Motorola MVME2307 BSP submitted by Jay Kulpinski <jskulpin@eng01.gdds.com>.

No modifications made.

1 files changed, 112 insertions, 0 deletions

diff --git a/make/custom/mvme2307.cfg b/make/custom/mvme2307.cfg
new file mode 100644
index 0000000000..01716577c1
--- /dev/null
+++ b/make/custom/mvme2307.cfg
@@ -0,0 +1,112 @@
+#
+#  Config file for the PowerPC 60x simulator - mvme2307
+#
+#  $Id$
+#
+
+include $(RTEMS_ROOT)/make/custom/default.cfg
+
+RTEMS_CPU=powerpc
+RTEMS_CPU_MODEL=ppc604
+
+# This is the actual bsp directory used during the build process.
+RTEMS_BSP_FAMILY=mvme2307
+
+# This target does NOT support the TCP/IP stack so ignore requests
+# to enable it.
+#HAS_NETWORKING=no
+
+#  This section makes the target dependent options file.
+
+#  NDEBUG (C library)
+#     if defined asserts do not generate code.  This is commonly used
+#     as a command line option.
+#
+#  RTEMS_TEST_NO_PAUSE (RTEMS tests)
+#     do not pause between screens of output in the rtems tests
+#
+#  RTEMS_DEBUG (RTEMS)
+#     If defined, debug checks in RTEMS and support library code are enabled.
+#
+#  CONSOLE_USE_POLLED     (mvme2307_bsp)
+#  CONSOLE_USE_INTERRUPTS (mvme2307_bsp)
+#     The mvme2307 console driver has the structure to operate in either
+#     polled or interrupt mode.  However both modes only trap to the
+#     monitor currently.
+#
+#  PPC_VECTOR_FILE_BASE (PowerPC)
+#     This defines the base address of the exception table.
+#     NOTE: Vectors are actually at 0xFFF00000 but file starts at offset 0x0100
+#
+#  PPC_ABI (PowerPC)
+#     This defines the calling convention (Application Binary Interface)
+#     used in this configuration.  EABI is the only one supported.
+#
+#  PPC_ASM (PowerPC)
+#     This defines the assembly language format used in this configuration.
+#     ELF is the only one supported.
+#
+#  PPC_USE_SPRG (RTEMS PowerPC port)
+#     If defined, then the PowerPC specific code in RTEMS will use some
+#     of the special purpose registers to slightly optimize interrupt
+#     response time.  The use of these registers can conflict with 
+#     other tools like debuggers.
+#
+
+define make-target-options
+	@echo "/* #define NDEBUG 1 */ "                            >>$@
+	@echo "#define RTEMS_TEST_NO_PAUSE 1"                      >>$@
+	@echo "/* #define RTEMS_DEBUG  1 */"                       >>$@
+	@echo "#define CONSOLE_USE_INTERRUPTS 0"                   >>$@
+	@echo "#define CONSOLE_USE_POLLED !CONSOLE_USE_INTERRUPTS" >>$@
+	@echo "#define PPC_VECTOR_FILE_BASE 0x00000100"            >>$@
+	@echo "#define PPC_ABI PPC_ABI_EABI"                       >>$@
+	@echo "#define PPC_ASM PPC_ASM_ELF"                        >>$@
+	@echo "#define PPC_USE_SPRG 0"                             >>$@
+endef
+
+#  This contains the compiler options necessary to select the CPU model
+#  and (hopefully) optimize for it. 
+#
+CPU_CFLAGS = -mcpu=604
+
+# optimize flag: typically -0, could use -O4 or -fast
+# -O4 is ok for RTEMS
+# NOTE: some level of -O may be actually required by inline assembler
+CFLAGS_OPTIMIZE_V=-O4 -fno-keep-inline-functions
+
+# Define this to yes if this target supports multiprocessor environments.
+HAS_MP=no
+
+
+# The following is a linkcmds file which will work without using the
+# -specs system in gcc 2.8.
+#       $(LD) $(XLDFLAGS) -T $(LINKCMDS) \
+#         -o $@ -u atexit -u __vectors -u download_entry $(LINK_FILES)
+#       $(LD) $(XLDFLAGS) -Ttext 0x20000 \
+#         -o $@ -u atexit -u __vectors -u download_entry $(LINK_FILES)
+
+#       $(CC) -mmvme -mrtems -nostartfiles -mcpu=603 \
+#           -o $(basename $@).exe -L $(PROJECT_RELEASE)/lib \
+#            $(START_FILE) $(LINK_OBJS) \
+#            $(LD_LIBS) \
+#           -Wl,-\( -Wl,-lc -Wl,-lrtemsall -Wl,-lgcc -Wl,-\)
+ifeq ($(RTEMS_USE_GCC272),yes)
+define make-exe
+	$(CC) $(CFLAGS) -o $(basename $@).exe $(LINK_OBJS) $(LINK_LIBS)
+	$(NM) -g -n $@ > $(basename $@).num
+	$(SIZE) $@
+endef
+else
+define make-exe
+	$(CC) $(CFLAGS) -o $(basename $@).exe \
+	    $(LINK_OBJS) $(LINK_LIBS)
+	$(NM) -g -n $@ > $(basename $@).num
+	$(SIZE) $@
+endef
+endif
+
+# Miscellaneous additions go here
+
+# No start file
+START_BASE=