summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--c/src/exec/score/cpu/powerpc/other_cpu/Makefile.in90
-rw-r--r--c/src/exec/score/cpu/powerpc/other_cpu/README78
-rw-r--r--c/src/exec/score/cpu/powerpc/other_cpu/TODO8
-rw-r--r--c/src/exec/score/cpu/powerpc/other_cpu/c_isr.inl4
-rw-r--r--c/src/exec/score/cpu/powerpc/other_cpu/cpu.c853
-rw-r--r--c/src/exec/score/cpu/powerpc/other_cpu/cpu.h1200
-rw-r--r--c/src/exec/score/cpu/powerpc/other_cpu/cpu_asm.S809
-rw-r--r--c/src/exec/score/cpu/powerpc/other_cpu/irq_stub.S268
-rw-r--r--c/src/exec/score/cpu/powerpc/other_cpu/ppccache.c61
-rw-r--r--c/src/exec/score/cpu/powerpc/other_cpu/rtems.S132
10 files changed, 0 insertions, 3503 deletions
diff --git a/c/src/exec/score/cpu/powerpc/other_cpu/Makefile.in b/c/src/exec/score/cpu/powerpc/other_cpu/Makefile.in
deleted file mode 100644
index 9e6f49591a..0000000000
--- a/c/src/exec/score/cpu/powerpc/other_cpu/Makefile.in
+++ /dev/null
@@ -1,90 +0,0 @@
-#
-# $Id$
-#
-
-@SET_MAKE@
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-top_builddir = ../..
-subdir = powerpc/other_cpu
-
-RTEMS_ROOT = @RTEMS_ROOT@
-PROJECT_ROOT = @PROJECT_ROOT@
-
-VPATH = @srcdir@
-
-RELS = ../$(ARCH)/rtems-cpu.rel
-
-# C source names, if any, go here -- minus the .c
-C_PIECES = cpu ppccache
-C_FILES = $(C_PIECES:%=%.c)
-C_O_FILES = $(C_PIECES:%=${ARCH}/%.o)
-
-ROOT_H_PIECES =
-ROOT_H_FILES = $(ROOT_H_PIECES:%=$(srcdir)/%)
-RTEMS_SCORE_H_PIECES = cpu.h
-RTEMS_SCORE_H_FILES = $(RTEMS_SCORE_H_PIECES:%=$(srcdir)/%)
-H_PIECES = $(ROOT_H_PIECES) $(RTEMS_SCORE_H_PIECES)
-H_FILES = $(H_PIECES%=$(srcdir)/%)
-I_PIECES = c_isr
-I_FILES = $(I_PIECES:%=$(srcdir)/%.inl)
-
-# Assembly source names, if any, go here -- minus the .S
-S_PIECES = cpu_asm rtems # irq_stub
-S_FILES = $(S_PIECES:%=%.S)
-S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o)
-
-SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) $(EXTERNAL_H_FILES) \
- $(I_FILES)
-OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES)
-
-include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
-include $(RTEMS_ROOT)/make/leaf.cfg
-
-INSTALL_CHANGE = @INSTALL_CHANGE@
-mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs
-
-INSTALLDIRS = $(PROJECT_INCLUDE)/rtems/score $(PROJECT_INCLUDE)
-
-$(INSTALLDIRS):
- @$(mkinstalldirs) $(INSTALLDIRS)
-
-#
-# (OPTIONAL) Add local stuff here using +=
-#
-
-DEFINES +=
-CPPFLAGS +=
-CFLAGS += $(CFLAGS_OS_V)
-
-LD_PATHS +=
-LD_LIBS +=
-LDFLAGS +=
-
-#
-# Add your list of files to delete here. The config files
-# already know how to delete some stuff, so you may want
-# to just run 'make clean' first to see what gets missed.
-# 'make clobber' already includes 'make clean'
-#
-
-CLEAN_ADDITIONS +=
-CLOBBER_ADDITIONS +=
-
-../$(ARCH)/rtems-cpu.rel: $(OBJS)
- test -d ../$(ARCH) || mkdir ../$(ARCH)
- $(make-rel)
-
-all: ${ARCH} $(SRCS) preinstall $(OBJS) $(RELS)
-
-# Install the program(s), appending _g or _p as appropriate.
-# for include files, just use $(INSTALL_CHANGE)
-install: all
-
-preinstall: ${ARCH}
- @$(INSTALL_CHANGE) -m 644 $(RTEMS_SCORE_H_FILES) $(I_FILES) $(PROJECT_INCLUDE)/rtems/score
- @$(INSTALL_CHANGE) -m 644 $(ROOT_H_FILES) $(PROJECT_INCLUDE)
-
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- cd $(top_builddir) \
- && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
diff --git a/c/src/exec/score/cpu/powerpc/other_cpu/README b/c/src/exec/score/cpu/powerpc/other_cpu/README
deleted file mode 100644
index 0b87ac1ea7..0000000000
--- a/c/src/exec/score/cpu/powerpc/other_cpu/README
+++ /dev/null
@@ -1,78 +0,0 @@
-#
-# $Id$
-#
-
-There are various issues regarding this port:
-
-
-
-1) Legal
-
-This port is written by Andrew Bray <andy@i-cubed.co.uk>, and
-is copyright 1995 i-cubed ltd.
-
-This port was later updated by Joel Sherrill <joel@OARcorp.com>
-to test the support for the PPC603, PPC603e, and PPC604. This
-was tested on the PowerPC simulator PSIM and a VMEbus single board
-computer.
-
-2) CPU support.
-
-This release fully supports the PPC403GA, PPC403GB, PPC603, PPC603e,
-and PPC604 processors. A good faith attempt has been made to include
-support other models based upon available documentation.
-
-This port was originally written and tested on the PPC403GA (using
-software floating point). Current ports are tested on 60x CPUs
-using the PowerPC simulator PSIM.
-
-Andrew Bray received assistance during the initial porting effort
-from IBM and Blue Micro and we would like to gratefully acknowledge
-that help.
-
-The support for the PPC602 processor is incomplete as only sketchy
-data is currently available. Perhaps this model has been dropped.
-
-
-
-3) Application Binary INterface
-
-In the context of RTEMS, the ABI is of interest for the following
-aspects:
-
-a) Register usage. Which registers are used to provide static variable
- linkage, stack pointer etc.
-
-b) Function calling convention. How parameters are passed, how function
- variables should be invoked, how values are returned, etc.
-
-c) Stack frame layout.
-
-I am aware of a number of ABIs for the PowerPC:
-
-a) The PowerOpen ABI. This is the original Power ABI used on the RS/6000.
- This is the only ABI supported by versions of GCC before 2.7.0.
-
-b) The SVR4 ABI. This is the ABI defined by SunSoft for the Solaris port
- to the PowerPC.
-
-c) The Embedded ABI. This is an embedded ABI for PowerPC use, which has no
- operating system interface defined. It is promoted by SunSoft, Motorola,
- and Cygnus Support. Cygnus are porting the GNU toolchain to this ABI.
-
-d) GCC 2.7.0. This compiler is partway along the road to supporting the EABI,
- but is currently halfway in between.
-
-This port was built and tested using the PowerOpen ABI, with the following
-caveat: we used an ELF assembler and linker. So some attention may be
-required on the assembler files to get them through a traditional (XCOFF)
-PowerOpen assembler.
-
-This port contains support for the other ABIs, but this may prove to be
-incomplete as it is untested.
-
-The RTEMS PowerPC port supports EABI as the primary ABI. The powerpc-rtems
-GNU toolset configuration is EABI and .
-
-Andrew Bray, 4 December 1995
-Joel Sherrill, 16 July 1997
diff --git a/c/src/exec/score/cpu/powerpc/other_cpu/TODO b/c/src/exec/score/cpu/powerpc/other_cpu/TODO
deleted file mode 100644
index 64c96cb14c..0000000000
--- a/c/src/exec/score/cpu/powerpc/other_cpu/TODO
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# $Id$
-#
-
-Todo list:
-
-Maybe decode external interrupts like the HPPA does.
- See c/src/lib/libcpu/powerpc/ppc403/ictrl/* for implementation on ppc403
diff --git a/c/src/exec/score/cpu/powerpc/other_cpu/c_isr.inl b/c/src/exec/score/cpu/powerpc/other_cpu/c_isr.inl
deleted file mode 100644
index 706d4f7e4f..0000000000
--- a/c/src/exec/score/cpu/powerpc/other_cpu/c_isr.inl
+++ /dev/null
@@ -1,4 +0,0 @@
-RTEMS_INLINE_ROUTINE boolean _ISR_Is_in_progress( void )
-{
- return (_ISR_Nest_level != 0);
-}
diff --git a/c/src/exec/score/cpu/powerpc/other_cpu/cpu.c b/c/src/exec/score/cpu/powerpc/other_cpu/cpu.c
deleted file mode 100644
index 1e1a7379f0..0000000000
--- a/c/src/exec/score/cpu/powerpc/other_cpu/cpu.c
+++ /dev/null
@@ -1,853 +0,0 @@
-/*
- * PowerPC CPU Dependent Source
- *
- * Author: Andrew Bray <andy@i-cubed.co.uk>
- *
- * COPYRIGHT (c) 1995 by i-cubed ltd.
- *
- * To anyone who acknowledges that this file is provided "AS IS"
- * without any express or implied warranty:
- * permission to use, copy, modify, and distribute this file
- * for any purpose is hereby granted without fee, provided that
- * the above copyright notice and this notice appears in all
- * copies, and that the name of i-cubed limited not be used in
- * advertising or publicity pertaining to distribution of the
- * software without specific, written prior permission.
- * i-cubed limited makes no representations about the suitability
- * of this software for any purpose.
- *
- * Derived from c/src/exec/cpu/no_cpu/cpu.c:
- *
- * COPYRIGHT (c) 1989-1997.
- * On-Line Applications Research Corporation (OAR).
- * Copyright assigned to U.S. Government, 1994.
- *
- * The license and distribution terms for this file may be found in
- * the file LICENSE in this distribution or at
- * http://www.OARcorp.com/rtems/license.html.
- *
- * $Id$
- */
-
-#include <rtems/system.h>
-#include <rtems/score/isr.h>
-#include <rtems/score/context.h>
-#include <rtems/score/thread.h>
-#include <rtems/score/interr.h>
-
-/*
- * These are for testing purposes.
- */
-
-/* _CPU_Initialize
- *
- * This routine performs processor dependent initialization.
- *
- * INPUT PARAMETERS:
- * cpu_table - CPU table to initialize
- * thread_dispatch - address of disptaching routine
- */
-
-static void ppc_spurious(int, CPU_Interrupt_frame *);
-
-void _CPU_Initialize(
- rtems_cpu_table *cpu_table,
- void (*thread_dispatch) /* ignored on this CPU */
-)
-{
- proc_ptr handler = (proc_ptr)ppc_spurious;
- int i;
-#if (PPC_ABI != PPC_ABI_POWEROPEN)
- register unsigned32 r2 = 0;
-#if (PPC_ABI != PPC_ABI_GCC27)
- register unsigned32 r13 = 0;
-
- asm ("mr %0,13" : "=r" ((r13)) : "0" ((r13)));
- _CPU_IRQ_info.Default_r13 = r13;
-#endif
-
- asm ("mr %0,2" : "=r" ((r2)) : "0" ((r2)));
- _CPU_IRQ_info.Default_r2 = r2;
-#endif
-
- _CPU_IRQ_info.Nest_level = &_ISR_Nest_level;
- _CPU_IRQ_info.Disable_level = &_Thread_Dispatch_disable_level;
- _CPU_IRQ_info.Vector_table = _ISR_Vector_table;
-#if (PPC_ABI == PPC_ABI_POWEROPEN)
- _CPU_IRQ_info.Dispatch_r2 = ((unsigned32 *)_Thread_Dispatch)[1];
-#endif
- _CPU_IRQ_info.Switch_necessary = &_Context_Switch_necessary;
- _CPU_IRQ_info.Signal = &_ISR_Signals_to_thread_executing;
-
-#if (PPC_USE_SPRG)
- i = (int)&_CPU_IRQ_info;
- asm volatile("mtspr 0x113, %0" : "=r" (i) : "0" (i)); /* SPRG 3 */
-#endif
-
- /*
- * Store Msr Value in the IRQ info structure.
- */
- _CPU_MSR_Value(_CPU_IRQ_info.msr_initial);
-
-#if (PPC_USE_SPRG)
- i = _CPU_IRQ_info.msr_initial;
- asm volatile("mtspr 0x112, %0" : "=r" (i) : "0" (i)); /* SPRG 2 */
-#endif
-
- if ( cpu_table->spurious_handler )
- handler = (proc_ptr)cpu_table->spurious_handler;
-
- for (i = 0; i < PPC_INTERRUPT_MAX; i++)
- _ISR_Vector_table[i] = handler;
-
- _CPU_Table = *cpu_table;
-}
-
-/*PAGE
- *
- * _CPU_ISR_Calculate_level
- *
- * The PowerPC puts its interrupt enable status in the MSR register
- * which also contains things like endianness control. To be more
- * awkward, the layout varies from processor to processor. This
- * is why it was necessary to adopt a scheme which allowed the user
- * to specify specifically which interrupt sources were enabled.
- */
-
-unsigned32 _CPU_ISR_Calculate_level(
- unsigned32 new_level
-)
-{
- register unsigned32 new_msr = 0;
-
- /*
- * Set the critical interrupt enable bit
- */
-
-#if (PPC_HAS_RFCI)
- if ( !(new_level & PPC_INTERRUPT_LEVEL_CE) )
- new_msr |= PPC_MSR_CE;
-#endif
-
- if ( !(new_level & PPC_INTERRUPT_LEVEL_ME) )
- new_msr |= PPC_MSR_ME;
-
- if ( !(new_level & PPC_INTERRUPT_LEVEL_EE) )
- new_msr |= PPC_MSR_EE;
-
- return new_msr;
-}
-
-/*PAGE
- *
- * _CPU_ISR_Set_level
- *
- * This routine sets the requested level in the MSR.
- */
-
-void _CPU_ISR_Set_level(
- unsigned32 new_level
-)
-{
- register unsigned32 tmp = 0;
- register unsigned32 new_msr;
-
- new_msr = _CPU_ISR_Calculate_level( new_level );
-
- asm volatile (
- "mfmsr %0; andc %0,%0,%1; and %2, %2, %1; or %0, %0, %2; mtmsr %0" :
- "=&r" ((tmp)) :
- "r" ((PPC_MSR_DISABLE_MASK)), "r" ((new_msr)), "0" ((tmp))
- );
-}
-
-/*PAGE
- *
- * _CPU_ISR_Get_level
- *
- * This routine gets the current interrupt level from the MSR and
- * converts it to an RTEMS interrupt level.
- */
-
-unsigned32 _CPU_ISR_Get_level( void )
-{
- unsigned32 level = 0;
- unsigned32 msr;
-
- asm volatile("mfmsr %0" : "=r" ((msr)));
-
- msr &= PPC_MSR_DISABLE_MASK;
-
- /*
- * Set the critical interrupt enable bit
- */
-
-#if (PPC_HAS_RFCI)
- if ( !(msr & PPC_MSR_CE) )
- level |= PPC_INTERRUPT_LEVEL_CE;
-#endif
-
- if ( !(msr & PPC_MSR_ME) )
- level |= PPC_INTERRUPT_LEVEL_ME;
-
- if ( !(msr & PPC_MSR_EE) )
- level |= PPC_INTERRUPT_LEVEL_EE;
-
- return level;
-}
-
-/*PAGE
- *
- * _CPU_Context_Initialize
- */
-
-#if (PPC_ABI == PPC_ABI_POWEROPEN)
-#define CPU_MINIMUM_STACK_FRAME_SIZE 56
-#else /* PPC_ABI_SVR4 or PPC_ABI_EABI */
-#define CPU_MINIMUM_STACK_FRAME_SIZE 8
-#endif
-
-void _CPU_Context_Initialize(
- Context_Control *the_context,
- unsigned32 *stack_base,
- unsigned32 size,
- unsigned32 new_level,
- void *entry_point,
- boolean is_fp
-)
-{
- unsigned32 msr_value;
- unsigned32 sp;
-
- sp = (unsigned32)stack_base + size - CPU_MINIMUM_STACK_FRAME_SIZE;
- *((unsigned32 *)sp) = 0;
- the_context->gpr1 = sp;
-
- the_context->msr = _CPU_ISR_Calculate_level( new_level );
-
- /*
- * The FP bit of the MSR should only be enabled if this is a floating
- * point task. Unfortunately, the vfprintf_r routine in newlib
- * ends up pushing a floating point register regardless of whether or
- * not a floating point number is being printed. Serious restructuring
- * of vfprintf.c will be required to avoid this behavior. At this
- * time (7 July 1997), this restructuring is not being done.
- */
-
- /*if ( is_fp ) */
- the_context->msr |= PPC_MSR_FP;
-
- /*
- * Calculate the task's MSR value:
- *
- * + Set the exception prefix bit to point to the exception table
- * + Force the RI bit
- * + Use the DR and IR bits
- */
- _CPU_MSR_Value( msr_value );
- the_context->msr |= (msr_value & PPC_MSR_EP);
- the_context->msr |= PPC_MSR_RI;
- the_context->msr |= msr_value & (PPC_MSR_DR|PPC_MSR_IR);
-
-#if (PPC_ABI == PPC_ABI_POWEROPEN)
- { unsigned32 *desc = (unsigned32 *)entry_point;
-
- the_context->pc = desc[0];
- the_context->gpr2 = desc[1];
- }
-#endif
-
-#if (PPC_ABI == PPC_ABI_SVR4)
- { unsigned r13 = 0;
- asm volatile ("mr %0, 13" : "=r" ((r13)));
-
- the_context->pc = (unsigned32)entry_point;
- the_context->gpr13 = r13;
- }
-#endif
-
-#if (PPC_ABI == PPC_ABI_EABI)
- { unsigned32 r2 = 0;
- unsigned r13 = 0;
- asm volatile ("mr %0,2; mr %1,13" : "=r" ((r2)), "=r" ((r13)));
-
- the_context->pc = (unsigned32)entry_point;
- the_context->gpr2 = r2;
- the_context->gpr13 = r13;
- }
-#endif
-}
-
-
-/* _CPU_ISR_install_vector
- *
- * This kernel routine installs the RTEMS handler for the
- * specified vector.
- *
- * Input parameters:
- * vector - interrupt vector number
- * old_handler - former ISR for this vector number
- * new_handler - replacement ISR for this vector number
- *
- * Output parameters: NONE
- *
- */
-
-void _CPU_ISR_install_vector(
- unsigned32 vector,
- proc_ptr new_handler,
- proc_ptr *old_handler
-)
-{
- proc_ptr ignored;
- *old_handler = _ISR_Vector_table[ vector ];
-
- /*
- * If the interrupt vector table is a table of pointer to isr entry
- * points, then we need to install the appropriate RTEMS interrupt
- * handler for this vector number.
- */
-
- /*
- * Install the wrapper so this ISR can be invoked properly.
- */
- if (_CPU_Table.exceptions_in_RAM)
- _CPU_ISR_install_raw_handler( vector, _ISR_Handler, &ignored );
-
- /*
- * We put the actual user ISR address in '_ISR_vector_table'. This will
- * be used by the _ISR_Handler so the user gets control.
- */
-
- _ISR_Vector_table[ vector ] = new_handler ? (ISR_Handler_entry)new_handler :
- _CPU_Table.spurious_handler ?
- (ISR_Handler_entry)_CPU_Table.spurious_handler :
- (ISR_Handler_entry)ppc_spurious;
-}
-
-/*PAGE
- *
- * _CPU_Install_interrupt_stack
- */
-
-void _CPU_Install_interrupt_stack( void )
-{
-#if (PPC_ABI == PPC_ABI_POWEROPEN || PPC_ABI == PPC_ABI_GCC27)
- _CPU_IRQ_info.Stack = _CPU_Interrupt_stack_high - 56;
-#else
- _CPU_IRQ_info.Stack = _CPU_Interrupt_stack_high - 8;
-#endif
-}
-
-/* Handle a spurious interrupt */
-static void ppc_spurious(int v, CPU_Interrupt_frame *i)
-{
-#if 0
- printf("Spurious interrupt on vector %d from %08.8x\n",
- v, i->pc);
-#endif
-#ifdef ppc403
- if (v == PPC_IRQ_EXTERNAL)
- {
- register int r = 0;
-
- asm volatile("mtdcr 0x42, %0" :
- "=&r" ((r)) : "0" ((r))); /* EXIER */
- }
- else if (v == PPC_IRQ_PIT)
- {
- register int r = 0x08000000;
-
- asm volatile("mtspr 0x3d8, %0" :
- "=&r" ((r)) : "0" ((r))); /* TSR */
- }
- else if (v == PPC_IRQ_FIT)
- {
- register int r = 0x04000000;
-
- asm volatile("mtspr 0x3d8, %0" :
- "=&r" ((r)) : "0" ((r))); /* TSR */
- }
-#endif
-}
-
-void _CPU_Fatal_error(unsigned32 _error)
-{
- asm volatile ("mr 3, %0" : : "r" ((_error)));
- asm volatile ("tweq 5,5");
- asm volatile ("li 0,0; mtmsr 0");
- while (1) ;
-}
-
-#define PPC_SYNCHRONOUS_TRAP_BIT_MASK 0x100
-#define PPC_ASYNCHRONOUS_TRAP( _trap ) (_trap)
-#define PPC_SYNCHRONOUS_TRAP ( _trap ) ((_trap)+PPC_SYNCHRONOUS_TRAP_BIT_MASK)
-#define PPC_REAL_TRAP_NUMBER ( _trap ) ((_trap)%PPC_SYNCHRONOUS_TRAP_BIT_MASK)
-
-
-const CPU_Trap_table_entry _CPU_Trap_slot_template = {
-
-#if (PPC_ABI == PPC_ABI_POWEROPEN || PPC_ABI == PPC_ABI_GCC27)
-#error " Vector install not tested."
-#if (PPC_HAS_FPU)
-#error " Vector install not tested."
- 0x9421feb0, /* stwu r1, -(20*4 + 18*8 + IP_END)(r1) */
-#else
-#error " Vector install not tested."
- 0x9421ff40, /* stwu r1, -(20*4 + IP_END)(r1) */
-#endif
-#else
- 0x9421ff90, /* stwu r1, -(IP_END)(r1) */
-#endif
-
- 0x90010008, /* stw %r0, IP_0(%r1) */
- 0x38000000, /* li %r0, PPC_IRQ */
- 0x48000002 /* ba PROC (_ISR_Handler) */
-};
-
-#if defined(mpc860) || defined(mpc821)
-const CPU_Trap_table_entry _CPU_Trap_slot_template_m860 = {
- 0x7c0803ac, /* mtlr %r0 */
- 0x81210028, /* lwz %r9, IP_9(%r1) */
- 0x38000000, /* li %r0, PPC_IRQ */
- 0x48000002 /* b PROC (_ISR_Handler) */
-};
-#endif /* mpc860 */
-
-unsigned32 ppc_exception_vector_addr(
- unsigned32 vector
-);
-
-
-/*PAGE
- *
- * _CPU_ISR_install_raw_handler
- *
- * This routine installs the specified handler as a "raw" non-executive
- * supported trap handler (a.k.a. interrupt service routine).
- *
- * Input Parameters:
- * vector - trap table entry number plus synchronous
- * vs. asynchronous information
- * new_handler - address of the handler to be installed
- * old_handler - pointer to an address of the handler previously installed
- *
- * Output Parameters: NONE
- * *new_handler - address of the handler previously installed
- *
- * NOTE:
- *
- * This routine is based on the SPARC routine _CPU_ISR_install_raw_handler.
- * Install a software trap handler as an executive interrupt handler
- * (which is desirable since RTEMS takes care of window and register issues),
- * then the executive needs to know that the return address is to the trap
- * rather than the instruction following the trap.
- *
- */
-
-void _CPU_ISR_install_raw_handler(
- unsigned32 vector,
- proc_ptr new_handler,
- proc_ptr *old_handler
-)
-{
- unsigned32 real_vector;
- CPU_Trap_table_entry *slot;
- unsigned32 u32_handler=0;
-
- /*
- * Get the "real" trap number for this vector ignoring the synchronous
- * versus asynchronous indicator included with our vector numbers.
- */
-
- real_vector = vector;
-
- /*
- * Get the current base address of the trap table and calculate a pointer
- * to the slot we are interested in.
- */
- slot = (CPU_Trap_table_entry *)ppc_exception_vector_addr( real_vector );
-
- /*
- * Get the address of the old_handler from the trap table.
- *
- * NOTE: The old_handler returned will be bogus if it does not follow
- * the RTEMS model.
- */
-
-#define HIGH_BITS_MASK 0xFFFFFC00
-#define HIGH_BITS_SHIFT 10
-#define LOW_BITS_MASK 0x000003FF
-
- if (slot->stwu_r1 == _CPU_Trap_slot_template.stwu_r1) {
- /*
- * Set u32_handler = to target address
- */
- u32_handler = slot->b_Handler & 0x03fffffc;
-
- /* IMD FIX: sign extend address fragment... */
- if (u32_handler & 0x02000000) {
- u32_handler |= 0xfc000000;
- }
-
- *old_handler = (proc_ptr) u32_handler;
- } else
-/* There are two kinds of handlers for the MPC860. One is the 'standard'
- * one like above. The other is for the cascaded interrupts from the SIU
- * and CPM. Therefore we must check for the alternate one if the standard
- * one is not present
- */
-#if defined(mpc860) || defined(mpc821)
- if (slot->stwu_r1 == _CPU_Trap_slot_template_m860.stwu_r1) {
- /*
- * Set u32_handler = to target address
- */
- u32_handler = slot->b_Handler & 0x03fffffc;
- *old_handler = (proc_ptr) u32_handler;
- } else
-#endif /* mpc860 */
-
- *old_handler = 0;
-
- /*
- * Copy the template to the slot and then fix it.
- */
-#if defined(mpc860) || defined(mpc821)
- if (vector >= PPC_IRQ_IRQ0)
- *slot = _CPU_Trap_slot_template_m860;
- else
-#endif /* mpc860 */
- *slot = _CPU_Trap_slot_template;
-
- u32_handler = (unsigned32) new_handler;
-
- /*
- * IMD FIX: insert address fragment only (bits 6..29)
- * therefore check for proper address range
- * and remove unwanted bits
- */
- if ((u32_handler & 0xfc000000) == 0xfc000000) {
- u32_handler &= ~0xfc000000;
- }
- else if ((u32_handler & 0xfc000000) != 0x00000000) {
- _Internal_error_Occurred(INTERNAL_ERROR_CORE,
- TRUE,
- u32_handler);
- }
-
- slot->b_Handler |= u32_handler;
-
- slot->li_r0_IRQ |= vector;
-
- _CPU_Data_Cache_Block_Flush( slot );
-}
-
-unsigned32 ppc_exception_vector_addr(
- unsigned32 vector
-)
-{
-#if (!PPC_HAS_EVPR)
- unsigned32 Msr;
-#endif
- unsigned32 Top = 0;
- unsigned32 Offset = 0x000;
-
-#if (PPC_HAS_EXCEPTION_PREFIX)
- _CPU_MSR_Value ( Msr );
- if ( ( Msr & PPC_MSR_EP) != 0 ) /* Vectors at FFFx_xxxx */
- Top = 0xfff00000;
-#elif (PPC_HAS_EVPR)
- asm volatile( "mfspr %0,0x3d6" : "=r" (Top)); /* EVPR */
- Top = Top & 0xffff0000;
-#endif
-
- switch ( vector ) {
- case PPC_IRQ_SYSTEM_RESET: /* on 40x aka PPC_IRQ_CRIT */
- Offset = 0x00100;
- break;
- case PPC_IRQ_MCHECK:
- Offset = 0x00200;
- break;
- case PPC_IRQ_PROTECT:
- Offset = 0x00300;
- break;
- case PPC_IRQ_ISI:
- Offset = 0x00400;
- break;
- case PPC_IRQ_EXTERNAL:
- Offset = 0x00500;
- break;
- case PPC_IRQ_ALIGNMENT:
- Offset = 0x00600;
- break;
- case PPC_IRQ_PROGRAM:
- Offset = 0x00700;
- break;
- case PPC_IRQ_NOFP:
- Offset = 0x00800;
- break;
- case PPC_IRQ_DECREMENTER:
- Offset = 0x00900;
- break;
- case PPC_IRQ_RESERVED_A:
- Offset = 0x00a00;
- break;
- case PPC_IRQ_RESERVED_B:
- Offset = 0x00b00;
- break;
- case PPC_IRQ_SCALL:
- Offset = 0x00c00;
- break;
- case PPC_IRQ_TRACE:
- Offset = 0x00d00;
- break;
- case PPC_IRQ_FP_ASST:
- Offset = 0x00e00;
- break;
-
-#if defined(ppc403)
-
-/* PPC_IRQ_CRIT is the same vector as PPC_IRQ_RESET
- case PPC_IRQ_CRIT:
- Offset = 0x00100;
- break;
-*/
- case PPC_IRQ_PIT:
- Offset = 0x01000;
- break;
- case PPC_IRQ_FIT:
- Offset = 0x01010;
- break;
- case PPC_IRQ_WATCHDOG:
- Offset = 0x01020;
- break;
- case PPC_IRQ_DEBUG:
- Offset = 0x02000;
- break;
-
-#elif defined(ppc601)
- case PPC_IRQ_TRACE:
- Offset = 0x02000;
- break;
-
-#elif defined(ppc603)
- case PPC_IRQ_TRANS_MISS:
- Offset = 0x1000;
- break;
- case PPC_IRQ_DATA_LOAD:
- Offset = 0x1100;
- break;
- case PPC_IRQ_DATA_STORE:
- Offset = 0x1200;
- break;
- case PPC_IRQ_ADDR_BRK:
- Offset = 0x1300;
- break;
- case PPC_IRQ_SYS_MGT:
- Offset = 0x1400;
- break;
-
-#elif defined(ppc603e)
- case PPC_TLB_INST_MISS:
- Offset = 0x1000;
- break;
- case PPC_TLB_LOAD_MISS:
- Offset = 0x1100;
- break;
- case PPC_TLB_STORE_MISS:
- Offset = 0x1200;
- break;
- case PPC_IRQ_ADDRBRK:
- Offset = 0x1300;
- break;
- case PPC_IRQ_SYS_MGT:
- Offset = 0x1400;
- break;
-
-#elif defined(ppc604)
- case PPC_IRQ_ADDR_BRK:
- Offset = 0x1300;
- break;
- case PPC_IRQ_SYS_MGT:
- Offset = 0x1400;
- break;
-
-#elif defined(mpc860) || defined(mpc821)
- case PPC_IRQ_EMULATE:
- Offset = 0x1000;
- break;
- case PPC_IRQ_INST_MISS:
- Offset = 0x1100;
- break;
- case PPC_IRQ_DATA_MISS:
- Offset = 0x1200;
- break;
- case PPC_IRQ_INST_ERR:
- Offset = 0x1300;
- break;
- case PPC_IRQ_DATA_ERR:
- Offset = 0x1400;
- break;
- case PPC_IRQ_DATA_BPNT:
- Offset = 0x1c00;
- break;
- case PPC_IRQ_INST_BPNT:
- Offset = 0x1d00;
- break;
- case PPC_IRQ_IO_BPNT:
- Offset = 0x1e00;
- break;
- case PPC_IRQ_DEV_PORT:
- Offset = 0x1f00;
- break;
- case PPC_IRQ_IRQ0:
- Offset = 0x2000;
- break;
- case PPC_IRQ_LVL0:
- Offset = 0x2040;
- break;
- case PPC_IRQ_IRQ1:
- Offset = 0x2080;
- break;
- case PPC_IRQ_LVL1:
- Offset = 0x20c0;
- break;
- case PPC_IRQ_IRQ2:
- Offset = 0x2100;
- break;
- case PPC_IRQ_LVL2:
- Offset = 0x2140;
- break;
- case PPC_IRQ_IRQ3:
- Offset = 0x2180;
- break;
- case PPC_IRQ_LVL3:
- Offset = 0x21c0;
- break;
- case PPC_IRQ_IRQ4:
- Offset = 0x2200;
- break;
- case PPC_IRQ_LVL4:
- Offset = 0x2240;
- break;
- case PPC_IRQ_IRQ5:
- Offset = 0x2280;
- break;
- case PPC_IRQ_LVL5:
- Offset = 0x22c0;
- break;
- case PPC_IRQ_IRQ6:
- Offset = 0x2300;
- break;
- case PPC_IRQ_LVL6:
- Offset = 0x2340;
- break;
- case PPC_IRQ_IRQ7:
- Offset = 0x2380;
- break;
- case PPC_IRQ_LVL7:
- Offset = 0x23c0;
- break;
- case PPC_IRQ_CPM_RESERVED_0:
- Offset = 0x2400;
- break;
- case PPC_IRQ_CPM_PC4:
- Offset = 0x2410;
- break;
- case PPC_IRQ_CPM_PC5:
- Offset = 0x2420;
- break;
- case PPC_IRQ_CPM_SMC2:
- Offset = 0x2430;
- break;
- case PPC_IRQ_CPM_SMC1:
- Offset = 0x2440;
- break;
- case PPC_IRQ_CPM_SPI:
- Offset = 0x2450;
- break;
- case PPC_IRQ_CPM_PC6:
- Offset = 0x2460;
- break;
- case PPC_IRQ_CPM_TIMER4:
- Offset = 0x2470;
- break;
- case PPC_IRQ_CPM_RESERVED_8:
- Offset = 0x2480;
- break;
- case PPC_IRQ_CPM_PC7:
- Offset = 0x2490;
- break;
- case PPC_IRQ_CPM_PC8:
- Offset = 0x24a0;
- break;
- case PPC_IRQ_CPM_PC9:
- Offset = 0x24b0;
- break;
- case PPC_IRQ_CPM_TIMER3:
- Offset = 0x24c0;
- break;
- case PPC_IRQ_CPM_RESERVED_D:
- Offset = 0x24d0;
- break;
- case PPC_IRQ_CPM_PC10:
- Offset = 0x24e0;
- break;
- case PPC_IRQ_CPM_PC11:
- Offset = 0x24f0;
- break;
- case PPC_IRQ_CPM_I2C:
- Offset = 0x2500;
- break;
- case PPC_IRQ_CPM_RISC_TIMER:
- Offset = 0x2510;
- break;
- case PPC_IRQ_CPM_TIMER2:
- Offset = 0x2520;
- break;
- case PPC_IRQ_CPM_RESERVED_13:
- Offset = 0x2530;
- break;
- case PPC_IRQ_CPM_IDMA2:
- Offset = 0x2540;
- break;
- case PPC_IRQ_CPM_IDMA1:
- Offset = 0x2550;
- break;
- case PPC_IRQ_CPM_SDMA_ERROR:
- Offset = 0x2560;
- break;
- case PPC_IRQ_CPM_PC12:
- Offset = 0x2570;
- break;
- case PPC_IRQ_CPM_PC13:
- Offset = 0x2580;
- break;
- case PPC_IRQ_CPM_TIMER1:
- Offset = 0x2590;
- break;
- case PPC_IRQ_CPM_PC14:
- Offset = 0x25a0;
- break;
- case PPC_IRQ_CPM_SCC4:
- Offset = 0x25b0;
- break;
- case PPC_IRQ_CPM_SCC3:
- Offset = 0x25c0;
- break;
- case PPC_IRQ_CPM_SCC2:
- Offset = 0x25d0;
- break;
- case PPC_IRQ_CPM_SCC1:
- Offset = 0x25e0;
- break;
- case PPC_IRQ_CPM_PC15:
- Offset = 0x25f0;
- break;
-#endif
-
- }
- Top += Offset;
- return Top;
-}
-
diff --git a/c/src/exec/score/cpu/powerpc/other_cpu/cpu.h b/c/src/exec/score/cpu/powerpc/other_cpu/cpu.h
deleted file mode 100644
index 2a502d0745..0000000000
--- a/c/src/exec/score/cpu/powerpc/other_cpu/cpu.h
+++ /dev/null
@@ -1,1200 +0,0 @@
-/* cpu.h
- *
- * This include file contains information pertaining to the PowerPC
- * processor.
- *
- * Author: Andrew Bray <andy@i-cubed.co.uk>
- *
- * COPYRIGHT (c) 1995 by i-cubed ltd.
- *
- * To anyone who acknowledges that this file is provided "AS IS"
- * without any express or implied warranty:
- * permission to use, copy, modify, and distribute this file
- * for any purpose is hereby granted without fee, provided that
- * the above copyright notice and this notice appears in all
- * copies, and that the name of i-cubed limited not be used in
- * advertising or publicity pertaining to distribution of the
- * software without specific, written prior permission.
- * i-cubed limited makes no representations about the suitability
- * of this software for any purpose.
- *
- * Derived from c/src/exec/cpu/no_cpu/cpu.h:
- *
- * COPYRIGHT (c) 1989-1997.
- * On-Line Applications Research Corporation (OAR).
- * Copyright assigned to U.S. Government, 1994.
- *
- * The license and distribution terms for this file may in
- * the file LICENSE in this distribution or at
- * http://www.OARcorp.com/rtems/license.html.
- *
- * $Id$
- */
-
-#ifndef __CPU_h
-#define __CPU_h
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#include <rtems/score/ppc.h> /* pick up machine definitions */
-#ifndef ASM
-struct CPU_Interrupt_frame;
-typedef void ( *ppc_isr_entry )( int, struct CPU_Interrupt_frame * );
-
-#include <rtems/score/ppctypes.h>
-#endif
-
-/* conditional compilation parameters */
-
-/*
- * Should the calls to _Thread_Enable_dispatch be inlined?
- *
- * If TRUE, then they are inlined.
- * If FALSE, then a subroutine call is made.
- *
- * Basically this is an example of the classic trade-off of size
- * versus speed. Inlining the call (TRUE) typically increases the
- * size of RTEMS while speeding up the enabling of dispatching.
- * [NOTE: In general, the _Thread_Dispatch_disable_level will
- * only be 0 or 1 unless you are in an interrupt handler and that
- * interrupt handler invokes the executive.] When not inlined
- * something calls _Thread_Enable_dispatch which in turns calls
- * _Thread_Dispatch. If the enable dispatch is inlined, then
- * one subroutine call is avoided entirely.]
- */
-
-#define CPU_INLINE_ENABLE_DISPATCH FALSE
-
-/*
- * Should the body of the search loops in _Thread_queue_Enqueue_priority
- * be unrolled one time? In unrolled each iteration of the loop examines
- * two "nodes" on the chain being searched. Otherwise, only one node
- * is examined per iteration.
- *
- * If TRUE, then the loops are unrolled.
- * If FALSE, then the loops are not unrolled.
- *
- * The primary factor in making this decision is the cost of disabling
- * and enabling interrupts (_ISR_Flash) versus the cost of rest of the
- * body of the loop. On some CPUs, the flash is more expensive than
- * one iteration of the loop body. In this case, it might be desirable
- * to unroll the loop. It is important to note that on some CPUs, this
- * code is the longest interrupt disable period in RTEMS. So it is
- * necessary to strike a balance when setting this parameter.
- */
-
-#define CPU_UNROLL_ENQUEUE_PRIORITY FALSE
-
-/*
- * Does RTEMS manage a dedicated interrupt stack in software?
- *
- * If TRUE, then a stack is allocated in _Interrupt_Manager_initialization.
- * If FALSE, nothing is done.
- *
- * If the CPU supports a dedicated interrupt stack in hardware,
- * then it is generally the responsibility of the BSP to allocate it
- * and set it up.
- *
- * If the CPU does not support a dedicated interrupt stack, then
- * the porter has two options: (1) execute interrupts on the
- * stack of the interrupted task, and (2) have RTEMS manage a dedicated
- * interrupt stack.
- *
- * If this is TRUE, CPU_ALLOCATE_INTERRUPT_STACK should also be TRUE.
- *
- * Only one of CPU_HAS_SOFTWARE_INTERRUPT_STACK and
- * CPU_HAS_HARDWARE_INTERRUPT_STACK should be set to TRUE. It is
- * possible that both are FALSE for a particular CPU. Although it
- * is unclear what that would imply about the interrupt processing
- * procedure on that CPU.
- */
-
-#define CPU_HAS_SOFTWARE_INTERRUPT_STACK FALSE
-
-/*
- * Does this CPU have hardware support for a dedicated interrupt stack?
- *
- * If TRUE, then it must be installed during initialization.
- * If FALSE, then no installation is performed.
- *
- * If this is TRUE, CPU_ALLOCATE_INTERRUPT_STACK should also be TRUE.
- *
- * Only one of CPU_HAS_SOFTWARE_INTERRUPT_STACK and
- * CPU_HAS_HARDWARE_INTERRUPT_STACK should be set to TRUE. It is
- * possible that both are FALSE for a particular CPU. Although it
- * is unclear what that would imply about the interrupt processing
- * procedure on that CPU.
- */
-
-/*
- * ACB: This is a lie, but it gets us a handle on a call to set up
- * a variable derived from the top of the interrupt stack.
- */
-
-#define CPU_HAS_HARDWARE_INTERRUPT_STACK TRUE
-
-/*
- * Does RTEMS allocate a dedicated interrupt stack in the Interrupt Manager?
- *
- * If TRUE, then the memory is allocated during initialization.
- * If FALSE, then the memory is allocated during initialization.
- *
- * This should be TRUE is CPU_HAS_SOFTWARE_INTERRUPT_STACK is TRUE
- * or CPU_INSTALL_HARDWARE_INTERRUPT_STACK is TRUE.
- */
-
-#define CPU_ALLOCATE_INTERRUPT_STACK TRUE
-
-/*
- * Does the RTEMS invoke the user's ISR with the vector number and
- * a pointer to the saved interrupt frame (1) or just the vector
- * number (0)?
- */
-
-#define CPU_ISR_PASSES_FRAME_POINTER 1
-
-/*
- * Does the CPU have hardware floating point?
- *
- * If TRUE, then the RTEMS_FLOATING_POINT task attribute is supported.
- * If FALSE, then the RTEMS_FLOATING_POINT task attribute is ignored.
- *
- * If there is a FP coprocessor such as the i387 or mc68881, then
- * the answer is TRUE.
- *
- * The macro name "PPC_HAS_FPU" should be made CPU specific.
- * It indicates whether or not this CPU model has FP support. For
- * example, it would be possible to have an i386_nofp CPU model
- * which set this to false to indicate that you have an i386 without
- * an i387 and wish to leave floating point support out of RTEMS.
- */
-
-#if ( PPC_HAS_FPU == 1 )
-#define CPU_HARDWARE_FP TRUE
-#else
-#define CPU_HARDWARE_FP FALSE
-#endif
-
-/*
- * Are all tasks RTEMS_FLOATING_POINT tasks implicitly?
- *
- * If TRUE, then the RTEMS_FLOATING_POINT task attribute is assumed.
- * If FALSE, then the RTEMS_FLOATING_POINT task attribute is followed.
- *
- * So far, the only CPU in which this option has been used is the
- * HP PA-RISC. The HP C compiler and gcc both implicitly use the
- * floating point registers to perform integer multiplies. If
- * a function which you would not think utilize the FP unit DOES,
- * then one can not easily predict which tasks will use the FP hardware.
- * In this case, this option should be TRUE.
- *
- * If CPU_HARDWARE_FP is FALSE, then this should be FALSE as well.
- */
-
-#define CPU_ALL_TASKS_ARE_FP FALSE
-
-/*
- * Should the IDLE task have a floating point context?
- *
- * If TRUE, then the IDLE task is created as a RTEMS_FLOATING_POINT task
- * and it has a floating point context which is switched in and out.
- * If FALSE, then the IDLE task does not have a floating point context.
- *
- * Setting this to TRUE negatively impacts the time required to preempt
- * the IDLE task from an interrupt because the floating point context
- * must be saved as part of the preemption.
- */
-
-#define CPU_IDLE_TASK_IS_FP FALSE
-
-/*
- * Should the saving of the floating point registers be deferred
- * until a context switch is made to another different floating point
- * task?
- *
- * If TRUE, then the floating point context will not be stored until
- * necessary. It will remain in the floating point registers and not
- * disturned until another floating point task is switched to.
- *
- * If FALSE, then the floating point context is saved when a floating
- * point task is switched out and restored when the next floating point
- * task is restored. The state of the floating point registers between
- * those two operations is not specified.
- *
- * If the floating point context does NOT have to be saved as part of
- * interrupt dispatching, then it should be safe to set this to TRUE.
- *
- * Setting this flag to TRUE results in using a different algorithm
- * for deciding when to save and restore the floating point context.
- * The deferred FP switch algorithm minimizes the number of times
- * the FP context is saved and restored. The FP context is not saved
- * until a context switch is made to another, different FP task.
- * Thus in a system with only one FP task, the FP context will never
- * be saved or restored.
- */
-/*
- * ACB Note: This could make debugging tricky..
- */
-
-#define CPU_USE_DEFERRED_FP_SWITCH TRUE
-
-/*
- * Does this port provide a CPU dependent IDLE task implementation?
- *
- * If TRUE, then the routine _CPU_Thread_Idle_body
- * must be provided and is the default IDLE thread body instead of
- * _CPU_Thread_Idle_body.
- *
- * If FALSE, then use the generic IDLE thread body if the BSP does
- * not provide one.
- *
- * This is intended to allow for supporting processors which have
- * a low power or idle mode. When the IDLE thread is executed, then
- * the CPU can be powered down.
- *
- * The order of precedence for selecting the IDLE thread body is:
- *
- * 1. BSP provided
- * 2. CPU dependent (if provided)
- * 3. generic (if no BSP and no CPU dependent)
- */
-
-#define CPU_PROVIDES_IDLE_THREAD_BODY FALSE
-
-/*
- * Does the stack grow up (toward higher addresses) or down
- * (toward lower addresses)?
- *
- * If TRUE, then the grows upward.
- * If FALSE, then the grows toward smaller addresses.
- */
-
-#define CPU_STACK_GROWS_UP FALSE
-
-/*
- * The following is the variable attribute used to force alignment
- * of critical RTEMS structures. On some processors it may make
- * sense to have these aligned on tighter boundaries than
- * the minimum requirements of the compiler in order to have as
- * much of the critical data area as possible in a cache line.
- *
- * The placement of this macro in the declaration of the variables
- * is based on the syntactically requirements of the GNU C
- * "__attribute__" extension. For example with GNU C, use
- * the following to force a structures to a 32 byte boundary.
- *
- * __attribute__ ((aligned (32)))
- *
- * NOTE: Currently only the Priority Bit Map table uses this feature.
- * To benefit from using this, the data must be heavily
- * used so it will stay in the cache and used frequently enough
- * in the executive to justify turning this on.
- */
-
-#define CPU_STRUCTURE_ALIGNMENT \
- __attribute__ ((aligned (PPC_CACHE_ALIGNMENT)))
-
-/*
- * Define what is required to specify how the network to host conversion
- * routines are handled.
- */
-
-#define CPU_HAS_OWN_HOST_TO_NETWORK_ROUTINES FALSE
-#define CPU_BIG_ENDIAN TRUE
-#define CPU_LITTLE_ENDIAN FALSE
-
-/*
- * The following defines the number of bits actually used in the
- * interrupt field of the task mode. How those bits map to the
- * CPU interrupt levels is defined by the routine _CPU_ISR_Set_level().
- *
- * The interrupt level is bit mapped for the PowerPC family. The
- * bits are set to 0 to indicate that a particular exception source
- * enabled and 1 if it is disabled. This keeps with RTEMS convention
- * that interrupt level 0 means all sources are enabled.
- *
- * The bits are assigned to correspond to enable bits in the MSR.
- */
-
-#define PPC_INTERRUPT_LEVEL_ME 0x01
-#define PPC_INTERRUPT_LEVEL_EE 0x02
-#define PPC_INTERRUPT_LEVEL_CE 0x04
-
-/* XXX should these be maskable? */
-#if 0
-#define PPC_INTERRUPT_LEVEL_DE 0x08
-#define PPC_INTERRUPT_LEVEL_BE 0x10
-#define PPC_INTERRUPT_LEVEL_SE 0x20
-#endif
-
-#define CPU_MODES_INTERRUPT_MASK 0x00000007
-
-/*
- * Processor defined structures
- *
- * Examples structures include the descriptor tables from the i386
- * and the processor control structure on the i960ca.
- */
-
-/* may need to put some structures here. */
-
-/*
- * Contexts
- *
- * Generally there are 2 types of context to save.
- * 1. Interrupt registers to save
- * 2. Task level registers to save
- *
- * This means we have the following 3 context items:
- * 1. task level context stuff:: Context_Control
- * 2. floating point task stuff:: Context_Control_fp
- * 3. special interrupt level context :: Context_Control_interrupt
- *
- * On some processors, it is cost-effective to save only the callee
- * preserved registers during a task context switch. This means
- * that the ISR code needs to save those registers which do not
- * persist across function calls. It is not mandatory to make this
- * distinctions between the caller/callee saves registers for the
- * purpose of minimizing context saved during task switch and on interrupts.
- * If the cost of saving extra registers is minimal, simplicity is the
- * choice. Save the same context on interrupt entry as for tasks in
- * this case.
- *
- * Additionally, if gdb is to be made aware of RTEMS tasks for this CPU, then
- * care should be used in designing the context area.
- *
- * On some CPUs with hardware floating point support, the Context_Control_fp
- * structure will not be used or it simply consist of an array of a
- * fixed number of bytes. This is done when the floating point context
- * is dumped by a "FP save context" type instruction and the format
- * is not really defined by the CPU. In this case, there is no need
- * to figure out the exact format -- only the size. Of course, although
- * this is enough information for RTEMS, it is probably not enough for
- * a debugger such as gdb. But that is another problem.
- */
-
-typedef struct {
- unsigned32 gpr1; /* Stack pointer for all */
- unsigned32 gpr2; /* TOC in PowerOpen, reserved SVR4, section ptr EABI + */
- unsigned32 gpr13; /* First non volatile PowerOpen, section ptr SVR4/EABI */
- unsigned32 gpr14; /* Non volatile for all */
- unsigned32 gpr15; /* Non volatile for all */
- unsigned32 gpr16; /* Non volatile for all */
- unsigned32 gpr17; /* Non volatile for all */
- unsigned32 gpr18; /* Non volatile for all */
- unsigned32 gpr19; /* Non volatile for all */
- unsigned32 gpr20; /* Non volatile for all */
- unsigned32 gpr21; /* Non volatile for all */
- unsigned32 gpr22; /* Non volatile for all */
- unsigned32 gpr23; /* Non volatile for all */
- unsigned32 gpr24; /* Non volatile for all */
- unsigned32 gpr25; /* Non volatile for all */
- unsigned32 gpr26; /* Non volatile for all */
- unsigned32 gpr27; /* Non volatile for all */
- unsigned32 gpr28; /* Non volatile for all */
- unsigned32 gpr29; /* Non volatile for all */
- unsigned32 gpr30; /* Non volatile for all */
- unsigned32 gpr31; /* Non volatile for all */
- unsigned32 cr; /* PART of the CR is non volatile for all */
- unsigned32 pc; /* Program counter/Link register */
- unsigned32 msr; /* Initial interrupt level */
-} Context_Control;
-
-typedef struct {
- /* The ABIs (PowerOpen/SVR4/EABI) only require saving f14-f31 over
- * procedure calls. However, this would mean that the interrupt
- * frame had to hold f0-f13, and the fpscr. And as the majority
- * of tasks will not have an FP context, we will save the whole
- * context here.
- */
-#if (PPC_HAS_DOUBLE == 1)
- double f[32];
- double fpscr;
-#else
- float f[32];
- float fpscr;
-#endif
-} Context_Control_fp;
-
-typedef struct CPU_Interrupt_frame {
- unsigned32 stacklink; /* Ensure this is a real frame (also reg1 save) */
-#if (PPC_ABI == PPC_ABI_POWEROPEN || PPC_ABI == PPC_ABI_GCC27)
- unsigned32 dummy[13]; /* Used by callees: PowerOpen ABI */
-#else
- unsigned32 dummy[1]; /* Used by callees: SVR4/EABI */
-#endif
- /* This is what is left out of the primary contexts */
- unsigned32 gpr0;
- unsigned32 gpr2; /* play safe */
- unsigned32 gpr3;
- unsigned32 gpr4;
- unsigned32 gpr5;
- unsigned32 gpr6;
- unsigned32 gpr7;
- unsigned32 gpr8;
- unsigned32 gpr9;
- unsigned32 gpr10;
- unsigned32 gpr11;
- unsigned32 gpr12;
- unsigned32 gpr13; /* Play safe */
- unsigned32 gpr28; /* For internal use by the IRQ handler */
- unsigned32 gpr29; /* For internal use by the IRQ handler */
- unsigned32 gpr30; /* For internal use by the IRQ handler */
- unsigned32 gpr31; /* For internal use by the IRQ handler */
- unsigned32 cr; /* Bits of this are volatile, so no-one may save */
- unsigned32 ctr;
- unsigned32 xer;
- unsigned32 lr;
- unsigned32 pc;
- unsigned32 msr;
- unsigned32 pad[3];
-} CPU_Interrupt_frame;
-
-
-/*
- * The following table contains the information required to configure
- * the PowerPC processor specific parameters.
- */
-
-typedef struct {
- void (*pretasking_hook)( void );
- void (*predriver_hook)( void );
- void (*postdriver_hook)( void );
- void (*idle_task)( void );
- boolean do_zero_of_workspace;
- unsigned32 idle_task_stack_size;
- unsigned32 interrupt_stack_size;
- unsigned32 extra_mpci_receive_server_stack;
- void * (*stack_allocate_hook)( unsigned32 );
- void (*stack_free_hook)( void* );
- /* end of fields required on all CPUs */
-
- unsigned32 clicks_per_usec; /* Timer clicks per microsecond */
- void (*spurious_handler)(unsigned32 vector, CPU_Interrupt_frame *);
- boolean exceptions_in_RAM; /* TRUE if in RAM */
-
-#if (defined(ppc403) || defined(mpc860) || defined(mpc821))
- unsigned32 serial_per_sec; /* Serial clocks per second */
- boolean serial_external_clock;
- boolean serial_xon_xoff;
- boolean serial_cts_rts;
- unsigned32 serial_rate;
- unsigned32 timer_average_overhead; /* Average overhead of timer in ticks */
- unsigned32 timer_least_valid; /* Least valid number from timer */
- boolean timer_internal_clock; /* TRUE, when timer runs with CPU clk */
-#endif
-
-#if (defined(mpc860) || defined(mpc821))
- unsigned32 clock_speed; /* Speed of CPU in Hz */
-#endif
-} rtems_cpu_table;
-
-/*
- * Macros to access required entires in the CPU Table are in
- * the file rtems/system.h.
- */
-
-/*
- * Macros to access PowerPC specific additions to the CPU Table
- */
-
-#define rtems_cpu_configuration_get_clicks_per_usec() \
- (_CPU_Table.clicks_per_usec)
-
-#define rtems_cpu_configuration_get_spurious_handler() \
- (_CPU_Table.spurious_handler)
-
-#define rtems_cpu_configuration_get_exceptions_in_ram() \
- (_CPU_Table.exceptions_in_RAM)
-
-#if (defined(ppc403) || defined(mpc860) || defined(mpc821))
-
-#define rtems_cpu_configuration_get_serial_per_sec() \
- (_CPU_Table.serial_per_sec)
-
-#define rtems_cpu_configuration_get_serial_external_clock() \
- (_CPU_Table.serial_external_clock)
-
-#define rtems_cpu_configuration_get_serial_xon_xoff() \
- (_CPU_Table.serial_xon_xoff)
-
-#define rtems_cpu_configuration_get_serial_cts_rts() \
- (_CPU_Table.serial_cts_rts)
-
-#define rtems_cpu_configuration_get_serial_rate() \
- (_CPU_Table.serial_rate)
-
-#define rtems_cpu_configuration_get_timer_average_overhead() \
- (_CPU_Table.timer_average_overhead)
-
-#define rtems_cpu_configuration_get_timer_least_valid() \
- (_CPU_Table.timer_least_valid)
-
-#define rtems_cpu_configuration_get_timer_internal_clock() \
- (_CPU_Table.timer_internal_clock)
-
-#endif
-
-#if (defined(mpc860) || defined(mpc821))
-#define rtems_cpu_configuration_get_clock_speed() \
- (_CPU_Table.clock_speed)
-#endif
-
-
-/*
- * The following type defines an entry in the PPC's trap table.
- *
- * NOTE: The instructions chosen are RTEMS dependent although one is
- * obligated to use two of the four instructions to perform a
- * long jump. The other instructions load one register with the
- * trap type (a.k.a. vector) and another with the psr.
- */
-
-typedef struct {
- unsigned32 stwu_r1; /* stwu %r1, -(??+IP_END)(%1)*/
- unsigned32 stw_r0; /* stw %r0, IP_0(%r1) */
- unsigned32 li_r0_IRQ; /* li %r0, _IRQ */
- unsigned32 b_Handler; /* b PROC (_ISR_Handler) */
-} CPU_Trap_table_entry;
-
-/*
- * This variable is optional. It is used on CPUs on which it is difficult
- * to generate an "uninitialized" FP context. It is filled in by
- * _CPU_Initialize and copied into the task's FP context area during
- * _CPU_Context_Initialize.
- */
-
-/* EXTERN Context_Control_fp _CPU_Null_fp_context; */
-
-/*
- * On some CPUs, RTEMS supports a software managed interrupt stack.
- * This stack is allocated by the Interrupt Manager and the switch
- * is performed in _ISR_Handler. These variables contain pointers
- * to the lowest and highest addresses in the chunk of memory allocated
- * for the interrupt stack. Since it is unknown whether the stack
- * grows up or down (in general), this give the CPU dependent
- * code the option of picking the version it wants to use.
- *
- * NOTE: These two variables are required if the macro
- * CPU_HAS_SOFTWARE_INTERRUPT_STACK is defined as TRUE.
- */
-
-SCORE_EXTERN void *_CPU_Interrupt_stack_low;
-SCORE_EXTERN void *_CPU_Interrupt_stack_high;
-
-/*
- * With some compilation systems, it is difficult if not impossible to
- * call a high-level language routine from assembly language. This
- * is especially true of commercial Ada compilers and name mangling
- * C++ ones. This variable can be optionally defined by the CPU porter
- * and contains the address of the routine _Thread_Dispatch. This
- * can make it easier to invoke that routine at the end of the interrupt
- * sequence (if a dispatch is necessary).
- */
-
-/* EXTERN void (*_CPU_Thread_dispatch_pointer)(); */
-
-/*
- * Nothing prevents the porter from declaring more CPU specific variables.
- */
-
-
-SCORE_EXTERN struct {
- unsigned32 *Nest_level;
- unsigned32 *Disable_level;
- void *Vector_table;
- void *Stack;
-#if (PPC_ABI == PPC_ABI_POWEROPEN)
- unsigned32 Dispatch_r2;
-#else
- unsigned32 Default_r2;
-#if (PPC_ABI != PPC_ABI_GCC27)
- unsigned32 Default_r13;
-#endif
-#endif
- volatile boolean *Switch_necessary;
- boolean *Signal;
-
- unsigned32 msr_initial;
-} _CPU_IRQ_info CPU_STRUCTURE_ALIGNMENT;
-
-/*
- * The size of the floating point context area. On some CPUs this
- * will not be a "sizeof" because the format of the floating point
- * area is not defined -- only the size is. This is usually on
- * CPUs with a "floating point save context" instruction.
- */
-
-#define CPU_CONTEXT_FP_SIZE sizeof( Context_Control_fp )
-
-/*
- * (Optional) # of bytes for libmisc/stackchk to check
- * If not specifed, then it defaults to something reasonable
- * for most architectures.
- */
-
-#define CPU_STACK_CHECK_SIZE (128)
-
-/*
- * Amount of extra stack (above minimum stack size) required by
- * MPCI receive server thread. Remember that in a multiprocessor
- * system this thread must exist and be able to process all directives.
- */
-
-#define CPU_MPCI_RECEIVE_SERVER_EXTRA_STACK 0
-
-/*
- * This defines the number of entries in the ISR_Vector_table managed
- * by RTEMS.
- */
-
-#define CPU_INTERRUPT_NUMBER_OF_VECTORS (PPC_INTERRUPT_MAX)
-#define CPU_INTERRUPT_MAXIMUM_VECTOR_NUMBER (PPC_INTERRUPT_MAX - 1)
-
-/*
- * Should be large enough to run all RTEMS tests. This insures
- * that a "reasonable" small application should not have any problems.
- */
-
-#define CPU_STACK_MINIMUM_SIZE (1024*8)
-
-/*
- * CPU's worst alignment requirement for data types on a byte boundary. This
- * alignment does not take into account the requirements for the stack.
- */
-
-#define CPU_ALIGNMENT (PPC_ALIGNMENT)
-
-/*
- * This number corresponds to the byte alignment requirement for the
- * heap handler. This alignment requirement may be stricter than that
- * for the data types alignment specified by CPU_ALIGNMENT. It is
- * common for the heap to follow the same alignment requirement as
- * CPU_ALIGNMENT. If the CPU_ALIGNMENT is strict enough for the heap,
- * then this should be set to CPU_ALIGNMENT.
- *
- * NOTE: This does not have to be a power of 2. It does have to
- * be greater or equal to than CPU_ALIGNMENT.
- */
-
-#define CPU_HEAP_ALIGNMENT (PPC_ALIGNMENT)
-
-/*
- * This number corresponds to the byte alignment requirement for memory
- * buffers allocated by the partition manager. This alignment requirement
- * may be stricter than that for the data types alignment specified by
- * CPU_ALIGNMENT. It is common for the partition to follow the same
- * alignment requirement as CPU_ALIGNMENT. If the CPU_ALIGNMENT is strict
- * enough for the partition, then this should be set to CPU_ALIGNMENT.
- *
- * NOTE: This does not have to be a power of 2. It does have to
- * be greater or equal to than CPU_ALIGNMENT.
- */
-
-#define CPU_PARTITION_ALIGNMENT (PPC_ALIGNMENT)
-
-/*
- * This number corresponds to the byte alignment requirement for the
- * stack. This alignment requirement may be stricter than that for the
- * data types alignment specified by CPU_ALIGNMENT. If the CPU_ALIGNMENT
- * is strict enough for the stack, then this should be set to 0.
- *
- * NOTE: This must be a power of 2 either 0 or greater than CPU_ALIGNMENT.
- */
-
-#define CPU_STACK_ALIGNMENT (PPC_STACK_ALIGNMENT)
-
-/* ISR handler macros */
-
-/*
- * Disable all interrupts for an RTEMS critical section. The previous
- * level is returned in _isr_cookie.
- */
-
-#define loc_string(a,b) a " (" #b ")\n"
-
-#define _CPU_MSR_Value( _msr_value ) \
- do { \
- _msr_value = 0; \
- asm volatile ("mfmsr %0" : "=&r" ((_msr_value)) : "0" ((_msr_value))); \
- } while (0)
-
-#define _CPU_MSR_SET( _msr_value ) \
-{ asm volatile ("mtmsr %0" : "=&r" ((_msr_value)) : "0" ((_msr_value))); }
-
-#if 0
-#define _CPU_ISR_Disable( _isr_cookie ) \
- { register unsigned int _disable_mask = PPC_MSR_DISABLE_MASK; \
- _isr_cookie = 0; \
- asm volatile (
- "mfmsr %0" : \
- "=r" ((_isr_cookie)) : \
- "0" ((_isr_cookie)) \
- ); \
- asm volatile (
- "andc %1,%0,%1" : \
- "=r" ((_isr_cookie)), "=&r" ((_disable_mask)) : \
- "0" ((_isr_cookie)), "1" ((_disable_mask)) \
- ); \
- asm volatile (
- "mtmsr %1" : \
- "=r" ((_disable_mask)) : \
- "0" ((_disable_mask)) \
- ); \
- }
-#endif
-
-#define _CPU_ISR_Disable( _isr_cookie ) \
- { register unsigned int _disable_mask = PPC_MSR_DISABLE_MASK; \
- _isr_cookie = 0; \
- asm volatile ( \
- "mfmsr %0; andc %1,%0,%1; mtmsr %1" : \
- "=&r" ((_isr_cookie)), "=&r" ((_disable_mask)) : \
- "0" ((_isr_cookie)), "1" ((_disable_mask)) \
- ); \
- }
-
-
-#define _CPU_Data_Cache_Block_Flush( _address ) \
- do { register void *__address = (_address); \
- register unsigned32 _zero = 0; \
- asm volatile ( "dcbf %0,%1" : \
- "=r" (_zero), "=r" (__address) : \
- "0" (_zero), "1" (__address) \
- ); \
- } while (0)
-
-
-/*
- * Enable interrupts to the previous level (returned by _CPU_ISR_Disable).
- * This indicates the end of an RTEMS critical section. The parameter
- * _isr_cookie is not modified.
- */
-
-#define _CPU_ISR_Enable( _isr_cookie ) \
- { \
- asm volatile ( "mtmsr %0" : \
- "=r" ((_isr_cookie)) : \
- "0" ((_isr_cookie))); \
- }
-
-/*
- * This temporarily restores the interrupt to _isr_cookie before immediately
- * disabling them again. This is used to divide long RTEMS critical
- * sections into two or more parts. The parameter _isr_cookie is not
- * modified.
- *
- * NOTE: The version being used is not very optimized but it does
- * not trip a problem in gcc where the disable mask does not
- * get loaded. Check this for future (post 10/97 gcc versions.
- */
-
-#define _CPU_ISR_Flash( _isr_cookie ) \
- { register unsigned int _disable_mask = PPC_MSR_DISABLE_MASK; \
- asm volatile ( \
- "mtmsr %0; andc %1,%0,%1; mtmsr %1" : \
- "=r" ((_isr_cookie)), "=r" ((_disable_mask)) : \
- "0" ((_isr_cookie)), "1" ((_disable_mask)) \
- ); \
- }
-
-/*
- * Map interrupt level in task mode onto the hardware that the CPU
- * actually provides. Currently, interrupt levels which do not
- * map onto the CPU in a generic fashion are undefined. Someday,
- * it would be nice if these were "mapped" by the application
- * via a callout. For example, m68k has 8 levels 0 - 7, levels
- * 8 - 255 would be available for bsp/application specific meaning.
- * This could be used to manage a programmable interrupt controller
- * via the rtems_task_mode directive.
- */
-
-unsigned32 _CPU_ISR_Calculate_level(
- unsigned32 new_level
-);
-
-void _CPU_ISR_Set_level(
- unsigned32 new_level
-);
-
-unsigned32 _CPU_ISR_Get_level( void );
-
-void _CPU_ISR_install_raw_handler(
- unsigned32 vector,
- proc_ptr new_handler,
- proc_ptr *old_handler
-);
-
-/* end of ISR handler macros */
-
-/*
- * Simple spin delay in microsecond units for device drivers.
- * This is very dependent on the clock speed of the target.
- */
-
-#define CPU_Get_timebase_low( _value ) \
- asm volatile( "mftb %0" : "=r" (_value) )
-
-#define delay( _microseconds ) \
- do { \
- unsigned32 start, ticks, now; \
- CPU_Get_timebase_low( start ) ; \
- ticks = (_microseconds) * _CPU_Table.clicks_per_usec; \
- do \
- CPU_Get_timebase_low( now ) ; \
- while (now - start < ticks); \
- } while (0)
-
-#define delay_in_bus_cycles( _cycles ) \
- do { \
- unsigned32 start, now; \
- CPU_Get_timebase_low( start ); \
- do \
- CPU_Get_timebase_low( now ); \
- while (now - start < (_cycles)); \
- } while (0)
-
-
-
-/* Context handler macros */
-
-/*
- * Initialize the context to a state suitable for starting a
- * task after a context restore operation. Generally, this
- * involves:
- *
- * - setting a starting address
- * - preparing the stack
- * - preparing the stack and frame pointers
- * - setting the proper interrupt level in the context
- * - initializing the floating point context
- *
- * This routine generally does not set any unnecessary register
- * in the context. The state of the "general data" registers is
- * undefined at task start time.
- *
- * NOTE: Implemented as a subroutine for the SPARC port.
- */
-
-void _CPU_Context_Initialize(
- Context_Control *the_context,
- unsigned32 *stack_base,
- unsigned32 size,
- unsigned32 new_level,
- void *entry_point,
- boolean is_fp
-);
-
-/*
- * This routine is responsible for somehow restarting the currently
- * executing task. If you are lucky, then all that is necessary
- * is restoring the context. Otherwise, there will need to be
- * a special assembly routine which does something special in this
- * case. Context_Restore should work most of the time. It will
- * not work if restarting self conflicts with the stack frame
- * assumptions of restoring a context.
- */
-
-#define _CPU_Context_Restart_self( _the_context ) \
- _CPU_Context_restore( (_the_context) );
-
-/*
- * The purpose of this macro is to allow the initial pointer into
- * a floating point context area (used to save the floating point
- * context) to be at an arbitrary place in the floating point
- * context area.
- *
- * This is necessary because some FP units are designed to have
- * their context saved as a stack which grows into lower addresses.
- * Other FP units can be saved by simply moving registers into offsets
- * from the base of the context area. Finally some FP units provide
- * a "dump context" instruction which could fill in from high to low
- * or low to high based on the whim of the CPU designers.
- */
-
-#define _CPU_Context_Fp_start( _base, _offset ) \
- ( (void *) _Addresses_Add_offset( (_base), (_offset) ) )
-
-/*
- * This routine initializes the FP context area passed to it to.
- * There are a few standard ways in which to initialize the
- * floating point context. The code included for this macro assumes
- * that this is a CPU in which a "initial" FP context was saved into
- * _CPU_Null_fp_context and it simply copies it to the destination
- * context passed to it.
- *
- * Other models include (1) not doing anything, and (2) putting
- * a "null FP status word" in the correct place in the FP context.
- */
-
-#define _CPU_Context_Initialize_fp( _destination ) \
- { \
- ((Context_Control_fp *) *((void **) _destination))->fpscr = PPC_INIT_FPSCR; \
- }
-
-/* end of Context handler macros */
-
-/* Fatal Error manager macros */
-
-/*
- * This routine copies _error into a known place -- typically a stack
- * location or a register, optionally disables interrupts, and
- * halts/stops the CPU.
- */
-
-#define _CPU_Fatal_halt( _error ) \
- _CPU_Fatal_error(_error)
-
-/* end of Fatal Error manager macros */
-
-/* Bitfield handler macros */
-
-/*
- * This routine sets _output to the bit number of the first bit
- * set in _value. _value is of CPU dependent type Priority_Bit_map_control.
- * This type may be either 16 or 32 bits wide although only the 16
- * least significant bits will be used.
- *
- * There are a number of variables in using a "find first bit" type
- * instruction.
- *
- * (1) What happens when run on a value of zero?
- * (2) Bits may be numbered from MSB to LSB or vice-versa.
- * (3) The numbering may be zero or one based.
- * (4) The "find first bit" instruction may search from MSB or LSB.
- *
- * RTEMS guarantees that (1) will never happen so it is not a concern.
- * (2),(3), (4) are handled by the macros _CPU_Priority_mask() and
- * _CPU_Priority_Bits_index(). These three form a set of routines
- * which must logically operate together. Bits in the _value are
- * set and cleared based on masks built by _CPU_Priority_mask().
- * The basic major and minor values calculated by _Priority_Major()
- * and _Priority_Minor() are "massaged" by _CPU_Priority_Bits_index()
- * to properly range between the values returned by the "find first bit"
- * instruction. This makes it possible for _Priority_Get_highest() to
- * calculate the major and directly index into the minor table.
- * This mapping is necessary to ensure that 0 (a high priority major/minor)
- * is the first bit found.
- *
- * This entire "find first bit" and mapping process depends heavily
- * on the manner in which a priority is broken into a major and minor
- * components with the major being the 4 MSB of a priority and minor
- * the 4 LSB. Thus (0 << 4) + 0 corresponds to priority 0 -- the highest
- * priority. And (15 << 4) + 14 corresponds to priority 254 -- the next
- * to the lowest priority.
- *
- * If your CPU does not have a "find first bit" instruction, then
- * there are ways to make do without it. Here are a handful of ways
- * to implement this in software:
- *
- * - a series of 16 bit test instructions
- * - a "binary search using if's"
- * - _number = 0
- * if _value > 0x00ff
- * _value >>=8
- * _number = 8;
- *
- * if _value > 0x0000f
- * _value >=8
- * _number += 4
- *
- * _number += bit_set_table[ _value ]
- *
- * where bit_set_table[ 16 ] has values which indicate the first
- * bit set
- */
-
-#define _CPU_Bitfield_Find_first_bit( _value, _output ) \
- { \
- asm volatile ("cntlzw %0, %1" : "=r" ((_output)), "=r" ((_value)) : \
- "1" ((_value))); \
- }
-
-/* end of Bitfield handler macros */
-
-/*
- * This routine builds the mask which corresponds to the bit fields
- * as searched by _CPU_Bitfield_Find_first_bit(). See the discussion
- * for that routine.
- */
-
-#define _CPU_Priority_Mask( _bit_number ) \
- ( 0x80000000 >> (_bit_number) )
-
-/*
- * This routine translates the bit numbers returned by
- * _CPU_Bitfield_Find_first_bit() into something suitable for use as
- * a major or minor component of a priority. See the discussion
- * for that routine.
- */
-
-#define _CPU_Priority_bits_index( _priority ) \
- (_priority)
-
-/* end of Priority handler macros */
-
-/* variables */
-
-extern const unsigned32 _CPU_msrs[4];
-
-/* functions */
-
-/*
- * _CPU_Initialize
- *
- * This routine performs CPU dependent initialization.
- */
-
-void _CPU_Initialize(
- rtems_cpu_table *cpu_table,
- void (*thread_dispatch)
-);
-
-/*
- * _CPU_ISR_install_vector
- *
- * This routine installs an interrupt vector.
- */
-
-void _CPU_ISR_install_vector(
- unsigned32 vector,
- proc_ptr new_handler,
- proc_ptr *old_handler
-);
-
-/*
- * _CPU_Install_interrupt_stack
- *
- * This routine installs the hardware interrupt stack pointer.
- *
- * NOTE: It need only be provided if CPU_HAS_HARDWARE_INTERRUPT_STACK
- * is TRUE.
- */
-
-void _CPU_Install_interrupt_stack( void );
-
-/*
- * _CPU_Context_switch
- *
- * This routine switches from the run context to the heir context.
- */
-
-void _CPU_Context_switch(
- Context_Control *run,
- Context_Control *heir
-);
-
-/*
- * _CPU_Context_restore
- *
- * This routine is generallu used only to restart self in an
- * efficient manner. It may simply be a label in _CPU_Context_switch.
- *
- * NOTE: May be unnecessary to reload some registers.
- */
-
-void _CPU_Context_restore(
- Context_Control *new_context
-);
-
-/*
- * _CPU_Context_save_fp
- *
- * This routine saves the floating point context passed to it.
- */
-
-void _CPU_Context_save_fp(
- void **fp_context_ptr
-);
-
-/*
- * _CPU_Context_restore_fp
- *
- * This routine restores the floating point context passed to it.
- */
-
-void _CPU_Context_restore_fp(
- void **fp_context_ptr
-);
-
-void _CPU_Fatal_error(
- unsigned32 _error
-);
-
-/* The following routine swaps the endian format of an unsigned int.
- * It must be static because it is referenced indirectly.
- *
- * This version will work on any processor, but if there is a better
- * way for your CPU PLEASE use it. The most common way to do this is to:
- *
- * swap least significant two bytes with 16-bit rotate
- * swap upper and lower 16-bits
- * swap most significant two bytes with 16-bit rotate
- *
- * Some CPUs have special instructions which swap a 32-bit quantity in
- * a single instruction (e.g. i486). It is probably best to avoid
- * an "endian swapping control bit" in the CPU. One good reason is
- * that interrupts would probably have to be disabled to insure that
- * an interrupt does not try to access the same "chunk" with the wrong
- * endian. Another good reason is that on some CPUs, the endian bit
- * endianness for ALL fetches -- both code and data -- so the code
- * will be fetched incorrectly.
- */
-
-static inline unsigned int CPU_swap_u32(
- unsigned int value
-)
-{
- unsigned32 swapped;
-
- asm volatile("rlwimi %0,%1,8,24,31;"
- "rlwimi %0,%1,24,16,23;"
- "rlwimi %0,%1,8,8,15;"
- "rlwimi %0,%1,24,0,7;" :
- "=&r" ((swapped)) : "r" ((value)));
-
- return( swapped );
-}
-
-#define CPU_swap_u16( value ) \
- (((value&0xff) << 8) | ((value >> 8)&0xff))
-
-/*
- * Routines to access the decrementer register
- */
-
-#define PPC_Set_decrementer( _clicks ) \
- do { \
- asm volatile( "mtdec %0" : "=r" ((_clicks)) : "r" ((_clicks)) ); \
- } while (0)
-
-/*
- * Routines to access the time base register
- */
-
-static inline unsigned64 PPC_Get_timebase_register( void )
-{
- unsigned32 tbr_low;
- unsigned32 tbr_high;
- unsigned32 tbr_high_old;
- unsigned64 tbr;
-
- do {
- asm volatile( "mftbu %0" : "=r" (tbr_high_old));
- asm volatile( "mftb %0" : "=r" (tbr_low));
- asm volatile( "mftbu %0" : "=r" (tbr_high));
- } while ( tbr_high_old != tbr_high );
-
- tbr = tbr_high;
- tbr <<= 32;
- tbr |= tbr_low;
- return tbr;
-}
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
diff --git a/c/src/exec/score/cpu/powerpc/other_cpu/cpu_asm.S b/c/src/exec/score/cpu/powerpc/other_cpu/cpu_asm.S
deleted file mode 100644
index a377fa5d2a..0000000000
--- a/c/src/exec/score/cpu/powerpc/other_cpu/cpu_asm.S
+++ /dev/null
@@ -1,809 +0,0 @@
-
-/* cpu_asm.s 1.1 - 95/12/04
- *
- * This file contains the assembly code for the PowerPC implementation
- * of RTEMS.
- *
- * Author: Andrew Bray <andy@i-cubed.co.uk>
- *
- * COPYRIGHT (c) 1995 by i-cubed ltd.
- *
- * To anyone who acknowledges that this file is provided "AS IS"
- * without any express or implied warranty:
- * permission to use, copy, modify, and distribute this file
- * for any purpose is hereby granted without fee, provided that
- * the above copyright notice and this notice appears in all
- * copies, and that the name of i-cubed limited not be used in
- * advertising or publicity pertaining to distribution of the
- * software without specific, written prior permission.
- * i-cubed limited makes no representations about the suitability
- * of this software for any purpose.
- *
- * Derived from c/src/exec/cpu/no_cpu/cpu_asm.c:
- *
- * COPYRIGHT (c) 1989-1997.
- * On-Line Applications Research Corporation (OAR).
- * Copyright assigned to U.S. Government, 1994.
- *
- * The license and distribution terms for this file may in
- * the file LICENSE in this distribution or at
- * http://www.OARcorp.com/rtems/license.html.
- *
- * $Id$
- */
-
-#include <asm.h>
-
-/*
- * Offsets for various Contexts
- */
- .set GP_1, 0
- .set GP_2, (GP_1 + 4)
- .set GP_13, (GP_2 + 4)
- .set GP_14, (GP_13 + 4)
-
- .set GP_15, (GP_14 + 4)
- .set GP_16, (GP_15 + 4)
- .set GP_17, (GP_16 + 4)
- .set GP_18, (GP_17 + 4)
-
- .set GP_19, (GP_18 + 4)
- .set GP_20, (GP_19 + 4)
- .set GP_21, (GP_20 + 4)
- .set GP_22, (GP_21 + 4)
-
- .set GP_23, (GP_22 + 4)
- .set GP_24, (GP_23 + 4)
- .set GP_25, (GP_24 + 4)
- .set GP_26, (GP_25 + 4)
-
- .set GP_27, (GP_26 + 4)
- .set GP_28, (GP_27 + 4)
- .set GP_29, (GP_28 + 4)
- .set GP_30, (GP_29 + 4)
-
- .set GP_31, (GP_30 + 4)
- .set GP_CR, (GP_31 + 4)
- .set GP_PC, (GP_CR + 4)
- .set GP_MSR, (GP_PC + 4)
-
-#if (PPC_HAS_DOUBLE == 1)
- .set FP_0, 0
- .set FP_1, (FP_0 + 8)
- .set FP_2, (FP_1 + 8)
- .set FP_3, (FP_2 + 8)
- .set FP_4, (FP_3 + 8)
- .set FP_5, (FP_4 + 8)
- .set FP_6, (FP_5 + 8)
- .set FP_7, (FP_6 + 8)
- .set FP_8, (FP_7 + 8)
- .set FP_9, (FP_8 + 8)
- .set FP_10, (FP_9 + 8)
- .set FP_11, (FP_10 + 8)
- .set FP_12, (FP_11 + 8)
- .set FP_13, (FP_12 + 8)
- .set FP_14, (FP_13 + 8)
- .set FP_15, (FP_14 + 8)
- .set FP_16, (FP_15 + 8)
- .set FP_17, (FP_16 + 8)
- .set FP_18, (FP_17 + 8)
- .set FP_19, (FP_18 + 8)
- .set FP_20, (FP_19 + 8)
- .set FP_21, (FP_20 + 8)
- .set FP_22, (FP_21 + 8)
- .set FP_23, (FP_22 + 8)
- .set FP_24, (FP_23 + 8)
- .set FP_25, (FP_24 + 8)
- .set FP_26, (FP_25 + 8)
- .set FP_27, (FP_26 + 8)
- .set FP_28, (FP_27 + 8)
- .set FP_29, (FP_28 + 8)
- .set FP_30, (FP_29 + 8)
- .set FP_31, (FP_30 + 8)
- .set FP_FPSCR, (FP_31 + 8)
-#else
- .set FP_0, 0
- .set FP_1, (FP_0 + 4)
- .set FP_2, (FP_1 + 4)
- .set FP_3, (FP_2 + 4)
- .set FP_4, (FP_3 + 4)
- .set FP_5, (FP_4 + 4)
- .set FP_6, (FP_5 + 4)
- .set FP_7, (FP_6 + 4)
- .set FP_8, (FP_7 + 4)
- .set FP_9, (FP_8 + 4)
- .set FP_10, (FP_9 + 4)
- .set FP_11, (FP_10 + 4)
- .set FP_12, (FP_11 + 4)
- .set FP_13, (FP_12 + 4)
- .set FP_14, (FP_13 + 4)
- .set FP_15, (FP_14 + 4)
- .set FP_16, (FP_15 + 4)
- .set FP_17, (FP_16 + 4)
- .set FP_18, (FP_17 + 4)
- .set FP_19, (FP_18 + 4)
- .set FP_20, (FP_19 + 4)
- .set FP_21, (FP_20 + 4)
- .set FP_22, (FP_21 + 4)
- .set FP_23, (FP_22 + 4)
- .set FP_24, (FP_23 + 4)
- .set FP_25, (FP_24 + 4)
- .set FP_26, (FP_25 + 4)
- .set FP_27, (FP_26 + 4)
- .set FP_28, (FP_27 + 4)
- .set FP_29, (FP_28 + 4)
- .set FP_30, (FP_29 + 4)
- .set FP_31, (FP_30 + 4)
- .set FP_FPSCR, (FP_31 + 4)
-#endif
-
- .set IP_LINK, 0
-#if (PPC_ABI == PPC_ABI_POWEROPEN || PPC_ABI == PPC_ABI_GCC27)
- .set IP_0, (IP_LINK + 56)
-#else
- .set IP_0, (IP_LINK + 8)
-#endif
- .set IP_2, (IP_0 + 4)
-
- .set IP_3, (IP_2 + 4)
- .set IP_4, (IP_3 + 4)
- .set IP_5, (IP_4 + 4)
- .set IP_6, (IP_5 + 4)
-
- .set IP_7, (IP_6 + 4)
- .set IP_8, (IP_7 + 4)
- .set IP_9, (IP_8 + 4)
- .set IP_10, (IP_9 + 4)
-
- .set IP_11, (IP_10 + 4)
- .set IP_12, (IP_11 + 4)
- .set IP_13, (IP_12 + 4)
- .set IP_28, (IP_13 + 4)
-
- .set IP_29, (IP_28 + 4)
- .set IP_30, (IP_29 + 4)
- .set IP_31, (IP_30 + 4)
- .set IP_CR, (IP_31 + 4)
-
- .set IP_CTR, (IP_CR + 4)
- .set IP_XER, (IP_CTR + 4)
- .set IP_LR, (IP_XER + 4)
- .set IP_PC, (IP_LR + 4)
-
- .set IP_MSR, (IP_PC + 4)
- .set IP_END, (IP_MSR + 16)
-
- /* _CPU_IRQ_info offsets */
-
- /* These must be in this order */
- .set Nest_level, 0
- .set Disable_level, 4
- .set Vector_table, 8
- .set Stack, 12
-#if (PPC_ABI == PPC_ABI_POWEROPEN)
- .set Dispatch_r2, 16
- .set Switch_necessary, 20
-#else
- .set Default_r2, 16
-#if (PPC_ABI != PPC_ABI_GCC27)
- .set Default_r13, 20
- .set Switch_necessary, 24
-#else
- .set Switch_necessary, 20
-#endif
-#endif
- .set Signal, Switch_necessary + 4
- .set msr_initial, Signal + 4
-
- BEGIN_CODE
-/*
- * _CPU_Context_save_fp_context
- *
- * This routine is responsible for saving the FP context
- * at *fp_context_ptr. If the point to load the FP context
- * from is changed then the pointer is modified by this routine.
- *
- * Sometimes a macro implementation of this is in cpu.h which dereferences
- * the ** and a similarly named routine in this file is passed something
- * like a (Context_Control_fp *). The general rule on making this decision
- * is to avoid writing assembly language.
- */
-
- ALIGN (PPC_CACHE_ALIGNMENT, PPC_CACHE_ALIGN_POWER)
- PUBLIC_PROC (_CPU_Context_save_fp)
-PROC (_CPU_Context_save_fp):
-#if (PPC_HAS_FPU == 1)
- lwz r3, 0(r3)
-#if (PPC_HAS_DOUBLE == 1)
- stfd f0, FP_0(r3)
- stfd f1, FP_1(r3)
- stfd f2, FP_2(r3)
- stfd f3, FP_3(r3)
- stfd f4, FP_4(r3)
- stfd f5, FP_5(r3)
- stfd f6, FP_6(r3)
- stfd f7, FP_7(r3)
- stfd f8, FP_8(r3)
- stfd f9, FP_9(r3)
- stfd f10, FP_10(r3)
- stfd f11, FP_11(r3)
- stfd f12, FP_12(r3)
- stfd f13, FP_13(r3)
- stfd f14, FP_14(r3)
- stfd f15, FP_15(r3)
- stfd f16, FP_16(r3)
- stfd f17, FP_17(r3)
- stfd f18, FP_18(r3)
- stfd f19, FP_19(r3)
- stfd f20, FP_20(r3)
- stfd f21, FP_21(r3)
- stfd f22, FP_22(r3)
- stfd f23, FP_23(r3)
- stfd f24, FP_24(r3)
- stfd f25, FP_25(r3)
- stfd f26, FP_26(r3)
- stfd f27, FP_27(r3)
- stfd f28, FP_28(r3)
- stfd f29, FP_29(r3)
- stfd f30, FP_30(r3)
- stfd f31, FP_31(r3)
- mffs f2
- stfd f2, FP_FPSCR(r3)
-#else
- stfs f0, FP_0(r3)
- stfs f1, FP_1(r3)
- stfs f2, FP_2(r3)
- stfs f3, FP_3(r3)
- stfs f4, FP_4(r3)
- stfs f5, FP_5(r3)
- stfs f6, FP_6(r3)
- stfs f7, FP_7(r3)
- stfs f8, FP_8(r3)
- stfs f9, FP_9(r3)
- stfs f10, FP_10(r3)
- stfs f11, FP_11(r3)
- stfs f12, FP_12(r3)
- stfs f13, FP_13(r3)
- stfs f14, FP_14(r3)
- stfs f15, FP_15(r3)
- stfs f16, FP_16(r3)
- stfs f17, FP_17(r3)
- stfs f18, FP_18(r3)
- stfs f19, FP_19(r3)
- stfs f20, FP_20(r3)
- stfs f21, FP_21(r3)
- stfs f22, FP_22(r3)
- stfs f23, FP_23(r3)
- stfs f24, FP_24(r3)
- stfs f25, FP_25(r3)
- stfs f26, FP_26(r3)
- stfs f27, FP_27(r3)
- stfs f28, FP_28(r3)
- stfs f29, FP_29(r3)
- stfs f30, FP_30(r3)
- stfs f31, FP_31(r3)
- mffs f2
- stfs f2, FP_FPSCR(r3)
-#endif
-#endif
- blr
-
-/*
- * _CPU_Context_restore_fp_context
- *
- * This routine is responsible for restoring the FP context
- * at *fp_context_ptr. If the point to load the FP context
- * from is changed then the pointer is modified by this routine.
- *
- * Sometimes a macro implementation of this is in cpu.h which dereferences
- * the ** and a similarly named routine in this file is passed something
- * like a (Context_Control_fp *). The general rule on making this decision
- * is to avoid writing assembly language.
- */
-
- ALIGN (PPC_CACHE_ALIGNMENT, PPC_CACHE_ALIGN_POWER)
- PUBLIC_PROC (_CPU_Context_restore_fp)
-PROC (_CPU_Context_restore_fp):
-#if (PPC_HAS_FPU == 1)
- lwz r3, 0(r3)
-#if (PPC_HAS_DOUBLE == 1)
- lfd f2, FP_FPSCR(r3)
- mtfsf 255, f2
- lfd f0, FP_0(r3)
- lfd f1, FP_1(r3)
- lfd f2, FP_2(r3)
- lfd f3, FP_3(r3)
- lfd f4, FP_4(r3)
- lfd f5, FP_5(r3)
- lfd f6, FP_6(r3)
- lfd f7, FP_7(r3)
- lfd f8, FP_8(r3)
- lfd f9, FP_9(r3)
- lfd f10, FP_10(r3)
- lfd f11, FP_11(r3)
- lfd f12, FP_12(r3)
- lfd f13, FP_13(r3)
- lfd f14, FP_14(r3)
- lfd f15, FP_15(r3)
- lfd f16, FP_16(r3)
- lfd f17, FP_17(r3)
- lfd f18, FP_18(r3)
- lfd f19, FP_19(r3)
- lfd f20, FP_20(r3)
- lfd f21, FP_21(r3)
- lfd f22, FP_22(r3)
- lfd f23, FP_23(r3)
- lfd f24, FP_24(r3)
- lfd f25, FP_25(r3)
- lfd f26, FP_26(r3)
- lfd f27, FP_27(r3)
- lfd f28, FP_28(r3)
- lfd f29, FP_29(r3)
- lfd f30, FP_30(r3)
- lfd f31, FP_31(r3)
-#else
- lfs f2, FP_FPSCR(r3)
- mtfsf 255, f2
- lfs f0, FP_0(r3)
- lfs f1, FP_1(r3)
- lfs f2, FP_2(r3)
- lfs f3, FP_3(r3)
- lfs f4, FP_4(r3)
- lfs f5, FP_5(r3)
- lfs f6, FP_6(r3)
- lfs f7, FP_7(r3)
- lfs f8, FP_8(r3)
- lfs f9, FP_9(r3)
- lfs f10, FP_10(r3)
- lfs f11, FP_11(r3)
- lfs f12, FP_12(r3)
- lfs f13, FP_13(r3)
- lfs f14, FP_14(r3)
- lfs f15, FP_15(r3)
- lfs f16, FP_16(r3)
- lfs f17, FP_17(r3)
- lfs f18, FP_18(r3)
- lfs f19, FP_19(r3)
- lfs f20, FP_20(r3)
- lfs f21, FP_21(r3)
- lfs f22, FP_22(r3)
- lfs f23, FP_23(r3)
- lfs f24, FP_24(r3)
- lfs f25, FP_25(r3)
- lfs f26, FP_26(r3)
- lfs f27, FP_27(r3)
- lfs f28, FP_28(r3)
- lfs f29, FP_29(r3)
- lfs f30, FP_30(r3)
- lfs f31, FP_31(r3)
-#endif
-#endif
- blr
-
-
-/* _CPU_Context_switch
- *
- * This routine performs a normal non-FP context switch.
- */
- ALIGN (PPC_CACHE_ALIGNMENT, PPC_CACHE_ALIGN_POWER)
- PUBLIC_PROC (_CPU_Context_switch)
-PROC (_CPU_Context_switch):
- sync
- isync
-#if (PPC_CACHE_ALIGNMENT == 4) /* No cache */
- stw r1, GP_1(r3)
- lwz r1, GP_1(r4)
- stw r2, GP_2(r3)
- lwz r2, GP_2(r4)
-#if (PPC_USE_MULTIPLE == 1)
- stmw r13, GP_13(r3)
- lmw r13, GP_13(r4)
-#else
- stw r13, GP_13(r3)
- lwz r13, GP_13(r4)
- stw r14, GP_14(r3)
- lwz r14, GP_14(r4)
- stw r15, GP_15(r3)
- lwz r15, GP_15(r4)
- stw r16, GP_16(r3)
- lwz r16, GP_16(r4)
- stw r17, GP_17(r3)
- lwz r17, GP_17(r4)
- stw r18, GP_18(r3)
- lwz r18, GP_18(r4)
- stw r19, GP_19(r3)
- lwz r19, GP_19(r4)
- stw r20, GP_20(r3)
- lwz r20, GP_20(r4)
- stw r21, GP_21(r3)
- lwz r21, GP_21(r4)
- stw r22, GP_22(r3)
- lwz r22, GP_22(r4)
- stw r23, GP_23(r3)
- lwz r23, GP_23(r4)
- stw r24, GP_24(r3)
- lwz r24, GP_24(r4)
- stw r25, GP_25(r3)
- lwz r25, GP_25(r4)
- stw r26, GP_26(r3)
- lwz r26, GP_26(r4)
- stw r27, GP_27(r3)
- lwz r27, GP_27(r4)
- stw r28, GP_28(r3)
- lwz r28, GP_28(r4)
- stw r29, GP_29(r3)
- lwz r29, GP_29(r4)
- stw r30, GP_30(r3)
- lwz r30, GP_30(r4)
- stw r31, GP_31(r3)
- lwz r31, GP_31(r4)
-#endif
- mfcr r5
- stw r5, GP_CR(r3)
- lwz r5, GP_CR(r4)
- mflr r6
- mtcrf 255, r5
- stw r6, GP_PC(r3)
- lwz r6, GP_PC(r4)
- mfmsr r7
- mtlr r6
- stw r7, GP_MSR(r3)
- lwz r7, GP_MSR(r4)
- mtmsr r7
-#endif
-#if (PPC_CACHE_ALIGNMENT == 16)
- /* This assumes that all the registers are in the given order */
- li r5, 16
- addi r3,r3,-4
-#if ( PPC_USE_DATA_CACHE )
- dcbz r5, r3
-#endif
- stw r1, GP_1+4(r3)
- stw r2, GP_2+4(r3)
-#if (PPC_USE_MULTIPLE == 1)
- addi r3, r3, GP_14+4
-#if ( PPC_USE_DATA_CACHE )
- dcbz r5, r3
-#endif
-
- addi r3, r3, GP_18-GP_14
-#if ( PPC_USE_DATA_CACHE )
- dcbz r5, r3
-#endif
- addi r3, r3, GP_22-GP_18
-#if ( PPC_USE_DATA_CACHE )
- dcbz r5, r3
-#endif
- addi r3, r3, GP_26-GP_22
-#if ( PPC_USE_DATA_CACHE )
- dcbz r5, r3
-#endif
- stmw r13, GP_13-GP_26(r3)
-#else
- stw r13, GP_13+4(r3)
- stwu r14, GP_14+4(r3)
-#if ( PPC_USE_DATA_CACHE )
- dcbz r5, r3
-#endif
- stw r15, GP_15-GP_14(r3)
- stw r16, GP_16-GP_14(r3)
- stw r17, GP_17-GP_14(r3)
- stwu r18, GP_18-GP_14(r3)
-#if ( PPC_USE_DATA_CACHE )
- dcbz r5, r3
-#endif
- stw r19, GP_19-GP_18(r3)
- stw r20, GP_20-GP_18(r3)
- stw r21, GP_21-GP_18(r3)
- stwu r22, GP_22-GP_18(r3)
-#if ( PPC_USE_DATA_CACHE )
- dcbz r5, r3
-#endif
- stw r23, GP_23-GP_22(r3)
- stw r24, GP_24-GP_22(r3)
- stw r25, GP_25-GP_22(r3)
- stwu r26, GP_26-GP_22(r3)
-#if ( PPC_USE_DATA_CACHE )
- dcbz r5, r3
-#endif
- stw r27, GP_27-GP_26(r3)
- stw r28, GP_28-GP_26(r3)
- stw r29, GP_29-GP_26(r3)
- stw r30, GP_30-GP_26(r3)
- stw r31, GP_31-GP_26(r3)
-#endif
-#if ( PPC_USE_DATA_CACHE )
- dcbt r0, r4
-#endif
- mfcr r6
- stw r6, GP_CR-GP_26(r3)
- mflr r7
- stw r7, GP_PC-GP_26(r3)
- mfmsr r8
- stw r8, GP_MSR-GP_26(r3)
-
-#if ( PPC_USE_DATA_CACHE )
- dcbt r5, r4
-#endif
- lwz r1, GP_1(r4)
- lwz r2, GP_2(r4)
-#if (PPC_USE_MULTIPLE == 1)
- addi r4, r4, GP_15
-#if ( PPC_USE_DATA_CACHE )
- dcbt r5, r4
-#endif
- addi r4, r4, GP_19-GP_15
-#if ( PPC_USE_DATA_CACHE )
- dcbt r5, r4
-#endif
- addi r4, r4, GP_23-GP_19
-#if ( PPC_USE_DATA_CACHE )
- dcbt r5, r4
-#endif
- addi r4, r4, GP_27-GP_23
-#if ( PPC_USE_DATA_CACHE )
- dcbt r5, r4
-#endif
- lmw r13, GP_13-GP_27(r4)
-#else
- lwz r13, GP_13(r4)
- lwz r14, GP_14(r4)
- lwzu r15, GP_15(r4)
-#if ( PPC_USE_DATA_CACHE )
- dcbt r5, r4
-#endif
- lwz r16, GP_16-GP_15(r4)
- lwz r17, GP_17-GP_15(r4)
- lwz r18, GP_18-GP_15(r4)
- lwzu r19, GP_19-GP_15(r4)
-#if ( PPC_USE_DATA_CACHE )
- dcbt r5, r4
-#endif
- lwz r20, GP_20-GP_19(r4)
- lwz r21, GP_21-GP_19(r4)
- lwz r22, GP_22-GP_19(r4)
- lwzu r23, GP_23-GP_19(r4)
-#if ( PPC_USE_DATA_CACHE )
- dcbt r5, r4
-#endif
- lwz r24, GP_24-GP_23(r4)
- lwz r25, GP_25-GP_23(r4)
- lwz r26, GP_26-GP_23(r4)
- lwzu r27, GP_27-GP_23(r4)
-#if ( PPC_USE_DATA_CACHE )
- dcbt r5, r4
-#endif
- lwz r28, GP_28-GP_27(r4)
- lwz r29, GP_29-GP_27(r4)
- lwz r30, GP_30-GP_27(r4)
- lwz r31, GP_31-GP_27(r4)
-#endif
- lwz r6, GP_CR-GP_27(r4)
- lwz r7, GP_PC-GP_27(r4)
- lwz r8, GP_MSR-GP_27(r4)
- mtcrf 255, r6
- mtlr r7
- mtmsr r8
-#endif
-#if (PPC_CACHE_ALIGNMENT == 32)
- /* This assumes that all the registers are in the given order */
- li r5, 32
- addi r3,r3,-4
-#if ( PPC_USE_DATA_CACHE )
- dcbz r5, r3
-#endif
- stw r1, GP_1+4(r3)
- stw r2, GP_2+4(r3)
-#if (PPC_USE_MULTIPLE == 1)
- addi r3, r3, GP_18+4
-#if ( PPC_USE_DATA_CACHE )
- dcbz r5, r3
-#endif
- stmw r13, GP_13-GP_18(r3)
-#else
- stw r13, GP_13+4(r3)
- stw r14, GP_14+4(r3)
- stw r15, GP_15+4(r3)
- stw r16, GP_16+4(r3)
- stw r17, GP_17+4(r3)
- stwu r18, GP_18+4(r3)
-#if ( PPC_USE_DATA_CACHE )
- dcbz r5, r3
-#endif
- stw r19, GP_19-GP_18(r3)
- stw r20, GP_20-GP_18(r3)
- stw r21, GP_21-GP_18(r3)
- stw r22, GP_22-GP_18(r3)
- stw r23, GP_23-GP_18(r3)
- stw r24, GP_24-GP_18(r3)
- stw r25, GP_25-GP_18(r3)
- stw r26, GP_26-GP_18(r3)
- stw r27, GP_27-GP_18(r3)
- stw r28, GP_28-GP_18(r3)
- stw r29, GP_29-GP_18(r3)
- stw r30, GP_30-GP_18(r3)
- stw r31, GP_31-GP_18(r3)
-#endif
-#if ( PPC_USE_DATA_CACHE )
- dcbt r0, r4
-#endif
- mfcr r6
- stw r6, GP_CR-GP_18(r3)
- mflr r7
- stw r7, GP_PC-GP_18(r3)
- mfmsr r8
- stw r8, GP_MSR-GP_18(r3)
-
-#if ( PPC_USE_DATA_CACHE )
- dcbt r5, r4
-#endif
- lwz r1, GP_1(r4)
- lwz r2, GP_2(r4)
-#if (PPC_USE_MULTIPLE == 1)
- addi r4, r4, GP_19
-#if ( PPC_USE_DATA_CACHE )
- dcbt r5, r4
-#endif
- lmw r13, GP_13-GP_19(r4)
-#else
- lwz r13, GP_13(r4)
- lwz r14, GP_14(r4)
- lwz r15, GP_15(r4)
- lwz r16, GP_16(r4)
- lwz r17, GP_17(r4)
- lwz r18, GP_18(r4)
- lwzu r19, GP_19(r4)
-#if ( PPC_USE_DATA_CACHE )
- dcbt r5, r4
-#endif
- lwz r20, GP_20-GP_19(r4)
- lwz r21, GP_21-GP_19(r4)
- lwz r22, GP_22-GP_19(r4)
- lwz r23, GP_23-GP_19(r4)
- lwz r24, GP_24-GP_19(r4)
- lwz r25, GP_25-GP_19(r4)
- lwz r26, GP_26-GP_19(r4)
- lwz r27, GP_27-GP_19(r4)
- lwz r28, GP_28-GP_19(r4)
- lwz r29, GP_29-GP_19(r4)
- lwz r30, GP_30-GP_19(r4)
- lwz r31, GP_31-GP_19(r4)
-#endif
- lwz r6, GP_CR-GP_19(r4)
- lwz r7, GP_PC-GP_19(r4)
- lwz r8, GP_MSR-GP_19(r4)
- mtcrf 255, r6
- mtlr r7
- mtmsr r8
-#endif
- blr
-
-/*
- * _CPU_Context_restore
- *
- * This routine is generallu used only to restart self in an
- * efficient manner. It may simply be a label in _CPU_Context_switch.
- *
- * NOTE: May be unnecessary to reload some registers.
- */
-/*
- * ACB: Don't worry about cache optimisation here - this is not THAT critical.
- */
- ALIGN (PPC_CACHE_ALIGNMENT, PPC_CACHE_ALIGN_POWER)
- PUBLIC_PROC (_CPU_Context_restore)
-PROC (_CPU_Context_restore):
- lwz r5, GP_CR(r3)
- lwz r6, GP_PC(r3)
- lwz r7, GP_MSR(r3)
- mtcrf 255, r5
- mtlr r6
- mtmsr r7
- lwz r1, GP_1(r3)
- lwz r2, GP_2(r3)
-#if (PPC_USE_MULTIPLE == 1)
- lmw r13, GP_13(r3)
-#else
- lwz r13, GP_13(r3)
- lwz r14, GP_14(r3)
- lwz r15, GP_15(r3)
- lwz r16, GP_16(r3)
- lwz r17, GP_17(r3)
- lwz r18, GP_18(r3)
- lwz r19, GP_19(r3)
- lwz r20, GP_20(r3)
- lwz r21, GP_21(r3)
- lwz r22, GP_22(r3)
- lwz r23, GP_23(r3)
- lwz r24, GP_24(r3)
- lwz r25, GP_25(r3)
- lwz r26, GP_26(r3)
- lwz r27, GP_27(r3)
- lwz r28, GP_28(r3)
- lwz r29, GP_29(r3)
- lwz r30, GP_30(r3)
- lwz r31, GP_31(r3)
-#endif
-
- blr
-
-/* Individual interrupt prologues look like this:
- * #if (PPC_ABI == PPC_ABI_POWEROPEN || PPC_ABI == PPC_ABI_GCC27)
- * #if (PPC_HAS_FPU)
- * stwu r1, -(20*4 + 18*8 + IP_END)(r1)
- * #else
- * stwu r1, -(20*4 + IP_END)(r1)
- * #endif
- * #else
- * stwu r1, -(IP_END)(r1)
- * #endif
- * stw r0, IP_0(r1)
- *
- * li r0, vectornum
- * b PROC (_ISR_Handler{,C})
- */
-
-/* void __ISR_Handler()
- *
- * This routine provides the RTEMS interrupt management.
- * The vector number is in r0. R0 has already been stacked.
- *
- */
- ALIGN (PPC_CACHE_ALIGNMENT, PPC_CACHE_ALIGN_POWER)
- PUBLIC_PROC (_ISR_Handler)
-PROC (_ISR_Handler):
-#define LABEL(x) x
-/* XXX ??
-#define MTSAVE(x) mtspr sprg0, x
-#define MFSAVE(x) mfspr x, sprg0
-*/
-#define MTPC(x) mtspr srr0, x
-#define MFPC(x) mfspr x, srr0
-#define MTMSR(x) mtspr srr1, x
-#define MFMSR(x) mfspr x, srr1
-
- #include "irq_stub.S"
- rfi
-
-#if (PPC_HAS_RFCI == 1)
-/* void __ISR_HandlerC()
- *
- * This routine provides the RTEMS interrupt management.
- * For critical interrupts
- *
- */
- ALIGN (PPC_CACHE_ALIGNMENT, PPC_CACHE_ALIGN_POWER)
- PUBLIC_PROC (_ISR_HandlerC)
-PROC (_ISR_HandlerC):
-#undef LABEL
-#undef MTSAVE
-#undef MFSAVE
-#undef MTPC
-#undef MFPC
-#undef MTMSR
-#undef MFMSR
-#define LABEL(x) x##_C
-/* XXX??
-#define MTSAVE(x) mtspr sprg1, x
-#define MFSAVE(x) mfspr x, sprg1
-*/
-#define MTPC(x) mtspr srr2, x
-#define MFPC(x) mfspr x, srr2
-#define MTMSR(x) mtspr srr3, x
-#define MFMSR(x) mfspr x, srr3
- #include "irq_stub.S"
- rfci
-#endif
-
-/* PowerOpen descriptors for indirect function calls.
- */
-
-#if (PPC_ABI == PPC_ABI_POWEROPEN)
- DESCRIPTOR (_CPU_Context_save_fp)
- DESCRIPTOR (_CPU_Context_restore_fp)
- DESCRIPTOR (_CPU_Context_switch)
- DESCRIPTOR (_CPU_Context_restore)
- DESCRIPTOR (_ISR_Handler)
-#if (PPC_HAS_RFCI == 1)
- DESCRIPTOR (_ISR_HandlerC)
-#endif
-#endif
diff --git a/c/src/exec/score/cpu/powerpc/other_cpu/irq_stub.S b/c/src/exec/score/cpu/powerpc/other_cpu/irq_stub.S
deleted file mode 100644
index 76c8927305..0000000000
--- a/c/src/exec/score/cpu/powerpc/other_cpu/irq_stub.S
+++ /dev/null
@@ -1,268 +0,0 @@
-/*
- * This file contains the interrupt handler assembly code for the PowerPC
- * implementation of RTEMS. It is #included from cpu_asm.s.
- *
- * Author: Andrew Bray <andy@i-cubed.co.uk>
- *
- * COPYRIGHT (c) 1995 by i-cubed ltd.
- *
- * To anyone who acknowledges that this file is provided "AS IS"
- * without any express or implied warranty:
- * permission to use, copy, modify, and distribute this file
- * for any purpose is hereby granted without fee, provided that
- * the above copyright notice and this notice appears in all
- * copies, and that the name of i-cubed limited not be used in
- * advertising or publicity pertaining to distribution of the
- * software without specific, written prior permission.
- * i-cubed limited makes no representations about the suitability
- * of this software for any purpose.
- *
- * $Id$
- */
-
-/* void __ISR_Handler()
- *
- * This routine provides the RTEMS interrupt management.
- * The vector number is in r0. R0 has already been stacked.
- *
- */
- PUBLIC_VAR (_CPU_IRQ_info )
-
- /* Finish off the interrupt frame */
- stw r2, IP_2(r1)
- stw r3, IP_3(r1)
- stw r4, IP_4(r1)
- stw r5, IP_5(r1)
- stw r6, IP_6(r1)
- stw r7, IP_7(r1)
- stw r8, IP_8(r1)
- stw r9, IP_9(r1)
- stw r10, IP_10(r1)
- stw r11, IP_11(r1)
- stw r12, IP_12(r1)
- stw r13, IP_13(r1)
- stmw r28, IP_28(r1)
- mfcr r5
- mfctr r6
- mfxer r7
- mflr r8
- MFPC (r9)
- MFMSR (r10)
- /* Establish addressing */
-#if (PPC_USE_SPRG)
- mfspr r11, sprg3
-#else
- lis r11,_CPU_IRQ_info@ha
- addi r11,r11,_CPU_IRQ_info@l
-#endif
- dcbt r0, r11
- stw r5, IP_CR(r1)
- stw r6, IP_CTR(r1)
- stw r7, IP_XER(r1)
- stw r8, IP_LR(r1)
- stw r9, IP_PC(r1)
- stw r10, IP_MSR(r1)
-
- lwz r30, Vector_table(r11)
- slwi r4,r0,2
- lwz r28, Nest_level(r11)
- add r4, r4, r30
-
- lwz r30, 0(r28)
- mr r3, r0
- lwz r31, Stack(r11)
- /*
- * #if ( CPU_HAS_SOFTWARE_INTERRUPT_STACK == TRUE )
- * if ( _ISR_Nest_level == 0 )
- * switch to software interrupt stack
- * #endif
- */
- /* Switch stacks, here we must prevent ALL interrupts */
-#if (PPC_USE_SPRG)
- mfmsr r5
- mfspr r6, sprg2
-#else
- lwz r6,msr_initial(r11)
- lis r5,~PPC_MSR_DISABLE_MASK@ha
- ori r5,r5,~PPC_MSR_DISABLE_MASK@l
- and r6,r6,r5
- mfmsr r5
-#endif
- mtmsr r6
- cmpwi r30, 0
- lwz r29, Disable_level(r11)
- subf r31,r1,r31
- bne LABEL (nested)
- stwux r1,r1,r31
-LABEL (nested):
- /*
- * _ISR_Nest_level++;
- */
- lwz r31, 0(r29)
- addi r30,r30,1
- stw r30,0(r28)
- /* From here on out, interrupts can be re-enabled. RTEMS
- * convention says not.
- */
- lwz r4,0(r4)
- /*
- * _Thread_Dispatch_disable_level++;
- */
- addi r31,r31,1
- stw r31, 0(r29)
-/* SCE 980217
- *
- * We need address translation ON when we call our ISR routine
-
- mtmsr r5
-
- */
-
- /*
- * (*_ISR_Vector_table[ vector ])( vector );
- */
-#if (PPC_ABI == PPC_ABI_POWEROPEN)
- lwz r6,0(r4)
- lwz r2,4(r4)
- mtlr r6
- lwz r11,8(r4)
-#endif
-#if (PPC_ABI == PPC_ABI_GCC27)
- lwz r2, Default_r2(r11)
- mtlr r4
- #lwz r2, 0(r2)
-#endif
-#if (PPC_ABI == PPC_ABI_SVR4 || PPC_ABI == PPC_ABI_EABI)
- mtlr r4
- lwz r2, Default_r2(r11)
- lwz r13, Default_r13(r11)
- #lwz r2, 0(r2)
- #lwz r13, 0(r13)
-#endif
- mr r4,r1
- blrl
- /* NOP marker for debuggers */
- or r6,r6,r6
-
- /* We must re-disable the interrupts */
-#if (PPC_USE_SPRG)
- mfspr r11, sprg3
- mfspr r0, sprg2
-#else
- lis r11,_CPU_IRQ_info@ha
- addi r11,r11,_CPU_IRQ_info@l
- lwz r0,msr_initial(r11)
- lis r30,~PPC_MSR_DISABLE_MASK@ha
- ori r30,r30,~PPC_MSR_DISABLE_MASK@l
- and r0,r0,r30
-#endif
- mtmsr r0
- lwz r30, 0(r28)
- lwz r31, 0(r29)
-
- /*
- * if (--Thread_Dispatch_disable,--_ISR_Nest_level)
- * goto easy_exit;
- */
- addi r30, r30, -1
- cmpwi r30, 0
- addi r31, r31, -1
- stw r30, 0(r28)
- stw r31, 0(r29)
- bne LABEL (easy_exit)
- cmpwi r31, 0
-
- lwz r30, Switch_necessary(r11)
-
- /*
- * #if ( CPU_HAS_SOFTWARE_INTERRUPT_STACK == TRUE )
- * restore stack
- * #endif
- */
- lwz r1,0(r1)
- bne LABEL (easy_exit)
- lwz r30, 0(r30)
- lwz r31, Signal(r11)
-
- /*
- * if ( _Context_Switch_necessary )
- * goto switch
- */
- cmpwi r30, 0
- lwz r28, 0(r31)
- li r6,0
- bne LABEL (switch)
- /*
- * if ( !_ISR_Signals_to_thread_executing )
- * goto easy_exit
- * _ISR_Signals_to_thread_executing = 0;
- */
- cmpwi r28, 0
- beq LABEL (easy_exit)
-
- /*
- * switch:
- * call _Thread_Dispatch() or prepare to return to _ISR_Dispatch
- */
-LABEL (switch):
- stw r6, 0(r31)
- /* Re-enable interrupts */
- lwz r0, IP_MSR(r1)
-#if (PPC_ABI == PPC_ABI_POWEROPEN)
- lwz r2, Dispatch_r2(r11)
-#else
- /* R2 and R13 still hold their values from the last call */
-#endif
- mtmsr r0
- bl SYM (_Thread_Dispatch)
- /* NOP marker for debuggers */
- or r6,r6,r6
- /*
- * prepare to get out of interrupt
- */
- /* Re-disable IRQs */
-#if (PPC_USE_SPRG)
- mfspr r0, sprg2
-#else
- lis r11,_CPU_IRQ_info@ha
- addi r11,r11,_CPU_IRQ_info@l
- lwz r0,msr_initial(r11)
- lis r5,~PPC_MSR_DISABLE_MASK@ha
- ori r5,r5,~PPC_MSR_DISABLE_MASK@l
- and r0,r0,r5
-#endif
- mtmsr r0
-
- /*
- * easy_exit:
- * prepare to get out of interrupt
- * return from interrupt
- */
-LABEL (easy_exit):
- lwz r5, IP_CR(r1)
- lwz r6, IP_CTR(r1)
- lwz r7, IP_XER(r1)
- lwz r8, IP_LR(r1)
- lwz r9, IP_PC(r1)
- lwz r10, IP_MSR(r1)
- mtcrf 255,r5
- mtctr r6
- mtxer r7
- mtlr r8
- MTPC (r9)
- MTMSR (r10)
- lwz r0, IP_0(r1)
- lwz r2, IP_2(r1)
- lwz r3, IP_3(r1)
- lwz r4, IP_4(r1)
- lwz r5, IP_5(r1)
- lwz r6, IP_6(r1)
- lwz r7, IP_7(r1)
- lwz r8, IP_8(r1)
- lwz r9, IP_9(r1)
- lwz r10, IP_10(r1)
- lwz r11, IP_11(r1)
- lwz r12, IP_12(r1)
- lwz r13, IP_13(r1)
- lmw r28, IP_28(r1)
- lwz r1, 0(r1)
diff --git a/c/src/exec/score/cpu/powerpc/other_cpu/ppccache.c b/c/src/exec/score/cpu/powerpc/other_cpu/ppccache.c
deleted file mode 100644
index ecfb4b96ca..0000000000
--- a/c/src/exec/score/cpu/powerpc/other_cpu/ppccache.c
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * PowerPC Cache enable routines
- *
- * $Id$
- */
-
-#include <rtems/system.h>
-
-#define PPC_Get_HID0( _value ) \
- do { \
- _value = 0; /* to avoid warnings */ \
- asm volatile( \
- "mfspr %0, 0x3f0;" /* get HID0 */ \
- "isync" \
- : "=r" (_value) \
- : "0" (_value) \
- ); \
- } while (0)
-
-#define PPC_Set_HID0( _value ) \
- do { \
- asm volatile( \
- "isync;" \
- "mtspr 0x3f0, %0;" /* load HID0 */ \
- "isync" \
- : "=r" (_value) \
- : "0" (_value) \
- ); \
- } while (0)
-
-
-void powerpc_instruction_cache_enable ()
-{
- unsigned32 value;
-
- /*
- * Enable the instruction cache
- */
-
- PPC_Get_HID0( value );
-
- value |= 0x00008000; /* Set ICE bit */
-
- PPC_Set_HID0( value );
-}
-
-void powerpc_data_cache_enable ()
-{
- unsigned32 value;
-
- /*
- * enable data cache
- */
-
- PPC_Get_HID0( value );
-
- value |= 0x00004000; /* set DCE bit */
-
- PPC_Set_HID0( value );
-}
-
diff --git a/c/src/exec/score/cpu/powerpc/other_cpu/rtems.S b/c/src/exec/score/cpu/powerpc/other_cpu/rtems.S
deleted file mode 100644
index b653152411..0000000000
--- a/c/src/exec/score/cpu/powerpc/other_cpu/rtems.S
+++ /dev/null
@@ -1,132 +0,0 @@
-/* rtems.s
- *
- * This file contains the single entry point code for
- * the PowerPC implementation of RTEMS.
- *
- * Author: Andrew Bray <andy@i-cubed.co.uk>
- *
- * COPYRIGHT (c) 1995 by i-cubed ltd.
- *
- * To anyone who acknowledges that this file is provided "AS IS"
- * without any express or implied warranty:
- * permission to use, copy, modify, and distribute this file
- * for any purpose is hereby granted without fee, provided that
- * the above copyright notice and this notice appears in all
- * copies, and that the name of i-cubed limited not be used in
- * advertising or publicity pertaining to distribution of the
- * software without specific, written prior permission.
- * i-cubed limited makes no representations about the suitability
- * of this software for any purpose.
- *
- * Derived from c/src/exec/cpu/no_cpu/rtems.c:
- *
- * COPYRIGHT (c) 1989-1997.
- * On-Line Applications Research Corporation (OAR).
- * Copyright assigned to U.S. Government, 1994.
- *
- * The license and distribution terms for this file may in
- * the file LICENSE in this distribution or at
- * http://www.OARcorp.com/rtems/license.html.
- *
- * $Id$
- */
-
-#include <asm.h>
-
- BEGIN_CODE
-/*
- * RTEMS
- *
- * This routine jumps to the directive indicated in r11.
- * This routine is used when RTEMS is linked by itself and placed
- * in ROM. This routine is the first address in the ROM space for
- * RTEMS. The user "calls" this address with the directive arguments
- * in the normal place.
- * This routine then jumps indirectly to the correct directive
- * preserving the arguments. The directive should not realize
- * it has been "wrapped" in this way. The table "_Entry_points"
- * is used to look up the directive.
- */
-
- ALIGN (4, 2)
- PUBLIC_PROC (RTEMS)
-PROC (RTEMS):
-#if (PPC_ABI == PPC_ABI_POWEROPEN)
- mflr r0
- stw r0, 8(r1)
- stwu r1, -64(r1)
-
- /* Establish addressing */
- bl base
-base:
- mflr r12
- addi r12, r12, tabaddr - base
-
- lwz r12, Entry_points-abase(r12)
- slwi r11, r11, 2
- lwzx r12, r12, r11
-
- stw r2, 56(r1)
- lwz r0, 0(r12)
- mtlr r0
- lwz r2, 4(r12)
- lwz r11, 8(r12)
- blrl
- lwz r2, 56(r1)
- addi r1, r1, 64
- lwz r0, 8(r1)
- mtlr r0
-#else
- mflr r0
- stw r0, 4(r1)
- stwu r1, -16(r1)
-
- /* Establish addressing */
- bl base
-base:
- mflr r12
- addi r12, r12, tabaddr - base
-
- lwz r12, Entry_points-abase(r12)
- slwi r11, r11, 2
- lwzx r11, r12, r11
-
- stw r2, 8(r1)
-#if (PPC_ABI != PPC_ABI_GCC27)
- stw r13, 12(r1)
-#endif
- mtlr r11
- lwz r11, irqinfo-abase(r12)
- lwz r2, 0(r11)
-#if (PPC_ABI != PPC_ABI_GCC27)
- lwz r13, 4(r11)
-#endif
- blrl
- lwz r2, 8(r1)
-#if (PPC_ABI != PPC_ABI_GCC27)
- lwz r13, 12(r1)
-#endif
- addi r1, r1, 16
- lwz r0, 4(r1)
- mtlr r0
-#endif
- blr
-
-
- /* Addressability stuff */
-tabaddr:
-abase:
- EXTERN_VAR (_Entry_points)
-Entry_points:
- EXT_SYM_REF (_Entry_points)
-#if (PPC_ABI != PPC_ABI_POWEROPEN)
- EXTERN_VAR (_CPU_IRQ_info)
-irqinfo:
- EXT_SYM_REF (_CPU_IRQ_info)
-#endif
-
-#if (PPC_ABI == PPC_ABI_POWEROPEN)
- DESCRIPTOR (RTEMS)
-#endif
-
-