value. */ +#define ALT_CLKMGR_MAINPLL_L4SRC_L4MP_CLR_MSK 0xfffffffe +/* The reset value of the ALT_CLKMGR_MAINPLL_L4SRC_L4MP register field. */ +#define ALT_CLKMGR_MAINPLL_L4SRC_L4MP_RESET 0x0 +/* Extracts the ALT_CLKMGR_MAINPLL_L4SRC_L4MP field value from a register. */ +#define ALT_CLKMGR_MAINPLL_L4SRC_L4MP_GET(value) (((value) & 0x00000001) >> 0) +/* Produces a ALT_CLKMGR_MAINPLL_L4SRC_L4MP register field value suitable for setting the register. */ +#define ALT_CLKMGR_MAINPLL_L4SRC_L4MP_SET(value) (((value) << 0) & 0x00000001) + +/* + * Field : l4_sp_clk Source - l4sp + * + * Selects the source for l4_sp_clk + * + * Field Enumeration Values: + * + * Enum | Value | Description + * :------------------------------------------|:------|:---------------- + * ALT_CLKMGR_MAINPLL_L4SRC_L4SP_E_MAINPLL | 0x0 | main_clk + * ALT_CLKMGR_MAINPLL_L4SRC_L4SP_E_PERIPHPLL | 0x1 | periph_base_clk + * + * Field Access Macros: + * + */ +/* + * Enumerated value for register field ALT_CLKMGR_MAINPLL_L4SRC_L4SP + * + * main_clk + */ +#define ALT_CLKMGR_MAINPLL_L4SRC_L4SP_E_MAINPLL 0x0 +/* + * Enumerated value for register field ALT_CLKMGR_MAINPLL_L4SRC_L4SP + * + * periph_base_clk + */ +#define ALT_CLKMGR_MAINPLL_L4SRC_L4SP_E_PERIPHPLL 0x1 + +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_MAINPLL_L4SRC_L4SP register field. */ +#define ALT_CLKMGR_MAINPLL_L4SRC_L4SP_LSB 1 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_MAINPLL_L4SRC_L4SP register field. */ +#define ALT_CLKMGR_MAINPLL_L4SRC_L4SP_MSB 1 +/* The width in bits of the ALT_CLKMGR_MAINPLL_L4SRC_L4SP register field. */ +#define ALT_CLKMGR_MAINPLL_L4SRC_L4SP_WIDTH 1 +/* The mask used to set the ALT_CLKMGR_MAINPLL_L4SRC_L4SP register field value. */ +#define ALT_CLKMGR_MAINPLL_L4SRC_L4SP_SET_MSK 0x00000002 +/* The mask used to clear the ALT_CLKMGR_MAINPLL_L4SRC_L4SP register field value. */ +#define ALT_CLKMGR_MAINPLL_L4SRC_L4SP_CLR_MSK 0xfffffffd +/* The reset value of the ALT_CLKMGR_MAINPLL_L4SRC_L4SP register field. */ +#define ALT_CLKMGR_MAINPLL_L4SRC_L4SP_RESET 0x0 +/* Extracts the ALT_CLKMGR_MAINPLL_L4SRC_L4SP field value from a register. */ +#define ALT_CLKMGR_MAINPLL_L4SRC_L4SP_GET(value) (((value) & 0x00000002) >> 1) +/* Produces a ALT_CLKMGR_MAINPLL_L4SRC_L4SP register field value suitable for setting the register. */ +#define ALT_CLKMGR_MAINPLL_L4SRC_L4SP_SET(value) (((value) << 1) & 0x00000002) + +#ifndef __ASSEMBLY__ +/* + * WARNING: The C register and register group struct declarations are provided for + * convenience and illustrative purposes. They should, however, be used with + * caution as the C language standard provides no guarantees about the alignment or + * atomicity of device memory accesses. The recommended practice for writing + * hardware drivers is to use the SoCAL access macros and alt_read_word() and + * alt_write_word() functions. + * + * The struct declaration for register ALT_CLKMGR_MAINPLL_L4SRC. + */ +struct ALT_CLKMGR_MAINPLL_L4SRC_s +{ + uint32_t l4mp : 1; /* l4_mp_clk Source */ + uint32_t l4sp : 1; /* l4_sp_clk Source */ + uint32_t : 30; /* *UNDEFINED* */ +}; + +/* The typedef declaration for register ALT_CLKMGR_MAINPLL_L4SRC. */ +typedef volatile struct ALT_CLKMGR_MAINPLL_L4SRC_s ALT_CLKMGR_MAINPLL_L4SRC_t; +#endif /* __ASSEMBLY__ */ + +/* The byte offset of the ALT_CLKMGR_MAINPLL_L4SRC register from the beginning of the component. */ +#define ALT_CLKMGR_MAINPLL_L4SRC_OFST 0x30 + +/* + * Register : Main PLL Output Counter Reset Ack Status Register - stat + * + * Contains Output Clock Counter Reset acknowledge status. + * + * Register Layout + * + * Bits | Access | Reset | Description + * :-------|:-------|:------|:--------------------------------- + * [5:0] | R | 0x0 | Output Counter Reset Acknowledge + * [31:6] | ??? | 0x0 | *UNDEFINED* + * + */ +/* + * Field : Output Counter Reset Acknowledge - outresetack + * + * These read only bits per PLL output indicate that the PLL has received the + * Output Reset Counter request and has gracefully stopped the respective PLL + * output clock. + * + * For software to change the PLL output counter without producing glitches on the + * respective clock, SW must set the VCO register respective Output Counter Reset + * bit. Software then polls the respective Output Counter Reset Acknowledge bit in + * the Output Counter Reset Ack Status Register. Software then writes the + * appropriate counter register, and then clears the respective VCO register Output + * Counter Reset bit. + * + * The reset value of this bit is applied on a cold reset; warm reset has no affect + * on this bit. + * + * Field Enumeration Values: + * + * Enum | Value | Description + * :--------------------------------------------|:------|:------------------------------------- + * ALT_CLKMGR_MAINPLL_STAT_OUTRSTACK_E_IDLE | 0x0 | Idle + * ALT_CLKMGR_MAINPLL_STAT_OUTRSTACK_E_ACK_RXD | 0x1 | Output Counter Acknowledge received. + * + * Field Access Macros: + * + */ +/* + * Enumerated value for register field ALT_CLKMGR_MAINPLL_STAT_OUTRSTACK + * + * Idle + */ +#define ALT_CLKMGR_MAINPLL_STAT_OUTRSTACK_E_IDLE 0x0 +/* + * Enumerated value for register field ALT_CLKMGR_MAINPLL_STAT_OUTRSTACK + * + * Output Counter Acknowledge received. + */ +#define ALT_CLKMGR_MAINPLL_STAT_OUTRSTACK_E_ACK_RXD 0x1 + +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_MAINPLL_STAT_OUTRSTACK register field. */ +#define ALT_CLKMGR_MAINPLL_STAT_OUTRSTACK_LSB 0 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_MAINPLL_STAT_OUTRSTACK register field. */ +#define ALT_CLKMGR_MAINPLL_STAT_OUTRSTACK_MSB 5 +/* The width in bits of the ALT_CLKMGR_MAINPLL_STAT_OUTRSTACK register field. */ +#define ALT_CLKMGR_MAINPLL_STAT_OUTRSTACK_WIDTH 6 +/* The mask used to set the ALT_CLKMGR_MAINPLL_STAT_OUTRSTACK register field value. */ +#define ALT_CLKMGR_MAINPLL_STAT_OUTRSTACK_SET_MSK 0x0000003f +/* The mask used to clear the ALT_CLKMGR_MAINPLL_STAT_OUTRSTACK register field value. */ +#define ALT_CLKMGR_MAINPLL_STAT_OUTRSTACK_CLR_MSK 0xffffffc0 +/* The reset value of the ALT_CLKMGR_MAINPLL_STAT_OUTRSTACK register field. */ +#define ALT_CLKMGR_MAINPLL_STAT_OUTRSTACK_RESET 0x0 +/* Extracts the ALT_CLKMGR_MAINPLL_STAT_OUTRSTACK field value from a register. */ +#define ALT_CLKMGR_MAINPLL_STAT_OUTRSTACK_GET(value) (((value) & 0x0000003f) >> 0) +/* Produces a ALT_CLKMGR_MAINPLL_STAT_OUTRSTACK register field value suitable for setting the register. */ +#define ALT_CLKMGR_MAINPLL_STAT_OUTRSTACK_SET(value) (((value) << 0) & 0x0000003f) + +#ifndef __ASSEMBLY__ +/* + * WARNING: The C register and register group struct declarations are provided for + * convenience and illustrative purposes. They should, however, be used with + * caution as the C language standard provides no guarantees about the alignment or + * atomicity of device memory accesses. The recommended practice for writing + * hardware drivers is to use the SoCAL access macros and alt_read_word() and + * alt_write_word() functions. + * + * The struct declaration for register ALT_CLKMGR_MAINPLL_STAT. + */ +struct ALT_CLKMGR_MAINPLL_STAT_s +{ + const uint32_t outresetack : 6; /* Output Counter Reset Acknowledge */ + uint32_t : 26; /* *UNDEFINED* */ +}; + +/* The typedef declaration for register ALT_CLKMGR_MAINPLL_STAT. */ +typedef volatile struct ALT_CLKMGR_MAINPLL_STAT_s ALT_CLKMGR_MAINPLL_STAT_t; +#endif /* __ASSEMBLY__ */ + +/* The byte offset of the ALT_CLKMGR_MAINPLL_STAT register from the beginning of the component. */ +#define ALT_CLKMGR_MAINPLL_STAT_OFST 0x34 + +#ifndef __ASSEMBLY__ +/* + * WARNING: The C register and register group struct declarations are provided for + * convenience and illustrative purposes. They should, however, be used with + * caution as the C language standard provides no guarantees about the alignment or + * atomicity of device memory accesses. The recommended practice for writing + * hardware drivers is to use the SoCAL access macros and alt_read_word() and + * alt_write_word() functions. + * + * The struct declaration for register group ALT_CLKMGR_MAINPLL. + */ +struct ALT_CLKMGR_MAINPLL_s +{ + volatile ALT_CLKMGR_MAINPLL_VCO_t vco; /* ALT_CLKMGR_MAINPLL_VCO */ + volatile ALT_CLKMGR_MAINPLL_MISC_t misc; /* ALT_CLKMGR_MAINPLL_MISC */ + volatile ALT_CLKMGR_MAINPLL_MPUCLK_t mpuclk; /* ALT_CLKMGR_MAINPLL_MPUCLK */ + volatile ALT_CLKMGR_MAINPLL_MAINCLK_t mainclk; /* ALT_CLKMGR_MAINPLL_MAINCLK */ + volatile ALT_CLKMGR_MAINPLL_DBGATCLK_t dbgatclk; /* ALT_CLKMGR_MAINPLL_DBGATCLK */ + volatile ALT_CLKMGR_MAINPLL_MAINQSPICLK_t mainqspiclk; /* ALT_CLKMGR_MAINPLL_MAINQSPICLK */ + volatile ALT_CLKMGR_MAINPLL_MAINNANDSDMMCCLK_t mainnandsdmmcclk; /* ALT_CLKMGR_MAINPLL_MAINNANDSDMMCCLK */ + volatile ALT_CLKMGR_MAINPLL_CFGS2FUSER0CLK_t cfgs2fuser0clk; /* ALT_CLKMGR_MAINPLL_CFGS2FUSER0CLK */ + volatile ALT_CLKMGR_MAINPLL_EN_t en; /* ALT_CLKMGR_MAINPLL_EN */ + volatile ALT_CLKMGR_MAINPLL_MAINDIV_t maindiv; /* ALT_CLKMGR_MAINPLL_MAINDIV */ + volatile ALT_CLKMGR_MAINPLL_DBGDIV_t dbgdiv; /* ALT_CLKMGR_MAINPLL_DBGDIV */ + volatile ALT_CLKMGR_MAINPLL_TRACEDIV_t tracediv; /* ALT_CLKMGR_MAINPLL_TRACEDIV */ + volatile ALT_CLKMGR_MAINPLL_L4SRC_t l4src; /* ALT_CLKMGR_MAINPLL_L4SRC */ + volatile ALT_CLKMGR_MAINPLL_STAT_t stat; /* ALT_CLKMGR_MAINPLL_STAT */ + volatile uint32_t _pad_0x38_0x40[2]; /* *UNDEFINED* */ +}; + +/* The typedef declaration for register group ALT_CLKMGR_MAINPLL. */ +typedef volatile struct ALT_CLKMGR_MAINPLL_s ALT_CLKMGR_MAINPLL_t; +/* The struct declaration for the raw register contents of register group ALT_CLKMGR_MAINPLL. */ +struct ALT_CLKMGR_MAINPLL_raw_s +{ + volatile uint32_t vco; /* ALT_CLKMGR_MAINPLL_VCO */ + volatile uint32_t misc; /* ALT_CLKMGR_MAINPLL_MISC */ + volatile uint32_t mpuclk; /* ALT_CLKMGR_MAINPLL_MPUCLK */ + volatile uint32_t mainclk; /* ALT_CLKMGR_MAINPLL_MAINCLK */ + volatile uint32_t dbgatclk; /* ALT_CLKMGR_MAINPLL_DBGATCLK */ + volatile uint32_t mainqspiclk; /* ALT_CLKMGR_MAINPLL_MAINQSPICLK */ + volatile uint32_t mainnandsdmmcclk; /* ALT_CLKMGR_MAINPLL_MAINNANDSDMMCCLK */ + volatile uint32_t cfgs2fuser0clk; /* ALT_CLKMGR_MAINPLL_CFGS2FUSER0CLK */ + volatile uint32_t en; /* ALT_CLKMGR_MAINPLL_EN */ + volatile uint32_t maindiv; /* ALT_CLKMGR_MAINPLL_MAINDIV */ + volatile uint32_t dbgdiv; /* ALT_CLKMGR_MAINPLL_DBGDIV */ + volatile uint32_t tracediv; /* ALT_CLKMGR_MAINPLL_TRACEDIV */ + volatile uint32_t l4src; /* ALT_CLKMGR_MAINPLL_L4SRC */ + volatile uint32_t stat; /* ALT_CLKMGR_MAINPLL_STAT */ + volatile uint32_t _pad_0x38_0x40[2]; /* *UNDEFINED* */ +}; + +/* The typedef declaration for the raw register contents of register group ALT_CLKMGR_MAINPLL. */ +typedef volatile struct ALT_CLKMGR_MAINPLL_raw_s ALT_CLKMGR_MAINPLL_raw_t; +#endif /* __ASSEMBLY__ */ + + +/* + * Register Group : Peripheral PLL Group - ALT_CLKMGR_PERPLL + * Peripheral PLL Group + * + * Contains registers with settings for the Peripheral PLL. + * + */ +/* + * Register : Peripheral PLL VCO Control Register - vco + * + * Contains settings that control the Peripheral PLL VCO. The VCO output frequency + * is the input frequency multiplied by the numerator (M+1) and divided by the + * denominator (N+1). + * + * Fields are only reset by a cold reset. + * + * Register Layout + * + * Bits | Access | Reset | Description + * :--------|:-------|:------|:-------------------------------- + * [0] | RW | 0x1 | BG PWRDN + * [1] | RW | 0x0 | Enable + * [2] | RW | 0x1 | Power down + * [15:3] | RW | 0x1 | Numerator (M) + * [21:16] | RW | 0x1 | Denominator (N) + * [23:22] | RW | 0x0 | Clock Source + * [24] | RW | 0x0 | All Output Counter Reset + * [30:25] | RW | 0x0 | Output Counter Reset + * [31] | RW | 0x1 | External Regulator Input Select + * + */ +/* + * Field : BG PWRDN - bgpwrdn + * + * If '1', powers down bandgap. If '0', bandgap is not power down. + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_PERPLL_VCO_BGPWRDN register field. */ +#define ALT_CLKMGR_PERPLL_VCO_BGPWRDN_LSB 0 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_PERPLL_VCO_BGPWRDN register field. */ +#define ALT_CLKMGR_PERPLL_VCO_BGPWRDN_MSB 0 +/* The width in bits of the ALT_CLKMGR_PERPLL_VCO_BGPWRDN register field. */ +#define ALT_CLKMGR_PERPLL_VCO_BGPWRDN_WIDTH 1 +/* The mask used to set the ALT_CLKMGR_PERPLL_VCO_BGPWRDN register field value. */ +#define ALT_CLKMGR_PERPLL_VCO_BGPWRDN_SET_MSK 0x00000001 +/* The mask used to clear the ALT_CLKMGR_PERPLL_VCO_BGPWRDN register field value. */ +#define ALT_CLKMGR_PERPLL_VCO_BGPWRDN_CLR_MSK 0xfffffffe +/* The reset value of the ALT_CLKMGR_PERPLL_VCO_BGPWRDN register field. */ +#define ALT_CLKMGR_PERPLL_VCO_BGPWRDN_RESET 0x1 +/* Extracts the ALT_CLKMGR_PERPLL_VCO_BGPWRDN field value from a register. */ +#define ALT_CLKMGR_PERPLL_VCO_BGPWRDN_GET(value) (((value) & 0x00000001) >> 0) +/* Produces a ALT_CLKMGR_PERPLL_VCO_BGPWRDN register field value suitable for setting the register. */ +#define ALT_CLKMGR_PERPLL_VCO_BGPWRDN_SET(value) (((value) << 0) & 0x00000001) + +/* + * Field : Enable - en + * + * If '1', VCO is enabled. If '0', VCO is in reset. + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_PERPLL_VCO_EN register field. */ +#define ALT_CLKMGR_PERPLL_VCO_EN_LSB 1 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_PERPLL_VCO_EN register field. */ +#define ALT_CLKMGR_PERPLL_VCO_EN_MSB 1 +/* The width in bits of the ALT_CLKMGR_PERPLL_VCO_EN register field. */ +#define ALT_CLKMGR_PERPLL_VCO_EN_WIDTH 1 +/* The mask used to set the ALT_CLKMGR_PERPLL_VCO_EN register field value. */ +#define ALT_CLKMGR_PERPLL_VCO_EN_SET_MSK 0x00000002 +/* The mask used to clear the ALT_CLKMGR_PERPLL_VCO_EN register field value. */ +#define ALT_CLKMGR_PERPLL_VCO_EN_CLR_MSK 0xfffffffd +/* The reset value of the ALT_CLKMGR_PERPLL_VCO_EN register field. */ +#define ALT_CLKMGR_PERPLL_VCO_EN_RESET 0x0 +/* Extracts the ALT_CLKMGR_PERPLL_VCO_EN field value from a register. */ +#define ALT_CLKMGR_PERPLL_VCO_EN_GET(value) (((value) & 0x00000002) >> 1) +/* Produces a ALT_CLKMGR_PERPLL_VCO_EN register field value suitable for setting the register. */ +#define ALT_CLKMGR_PERPLL_VCO_EN_SET(value) (((value) << 1) & 0x00000002) + +/* + * Field : Power down - pwrdn + * + * If '1', power down analog circuitry. If '0', analog circuitry not powered down. + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_PERPLL_VCO_PWRDN register field. */ +#define ALT_CLKMGR_PERPLL_VCO_PWRDN_LSB 2 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_PERPLL_VCO_PWRDN register field. */ +#define ALT_CLKMGR_PERPLL_VCO_PWRDN_MSB 2 +/* The width in bits of the ALT_CLKMGR_PERPLL_VCO_PWRDN register field. */ +#define ALT_CLKMGR_PERPLL_VCO_PWRDN_WIDTH 1 +/* The mask used to set the ALT_CLKMGR_PERPLL_VCO_PWRDN register field value. */ +#define ALT_CLKMGR_PERPLL_VCO_PWRDN_SET_MSK 0x00000004 +/* The mask used to clear the ALT_CLKMGR_PERPLL_VCO_PWRDN register field value. */ +#define ALT_CLKMGR_PERPLL_VCO_PWRDN_CLR_MSK 0xfffffffb +/* The reset value of the ALT_CLKMGR_PERPLL_VCO_PWRDN register field. */ +#define ALT_CLKMGR_PERPLL_VCO_PWRDN_RESET 0x1 +/* Extracts the ALT_CLKMGR_PERPLL_VCO_PWRDN field value from a register. */ +#define ALT_CLKMGR_PERPLL_VCO_PWRDN_GET(value) (((value) & 0x00000004) >> 2) +/* Produces a ALT_CLKMGR_PERPLL_VCO_PWRDN register field value suitable for setting the register. */ +#define ALT_CLKMGR_PERPLL_VCO_PWRDN_SET(value) (((value) << 2) & 0x00000004) + +/* + * Field : Numerator (M) - numer + * + * Numerator in VCO output frequency equation. For incremental frequency change, if + * the new value lead to less than 20% of the frequency change, this value can be + * changed without resetting the PLL. The Numerator and Denominator can not be + * changed at the same time for incremental frequency changed. + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_PERPLL_VCO_NUMER register field. */ +#define ALT_CLKMGR_PERPLL_VCO_NUMER_LSB 3 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_PERPLL_VCO_NUMER register field. */ +#define ALT_CLKMGR_PERPLL_VCO_NUMER_MSB 15 +/* The width in bits of the ALT_CLKMGR_PERPLL_VCO_NUMER register field. */ +#define ALT_CLKMGR_PERPLL_VCO_NUMER_WIDTH 13 +/* The mask used to set the ALT_CLKMGR_PERPLL_VCO_NUMER register field value. */ +#define ALT_CLKMGR_PERPLL_VCO_NUMER_SET_MSK 0x0000fff8 +/* The mask used to clear the ALT_CLKMGR_PERPLL_VCO_NUMER register field value. */ +#define ALT_CLKMGR_PERPLL_VCO_NUMER_CLR_MSK 0xffff0007 +/* The reset value of the ALT_CLKMGR_PERPLL_VCO_NUMER register field. */ +#define ALT_CLKMGR_PERPLL_VCO_NUMER_RESET 0x1 +/* Extracts the ALT_CLKMGR_PERPLL_VCO_NUMER field value from a register. */ +#define ALT_CLKMGR_PERPLL_VCO_NUMER_GET(value) (((value) & 0x0000fff8) >> 3) +/* Produces a ALT_CLKMGR_PERPLL_VCO_NUMER register field value suitable for setting the register. */ +#define ALT_CLKMGR_PERPLL_VCO_NUMER_SET(value) (((value) << 3) & 0x0000fff8) + +/* + * Field : Denominator (N) - denom + * + * Denominator in VCO output frequency equation. For incremental frequency change, + * if the new value lead to less than 20% of the frequency change, this value can + * be changed without resetting the PLL. The Numerator and Denominator can not be + * changed at the same time for incremental frequency changed. + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_PERPLL_VCO_DENOM register field. */ +#define ALT_CLKMGR_PERPLL_VCO_DENOM_LSB 16 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_PERPLL_VCO_DENOM register field. */ +#define ALT_CLKMGR_PERPLL_VCO_DENOM_MSB 21 +/* The width in bits of the ALT_CLKMGR_PERPLL_VCO_DENOM register field. */ +#define ALT_CLKMGR_PERPLL_VCO_DENOM_WIDTH 6 +/* The mask used to set the ALT_CLKMGR_PERPLL_VCO_DENOM register field value. */ +#define ALT_CLKMGR_PERPLL_VCO_DENOM_SET_MSK 0x003f0000 +/* The mask used to clear the ALT_CLKMGR_PERPLL_VCO_DENOM register field value. */ +#define ALT_CLKMGR_PERPLL_VCO_DENOM_CLR_MSK 0xffc0ffff +/* The reset value of the ALT_CLKMGR_PERPLL_VCO_DENOM register field. */ +#define ALT_CLKMGR_PERPLL_VCO_DENOM_RESET 0x1 +/* Extracts the ALT_CLKMGR_PERPLL_VCO_DENOM field value from a register. */ +#define ALT_CLKMGR_PERPLL_VCO_DENOM_GET(value) (((value) & 0x003f0000) >> 16) +/* Produces a ALT_CLKMGR_PERPLL_VCO_DENOM register field value suitable for setting the register. */ +#define ALT_CLKMGR_PERPLL_VCO_DENOM_SET(value) (((value) << 16) & 0x003f0000) + +/* + * Field : Clock Source - psrc + * + * Controls the VCO input clock source. + * + * Qsys and user documenation refer to f2s_periph_ref_clk as f2h_periph_ref_clk. + * + * Field Enumeration Values: + * + * Enum | Value | Description + * :--------------------------------------------|:------|:------------------- + * ALT_CLKMGR_PERPLL_VCO_PSRC_E_EOSC1 | 0x0 | eosc1_clk + * ALT_CLKMGR_PERPLL_VCO_PSRC_E_EOSC2 | 0x1 | eosc2_clk + * ALT_CLKMGR_PERPLL_VCO_PSRC_E_F2S_PERIPH_REF | 0x2 | f2s_periph_ref_clk + * + * Field Access Macros: + * + */ +/* + * Enumerated value for register field ALT_CLKMGR_PERPLL_VCO_PSRC + * + * eosc1_clk + */ +#define ALT_CLKMGR_PERPLL_VCO_PSRC_E_EOSC1 0x0 +/* + * Enumerated value for register field ALT_CLKMGR_PERPLL_VCO_PSRC + * + * eosc2_clk + */ +#define ALT_CLKMGR_PERPLL_VCO_PSRC_E_EOSC2 0x1 +/* + * Enumerated value for register field ALT_CLKMGR_PERPLL_VCO_PSRC + * + * f2s_periph_ref_clk + */ +#define ALT_CLKMGR_PERPLL_VCO_PSRC_E_F2S_PERIPH_REF 0x2 + +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_PERPLL_VCO_PSRC register field. */ +#define ALT_CLKMGR_PERPLL_VCO_PSRC_LSB 22 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_PERPLL_VCO_PSRC register field. */ +#define ALT_CLKMGR_PERPLL_VCO_PSRC_MSB 23 +/* The width in bits of the ALT_CLKMGR_PERPLL_VCO_PSRC register field. */ +#define ALT_CLKMGR_PERPLL_VCO_PSRC_WIDTH 2 +/* The mask used to set the ALT_CLKMGR_PERPLL_VCO_PSRC register field value. */ +#define ALT_CLKMGR_PERPLL_VCO_PSRC_SET_MSK 0x00c00000 +/* The mask used to clear the ALT_CLKMGR_PERPLL_VCO_PSRC register field value. */ +#define ALT_CLKMGR_PERPLL_VCO_PSRC_CLR_MSK 0xff3fffff +/* The reset value of the ALT_CLKMGR_PERPLL_VCO_PSRC register field. */ +#define ALT_CLKMGR_PERPLL_VCO_PSRC_RESET 0x0 +/* Extracts the ALT_CLKMGR_PERPLL_VCO_PSRC field value from a register. */ +#define ALT_CLKMGR_PERPLL_VCO_PSRC_GET(value) (((value) & 0x00c00000) >> 22) +/* Produces a ALT_CLKMGR_PERPLL_VCO_PSRC register field value suitable for setting the register. */ +#define ALT_CLKMGR_PERPLL_VCO_PSRC_SET(value) (((value) << 22) & 0x00c00000) + +/* + * Field : All Output Counter Reset - outresetall + * + * Before releasing Bypass, All Output Counter Reset must be set and cleared by + * software for correct clock operation. + * + * If '1', Reset phase multiplexer and all output counter state. So that after the + * assertion all the clocks output are start from rising edge align. + * + * If '0', phase multiplexer and output counter state not reset and no change to + * the phase of the clock outputs. + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_PERPLL_VCO_OUTRSTALL register field. */ +#define ALT_CLKMGR_PERPLL_VCO_OUTRSTALL_LSB 24 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_PERPLL_VCO_OUTRSTALL register field. */ +#define ALT_CLKMGR_PERPLL_VCO_OUTRSTALL_MSB 24 +/* The width in bits of the ALT_CLKMGR_PERPLL_VCO_OUTRSTALL register field. */ +#define ALT_CLKMGR_PERPLL_VCO_OUTRSTALL_WIDTH 1 +/* The mask used to set the ALT_CLKMGR_PERPLL_VCO_OUTRSTALL register field value. */ +#define ALT_CLKMGR_PERPLL_VCO_OUTRSTALL_SET_MSK 0x01000000 +/* The mask used to clear the ALT_CLKMGR_PERPLL_VCO_OUTRSTALL register field value. */ +#define ALT_CLKMGR_PERPLL_VCO_OUTRSTALL_CLR_MSK 0xfeffffff +/* The reset value of the ALT_CLKMGR_PERPLL_VCO_OUTRSTALL register field. */ +#define ALT_CLKMGR_PERPLL_VCO_OUTRSTALL_RESET 0x0 +/* Extracts the ALT_CLKMGR_PERPLL_VCO_OUTRSTALL field value from a register. */ +#define ALT_CLKMGR_PERPLL_VCO_OUTRSTALL_GET(value) (((value) & 0x01000000) >> 24) +/* Produces a ALT_CLKMGR_PERPLL_VCO_OUTRSTALL register field value suitable for setting the register. */ +#define ALT_CLKMGR_PERPLL_VCO_OUTRSTALL_SET(value) (((value) << 24) & 0x01000000) + +/* + * Field : Output Counter Reset - outreset + * + * Resets the individual PLL output counter. + * + * For software to change the PLL output counter without producing glitches on the + * respective clock, SW must set the VCO register respective Output Counter Reset + * bit. Software then polls the respective Output Counter Reset Acknowledge bit in + * the Output Counter Reset Ack Status Register. Software then writes the + * appropriate counter register, and then clears the respective VCO register Output + * Counter Reset bit. + * + * LSB 'outreset[0]' corresponds to PLL output clock C0, etc. + * + * If set to '1', reset output divider, no clock output from counter. + * + * If set to '0', counter is not reset. + * + * The reset value of this bit is applied on a cold reset; warm reset has no affect + * on this bit. + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_PERPLL_VCO_OUTRST register field. */ +#define ALT_CLKMGR_PERPLL_VCO_OUTRST_LSB 25 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_PERPLL_VCO_OUTRST register field. */ +#define ALT_CLKMGR_PERPLL_VCO_OUTRST_MSB 30 +/* The width in bits of the ALT_CLKMGR_PERPLL_VCO_OUTRST register field. */ +#define ALT_CLKMGR_PERPLL_VCO_OUTRST_WIDTH 6 +/* The mask used to set the ALT_CLKMGR_PERPLL_VCO_OUTRST register field value. */ +#define ALT_CLKMGR_PERPLL_VCO_OUTRST_SET_MSK 0x7e000000 +/* The mask used to clear the ALT_CLKMGR_PERPLL_VCO_OUTRST register field value. */ +#define ALT_CLKMGR_PERPLL_VCO_OUTRST_CLR_MSK 0x81ffffff +/* The reset value of the ALT_CLKMGR_PERPLL_VCO_OUTRST register field. */ +#define ALT_CLKMGR_PERPLL_VCO_OUTRST_RESET 0x0 +/* Extracts the ALT_CLKMGR_PERPLL_VCO_OUTRST field value from a register. */ +#define ALT_CLKMGR_PERPLL_VCO_OUTRST_GET(value) (((value) & 0x7e000000) >> 25) +/* Produces a ALT_CLKMGR_PERPLL_VCO_OUTRST register field value suitable for setting the register. */ +#define ALT_CLKMGR_PERPLL_VCO_OUTRST_SET(value) (((value) << 25) & 0x7e000000) + +/* + * Field : External Regulator Input Select - regextsel + * + * If set to '1', the external regulator is selected for the PLL. + * + * If set to '0', the internal regulator is slected. + * + * It is strongly recommended to select the external regulator while the PLL is not + * enabled (in reset), and then disable the external regulater once the PLL + * becomes enabled. Software should simulateously update the 'Enable' bit and the + * 'External Regulator Input Select' in the same write access to the VCO register. + * When the 'Enable' bit is clear, the 'External Regulator Input Select' should be + * set, and vice versa. + * + * The reset value of this bit is applied on a cold reset; warm reset has no affect + * on this bit. + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_PERPLL_VCO_REGEXTSEL register field. */ +#define ALT_CLKMGR_PERPLL_VCO_REGEXTSEL_LSB 31 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_PERPLL_VCO_REGEXTSEL register field. */ +#define ALT_CLKMGR_PERPLL_VCO_REGEXTSEL_MSB 31 +/* The width in bits of the ALT_CLKMGR_PERPLL_VCO_REGEXTSEL register field. */ +#define ALT_CLKMGR_PERPLL_VCO_REGEXTSEL_WIDTH 1 +/* The mask used to set the ALT_CLKMGR_PERPLL_VCO_REGEXTSEL register field value. */ +#define ALT_CLKMGR_PERPLL_VCO_REGEXTSEL_SET_MSK 0x80000000 +/* The mask used to clear the ALT_CLKMGR_PERPLL_VCO_REGEXTSEL register field value. */ +#define ALT_CLKMGR_PERPLL_VCO_REGEXTSEL_CLR_MSK 0x7fffffff +/* The reset value of the ALT_CLKMGR_PERPLL_VCO_REGEXTSEL register field. */ +#define ALT_CLKMGR_PERPLL_VCO_REGEXTSEL_RESET 0x1 +/* Extracts the ALT_CLKMGR_PERPLL_VCO_REGEXTSEL field value from a register. */ +#define ALT_CLKMGR_PERPLL_VCO_REGEXTSEL_GET(value) (((value) & 0x80000000) >> 31) +/* Produces a ALT_CLKMGR_PERPLL_VCO_REGEXTSEL register field value suitable for setting the register. */ +#define ALT_CLKMGR_PERPLL_VCO_REGEXTSEL_SET(value) (((value) << 31) & 0x80000000) + +#ifndef __ASSEMBLY__ +/* + * WARNING: The C register and register group struct declarations are provided for + * convenience and illustrative purposes. They should, however, be used with + * caution as the C language standard provides no guarantees about the alignment or + * atomicity of device memory accesses. The recommended practice for writing + * hardware drivers is to use the SoCAL access macros and alt_read_word() and + * alt_write_word() functions. + * + * The struct declaration for register ALT_CLKMGR_PERPLL_VCO. + */ +struct ALT_CLKMGR_PERPLL_VCO_s +{ + uint32_t bgpwrdn : 1; /* BG PWRDN */ + uint32_t en : 1; /* Enable */ + uint32_t pwrdn : 1; /* Power down */ + uint32_t numer : 13; /* Numerator (M) */ + uint32_t denom : 6; /* Denominator (N) */ + uint32_t psrc : 2; /* Clock Source */ + uint32_t outresetall : 1; /* All Output Counter Reset */ + uint32_t outreset : 6; /* Output Counter Reset */ + uint32_t regextsel : 1; /* External Regulator Input Select */ +}; + +/* The typedef declaration for register ALT_CLKMGR_PERPLL_VCO. */ +typedef volatile struct ALT_CLKMGR_PERPLL_VCO_s ALT_CLKMGR_PERPLL_VCO_t; +#endif /* __ASSEMBLY__ */ + +/* The byte offset of the ALT_CLKMGR_PERPLL_VCO register from the beginning of the component. */ +#define ALT_CLKMGR_PERPLL_VCO_OFST 0x0 + +/* + * Register : Peripheral PLL VCO Advanced Control Register - misc + * + * Contains VCO control signals and other PLL control signals need to be + * controllable through register. + * + * Fields are only reset by a cold reset. + * + * Register Layout + * + * Bits | Access | Reset | Description + * :--------|:-------|:------|:------------------------------ + * [0] | RW | 0x0 | Loop Bandwidth Adjust Enabled + * [12:1] | RW | 0x1 | Loop Bandwidth Adjust + * [13] | RW | 0x0 | Fast Locking Enable + * [14] | RW | 0x1 | Saturation Enable + * [31:15] | ??? | 0x0 | *UNDEFINED* + * + */ +/* + * Field : Loop Bandwidth Adjust Enabled - bwadjen + * + * If set to 1, the Loop Bandwidth Adjust value comes from the Loop Bandwidth + * Adjust field. + * + * If set to 0, the Loop Bandwidth Adjust value equals the M field divided by 2 + * value of the VCO Control Register. The M divided by 2 is the upper 12 bits + * (12:1) of the M field in the VCO register. + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_PERPLL_MISC_BWADJEN register field. */ +#define ALT_CLKMGR_PERPLL_MISC_BWADJEN_LSB 0 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_PERPLL_MISC_BWADJEN register field. */ +#define ALT_CLKMGR_PERPLL_MISC_BWADJEN_MSB 0 +/* The width in bits of the ALT_CLKMGR_PERPLL_MISC_BWADJEN register field. */ +#define ALT_CLKMGR_PERPLL_MISC_BWADJEN_WIDTH 1 +/* The mask used to set the ALT_CLKMGR_PERPLL_MISC_BWADJEN register field value. */ +#define ALT_CLKMGR_PERPLL_MISC_BWADJEN_SET_MSK 0x00000001 +/* The mask used to clear the ALT_CLKMGR_PERPLL_MISC_BWADJEN register field value. */ +#define ALT_CLKMGR_PERPLL_MISC_BWADJEN_CLR_MSK 0xfffffffe +/* The reset value of the ALT_CLKMGR_PERPLL_MISC_BWADJEN register field. */ +#define ALT_CLKMGR_PERPLL_MISC_BWADJEN_RESET 0x0 +/* Extracts the ALT_CLKMGR_PERPLL_MISC_BWADJEN field value from a register. */ +#define ALT_CLKMGR_PERPLL_MISC_BWADJEN_GET(value) (((value) & 0x00000001) >> 0) +/* Produces a ALT_CLKMGR_PERPLL_MISC_BWADJEN register field value suitable for setting the register. */ +#define ALT_CLKMGR_PERPLL_MISC_BWADJEN_SET(value) (((value) << 0) & 0x00000001) + +/* + * Field : Loop Bandwidth Adjust - bwadj + * + * Provides Loop Bandwidth Adjust value. + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_PERPLL_MISC_BWADJ register field. */ +#define ALT_CLKMGR_PERPLL_MISC_BWADJ_LSB 1 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_PERPLL_MISC_BWADJ register field. */ +#define ALT_CLKMGR_PERPLL_MISC_BWADJ_MSB 12 +/* The width in bits of the ALT_CLKMGR_PERPLL_MISC_BWADJ register field. */ +#define ALT_CLKMGR_PERPLL_MISC_BWADJ_WIDTH 12 +/* The mask used to set the ALT_CLKMGR_PERPLL_MISC_BWADJ register field value. */ +#define ALT_CLKMGR_PERPLL_MISC_BWADJ_SET_MSK 0x00001ffe +/* The mask used to clear the ALT_CLKMGR_PERPLL_MISC_BWADJ register field value. */ +#define ALT_CLKMGR_PERPLL_MISC_BWADJ_CLR_MSK 0xffffe001 +/* The reset value of the ALT_CLKMGR_PERPLL_MISC_BWADJ register field. */ +#define ALT_CLKMGR_PERPLL_MISC_BWADJ_RESET 0x1 +/* Extracts the ALT_CLKMGR_PERPLL_MISC_BWADJ field value from a register. */ +#define ALT_CLKMGR_PERPLL_MISC_BWADJ_GET(value) (((value) & 0x00001ffe) >> 1) +/* Produces a ALT_CLKMGR_PERPLL_MISC_BWADJ register field value suitable for setting the register. */ +#define ALT_CLKMGR_PERPLL_MISC_BWADJ_SET(value) (((value) << 1) & 0x00001ffe) + +/* + * Field : Fast Locking Enable - fasten + * + * Enables fast locking circuit. + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_PERPLL_MISC_FASTEN register field. */ +#define ALT_CLKMGR_PERPLL_MISC_FASTEN_LSB 13 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_PERPLL_MISC_FASTEN register field. */ +#define ALT_CLKMGR_PERPLL_MISC_FASTEN_MSB 13 +/* The width in bits of the ALT_CLKMGR_PERPLL_MISC_FASTEN register field. */ +#define ALT_CLKMGR_PERPLL_MISC_FASTEN_WIDTH 1 +/* The mask used to set the ALT_CLKMGR_PERPLL_MISC_FASTEN register field value. */ +#define ALT_CLKMGR_PERPLL_MISC_FASTEN_SET_MSK 0x00002000 +/* The mask used to clear the ALT_CLKMGR_PERPLL_MISC_FASTEN register field value. */ +#define ALT_CLKMGR_PERPLL_MISC_FASTEN_CLR_MSK 0xffffdfff +/* The reset value of the ALT_CLKMGR_PERPLL_MISC_FASTEN register field. */ +#define ALT_CLKMGR_PERPLL_MISC_FASTEN_RESET 0x0 +/* Extracts the ALT_CLKMGR_PERPLL_MISC_FASTEN field value from a register. */ +#define ALT_CLKMGR_PERPLL_MISC_FASTEN_GET(value) (((value) & 0x00002000) >> 13) +/* Produces a ALT_CLKMGR_PERPLL_MISC_FASTEN register field value suitable for setting the register. */ +#define ALT_CLKMGR_PERPLL_MISC_FASTEN_SET(value) (((value) << 13) & 0x00002000) + +/* + * Field : Saturation Enable - saten + * + * Enables saturation behavior. + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_PERPLL_MISC_SATEN register field. */ +#define ALT_CLKMGR_PERPLL_MISC_SATEN_LSB 14 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_PERPLL_MISC_SATEN register field. */ +#define ALT_CLKMGR_PERPLL_MISC_SATEN_MSB 14 +/* The width in bits of the ALT_CLKMGR_PERPLL_MISC_SATEN register field. */ +#define ALT_CLKMGR_PERPLL_MISC_SATEN_WIDTH 1 +/* The mask used to set the ALT_CLKMGR_PERPLL_MISC_SATEN register field value. */ +#define ALT_CLKMGR_PERPLL_MISC_SATEN_SET_MSK 0x00004000 +/* The mask used to clear the ALT_CLKMGR_PERPLL_MISC_SATEN register field value. */ +#define ALT_CLKMGR_PERPLL_MISC_SATEN_CLR_MSK 0xffffbfff +/* The reset value of the ALT_CLKMGR_PERPLL_MISC_SATEN register field. */ +#define ALT_CLKMGR_PERPLL_MISC_SATEN_RESET 0x1 +/* Extracts the ALT_CLKMGR_PERPLL_MISC_SATEN field value from a register. */ +#define ALT_CLKMGR_PERPLL_MISC_SATEN_GET(value) (((value) & 0x00004000) >> 14) +/* Produces a ALT_CLKMGR_PERPLL_MISC_SATEN register field value suitable for setting the register. */ +#define ALT_CLKMGR_PERPLL_MISC_SATEN_SET(value) (((value) << 14) & 0x00004000) + +#ifndef __ASSEMBLY__ +/* + * WARNING: The C register and register group struct declarations are provided for + * convenience and illustrative purposes. They should, however, be used with + * caution as the C language standard provides no guarantees about the alignment or + * atomicity of device memory accesses. The recommended practice for writing + * hardware drivers is to use the SoCAL access macros and alt_read_word() and + * alt_write_word() functions. + * + * The struct declaration for register ALT_CLKMGR_PERPLL_MISC. + */ +struct ALT_CLKMGR_PERPLL_MISC_s +{ + uint32_t bwadjen : 1; /* Loop Bandwidth Adjust Enabled */ + uint32_t bwadj : 12; /* Loop Bandwidth Adjust */ + uint32_t fasten : 1; /* Fast Locking Enable */ + uint32_t saten : 1; /* Saturation Enable */ + uint32_t : 17; /* *UNDEFINED* */ +}; + +/* The typedef declaration for register ALT_CLKMGR_PERPLL_MISC. */ +typedef volatile struct ALT_CLKMGR_PERPLL_MISC_s ALT_CLKMGR_PERPLL_MISC_t; +#endif /* __ASSEMBLY__ */ + +/* The byte offset of the ALT_CLKMGR_PERPLL_MISC register from the beginning of the component. */ +#define ALT_CLKMGR_PERPLL_MISC_OFST 0x4 + +/* + * Register : Peripheral PLL C0 Control Register for Clock emac0_clk - emac0clk + * + * Contains settings that control clock emac0_clk generated from the C0 output of + * the Peripheral PLL. + * + * Only reset by a cold reset. + * + * Register Layout + * + * Bits | Access | Reset | Description + * :-------|:-------|:------|:------------ + * [8:0] | RW | 0x1 | Counter + * [31:9] | ??? | 0x0 | *UNDEFINED* + * + */ +/* + * Field : Counter - cnt + * + * Divides the VCO frequency by the value+1 in this field. + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_PERPLL_EMAC0CLK_CNT register field. */ +#define ALT_CLKMGR_PERPLL_EMAC0CLK_CNT_LSB 0 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_PERPLL_EMAC0CLK_CNT register field. */ +#define ALT_CLKMGR_PERPLL_EMAC0CLK_CNT_MSB 8 +/* The width in bits of the ALT_CLKMGR_PERPLL_EMAC0CLK_CNT register field. */ +#define ALT_CLKMGR_PERPLL_EMAC0CLK_CNT_WIDTH 9 +/* The mask used to set the ALT_CLKMGR_PERPLL_EMAC0CLK_CNT register field value. */ +#define ALT_CLKMGR_PERPLL_EMAC0CLK_CNT_SET_MSK 0x000001ff +/* The mask used to clear the ALT_CLKMGR_PERPLL_EMAC0CLK_CNT register field value. */ +#define ALT_CLKMGR_PERPLL_EMAC0CLK_CNT_CLR_MSK 0xfffffe00 +/* The reset value of the ALT_CLKMGR_PERPLL_EMAC0CLK_CNT register field. */ +#define ALT_CLKMGR_PERPLL_EMAC0CLK_CNT_RESET 0x1 +/* Extracts the ALT_CLKMGR_PERPLL_EMAC0CLK_CNT field value from a register. */ +#define ALT_CLKMGR_PERPLL_EMAC0CLK_CNT_GET(value) (((value) & 0x000001ff) >> 0) +/* Produces a ALT_CLKMGR_PERPLL_EMAC0CLK_CNT register field value suitable for setting the register. */ +#define ALT_CLKMGR_PERPLL_EMAC0CLK_CNT_SET(value) (((value) << 0) & 0x000001ff) + +#ifndef __ASSEMBLY__ +/* + * WARNING: The C register and register group struct declarations are provided for + * convenience and illustrative purposes. They should, however, be used with + * caution as the C language standard provides no guarantees about the alignment or + * atomicity of device memory accesses. The recommended practice for writing + * hardware drivers is to use the SoCAL access macros and alt_read_word() and + * alt_write_word() functions. + * + * The struct declaration for register ALT_CLKMGR_PERPLL_EMAC0CLK. + */ +struct ALT_CLKMGR_PERPLL_EMAC0CLK_s +{ + uint32_t cnt : 9; /* Counter */ + uint32_t : 23; /* *UNDEFINED* */ +}; + +/* The typedef declaration for register ALT_CLKMGR_PERPLL_EMAC0CLK. */ +typedef volatile struct ALT_CLKMGR_PERPLL_EMAC0CLK_s ALT_CLKMGR_PERPLL_EMAC0CLK_t; +#endif /* __ASSEMBLY__ */ + +/* The byte offset of the ALT_CLKMGR_PERPLL_EMAC0CLK register from the beginning of the component. */ +#define ALT_CLKMGR_PERPLL_EMAC0CLK_OFST 0x8 + +/* + * Register : Peripheral PLL C1 Control Register for Clock emac1_clk - emac1clk + * + * Contains settings that control clock emac1_clk generated from the C1 output of + * the Peripheral PLL. + * + * Only reset by a cold reset. + * + * Register Layout + * + * Bits | Access | Reset | Description + * :-------|:-------|:------|:------------ + * [8:0] | RW | 0x1 | Counter + * [31:9] | ??? | 0x0 | *UNDEFINED* + * + */ +/* + * Field : Counter - cnt + * + * Divides the VCO frequency by the value+1 in this field. + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_PERPLL_EMAC1CLK_CNT register field. */ +#define ALT_CLKMGR_PERPLL_EMAC1CLK_CNT_LSB 0 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_PERPLL_EMAC1CLK_CNT register field. */ +#define ALT_CLKMGR_PERPLL_EMAC1CLK_CNT_MSB 8 +/* The width in bits of the ALT_CLKMGR_PERPLL_EMAC1CLK_CNT register field. */ +#define ALT_CLKMGR_PERPLL_EMAC1CLK_CNT_WIDTH 9 +/* The mask used to set the ALT_CLKMGR_PERPLL_EMAC1CLK_CNT register field value. */ +#define ALT_CLKMGR_PERPLL_EMAC1CLK_CNT_SET_MSK 0x000001ff +/* The mask used to clear the ALT_CLKMGR_PERPLL_EMAC1CLK_CNT register field value. */ +#define ALT_CLKMGR_PERPLL_EMAC1CLK_CNT_CLR_MSK 0xfffffe00 +/* The reset value of the ALT_CLKMGR_PERPLL_EMAC1CLK_CNT register field. */ +#define ALT_CLKMGR_PERPLL_EMAC1CLK_CNT_RESET 0x1 +/* Extracts the ALT_CLKMGR_PERPLL_EMAC1CLK_CNT field value from a register. */ +#define ALT_CLKMGR_PERPLL_EMAC1CLK_CNT_GET(value) (((value) & 0x000001ff) >> 0) +/* Produces a ALT_CLKMGR_PERPLL_EMAC1CLK_CNT register field value suitable for setting the register. */ +#define ALT_CLKMGR_PERPLL_EMAC1CLK_CNT_SET(value) (((value) << 0) & 0x000001ff) + +#ifndef __ASSEMBLY__ +/* + * WARNING: The C register and register group struct declarations are provided for + * convenience and illustrative purposes. They should, however, be used with + * caution as the C language standard provides no guarantees about the alignment or + * atomicity of device memory accesses. The recommended practice for writing + * hardware drivers is to use the SoCAL access macros and alt_read_word() and + * alt_write_word() functions. + * + * The struct declaration for register ALT_CLKMGR_PERPLL_EMAC1CLK. + */ +struct ALT_CLKMGR_PERPLL_EMAC1CLK_s +{ + uint32_t cnt : 9; /* Counter */ + uint32_t : 23; /* *UNDEFINED* */ +}; + +/* The typedef declaration for register ALT_CLKMGR_PERPLL_EMAC1CLK. */ +typedef volatile struct ALT_CLKMGR_PERPLL_EMAC1CLK_s ALT_CLKMGR_PERPLL_EMAC1CLK_t; +#endif /* __ASSEMBLY__ */ + +/* The byte offset of the ALT_CLKMGR_PERPLL_EMAC1CLK register from the beginning of the component. */ +#define ALT_CLKMGR_PERPLL_EMAC1CLK_OFST 0xc + +/* + * Register : Peripheral PLL C2 Control Register for Clock periph_qspi_clk - perqspiclk + * + * Contains settings that control clock periph_qspi_clk generated from the C2 + * output of the Peripheral PLL. + * + * Only reset by a cold reset. + * + * Register Layout + * + * Bits | Access | Reset | Description + * :-------|:-------|:------|:------------ + * [8:0] | RW | 0x1 | Counter + * [31:9] | ??? | 0x0 | *UNDEFINED* + * + */ +/* + * Field : Counter - cnt + * + * Divides the VCO frequency by the value+1 in this field. + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_PERPLL_PERQSPICLK_CNT register field. */ +#define ALT_CLKMGR_PERPLL_PERQSPICLK_CNT_LSB 0 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_PERPLL_PERQSPICLK_CNT register field. */ +#define ALT_CLKMGR_PERPLL_PERQSPICLK_CNT_MSB 8 +/* The width in bits of the ALT_CLKMGR_PERPLL_PERQSPICLK_CNT register field. */ +#define ALT_CLKMGR_PERPLL_PERQSPICLK_CNT_WIDTH 9 +/* The mask used to set the ALT_CLKMGR_PERPLL_PERQSPICLK_CNT register field value. */ +#define ALT_CLKMGR_PERPLL_PERQSPICLK_CNT_SET_MSK 0x000001ff +/* The mask used to clear the ALT_CLKMGR_PERPLL_PERQSPICLK_CNT register field value. */ +#define ALT_CLKMGR_PERPLL_PERQSPICLK_CNT_CLR_MSK 0xfffffe00 +/* The reset value of the ALT_CLKMGR_PERPLL_PERQSPICLK_CNT register field. */ +#define ALT_CLKMGR_PERPLL_PERQSPICLK_CNT_RESET 0x1 +/* Extracts the ALT_CLKMGR_PERPLL_PERQSPICLK_CNT field value from a register. */ +#define ALT_CLKMGR_PERPLL_PERQSPICLK_CNT_GET(value) (((value) & 0x000001ff) >> 0) +/* Produces a ALT_CLKMGR_PERPLL_PERQSPICLK_CNT register field value suitable for setting the register. */ +#define ALT_CLKMGR_PERPLL_PERQSPICLK_CNT_SET(value) (((value) << 0) & 0x000001ff) + +#ifndef __ASSEMBLY__ +/* + * WARNING: The C register and register group struct declarations are provided for + * convenience and illustrative purposes. They should, however, be used with + * caution as the C language standard provides no guarantees about the alignment or + * atomicity of device memory accesses. The recommended practice for writing + * hardware drivers is to use the SoCAL access macros and alt_read_word() and + * alt_write_word() functions. + * + * The struct declaration for register ALT_CLKMGR_PERPLL_PERQSPICLK. + */ +struct ALT_CLKMGR_PERPLL_PERQSPICLK_s +{ + uint32_t cnt : 9; /* Counter */ + uint32_t : 23; /* *UNDEFINED* */ +}; + +/* The typedef declaration for register ALT_CLKMGR_PERPLL_PERQSPICLK. */ +typedef volatile struct ALT_CLKMGR_PERPLL_PERQSPICLK_s ALT_CLKMGR_PERPLL_PERQSPICLK_t; +#endif /* __ASSEMBLY__ */ + +/* The byte offset of the ALT_CLKMGR_PERPLL_PERQSPICLK register from the beginning of the component. */ +#define ALT_CLKMGR_PERPLL_PERQSPICLK_OFST 0x10 + +/* + * Register : Peripheral PLL C3 Control Register for Clock periph_nand_sdmmc_clk - pernandsdmmcclk + * + * Contains settings that control clock periph_nand_sdmmc_clk generated from the C3 + * output of the Peripheral PLL. + * + * Only reset by a cold reset. + * + * Register Layout + * + * Bits | Access | Reset | Description + * :-------|:-------|:------|:------------ + * [8:0] | RW | 0x1 | Counter + * [31:9] | ??? | 0x0 | *UNDEFINED* + * + */ +/* + * Field : Counter - cnt + * + * Divides the VCO frequency by the value+1 in this field. + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_PERPLL_PERNANDSDMMCCLK_CNT register field. */ +#define ALT_CLKMGR_PERPLL_PERNANDSDMMCCLK_CNT_LSB 0 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_PERPLL_PERNANDSDMMCCLK_CNT register field. */ +#define ALT_CLKMGR_PERPLL_PERNANDSDMMCCLK_CNT_MSB 8 +/* The width in bits of the ALT_CLKMGR_PERPLL_PERNANDSDMMCCLK_CNT register field. */ +#define ALT_CLKMGR_PERPLL_PERNANDSDMMCCLK_CNT_WIDTH 9 +/* The mask used to set the ALT_CLKMGR_PERPLL_PERNANDSDMMCCLK_CNT register field value. */ +#define ALT_CLKMGR_PERPLL_PERNANDSDMMCCLK_CNT_SET_MSK 0x000001ff +/* The mask used to clear the ALT_CLKMGR_PERPLL_PERNANDSDMMCCLK_CNT register field value. */ +#define ALT_CLKMGR_PERPLL_PERNANDSDMMCCLK_CNT_CLR_MSK 0xfffffe00 +/* The reset value of the ALT_CLKMGR_PERPLL_PERNANDSDMMCCLK_CNT register field. */ +#define ALT_CLKMGR_PERPLL_PERNANDSDMMCCLK_CNT_RESET 0x1 +/* Extracts the ALT_CLKMGR_PERPLL_PERNANDSDMMCCLK_CNT field value from a register. */ +#define ALT_CLKMGR_PERPLL_PERNANDSDMMCCLK_CNT_GET(value) (((value) & 0x000001ff) >> 0) +/* Produces a ALT_CLKMGR_PERPLL_PERNANDSDMMCCLK_CNT register field value suitable for setting the register. */ +#define ALT_CLKMGR_PERPLL_PERNANDSDMMCCLK_CNT_SET(value) (((value) << 0) & 0x000001ff) + +#ifndef __ASSEMBLY__ +/* + * WARNING: The C register and register group struct declarations are provided for + * convenience and illustrative purposes. They should, however, be used with + * caution as the C language standard provides no guarantees about the alignment or + * atomicity of device memory accesses. The recommended practice for writing + * hardware drivers is to use the SoCAL access macros and alt_read_word() and + * alt_write_word() functions. + * + * The struct declaration for register ALT_CLKMGR_PERPLL_PERNANDSDMMCCLK. + */ +struct ALT_CLKMGR_PERPLL_PERNANDSDMMCCLK_s +{ + uint32_t cnt : 9; /* Counter */ + uint32_t : 23; /* *UNDEFINED* */ +}; + +/* The typedef declaration for register ALT_CLKMGR_PERPLL_PERNANDSDMMCCLK. */ +typedef volatile struct ALT_CLKMGR_PERPLL_PERNANDSDMMCCLK_s ALT_CLKMGR_PERPLL_PERNANDSDMMCCLK_t; +#endif /* __ASSEMBLY__ */ + +/* The byte offset of the ALT_CLKMGR_PERPLL_PERNANDSDMMCCLK register from the beginning of the component. */ +#define ALT_CLKMGR_PERPLL_PERNANDSDMMCCLK_OFST 0x14 + +/* + * Register : Peripheral PLL C4 Control Register for Clock periph_base_clk - perbaseclk + * + * Contains settings that control clock periph_base_clk generated from the C4 + * output of the Peripheral PLL. + * + * Only reset by a cold reset. + * + * Register Layout + * + * Bits | Access | Reset | Description + * :-------|:-------|:------|:------------ + * [8:0] | RW | 0x1 | Counter + * [31:9] | ??? | 0x0 | *UNDEFINED* + * + */ +/* + * Field : Counter - cnt + * + * Divides the VCO frequency by the value+1 in this field. + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_PERPLL_PERBASECLK_CNT register field. */ +#define ALT_CLKMGR_PERPLL_PERBASECLK_CNT_LSB 0 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_PERPLL_PERBASECLK_CNT register field. */ +#define ALT_CLKMGR_PERPLL_PERBASECLK_CNT_MSB 8 +/* The width in bits of the ALT_CLKMGR_PERPLL_PERBASECLK_CNT register field. */ +#define ALT_CLKMGR_PERPLL_PERBASECLK_CNT_WIDTH 9 +/* The mask used to set the ALT_CLKMGR_PERPLL_PERBASECLK_CNT register field value. */ +#define ALT_CLKMGR_PERPLL_PERBASECLK_CNT_SET_MSK 0x000001ff +/* The mask used to clear the ALT_CLKMGR_PERPLL_PERBASECLK_CNT register field value. */ +#define ALT_CLKMGR_PERPLL_PERBASECLK_CNT_CLR_MSK 0xfffffe00 +/* The reset value of the ALT_CLKMGR_PERPLL_PERBASECLK_CNT register field. */ +#define ALT_CLKMGR_PERPLL_PERBASECLK_CNT_RESET 0x1 +/* Extracts the ALT_CLKMGR_PERPLL_PERBASECLK_CNT field value from a register. */ +#define ALT_CLKMGR_PERPLL_PERBASECLK_CNT_GET(value) (((value) & 0x000001ff) >> 0) +/* Produces a ALT_CLKMGR_PERPLL_PERBASECLK_CNT register field value suitable for setting the register. */ +#define ALT_CLKMGR_PERPLL_PERBASECLK_CNT_SET(value) (((value) << 0) & 0x000001ff) + +#ifndef __ASSEMBLY__ +/* + * WARNING: The C register and register group struct declarations are provided for + * convenience and illustrative purposes. They should, however, be used with + * caution as the C language standard provides no guarantees about the alignment or + * atomicity of device memory accesses. The recommended practice for writing + * hardware drivers is to use the SoCAL access macros and alt_read_word() and + * alt_write_word() functions. + * + * The struct declaration for register ALT_CLKMGR_PERPLL_PERBASECLK. + */ +struct ALT_CLKMGR_PERPLL_PERBASECLK_s +{ + uint32_t cnt : 9; /* Counter */ + uint32_t : 23; /* *UNDEFINED* */ +}; + +/* The typedef declaration for register ALT_CLKMGR_PERPLL_PERBASECLK. */ +typedef volatile struct ALT_CLKMGR_PERPLL_PERBASECLK_s ALT_CLKMGR_PERPLL_PERBASECLK_t; +#endif /* __ASSEMBLY__ */ + +/* The byte offset of the ALT_CLKMGR_PERPLL_PERBASECLK register from the beginning of the component. */ +#define ALT_CLKMGR_PERPLL_PERBASECLK_OFST 0x18 + +/* + * Register : Peripheral PLL C5 Control Register for Clock s2f_user1_clk - s2fuser1clk + * + * Contains settings that control clock s2f_user1_clk generated from the C5 output + * of the Peripheral PLL. + * + * Qsys and user documenation refer to s2f_user1_clk as h2f_user1_clk. + * + * Only reset by a cold reset. + * + * Register Layout + * + * Bits | Access | Reset | Description + * :-------|:-------|:------|:------------ + * [8:0] | RW | 0x1 | Counter + * [31:9] | ??? | 0x0 | *UNDEFINED* + * + */ +/* + * Field : Counter - cnt + * + * Divides the VCO frequency by the value+1 in this field. + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_PERPLL_S2FUSER1CLK_CNT register field. */ +#define ALT_CLKMGR_PERPLL_S2FUSER1CLK_CNT_LSB 0 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_PERPLL_S2FUSER1CLK_CNT register field. */ +#define ALT_CLKMGR_PERPLL_S2FUSER1CLK_CNT_MSB 8 +/* The width in bits of the ALT_CLKMGR_PERPLL_S2FUSER1CLK_CNT register field. */ +#define ALT_CLKMGR_PERPLL_S2FUSER1CLK_CNT_WIDTH 9 +/* The mask used to set the ALT_CLKMGR_PERPLL_S2FUSER1CLK_CNT register field value. */ +#define ALT_CLKMGR_PERPLL_S2FUSER1CLK_CNT_SET_MSK 0x000001ff +/* The mask used to clear the ALT_CLKMGR_PERPLL_S2FUSER1CLK_CNT register field value. */ +#define ALT_CLKMGR_PERPLL_S2FUSER1CLK_CNT_CLR_MSK 0xfffffe00 +/* The reset value of the ALT_CLKMGR_PERPLL_S2FUSER1CLK_CNT register field. */ +#define ALT_CLKMGR_PERPLL_S2FUSER1CLK_CNT_RESET 0x1 +/* Extracts the ALT_CLKMGR_PERPLL_S2FUSER1CLK_CNT field value from a register. */ +#define ALT_CLKMGR_PERPLL_S2FUSER1CLK_CNT_GET(value) (((value) & 0x000001ff) >> 0) +/* Produces a ALT_CLKMGR_PERPLL_S2FUSER1CLK_CNT register field value suitable for setting the register. */ +#define ALT_CLKMGR_PERPLL_S2FUSER1CLK_CNT_SET(value) (((value) << 0) & 0x000001ff) + +#ifndef __ASSEMBLY__ +/* + * WARNING: The C register and register group struct declarations are provided for + * convenience and illustrative purposes. They should, however, be used with + * caution as the C language standard provides no guarantees about the alignment or + * atomicity of device memory accesses. The recommended practice for writing + * hardware drivers is to use the SoCAL access macros and alt_read_word() and + * alt_write_word() functions. + * + * The struct declaration for register ALT_CLKMGR_PERPLL_S2FUSER1CLK. + */ +struct ALT_CLKMGR_PERPLL_S2FUSER1CLK_s +{ + uint32_t cnt : 9; /* Counter */ + uint32_t : 23; /* *UNDEFINED* */ +}; + +/* The typedef declaration for register ALT_CLKMGR_PERPLL_S2FUSER1CLK. */ +typedef volatile struct ALT_CLKMGR_PERPLL_S2FUSER1CLK_s ALT_CLKMGR_PERPLL_S2FUSER1CLK_t; +#endif /* __ASSEMBLY__ */ + +/* The byte offset of the ALT_CLKMGR_PERPLL_S2FUSER1CLK register from the beginning of the component. */ +#define ALT_CLKMGR_PERPLL_S2FUSER1CLK_OFST 0x1c + +/* + * Register : Enable Register - en + * + * Contains fields that control clock enables for clocks derived from the + * Peripheral PLL + * + * 1: The clock is enabled. + * + * 0: The clock is disabled. + * + * Fields are only reset by a cold reset. + * + * Register Layout + * + * Bits | Access | Reset | Description + * :--------|:-------|:------|:--------------------- + * [0] | RW | 0x1 | emac0_clk Enable + * [1] | RW | 0x1 | emac1_clk Enable + * [2] | RW | 0x1 | usb_mp_clk Enable + * [3] | RW | 0x1 | spi_m_clk Enable + * [4] | RW | 0x1 | can0_clk Enable + * [5] | RW | 0x1 | can1_clk Enable + * [6] | RW | 0x1 | gpio_clk Enable + * [7] | RW | 0x1 | s2f_user1_clk Enable + * [8] | RW | 0x1 | sdmmc_clk Enable + * [9] | RW | 0x1 | nand_x_clk Enable + * [10] | RW | 0x1 | nand_clk Enable + * [11] | RW | 0x1 | qspi_clk Enable + * [31:12] | ??? | 0x0 | *UNDEFINED* + * + */ +/* + * Field : emac0_clk Enable - emac0clk + * + * Enables clock emac0_clk output + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_PERPLL_EN_EMAC0CLK register field. */ +#define ALT_CLKMGR_PERPLL_EN_EMAC0CLK_LSB 0 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_PERPLL_EN_EMAC0CLK register field. */ +#define ALT_CLKMGR_PERPLL_EN_EMAC0CLK_MSB 0 +/* The width in bits of the ALT_CLKMGR_PERPLL_EN_EMAC0CLK register field. */ +#define ALT_CLKMGR_PERPLL_EN_EMAC0CLK_WIDTH 1 +/* The mask used to set the ALT_CLKMGR_PERPLL_EN_EMAC0CLK register field value. */ +#define ALT_CLKMGR_PERPLL_EN_EMAC0CLK_SET_MSK 0x00000001 +/* The mask used to clear the ALT_CLKMGR_PERPLL_EN_EMAC0CLK register field value. */ +#define ALT_CLKMGR_PERPLL_EN_EMAC0CLK_CLR_MSK 0xfffffffe +/* The reset value of the ALT_CLKMGR_PERPLL_EN_EMAC0CLK register field. */ +#define ALT_CLKMGR_PERPLL_EN_EMAC0CLK_RESET 0x1 +/* Extracts the ALT_CLKMGR_PERPLL_EN_EMAC0CLK field value from a register. */ +#define ALT_CLKMGR_PERPLL_EN_EMAC0CLK_GET(value) (((value) & 0x00000001) >> 0) +/* Produces a ALT_CLKMGR_PERPLL_EN_EMAC0CLK register field value suitable for setting the register. */ +#define ALT_CLKMGR_PERPLL_EN_EMAC0CLK_SET(value) (((value) << 0) & 0x00000001) + +/* + * Field : emac1_clk Enable - emac1clk + * + * Enables clock emac1_clk output + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_PERPLL_EN_EMAC1CLK register field. */ +#define ALT_CLKMGR_PERPLL_EN_EMAC1CLK_LSB 1 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_PERPLL_EN_EMAC1CLK register field. */ +#define ALT_CLKMGR_PERPLL_EN_EMAC1CLK_MSB 1 +/* The width in bits of the ALT_CLKMGR_PERPLL_EN_EMAC1CLK register field. */ +#define ALT_CLKMGR_PERPLL_EN_EMAC1CLK_WIDTH 1 +/* The mask used to set the ALT_CLKMGR_PERPLL_EN_EMAC1CLK register field value. */ +#define ALT_CLKMGR_PERPLL_EN_EMAC1CLK_SET_MSK 0x00000002 +/* The mask used to clear the ALT_CLKMGR_PERPLL_EN_EMAC1CLK register field value. */ +#define ALT_CLKMGR_PERPLL_EN_EMAC1CLK_CLR_MSK 0xfffffffd +/* The reset value of the ALT_CLKMGR_PERPLL_EN_EMAC1CLK register field. */ +#define ALT_CLKMGR_PERPLL_EN_EMAC1CLK_RESET 0x1 +/* Extracts the ALT_CLKMGR_PERPLL_EN_EMAC1CLK field value from a register. */ +#define ALT_CLKMGR_PERPLL_EN_EMAC1CLK_GET(value) (((value) & 0x00000002) >> 1) +/* Produces a ALT_CLKMGR_PERPLL_EN_EMAC1CLK register field value suitable for setting the register. */ +#define ALT_CLKMGR_PERPLL_EN_EMAC1CLK_SET(value) (((value) << 1) & 0x00000002) + +/* + * Field : usb_mp_clk Enable - usbclk + * + * Enables clock usb_mp_clk output + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_PERPLL_EN_USBCLK register field. */ +#define ALT_CLKMGR_PERPLL_EN_USBCLK_LSB 2 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_PERPLL_EN_USBCLK register field. */ +#define ALT_CLKMGR_PERPLL_EN_USBCLK_MSB 2 +/* The width in bits of the ALT_CLKMGR_PERPLL_EN_USBCLK register field. */ +#define ALT_CLKMGR_PERPLL_EN_USBCLK_WIDTH 1 +/* The mask used to set the ALT_CLKMGR_PERPLL_EN_USBCLK register field value. */ +#define ALT_CLKMGR_PERPLL_EN_USBCLK_SET_MSK 0x00000004 +/* The mask used to clear the ALT_CLKMGR_PERPLL_EN_USBCLK register field value. */ +#define ALT_CLKMGR_PERPLL_EN_USBCLK_CLR_MSK 0xfffffffb +/* The reset value of the ALT_CLKMGR_PERPLL_EN_USBCLK register field. */ +#define ALT_CLKMGR_PERPLL_EN_USBCLK_RESET 0x1 +/* Extracts the ALT_CLKMGR_PERPLL_EN_USBCLK field value from a register. */ +#define ALT_CLKMGR_PERPLL_EN_USBCLK_GET(value) (((value) & 0x00000004) >> 2) +/* Produces a ALT_CLKMGR_PERPLL_EN_USBCLK register field value suitable for setting the register. */ +#define ALT_CLKMGR_PERPLL_EN_USBCLK_SET(value) (((value) << 2) & 0x00000004) + +/* + * Field : spi_m_clk Enable - spimclk + * + * Enables clock spi_m_clk output + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_PERPLL_EN_SPIMCLK register field. */ +#define ALT_CLKMGR_PERPLL_EN_SPIMCLK_LSB 3 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_PERPLL_EN_SPIMCLK register field. */ +#define ALT_CLKMGR_PERPLL_EN_SPIMCLK_MSB 3 +/* The width in bits of the ALT_CLKMGR_PERPLL_EN_SPIMCLK register field. */ +#define ALT_CLKMGR_PERPLL_EN_SPIMCLK_WIDTH 1 +/* The mask used to set the ALT_CLKMGR_PERPLL_EN_SPIMCLK register field value. */ +#define ALT_CLKMGR_PERPLL_EN_SPIMCLK_SET_MSK 0x00000008 +/* The mask used to clear the ALT_CLKMGR_PERPLL_EN_SPIMCLK register field value. */ +#define ALT_CLKMGR_PERPLL_EN_SPIMCLK_CLR_MSK 0xfffffff7 +/* The reset value of the ALT_CLKMGR_PERPLL_EN_SPIMCLK register field. */ +#define ALT_CLKMGR_PERPLL_EN_SPIMCLK_RESET 0x1 +/* Extracts the ALT_CLKMGR_PERPLL_EN_SPIMCLK field value from a register. */ +#define ALT_CLKMGR_PERPLL_EN_SPIMCLK_GET(value) (((value) & 0x00000008) >> 3) +/* Produces a ALT_CLKMGR_PERPLL_EN_SPIMCLK register field value suitable for setting the register. */ +#define ALT_CLKMGR_PERPLL_EN_SPIMCLK_SET(value) (((value) << 3) & 0x00000008) + +/* + * Field : can0_clk Enable - can0clk + * + * Enables clock can0_clk output + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_PERPLL_EN_CAN0CLK register field. */ +#define ALT_CLKMGR_PERPLL_EN_CAN0CLK_LSB 4 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_PERPLL_EN_CAN0CLK register field. */ +#define ALT_CLKMGR_PERPLL_EN_CAN0CLK_MSB 4 +/* The width in bits of the ALT_CLKMGR_PERPLL_EN_CAN0CLK register field. */ +#define ALT_CLKMGR_PERPLL_EN_CAN0CLK_WIDTH 1 +/* The mask used to set the ALT_CLKMGR_PERPLL_EN_CAN0CLK register field value. */ +#define ALT_CLKMGR_PERPLL_EN_CAN0CLK_SET_MSK 0x00000010 +/* The mask used to clear the ALT_CLKMGR_PERPLL_EN_CAN0CLK register field value. */ +#define ALT_CLKMGR_PERPLL_EN_CAN0CLK_CLR_MSK 0xffffffef +/* The reset value of the ALT_CLKMGR_PERPLL_EN_CAN0CLK register field. */ +#define ALT_CLKMGR_PERPLL_EN_CAN0CLK_RESET 0x1 +/* Extracts the ALT_CLKMGR_PERPLL_EN_CAN0CLK field value from a register. */ +#define ALT_CLKMGR_PERPLL_EN_CAN0CLK_GET(value) (((value) & 0x00000010) >> 4) +/* Produces a ALT_CLKMGR_PERPLL_EN_CAN0CLK register field value suitable for setting the register. */ +#define ALT_CLKMGR_PERPLL_EN_CAN0CLK_SET(value) (((value) << 4) & 0x00000010) + +/* + * Field : can1_clk Enable - can1clk + * + * Enables clock can1_clk output + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_PERPLL_EN_CAN1CLK register field. */ +#define ALT_CLKMGR_PERPLL_EN_CAN1CLK_LSB 5 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_PERPLL_EN_CAN1CLK register field. */ +#define ALT_CLKMGR_PERPLL_EN_CAN1CLK_MSB 5 +/* The width in bits of the ALT_CLKMGR_PERPLL_EN_CAN1CLK register field. */ +#define ALT_CLKMGR_PERPLL_EN_CAN1CLK_WIDTH 1 +/* The mask used to set the ALT_CLKMGR_PERPLL_EN_CAN1CLK register field value. */ +#define ALT_CLKMGR_PERPLL_EN_CAN1CLK_SET_MSK 0x00000020 +/* The mask used to clear the ALT_CLKMGR_PERPLL_EN_CAN1CLK register field value. */ +#define ALT_CLKMGR_PERPLL_EN_CAN1CLK_CLR_MSK 0xffffffdf +/* The reset value of the ALT_CLKMGR_PERPLL_EN_CAN1CLK register field. */ +#define ALT_CLKMGR_PERPLL_EN_CAN1CLK_RESET 0x1 +/* Extracts the ALT_CLKMGR_PERPLL_EN_CAN1CLK field value from a register. */ +#define ALT_CLKMGR_PERPLL_EN_CAN1CLK_GET(value) (((value) & 0x00000020) >> 5) +/* Produces a ALT_CLKMGR_PERPLL_EN_CAN1CLK register field value suitable for setting the register. */ +#define ALT_CLKMGR_PERPLL_EN_CAN1CLK_SET(value) (((value) << 5) & 0x00000020) + +/* + * Field : gpio_clk Enable - gpioclk + * + * Enables clock gpio_clk output + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_PERPLL_EN_GPIOCLK register field. */ +#define ALT_CLKMGR_PERPLL_EN_GPIOCLK_LSB 6 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_PERPLL_EN_GPIOCLK register field. */ +#define ALT_CLKMGR_PERPLL_EN_GPIOCLK_MSB 6 +/* The width in bits of the ALT_CLKMGR_PERPLL_EN_GPIOCLK register field. */ +#define ALT_CLKMGR_PERPLL_EN_GPIOCLK_WIDTH 1 +/* The mask used to set the ALT_CLKMGR_PERPLL_EN_GPIOCLK register field value. */ +#define ALT_CLKMGR_PERPLL_EN_GPIOCLK_SET_MSK 0x00000040 +/* The mask used to clear the ALT_CLKMGR_PERPLL_EN_GPIOCLK register field value. */ +#define ALT_CLKMGR_PERPLL_EN_GPIOCLK_CLR_MSK 0xffffffbf +/* The reset value of the ALT_CLKMGR_PERPLL_EN_GPIOCLK register field. */ +#define ALT_CLKMGR_PERPLL_EN_GPIOCLK_RESET 0x1 +/* Extracts the ALT_CLKMGR_PERPLL_EN_GPIOCLK field value from a register. */ +#define ALT_CLKMGR_PERPLL_EN_GPIOCLK_GET(value) (((value) & 0x00000040) >> 6) +/* Produces a ALT_CLKMGR_PERPLL_EN_GPIOCLK register field value suitable for setting the register. */ +#define ALT_CLKMGR_PERPLL_EN_GPIOCLK_SET(value) (((value) << 6) & 0x00000040) + +/* + * Field : s2f_user1_clk Enable - s2fuser1clk + * + * Enables clock s2f_user1_clk output. + * + * Qsys and user documenation refer to s2f_user1_clk as h2f_user1_clk. + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_PERPLL_EN_S2FUSER1CLK register field. */ +#define ALT_CLKMGR_PERPLL_EN_S2FUSER1CLK_LSB 7 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_PERPLL_EN_S2FUSER1CLK register field. */ +#define ALT_CLKMGR_PERPLL_EN_S2FUSER1CLK_MSB 7 +/* The width in bits of the ALT_CLKMGR_PERPLL_EN_S2FUSER1CLK register field. */ +#define ALT_CLKMGR_PERPLL_EN_S2FUSER1CLK_WIDTH 1 +/* The mask used to set the ALT_CLKMGR_PERPLL_EN_S2FUSER1CLK register field value. */ +#define ALT_CLKMGR_PERPLL_EN_S2FUSER1CLK_SET_MSK 0x00000080 +/* The mask used to clear the ALT_CLKMGR_PERPLL_EN_S2FUSER1CLK register field value. */ +#define ALT_CLKMGR_PERPLL_EN_S2FUSER1CLK_CLR_MSK 0xffffff7f +/* The reset value of the ALT_CLKMGR_PERPLL_EN_S2FUSER1CLK register field. */ +#define ALT_CLKMGR_PERPLL_EN_S2FUSER1CLK_RESET 0x1 +/* Extracts the ALT_CLKMGR_PERPLL_EN_S2FUSER1CLK field value from a register. */ +#define ALT_CLKMGR_PERPLL_EN_S2FUSER1CLK_GET(value) (((value) & 0x00000080) >> 7) +/* Produces a ALT_CLKMGR_PERPLL_EN_S2FUSER1CLK register field value suitable for setting the register. */ +#define ALT_CLKMGR_PERPLL_EN_S2FUSER1CLK_SET(value) (((value) << 7) & 0x00000080) + +/* + * Field : sdmmc_clk Enable - sdmmcclk + * + * Enables clock sdmmc_clk output + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_PERPLL_EN_SDMMCCLK register field. */ +#define ALT_CLKMGR_PERPLL_EN_SDMMCCLK_LSB 8 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_PERPLL_EN_SDMMCCLK register field. */ +#define ALT_CLKMGR_PERPLL_EN_SDMMCCLK_MSB 8 +/* The width in bits of the ALT_CLKMGR_PERPLL_EN_SDMMCCLK register field. */ +#define ALT_CLKMGR_PERPLL_EN_SDMMCCLK_WIDTH 1 +/* The mask used to set the ALT_CLKMGR_PERPLL_EN_SDMMCCLK register field value. */ +#define ALT_CLKMGR_PERPLL_EN_SDMMCCLK_SET_MSK 0x00000100 +/* The mask used to clear the ALT_CLKMGR_PERPLL_EN_SDMMCCLK register field value. */ +#define ALT_CLKMGR_PERPLL_EN_SDMMCCLK_CLR_MSK 0xfffffeff +/* The reset value of the ALT_CLKMGR_PERPLL_EN_SDMMCCLK register field. */ +#define ALT_CLKMGR_PERPLL_EN_SDMMCCLK_RESET 0x1 +/* Extracts the ALT_CLKMGR_PERPLL_EN_SDMMCCLK field value from a register. */ +#define ALT_CLKMGR_PERPLL_EN_SDMMCCLK_GET(value) (((value) & 0x00000100) >> 8) +/* Produces a ALT_CLKMGR_PERPLL_EN_SDMMCCLK register field value suitable for setting the register. */ +#define ALT_CLKMGR_PERPLL_EN_SDMMCCLK_SET(value) (((value) << 8) & 0x00000100) + +/* + * Field : nand_x_clk Enable - nandxclk + * + * Enables clock nand_x_clk output + * + * nand_clk Enable should always be de-asserted before the nand_x_clk Enable, and + * the nand_x_clk Enable should always be asserted before the nand_clk Enable is + * asserted. A brief delay is also required between switching the enables (8 * + * nand_clk period). + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_PERPLL_EN_NANDXCLK register field. */ +#define ALT_CLKMGR_PERPLL_EN_NANDXCLK_LSB 9 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_PERPLL_EN_NANDXCLK register field. */ +#define ALT_CLKMGR_PERPLL_EN_NANDXCLK_MSB 9 +/* The width in bits of the ALT_CLKMGR_PERPLL_EN_NANDXCLK register field. */ +#define ALT_CLKMGR_PERPLL_EN_NANDXCLK_WIDTH 1 +/* The mask used to set the ALT_CLKMGR_PERPLL_EN_NANDXCLK register field value. */ +#define ALT_CLKMGR_PERPLL_EN_NANDXCLK_SET_MSK 0x00000200 +/* The mask used to clear the ALT_CLKMGR_PERPLL_EN_NANDXCLK register field value. */ +#define ALT_CLKMGR_PERPLL_EN_NANDXCLK_CLR_MSK 0xfffffdff +/* The reset value of the ALT_CLKMGR_PERPLL_EN_NANDXCLK register field. */ +#define ALT_CLKMGR_PERPLL_EN_NANDXCLK_RESET 0x1 +/* Extracts the ALT_CLKMGR_PERPLL_EN_NANDXCLK field value from a register. */ +#define ALT_CLKMGR_PERPLL_EN_NANDXCLK_GET(value) (((value) & 0x00000200) >> 9) +/* Produces a ALT_CLKMGR_PERPLL_EN_NANDXCLK register field value suitable for setting the register. */ +#define ALT_CLKMGR_PERPLL_EN_NANDXCLK_SET(value) (((value) << 9) & 0x00000200) + +/* + * Field : nand_clk Enable - nandclk + * + * Enables clock nand_clk output + * + * nand_clk Enable should always be de-asserted before the nand_x_clk Enable, and + * the nand_x_clk Enable should always be asserted before the nand_clk Enable is + * asserted. A brief delay is also required between switching the enables (8 * + * nand_clk period). + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_PERPLL_EN_NANDCLK register field. */ +#define ALT_CLKMGR_PERPLL_EN_NANDCLK_LSB 10 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_PERPLL_EN_NANDCLK register field. */ +#define ALT_CLKMGR_PERPLL_EN_NANDCLK_MSB 10 +/* The width in bits of the ALT_CLKMGR_PERPLL_EN_NANDCLK register field. */ +#define ALT_CLKMGR_PERPLL_EN_NANDCLK_WIDTH 1 +/* The mask used to set the ALT_CLKMGR_PERPLL_EN_NANDCLK register field value. */ +#define ALT_CLKMGR_PERPLL_EN_NANDCLK_SET_MSK 0x00000400 +/* The mask used to clear the ALT_CLKMGR_PERPLL_EN_NANDCLK register field value. */ +#define ALT_CLKMGR_PERPLL_EN_NANDCLK_CLR_MSK 0xfffffbff +/* The reset value of the ALT_CLKMGR_PERPLL_EN_NANDCLK register field. */ +#define ALT_CLKMGR_PERPLL_EN_NANDCLK_RESET 0x1 +/* Extracts the ALT_CLKMGR_PERPLL_EN_NANDCLK field value from a register. */ +#define ALT_CLKMGR_PERPLL_EN_NANDCLK_GET(value) (((value) & 0x00000400) >> 10) +/* Produces a ALT_CLKMGR_PERPLL_EN_NANDCLK register field value suitable for setting the register. */ +#define ALT_CLKMGR_PERPLL_EN_NANDCLK_SET(value) (((value) << 10) & 0x00000400) + +/* + * Field : qspi_clk Enable - qspiclk + * + * Enables clock qspi_clk output + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_PERPLL_EN_QSPICLK register field. */ +#define ALT_CLKMGR_PERPLL_EN_QSPICLK_LSB 11 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_PERPLL_EN_QSPICLK register field. */ +#define ALT_CLKMGR_PERPLL_EN_QSPICLK_MSB 11 +/* The width in bits of the ALT_CLKMGR_PERPLL_EN_QSPICLK register field. */ +#define ALT_CLKMGR_PERPLL_EN_QSPICLK_WIDTH 1 +/* The mask used to set the ALT_CLKMGR_PERPLL_EN_QSPICLK register field value. */ +#define ALT_CLKMGR_PERPLL_EN_QSPICLK_SET_MSK 0x00000800 +/* The mask used to clear the ALT_CLKMGR_PERPLL_EN_QSPICLK register field value. */ +#define ALT_CLKMGR_PERPLL_EN_QSPICLK_CLR_MSK 0xfffff7ff +/* The reset value of the ALT_CLKMGR_PERPLL_EN_QSPICLK register field. */ +#define ALT_CLKMGR_PERPLL_EN_QSPICLK_RESET 0x1 +/* Extracts the ALT_CLKMGR_PERPLL_EN_QSPICLK field value from a register. */ +#define ALT_CLKMGR_PERPLL_EN_QSPICLK_GET(value) (((value) & 0x00000800) >> 11) +/* Produces a ALT_CLKMGR_PERPLL_EN_QSPICLK register field value suitable for setting the register. */ +#define ALT_CLKMGR_PERPLL_EN_QSPICLK_SET(value) (((value) << 11) & 0x00000800) + +#ifndef __ASSEMBLY__ +/* + * WARNING: The C register and register group struct declarations are provided for + * convenience and illustrative purposes. They should, however, be used with + * caution as the C language standard provides no guarantees about the alignment or + * atomicity of device memory accesses. The recommended practice for writing + * hardware drivers is to use the SoCAL access macros and alt_read_word() and + * alt_write_word() functions. + * + * The struct declaration for register ALT_CLKMGR_PERPLL_EN. + */ +struct ALT_CLKMGR_PERPLL_EN_s +{ + uint32_t emac0clk : 1; /* emac0_clk Enable */ + uint32_t emac1clk : 1; /* emac1_clk Enable */ + uint32_t usbclk : 1; /* usb_mp_clk Enable */ + uint32_t spimclk : 1; /* spi_m_clk Enable */ + uint32_t can0clk : 1; /* can0_clk Enable */ + uint32_t can1clk : 1; /* can1_clk Enable */ + uint32_t gpioclk : 1; /* gpio_clk Enable */ + uint32_t s2fuser1clk : 1; /* s2f_user1_clk Enable */ + uint32_t sdmmcclk : 1; /* sdmmc_clk Enable */ + uint32_t nandxclk : 1; /* nand_x_clk Enable */ + uint32_t nandclk : 1; /* nand_clk Enable */ + uint32_t qspiclk : 1; /* qspi_clk Enable */ + uint32_t : 20; /* *UNDEFINED* */ +}; + +/* The typedef declaration for register ALT_CLKMGR_PERPLL_EN. */ +typedef volatile struct ALT_CLKMGR_PERPLL_EN_s ALT_CLKMGR_PERPLL_EN_t; +#endif /* __ASSEMBLY__ */ + +/* The byte offset of the ALT_CLKMGR_PERPLL_EN register from the beginning of the component. */ +#define ALT_CLKMGR_PERPLL_EN_OFST 0x20 + +/* + * Register : Divide Register - div + * + * Contains fields that control clock dividers for clocks derived from the + * Peripheral PLL + * + * Fields are only reset by a cold reset. + * + * Register Layout + * + * Bits | Access | Reset | Description + * :--------|:-------|:------|:------------------------- + * [2:0] | RW | 0x0 | USB Clock Divider + * [5:3] | RW | 0x0 | SPI Master Clock Divider + * [8:6] | RW | 0x0 | CAN0 Clock Divider + * [11:9] | RW | 0x0 | CAN1 Clock Divider + * [31:12] | ??? | 0x0 | *UNDEFINED* + * + */ +/* + * Field : USB Clock Divider - usbclk + * + * The usb_mp_clk is divided down from the periph_base_clk by the value specified + * in this field. + * + * Field Enumeration Values: + * + * Enum | Value | Description + * :--------------------------------------|:------|:------------- + * ALT_CLKMGR_PERPLL_DIV_USBCLK_E_DIV1 | 0x0 | Divide By 1 + * ALT_CLKMGR_PERPLL_DIV_USBCLK_E_DIV2 | 0x1 | Divide By 2 + * ALT_CLKMGR_PERPLL_DIV_USBCLK_E_DIV4 | 0x2 | Divide By 4 + * ALT_CLKMGR_PERPLL_DIV_USBCLK_E_DIV8 | 0x3 | Divide By 8 + * ALT_CLKMGR_PERPLL_DIV_USBCLK_E_DIV16 | 0x4 | Divide By 16 + * ALT_CLKMGR_PERPLL_DIV_USBCLK_E_RSVD_1 | 0x5 | Reserved + * ALT_CLKMGR_PERPLL_DIV_USBCLK_E_RSVD_2 | 0x6 | Reserved + * ALT_CLKMGR_PERPLL_DIV_USBCLK_E_RSVD_3 | 0x7 | Reserved + * + * Field Access Macros: + * + */ +/* + * Enumerated value for register field ALT_CLKMGR_PERPLL_DIV_USBCLK + * + * Divide By 1 + */ +#define ALT_CLKMGR_PERPLL_DIV_USBCLK_E_DIV1 0x0 +/* + * Enumerated value for register field ALT_CLKMGR_PERPLL_DIV_USBCLK + * + * Divide By 2 + */ +#define ALT_CLKMGR_PERPLL_DIV_USBCLK_E_DIV2 0x1 +/* + * Enumerated value for register field ALT_CLKMGR_PERPLL_DIV_USBCLK + * + * Divide By 4 + */ +#define ALT_CLKMGR_PERPLL_DIV_USBCLK_E_DIV4 0x2 +/* + * Enumerated value for register field ALT_CLKMGR_PERPLL_DIV_USBCLK + * + * Divide By 8 + */ +#define ALT_CLKMGR_PERPLL_DIV_USBCLK_E_DIV8 0x3 +/* + * Enumerated value for register field ALT_CLKMGR_PERPLL_DIV_USBCLK + * + * Divide By 16 + */ +#define ALT_CLKMGR_PERPLL_DIV_USBCLK_E_DIV16 0x4 +/* + * Enumerated value for register field ALT_CLKMGR_PERPLL_DIV_USBCLK + * + * Reserved + */ +#define ALT_CLKMGR_PERPLL_DIV_USBCLK_E_RSVD_1 0x5 +/* + * Enumerated value for register field ALT_CLKMGR_PERPLL_DIV_USBCLK + * + * Reserved + */ +#define ALT_CLKMGR_PERPLL_DIV_USBCLK_E_RSVD_2 0x6 +/* + * Enumerated value for register field ALT_CLKMGR_PERPLL_DIV_USBCLK + * + * Reserved + */ +#define ALT_CLKMGR_PERPLL_DIV_USBCLK_E_RSVD_3 0x7 + +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_PERPLL_DIV_USBCLK register field. */ +#define ALT_CLKMGR_PERPLL_DIV_USBCLK_LSB 0 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_PERPLL_DIV_USBCLK register field. */ +#define ALT_CLKMGR_PERPLL_DIV_USBCLK_MSB 2 +/* The width in bits of the ALT_CLKMGR_PERPLL_DIV_USBCLK register field. */ +#define ALT_CLKMGR_PERPLL_DIV_USBCLK_WIDTH 3 +/* The mask used to set the ALT_CLKMGR_PERPLL_DIV_USBCLK register field value. */ +#define ALT_CLKMGR_PERPLL_DIV_USBCLK_SET_MSK 0x00000007 +/* The mask used to clear the ALT_CLKMGR_PERPLL_DIV_USBCLK register field value. */ +#define ALT_CLKMGR_PERPLL_DIV_USBCLK_CLR_MSK 0xfffffff8 +/* The reset value of the ALT_CLKMGR_PERPLL_DIV_USBCLK register field. */ +#define ALT_CLKMGR_PERPLL_DIV_USBCLK_RESET 0x0 +/* Extracts the ALT_CLKMGR_PERPLL_DIV_USBCLK field value from a register. */ +#define ALT_CLKMGR_PERPLL_DIV_USBCLK_GET(value) (((value) & 0x00000007) >> 0) +/* Produces a ALT_CLKMGR_PERPLL_DIV_USBCLK register field value suitable for setting the register. */ +#define ALT_CLKMGR_PERPLL_DIV_USBCLK_SET(value) (((value) << 0) & 0x00000007) + +/* + * Field : SPI Master Clock Divider - spimclk + * + * The spi_m_clk is divided down from the periph_base_clk by the value specified in + * this field. + * + * Field Enumeration Values: + * + * Enum | Value | Description + * :---------------------------------------|:------|:------------- + * ALT_CLKMGR_PERPLL_DIV_SPIMCLK_E_DIV1 | 0x0 | Divide By 1 + * ALT_CLKMGR_PERPLL_DIV_SPIMCLK_E_DIV2 | 0x1 | Divide By 2 + * ALT_CLKMGR_PERPLL_DIV_SPIMCLK_E_DIV4 | 0x2 | Divide By 4 + * ALT_CLKMGR_PERPLL_DIV_SPIMCLK_E_DIV8 | 0x3 | Divide By 8 + * ALT_CLKMGR_PERPLL_DIV_SPIMCLK_E_DIV16 | 0x4 | Divide By 16 + * ALT_CLKMGR_PERPLL_DIV_SPIMCLK_E_RSVD_1 | 0x5 | Reserved + * ALT_CLKMGR_PERPLL_DIV_SPIMCLK_E_RSVD_2 | 0x6 | Reserved + * ALT_CLKMGR_PERPLL_DIV_SPIMCLK_E_RSVD_3 | 0x7 | Reserved + * + * Field Access Macros: + * + */ +/* + * Enumerated value for register field ALT_CLKMGR_PERPLL_DIV_SPIMCLK + * + * Divide By 1 + */ +#define ALT_CLKMGR_PERPLL_DIV_SPIMCLK_E_DIV1 0x0 +/* + * Enumerated value for register field ALT_CLKMGR_PERPLL_DIV_SPIMCLK + * + * Divide By 2 + */ +#define ALT_CLKMGR_PERPLL_DIV_SPIMCLK_E_DIV2 0x1 +/* + * Enumerated value for register field ALT_CLKMGR_PERPLL_DIV_SPIMCLK + * + * Divide By 4 + */ +#define ALT_CLKMGR_PERPLL_DIV_SPIMCLK_E_DIV4 0x2 +/* + * Enumerated value for register field ALT_CLKMGR_PERPLL_DIV_SPIMCLK + * + * Divide By 8 + */ +#define ALT_CLKMGR_PERPLL_DIV_SPIMCLK_E_DIV8 0x3 +/* + * Enumerated value for register field ALT_CLKMGR_PERPLL_DIV_SPIMCLK + * + * Divide By 16 + */ +#define ALT_CLKMGR_PERPLL_DIV_SPIMCLK_E_DIV16 0x4 +/* + * Enumerated value for register field ALT_CLKMGR_PERPLL_DIV_SPIMCLK + * + * Reserved + */ +#define ALT_CLKMGR_PERPLL_DIV_SPIMCLK_E_RSVD_1 0x5 +/* + * Enumerated value for register field ALT_CLKMGR_PERPLL_DIV_SPIMCLK + * + * Reserved + */ +#define ALT_CLKMGR_PERPLL_DIV_SPIMCLK_E_RSVD_2 0x6 +/* + * Enumerated value for register field ALT_CLKMGR_PERPLL_DIV_SPIMCLK + * + * Reserved + */ +#define ALT_CLKMGR_PERPLL_DIV_SPIMCLK_E_RSVD_3 0x7 + +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_PERPLL_DIV_SPIMCLK register field. */ +#define ALT_CLKMGR_PERPLL_DIV_SPIMCLK_LSB 3 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_PERPLL_DIV_SPIMCLK register field. */ +#define ALT_CLKMGR_PERPLL_DIV_SPIMCLK_MSB 5 +/* The width in bits of the ALT_CLKMGR_PERPLL_DIV_SPIMCLK register field. */ +#define ALT_CLKMGR_PERPLL_DIV_SPIMCLK_WIDTH 3 +/* The mask used to set the ALT_CLKMGR_PERPLL_DIV_SPIMCLK register field value. */ +#define ALT_CLKMGR_PERPLL_DIV_SPIMCLK_SET_MSK 0x00000038 +/* The mask used to clear the ALT_CLKMGR_PERPLL_DIV_SPIMCLK register field value. */ +#define ALT_CLKMGR_PERPLL_DIV_SPIMCLK_CLR_MSK 0xffffffc7 +/* The reset value of the ALT_CLKMGR_PERPLL_DIV_SPIMCLK register field. */ +#define ALT_CLKMGR_PERPLL_DIV_SPIMCLK_RESET 0x0 +/* Extracts the ALT_CLKMGR_PERPLL_DIV_SPIMCLK field value from a register. */ +#define ALT_CLKMGR_PERPLL_DIV_SPIMCLK_GET(value) (((value) & 0x00000038) >> 3) +/* Produces a ALT_CLKMGR_PERPLL_DIV_SPIMCLK register field value suitable for setting the register. */ +#define ALT_CLKMGR_PERPLL_DIV_SPIMCLK_SET(value) (((value) << 3) & 0x00000038) + +/* + * Field : CAN0 Clock Divider - can0clk + * + * The can0_clk is divided down from the periph_base_clk by the value specified in + * this field. + * + * Field Enumeration Values: + * + * Enum | Value | Description + * :---------------------------------------|:------|:------------- + * ALT_CLKMGR_PERPLL_DIV_CAN0CLK_E_DIV1 | 0x0 | Divide By 1 + * ALT_CLKMGR_PERPLL_DIV_CAN0CLK_E_DIV2 | 0x1 | Divide By 2 + * ALT_CLKMGR_PERPLL_DIV_CAN0CLK_E_DIV4 | 0x2 | Divide By 4 + * ALT_CLKMGR_PERPLL_DIV_CAN0CLK_E_DIV8 | 0x3 | Divide By 8 + * ALT_CLKMGR_PERPLL_DIV_CAN0CLK_E_DIV16 | 0x4 | Divide By 16 + * ALT_CLKMGR_PERPLL_DIV_CAN0CLK_E_RSVD_1 | 0x5 | Reserved + * ALT_CLKMGR_PERPLL_DIV_CAN0CLK_E_RSVD_2 | 0x6 | Reserved + * ALT_CLKMGR_PERPLL_DIV_CAN0CLK_E_RSVD_3 | 0x7 | Reserved + * + * Field Access Macros: + * + */ +/* + * Enumerated value for register field ALT_CLKMGR_PERPLL_DIV_CAN0CLK + * + * Divide By 1 + */ +#define ALT_CLKMGR_PERPLL_DIV_CAN0CLK_E_DIV1 0x0 +/* + * Enumerated value for register field ALT_CLKMGR_PERPLL_DIV_CAN0CLK + * + * Divide By 2 + */ +#define ALT_CLKMGR_PERPLL_DIV_CAN0CLK_E_DIV2 0x1 +/* + * Enumerated value for register field ALT_CLKMGR_PERPLL_DIV_CAN0CLK + * + * Divide By 4 + */ +#define ALT_CLKMGR_PERPLL_DIV_CAN0CLK_E_DIV4 0x2 +/* + * Enumerated value for register field ALT_CLKMGR_PERPLL_DIV_CAN0CLK + * + * Divide By 8 + */ +#define ALT_CLKMGR_PERPLL_DIV_CAN0CLK_E_DIV8 0x3 +/* + * Enumerated value for register field ALT_CLKMGR_PERPLL_DIV_CAN0CLK + * + * Divide By 16 + */ +#define ALT_CLKMGR_PERPLL_DIV_CAN0CLK_E_DIV16 0x4 +/* + * Enumerated value for register field ALT_CLKMGR_PERPLL_DIV_CAN0CLK + * + * Reserved + */ +#define ALT_CLKMGR_PERPLL_DIV_CAN0CLK_E_RSVD_1 0x5 +/* + * Enumerated value for register field ALT_CLKMGR_PERPLL_DIV_CAN0CLK + * + * Reserved + */ +#define ALT_CLKMGR_PERPLL_DIV_CAN0CLK_E_RSVD_2 0x6 +/* + * Enumerated value for register field ALT_CLKMGR_PERPLL_DIV_CAN0CLK + * + * Reserved + */ +#define ALT_CLKMGR_PERPLL_DIV_CAN0CLK_E_RSVD_3 0x7 + +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_PERPLL_DIV_CAN0CLK register field. */ +#define ALT_CLKMGR_PERPLL_DIV_CAN0CLK_LSB 6 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_PERPLL_DIV_CAN0CLK register field. */ +#define ALT_CLKMGR_PERPLL_DIV_CAN0CLK_MSB 8 +/* The width in bits of the ALT_CLKMGR_PERPLL_DIV_CAN0CLK register field. */ +#define ALT_CLKMGR_PERPLL_DIV_CAN0CLK_WIDTH 3 +/* The mask used to set the ALT_CLKMGR_PERPLL_DIV_CAN0CLK register field value. */ +#define ALT_CLKMGR_PERPLL_DIV_CAN0CLK_SET_MSK 0x000001c0 +/* The mask used to clear the ALT_CLKMGR_PERPLL_DIV_CAN0CLK register field value. */ +#define ALT_CLKMGR_PERPLL_DIV_CAN0CLK_CLR_MSK 0xfffffe3f +/* The reset value of the ALT_CLKMGR_PERPLL_DIV_CAN0CLK register field. */ +#define ALT_CLKMGR_PERPLL_DIV_CAN0CLK_RESET 0x0 +/* Extracts the ALT_CLKMGR_PERPLL_DIV_CAN0CLK field value from a register. */ +#define ALT_CLKMGR_PERPLL_DIV_CAN0CLK_GET(value) (((value) & 0x000001c0) >> 6) +/* Produces a ALT_CLKMGR_PERPLL_DIV_CAN0CLK register field value suitable for setting the register. */ +#define ALT_CLKMGR_PERPLL_DIV_CAN0CLK_SET(value) (((value) << 6) & 0x000001c0) + +/* + * Field : CAN1 Clock Divider - can1clk + * + * The can1_clk is divided down from the periph_base_clk by the value specified in + * this field. + * + * Field Enumeration Values: + * + * Enum | Value | Description + * :---------------------------------------|:------|:------------- + * ALT_CLKMGR_PERPLL_DIV_CAN1CLK_E_DIV1 | 0x0 | Divide By 1 + * ALT_CLKMGR_PERPLL_DIV_CAN1CLK_E_DIV2 | 0x1 | Divide By 2 + * ALT_CLKMGR_PERPLL_DIV_CAN1CLK_E_DIV4 | 0x2 | Divide By 4 + * ALT_CLKMGR_PERPLL_DIV_CAN1CLK_E_DIV8 | 0x3 | Divide By 8 + * ALT_CLKMGR_PERPLL_DIV_CAN1CLK_E_DIV16 | 0x4 | Divide By 16 + * ALT_CLKMGR_PERPLL_DIV_CAN1CLK_E_RSVD_1 | 0x5 | Reserved + * ALT_CLKMGR_PERPLL_DIV_CAN1CLK_E_RSVD_2 | 0x6 | Reserved + * ALT_CLKMGR_PERPLL_DIV_CAN1CLK_E_RSVD_3 | 0x7 | Reserved + * + * Field Access Macros: + * + */ +/* + * Enumerated value for register field ALT_CLKMGR_PERPLL_DIV_CAN1CLK + * + * Divide By 1 + */ +#define ALT_CLKMGR_PERPLL_DIV_CAN1CLK_E_DIV1 0x0 +/* + * Enumerated value for register field ALT_CLKMGR_PERPLL_DIV_CAN1CLK + * + * Divide By 2 + */ +#define ALT_CLKMGR_PERPLL_DIV_CAN1CLK_E_DIV2 0x1 +/* + * Enumerated value for register field ALT_CLKMGR_PERPLL_DIV_CAN1CLK + * + * Divide By 4 + */ +#define ALT_CLKMGR_PERPLL_DIV_CAN1CLK_E_DIV4 0x2 +/* + * Enumerated value for register field ALT_CLKMGR_PERPLL_DIV_CAN1CLK + * + * Divide By 8 + */ +#define ALT_CLKMGR_PERPLL_DIV_CAN1CLK_E_DIV8 0x3 +/* + * Enumerated value for register field ALT_CLKMGR_PERPLL_DIV_CAN1CLK + * + * Divide By 16 + */ +#define ALT_CLKMGR_PERPLL_DIV_CAN1CLK_E_DIV16 0x4 +/* + * Enumerated value for register field ALT_CLKMGR_PERPLL_DIV_CAN1CLK + * + * Reserved + */ +#define ALT_CLKMGR_PERPLL_DIV_CAN1CLK_E_RSVD_1 0x5 +/* + * Enumerated value for register field ALT_CLKMGR_PERPLL_DIV_CAN1CLK + * + * Reserved + */ +#define ALT_CLKMGR_PERPLL_DIV_CAN1CLK_E_RSVD_2 0x6 +/* + * Enumerated value for register field ALT_CLKMGR_PERPLL_DIV_CAN1CLK + * + * Reserved + */ +#define ALT_CLKMGR_PERPLL_DIV_CAN1CLK_E_RSVD_3 0x7 + +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_PERPLL_DIV_CAN1CLK register field. */ +#define ALT_CLKMGR_PERPLL_DIV_CAN1CLK_LSB 9 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_PERPLL_DIV_CAN1CLK register field. */ +#define ALT_CLKMGR_PERPLL_DIV_CAN1CLK_MSB 11 +/* The width in bits of the ALT_CLKMGR_PERPLL_DIV_CAN1CLK register field. */ +#define ALT_CLKMGR_PERPLL_DIV_CAN1CLK_WIDTH 3 +/* The mask used to set the ALT_CLKMGR_PERPLL_DIV_CAN1CLK register field value. */ +#define ALT_CLKMGR_PERPLL_DIV_CAN1CLK_SET_MSK 0x00000e00 +/* The mask used to clear the ALT_CLKMGR_PERPLL_DIV_CAN1CLK register field value. */ +#define ALT_CLKMGR_PERPLL_DIV_CAN1CLK_CLR_MSK 0xfffff1ff +/* The reset value of the ALT_CLKMGR_PERPLL_DIV_CAN1CLK register field. */ +#define ALT_CLKMGR_PERPLL_DIV_CAN1CLK_RESET 0x0 +/* Extracts the ALT_CLKMGR_PERPLL_DIV_CAN1CLK field value from a register. */ +#define ALT_CLKMGR_PERPLL_DIV_CAN1CLK_GET(value) (((value) & 0x00000e00) >> 9) +/* Produces a ALT_CLKMGR_PERPLL_DIV_CAN1CLK register field value suitable for setting the register. */ +#define ALT_CLKMGR_PERPLL_DIV_CAN1CLK_SET(value) (((value) << 9) & 0x00000e00) + +#ifndef __ASSEMBLY__ +/* + * WARNING: The C register and register group struct declarations are provided for + * convenience and illustrative purposes. They should, however, be used with + * caution as the C language standard provides no guarantees about the alignment or + * atomicity of device memory accesses. The recommended practice for writing + * hardware drivers is to use the SoCAL access macros and alt_read_word() and + * alt_write_word() functions. + * + * The struct declaration for register ALT_CLKMGR_PERPLL_DIV. + */ +struct ALT_CLKMGR_PERPLL_DIV_s +{ + uint32_t usbclk : 3; /* USB Clock Divider */ + uint32_t spimclk : 3; /* SPI Master Clock Divider */ + uint32_t can0clk : 3; /* CAN0 Clock Divider */ + uint32_t can1clk : 3; /* CAN1 Clock Divider */ + uint32_t : 20; /* *UNDEFINED* */ +}; + +/* The typedef declaration for register ALT_CLKMGR_PERPLL_DIV. */ +typedef volatile struct ALT_CLKMGR_PERPLL_DIV_s ALT_CLKMGR_PERPLL_DIV_t; +#endif /* __ASSEMBLY__ */ + +/* The byte offset of the ALT_CLKMGR_PERPLL_DIV register from the beginning of the component. */ +#define ALT_CLKMGR_PERPLL_DIV_OFST 0x24 + +/* + * Register : GPIO Divide Register - gpiodiv + * + * Contains a field that controls the clock divider for the GPIO De-bounce clock. + * + * Only reset by a cold reset. + * + * Register Layout + * + * Bits | Access | Reset | Description + * :--------|:-------|:------|:----------------------------- + * [23:0] | RW | 0x1 | GPIO De-bounce Clock Divider + * [31:24] | ??? | 0x0 | *UNDEFINED* + * + */ +/* + * Field : GPIO De-bounce Clock Divider - gpiodbclk + * + * The gpio_db_clk is divided down from the periph_base_clk by the value plus one + * specified in this field. The value 0 (divide by 1) is illegal. A value of 1 + * indicates divide by 2, 2 divide by 3, etc. + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_PERPLL_GPIODIV_GPIODBCLK register field. */ +#define ALT_CLKMGR_PERPLL_GPIODIV_GPIODBCLK_LSB 0 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_PERPLL_GPIODIV_GPIODBCLK register field. */ +#define ALT_CLKMGR_PERPLL_GPIODIV_GPIODBCLK_MSB 23 +/* The width in bits of the ALT_CLKMGR_PERPLL_GPIODIV_GPIODBCLK register field. */ +#define ALT_CLKMGR_PERPLL_GPIODIV_GPIODBCLK_WIDTH 24 +/* The mask used to set the ALT_CLKMGR_PERPLL_GPIODIV_GPIODBCLK register field value. */ +#define ALT_CLKMGR_PERPLL_GPIODIV_GPIODBCLK_SET_MSK 0x00ffffff +/* The mask used to clear the ALT_CLKMGR_PERPLL_GPIODIV_GPIODBCLK register field value. */ +#define ALT_CLKMGR_PERPLL_GPIODIV_GPIODBCLK_CLR_MSK 0xff000000 +/* The reset value of the ALT_CLKMGR_PERPLL_GPIODIV_GPIODBCLK register field. */ +#define ALT_CLKMGR_PERPLL_GPIODIV_GPIODBCLK_RESET 0x1 +/* Extracts the ALT_CLKMGR_PERPLL_GPIODIV_GPIODBCLK field value from a register. */ +#define ALT_CLKMGR_PERPLL_GPIODIV_GPIODBCLK_GET(value) (((value) & 0x00ffffff) >> 0) +/* Produces a ALT_CLKMGR_PERPLL_GPIODIV_GPIODBCLK register field value suitable for setting the register. */ +#define ALT_CLKMGR_PERPLL_GPIODIV_GPIODBCLK_SET(value) (((value) << 0) & 0x00ffffff) + +#ifndef __ASSEMBLY__ +/* + * WARNING: The C register and register group struct declarations are provided for + * convenience and illustrative purposes. They should, however, be used with + * caution as the C language standard provides no guarantees about the alignment or + * atomicity of device memory accesses. The recommended practice for writing + * hardware drivers is to use the SoCAL access macros and alt_read_word() and + * alt_write_word() functions. + * + * The struct declaration for register ALT_CLKMGR_PERPLL_GPIODIV. + */ +struct ALT_CLKMGR_PERPLL_GPIODIV_s +{ + uint32_t gpiodbclk : 24; /* GPIO De-bounce Clock Divider */ + uint32_t : 8; /* *UNDEFINED* */ +}; + +/* The typedef declaration for register ALT_CLKMGR_PERPLL_GPIODIV. */ +typedef volatile struct ALT_CLKMGR_PERPLL_GPIODIV_s ALT_CLKMGR_PERPLL_GPIODIV_t; +#endif /* __ASSEMBLY__ */ + +/* The byte offset of the ALT_CLKMGR_PERPLL_GPIODIV register from the beginning of the component. */ +#define ALT_CLKMGR_PERPLL_GPIODIV_OFST 0x28 + +/* + * Register : Flash Clock Source Register - src + * + * Contains fields that select the source clocks for the flash controllers. + * + * Fields are only reset by a cold reset. + * + * Register Layout + * + * Bits | Access | Reset | Description + * :-------|:-------|:------|:------------------- + * [1:0] | RW | 0x1 | SDMMC Clock Source + * [3:2] | RW | 0x1 | NAND Clock Source + * [5:4] | RW | 0x1 | QSPI Clock Source + * [31:6] | ??? | 0x0 | *UNDEFINED* + * + */ +/* + * Field : SDMMC Clock Source - sdmmc + * + * Selects the source clock for the SDMMC. + * + * Qsys and user documenation refer to f2s_periph_ref_clk as f2h_periph_ref_clk. + * + * Field Enumeration Values: + * + * Enum | Value | Description + * :-------------------------------------------------|:------|:---------------------- + * ALT_CLKMGR_PERPLL_SRC_SDMMC_E_F2S_PERIPH_REF_CLK | 0x0 | f2s_periph_ref_clk + * ALT_CLKMGR_PERPLL_SRC_SDMMC_E_MAIN_NAND_CLK | 0x1 | main_nand_sdmmc_clk + * ALT_CLKMGR_PERPLL_SRC_SDMMC_E_PERIPH_NAND_CLK | 0x2 | periph_nand_sdmmc_clk + * + * Field Access Macros: + * + */ +/* + * Enumerated value for register field ALT_CLKMGR_PERPLL_SRC_SDMMC + * + * f2s_periph_ref_clk + */ +#define ALT_CLKMGR_PERPLL_SRC_SDMMC_E_F2S_PERIPH_REF_CLK 0x0 +/* + * Enumerated value for register field ALT_CLKMGR_PERPLL_SRC_SDMMC + * + * main_nand_sdmmc_clk + */ +#define ALT_CLKMGR_PERPLL_SRC_SDMMC_E_MAIN_NAND_CLK 0x1 +/* + * Enumerated value for register field ALT_CLKMGR_PERPLL_SRC_SDMMC + * + * periph_nand_sdmmc_clk + */ +#define ALT_CLKMGR_PERPLL_SRC_SDMMC_E_PERIPH_NAND_CLK 0x2 + +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_PERPLL_SRC_SDMMC register field. */ +#define ALT_CLKMGR_PERPLL_SRC_SDMMC_LSB 0 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_PERPLL_SRC_SDMMC register field. */ +#define ALT_CLKMGR_PERPLL_SRC_SDMMC_MSB 1 +/* The width in bits of the ALT_CLKMGR_PERPLL_SRC_SDMMC register field. */ +#define ALT_CLKMGR_PERPLL_SRC_SDMMC_WIDTH 2 +/* The mask used to set the ALT_CLKMGR_PERPLL_SRC_SDMMC register field value. */ +#define ALT_CLKMGR_PERPLL_SRC_SDMMC_SET_MSK 0x00000003 +/* The mask used to clear the ALT_CLKMGR_PERPLL_SRC_SDMMC register field value. */ +#define ALT_CLKMGR_PERPLL_SRC_SDMMC_CLR_MSK 0xfffffffc +/* The reset value of the ALT_CLKMGR_PERPLL_SRC_SDMMC register field. */ +#define ALT_CLKMGR_PERPLL_SRC_SDMMC_RESET 0x1 +/* Extracts the ALT_CLKMGR_PERPLL_SRC_SDMMC field value from a register. */ +#define ALT_CLKMGR_PERPLL_SRC_SDMMC_GET(value) (((value) & 0x00000003) >> 0) +/* Produces a ALT_CLKMGR_PERPLL_SRC_SDMMC register field value suitable for setting the register. */ +#define ALT_CLKMGR_PERPLL_SRC_SDMMC_SET(value) (((value) << 0) & 0x00000003) + +/* + * Field : NAND Clock Source - nand + * + * Selects the source clock for the NAND. + * + * Qsys and user documenation refer to f2s_periph_ref_clk as f2h_periph_ref_clk. + * + * Field Enumeration Values: + * + * Enum | Value | Description + * :------------------------------------------------|:------|:---------------------- + * ALT_CLKMGR_PERPLL_SRC_NAND_E_F2S_PERIPH_REF_CLK | 0x0 | f2s_periph_ref_clk + * ALT_CLKMGR_PERPLL_SRC_NAND_E_MAIN_NAND_CLK | 0x1 | main_nand_sdmmc_clk + * ALT_CLKMGR_PERPLL_SRC_NAND_E_PERIPH_NAND_CLK | 0x2 | periph_nand_sdmmc_clk + * + * Field Access Macros: + * + */ +/* + * Enumerated value for register field ALT_CLKMGR_PERPLL_SRC_NAND + * + * f2s_periph_ref_clk + */ +#define ALT_CLKMGR_PERPLL_SRC_NAND_E_F2S_PERIPH_REF_CLK 0x0 +/* + * Enumerated value for register field ALT_CLKMGR_PERPLL_SRC_NAND + * + * main_nand_sdmmc_clk + */ +#define ALT_CLKMGR_PERPLL_SRC_NAND_E_MAIN_NAND_CLK 0x1 +/* + * Enumerated value for register field ALT_CLKMGR_PERPLL_SRC_NAND + * + * periph_nand_sdmmc_clk + */ +#define ALT_CLKMGR_PERPLL_SRC_NAND_E_PERIPH_NAND_CLK 0x2 + +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_PERPLL_SRC_NAND register field. */ +#define ALT_CLKMGR_PERPLL_SRC_NAND_LSB 2 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_PERPLL_SRC_NAND register field. */ +#define ALT_CLKMGR_PERPLL_SRC_NAND_MSB 3 +/* The width in bits of the ALT_CLKMGR_PERPLL_SRC_NAND register field. */ +#define ALT_CLKMGR_PERPLL_SRC_NAND_WIDTH 2 +/* The mask used to set the ALT_CLKMGR_PERPLL_SRC_NAND register field value. */ +#define ALT_CLKMGR_PERPLL_SRC_NAND_SET_MSK 0x0000000c +/* The mask used to clear the ALT_CLKMGR_PERPLL_SRC_NAND register field value. */ +#define ALT_CLKMGR_PERPLL_SRC_NAND_CLR_MSK 0xfffffff3 +/* The reset value of the ALT_CLKMGR_PERPLL_SRC_NAND register field. */ +#define ALT_CLKMGR_PERPLL_SRC_NAND_RESET 0x1 +/* Extracts the ALT_CLKMGR_PERPLL_SRC_NAND field value from a register. */ +#define ALT_CLKMGR_PERPLL_SRC_NAND_GET(value) (((value) & 0x0000000c) >> 2) +/* Produces a ALT_CLKMGR_PERPLL_SRC_NAND register field value suitable for setting the register. */ +#define ALT_CLKMGR_PERPLL_SRC_NAND_SET(value) (((value) << 2) & 0x0000000c) + +/* + * Field : QSPI Clock Source - qspi + * + * Selects the source clock for the QSPI. + * + * Qsys and user documenation refer to f2s_periph_ref_clk as f2h_periph_ref_clk. + * + * Field Enumeration Values: + * + * Enum | Value | Description + * :------------------------------------------------|:------|:------------------- + * ALT_CLKMGR_PERPLL_SRC_QSPI_E_F2S_PERIPH_REF_CLK | 0x0 | f2s_periph_ref_clk + * ALT_CLKMGR_PERPLL_SRC_QSPI_E_MAIN_QSPI_CLK | 0x1 | main_qspi_clk + * ALT_CLKMGR_PERPLL_SRC_QSPI_E_PERIPH_QSPI_CLK | 0x2 | periph_qspi_clk + * + * Field Access Macros: + * + */ +/* + * Enumerated value for register field ALT_CLKMGR_PERPLL_SRC_QSPI + * + * f2s_periph_ref_clk + */ +#define ALT_CLKMGR_PERPLL_SRC_QSPI_E_F2S_PERIPH_REF_CLK 0x0 +/* + * Enumerated value for register field ALT_CLKMGR_PERPLL_SRC_QSPI + * + * main_qspi_clk + */ +#define ALT_CLKMGR_PERPLL_SRC_QSPI_E_MAIN_QSPI_CLK 0x1 +/* + * Enumerated value for register field ALT_CLKMGR_PERPLL_SRC_QSPI + * + * periph_qspi_clk + */ +#define ALT_CLKMGR_PERPLL_SRC_QSPI_E_PERIPH_QSPI_CLK 0x2 + +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_PERPLL_SRC_QSPI register field. */ +#define ALT_CLKMGR_PERPLL_SRC_QSPI_LSB 4 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_PERPLL_SRC_QSPI register field. */ +#define ALT_CLKMGR_PERPLL_SRC_QSPI_MSB 5 +/* The width in bits of the ALT_CLKMGR_PERPLL_SRC_QSPI register field. */ +#define ALT_CLKMGR_PERPLL_SRC_QSPI_WIDTH 2 +/* The mask used to set the ALT_CLKMGR_PERPLL_SRC_QSPI register field value. */ +#define ALT_CLKMGR_PERPLL_SRC_QSPI_SET_MSK 0x00000030 +/* The mask used to clear the ALT_CLKMGR_PERPLL_SRC_QSPI register field value. */ +#define ALT_CLKMGR_PERPLL_SRC_QSPI_CLR_MSK 0xffffffcf +/* The reset value of the ALT_CLKMGR_PERPLL_SRC_QSPI register field. */ +#define ALT_CLKMGR_PERPLL_SRC_QSPI_RESET 0x1 +/* Extracts the ALT_CLKMGR_PERPLL_SRC_QSPI field value from a register. */ +#define ALT_CLKMGR_PERPLL_SRC_QSPI_GET(value) (((value) & 0x00000030) >> 4) +/* Produces a ALT_CLKMGR_PERPLL_SRC_QSPI register field value suitable for setting the register. */ +#define ALT_CLKMGR_PERPLL_SRC_QSPI_SET(value) (((value) << 4) & 0x00000030) + +#ifndef __ASSEMBLY__ +/* + * WARNING: The C register and register group struct declarations are provided for + * convenience and illustrative purposes. They should, however, be used with + * caution as the C language standard provides no guarantees about the alignment or + * atomicity of device memory accesses. The recommended practice for writing + * hardware drivers is to use the SoCAL access macros and alt_read_word() and + * alt_write_word() functions. + * + * The struct declaration for register ALT_CLKMGR_PERPLL_SRC. + */ +struct ALT_CLKMGR_PERPLL_SRC_s +{ + uint32_t sdmmc : 2; /* SDMMC Clock Source */ + uint32_t nand : 2; /* NAND Clock Source */ + uint32_t qspi : 2; /* QSPI Clock Source */ + uint32_t : 26; /* *UNDEFINED* */ +}; + +/* The typedef declaration for register ALT_CLKMGR_PERPLL_SRC. */ +typedef volatile struct ALT_CLKMGR_PERPLL_SRC_s ALT_CLKMGR_PERPLL_SRC_t; +#endif /* __ASSEMBLY__ */ + +/* The byte offset of the ALT_CLKMGR_PERPLL_SRC register from the beginning of the component. */ +#define ALT_CLKMGR_PERPLL_SRC_OFST 0x2c + +/* + * Register : Peripheral PLL Output Counter Reset Ack Status Register - stat + * + * Contains Output Clock Counter Reset acknowledge status. + * + * Register Layout + * + * Bits | Access | Reset | Description + * :-------|:-------|:------|:--------------------------------- + * [5:0] | R | 0x0 | Output Counter Reset Acknowledge + * [31:6] | ??? | 0x0 | *UNDEFINED* + * + */ +/* + * Field : Output Counter Reset Acknowledge - outresetack + * + * These read only bits per PLL output indicate that the PLL has received the + * Output Reset Counter request and has gracefully stopped the respective PLL + * output clock. + * + * For software to change the PLL output counter without producing glitches on the + * respective clock, SW must set the VCO register respective Output Counter Reset + * bit. Software then polls the respective Output Counter Reset Acknowledge bit in + * the Output Counter Reset Ack Status Register. Software then writes the + * appropriate counter register, and then clears the respective VCO register Output + * Counter Reset bit. + * + * The reset value of this bit is applied on a cold reset; warm reset has no affect + * on this bit. + * + * Field Enumeration Values: + * + * Enum | Value | Description + * :-------------------------------------------|:------|:------------------------------------- + * ALT_CLKMGR_PERPLL_STAT_OUTRSTACK_E_IDLE | 0x0 | Idle + * ALT_CLKMGR_PERPLL_STAT_OUTRSTACK_E_ACK_RXD | 0x1 | Output Counter Acknowledge received. + * + * Field Access Macros: + * + */ +/* + * Enumerated value for register field ALT_CLKMGR_PERPLL_STAT_OUTRSTACK + * + * Idle + */ +#define ALT_CLKMGR_PERPLL_STAT_OUTRSTACK_E_IDLE 0x0 +/* + * Enumerated value for register field ALT_CLKMGR_PERPLL_STAT_OUTRSTACK + * + * Output Counter Acknowledge received. + */ +#define ALT_CLKMGR_PERPLL_STAT_OUTRSTACK_E_ACK_RXD 0x1 + +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_PERPLL_STAT_OUTRSTACK register field. */ +#define ALT_CLKMGR_PERPLL_STAT_OUTRSTACK_LSB 0 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_PERPLL_STAT_OUTRSTACK register field. */ +#define ALT_CLKMGR_PERPLL_STAT_OUTRSTACK_MSB 5 +/* The width in bits of the ALT_CLKMGR_PERPLL_STAT_OUTRSTACK register field. */ +#define ALT_CLKMGR_PERPLL_STAT_OUTRSTACK_WIDTH 6 +/* The mask used to set the ALT_CLKMGR_PERPLL_STAT_OUTRSTACK register field value. */ +#define ALT_CLKMGR_PERPLL_STAT_OUTRSTACK_SET_MSK 0x0000003f +/* The mask used to clear the ALT_CLKMGR_PERPLL_STAT_OUTRSTACK register field value. */ +#define ALT_CLKMGR_PERPLL_STAT_OUTRSTACK_CLR_MSK 0xffffffc0 +/* The reset value of the ALT_CLKMGR_PERPLL_STAT_OUTRSTACK register field. */ +#define ALT_CLKMGR_PERPLL_STAT_OUTRSTACK_RESET 0x0 +/* Extracts the ALT_CLKMGR_PERPLL_STAT_OUTRSTACK field value from a register. */ +#define ALT_CLKMGR_PERPLL_STAT_OUTRSTACK_GET(value) (((value) & 0x0000003f) >> 0) +/* Produces a ALT_CLKMGR_PERPLL_STAT_OUTRSTACK register field value suitable for setting the register. */ +#define ALT_CLKMGR_PERPLL_STAT_OUTRSTACK_SET(value) (((value) << 0) & 0x0000003f) + +#ifndef __ASSEMBLY__ +/* + * WARNING: The C register and register group struct declarations are provided for + * convenience and illustrative purposes. They should, however, be used with + * caution as the C language standard provides no guarantees about the alignment or + * atomicity of device memory accesses. The recommended practice for writing + * hardware drivers is to use the SoCAL access macros and alt_read_word() and + * alt_write_word() functions. + * + * The struct declaration for register ALT_CLKMGR_PERPLL_STAT. + */ +struct ALT_CLKMGR_PERPLL_STAT_s +{ + const uint32_t outresetack : 6; /* Output Counter Reset Acknowledge */ + uint32_t : 26; /* *UNDEFINED* */ +}; + +/* The typedef declaration for register ALT_CLKMGR_PERPLL_STAT. */ +typedef volatile struct ALT_CLKMGR_PERPLL_STAT_s ALT_CLKMGR_PERPLL_STAT_t; +#endif /* __ASSEMBLY__ */ + +/* The byte offset of the ALT_CLKMGR_PERPLL_STAT register from the beginning of the component. */ +#define ALT_CLKMGR_PERPLL_STAT_OFST 0x30 + +#ifndef __ASSEMBLY__ +/* + * WARNING: The C register and register group struct declarations are provided for + * convenience and illustrative purposes. They should, however, be used with + * caution as the C language standard provides no guarantees about the alignment or + * atomicity of device memory accesses. The recommended practice for writing + * hardware drivers is to use the SoCAL access macros and alt_read_word() and + * alt_write_word() functions. + * + * The struct declaration for register group ALT_CLKMGR_PERPLL. + */ +struct ALT_CLKMGR_PERPLL_s +{ + volatile ALT_CLKMGR_PERPLL_VCO_t vco; /* ALT_CLKMGR_PERPLL_VCO */ + volatile ALT_CLKMGR_PERPLL_MISC_t misc; /* ALT_CLKMGR_PERPLL_MISC */ + volatile ALT_CLKMGR_PERPLL_EMAC0CLK_t emac0clk; /* ALT_CLKMGR_PERPLL_EMAC0CLK */ + volatile ALT_CLKMGR_PERPLL_EMAC1CLK_t emac1clk; /* ALT_CLKMGR_PERPLL_EMAC1CLK */ + volatile ALT_CLKMGR_PERPLL_PERQSPICLK_t perqspiclk; /* ALT_CLKMGR_PERPLL_PERQSPICLK */ + volatile ALT_CLKMGR_PERPLL_PERNANDSDMMCCLK_t pernandsdmmcclk; /* ALT_CLKMGR_PERPLL_PERNANDSDMMCCLK */ + volatile ALT_CLKMGR_PERPLL_PERBASECLK_t perbaseclk; /* ALT_CLKMGR_PERPLL_PERBASECLK */ + volatile ALT_CLKMGR_PERPLL_S2FUSER1CLK_t s2fuser1clk; /* ALT_CLKMGR_PERPLL_S2FUSER1CLK */ + volatile ALT_CLKMGR_PERPLL_EN_t en; /* ALT_CLKMGR_PERPLL_EN */ + volatile ALT_CLKMGR_PERPLL_DIV_t div; /* ALT_CLKMGR_PERPLL_DIV */ + volatile ALT_CLKMGR_PERPLL_GPIODIV_t gpiodiv; /* ALT_CLKMGR_PERPLL_GPIODIV */ + volatile ALT_CLKMGR_PERPLL_SRC_t src; /* ALT_CLKMGR_PERPLL_SRC */ + volatile ALT_CLKMGR_PERPLL_STAT_t stat; /* ALT_CLKMGR_PERPLL_STAT */ + volatile uint32_t _pad_0x34_0x40[3]; /* *UNDEFINED* */ +}; + +/* The typedef declaration for register group ALT_CLKMGR_PERPLL. */ +typedef volatile struct ALT_CLKMGR_PERPLL_s ALT_CLKMGR_PERPLL_t; +/* The struct declaration for the raw register contents of register group ALT_CLKMGR_PERPLL. */ +struct ALT_CLKMGR_PERPLL_raw_s +{ + volatile uint32_t vco; /* ALT_CLKMGR_PERPLL_VCO */ + volatile uint32_t misc; /* ALT_CLKMGR_PERPLL_MISC */ + volatile uint32_t emac0clk; /* ALT_CLKMGR_PERPLL_EMAC0CLK */ + volatile uint32_t emac1clk; /* ALT_CLKMGR_PERPLL_EMAC1CLK */ + volatile uint32_t perqspiclk; /* ALT_CLKMGR_PERPLL_PERQSPICLK */ + volatile uint32_t pernandsdmmcclk; /* ALT_CLKMGR_PERPLL_PERNANDSDMMCCLK */ + volatile uint32_t perbaseclk; /* ALT_CLKMGR_PERPLL_PERBASECLK */ + volatile uint32_t s2fuser1clk; /* ALT_CLKMGR_PERPLL_S2FUSER1CLK */ + volatile uint32_t en; /* ALT_CLKMGR_PERPLL_EN */ + volatile uint32_t div; /* ALT_CLKMGR_PERPLL_DIV */ + volatile uint32_t gpiodiv; /* ALT_CLKMGR_PERPLL_GPIODIV */ + volatile uint32_t src; /* ALT_CLKMGR_PERPLL_SRC */ + volatile uint32_t stat; /* ALT_CLKMGR_PERPLL_STAT */ + volatile uint32_t _pad_0x34_0x40[3]; /* *UNDEFINED* */ +}; + +/* The typedef declaration for the raw register contents of register group ALT_CLKMGR_PERPLL. */ +typedef volatile struct ALT_CLKMGR_PERPLL_raw_s ALT_CLKMGR_PERPLL_raw_t; +#endif /* __ASSEMBLY__ */ + + +/* + * Register Group : SDRAM PLL Group - ALT_CLKMGR_SDRPLL + * SDRAM PLL Group + * + * Contains registers with settings for the SDRAM PLL. + * + */ +/* + * Register : SDRAM PLL VCO Control Register - vco + * + * Contains settings that control the SDRAM PLL VCO. The VCO output frequency is + * the input frequency multiplied by the numerator (M+1) and divided by the + * denominator (N+1). + * + * Fields are only reset by a cold reset. + * + * Register Layout + * + * Bits | Access | Reset | Description + * :--------|:-------|:------|:-------------------------------- + * [0] | RW | 0x1 | BG PWRDN + * [1] | RW | 0x0 | Enable + * [2] | RW | 0x1 | Power down + * [15:3] | RW | 0x1 | Numerator (M) + * [21:16] | RW | 0x1 | Denominator (N) + * [23:22] | RW | 0x0 | Clock Source + * [24] | RW | 0x0 | SDRAM All Output Counter Reset + * [30:25] | RW | 0x0 | Output Counter Reset + * [31] | RW | 0x1 | External Regulator Input Select + * + */ +/* + * Field : BG PWRDN - bgpwrdn + * + * If '1', powers down bandgap. If '0', bandgap is not power down. + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_SDRPLL_VCO_BGPWRDN register field. */ +#define ALT_CLKMGR_SDRPLL_VCO_BGPWRDN_LSB 0 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_SDRPLL_VCO_BGPWRDN register field. */ +#define ALT_CLKMGR_SDRPLL_VCO_BGPWRDN_MSB 0 +/* The width in bits of the ALT_CLKMGR_SDRPLL_VCO_BGPWRDN register field. */ +#define ALT_CLKMGR_SDRPLL_VCO_BGPWRDN_WIDTH 1 +/* The mask used to set the ALT_CLKMGR_SDRPLL_VCO_BGPWRDN register field value. */ +#define ALT_CLKMGR_SDRPLL_VCO_BGPWRDN_SET_MSK 0x00000001 +/* The mask used to clear the ALT_CLKMGR_SDRPLL_VCO_BGPWRDN register field value. */ +#define ALT_CLKMGR_SDRPLL_VCO_BGPWRDN_CLR_MSK 0xfffffffe +/* The reset value of the ALT_CLKMGR_SDRPLL_VCO_BGPWRDN register field. */ +#define ALT_CLKMGR_SDRPLL_VCO_BGPWRDN_RESET 0x1 +/* Extracts the ALT_CLKMGR_SDRPLL_VCO_BGPWRDN field value from a register. */ +#define ALT_CLKMGR_SDRPLL_VCO_BGPWRDN_GET(value) (((value) & 0x00000001) >> 0) +/* Produces a ALT_CLKMGR_SDRPLL_VCO_BGPWRDN register field value suitable for setting the register. */ +#define ALT_CLKMGR_SDRPLL_VCO_BGPWRDN_SET(value) (((value) << 0) & 0x00000001) + +/* + * Field : Enable - en + * + * If '1', VCO is enabled. If '0', VCO is in reset. + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_SDRPLL_VCO_EN register field. */ +#define ALT_CLKMGR_SDRPLL_VCO_EN_LSB 1 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_SDRPLL_VCO_EN register field. */ +#define ALT_CLKMGR_SDRPLL_VCO_EN_MSB 1 +/* The width in bits of the ALT_CLKMGR_SDRPLL_VCO_EN register field. */ +#define ALT_CLKMGR_SDRPLL_VCO_EN_WIDTH 1 +/* The mask used to set the ALT_CLKMGR_SDRPLL_VCO_EN register field value. */ +#define ALT_CLKMGR_SDRPLL_VCO_EN_SET_MSK 0x00000002 +/* The mask used to clear the ALT_CLKMGR_SDRPLL_VCO_EN register field value. */ +#define ALT_CLKMGR_SDRPLL_VCO_EN_CLR_MSK 0xfffffffd +/* The reset value of the ALT_CLKMGR_SDRPLL_VCO_EN register field. */ +#define ALT_CLKMGR_SDRPLL_VCO_EN_RESET 0x0 +/* Extracts the ALT_CLKMGR_SDRPLL_VCO_EN field value from a register. */ +#define ALT_CLKMGR_SDRPLL_VCO_EN_GET(value) (((value) & 0x00000002) >> 1) +/* Produces a ALT_CLKMGR_SDRPLL_VCO_EN register field value suitable for setting the register. */ +#define ALT_CLKMGR_SDRPLL_VCO_EN_SET(value) (((value) << 1) & 0x00000002) + +/* + * Field : Power down - pwrdn + * + * If '1', power down analog circuitry. If '0', analog circuitry not powered down. + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_SDRPLL_VCO_PWRDN register field. */ +#define ALT_CLKMGR_SDRPLL_VCO_PWRDN_LSB 2 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_SDRPLL_VCO_PWRDN register field. */ +#define ALT_CLKMGR_SDRPLL_VCO_PWRDN_MSB 2 +/* The width in bits of the ALT_CLKMGR_SDRPLL_VCO_PWRDN register field. */ +#define ALT_CLKMGR_SDRPLL_VCO_PWRDN_WIDTH 1 +/* The mask used to set the ALT_CLKMGR_SDRPLL_VCO_PWRDN register field value. */ +#define ALT_CLKMGR_SDRPLL_VCO_PWRDN_SET_MSK 0x00000004 +/* The mask used to clear the ALT_CLKMGR_SDRPLL_VCO_PWRDN register field value. */ +#define ALT_CLKMGR_SDRPLL_VCO_PWRDN_CLR_MSK 0xfffffffb +/* The reset value of the ALT_CLKMGR_SDRPLL_VCO_PWRDN register field. */ +#define ALT_CLKMGR_SDRPLL_VCO_PWRDN_RESET 0x1 +/* Extracts the ALT_CLKMGR_SDRPLL_VCO_PWRDN field value from a register. */ +#define ALT_CLKMGR_SDRPLL_VCO_PWRDN_GET(value) (((value) & 0x00000004) >> 2) +/* Produces a ALT_CLKMGR_SDRPLL_VCO_PWRDN register field value suitable for setting the register. */ +#define ALT_CLKMGR_SDRPLL_VCO_PWRDN_SET(value) (((value) << 2) & 0x00000004) + +/* + * Field : Numerator (M) - numer + * + * Numerator in VCO output frequency equation. For incremental frequency change, if + * the new value lead to less than 20% of the frequency change, this value can be + * changed without resetting the PLL. The Numerator and Denominator can not be + * changed at the same time for incremental frequency changed. + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_SDRPLL_VCO_NUMER register field. */ +#define ALT_CLKMGR_SDRPLL_VCO_NUMER_LSB 3 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_SDRPLL_VCO_NUMER register field. */ +#define ALT_CLKMGR_SDRPLL_VCO_NUMER_MSB 15 +/* The width in bits of the ALT_CLKMGR_SDRPLL_VCO_NUMER register field. */ +#define ALT_CLKMGR_SDRPLL_VCO_NUMER_WIDTH 13 +/* The mask used to set the ALT_CLKMGR_SDRPLL_VCO_NUMER register field value. */ +#define ALT_CLKMGR_SDRPLL_VCO_NUMER_SET_MSK 0x0000fff8 +/* The mask used to clear the ALT_CLKMGR_SDRPLL_VCO_NUMER register field value. */ +#define ALT_CLKMGR_SDRPLL_VCO_NUMER_CLR_MSK 0xffff0007 +/* The reset value of the ALT_CLKMGR_SDRPLL_VCO_NUMER register field. */ +#define ALT_CLKMGR_SDRPLL_VCO_NUMER_RESET 0x1 +/* Extracts the ALT_CLKMGR_SDRPLL_VCO_NUMER field value from a register. */ +#define ALT_CLKMGR_SDRPLL_VCO_NUMER_GET(value) (((value) & 0x0000fff8) >> 3) +/* Produces a ALT_CLKMGR_SDRPLL_VCO_NUMER register field value suitable for setting the register. */ +#define ALT_CLKMGR_SDRPLL_VCO_NUMER_SET(value) (((value) << 3) & 0x0000fff8) + +/* + * Field : Denominator (N) - denom + * + * Denominator in VCO output frequency equation. For incremental frequency change, + * if the new value lead to less than 20% of the frequency change, this value can + * be changed without resetting the PLL. The Numerator and Denominator can not be + * changed at the same time for incremental frequency changed. + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_SDRPLL_VCO_DENOM register field. */ +#define ALT_CLKMGR_SDRPLL_VCO_DENOM_LSB 16 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_SDRPLL_VCO_DENOM register field. */ +#define ALT_CLKMGR_SDRPLL_VCO_DENOM_MSB 21 +/* The width in bits of the ALT_CLKMGR_SDRPLL_VCO_DENOM register field. */ +#define ALT_CLKMGR_SDRPLL_VCO_DENOM_WIDTH 6 +/* The mask used to set the ALT_CLKMGR_SDRPLL_VCO_DENOM register field value. */ +#define ALT_CLKMGR_SDRPLL_VCO_DENOM_SET_MSK 0x003f0000 +/* The mask used to clear the ALT_CLKMGR_SDRPLL_VCO_DENOM register field value. */ +#define ALT_CLKMGR_SDRPLL_VCO_DENOM_CLR_MSK 0xffc0ffff +/* The reset value of the ALT_CLKMGR_SDRPLL_VCO_DENOM register field. */ +#define ALT_CLKMGR_SDRPLL_VCO_DENOM_RESET 0x1 +/* Extracts the ALT_CLKMGR_SDRPLL_VCO_DENOM field value from a register. */ +#define ALT_CLKMGR_SDRPLL_VCO_DENOM_GET(value) (((value) & 0x003f0000) >> 16) +/* Produces a ALT_CLKMGR_SDRPLL_VCO_DENOM register field value suitable for setting the register. */ +#define ALT_CLKMGR_SDRPLL_VCO_DENOM_SET(value) (((value) << 16) & 0x003f0000) + +/* + * Field : Clock Source - ssrc + * + * Controls the VCO input clock source. The PLL must by bypassed to eosc1_clk + * before changing this field. + * + * Qsys and user documenation refer to f2s_sdram_ref_clk as f2h_sdram_ref_clk. + * + * Field Enumeration Values: + * + * Enum | Value | Description + * :-------------------------------------------|:------|:------------------ + * ALT_CLKMGR_SDRPLL_VCO_SSRC_E_EOSC1 | 0x0 | eosc1_clk + * ALT_CLKMGR_SDRPLL_VCO_SSRC_E_EOSC2 | 0x1 | eosc2_clk + * ALT_CLKMGR_SDRPLL_VCO_SSRC_E_F2S_SDRAM_REF | 0x2 | f2s_sdram_ref_clk + * + * Field Access Macros: + * + */ +/* + * Enumerated value for register field ALT_CLKMGR_SDRPLL_VCO_SSRC + * + * eosc1_clk + */ +#define ALT_CLKMGR_SDRPLL_VCO_SSRC_E_EOSC1 0x0 +/* + * Enumerated value for register field ALT_CLKMGR_SDRPLL_VCO_SSRC + * + * eosc2_clk + */ +#define ALT_CLKMGR_SDRPLL_VCO_SSRC_E_EOSC2 0x1 +/* + * Enumerated value for register field ALT_CLKMGR_SDRPLL_VCO_SSRC + * + * f2s_sdram_ref_clk + */ +#define ALT_CLKMGR_SDRPLL_VCO_SSRC_E_F2S_SDRAM_REF 0x2 + +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_SDRPLL_VCO_SSRC register field. */ +#define ALT_CLKMGR_SDRPLL_VCO_SSRC_LSB 22 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_SDRPLL_VCO_SSRC register field. */ +#define ALT_CLKMGR_SDRPLL_VCO_SSRC_MSB 23 +/* The width in bits of the ALT_CLKMGR_SDRPLL_VCO_SSRC register field. */ +#define ALT_CLKMGR_SDRPLL_VCO_SSRC_WIDTH 2 +/* The mask used to set the ALT_CLKMGR_SDRPLL_VCO_SSRC register field value. */ +#define ALT_CLKMGR_SDRPLL_VCO_SSRC_SET_MSK 0x00c00000 +/* The mask used to clear the ALT_CLKMGR_SDRPLL_VCO_SSRC register field value. */ +#define ALT_CLKMGR_SDRPLL_VCO_SSRC_CLR_MSK 0xff3fffff +/* The reset value of the ALT_CLKMGR_SDRPLL_VCO_SSRC register field. */ +#define ALT_CLKMGR_SDRPLL_VCO_SSRC_RESET 0x0 +/* Extracts the ALT_CLKMGR_SDRPLL_VCO_SSRC field value from a register. */ +#define ALT_CLKMGR_SDRPLL_VCO_SSRC_GET(value) (((value) & 0x00c00000) >> 22) +/* Produces a ALT_CLKMGR_SDRPLL_VCO_SSRC register field value suitable for setting the register. */ +#define ALT_CLKMGR_SDRPLL_VCO_SSRC_SET(value) (((value) << 22) & 0x00c00000) + +/* + * Field : SDRAM All Output Counter Reset - outresetall + * + * Before releasing Bypass, All Output Counter Reset must be set and cleared by + * software for correct clock operation. + * + * If '1', Reset phase multiplexer and output counter state. So that after the + * assertion all the clocks output are start from rising edge align. + * + * If '0', phase multiplexer and output counter state not reset and no change to + * the phase of the clock outputs. + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_SDRPLL_VCO_OUTRSTALL register field. */ +#define ALT_CLKMGR_SDRPLL_VCO_OUTRSTALL_LSB 24 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_SDRPLL_VCO_OUTRSTALL register field. */ +#define ALT_CLKMGR_SDRPLL_VCO_OUTRSTALL_MSB 24 +/* The width in bits of the ALT_CLKMGR_SDRPLL_VCO_OUTRSTALL register field. */ +#define ALT_CLKMGR_SDRPLL_VCO_OUTRSTALL_WIDTH 1 +/* The mask used to set the ALT_CLKMGR_SDRPLL_VCO_OUTRSTALL register field value. */ +#define ALT_CLKMGR_SDRPLL_VCO_OUTRSTALL_SET_MSK 0x01000000 +/* The mask used to clear the ALT_CLKMGR_SDRPLL_VCO_OUTRSTALL register field value. */ +#define ALT_CLKMGR_SDRPLL_VCO_OUTRSTALL_CLR_MSK 0xfeffffff +/* The reset value of the ALT_CLKMGR_SDRPLL_VCO_OUTRSTALL register field. */ +#define ALT_CLKMGR_SDRPLL_VCO_OUTRSTALL_RESET 0x0 +/* Extracts the ALT_CLKMGR_SDRPLL_VCO_OUTRSTALL field value from a register. */ +#define ALT_CLKMGR_SDRPLL_VCO_OUTRSTALL_GET(value) (((value) & 0x01000000) >> 24) +/* Produces a ALT_CLKMGR_SDRPLL_VCO_OUTRSTALL register field value suitable for setting the register. */ +#define ALT_CLKMGR_SDRPLL_VCO_OUTRSTALL_SET(value) (((value) << 24) & 0x01000000) + +/* + * Field : Output Counter Reset - outreset + * + * Resets the individual PLL output counter. + * + * For software to change the PLL output counter without producing glitches on the + * respective clock, SW must set the VCO register respective Output Counter Reset + * bit. Software then polls the respective Output Counter Reset Acknowledge bit in + * the Output Counter Reset Ack Status Register. Software then writes the + * appropriate counter register, and then clears the respective VCO register Output + * Counter Reset bit. + * + * LSB 'outreset[0]' corresponds to PLL output clock C0, etc. + * + * If set to '1', reset output divider, no clock output from counter. + * + * If set to '0', counter is not reset. + * + * The reset value of this bit is applied on a cold reset; warm reset has no affect + * on this bit. + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_SDRPLL_VCO_OUTRST register field. */ +#define ALT_CLKMGR_SDRPLL_VCO_OUTRST_LSB 25 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_SDRPLL_VCO_OUTRST register field. */ +#define ALT_CLKMGR_SDRPLL_VCO_OUTRST_MSB 30 +/* The width in bits of the ALT_CLKMGR_SDRPLL_VCO_OUTRST register field. */ +#define ALT_CLKMGR_SDRPLL_VCO_OUTRST_WIDTH 6 +/* The mask used to set the ALT_CLKMGR_SDRPLL_VCO_OUTRST register field value. */ +#define ALT_CLKMGR_SDRPLL_VCO_OUTRST_SET_MSK 0x7e000000 +/* The mask used to clear the ALT_CLKMGR_SDRPLL_VCO_OUTRST register field value. */ +#define ALT_CLKMGR_SDRPLL_VCO_OUTRST_CLR_MSK 0x81ffffff +/* The reset value of the ALT_CLKMGR_SDRPLL_VCO_OUTRST register field. */ +#define ALT_CLKMGR_SDRPLL_VCO_OUTRST_RESET 0x0 +/* Extracts the ALT_CLKMGR_SDRPLL_VCO_OUTRST field value from a register. */ +#define ALT_CLKMGR_SDRPLL_VCO_OUTRST_GET(value) (((value) & 0x7e000000) >> 25) +/* Produces a ALT_CLKMGR_SDRPLL_VCO_OUTRST register field value suitable for setting the register. */ +#define ALT_CLKMGR_SDRPLL_VCO_OUTRST_SET(value) (((value) << 25) & 0x7e000000) + +/* + * Field : External Regulator Input Select - regextsel + * + * If set to '1', the external regulator is selected for the PLL. + * + * If set to '0', the internal regulator is slected. + * + * It is strongly recommended to select the external regulator while the PLL is not + * enabled (in reset), and then disable the external regulater once the PLL + * becomes enabled. Software should simulateously update the 'Enable' bit and the + * 'External Regulator Input Select' in the same write access to the VCO register. + * When the 'Enable' bit is clear, the 'External Regulator Input Select' should be + * set, and vice versa. + * + * The reset value of this bit is applied on a cold reset; warm reset has no affect + * on this bit. + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_SDRPLL_VCO_REGEXTSEL register field. */ +#define ALT_CLKMGR_SDRPLL_VCO_REGEXTSEL_LSB 31 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_SDRPLL_VCO_REGEXTSEL register field. */ +#define ALT_CLKMGR_SDRPLL_VCO_REGEXTSEL_MSB 31 +/* The width in bits of the ALT_CLKMGR_SDRPLL_VCO_REGEXTSEL register field. */ +#define ALT_CLKMGR_SDRPLL_VCO_REGEXTSEL_WIDTH 1 +/* The mask used to set the ALT_CLKMGR_SDRPLL_VCO_REGEXTSEL register field value. */ +#define ALT_CLKMGR_SDRPLL_VCO_REGEXTSEL_SET_MSK 0x80000000 +/* The mask used to clear the ALT_CLKMGR_SDRPLL_VCO_REGEXTSEL register field value. */ +#define ALT_CLKMGR_SDRPLL_VCO_REGEXTSEL_CLR_MSK 0x7fffffff +/* The reset value of the ALT_CLKMGR_SDRPLL_VCO_REGEXTSEL register field. */ +#define ALT_CLKMGR_SDRPLL_VCO_REGEXTSEL_RESET 0x1 +/* Extracts the ALT_CLKMGR_SDRPLL_VCO_REGEXTSEL field value from a register. */ +#define ALT_CLKMGR_SDRPLL_VCO_REGEXTSEL_GET(value) (((value) & 0x80000000) >> 31) +/* Produces a ALT_CLKMGR_SDRPLL_VCO_REGEXTSEL register field value suitable for setting the register. */ +#define ALT_CLKMGR_SDRPLL_VCO_REGEXTSEL_SET(value) (((value) << 31) & 0x80000000) + +#ifndef __ASSEMBLY__ +/* + * WARNING: The C register and register group struct declarations are provided for + * convenience and illustrative purposes. They should, however, be used with + * caution as the C language standard provides no guarantees about the alignment or + * atomicity of device memory accesses. The recommended practice for writing + * hardware drivers is to use the SoCAL access macros and alt_read_word() and + * alt_write_word() functions. + * + * The struct declaration for register ALT_CLKMGR_SDRPLL_VCO. + */ +struct ALT_CLKMGR_SDRPLL_VCO_s +{ + uint32_t bgpwrdn : 1; /* BG PWRDN */ + uint32_t en : 1; /* Enable */ + uint32_t pwrdn : 1; /* Power down */ + uint32_t numer : 13; /* Numerator (M) */ + uint32_t denom : 6; /* Denominator (N) */ + uint32_t ssrc : 2; /* Clock Source */ + uint32_t outresetall : 1; /* SDRAM All Output Counter Reset */ + uint32_t outreset : 6; /* Output Counter Reset */ + uint32_t regextsel : 1; /* External Regulator Input Select */ +}; + +/* The typedef declaration for register ALT_CLKMGR_SDRPLL_VCO. */ +typedef volatile struct ALT_CLKMGR_SDRPLL_VCO_s ALT_CLKMGR_SDRPLL_VCO_t; +#endif /* __ASSEMBLY__ */ + +/* The byte offset of the ALT_CLKMGR_SDRPLL_VCO register from the beginning of the component. */ +#define ALT_CLKMGR_SDRPLL_VCO_OFST 0x0 + +/* + * Register : SDRAM PLL VCO Advanced Control Register - ctrl + * + * Contains VCO control signals and other PLL control signals need to be + * controllable through register. + * + * Fields are only reset by a cold reset. + * + * Register Layout + * + * Bits | Access | Reset | Description + * :--------|:-------|:------|:------------------------------ + * [0] | RW | 0x0 | Loop Bandwidth Adjust Enabled + * [12:1] | RW | 0x1 | Loop Bandwidth Adjust + * [13] | RW | 0x0 | Fast Locking Enable + * [14] | RW | 0x1 | Saturation Enable + * [31:15] | ??? | 0x0 | *UNDEFINED* + * + */ +/* + * Field : Loop Bandwidth Adjust Enabled - bwadjen + * + * If set to 1, the Loop Bandwidth Adjust value comes from the Loop Bandwidth + * Adjust field. + * + * If set to 0, the Loop Bandwidth Adjust value equals the M field divided by 2 + * value of the VCO Control Register. The M divided by 2 is the upper 12 bits + * (12:1) of the M field in the VCO register. + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_SDRPLL_CTL_BWADJEN register field. */ +#define ALT_CLKMGR_SDRPLL_CTL_BWADJEN_LSB 0 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_SDRPLL_CTL_BWADJEN register field. */ +#define ALT_CLKMGR_SDRPLL_CTL_BWADJEN_MSB 0 +/* The width in bits of the ALT_CLKMGR_SDRPLL_CTL_BWADJEN register field. */ +#define ALT_CLKMGR_SDRPLL_CTL_BWADJEN_WIDTH 1 +/* The mask used to set the ALT_CLKMGR_SDRPLL_CTL_BWADJEN register field value. */ +#define ALT_CLKMGR_SDRPLL_CTL_BWADJEN_SET_MSK 0x00000001 +/* The mask used to clear the ALT_CLKMGR_SDRPLL_CTL_BWADJEN register field value. */ +#define ALT_CLKMGR_SDRPLL_CTL_BWADJEN_CLR_MSK 0xfffffffe +/* The reset value of the ALT_CLKMGR_SDRPLL_CTL_BWADJEN register field. */ +#define ALT_CLKMGR_SDRPLL_CTL_BWADJEN_RESET 0x0 +/* Extracts the ALT_CLKMGR_SDRPLL_CTL_BWADJEN field value from a register. */ +#define ALT_CLKMGR_SDRPLL_CTL_BWADJEN_GET(value) (((value) & 0x00000001) >> 0) +/* Produces a ALT_CLKMGR_SDRPLL_CTL_BWADJEN register field value suitable for setting the register. */ +#define ALT_CLKMGR_SDRPLL_CTL_BWADJEN_SET(value) (((value) << 0) & 0x00000001) + +/* + * Field : Loop Bandwidth Adjust - bwadj + * + * Provides Loop Bandwidth Adjust value. + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_SDRPLL_CTL_BWADJ register field. */ +#define ALT_CLKMGR_SDRPLL_CTL_BWADJ_LSB 1 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_SDRPLL_CTL_BWADJ register field. */ +#define ALT_CLKMGR_SDRPLL_CTL_BWADJ_MSB 12 +/* The width in bits of the ALT_CLKMGR_SDRPLL_CTL_BWADJ register field. */ +#define ALT_CLKMGR_SDRPLL_CTL_BWADJ_WIDTH 12 +/* The mask used to set the ALT_CLKMGR_SDRPLL_CTL_BWADJ register field value. */ +#define ALT_CLKMGR_SDRPLL_CTL_BWADJ_SET_MSK 0x00001ffe +/* The mask used to clear the ALT_CLKMGR_SDRPLL_CTL_BWADJ register field value. */ +#define ALT_CLKMGR_SDRPLL_CTL_BWADJ_CLR_MSK 0xffffe001 +/* The reset value of the ALT_CLKMGR_SDRPLL_CTL_BWADJ register field. */ +#define ALT_CLKMGR_SDRPLL_CTL_BWADJ_RESET 0x1 +/* Extracts the ALT_CLKMGR_SDRPLL_CTL_BWADJ field value from a register. */ +#define ALT_CLKMGR_SDRPLL_CTL_BWADJ_GET(value) (((value) & 0x00001ffe) >> 1) +/* Produces a ALT_CLKMGR_SDRPLL_CTL_BWADJ register field value suitable for setting the register. */ +#define ALT_CLKMGR_SDRPLL_CTL_BWADJ_SET(value) (((value) << 1) & 0x00001ffe) + +/* + * Field : Fast Locking Enable - fasten + * + * Enables fast locking circuit. + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_SDRPLL_CTL_FASTEN register field. */ +#define ALT_CLKMGR_SDRPLL_CTL_FASTEN_LSB 13 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_SDRPLL_CTL_FASTEN register field. */ +#define ALT_CLKMGR_SDRPLL_CTL_FASTEN_MSB 13 +/* The width in bits of the ALT_CLKMGR_SDRPLL_CTL_FASTEN register field. */ +#define ALT_CLKMGR_SDRPLL_CTL_FASTEN_WIDTH 1 +/* The mask used to set the ALT_CLKMGR_SDRPLL_CTL_FASTEN register field value. */ +#define ALT_CLKMGR_SDRPLL_CTL_FASTEN_SET_MSK 0x00002000 +/* The mask used to clear the ALT_CLKMGR_SDRPLL_CTL_FASTEN register field value. */ +#define ALT_CLKMGR_SDRPLL_CTL_FASTEN_CLR_MSK 0xffffdfff +/* The reset value of the ALT_CLKMGR_SDRPLL_CTL_FASTEN register field. */ +#define ALT_CLKMGR_SDRPLL_CTL_FASTEN_RESET 0x0 +/* Extracts the ALT_CLKMGR_SDRPLL_CTL_FASTEN field value from a register. */ +#define ALT_CLKMGR_SDRPLL_CTL_FASTEN_GET(value) (((value) & 0x00002000) >> 13) +/* Produces a ALT_CLKMGR_SDRPLL_CTL_FASTEN register field value suitable for setting the register. */ +#define ALT_CLKMGR_SDRPLL_CTL_FASTEN_SET(value) (((value) << 13) & 0x00002000) + +/* + * Field : Saturation Enable - saten + * + * Enables saturation behavior. + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_SDRPLL_CTL_SATEN register field. */ +#define ALT_CLKMGR_SDRPLL_CTL_SATEN_LSB 14 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_SDRPLL_CTL_SATEN register field. */ +#define ALT_CLKMGR_SDRPLL_CTL_SATEN_MSB 14 +/* The width in bits of the ALT_CLKMGR_SDRPLL_CTL_SATEN register field. */ +#define ALT_CLKMGR_SDRPLL_CTL_SATEN_WIDTH 1 +/* The mask used to set the ALT_CLKMGR_SDRPLL_CTL_SATEN register field value. */ +#define ALT_CLKMGR_SDRPLL_CTL_SATEN_SET_MSK 0x00004000 +/* The mask used to clear the ALT_CLKMGR_SDRPLL_CTL_SATEN register field value. */ +#define ALT_CLKMGR_SDRPLL_CTL_SATEN_CLR_MSK 0xffffbfff +/* The reset value of the ALT_CLKMGR_SDRPLL_CTL_SATEN register field. */ +#define ALT_CLKMGR_SDRPLL_CTL_SATEN_RESET 0x1 +/* Extracts the ALT_CLKMGR_SDRPLL_CTL_SATEN field value from a register. */ +#define ALT_CLKMGR_SDRPLL_CTL_SATEN_GET(value) (((value) & 0x00004000) >> 14) +/* Produces a ALT_CLKMGR_SDRPLL_CTL_SATEN register field value suitable for setting the register. */ +#define ALT_CLKMGR_SDRPLL_CTL_SATEN_SET(value) (((value) << 14) & 0x00004000) + +#ifndef __ASSEMBLY__ +/* + * WARNING: The C register and register group struct declarations are provided for + * convenience and illustrative purposes. They should, however, be used with + * caution as the C language standard provides no guarantees about the alignment or + * atomicity of device memory accesses. The recommended practice for writing + * hardware drivers is to use the SoCAL access macros and alt_read_word() and + * alt_write_word() functions. + * + * The struct declaration for register ALT_CLKMGR_SDRPLL_CTL. + */ +struct ALT_CLKMGR_SDRPLL_CTL_s +{ + uint32_t bwadjen : 1; /* Loop Bandwidth Adjust Enabled */ + uint32_t bwadj : 12; /* Loop Bandwidth Adjust */ + uint32_t fasten : 1; /* Fast Locking Enable */ + uint32_t saten : 1; /* Saturation Enable */ + uint32_t : 17; /* *UNDEFINED* */ +}; + +/* The typedef declaration for register ALT_CLKMGR_SDRPLL_CTL. */ +typedef volatile struct ALT_CLKMGR_SDRPLL_CTL_s ALT_CLKMGR_SDRPLL_CTL_t; +#endif /* __ASSEMBLY__ */ + +/* The byte offset of the ALT_CLKMGR_SDRPLL_CTL register from the beginning of the component. */ +#define ALT_CLKMGR_SDRPLL_CTL_OFST 0x4 + +/* + * Register : SDRAM PLL C0 Control Register for Clock ddr_dqs_clk - ddrdqsclk + * + * Contains settings that control clock ddr_dqs_clk generated from the C0 output of + * the SDRAM PLL. + * + * Fields are only reset by a cold reset. + * + * Register Layout + * + * Bits | Access | Reset | Description + * :--------|:-------|:------|:------------ + * [8:0] | RW | 0x1 | Counter + * [20:9] | RW | 0x0 | Phase Shift + * [31:21] | ??? | 0x0 | *UNDEFINED* + * + */ +/* + * Field : Counter - cnt + * + * Divides the VCO frequency by the value+1 in this field. + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_SDRPLL_DDRDQSCLK_CNT register field. */ +#define ALT_CLKMGR_SDRPLL_DDRDQSCLK_CNT_LSB 0 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_SDRPLL_DDRDQSCLK_CNT register field. */ +#define ALT_CLKMGR_SDRPLL_DDRDQSCLK_CNT_MSB 8 +/* The width in bits of the ALT_CLKMGR_SDRPLL_DDRDQSCLK_CNT register field. */ +#define ALT_CLKMGR_SDRPLL_DDRDQSCLK_CNT_WIDTH 9 +/* The mask used to set the ALT_CLKMGR_SDRPLL_DDRDQSCLK_CNT register field value. */ +#define ALT_CLKMGR_SDRPLL_DDRDQSCLK_CNT_SET_MSK 0x000001ff +/* The mask used to clear the ALT_CLKMGR_SDRPLL_DDRDQSCLK_CNT register field value. */ +#define ALT_CLKMGR_SDRPLL_DDRDQSCLK_CNT_CLR_MSK 0xfffffe00 +/* The reset value of the ALT_CLKMGR_SDRPLL_DDRDQSCLK_CNT register field. */ +#define ALT_CLKMGR_SDRPLL_DDRDQSCLK_CNT_RESET 0x1 +/* Extracts the ALT_CLKMGR_SDRPLL_DDRDQSCLK_CNT field value from a register. */ +#define ALT_CLKMGR_SDRPLL_DDRDQSCLK_CNT_GET(value) (((value) & 0x000001ff) >> 0) +/* Produces a ALT_CLKMGR_SDRPLL_DDRDQSCLK_CNT register field value suitable for setting the register. */ +#define ALT_CLKMGR_SDRPLL_DDRDQSCLK_CNT_SET(value) (((value) << 0) & 0x000001ff) + +/* + * Field : Phase Shift - phase + * + * Increment the phase of the VCO output by the value in this field multiplied by + * 45 degrees. The accumulated phase shift is the total shifted amount since the + * last assertion of the 'SDRAM All Output Divider Reset' bit in the SDRAM vco + * control register. In order to guarantee the phase shift to a known value, 'SDRAM + * clocks output phase align' bit should be asserted before programming this field. + * + * This field is only writeable by SW when it is zero. HW updates this field in + * real time as the phase adjustment is being made. SW may poll this field + * waiting for zero indicating the phase adjustment has completed by HW. + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_SDRPLL_DDRDQSCLK_PHASE register field. */ +#define ALT_CLKMGR_SDRPLL_DDRDQSCLK_PHASE_LSB 9 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_SDRPLL_DDRDQSCLK_PHASE register field. */ +#define ALT_CLKMGR_SDRPLL_DDRDQSCLK_PHASE_MSB 20 +/* The width in bits of the ALT_CLKMGR_SDRPLL_DDRDQSCLK_PHASE register field. */ +#define ALT_CLKMGR_SDRPLL_DDRDQSCLK_PHASE_WIDTH 12 +/* The mask used to set the ALT_CLKMGR_SDRPLL_DDRDQSCLK_PHASE register field value. */ +#define ALT_CLKMGR_SDRPLL_DDRDQSCLK_PHASE_SET_MSK 0x001ffe00 +/* The mask used to clear the ALT_CLKMGR_SDRPLL_DDRDQSCLK_PHASE register field value. */ +#define ALT_CLKMGR_SDRPLL_DDRDQSCLK_PHASE_CLR_MSK 0xffe001ff +/* The reset value of the ALT_CLKMGR_SDRPLL_DDRDQSCLK_PHASE register field. */ +#define ALT_CLKMGR_SDRPLL_DDRDQSCLK_PHASE_RESET 0x0 +/* Extracts the ALT_CLKMGR_SDRPLL_DDRDQSCLK_PHASE field value from a register. */ +#define ALT_CLKMGR_SDRPLL_DDRDQSCLK_PHASE_GET(value) (((value) & 0x001ffe00) >> 9) +/* Produces a ALT_CLKMGR_SDRPLL_DDRDQSCLK_PHASE register field value suitable for setting the register. */ +#define ALT_CLKMGR_SDRPLL_DDRDQSCLK_PHASE_SET(value) (((value) << 9) & 0x001ffe00) + +#ifndef __ASSEMBLY__ +/* + * WARNING: The C register and register group struct declarations are provided for + * convenience and illustrative purposes. They should, however, be used with + * caution as the C language standard provides no guarantees about the alignment or + * atomicity of device memory accesses. The recommended practice for writing + * hardware drivers is to use the SoCAL access macros and alt_read_word() and + * alt_write_word() functions. + * + * The struct declaration for register ALT_CLKMGR_SDRPLL_DDRDQSCLK. + */ +struct ALT_CLKMGR_SDRPLL_DDRDQSCLK_s +{ + uint32_t cnt : 9; /* Counter */ + uint32_t phase : 12; /* Phase Shift */ + uint32_t : 11; /* *UNDEFINED* */ +}; + +/* The typedef declaration for register ALT_CLKMGR_SDRPLL_DDRDQSCLK. */ +typedef volatile struct ALT_CLKMGR_SDRPLL_DDRDQSCLK_s ALT_CLKMGR_SDRPLL_DDRDQSCLK_t; +#endif /* __ASSEMBLY__ */ + +/* The byte offset of the ALT_CLKMGR_SDRPLL_DDRDQSCLK register from the beginning of the component. */ +#define ALT_CLKMGR_SDRPLL_DDRDQSCLK_OFST 0x8 + +/* + * Register : SDRAM PLL C1 Control Register for Clock ddr_2x_dqs_clk - ddr2xdqsclk + * + * Contains settings that control clock ddr_2x_dqs_clk generated from the C1 output + * of the SDRAM PLL. + * + * Fields are only reset by a cold reset. + * + * Register Layout + * + * Bits | Access | Reset | Description + * :--------|:-------|:------|:------------ + * [8:0] | RW | 0x1 | Counter + * [20:9] | RW | 0x0 | Phase Shift + * [31:21] | ??? | 0x0 | *UNDEFINED* + * + */ +/* + * Field : Counter - cnt + * + * Divides the VCO frequency by the value+1 in this field. + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_SDRPLL_DDR2XDQSCLK_CNT register field. */ +#define ALT_CLKMGR_SDRPLL_DDR2XDQSCLK_CNT_LSB 0 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_SDRPLL_DDR2XDQSCLK_CNT register field. */ +#define ALT_CLKMGR_SDRPLL_DDR2XDQSCLK_CNT_MSB 8 +/* The width in bits of the ALT_CLKMGR_SDRPLL_DDR2XDQSCLK_CNT register field. */ +#define ALT_CLKMGR_SDRPLL_DDR2XDQSCLK_CNT_WIDTH 9 +/* The mask used to set the ALT_CLKMGR_SDRPLL_DDR2XDQSCLK_CNT register field value. */ +#define ALT_CLKMGR_SDRPLL_DDR2XDQSCLK_CNT_SET_MSK 0x000001ff +/* The mask used to clear the ALT_CLKMGR_SDRPLL_DDR2XDQSCLK_CNT register field value. */ +#define ALT_CLKMGR_SDRPLL_DDR2XDQSCLK_CNT_CLR_MSK 0xfffffe00 +/* The reset value of the ALT_CLKMGR_SDRPLL_DDR2XDQSCLK_CNT register field. */ +#define ALT_CLKMGR_SDRPLL_DDR2XDQSCLK_CNT_RESET 0x1 +/* Extracts the ALT_CLKMGR_SDRPLL_DDR2XDQSCLK_CNT field value from a register. */ +#define ALT_CLKMGR_SDRPLL_DDR2XDQSCLK_CNT_GET(value) (((value) & 0x000001ff) >> 0) +/* Produces a ALT_CLKMGR_SDRPLL_DDR2XDQSCLK_CNT register field value suitable for setting the register. */ +#define ALT_CLKMGR_SDRPLL_DDR2XDQSCLK_CNT_SET(value) (((value) << 0) & 0x000001ff) + +/* + * Field : Phase Shift - phase + * + * Increment the phase of the VCO output by the value in this field multiplied by + * 45 degrees. The accumulated phase shift is the total shifted amount since the + * last assertion of the 'SDRAM All Output Divider Reset' bit in the SDRAM vco + * control register. In order to guarantee the phase shift to a known value, 'SDRAM + * clocks output phase align' bit should be asserted before programming this field. + * + * This field is only writeable by SW when it is zero. HW updates this field in + * real time as the phase adjustment is being made. SW may poll this field + * waiting for zero indicating the phase adjustment has completed by HW. + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_SDRPLL_DDR2XDQSCLK_PHASE register field. */ +#define ALT_CLKMGR_SDRPLL_DDR2XDQSCLK_PHASE_LSB 9 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_SDRPLL_DDR2XDQSCLK_PHASE register field. */ +#define ALT_CLKMGR_SDRPLL_DDR2XDQSCLK_PHASE_MSB 20 +/* The width in bits of the ALT_CLKMGR_SDRPLL_DDR2XDQSCLK_PHASE register field. */ +#define ALT_CLKMGR_SDRPLL_DDR2XDQSCLK_PHASE_WIDTH 12 +/* The mask used to set the ALT_CLKMGR_SDRPLL_DDR2XDQSCLK_PHASE register field value. */ +#define ALT_CLKMGR_SDRPLL_DDR2XDQSCLK_PHASE_SET_MSK 0x001ffe00 +/* The mask used to clear the ALT_CLKMGR_SDRPLL_DDR2XDQSCLK_PHASE register field value. */ +#define ALT_CLKMGR_SDRPLL_DDR2XDQSCLK_PHASE_CLR_MSK 0xffe001ff +/* The reset value of the ALT_CLKMGR_SDRPLL_DDR2XDQSCLK_PHASE register field. */ +#define ALT_CLKMGR_SDRPLL_DDR2XDQSCLK_PHASE_RESET 0x0 +/* Extracts the ALT_CLKMGR_SDRPLL_DDR2XDQSCLK_PHASE field value from a register. */ +#define ALT_CLKMGR_SDRPLL_DDR2XDQSCLK_PHASE_GET(value) (((value) & 0x001ffe00) >> 9) +/* Produces a ALT_CLKMGR_SDRPLL_DDR2XDQSCLK_PHASE register field value suitable for setting the register. */ +#define ALT_CLKMGR_SDRPLL_DDR2XDQSCLK_PHASE_SET(value) (((value) << 9) & 0x001ffe00) + +#ifndef __ASSEMBLY__ +/* + * WARNING: The C register and register group struct declarations are provided for + * convenience and illustrative purposes. They should, however, be used with + * caution as the C language standard provides no guarantees about the alignment or + * atomicity of device memory accesses. The recommended practice for writing + * hardware drivers is to use the SoCAL access macros and alt_read_word() and + * alt_write_word() functions. + * + * The struct declaration for register ALT_CLKMGR_SDRPLL_DDR2XDQSCLK. + */ +struct ALT_CLKMGR_SDRPLL_DDR2XDQSCLK_s +{ + uint32_t cnt : 9; /* Counter */ + uint32_t phase : 12; /* Phase Shift */ + uint32_t : 11; /* *UNDEFINED* */ +}; + +/* The typedef declaration for register ALT_CLKMGR_SDRPLL_DDR2XDQSCLK. */ +typedef volatile struct ALT_CLKMGR_SDRPLL_DDR2XDQSCLK_s ALT_CLKMGR_SDRPLL_DDR2XDQSCLK_t; +#endif /* __ASSEMBLY__ */ + +/* The byte offset of the ALT_CLKMGR_SDRPLL_DDR2XDQSCLK register from the beginning of the component. */ +#define ALT_CLKMGR_SDRPLL_DDR2XDQSCLK_OFST 0xc + +/* + * Register : SDRAM PLL C2 Control Register for Clock ddr_dq_clk - ddrdqclk + * + * Contains settings that control clock ddr_dq_clk generated from the C2 output of + * the SDRAM PLL. + * + * Fields are only reset by a cold reset. + * + * Register Layout + * + * Bits | Access | Reset | Description + * :--------|:-------|:------|:------------ + * [8:0] | RW | 0x1 | Counter + * [20:9] | RW | 0x0 | Phase Shift + * [31:21] | ??? | 0x0 | *UNDEFINED* + * + */ +/* + * Field : Counter - cnt + * + * Divides the VCO frequency by the value+1 in this field. + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_SDRPLL_DDRDQCLK_CNT register field. */ +#define ALT_CLKMGR_SDRPLL_DDRDQCLK_CNT_LSB 0 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_SDRPLL_DDRDQCLK_CNT register field. */ +#define ALT_CLKMGR_SDRPLL_DDRDQCLK_CNT_MSB 8 +/* The width in bits of the ALT_CLKMGR_SDRPLL_DDRDQCLK_CNT register field. */ +#define ALT_CLKMGR_SDRPLL_DDRDQCLK_CNT_WIDTH 9 +/* The mask used to set the ALT_CLKMGR_SDRPLL_DDRDQCLK_CNT register field value. */ +#define ALT_CLKMGR_SDRPLL_DDRDQCLK_CNT_SET_MSK 0x000001ff +/* The mask used to clear the ALT_CLKMGR_SDRPLL_DDRDQCLK_CNT register field value. */ +#define ALT_CLKMGR_SDRPLL_DDRDQCLK_CNT_CLR_MSK 0xfffffe00 +/* The reset value of the ALT_CLKMGR_SDRPLL_DDRDQCLK_CNT register field. */ +#define ALT_CLKMGR_SDRPLL_DDRDQCLK_CNT_RESET 0x1 +/* Extracts the ALT_CLKMGR_SDRPLL_DDRDQCLK_CNT field value from a register. */ +#define ALT_CLKMGR_SDRPLL_DDRDQCLK_CNT_GET(value) (((value) & 0x000001ff) >> 0) +/* Produces a ALT_CLKMGR_SDRPLL_DDRDQCLK_CNT register field value suitable for setting the register. */ +#define ALT_CLKMGR_SDRPLL_DDRDQCLK_CNT_SET(value) (((value) << 0) & 0x000001ff) + +/* + * Field : Phase Shift - phase + * + * Increment the phase of the VCO output by the value in this field multiplied by + * 45 degrees. The accumulated phase shift is the total shifted amount since the + * last assertion of the 'SDRAM All Output Divider Reset' bit in the SDRAM vco + * control register. In order to guarantee the phase shift to a known value, 'SDRAM + * clocks output phase align' bit should be asserted before programming this field. + * + * This field is only writeable by SW when it is zero. HW updates this field in + * real time as the phase adjustment is being made. SW may poll this field + * waiting for zero indicating the phase adjustment has completed by HW. + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_SDRPLL_DDRDQCLK_PHASE register field. */ +#define ALT_CLKMGR_SDRPLL_DDRDQCLK_PHASE_LSB 9 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_SDRPLL_DDRDQCLK_PHASE register field. */ +#define ALT_CLKMGR_SDRPLL_DDRDQCLK_PHASE_MSB 20 +/* The width in bits of the ALT_CLKMGR_SDRPLL_DDRDQCLK_PHASE register field. */ +#define ALT_CLKMGR_SDRPLL_DDRDQCLK_PHASE_WIDTH 12 +/* The mask used to set the ALT_CLKMGR_SDRPLL_DDRDQCLK_PHASE register field value. */ +#define ALT_CLKMGR_SDRPLL_DDRDQCLK_PHASE_SET_MSK 0x001ffe00 +/* The mask used to clear the ALT_CLKMGR_SDRPLL_DDRDQCLK_PHASE register field value. */ +#define ALT_CLKMGR_SDRPLL_DDRDQCLK_PHASE_CLR_MSK 0xffe001ff +/* The reset value of the ALT_CLKMGR_SDRPLL_DDRDQCLK_PHASE register field. */ +#define ALT_CLKMGR_SDRPLL_DDRDQCLK_PHASE_RESET 0x0 +/* Extracts the ALT_CLKMGR_SDRPLL_DDRDQCLK_PHASE field value from a register. */ +#define ALT_CLKMGR_SDRPLL_DDRDQCLK_PHASE_GET(value) (((value) & 0x001ffe00) >> 9) +/* Produces a ALT_CLKMGR_SDRPLL_DDRDQCLK_PHASE register field value suitable for setting the register. */ +#define ALT_CLKMGR_SDRPLL_DDRDQCLK_PHASE_SET(value) (((value) << 9) & 0x001ffe00) + +#ifndef __ASSEMBLY__ +/* + * WARNING: The C register and register group struct declarations are provided for + * convenience and illustrative purposes. They should, however, be used with + * caution as the C language standard provides no guarantees about the alignment or + * atomicity of device memory accesses. The recommended practice for writing + * hardware drivers is to use the SoCAL access macros and alt_read_word() and + * alt_write_word() functions. + * + * The struct declaration for register ALT_CLKMGR_SDRPLL_DDRDQCLK. + */ +struct ALT_CLKMGR_SDRPLL_DDRDQCLK_s +{ + uint32_t cnt : 9; /* Counter */ + uint32_t phase : 12; /* Phase Shift */ + uint32_t : 11; /* *UNDEFINED* */ +}; + +/* The typedef declaration for register ALT_CLKMGR_SDRPLL_DDRDQCLK. */ +typedef volatile struct ALT_CLKMGR_SDRPLL_DDRDQCLK_s ALT_CLKMGR_SDRPLL_DDRDQCLK_t; +#endif /* __ASSEMBLY__ */ + +/* The byte offset of the ALT_CLKMGR_SDRPLL_DDRDQCLK register from the beginning of the component. */ +#define ALT_CLKMGR_SDRPLL_DDRDQCLK_OFST 0x10 + +/* + * Register : SDRAM PLL C5 Control Register for Clock s2f_user2_clk - s2fuser2clk + * + * Contains settings that control clock s2f_user2_clk generated from the C5 output + * of the SDRAM PLL. + * + * Qsys and user documenation refer to s2f_user2_clk as h2f_user2_clk + * + * Fields are only reset by a cold reset. + * + * Register Layout + * + * Bits | Access | Reset | Description + * :--------|:-------|:------|:------------ + * [8:0] | RW | 0x1 | Counter + * [20:9] | RW | 0x0 | Phase Shift + * [31:21] | ??? | 0x0 | *UNDEFINED* + * + */ +/* + * Field : Counter - cnt + * + * Divides the VCO frequency by the value+1 in this field. + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_SDRPLL_S2FUSER2CLK_CNT register field. */ +#define ALT_CLKMGR_SDRPLL_S2FUSER2CLK_CNT_LSB 0 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_SDRPLL_S2FUSER2CLK_CNT register field. */ +#define ALT_CLKMGR_SDRPLL_S2FUSER2CLK_CNT_MSB 8 +/* The width in bits of the ALT_CLKMGR_SDRPLL_S2FUSER2CLK_CNT register field. */ +#define ALT_CLKMGR_SDRPLL_S2FUSER2CLK_CNT_WIDTH 9 +/* The mask used to set the ALT_CLKMGR_SDRPLL_S2FUSER2CLK_CNT register field value. */ +#define ALT_CLKMGR_SDRPLL_S2FUSER2CLK_CNT_SET_MSK 0x000001ff +/* The mask used to clear the ALT_CLKMGR_SDRPLL_S2FUSER2CLK_CNT register field value. */ +#define ALT_CLKMGR_SDRPLL_S2FUSER2CLK_CNT_CLR_MSK 0xfffffe00 +/* The reset value of the ALT_CLKMGR_SDRPLL_S2FUSER2CLK_CNT register field. */ +#define ALT_CLKMGR_SDRPLL_S2FUSER2CLK_CNT_RESET 0x1 +/* Extracts the ALT_CLKMGR_SDRPLL_S2FUSER2CLK_CNT field value from a register. */ +#define ALT_CLKMGR_SDRPLL_S2FUSER2CLK_CNT_GET(value) (((value) & 0x000001ff) >> 0) +/* Produces a ALT_CLKMGR_SDRPLL_S2FUSER2CLK_CNT register field value suitable for setting the register. */ +#define ALT_CLKMGR_SDRPLL_S2FUSER2CLK_CNT_SET(value) (((value) << 0) & 0x000001ff) + +/* + * Field : Phase Shift - phase + * + * Increment the phase of the VCO output by the value in this field multiplied by + * 45 degrees. The accumulated phase shift is the total shifted amount since the + * last assertion of the 'SDRAM All Output Divider Reset' bit in the SDRAM vco + * control register. In order to guarantee the phase shift to a known value, 'SDRAM + * clocks output phase align' bit should be asserted before programming this field. + * + * This field is only writeable by SW when it is zero. HW updates this field in + * real time as the phase adjustment is being made. SW may poll this field + * waiting for zero indicating the phase adjustment has completed by HW. + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_SDRPLL_S2FUSER2CLK_PHASE register field. */ +#define ALT_CLKMGR_SDRPLL_S2FUSER2CLK_PHASE_LSB 9 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_SDRPLL_S2FUSER2CLK_PHASE register field. */ +#define ALT_CLKMGR_SDRPLL_S2FUSER2CLK_PHASE_MSB 20 +/* The width in bits of the ALT_CLKMGR_SDRPLL_S2FUSER2CLK_PHASE register field. */ +#define ALT_CLKMGR_SDRPLL_S2FUSER2CLK_PHASE_WIDTH 12 +/* The mask used to set the ALT_CLKMGR_SDRPLL_S2FUSER2CLK_PHASE register field value. */ +#define ALT_CLKMGR_SDRPLL_S2FUSER2CLK_PHASE_SET_MSK 0x001ffe00 +/* The mask used to clear the ALT_CLKMGR_SDRPLL_S2FUSER2CLK_PHASE register field value. */ +#define ALT_CLKMGR_SDRPLL_S2FUSER2CLK_PHASE_CLR_MSK 0xffe001ff +/* The reset value of the ALT_CLKMGR_SDRPLL_S2FUSER2CLK_PHASE register field. */ +#define ALT_CLKMGR_SDRPLL_S2FUSER2CLK_PHASE_RESET 0x0 +/* Extracts the ALT_CLKMGR_SDRPLL_S2FUSER2CLK_PHASE field value from a register. */ +#define ALT_CLKMGR_SDRPLL_S2FUSER2CLK_PHASE_GET(value) (((value) & 0x001ffe00) >> 9) +/* Produces a ALT_CLKMGR_SDRPLL_S2FUSER2CLK_PHASE register field value suitable for setting the register. */ +#define ALT_CLKMGR_SDRPLL_S2FUSER2CLK_PHASE_SET(value) (((value) << 9) & 0x001ffe00) + +#ifndef __ASSEMBLY__ +/* + * WARNING: The C register and register group struct declarations are provided for + * convenience and illustrative purposes. They should, however, be used with + * caution as the C language standard provides no guarantees about the alignment or + * atomicity of device memory accesses. The recommended practice for writing + * hardware drivers is to use the SoCAL access macros and alt_read_word() and + * alt_write_word() functions. + * + * The struct declaration for register ALT_CLKMGR_SDRPLL_S2FUSER2CLK. + */ +struct ALT_CLKMGR_SDRPLL_S2FUSER2CLK_s +{ + uint32_t cnt : 9; /* Counter */ + uint32_t phase : 12; /* Phase Shift */ + uint32_t : 11; /* *UNDEFINED* */ +}; + +/* The typedef declaration for register ALT_CLKMGR_SDRPLL_S2FUSER2CLK. */ +typedef volatile struct ALT_CLKMGR_SDRPLL_S2FUSER2CLK_s ALT_CLKMGR_SDRPLL_S2FUSER2CLK_t; +#endif /* __ASSEMBLY__ */ + +/* The byte offset of the ALT_CLKMGR_SDRPLL_S2FUSER2CLK register from the beginning of the component. */ +#define ALT_CLKMGR_SDRPLL_S2FUSER2CLK_OFST 0x14 + +/* + * Register : Enable Register - en + * + * Contains fields that control the SDRAM Clock Group enables generated from the + * SDRAM PLL clock outputs. + * + * 1: The clock is enabled. + * + * 0: The clock is disabled. + * + * Fields are only reset by a cold reset. + * + * Register Layout + * + * Bits | Access | Reset | Description + * :-------|:-------|:------|:---------------------- + * [0] | RW | 0x1 | ddr_dqs_clk Enable + * [1] | RW | 0x1 | ddr_2x_dqs_clk Enable + * [2] | RW | 0x1 | ddr_dq_clk Enable + * [3] | RW | 0x1 | s2f_user2_clk Enable + * [31:4] | ??? | 0x0 | *UNDEFINED* + * + */ +/* + * Field : ddr_dqs_clk Enable - ddrdqsclk + * + * Enables clock ddr_dqs_clk output + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_SDRPLL_EN_DDRDQSCLK register field. */ +#define ALT_CLKMGR_SDRPLL_EN_DDRDQSCLK_LSB 0 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_SDRPLL_EN_DDRDQSCLK register field. */ +#define ALT_CLKMGR_SDRPLL_EN_DDRDQSCLK_MSB 0 +/* The width in bits of the ALT_CLKMGR_SDRPLL_EN_DDRDQSCLK register field. */ +#define ALT_CLKMGR_SDRPLL_EN_DDRDQSCLK_WIDTH 1 +/* The mask used to set the ALT_CLKMGR_SDRPLL_EN_DDRDQSCLK register field value. */ +#define ALT_CLKMGR_SDRPLL_EN_DDRDQSCLK_SET_MSK 0x00000001 +/* The mask used to clear the ALT_CLKMGR_SDRPLL_EN_DDRDQSCLK register field value. */ +#define ALT_CLKMGR_SDRPLL_EN_DDRDQSCLK_CLR_MSK 0xfffffffe +/* The reset value of the ALT_CLKMGR_SDRPLL_EN_DDRDQSCLK register field. */ +#define ALT_CLKMGR_SDRPLL_EN_DDRDQSCLK_RESET 0x1 +/* Extracts the ALT_CLKMGR_SDRPLL_EN_DDRDQSCLK field value from a register. */ +#define ALT_CLKMGR_SDRPLL_EN_DDRDQSCLK_GET(value) (((value) & 0x00000001) >> 0) +/* Produces a ALT_CLKMGR_SDRPLL_EN_DDRDQSCLK register field value suitable for setting the register. */ +#define ALT_CLKMGR_SDRPLL_EN_DDRDQSCLK_SET(value) (((value) << 0) & 0x00000001) + +/* + * Field : ddr_2x_dqs_clk Enable - ddr2xdqsclk + * + * Enables clock ddr_2x_dqs_clk output + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_SDRPLL_EN_DDR2XDQSCLK register field. */ +#define ALT_CLKMGR_SDRPLL_EN_DDR2XDQSCLK_LSB 1 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_SDRPLL_EN_DDR2XDQSCLK register field. */ +#define ALT_CLKMGR_SDRPLL_EN_DDR2XDQSCLK_MSB 1 +/* The width in bits of the ALT_CLKMGR_SDRPLL_EN_DDR2XDQSCLK register field. */ +#define ALT_CLKMGR_SDRPLL_EN_DDR2XDQSCLK_WIDTH 1 +/* The mask used to set the ALT_CLKMGR_SDRPLL_EN_DDR2XDQSCLK register field value. */ +#define ALT_CLKMGR_SDRPLL_EN_DDR2XDQSCLK_SET_MSK 0x00000002 +/* The mask used to clear the ALT_CLKMGR_SDRPLL_EN_DDR2XDQSCLK register field value. */ +#define ALT_CLKMGR_SDRPLL_EN_DDR2XDQSCLK_CLR_MSK 0xfffffffd +/* The reset value of the ALT_CLKMGR_SDRPLL_EN_DDR2XDQSCLK register field. */ +#define ALT_CLKMGR_SDRPLL_EN_DDR2XDQSCLK_RESET 0x1 +/* Extracts the ALT_CLKMGR_SDRPLL_EN_DDR2XDQSCLK field value from a register. */ +#define ALT_CLKMGR_SDRPLL_EN_DDR2XDQSCLK_GET(value) (((value) & 0x00000002) >> 1) +/* Produces a ALT_CLKMGR_SDRPLL_EN_DDR2XDQSCLK register field value suitable for setting the register. */ +#define ALT_CLKMGR_SDRPLL_EN_DDR2XDQSCLK_SET(value) (((value) << 1) & 0x00000002) + +/* + * Field : ddr_dq_clk Enable - ddrdqclk + * + * Enables clock ddr_dq_clk output + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_SDRPLL_EN_DDRDQCLK register field. */ +#define ALT_CLKMGR_SDRPLL_EN_DDRDQCLK_LSB 2 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_SDRPLL_EN_DDRDQCLK register field. */ +#define ALT_CLKMGR_SDRPLL_EN_DDRDQCLK_MSB 2 +/* The width in bits of the ALT_CLKMGR_SDRPLL_EN_DDRDQCLK register field. */ +#define ALT_CLKMGR_SDRPLL_EN_DDRDQCLK_WIDTH 1 +/* The mask used to set the ALT_CLKMGR_SDRPLL_EN_DDRDQCLK register field value. */ +#define ALT_CLKMGR_SDRPLL_EN_DDRDQCLK_SET_MSK 0x00000004 +/* The mask used to clear the ALT_CLKMGR_SDRPLL_EN_DDRDQCLK register field value. */ +#define ALT_CLKMGR_SDRPLL_EN_DDRDQCLK_CLR_MSK 0xfffffffb +/* The reset value of the ALT_CLKMGR_SDRPLL_EN_DDRDQCLK register field. */ +#define ALT_CLKMGR_SDRPLL_EN_DDRDQCLK_RESET 0x1 +/* Extracts the ALT_CLKMGR_SDRPLL_EN_DDRDQCLK field value from a register. */ +#define ALT_CLKMGR_SDRPLL_EN_DDRDQCLK_GET(value) (((value) & 0x00000004) >> 2) +/* Produces a ALT_CLKMGR_SDRPLL_EN_DDRDQCLK register field value suitable for setting the register. */ +#define ALT_CLKMGR_SDRPLL_EN_DDRDQCLK_SET(value) (((value) << 2) & 0x00000004) + +/* + * Field : s2f_user2_clk Enable - s2fuser2clk + * + * Enables clock s2f_user2_clk output. + * + * Qsys and user documenation refer to s2f_user2_clk as h2f_user2_clk. + * + * Field Access Macros: + * + */ +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_SDRPLL_EN_S2FUSER2CLK register field. */ +#define ALT_CLKMGR_SDRPLL_EN_S2FUSER2CLK_LSB 3 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_SDRPLL_EN_S2FUSER2CLK register field. */ +#define ALT_CLKMGR_SDRPLL_EN_S2FUSER2CLK_MSB 3 +/* The width in bits of the ALT_CLKMGR_SDRPLL_EN_S2FUSER2CLK register field. */ +#define ALT_CLKMGR_SDRPLL_EN_S2FUSER2CLK_WIDTH 1 +/* The mask used to set the ALT_CLKMGR_SDRPLL_EN_S2FUSER2CLK register field value. */ +#define ALT_CLKMGR_SDRPLL_EN_S2FUSER2CLK_SET_MSK 0x00000008 +/* The mask used to clear the ALT_CLKMGR_SDRPLL_EN_S2FUSER2CLK register field value. */ +#define ALT_CLKMGR_SDRPLL_EN_S2FUSER2CLK_CLR_MSK 0xfffffff7 +/* The reset value of the ALT_CLKMGR_SDRPLL_EN_S2FUSER2CLK register field. */ +#define ALT_CLKMGR_SDRPLL_EN_S2FUSER2CLK_RESET 0x1 +/* Extracts the ALT_CLKMGR_SDRPLL_EN_S2FUSER2CLK field value from a register. */ +#define ALT_CLKMGR_SDRPLL_EN_S2FUSER2CLK_GET(value) (((value) & 0x00000008) >> 3) +/* Produces a ALT_CLKMGR_SDRPLL_EN_S2FUSER2CLK register field value suitable for setting the register. */ +#define ALT_CLKMGR_SDRPLL_EN_S2FUSER2CLK_SET(value) (((value) << 3) & 0x00000008) + +#ifndef __ASSEMBLY__ +/* + * WARNING: The C register and register group struct declarations are provided for + * convenience and illustrative purposes. They should, however, be used with + * caution as the C language standard provides no guarantees about the alignment or + * atomicity of device memory accesses. The recommended practice for writing + * hardware drivers is to use the SoCAL access macros and alt_read_word() and + * alt_write_word() functions. + * + * The struct declaration for register ALT_CLKMGR_SDRPLL_EN. + */ +struct ALT_CLKMGR_SDRPLL_EN_s +{ + uint32_t ddrdqsclk : 1; /* ddr_dqs_clk Enable */ + uint32_t ddr2xdqsclk : 1; /* ddr_2x_dqs_clk Enable */ + uint32_t ddrdqclk : 1; /* ddr_dq_clk Enable */ + uint32_t s2fuser2clk : 1; /* s2f_user2_clk Enable */ + uint32_t : 28; /* *UNDEFINED* */ +}; + +/* The typedef declaration for register ALT_CLKMGR_SDRPLL_EN. */ +typedef volatile struct ALT_CLKMGR_SDRPLL_EN_s ALT_CLKMGR_SDRPLL_EN_t; +#endif /* __ASSEMBLY__ */ + +/* The byte offset of the ALT_CLKMGR_SDRPLL_EN register from the beginning of the component. */ +#define ALT_CLKMGR_SDRPLL_EN_OFST 0x18 + +/* + * Register : SDRAM PLL Output Counter Reset Ack Status Register - stat + * + * Contains Output Clock Counter Reset acknowledge status. + * + * Register Layout + * + * Bits | Access | Reset | Description + * :-------|:-------|:------|:--------------------------------- + * [5:0] | R | 0x0 | Output Counter Reset Acknowledge + * [31:6] | ??? | 0x0 | *UNDEFINED* + * + */ +/* + * Field : Output Counter Reset Acknowledge - outresetack + * + * These read only bits per PLL output indicate that the PLL has received the + * Output Reset Counter request and has gracefully stopped the respective PLL + * output clock. + * + * For software to change the PLL output counter without producing glitches on the + * respective clock, SW must set the VCO register respective Output Counter Reset + * bit. Software then polls the respective Output Counter Reset Acknowledge bit in + * the Output Counter Reset Ack Status Register. Software then writes the + * appropriate counter register, and then clears the respective VCO register Output + * Counter Reset bit. + * + * The reset value of this bit is applied on a cold reset; warm reset has no affect + * on this bit. + * + * Field Enumeration Values: + * + * Enum | Value | Description + * :-------------------------------------------|:------|:------------------------------------- + * ALT_CLKMGR_SDRPLL_STAT_OUTRSTACK_E_IDLE | 0x0 | Idle + * ALT_CLKMGR_SDRPLL_STAT_OUTRSTACK_E_ACK_RXD | 0x1 | Output Counter Acknowledge received. + * + * Field Access Macros: + * + */ +/* + * Enumerated value for register field ALT_CLKMGR_SDRPLL_STAT_OUTRSTACK + * + * Idle + */ +#define ALT_CLKMGR_SDRPLL_STAT_OUTRSTACK_E_IDLE 0x0 +/* + * Enumerated value for register field ALT_CLKMGR_SDRPLL_STAT_OUTRSTACK + * + * Output Counter Acknowledge received. + */ +#define ALT_CLKMGR_SDRPLL_STAT_OUTRSTACK_E_ACK_RXD 0x1 + +/* The Least Significant Bit (LSB) position of the ALT_CLKMGR_SDRPLL_STAT_OUTRSTACK register field. */ +#define ALT_CLKMGR_SDRPLL_STAT_OUTRSTACK_LSB 0 +/* The Most Significant Bit (MSB) position of the ALT_CLKMGR_SDRPLL_STAT_OUTRSTACK register field. */ +#define ALT_CLKMGR_SDRPLL_STAT_OUTRSTACK_MSB 5 +/* The width in bits of the ALT_CLKMGR_SDRPLL_STAT_OUTRSTACK register field. */ +#define ALT_CLKMGR_SDRPLL_STAT_OUTRSTACK_WIDTH 6 +/* The mask used to set the ALT_CLKMGR_SDRPLL_STAT_OUTRSTACK register field value. */ +#define ALT_CLKMGR_SDRPLL_STAT_OUTRSTACK_SET_MSK 0x0000003f +/* The mask used to clear the ALT_CLKMGR_SDRPLL_STAT_OUTRSTACK register field value. */ +#define ALT_CLKMGR_SDRPLL_STAT_OUTRSTACK_CLR_MSK 0xffffffc0 +/* The reset value of the ALT_CLKMGR_SDRPLL_STAT_OUTRSTACK register field. */ +#define ALT_CLKMGR_SDRPLL_STAT_OUTRSTACK_RESET 0x0 +/* Extracts the ALT_CLKMGR_SDRPLL_STAT_OUTRSTACK field value from a register. */ +#define ALT_CLKMGR_SDRPLL_STAT_OUTRSTACK_GET(value) (((value) & 0x0000003f) >> 0) +/* Produces a ALT_CLKMGR_SDRPLL_STAT_OUTRSTACK register field value suitable for setting the register. */ +#define ALT_CLKMGR_SDRPLL_STAT_OUTRSTACK_SET(value) (((value) << 0) & 0x0000003f) + +#ifndef __ASSEMBLY__ +/* + * WARNING: The C register and register group struct declarations are provided for + * convenience and illustrative purposes. They should, however, be used with + * caution as the C language standard provides no guarantees about the alignment or + * atomicity of device memory accesses. The recommended practice for writing + * hardware drivers is to use the SoCAL access macros and alt_read_word() and + * alt_write_word() functions. + * + * The struct declaration for register ALT_CLKMGR_SDRPLL_STAT. + */ +struct ALT_CLKMGR_SDRPLL_STAT_s +{ + const uint32_t outresetack : 6; /* Output Counter Reset Acknowledge */ + uint32_t : 26; /* *UNDEFINED* */ +}; + +/* The typedef declaration for register ALT_CLKMGR_SDRPLL_STAT. */ +typedef volatile struct ALT_CLKMGR_SDRPLL_STAT_s ALT_CLKMGR_SDRPLL_STAT_t; +#endif /* __ASSEMBLY__ */ + +/* The byte offset of the ALT_CLKMGR_SDRPLL_STAT register from the beginning of the component. */ +#define ALT_CLKMGR_SDRPLL_STAT_OFST 0x1c + +#ifndef __ASSEMBLY__ +/* + * WARNING: The C register and register group struct declarations are provided for + * convenience and illustrative purposes. They should, however, be used with + * caution as the C language standard provides no guarantees about the alignment or + * atomicity of device memory accesses. The recommended practice for writing + * hardware drivers is to use the SoCAL access macros and alt_read_word() and + * alt_write_word() functions. + * + * The struct declaration for register group ALT_CLKMGR_SDRPLL. + */ +struct ALT_CLKMGR_SDRPLL_s +{ + volatile ALT_CLKMGR_SDRPLL_VCO_t vco; /* ALT_CLKMGR_SDRPLL_VCO */ + volatile ALT_CLKMGR_SDRPLL_CTL_t ctrl; /* ALT_CLKMGR_SDRPLL_CTL */ + volatile ALT_CLKMGR_SDRPLL_DDRDQSCLK_t ddrdqsclk; /* ALT_CLKMGR_SDRPLL_DDRDQSCLK */ + volatile ALT_CLKMGR_SDRPLL_DDR2XDQSCLK_t ddr2xdqsclk; /* ALT_CLKMGR_SDRPLL_DDR2XDQSCLK */ + volatile ALT_CLKMGR_SDRPLL_DDRDQCLK_t ddrdqclk; /* ALT_CLKMGR_SDRPLL_DDRDQCLK */ + volatile ALT_CLKMGR_SDRPLL_S2FUSER2CLK_t s2fuser2clk; /* ALT_CLKMGR_SDRPLL_S2FUSER2CLK */ + volatile ALT_CLKMGR_SDRPLL_EN_t en; /* ALT_CLKMGR_SDRPLL_EN */ + volatile ALT_CLKMGR_SDRPLL_STAT_t stat; /* ALT_CLKMGR_SDRPLL_STAT */ +}; + +/* The typedef declaration for register group ALT_CLKMGR_SDRPLL. */ +typedef volatile struct ALT_CLKMGR_SDRPLL_s ALT_CLKMGR_SDRPLL_t; +/* The struct declaration for the raw register contents of register group ALT_CLKMGR_SDRPLL. */ +struct ALT_CLKMGR_SDRPLL_raw_s +{ + volatile uint32_t vco; /* ALT_CLKMGR_SDRPLL_VCO */ + volatile uint32_t ctrl; /* ALT_CLKMGR_SDRPLL_CTL */ + volatile uint32_t ddrdqsclk; /* ALT_CLKMGR_SDRPLL_DDRDQSCLK */ + volatile uint32_t ddr2xdqsclk; /* ALT_CLKMGR_SDRPLL_DDR2XDQSCLK */ + volatile uint32_t ddrdqclk; /* ALT_CLKMGR_SDRPLL_DDRDQCLK */ + volatile uint32_t s2fuser2clk; /* ALT_CLKMGR_SDRPLL_S2FUSER2CLK */ + volatile uint32_t en; /* ALT_CLKMGR_SDRPLL_EN */ + volatile uint32_t stat; /* ALT_CLKMGR_SDRPLL_STAT */ +}; + +/* The typedef declaration for the raw register contents of register group ALT_CLKMGR_SDRPLL. */ +typedef volatile struct ALT_CLKMGR_SDRPLL_raw_s ALT_CLKMGR_SDRPLL_raw_t; +#endif /* __ASSEMBLY__ */ + + +#ifndef __ASSEMBLY__ +/* + * WARNING: The C register and register group struct declarations are provided for + * convenience and illustrative purposes. They should, however, be used with + * caution as the C language standard provides no guarantees about the alignment or + * atomicity of device memory accesses. The recommended practice for writing + * hardware drivers is to use the SoCAL access macros and alt_read_word() and + * alt_write_word() functions. + * + * The struct declaration for register group ALT_CLKMGR. + */ +struct ALT_CLKMGR_s +{ + volatile ALT_CLKMGR_CTL_t ctrl; /* ALT_CLKMGR_CTL */ + volatile ALT_CLKMGR_BYPASS_t bypass; /* ALT_CLKMGR_BYPASS */ + volatile ALT_CLKMGR_INTER_t inter; /* ALT_CLKMGR_INTER */ + volatile ALT_CLKMGR_INTREN_t intren; /* ALT_CLKMGR_INTREN */ + volatile ALT_CLKMGR_DBCTL_t dbctrl; /* ALT_CLKMGR_DBCTL */ + volatile ALT_CLKMGR_STAT_t stat; /* ALT_CLKMGR_STAT */ + volatile uint32_t _pad_0x18_0x3f[10]; /* *UNDEFINED* */ + volatile ALT_CLKMGR_MAINPLL_t mainpllgrp; /* ALT_CLKMGR_MAINPLL */ + volatile ALT_CLKMGR_PERPLL_t perpllgrp; /* ALT_CLKMGR_PERPLL */ + volatile ALT_CLKMGR_SDRPLL_t sdrpllgrp; /* ALT_CLKMGR_SDRPLL */ + volatile uint32_t _pad_0xe0_0x200[72]; /* *UNDEFINED* */ +}; + +/* The typedef declaration for register group ALT_CLKMGR. */ +typedef volatile struct ALT_CLKMGR_s ALT_CLKMGR_t; +/* The struct declaration for the raw register contents of register group ALT_CLKMGR. */ +struct ALT_CLKMGR_raw_s +{ + volatile uint32_t ctrl; /* ALT_CLKMGR_CTL */ + volatile uint32_t bypass; /* ALT_CLKMGR_BYPASS */ + volatile uint32_t inter; /* ALT_CLKMGR_INTER */ + volatile uint32_t intren; /* ALT_CLKMGR_INTREN */ + volatile uint32_t dbctrl; /* ALT_CLKMGR_DBCTL */ + volatile uint32_t stat; /* ALT_CLKMGR_STAT */ + volatile uint32_t _pad_0x18_0x3f[10]; /* *UNDEFINED* */ + volatile ALT_CLKMGR_MAINPLL_raw_t mainpllgrp; /* ALT_CLKMGR_MAINPLL */ + volatile ALT_CLKMGR_PERPLL_raw_t perpllgrp; /* ALT_CLKMGR_PERPLL */ + volatile ALT_CLKMGR_SDRPLL_raw_t sdrpllgrp; /* ALT_CLKMGR_SDRPLL */ + volatile uint32_t _pad_0xe0_0x200[72]; /* *UNDEFINED* */ +}; + +/* The typedef declaration for the raw register contents of register group ALT_CLKMGR. */ +typedef volatile struct ALT_CLKMGR_raw_s ALT_CLKMGR_raw_t; +#endif /* __ASSEMBLY__ */ + + +#ifdef __cplusplus +} +#endif /* __cplusplus */ +#endif /* __ALTERA_ALT_CLKMGR_H__ */ + |