diff options
Diffstat (limited to '')
| -rw-r--r-- | README.configure | 13 |
1 files changed, 8 insertions, 5 deletions
diff --git a/README.configure b/README.configure index 9fe7e0d0c6..9a24abfc5e 100644 --- a/README.configure +++ b/README.configure @@ -32,6 +32,7 @@ RTEMS-specific option are supported: --enable-rtemsbsp="bsp1 bsp2 ..." --enable-tests --enable-rdbg (only valid for i386 and some PowerPC BSPs) + --enable-docs In addition, the following standard autoconf options are frequently used when configuring RTEMS installations: @@ -87,10 +88,10 @@ unless directly specified. There are two ways of changing this: bsps as the default bsps, or + set the RTEMS_BSP variable during make (see below). -The --enable-rtemsbsp= option configures RTEMS for a specific target -architecture. Remember that the target specifies the CPU family while -the BSP specifies the precise board you will be using. The following -targets are supported: +The --enable-rtemsbsp= option configures RTEMS for a specific board +within a target architecture. Remember that the target specifies the +CPU family while the BSP specifies the precise board you will be using. +The following targets are supported: (none) will build the host-based version on Linux, Solaris and HPUX. @@ -109,7 +110,7 @@ targets are supported: sh-rtems sparc-rtems bare see notes - + The cross-compiler is set to $(target)-gcc by default. This can be overridden by: @@ -135,6 +136,8 @@ As an example, to build and install the mvme136 and dmv152 bsps for m68k do: The sample tests are built by 'make all', do a 'make test' to build the full test suite. +By default, --enable-docs is disabled and documentation is not built. + 2.2 Build with Cygnus one-tree release To build and install RTEMS with the one-tree structure, just copy the rtems |