diff options
19 files changed, 12 insertions, 1716 deletions
diff --git a/c/src/lib/libbsp/arm/ChangeLog b/c/src/lib/libbsp/arm/ChangeLog index 7a37d5f597..b2329f8584 100644 --- a/c/src/lib/libbsp/arm/ChangeLog +++ b/c/src/lib/libbsp/arm/ChangeLog @@ -1,3 +1,15 @@ +2005-02-25 Joel Sherrill <joel@OARcorp.com> + + * arm_bare_bsp/.cvsignore, arm_bare_bsp/ChangeLog, + arm_bare_bsp/Makefile.am, arm_bare_bsp/bsp_specs, + arm_bare_bsp/configure.ac, arm_bare_bsp/clock/clockdrv.c, + arm_bare_bsp/include/.cvsignore, arm_bare_bsp/include/bsp.h, + arm_bare_bsp/include/registers.h, arm_bare_bsp/include/tm27.h, + arm_bare_bsp/irq/bsp_irq_asm.S, arm_bare_bsp/irq/bsp_irq_init.c, + arm_bare_bsp/irq/irq.c, arm_bare_bsp/irq/irq.h, + arm_bare_bsp/start/start.S, arm_bare_bsp/startup/bspstart.c, + arm_bare_bsp/startup/exit.c, arm_bare_bsp/startup/linkcmds: Removed. + 2004-09-24 Ralf Corsepius <ralf_corsepius@rtems.org> * configure.ac: Require automake > 1.9. diff --git a/c/src/lib/libbsp/arm/arm_bare_bsp/.cvsignore b/c/src/lib/libbsp/arm/arm_bare_bsp/.cvsignore deleted file mode 100644 index bfdfd995be..0000000000 --- a/c/src/lib/libbsp/arm/arm_bare_bsp/.cvsignore +++ /dev/null @@ -1,14 +0,0 @@ -aclocal.m4 -autom4te*.cache -config.cache -config.guess -config.log -config.status -config.sub -configure -depcomp -install-sh -Makefile -Makefile.in -missing -mkinstalldirs diff --git a/c/src/lib/libbsp/arm/arm_bare_bsp/ChangeLog b/c/src/lib/libbsp/arm/arm_bare_bsp/ChangeLog deleted file mode 100644 index 3eda2ce566..0000000000 --- a/c/src/lib/libbsp/arm/arm_bare_bsp/ChangeLog +++ /dev/null @@ -1,388 +0,0 @@ -2005-01-07 Ralf Corsepius <ralf.corsepius@rtems.org> - - * Makefile.am: Eliminate CFLAGS_OPTIMIZE_V. - -2005-01-04 Joel Sherrill <joel@OARcorp.com> - - * start/start.S: Remove warnings. - -2005-01-02 Ralf Corsepius <ralf.corsepius@rtems.org> - - * Makefile.am: Remove build-variant support. - -2004-11-05 Joel Sherrill <joel@OARcorp.com> - - * startup/linkcmds: Add .gnu.linkonce.b section. - -2004-09-24 Ralf Corsepius <ralf_corsepius@rtems.org> - - * configure.ac: Require automake > 1.9. - -2004-04-23 Ralf Corsepius <ralf_corsepius@rtems.org> - - PR 610/bsps - * Makefile.am: Add include/tm27.h, Cosmetics. - * include/tm27.h: Final cosmetics. - -2004-04-22 Ralf Corsepius <ralf_corsepius@rtems.org> - - * include/bsp.h: Split out tmtest27 support. - * include/tm27.h: New. - -2004-04-01 Ralf Corsepius <ralf_corsepius@rtems.org> - - * include/bsp.h: Include <rtems/clockdrv.h> instead of <clockdrv.h>. - * include/bsp.h: Include <rtems/console.h> instead of <console.h>. - * include/bsp.h: Include <rtems/iosupp.h> instead of <iosupp.h>. - -2004-03-31 Ralf Corsepius <ralf_corsepius@rtems.org> - - * startup/bspstart.c: Convert to using c99 fixed size types. - -2004-03-03 Joel Sherrill <joel@OARcorp.com> - - * startup/linkcmds: Add more memory and sections so tests can link. - This is a generic BSP for a CPU model so OK to do this. - -2004-02-19 Ralf Corsepius <corsepiu@faw.uni-ulm.de> - - * Makefile.am: Reflect changes to bsp.am. - Preinstall dist_project_lib*. - -2004-02-14 Ralf Corsepius <corsepiu@faw.uni-ulm.de> - - * Makefile.am: Reflect changes to bsp.am. - -2004-02-12 Ralf Corsepius <corsepiu@faw.uni-ulm.de> - - * Makefile.am: Use CPPASCOMPILE instead of CCASCOMPILE. - -2004-02-06 Ralf Corsepius <corsepiu@faw.uni-ulm.de> - - * Makefile.am: Pickup files from ../../arm/shared instead of - ../shared. Reformat. - -2004-01-28 Ralf Corsepius <corsepiu@faw.uni-ulm.de> - - * Makefile.am: Merge-in clock/Makefile.am, console/Makefile.am, - irq/Makefile.am, start/Makefile.am, startup/Makefile.am, - timer/Makefile.am, wrapup/Makefile.am. Use automake compilation rules. - * clock/Makefile.am, console/Makefile.am, irq/Makefile.am, - start/Makefile.am, startup/Makefile.am, timer/Makefile.am, - wrapup/Makefile.am: Remove. - * configure.ac: Reflect changes above. - -2004-01-21 Ralf Corsepius <corsepiu@faw.uni-ulm.de> - - * Makefile.am: Add PREINSTALL_DIRS. - * irq/Makefile.am: Ditto. - -2004-01-14 Ralf Corsepius <corsepiu@faw.uni-ulm.de> - - * Makefile.am: Re-add dirstamps to PRE/TMPINSTALL_FILES. - Add PRE/TMPINSTALL_FILES to CLEANFILES. - * irq/Makefile.am: Ditto. - * start/Makefile.am: Ditto. - * startup/Makefile.am: Ditto. - -2004-01-05 Ralf Corsepius <corsepiu@faw.uni-ulm.de> - - * wrapup/Makefile.am: Eliminate $(LIB). - Use noinst_DATA to trigger building libbsp.a. - -2003-12-15 Ralf Corsepius <corsepiu@faw.uni-ulm.de> - - PR 541/bsps - * startup/linkcmds: Remove SEARCH_DIR. - -2003-12-13 Ralf Corsepius <corsepiu@faw.uni-ulm.de> - - * start/Makefile.am: s,${PROJECT_RELEASE}/lib,$(PROJECT_LIB),g. - * startup/Makefile.am: s,${PROJECT_RELEASE}/lib,$(PROJECT_LIB),g. - -2003-12-12 Ralf Corsepius <corsepiu@faw.uni-ulm.de> - - * irq/Makefile.am: Use mkdir_p. Remove dirs from PRE/TMPINSTALL_FILES. - * start/Makefile.am: Use mkdir_p. Remove dirs from PRE/TMPINSTALL_FILES. - * startup/Makefile.am: Use mkdir_p. Remove dirs from PRE/TMPINSTALL_FILES. - -2003-12-12 Ralf Corsepius <corsepiu@faw.uni-ulm.de> - - * configure.ac: Require automake >= 1.8, autoconf >= 2.59. - -2003-12-09 Ralf Corsepius <corsepiu@faw.uni-ulm.de> - - * console/Makefile.am: Misc cleanups and fixes. - * irq/Makefile.am: Misc cleanups and fixes. - * start/Makefile.am: Misc cleanups and fixes. - * startup/Makefile.am: Misc cleanups and fixes. - * wrapup/Makefile.am: Misc cleanups and fixes. - -2003-12-05 Ralf Corsepius <corsepiu@faw.uni-ulm.de> - - * console/Makefile.am: Remove all: $(ARCH). - * irq/Makefile.am: Remove all: $(ARCH). - * startup/Makefile.am: Remove all: $(ARCH). - * wrapup/Makefile.am: Remove all: $(ARCH). - -2003-12-03 Ralf Corsepius <corsepiu@faw.uni-ulm.de> - - * Makefile.am: Add preinstallation dirstamp support. - * clock/Makefile.am: Cosmetics. - * console/Makefile.am: Cosmetics. - * irq/Makefile.am: Add preinstallation dirstamp support. - * startup/Makefile.am: Cosmetics. - * timer/Makefile.am: Cosmetics. - -2003-12-02 Ralf Corsepius <corsepiu@faw.uni-ulm.de> - - * clock/Makefile.am: Remove all-local: $(ARCH). - * start/Makefile.am: Remove all-local: $(ARCH). - * timer/Makefile.am: Remove all-local: $(ARCH). - -2003-09-29 Ralf Corsepius <corsepiu@faw.uni-ulm.de> - - * Makefile.am: Remove refs to non-existing files include/bspio.h and - include/uart.h. - -2003-09-29 Ralf Corsepius <corsepiu@faw.uni-ulm.de> - - * Makefile.am: Merge-in include/Makefile.am. - Reflect changes to bsp.am. - * include/Makefile.am: Remove. - * configure.ac: Reflect changes above. - -2003-09-17 Ralf Corsepius <corsepiu@faw.uni-ulm.de> - - * bsp_specs: Remove *lib:. - -2003-09-04 Joel Sherrill <joel@OARcorp.com> - - * include/bsp.h, include/registers.h, irq/bsp_irq_asm.S, - irq/bsp_irq_init.c, irq/irq.c, irq/irq.h, start/start.S, - startup/bspstart.c, startup/exit.c: URL for license changed. - -2003-08-18 Ralf Corsepius <corsepiu@faw.uni-ulm.de> - - * Makefile.am: Reflect having moved aclocal/. - -2003-08-16 Ralf Corsepius <corsepiu@faw.uni-ulm.de> - - * Makefile.am: Reflect having moved automake/. - * clock/Makefile.am: Reflect having moved automake/. - * console/Makefile.am: Reflect having moved automake/. - * include/Makefile.am: Reflect having moved automake/. - * irq/Makefile.am: Reflect having moved automake/. - * start/Makefile.am: Reflect having moved automake/. - * startup/Makefile.am: Reflect having moved automake/. - * timer/Makefile.am: Reflect having moved automake/. - * wrapup/Makefile.am: Reflect having moved automake/. - -2003-08-11 Ralf Corsepius <corsepiu@faw.uni-ulm.de> - - PR 452/bsps - * startup/Makefile.am: Remove USE_INIT_FINI. - -2003-08-11 Ralf Corsepius <corsepiu@faw.uni-ulm.de> - - * configure.ac: Use rtems-bugs@rtems.com as bug report email address. - -2003-08-06 Ralf Corsepius <corsepiu@faw.uni-ulm.de> - - PR 445/bsps - * bsp_specs: Remove -D__embedded__ -Asystem(embedded) from cpp. - Remove cpp, old_cpp (now unused). - -2003-08-06 Ralf Corsepius <corsepiu@faw.uni-ulm.de> - - PR 444/bsps - * bsp_specs: Remove -DUSE_ENHANCED_INTR_API. - -2003-03-06 Ralf Corsepius <corsepiu@faw.uni-ulm.de> - - * configure.ac: Remove AC_CONFIG_AUX_DIR. - -2003-02-11 Ralf Corsepius <corsepiu@faw.uni-ulm.de> - - * configure.ac: AM_INIT_AUTOMAKE([1.7.2]). - -2003-02-11 Ralf Corsepius <corsepiu@faw.uni-ulm.de> - - * configure.ac: AC_PREREQ(2.57). - -2003-01-20 Joel Sherrill <joel@OARcorp.com> - - * startup/linkcmds: Add FreeBSD SYSCTL() sections for networking. - -2002-12-13 Ralf Corsepius <corsepiu@faw.uni-ulm.de> - - * clock/Makefile.am: Don't include @RTEMS_BSP@.cfg. - * console/Makefile.am: Don't include @RTEMS_BSP@.cfg. - * irq/Makefile.am: Don't include @RTEMS_BSP@.cfg. - * start/Makefile.am: Don't include @RTEMS_BSP@.cfg. - * startup/Makefile.am: Don't include @RTEMS_BSP@.cfg. - * timer/Makefile.am: Don't include @RTEMS_BSP@.cfg. - -2002-12-12 Ralf Corsepius <corsepiu@faw.uni-ulm.de> - - * start/Makefile.am: Use install-data-local to install startfile. - -2002-12-10 Ralf Corsepius <corsepiu@faw.uni-ulm.de> - - * wrapup/Makefile.am: Don't include @RTEMS_BSP@.cfg. - -2002-10-21 Ralf Corsepius <corsepiu@faw.uni-ulm.de> - - * .cvsignore: Reformat. - Add autom4te*cache. - Remove autom4te.cache. - -2002-08-21 Joel Sherrill <joel@OARcorp.com> - - * bsp_specs: Added support for -nostdlibs. - -2002-08-11 Ralf Corsepius <corsepiu@faw.uni-ulm.de> - - * clock/Makefile.am: Use .$(OBJEXT) instead of .o. - * console/Makefile.am: Use .$(OBJEXT) instead of .o. - * irq/Makefile.am: Use .$(OBJEXT) instead of .o. - * start/Makefile.am: Use .$(OBJEXT) instead of .o. - * startup/Makefile.am: Use .$(OBJEXT) instead of .o. - * timer/Makefile.am: Use .$(OBJEXT) instead of .o. - * wrapup/Makefile.am: Use .$(OBJEXT) instead of .o. - -2002-07-20 Ralf Corsepius <corsepiu@faw.uni-ulm.de> - - * start/Makefile.am: Eliminate PGM. - Add bsplib_DATA = $(PROJECT_RELEASE)/lib/start$(LIB_VARIANT).o. - -2002-07-19 Ralf Corsepius <corsepiu@faw.uni-ulm.de> - - * startup/Makefile.am: Add bsplib_DATA = linkcmds. - -2002-07-17 Jay Monkman <jtm@smoothsmoothie.com> - - * irq/bsp_irq_asm.S: Disable code to touch PIC. - -2002-06-29 Ralf Corsepius <corsepiu@faw.uni-ulm.de> - - * wrapup/Makefile.am: Remove preinstallation of libbsp.a, - -2001-05-09 Joel Sherrill <joel@OARcorp.com> - - * startup/linkcmds: In support of gcc 3.1, added one of more - of the sections .jcr, .rodata*, .data.*, .gnu.linkonce.s2.*, - .gnu.linkonce.sb2.*, and .gnu.linkonce.s.*. Spacing corrections - and direction of segments to memory regions may also have been - addressed. This was a sweep across all BSPs. - -2002-03-30 Ralf Corsepius <corsepiu@faw.uni-ulm.de> - - * configure.ac: Update, remove code rott. - -2002-03-27 Ralf Corsepius <corsepiu@faw.uni-ulm.de> - - * configure.ac: - AC_INIT(package,_RTEMS_VERSION,_RTEMS_BUGS). - AM_INIT_AUTOMAKE([no-define foreign 1.6]). - * clock/Makefile.am: Remove AUTOMAKE_OPTIONS. - * Makefile.am: Remove AUTOMAKE_OPTIONS. - * console/Makefile.am: Remove AUTOMAKE_OPTIONS. - * include/Makefile.am: Remove AUTOMAKE_OPTIONS. - * irq/Makefile.am: Remove AUTOMAKE_OPTIONS. - * start/Makefile.am: Remove AUTOMAKE_OPTIONS. - * startup/Makefile.am: Remove AUTOMAKE_OPTIONS. - * timer/Makefile.am: Remove AUTOMAKE_OPTIONS. - * wrapup/Makefile.am: Remove AUTOMAKE_OPTIONS. - -2002-01-03 Ralf Corsepius <corsepiu@faw.uni-ulm.de> - - * startup/exit.c: Include rtems/bspIo.h instead of bspIo.h. - -2001-12-22 Ralf Corsepius <corsepiu@faw.uni-ulm.de> - - * bsp_specs: Replace -lrtemsall with -lrtemsbsp -lrtemscpu, - replace -lrtemsall_g with -lrtemsbsp_g -lrtemscpu_g. - -2001-11-30 Ralf Corsepius <corsepiu@faw.uni-ulm.de> - - * configure.ac: Introduce RTEMS_BSP_CONFIGURE. - -2001-10-17 Joel Sherrill <joel@OARcorp.com> - - * timer: New subdirectory. - * timer/Makefile.am: New file. - * timer/.cvsignore: New file. - * Makefile.am: Modified to reflect above. - * configure.ac: Ditto. - * wrapup/Makefile.am: Ditto. - * include/bsp.h: Stubs to let tm27 compile and link. - -2001-10-11 Ralf Corsepius <corsepiu@faw.uni-ulm.de> - - * .cvsignore: Add autom4te.cache for autoconf > 2.52. - * configure.in: Remove. - * configure.ac: New file, generated from configure.in by autoupdate. - -2001-09-27 Ralf Corsepius <corsepiu@faw.uni-ulm.de> - - * include/Makefile.am: Use 'CLEANFILES ='. - * include/Makefile.am: Use 'TMPINSTALL_FILES ='. - * irq/Makefile.am: Use 'PREINSTALL_FILES ='. - -2001-05-22 Ralf Corsepius <corsepiu@faw.uni-ulm.de> - - * configure.in: Add include/bspopts.h. - * console/Makefile.am: Use *_HEADERS instead of *H_FILES. - * irq/Makefile.am: Use *_HEADER instead of *H_FILES. - * include/.cvsignore: Add bspopts.h*, coverhd.h, stamp-h* - * include/Makefile.am: Add bspopts.h, Use *_HEADER instead of *H_FILES. - * include/bsp.h: Add bspopts.h. - -2001-05-10 Ralf Corsepius <corsepiu@faw.uni-ulm.de> - - * configure.in: Use RTEMS_PROG_CC_FOR_TARGET([-ansi -fasm]). - -2001-01-08 Joel Sherrill <joel@OARcorp.com> - - * include/bsp.h: Added closing brace for extern C. - -2000-12-06 Joel Sherrill <joel@OARcorp.com> - - * Makefile.am: Add include of bsp.am. Add clock subdirectory. - * configure.in: Add clock subdirectory. - * include/Makefile.am: Add coverhd.h. - -2000-11-09 Ralf Corsepius <corsepiu@faw.uni-ulm.de> - - * Makefile.am: Use ... instead of RTEMS_TOPdir in ACLOCAL_AMFLAGS. - -2000-11-02 Joel Sherrill <joel@OARcorp.com> - - * bsp_specs: Remove -Tlinkcmds from *link rule. - -2000-11-02 Ralf Corsepius <corsepiu@faw.uni-ulm.de> - - * Makefile.am: Switch to ACLOCAL_AMFLAGS = -I $(RTEMS_TOPdir)/aclocal. - -2000-11-01 Joel Sherrill <joel@OARcorp.com> - - * startup/bspstart.c: assoc.h, error.h, libio_.h, libio.h, - and libcsupport.h moved from libc to lib/include/rtems and - now must be referenced as <rtems/XXX.h>. Header file order - was cleaned up while doing this. - -2000-10-27 Ralf Corsepius <corsepiu@faw.uni-ulm.de> - - * configure.in, Makefile.am: ACLOCAL_AMFLAGS= -I $(RTEMS_TOPdir)/macros. - Switch to GNU canonicalization. - -2000-09-04 Ralf Corsepius <corsepiu@faw.uni-ulm.de> - - * clock/Makefile.am, console/Makefile.am, irq/Makefile.am, - start/Makefile.am, startup/Makefile.am, wrapup/Makefile.am: - Include compile.am. - -2000-08-10 Joel Sherrill <joel@OARcorp.com> - - * ChangeLog: New file. diff --git a/c/src/lib/libbsp/arm/arm_bare_bsp/Makefile.am b/c/src/lib/libbsp/arm/arm_bare_bsp/Makefile.am deleted file mode 100644 index e9f511cedb..0000000000 --- a/c/src/lib/libbsp/arm/arm_bare_bsp/Makefile.am +++ /dev/null @@ -1,124 +0,0 @@ -## -## $Id$ -## - -ACLOCAL_AMFLAGS = -I ../../../../aclocal - -noinst_PROGRAMS = - -include $(top_srcdir)/../../../../automake/compile.am -include $(top_srcdir)/../../bsp.am - -dist_project_lib_DATA = bsp_specs - -include_HEADERS = include/bsp.h -include_HEADERS += include/tm27.h - -nodist_include_HEADERS = include/bspopts.h -DISTCLEANFILES = include/bspopts.h - -include_HEADERS += include/registers.h - -nodist_include_HEADERS += ../../shared/include/coverhd.h - -EXTRA_DIST = start/start.S -start.$(OBJEXT): start/start.S - $(CPPASCOMPILE) -DASM -o $@ -c $< -project_lib_DATA = start.$(OBJEXT) - -dist_project_lib_DATA += startup/linkcmds - -noinst_PROGRAMS += startup.rel -startup_rel_SOURCES = ../../shared/bsplibc.c ../../shared/bsppost.c \ - startup/bspstart.c startup/exit.c ../../shared/bootcard.c \ - ../../shared/main.c ../../shared/sbrk.c \ - ../../shared/gnatinstallhandler.c -startup_rel_CPPFLAGS = $(AM_CPPFLAGS) -startup_rel_LDFLAGS = $(RTEMS_RELLDFLAGS) - -noinst_PROGRAMS += clock.rel -clock_rel_SOURCES = clock/clockdrv.c -clock_rel_CPPFLAGS = $(AM_CPPFLAGS) -clock_rel_LDFLAGS = $(RTEMS_RELLDFLAGS) - -noinst_PROGRAMS += console.rel -console_rel_SOURCES = ../../arm/shared/comm/uart.c \ - ../../arm/shared/comm/console.c -console_rel_CPPFLAGS = $(AM_CPPFLAGS) -console_rel_LDFLAGS = $(RTEMS_RELLDFLAGS) - -noinst_PROGRAMS += timer.rel -timer_rel_SOURCES = ../../shared/timerstub.c -timer_rel_CPPFLAGS = $(AM_CPPFLAGS) -timer_rel_LDFLAGS = $(RTEMS_RELLDFLAGS) - -include_HEADERS += irq/irq.h - -noinst_PROGRAMS += irq.rel -irq_rel_SOURCES = irq/irq.c ../../arm/shared/irq/irq_init.c \ - irq/bsp_irq_init.c ../../arm/shared/irq/irq_asm.S irq/bsp_irq_asm.S \ - irq/irq.h -irq_rel_CPPFLAGS = $(AM_CPPFLAGS) -irq_rel_LDFLAGS = $(RTEMS_RELLDFLAGS) - -noinst_LIBRARIES = libbsp.a -libbsp_a_SOURCES = -libbsp_a_LIBADD= clock.rel console.rel startup.rel timer.rel irq.rel - -all-local: $(PREINSTALL_FILES) $(TMPINSTALL_FILES) - -PREINSTALL_DIRS = -PREINSTALL_FILES = -TMPINSTALL_FILES = - -$(PROJECT_INCLUDE)/$(dirstamp): - @$(mkdir_p) $(PROJECT_INCLUDE) - @: > $(PROJECT_INCLUDE)/$(dirstamp) -PREINSTALL_DIRS += $(PROJECT_INCLUDE)/$(dirstamp) - -$(PROJECT_LIB)/$(dirstamp): - @$(mkdir_p) $(PROJECT_LIB) - @: > $(PROJECT_LIB)/$(dirstamp) -PREINSTALL_DIRS += $(PROJECT_LIB)/$(dirstamp) - -$(PROJECT_LIB)/bsp_specs: bsp_specs $(PROJECT_LIB)/$(dirstamp) - $(INSTALL_DATA) $< $(PROJECT_LIB)/bsp_specs -PREINSTALL_FILES += $(PROJECT_LIB)/bsp_specs - -$(PROJECT_INCLUDE)/bsp.h: include/bsp.h $(PROJECT_INCLUDE)/$(dirstamp) - $(INSTALL_DATA) $< $(PROJECT_INCLUDE)/bsp.h -PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp.h - -$(PROJECT_INCLUDE)/tm27.h: include/tm27.h $(PROJECT_INCLUDE)/$(dirstamp) - $(INSTALL_DATA) $< $(PROJECT_INCLUDE)/tm27.h -PREINSTALL_FILES += $(PROJECT_INCLUDE)/tm27.h - -$(PROJECT_INCLUDE)/bspopts.h: include/bspopts.h $(PROJECT_INCLUDE)/$(dirstamp) - $(INSTALL_DATA) $< $(PROJECT_INCLUDE)/bspopts.h -PREINSTALL_FILES += $(PROJECT_INCLUDE)/bspopts.h - -$(PROJECT_INCLUDE)/registers.h: include/registers.h $(PROJECT_INCLUDE)/$(dirstamp) - $(INSTALL_DATA) $< $(PROJECT_INCLUDE)/registers.h -PREINSTALL_FILES += $(PROJECT_INCLUDE)/registers.h - -$(PROJECT_INCLUDE)/coverhd.h: ../../shared/include/coverhd.h $(PROJECT_INCLUDE)/$(dirstamp) - $(INSTALL_DATA) $< $(PROJECT_INCLUDE)/coverhd.h -PREINSTALL_FILES += $(PROJECT_INCLUDE)/coverhd.h - -$(PROJECT_LIB)/start.$(OBJEXT): start.$(OBJEXT) $(PROJECT_LIB)/$(dirstamp) - $(INSTALL_DATA) $< $(PROJECT_LIB)/start.$(OBJEXT) -TMPINSTALL_FILES += $(PROJECT_LIB)/start.$(OBJEXT) - -$(PROJECT_LIB)/linkcmds: startup/linkcmds $(PROJECT_LIB)/$(dirstamp) - $(INSTALL_DATA) $< $(PROJECT_LIB)/linkcmds -PREINSTALL_FILES += $(PROJECT_LIB)/linkcmds - -$(PROJECT_INCLUDE)/irq.h: irq/irq.h $(PROJECT_INCLUDE)/$(dirstamp) - $(INSTALL_DATA) $< $(PROJECT_INCLUDE)/irq.h -PREINSTALL_FILES += $(PROJECT_INCLUDE)/irq.h - -CLEANFILES = $(PREINSTALL_FILES) -DISTCLEANFILES += $(PREINSTALL_DIRS) -CLEANFILES += $(TMPINSTALL_FILES) - -include $(top_srcdir)/../../../../automake/local.am diff --git a/c/src/lib/libbsp/arm/arm_bare_bsp/bsp_specs b/c/src/lib/libbsp/arm/arm_bare_bsp/bsp_specs deleted file mode 100644 index 24e3cd086e..0000000000 --- a/c/src/lib/libbsp/arm/arm_bare_bsp/bsp_specs +++ /dev/null @@ -1,12 +0,0 @@ -%rename endfile old_endfile -%rename startfile old_startfile -%rename link old_link - -*startfile: -%{!qrtems: %(old_startfile)} %{!nostdlib: %{qrtems: \ -%{!qrtems_debug: start.o%s crtbegin.o%s} \ -%{qrtems_debug: start_g.o%s crtbegin.o%s}}} - -*link: -%{!qrtems: %(old_link)} %{qrtems: -Qy -dp -Bstatic -e _start} - diff --git a/c/src/lib/libbsp/arm/arm_bare_bsp/clock/clockdrv.c b/c/src/lib/libbsp/arm/arm_bare_bsp/clock/clockdrv.c deleted file mode 100644 index f61b66e42d..0000000000 --- a/c/src/lib/libbsp/arm/arm_bare_bsp/clock/clockdrv.c +++ /dev/null @@ -1,21 +0,0 @@ -/* - * Instantiate the clock driver shell. - * - * Since there is no clock source on the simulator, all we do is - * make sure it will build. - * - * $Id$ - */ - -#define CLOCK_VECTOR 0 - -#define Clock_driver_support_at_tick() - -#define Clock_driver_support_install_isr( _new, _old ) \ - do { _old = 0; } while(0) - -#define Clock_driver_support_initialize_hardware() - -#define Clock_driver_support_shutdown_hardware() - -#include "../../../shared/clockdrv_shell.c" diff --git a/c/src/lib/libbsp/arm/arm_bare_bsp/configure.ac b/c/src/lib/libbsp/arm/arm_bare_bsp/configure.ac deleted file mode 100644 index 8e5d085328..0000000000 --- a/c/src/lib/libbsp/arm/arm_bare_bsp/configure.ac +++ /dev/null @@ -1,20 +0,0 @@ -## Process this file with autoconf to produce a configure script. -## -## $Id$ - -AC_PREREQ(2.59) -AC_INIT([rtems-c-src-lib-libbsp-arm-arm_bare_bsp],[_RTEMS_VERSION],[rtems-bugs@rtems.com]) -AC_CONFIG_SRCDIR([bsp_specs]) -RTEMS_TOP(../../../../../..) - -RTEMS_CANONICAL_TARGET_CPU -AM_INIT_AUTOMAKE([no-define nostdinc foreign 1.9]) -RTEMS_BSP_CONFIGURE - -RTEMS_PROG_CC_FOR_TARGET([-ansi -fasm]) -RTEMS_CANONICALIZE_TOOLS -RTEMS_PROG_CCAS - -# Explicitly list all Makefiles here -AC_CONFIG_FILES([Makefile]) -AC_OUTPUT diff --git a/c/src/lib/libbsp/arm/arm_bare_bsp/include/.cvsignore b/c/src/lib/libbsp/arm/arm_bare_bsp/include/.cvsignore deleted file mode 100644 index cd2a4e9988..0000000000 --- a/c/src/lib/libbsp/arm/arm_bare_bsp/include/.cvsignore +++ /dev/null @@ -1,5 +0,0 @@ -coverhd.h -bspopts.h -bspopts.h.in -stamp-h -stamp-h.in diff --git a/c/src/lib/libbsp/arm/arm_bare_bsp/include/bsp.h b/c/src/lib/libbsp/arm/arm_bare_bsp/include/bsp.h deleted file mode 100644 index 1315763eb4..0000000000 --- a/c/src/lib/libbsp/arm/arm_bare_bsp/include/bsp.h +++ /dev/null @@ -1,36 +0,0 @@ -/*-------------------------------------------------------------------------+ -| bsp.h - ARM BSP -+--------------------------------------------------------------------------+ -| This include file contains definitions related to the ARM BSP. -+--------------------------------------------------------------------------+ -| -| Copyright (c) Canon Research France SA.] -| Emmanuel Raguet, mailto:raguet@crf.canon.fr -| -| The license and distribution terms for this file may be -| found in found in the file LICENSE in this distribution or at -| http://www.rtems.com/license/LICENSE. -| -| $Id$ -+--------------------------------------------------------------------------*/ - -#ifndef __BSP_H_ -#define __BSP_H_ - -#ifdef __cplusplus -extern "C" { -#endif - -#include <bspopts.h> - -#include <rtems.h> -#include <rtems/iosupp.h> -#include <rtems/console.h> -#include <rtems/clockdrv.h> - -#ifdef __cplusplus -} -#endif - -#endif /* __BSP_H_ */ -/* end of include file */ diff --git a/c/src/lib/libbsp/arm/arm_bare_bsp/include/registers.h b/c/src/lib/libbsp/arm/arm_bare_bsp/include/registers.h deleted file mode 100644 index 9c1c8369bb..0000000000 --- a/c/src/lib/libbsp/arm/arm_bare_bsp/include/registers.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * BSP registers declaration - * - * Copyright (c) 2000 Canon Research France SA. - * Emmanuel Raguet, mailto:raguet@crf.canon.fr - * - * The license and distribution terms for this file may be - * found in found in the file LICENSE in this distribution or at - * http://www.rtems.com/license/LICENSE. - * - */ - -#ifndef __REGS_H__ -#define __REGS_H__ - -/* - * VARIABLE DECLARATION - */ - -#ifndef __asm__ -extern volatile unsigned long *Regs; /* Chip registers */ -#endif - -/* - * Here must be "defined" each register, to use with Regs as - * LM_Regs[REGISTER1] = value - */ - -#define REGISTER1 1 -#define REGISTER2 2 - -/* - * define for UART registers to be able - * to compile and link arm_bare_bsp - */ - -#define RSRBR 0 -#define RSTHR 1 -#define RSIER 2 -#define RSIIR 3 -#define RSFCR 4 -#define RSLCR 5 -#define RSLSR 6 -#define RSDLL 7 -#define RSDLH 8 -#define RSCNT 9 - -#endif /*__REGS_H__*/ diff --git a/c/src/lib/libbsp/arm/arm_bare_bsp/include/tm27.h b/c/src/lib/libbsp/arm/arm_bare_bsp/include/tm27.h deleted file mode 100644 index 0af1aef273..0000000000 --- a/c/src/lib/libbsp/arm/arm_bare_bsp/include/tm27.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * tm27.h - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.rtems.com/license/LICENSE. - * - * $Id$ - */ - -#ifndef _RTEMS_TMTEST27 -#error "This is an RTEMS internal file you must not include directly." -#endif - -#ifndef __tm27_h -#define __tm27_h - -/* - * Define the interrupt mechanism for Time Test 27 - * - * NOTE: Following are not defined and are board independent - * - */ - -#define MUST_WAIT_FOR_INTERRUPT 0 - -#define Install_tm27_vector( handler ) /* empty */ - -#define Cause_tm27_intr() /* empty */ - -#define Clear_tm27_intr() /* empty */ - -#define Lower_tm27_intr() /* empty */ - -#endif diff --git a/c/src/lib/libbsp/arm/arm_bare_bsp/irq/bsp_irq_asm.S b/c/src/lib/libbsp/arm/arm_bare_bsp/irq/bsp_irq_asm.S deleted file mode 100644 index 311578d50e..0000000000 --- a/c/src/lib/libbsp/arm/arm_bare_bsp/irq/bsp_irq_asm.S +++ /dev/null @@ -1,47 +0,0 @@ -/* bsp_irq_asm.S - * - * This file contains the implementation of the IRQ handler - * for a specific BSP - * - * CopyRight (C) 2000 Canon Research France SA. - * Emmanuel Raguet, mailto:raguet@crf.canon.fr - * - * The license and distribution terms for this file may be - * found in found in the file LICENSE in this distribution or at - * http://www.rtems.com/license/LICENSE. - * - * $Id$ - */ - -#define __asm__ -#include <registers.h> - -/* - * Function to obtain, execute an IT handler and acknowledge the IT - */ - - .globl ExecuteITHandler - -ExecuteITHandler : - - /* - * Here is the code to execute the appropriate INT handler - */ - - mov pc, r0 - -#if 0 -/* - * Function to acknowledge the IT controller - */ - .globl AckControler - -AckControler: - - /* - * Here is the code to acknowledge the PIC - */ - - b ReturnFromAck /* return to ISR handler */ - -#endif diff --git a/c/src/lib/libbsp/arm/arm_bare_bsp/irq/bsp_irq_init.c b/c/src/lib/libbsp/arm/arm_bare_bsp/irq/bsp_irq_init.c deleted file mode 100644 index c96df8f6e2..0000000000 --- a/c/src/lib/libbsp/arm/arm_bare_bsp/irq/bsp_irq_init.c +++ /dev/null @@ -1,26 +0,0 @@ -/* irq_init.c - * - * This file contains the implementation of rtems initialization - * related to interrupt handling. - * - * CopyRight (C) 2000 Canon Research Centre France SA. - * Emmanuel Raguet, mailto:raguet@crf.canon.fr - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.rtems.com/license/LICENSE. - * - * $Id$ - */ -#include <irq.h> -#include <bsp.h> -#include <registers.h> - -void BSP_rtems_irq_mngt_init() { - - /* - * Here is the code to initialize the INT for - * the specified BSP - */ - -} diff --git a/c/src/lib/libbsp/arm/arm_bare_bsp/irq/irq.c b/c/src/lib/libbsp/arm/arm_bare_bsp/irq/irq.c deleted file mode 100644 index 3e1f17f488..0000000000 --- a/c/src/lib/libbsp/arm/arm_bare_bsp/irq/irq.c +++ /dev/null @@ -1,117 +0,0 @@ -/* irq.c - * - * This file contains the implementation of the function described in irq.h - * - * CopyRight (C) 2000 Canon Research France SA. - * Emmanuel Raguet, mailto:raguet@crf.canon.fr - * - * The license and distribution terms for this file may be - * found in found in the file LICENSE in this distribution or at - * http://www.rtems.com/license/LICENSE. - * - * $Id$ - */ - -#include <bsp.h> -#include <irq.h> -#include <registers.h> -#include <rtems/score/thread.h> -#include <rtems/score/apiext.h> - -/* - * This function check that the value given for the irq line - * is valid. - */ - -static int isValidInterrupt(int irq) -{ - if ( (irq < 0) || (irq > BSP_MAX_INT)) - return 0; - return 1; -} - -/* - * ------------------------ RTEMS Single Irq Handler Mngt Routines ---------------- - */ - -int BSP_install_rtems_irq_handler (const rtems_irq_connect_data* irq) -{ - rtems_irq_hdl *HdlTable; - rtems_interrupt_level level; - - if (!isValidInterrupt(irq->name)) { - return 0; - } - /* - * Check if default handler is actually connected. If not issue an error. - */ - HdlTable = VECTOR_TABLE; - if (*(HdlTable + irq->name) != default_int_handler) { - return 0; - } - - _CPU_ISR_Disable(level); - - /* - * store the new handler - */ - *(HdlTable + irq->name) = irq->hdl; - - /* - * Here is the code to install an interrupt vector - * for the BSP : unmask INT, .... - * ........................ - */ - - _CPU_ISR_Enable(level); - - return 1; -} - -int BSP_remove_rtems_irq_handler (const rtems_irq_connect_data* irq) -{ - rtems_irq_hdl *HdlTable; - rtems_interrupt_level level; - - if (!isValidInterrupt(irq->name)) { - return 0; - } - /* - * Check if the handler is actually connected. If not issue an error. - */ - HdlTable = VECTOR_TABLE; - if (*(HdlTable + irq->name) != irq->hdl) { - return 0; - } - _CPU_ISR_Disable(level); - - /* - * Here is the code to uninstall an interrupt vector - * for the BSP : mask INT, .... - * ........................ - */ - - /* - * restore the default irq value - */ - *(HdlTable + irq->name) = default_int_handler; - - _CPU_ISR_Enable(level); - - return 1; -} - -void _ThreadProcessSignalsFromIrq (CPU_Exception_frame* ctx) -{ - /* - * Process pending signals that have not already been - * processed by _Thread_Displatch. This happens quite - * unfrequently : the ISR must have posted an action - * to the current running thread. - */ - if ( _Thread_Do_post_task_switch_extension || - _Thread_Executing->do_post_task_switch_extension ) { - _Thread_Executing->do_post_task_switch_extension = FALSE; - _API_extensions_Run_postswitch(); - } -} diff --git a/c/src/lib/libbsp/arm/arm_bare_bsp/irq/irq.h b/c/src/lib/libbsp/arm/arm_bare_bsp/irq/irq.h deleted file mode 100644 index 2d536d871b..0000000000 --- a/c/src/lib/libbsp/arm/arm_bare_bsp/irq/irq.h +++ /dev/null @@ -1,166 +0,0 @@ -/* irq.h - * - * This include file describe the data structure and the functions implemented - * by rtems to write interrupt handlers. - * - * Copyright (c) 2000 Canon Research Centre France SA. - * Emmanuel Raguet, mailto:raguet@crf.canon.fr - * - * The license and distribution terms for this file may be - * found in found in the file LICENSE in this distribution or at - * http://www.rtems.com/license/LICENSE. - * - */ - -#ifndef _IRQ_H_ -#define _IRQ_H_ - -#ifdef __cplusplus -extern "C" { -#endif - -/* - * Include some preprocessor value also used by assember code - */ - -#include <rtems.h> - -extern void default_int_handler(); -/*-------------------------------------------------------------------------+ -| Constants -+--------------------------------------------------------------------------*/ - - /* enum of the possible interrupt sources */ -typedef enum { - BSP_INT_1 = 0, - BSP_INT_2 = 1, - BSP_UART = 2, - BSP_MAX_INT = 3 -} rtems_irq_symbolic_name; - - /* define that can be useful (the values are just examples) */ -#define INTMASK 0x01 -#define VECTOR_TABLE 0x00 - -/* - * Type definition for RTEMS managed interrupts - */ -typedef unsigned char rtems_irq_level; -typedef unsigned char rtems_irq_trigger; - -struct __rtems_irq_connect_data__; /* forward declaratiuon */ - -typedef void (*rtems_irq_hdl) (void); -typedef void (*rtems_irq_enable) (const struct __rtems_irq_connect_data__*); -typedef void (*rtems_irq_disable) (const struct __rtems_irq_connect_data__*); -typedef int (*rtems_irq_is_enabled) (const struct __rtems_irq_connect_data__*); - -typedef struct __rtems_irq_connect_data__ { - /* - * IRQ line - */ - rtems_irq_symbolic_name name; - /* - * handler. See comment on handler properties below in function prototype. - */ - rtems_irq_hdl hdl; - /* - * function for enabling interrupts at device level (ONLY!). - * The BSP code will automatically enable it at i8259s level. - * RATIONALE : anyway such code has to exist in current driver code. - * It is usually called immediately AFTER connecting the interrupt handler. - * RTEMS may well need such a function when restoring normal interrupt - * processing after a debug session. - * - */ - rtems_irq_enable on; - /* - * function for disabling interrupts at device level (ONLY!). - * The code will disable it at i8259s level. RATIONALE : anyway - * such code has to exist for clean shutdown. It is usually called - * BEFORE disconnecting the interrupt. RTEMS may well need such - * a function when disabling normal interrupt processing for - * a debug session. May well be a NOP function. - */ - rtems_irq_disable off; - /* - * function enabling to know what interrupt may currently occur - * if someone manipulates the i8259s interrupt mask without care... - */ - rtems_irq_is_enabled isOn; - /* - * priority level at the vplus level - */ - rtems_irq_level irqLevel; - /* - * Trigger way : Rising or falling edge or High or low level - */ - rtems_irq_trigger irqTrigger; -} rtems_irq_connect_data; - -/*-------------------------------------------------------------------------+ -| Function Prototypes. -+--------------------------------------------------------------------------*/ -/* - * ------------------------ RTEMS Single Irq Handler Mngt Routines ---------------- - */ - -/* - * function to initialize the interrupt for a specific BSP - */ -void BSP_rtems_irq_mngt_init(); - -/* - * function to connect a particular irq handler. This hanlder will NOT be called - * directly as the result of the corresponding interrupt. Instead, a RTEMS - * irq prologue will be called that will : - * - * 1) save the C scratch registers, - * 2) switch to a interrupt stack if the interrupt is not nested, - * 3) store the current i8259s' interrupt masks - * 4) modify them to disable the current interrupt at 8259 level (and may - * be others depending on software priorities) - * 5) aknowledge the i8259s', - * 6) demask the processor, - * 7) call the application handler - * - * As a result the hdl function provided - * - * a) can perfectly be written is C, - * b) may also well directly call the part of the RTEMS API that can be used - * from interrupt level, - * c) It only responsible for handling the jobs that need to be done at - * the device level including (aknowledging/re-enabling the interrupt at device, - * level, getting the data,...) - * - * When returning from the function, the following will be performed by - * the RTEMS irq epilogue : - * - * 1) masks the interrupts again, - * 2) restore the original i8259s' interrupt masks - * 3) switch back on the orinal stack if needed, - * 4) perform rescheduling when necessary, - * 5) restore the C scratch registers... - * 6) restore initial execution flow - * - */ - -int BSP_install_rtems_irq_handler (const rtems_irq_connect_data*); -/* - * function to get the current RTEMS irq handler for ptr->name. It enables to - * define hanlder chain... - */ -int BSP_get_current_rtems_irq_handler (rtems_irq_connect_data* ptr); -/* - * function to get disconnect the RTEMS irq handler for ptr->name. - * This function checks that the value given is the current one for safety reason. - * The user can use the previous function to get it. - */ -int BSP_remove_rtems_irq_handler (const rtems_irq_connect_data*); - -#ifdef __cplusplus -} -#endif - -#endif /* _IRQ_H_ */ -/* end of include file */ diff --git a/c/src/lib/libbsp/arm/arm_bare_bsp/start/start.S b/c/src/lib/libbsp/arm/arm_bare_bsp/start/start.S deleted file mode 100644 index 9ee8522d2c..0000000000 --- a/c/src/lib/libbsp/arm/arm_bare_bsp/start/start.S +++ /dev/null @@ -1,142 +0,0 @@ -/* - * start.S : RTEMS entry point - * - * Copyright (C) 2000 Canon Research Centre France SA. - * Emmanuel Raguet, mailto:raguet@crf.canon.fr - * - * The license and distribution terms for this file may be - * found in found in the file LICENSE in this distribution or at - * http://www.rtems.com/license/LICENSE. - * - */ - -.equ ABORT_Stack, 0 -.equ IRQ_Stack, 0x100 -.equ FIQ_Stack, 0x200 -.equ SVC_Stack, 0x300 - -/* Some standard definitions...*/ - -.equ Mode_USR, 0x10 -.equ Mode_FIQ, 0x11 -.equ Mode_IRQ, 0x12 -.equ Mode_SVC, 0x13 -.equ Mode_ABT, 0x17 -.equ Mode_ABORT, 0x17 -.equ Mode_UNDEF, 0x1B -.equ Mode_SYS, 0x1F /*only available on ARM Arch. v4*/ - -.equ I_Bit, 0x80 -.equ F_Bit, 0x40 - - .text - .globl _start - -_start: - -/* - * Here is the code to initialize the low-level BSP environment - * (Chip Select, PLL, ....?) - */ - -/* Copy data from FLASH to RAM */ - LDR r0, =_initdata /* load address of region */ - LDR r1, =0x400000 /* execution address of region */ - LDR r2, =_edata /* copy execution address into r2 */ - -copy: - CMP r1, r2 /* loop whilst r1 < r2 */ - LDRLO r3, [r0], #4 - STRLO r3, [r1], #4 - BLO copy - -/* zero the bss */ - LDR r1, =__bss_end__ /* get end of ZI region */ - LDR r0, =__bss_start__ /* load base address of ZI region */ -zi_init: - MOV r2, #0 - CMP r0, r1 /* loop whilst r0 < r1 */ - STRLOT r2, [r0], #4 - BLO zi_init - -/* Load basic ARM7 interrupt table */ -VectorInit: - MOV R8, #0 - ADR R9, Vector_Init_Block - LDMIA R9!, {R0-R7} /* Copy the Vectors (8 words) */ - STMIA R8!, {R0-R7} - LDMIA R9!, {R0-R7} /* Copy the .long'ed addresses (8 words) */ - STMIA R8!, {R0-R7} - - B init2 - -/******************************************************* - standard exception vectors table - *** Must be located at address 0 -********************************************************/ - -Vector_Init_Block: - LDR PC, Reset_Addr - LDR PC, Undefined_Addr - LDR PC, SWI_Addr - LDR PC, Prefetch_Addr - LDR PC, Abort_Addr - NOP - LDR PC, IRQ_Addr - LDR PC, FIQ_Addr - - .globl Reset_Addr -Reset_Addr: .long _start -Undefined_Addr: .long Undefined_Handler -SWI_Addr: .long SWI_Handler -Prefetch_Addr: .long Prefetch_Handler -Abort_Addr: .long Abort_Handler - .long 0 -IRQ_Addr: .long IRQ_Handler -FIQ_Addr: .long FIQ_Handler - -/* The following handlers do not do anything useful */ - .globl Undefined_Handler -Undefined_Handler: - B Undefined_Handler - .globl SWI_Handler -SWI_Handler: - B SWI_Handler - .globl Prefetch_Handler -Prefetch_Handler: - B Prefetch_Handler - .globl Abort_Handler -Abort_Handler: - B Abort_Handler - .globl IRQ_Handler -IRQ_Handler: - B IRQ_Handler - .globl FIQ_Handler -FIQ_Handler: - B FIQ_Handler - -init2 : -/* --- Initialise stack pointer registers - Set up the ABORT stack pointer last and stay in SVC mode */ - MOV r0, #(Mode_ABORT | I_Bit | F_Bit) /* No interrupts */ - MSR cpsr, r0 - LDR sp, =ABORT_Stack - -/* Enter IRQ mode and set up the IRQ stack pointer */ - MOV r0, #Mode_IRQ | I_Bit | F_Bit /* No interrupts */ - MSR cpsr, r0 - LDR sp, =IRQ_Stack - -/* Enter FIQ mode and set up the FIQ stack pointer */ - MOV r0, #Mode_FIQ | I_Bit | F_Bit /* No interrupts */ - MSR cpsr, r0 - LDR sp, =FIQ_Stack - -/* Set up the SVC stack pointer last and stay in SVC mode */ - MOV r0, #Mode_SVC | I_Bit | F_Bit /* No interrupts */ - MSR cpsr, r0 - LDR sp, =SVC_Stack - -/* --- Now we enter the C code */ - - B boot_card diff --git a/c/src/lib/libbsp/arm/arm_bare_bsp/startup/bspstart.c b/c/src/lib/libbsp/arm/arm_bare_bsp/startup/bspstart.c deleted file mode 100644 index 416552d80c..0000000000 --- a/c/src/lib/libbsp/arm/arm_bare_bsp/startup/bspstart.c +++ /dev/null @@ -1,160 +0,0 @@ -/*-------------------------------------------------------------------------+ -| This file contains the ARM BSP startup package. It includes application, -| board, and monitor specific initialization and configuration. The generic CPU -| dependent initialization has been performed before this routine is invoked. -+--------------------------------------------------------------------------+ -| -| Copyright (c) 2000 Canon Research Centre France SA. -| Emmanuel Raguet, mailto:raguet@crf.canon.fr -| -| The license and distribution terms for this file may be -| found in found in the file LICENSE in this distribution or at -| http://www.rtems.com/license/LICENSE. -| -+--------------------------------------------------------------------------*/ - -#include <bsp.h> -#include <rtems/libcsupport.h> -#include <rtems/libio.h> - -#include <uart.h> - -/*-------------------------------------------------------------------------+ -| Global Variables -+--------------------------------------------------------------------------*/ - -/* - * must be initialized with the right address - */ -volatile unsigned long *Regs = (unsigned long*)0xdeadbeef; /* Chip registers */ - -extern uint32_t _end; /* End of BSS. Defined in 'linkcmds'. */ -/* - * Size of heap if it is 0 it will be dynamically defined by memory size, - * otherwise the value should be changed by binary patch - */ -uint32_t _heap_size = 0; - -/* Size of stack used during initialization. Defined in 'start.s'. */ -extern uint32_t _stack_size; - -uint32_t rtemsFreeMemStart; - /* Address of start of free memory - should be updated - after creating new partitions or regions. */ - -/* The original BSP configuration table from the application and our copy of it - with some changes. */ - -extern rtems_configuration_table Configuration; - rtems_configuration_table BSP_Configuration; - -rtems_cpu_table Cpu_table; /* CPU configuration table. */ -char *rtems_progname; /* Program name - from main(). */ - -/*-------------------------------------------------------------------------+ -| External Prototypes -+--------------------------------------------------------------------------*/ -extern void rtems_irq_mngt_init(void); -void bsp_libc_init( void *, uint32_t, int ); -void bsp_postdriver_hook(void); - -/*-------------------------------------------------------------------------+ -| Function: bsp_pretasking_hook -| Description: BSP pretasking hook. Called just before drivers are -| initialized. Used to setup libc and install any BSP -| extensions. NOTE: Must not use libc (to do io) from here, -| since drivers are not yet initialized. -| Global Variables: None. -| Arguments: None. -| Returns: Nothing. -+--------------------------------------------------------------------------*/ -void bsp_pretasking_hook(void) -{ - - if(_heap_size == 0) - { - _heap_size = 0x420000 - rtemsFreeMemStart; - } - - bsp_libc_init((void *)rtemsFreeMemStart, _heap_size, 0); - - rtemsFreeMemStart += _heap_size; /* HEAP_SIZE in KBytes */ - -#ifdef RTEMS_DEBUG - - rtems_debug_enable(RTEMS_DEBUG_ALL_MASK); - -#endif /* RTEMS_DEBUG */ - -} /* bsp_pretasking_hook */ - -/*-------------------------------------------------------------------------+ -| Function: bsp_start -| Description: Called before main is invoked. -| Global Variables: None. -| Arguments: None. -| Returns: Nothing. -+--------------------------------------------------------------------------*/ -void bsp_start_default( void ) -{ - rtemsFreeMemStart = (uint32_t)(&_end); /* &_end+_stack_size;*/ - /* set the value of start of free memory. */ - - /* If we don't have command line arguments set default program name. */ - - Cpu_table.pretasking_hook = bsp_pretasking_hook; /* init libc, etc. */ - Cpu_table.predriver_hook = NULL; /* use system's */ - Cpu_table.postdriver_hook = bsp_postdriver_hook; - Cpu_table.idle_task = NULL; - /* do not override system IDLE task */ - Cpu_table.do_zero_of_workspace = TRUE; - Cpu_table.interrupt_stack_size = 4096; - Cpu_table.extra_mpci_receive_server_stack = 0; - - /* Place RTEMS workspace at beginning of free memory. */ - BSP_Configuration.work_space_start = (void *)rtemsFreeMemStart; - - rtemsFreeMemStart += BSP_Configuration.work_space_size; - - /* - * Init rtems exceptions management - */ - rtems_exception_init_mngt(); - - /* - * Init rtems interrupt management - */ - rtems_irq_mngt_init(); - - /* - * The following information is very useful when debugging. - */ - -#if 0 - printk( "work_space_size = 0x%x\n", BSP_Configuration.work_space_size ); - printk( "maximum_extensions = 0x%x\n", BSP_Configuration.maximum_extensions ); - printk( "microseconds_per_tick = 0x%x\n", - BSP_Configuration.microseconds_per_tick ); - printk( "ticks_per_timeslice = 0x%x\n", - BSP_Configuration.ticks_per_timeslice ); - printk( "maximum_devices = 0x%x\n", BSP_Configuration.maximum_devices ); - printk( "number_of_device_drivers = 0x%x\n", - BSP_Configuration.number_of_device_drivers ); - printk( "Device_driver_table = 0x%x\n", - BSP_Configuration.Device_driver_table ); - - printk( "_heap_size = 0x%x\n", _heap_size ); - /* printk( "_stack_size = 0x%x\n", _stack_size );*/ - printk( "rtemsFreeMemStart = 0x%x\n", rtemsFreeMemStart ); - printk( "work_space_start = 0x%x\n", BSP_Configuration.work_space_start ); - printk( "work_space_size = 0x%x\n", BSP_Configuration.work_space_size ); -#endif - -} /* bsp_start */ - -/* - * By making this a weak alias for bsp_start_default, a brave soul - * can override the actual bsp_start routine used. - */ - -void bsp_start (void) __attribute__ ((weak, alias("bsp_start_default"))); diff --git a/c/src/lib/libbsp/arm/arm_bare_bsp/startup/exit.c b/c/src/lib/libbsp/arm/arm_bare_bsp/startup/exit.c deleted file mode 100644 index 03e240cc33..0000000000 --- a/c/src/lib/libbsp/arm/arm_bare_bsp/startup/exit.c +++ /dev/null @@ -1,39 +0,0 @@ -/*-------------------------------------------------------------------------+ -| exit.c - ARM BSP -+--------------------------------------------------------------------------+ -| Routines to shutdown and reboot the BSP. -+--------------------------------------------------------------------------+ -| -| Copyright (c) 2000 Canon Research Centre France SA. -| Emmanuel Raguet, mailto:raguet@crf.canon.fr -| -| The license and distribution terms for this file may be -| found in found in the file LICENSE in this distribution or at -| http://www.rtems.com/license/LICENSE. -| -+--------------------------------------------------------------------------*/ - -#include <stdio.h> -#include <bsp.h> -#include <rtems/bspIo.h> -#include <rtems/libio.h> - -void rtemsReboot (void) -{ - asm volatile ("b _start"); -} - -void bsp_cleanup(void) -{ - unsigned char ch; - static char line[]="\nEXECUTIVE SHUTDOWN! Any key to reboot..."; - /* - * AT this point, the console driver is disconnected => we must - * use polled output/input. This is exactly what printk - * does. - */ - printk("\n"); - printk(line); - ch = BSP_poll_char(); - rtemsReboot(); -} diff --git a/c/src/lib/libbsp/arm/arm_bare_bsp/startup/linkcmds b/c/src/lib/libbsp/arm/arm_bare_bsp/startup/linkcmds deleted file mode 100644 index e10d701531..0000000000 --- a/c/src/lib/libbsp/arm/arm_bare_bsp/startup/linkcmds +++ /dev/null @@ -1,316 +0,0 @@ -OUTPUT_FORMAT("elf32-littlearm", "elf32-bigarm", - "elf32-littlearm") -OUTPUT_ARCH(arm) -ENTRY(_start) -MEMORY { -/* Settings as submitted which won't match an arbitrary user board - and are not enough to link every test case so changed to link all tests. - FLASH (rx) : ORIGIN = 0x200000, LENGTH = 512K - RAM (!rx) : ORIGIN = 0x400000, LENGTH = 128K -*/ - FLASH (rx) : ORIGIN = 0x200000, LENGTH = 1024K - RAM (!rx) : ORIGIN = 0x600000, LENGTH = 128K -} - -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - /* Read-only sections, merged into text segment: */ -/* . = 0 + SIZEOF_HEADERS;*/ - .hash : { *(.hash) } > FLASH - .dynsym : { *(.dynsym) } > FLASH - .dynstr : { *(.dynstr) } > FLASH - .gnu.version : { *(.gnu.version) } > FLASH - .gnu.version_d : { *(.gnu.version_d) } > FLASH - .gnu.version_r : { *(.gnu.version_r) } > FLASH - .rel.init : { *(.rel.init) } > FLASH - .rela.init : { *(.rela.init) } > FLASH - .rel.text : - { - *(.rel.text) - *(.rel.text.*) - *(.rel.gnu.linkonce.t*) - } > FLASH - .rela.text : - { - *(.rela.text) - *(.rela.text.*) - *(.rela.gnu.linkonce.t*) - } > FLASH - .rel.fini : { *(.rel.fini) } > FLASH - .rela.fini : { *(.rela.fini) } > FLASH - .rel.rodata : - { - *(.rel.rodata) - *(.rel.rodata.*) - *(.rel.gnu.linkonce.r*) - } > FLASH - .rela.rodata : - { - *(.rela.rodata) - *(.rela.rodata.*) - *(.rela.gnu.linkonce.r*) - } > FLASH - .rel.data : - { - *(.rel.data) - *(.rel.data.*) - *(.rel.gnu.linkonce.d*) - } > FLASH - .rela.data : - { - *(.rela.data) - *(.rela.data.*) - *(.rela.gnu.linkonce.d*) - } > FLASH - .rel.ctors : { *(.rel.ctors) } > FLASH - .rela.ctors : { *(.rela.ctors) } > FLASH - .rel.dtors : { *(.rel.dtors) } > FLASH - .rela.dtors : { *(.rela.dtors) } > FLASH - .rel.got : { *(.rel.got) } > FLASH - .rela.got : { *(.rela.got) } > FLASH -} - -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - /* Read-only sections, merged into text segment: */ -/* . = 0 + SIZEOF_HEADERS;*/ - .hash : { *(.hash) } > FLASH - .dynsym : { *(.dynsym) } > FLASH - .dynstr : { *(.dynstr) } > FLASH - .gnu.version : { *(.gnu.version) } > FLASH - .gnu.version_d : { *(.gnu.version_d) } > FLASH - .gnu.version_r : { *(.gnu.version_r) } > FLASH - .rel.init : { *(.rel.init) } > FLASH - .rela.init : { *(.rela.init) } > FLASH - .rel.text : - { - *(.rel.text) - *(.rel.text.*) - *(.rel.gnu.linkonce.t*) - } > FLASH - .rela.text : - { - *(.rela.text) - *(.rela.text.*) - *(.rela.gnu.linkonce.t*) - } > FLASH - .rel.fini : { *(.rel.fini) } > FLASH - .rela.fini : { *(.rela.fini) } > FLASH - .rel.rodata : - { - *(.rel.rodata) - *(.rel.rodata.*) - *(.rel.gnu.linkonce.r*) - } > FLASH - .rela.rodata : - { - *(.rela.rodata) - *(.rela.rodata.*) - *(.rela.gnu.linkonce.r*) - } > FLASH - .rel.data : - { - *(.rel.data) - *(.rel.data.*) - *(.rel.gnu.linkonce.d*) - } > FLASH - .rela.data : - { - *(.rela.data) - *(.rela.data.*) - *(.rela.gnu.linkonce.d*) - } > FLASH - .rel.ctors : { *(.rel.ctors) } > FLASH - .rela.ctors : { *(.rela.ctors) } > FLASH - .rel.dtors : { *(.rel.dtors) } > FLASH - .rela.dtors : { *(.rela.dtors) } > FLASH - .rel.got : { *(.rel.got) } > FLASH - .rela.got : { *(.rela.got) } > FLASH - .rel.sdata : - { - *(.rel.sdata) - *(.rel.sdata.*) - *(.rel.gnu.linkonce.s*) - } > FLASH - .rela.sdata : - { - *(.rela.sdata) - *(.rela.sdata.*) - *(.rela.gnu.linkonce.s*) - } > FLASH - .rel.sbss : { *(.rel.sbss) } > FLASH - .rela.sbss : { *(.rela.sbss) } > FLASH - .rel.bss : { *(.rel.bss) } > FLASH - .rela.bss : { *(.rela.bss) } > FLASH - .rel.plt : { *(.rel.plt) } > FLASH - .rela.plt : { *(.rela.plt) } > FLASH - .init : - { - KEEP (*(.init)) - } > FLASH /*=0*/ - .plt : { *(.plt) } > FLASH - .text : - { - *(.text) - *(.text.*) - *(.stub) - - /* - * Special FreeBSD sysctl sections. - */ - . = ALIGN (16); - __start_set_sysctl_set = .; - *(set_sysctl_*); - __stop_set_sysctl_set = ABSOLUTE(.); - *(set_domain_*); - *(set_pseudo_*); - - /* .gnu.warning sections are handled specially by elf32.em. */ - *(.gnu.warning) - *(.gnu.linkonce.t*) - *(.glue_7t) *(.glue_7) - } > FLASH /*=0*/ - _etext = .; - PROVIDE (etext = .); - .fini : - { - KEEP (*(.fini)) - } > FLASH /*=0*/ - .rodata : { *(.rodata) *(.rodata.*) *(.gnu.linkonce.r*) } > FLASH - .rodata1 : { *(.rodata1) } > FLASH - _erodata = ABSOLUTE(.); - PROVIDE (erodata = ABSOLUTE(.)); - /* Adjust the address for the data segment. We want to adjust up to - the same address within the page on the next page up. */ - . = ALIGN(256); - _begdata = ALIGN(256); - .arm_end_text : - { - . = ALIGN(256); - _initdata = ALIGN(256); - } > FLASH - .data : AT (_begdata) - { - *(.data*) - *(.gnu.linkonce.d*) - *(.jcr) - SORT(CONSTRUCTORS) - } > RAM - .data1 : { *(.data1) } > RAM - .eh_frame : { *(.eh_frame) } > RAM - .gcc_except_table : { *(.gcc_except_table) } > RAM - .ctors : - { - /* gcc uses crtbegin.o to find the start of - the constructors, so we make sure it is - first. Because this is a wildcard, it - doesn't matter if the user does not - actually link against crtbegin.o; the - linker won't look for a file to match a - wildcard. The wildcard also means that it - doesn't matter which directory crtbegin.o - is in. */ - KEEP (*crtbegin.o(.ctors)) - /* We don't want to include the .ctor section from - from the crtend.o file until after the sorted ctors. - The .ctor section from the crtend file contains the - end of ctors marker and it must be last */ - KEEP (*(EXCLUDE_FILE (*crtend.o ) .ctors)) - KEEP (*(SORT(.ctors.*))) - KEEP (*(.ctors)) - } > RAM - .dtors : - { - KEEP (*crtbegin.o(.dtors)) - KEEP (*(EXCLUDE_FILE (*crtend.o ) .dtors)) - KEEP (*(SORT(.dtors.*))) - KEEP (*(.dtors)) - } > RAM - .got : { *(.got.plt) *(.got) } > RAM - .dynamic : { *(.dynamic) } > RAM - /* We want the small data sections together, so single-instruction offsets - can access them all, and initialized data all before uninitialized, so - we can shorten the on-disk segment size. */ - .sdata : - { - *(.sdata) - *(.sdata.*) - *(.gnu.linkonce.s.*) - } > RAM - .arm_data : - { - _edata = .; - __bss_start = .; - __bss_start__ = .; - } > RAM - .sbss : - { - *(.dynsbss) - *(.sbss) - *(.sbss.*) - *(.scommon) - } > RAM - .bss : - { - *(.dynbss) - *(.bss) - *(.bss.*) - *(.gnu.linkonce.b.*) - *(COMMON) - /* Align here to ensure that the .bss section occupies space up to - _end. Align after .bss to ensure correct alignment even if the - .bss section disappears because there are no input sections. */ - . = ALIGN(32 / 8); - } > RAM - . = ALIGN(32 / 8); - .arm_end : - { - _end = .; - _bss_end__ = . ; - __bss_end__ = . ; - __end__ = . ; - } > RAM - /* Stabs debugging sections. */ - .stab 0 : { *(.stab) } - .stabstr 0 : { *(.stabstr) } - .stab.excl 0 : { *(.stab.excl) } - .stab.exclstr 0 : { *(.stab.exclstr) } - .stab.index 0 : { *(.stab.index) } - .stab.indexstr 0 : { *(.stab.indexstr) } - .comment 0 : { *(.comment) } - /* DWARF debug sections. - Symbols in the DWARF debugging sections are relative to the beginning - of the section so we begin them at 0. */ - /* DWARF 1 */ - .debug 0 : { *(.debug) } - .line 0 : { *(.line) } - /* GNU DWARF 1 extensions */ - .debug_srcinfo 0 : { *(.debug_srcinfo) } - .debug_sfnames 0 : { *(.debug_sfnames) } - /* DWARF 1.1 and DWARF 2 */ - .debug_aranges 0 : { *(.debug_aranges) } - .debug_pubnames 0 : { *(.debug_pubnames) } - /* DWARF 2 */ - .debug_info 0 : { *(.debug_info) } - .debug_abbrev 0 : { *(.debug_abbrev) } - .debug_line 0 : { *(.debug_line) } - .debug_frame 0 : { *(.debug_frame) } - .debug_str 0 : { *(.debug_str) } - .debug_loc 0 : { *(.debug_loc) } - .debug_macinfo 0 : { *(.debug_macinfo) } - /* SGI/MIPS DWARF 2 extensions */ - .debug_weaknames 0 : { *(.debug_weaknames) } - .debug_funcnames 0 : { *(.debug_funcnames) } - .debug_typenames 0 : { *(.debug_typenames) } - .debug_varnames 0 : { *(.debug_varnames) } - /*.stack 0x80000 : { _stack = .; *(.stack) }*/ - /* These must appear regardless of . */ -} - - - - |