diff options
| -rw-r--r-- | make/ChangeLog | 5 | ||||
| -rw-r--r-- | make/Makefile.am | 2 | ||||
| -rw-r--r-- | make/compilers/gcc-portsw.cfg | 284 |
3 files changed, 6 insertions, 285 deletions
diff --git a/make/ChangeLog b/make/ChangeLog index c18ca6f2e9..0a0cdbd200 100644 --- a/make/ChangeLog +++ b/make/ChangeLog @@ -1,3 +1,8 @@ +2005-01-01 Ralf Corsepius <ralf.corsepius@rtems.org> + + * compilers/gcc-portsw.cfg: Remove. + * Makefile.am: Reflect change above. + 2004-11-23 Joel Sherrill <joel@OARcorp.com> * Makefile.am: Remove eth_comm. diff --git a/make/Makefile.am b/make/Makefile.am index da61a4e058..3f3e1eff86 100644 --- a/make/Makefile.am +++ b/make/Makefile.am @@ -13,7 +13,7 @@ rtems_make_Templatesdir = $(rtems_makedir)/Templates dist_rtems_make_Templates_DATA = Templates/Makefile.dir \ Templates/Makefile.leaf Templates/Makefile.lib -EXTRA_DIST += compilers/gcc-no_bsp.cfg compilers/gcc-portsw.cfg \ +EXTRA_DIST += compilers/gcc-no_bsp.cfg \ compilers/gcc-target-default.cfg rtems_make_customdir = $(rtems_makedir)/custom diff --git a/make/compilers/gcc-portsw.cfg b/make/compilers/gcc-portsw.cfg deleted file mode 100644 index ece83237e2..0000000000 --- a/make/compilers/gcc-portsw.cfg +++ /dev/null @@ -1,284 +0,0 @@ -# -# gcc-no_bsp.cfg,v 1.13 1995/12/19 19:59:57 joel Exp -# -# This is for the amd29k portsw board. -# -# THIS IS NOT A GNU TOOLS BASED PORT!!! -# - -# Prefix on the installed GNU tools -# Just use the native tools -GNU_TOOLS_PREFIX= - -# Additional target names (other than debug) -TARGET_VARIANTS += - -# -# Pre-processor defines. -# Local tailoring (on the command line) can be done by setting XCPPFLAGS -# which is never set in the Makefile's -# -# Possible defines include: -# -DRTEMS_LIBC using libc bundled with RTEMS -# -DRTEMS_NEWLIB using CYGNUS libc -# -DMALLOC_PROVIDED must be used for newlib reent struct - -DEFINES:= $(LIBC_DEFINES) - -GCC_INCLUDE=. - -# Note: normally we do not want the standard include files -# Also we usually include a "libc_include" directory -CPPFLAGS=$(XCPPFLAGS) $(DEFINES) \ - -I$(RTEMS_LIBC_DIR)/include \ - -I$(PROJECT_INCLUDE) \ - -I/opt/29k/src/inc - -# -# Local tailoring (on the command line) can be done by setting XCFLAGS -# which is never set in the Makefile's -# - -# -# CFLAGS_OPTIMIZE_V, CFLAGS_DEBUG_V are the values we -# would want the corresponding macros to be set to. -# -# CFLAGS_OPTIMIZE, CFLAGS_DEBUG are set in the leaf -# Makefiles by the 'debug:' targets to their _V values. -# - -# default flags - -#CFLAGS_DEFAULT = -NB -bwc -nocrt0 -Ml -m -g -Hon=Pointers_compatible -Hon=Pointers_compatible_with_ints -Dinline= -D___AM29K__ -Hnocopyr -CFLAGS_DEFAULT = $(CPU_CFLAGS) -Wall - -# optimize flag: typically -0, could use -O4 or -fast -# -O4 is ok for RTEMS -# -Os to optimize for size -CFLAGS_OPTIMIZE_V=-Os - -# debug flag; typically -g -CFLAGS_DEBUG_V=-g -O0 -DRTEMS_DEBUG -DSTACK_CHECKER_ON - -# default is to optimize -CFLAGS_OPTIMIZE=$(CFLAGS_OPTIMIZE_V) - -# dynamic libraries -CFLAGS_DYNAMIC_V=-fpic -#ASFLAGS_DYNAMIC_V= - -CFLAGS=$(CFLAGS_DEFAULT) $(CFLAGS_OPTIMIZE) $(CFLAGS_DEBUG) - -# List of library paths without -L -LD_PATHS= $(PROJECT_RELEASE)/lib - -# libraries you want EVERYONE to link with -LD_LIBS= - -# ld flag to ensure pure-text -LDFLAGS_MUST_BE_PURE_V = - -# ld flag for [un]shared objects -LDFLAGS_STATIC_LIBRARIES_V = -LDFLAGS_SHARED_LIBRARIES_V = - -# ld flag for incomplete link -LDFLAGS_INCOMPLETE = -i - -# Special linker options when building lib.so -LDFLAGS_DYNAMIC_V = ?? - -# Some dynamic linking systems want the preferred name recorded in the binary -# ref: src/libxil/Makefile -LDFLAGS_DYNAMIC_LIBNAME_V = -h $(DYNAMIC_VERSION_LIBNAME) - -# ld flags for profiling, debugging -LDFLAGS_DEBUG_V = - -LDFLAGS=$(LDFLAGS_DEBUG) $(LD_PATHS:%=-L %) - -# -# Stuff to clean and clobber for the compiler and its tools -# - -CLEAN_CC = a.out *.o *.BAK -CLOBBER_CC = - -# -# Client compiler and support tools -# - -CC=/opt/29k/bin/hc29 -CXX=$(CC) -CCC=$(CXX) - -# CPP command to write file to standard output -CPP=$(CC) -E - -AS=/opt/29k/bin/as29 -ASPP=ERROR_NO_ASPP - -ASFLAGS=-l -fcgimosx - -# NOTE: should never use full path .. but there is no guarantee ld, etc -# will be in the same directory as gcc.. so hope they are in the path -# Don't do this on a real target!!! -LD=/opt/29k/bin/ld29 -NM=/opt/29k/bin/nm29 -AR=echo making library -# egrep regexp to ignore symbol table entries in ar archives. -# Only used to make sure we skip them when coalescing libraries. -# skip __.SYMDEF and empty names (maybe bug in ranlib??). -AR_SYMBOL_TABLE="HIGHLY-UNLIKELY-TO-CONFLICT" -ARFLAGS=ruv - -# NOTE: see comment on ld, nm, ar -SIZE=size - -# -# Command to convert a normal archive to one searchable by $(LD) -# Not needed on SVR4 -# - -MKLIB=/opt/29k/bin/lib29 - -# -# How to compile stuff into ${ARCH} subdirectory -# -# NOTE: we override COMPILE.c -# - -COMPILE.c=$(CC) -c $(CFLAGS) $(CPPFLAGS) $(XCFLAGS) - -${ARCH}/%.o: %.c - ${COMPILE.c} -o $@ $< - $(CHMOD) -f g+w $@ - -${ARCH}/%.o: %.cc - ${COMPILE.c} -o $@ $< - $(CHMOD) -f g+w $@ - -${ARCH}/%.o: %.s - ${COMPILE.c} -DASM -o $@ $< - $(CHMOD) -f g+w $@ - -${ARCH}/%.o: %.S - $(CP) $*.s $(ARCH)/$*.c - $(CPP) $(CPPFLAGS) $(ARCH)/$*.c > $(ARCH)/$*.s - ${COMPILE.c} -o $@ $(ARCH)/$*.s - $(CHMOD) -f g+w $@ - $(RM) $(ARCH)/$*.c - -# Specify our own default rule for this to prevent having CFLAGS and -# CPPFLAGS being passed to linker -${ARCH}/%: ${ARCH}/%.o - ${CC} ${LDFLAGS} -o $@ $@.o ${LD_LIBS} - $(CHMOD) -f g+w $@ - -# Make foo.rel from foo.o -${ARCH}/%.rel: ${ARCH}/%.o - ${LD} $(LDFLAGS_INCOMPLETE) -o $@ $^ - $(CHMOD) -f g+w $@ - -# create $(ARCH)/pgm from pgm.sh -${ARCH}/%: %.sh - $(RM) $@ - $(CP) $< $@ - $(CHMOD) +x $@ - $(CHMOD) -f g+w $@ - -# Dependency files for use by gmake -# NOTE: we don't put them into $(ARCH) -# so that 'make clean' doesn't blow it away - -DEPEND=Depends-${ARCH} - -CLEAN_DEPEND=$(DEPEND).tmp -CLOBBER_DEPEND=$(DEPEND) - -# We deliberately don't have anything depend on the -# $(DEPEND) file; otherwise it will get rebuilt even -# on 'make clean' -# - -depend: $(C_FILES) $(CC_FILES) $(S_FILES) -ifneq ($(words $(C_FILES) $(CC_FILES) $(S_FILES)), 0) -# Use gcc -M to generate dependencies -# Replace foo.o with $(ARCH)/foo.o -# Replace $(ARCH) value with string $(ARCH) -# so that it will for debug cases - $(COMPILE.c) -Hmake $^ | \ - $(SED) -e 's?^\(.*\)\.o[ ]*:?$$(ARCH)/\1.o:?' \ - -e 's?$(ARCH)/?$$(ARCH)/?' >$(DEPEND).tmp - - $(MV) $(DEPEND).tmp $(DEPEND) - $(CHMOD) -f g+w $(DEPEND) -endif - - -# spell out all the LINK_FILE's, rather than using -lbsp, so -# that $(LINK_FILES) can be a dependency - -# Start file must be one of -# $(PROJECT_RELEASE)/lib/start$(LIB_VARIANT).o -# $(PROJECT_RELEASE)/lib/asmiface$(LIB_VARIANT).o -# It defaults to start.o, but an app can override it. - -# Note: Normally RTEMS provides a start file... -START_FILE= $(PROJECT_RELEASE)/lib/crt0$(LIB_VARIANT).o $(PROJECT_RELEASE)/lib/register$(LIB_VARIANT).o - -LIBC_LOW= $(PROJECT_RELEASE)/lib/libcsupport$(LIBSUFFIX_VA) - -LIBGCC = $(shell $(CC) $(CFLAGS) -print-libgcc-file-name $(GCCSED)) - -LIBOSBOOT=/home/src/amd29k/sps2000/netrom.o - -LINK_FILES= \ - $(START_FILE) \ - $(OBJS) \ - $(MANAGERS_NOT_WANTED:%=$(PROJECT_RELEASE)/lib/no-%$(LIB_VARIANT).rel) \ - $(PROJECT_RELEASE)/lib/libbsp$(LIBSUFFIX_VA) \ - $(LD_LIBS) \ - $(PROJECT_RELEASE)/lib/libtest$(LIBSUFFIX_VA) \ - $(PROJECT_RELEASE)/lib/librtems$(LIBSUFFIX_VA) \ - $(LIBC_LOW) \ - $(PROJECT_RELEASE)/lib/libmisc$(LIBSUFFIX_VA) \ - $(LIBC_LIBC) \ - $(LIBC_EXTRALIBS) \ - $(LIBC_LIBM) -# /home/craigl/osbdbg.o - -# Here is the rule to actually build a $(ARCH)/foo.exe -# It also builds $(ARCH)/foo.sr and $(ARCH)/foo.nm -# Usage ref: src/tests/sptest/sp1/Makefile - -define make-exe - if [ $(NO_ROM) ]; then echo "\n\nskipping ROM compile\n"; else \ - $(CC) -nocrt0 -cmd$(PROJECT_RELEASE)/lib/romlink -u _times -u _gettimeofday \ - -u _sleep -o $(basename $@).out $(LIBOSBOOT) $(LINK_FILES); \ - romcoff -r -t -l -b $(basename $@).out raminit.o; \ - rm $(basename $@).out; \ - $(CC) -m -u _times -u _gettimeofday -u _sleep -o $(basename $@).romcof $(LIBOSBOOT) \ - $(LINK_FILES) raminit.o -nocrt0 -cmd$(PROJECT_RELEASE)/lib/romlink > $(basename $@).rommap ; \ - rm raminit.o ; \ - $(CHMOD) -f g+w $(basename $@).romcof; \ - /opt/green/coff2sr -noS5 $(basename $@).romcof -o $(basename $@).srec; \ - $(CHMOD) -f g+w $(basename $@).srec; \ - fi - if [ $(CREATE_MAP) ]; then \ - $(CC) -m -u _times -u _gettimeofday -u _sleep -o $(basename $@).exe $(LINK_FILES) -nocrt0 -cmd$(PROJECT_RELEASE)/lib/ramlink > $(basename $@).rammap; \ - else \ - rm $(basename $@).rommap > /dev/null 2> /dev/null ; \ - $(CC) -u _times -u _gettimeofday -u _sleep -o $(basename $@).exe $(LINK_FILES) -nocrt0 -cmd$(PROJECT_RELEASE)/lib/ramlink; \ - fi - $(CHMOD) -f g+w $(basename $@).exe -# $(CC) -o $(basename $@).exe $(LINK_FILES) -nocrt0 -cmd/opt/29k/lib/link030.cmd - $(NM) -g $(basename $@).exe > $(basename $@).num - $(CHMOD) -f g+w $(basename $@).num -# $(SIZE) $(basename $@).exe -endef - -define make-rel - $(LD) $(LDFLAGS_INCOMPLETE) $(XLDFLAGS) -o $@ $(OBJS) - $(CHMOD) -f g+w $@ -endef |