2002-11-13 Jay Monkman <jtm@smoothsmoothie.com>

	* intr_NOTIMES.t: Real version submitted.

2 files changed, 53 insertions, 123 deletions

diff --git a/doc/supplements/arm/ChangeLog b/doc/supplements/arm/ChangeLog
index c1259376a1..4591312bc7 100644
--- a/doc/supplements/arm/ChangeLog
+++ b/doc/supplements/arm/ChangeLog
@@ -1,3 +1,7 @@
+2002-11-13	Jay Monkman <jtm@smoothsmoothie.com>
+
+	* intr_NOTIMES.t: Real version submitted.
+
 2002-10-24	Joel Sherrill <joel@OARcorp.com>
 
 	* stamp-vti, version.texi: Regenerated.
diff --git a/doc/supplements/arm/intr_NOTIMES.t b/doc/supplements/arm/intr_NOTIMES.t
index 4efc1d80b4..f4c61fa448 100644
--- a/doc/supplements/arm/intr_NOTIMES.t
+++ b/doc/supplements/arm/intr_NOTIMES.t
@@ -23,140 +23,74 @@ special control mechanisms to return to the normal processing
 stream.  Although RTEMS hides many of the processor dependent
 details of interrupt processing, it is important to understand
 how the RTEMS interrupt manager is mapped onto the processor's
-unique architecture. Discussed in this chapter are the XXX's
+unique architecture. Discussed in this chapter are the ARM's
 interrupt response and control mechanisms as they pertain to
 RTEMS.
 
-@section Vectoring of an Interrupt Handler
-
-Depending on whether or not the particular CPU
-supports a separate interrupt stack, the XXX family has two
-different interrupt handling models.
-
-@subsection Models Without Separate Interrupt Stacks
+The ARM has 7 exception types:
+@itemize @bullet
 
-Upon receipt of an interrupt the XXX family
-members without separate interrupt stacks automatically perform
-the following actions:
+@item Reset
+@item Undefined instruction
+@item Software interrupt (SWI)
+@item Prefetch Abort
+@item Data Abort
+@item Interrupt (IRQ)
+@item Fast Interrupt (FIQ)
 
-@itemize @bullet
-@item To Be Written
 @end itemize
 
-@subsection Models With Separate Interrupt Stacks
+Of these types, only IRQ and FIQ are handled through RTEMS's interrupt
+vectoring.
 
-Upon receipt of an interrupt the XXX family
-members with separate interrupt stacks automatically perform the
-following actions:
+@section Vectoring of an Interrupt Handler
 
-@itemize @bullet
-@item saves the current status register (SR),
 
-@item clears the master/interrupt (M) bit of the SR to
-indicate the switch from master state to interrupt state,
+Unlike many other architectures, the ARM has seperate stacks for each
+interrupt. When the CPU receives an interrupt, it:
 
-@item sets the privilege mode to supervisor,
+@itemize @bullet
+@item switches to the exception mode corresponding to the interrupt,
 
-@item suppresses tracing,
+@item saves the Current Processor Status Register (CPSR) to the
+exception mode's Saved Processor Status Register (SPSR),
 
-@item sets the interrupt mask level equal to the level of the
-interrupt being serviced,
+@item masks off the IRQ and if the interrupt source was FIQ, the FIQ
+is masked off as well,
 
-@item pushes an interrupt stack frame (ISF), which includes
-the program counter (PC), the status register (SR), and the
-format/exception vector offset (FVO) word, onto the supervisor
-and interrupt stacks,
+@item saves the Program Counter (PC) to the exception mode's Link
+Register (LR - same as R14),
+ 
+@item and sets the PC to the exception's vector address.
 
-@item switches the current stack to the interrupt stack and
-vectors to an interrupt service routine (ISR).  If the ISR was
-installed with the interrupt_catch directive, then the RTEMS
-interrupt handler will begin execution.  The RTEMS interrupt
-handler saves all registers which are not preserved according to
-the calling conventions and invokes the application's ISR.
 @end itemize
 
-A nested interrupt is processed similarly by these
-CPU models with the exception that only a single ISF is placed
-on the interrupt stack and the current stack need not be
-switched.
-
-The FVO word in the Interrupt Stack Frame is examined
-by RTEMS to determine when an outer most interrupt is being
-exited. Since the FVO is used by RTEMS for this purpose, the
-user application code MUST NOT modify this field.
-
-The following shows the Interrupt Stack Frame for
-XXX CPU models with separate interrupt stacks:
-
-@ifset use-ascii
-@example
-@group
-               +----------------------+
-               |    Status Register   | 0x0
-               +----------------------+    
-               | Program Counter High | 0x2
-               +----------------------+    
-               | Program Counter Low  | 0x4
-               +----------------------+    
-               | Format/Vector Offset | 0x6
-               +----------------------+    
-@end group
-@end example
-@end ifset
-
-@ifset use-tex
-@sp 1
-@tex
-\centerline{\vbox{\offinterlineskip\halign{
-\strut\vrule#&
-\hbox to 2.00in{\enskip\hfil#\hfil}&
-\vrule#&
-\hbox to 0.50in{\enskip\hfil#\hfil}
-\cr
-\multispan{3}\hrulefill\cr
-& Status Register && 0x0\cr
-\multispan{3}\hrulefill\cr
-& Program Counter High && 0x2\cr
-\multispan{3}\hrulefill\cr
-& Program Counter Low && 0x4\cr
-\multispan{3}\hrulefill\cr
-& Format/Vector Offset && 0x6\cr
-\multispan{3}\hrulefill\cr
-}}\hfil}
-@end tex
-@end ifset
-
-@ifset use-html
-@html
-<CENTER>
-  <TABLE COLS=2 WIDTH="40%" BORDER=2>
-<TR><TD ALIGN=center><STRONG>Status Register</STRONG></TD>
-    <TD ALIGN=center>0x0</TD></TR>
-<TR><TD ALIGN=center><STRONG>Program Counter High</STRONG></TD>
-    <TD ALIGN=center>0x2</TD></TR>
-<TR><TD ALIGN=center><STRONG>Program Counter Low</STRONG></TD>
-    <TD ALIGN=center>0x4</TD></TR>
-<TR><TD ALIGN=center><STRONG>Format/Vector Offset</STRONG></TD>
-    <TD ALIGN=center>0x6</TD></TR>
-  </TABLE>
-</CENTER>
-@end html
-@end ifset
+The vectors for both IRQ and FIQ point to the _ISR_Handler function. 
+_ISR_Handler() calls the BSP specific handler, ExecuteITHandler(). Before
+calling ExecuteITHandler(), registers R0-R3, R12, and R14(LR) are saved so 
+that it is safe to call C functions. Even ExecuteITHandler() can be written
+in C.
 
 @section Interrupt Levels
 
-Eight levels (0-7) of interrupt priorities are
-supported by XXX family members with level seven (7) being
-the highest priority.  Level zero (0) indicates that interrupts
-are fully enabled.  Interrupt requests for interrupts with
-priorities less than or equal to the current interrupt mask
-level are ignored.
+The ARM architecture supports two external interrupts - IRQ and FIQ. FIQ 
+has a higher priority than IRQ, and has its own version of register R8 - R14,
+however RTEMS does not take advantage of them. Both interrupts are enabled
+through the CPSR.
+
+The RTEMS interrupt level mapping scheme for the AEM is not a numeric level
+as on most RTEMS ports. It is a bit mapping that corresponds the enable 
+bits's postions in the CPSR:
 
-Although RTEMS supports 256 interrupt levels, the
-XXX family only supports eight.  RTEMS interrupt levels 0
-through 7 directly correspond to XXX interrupt levels.  All
-other RTEMS interrupt levels are undefined and their behavior is
-unpredictable.
+@table @b
+@item FIQ
+Setting bit 6 (0 is least significant bit) disables the FIQ.
+
+@item IRQ
+Setting bit 7 (0 is least significant bit) disables the IRQ.
+ 
+@end table
+ 
 
 @section Disabling of Interrupts by RTEMS
 
@@ -183,14 +117,6 @@ execute as non-maskable interrupts.
 
 @section Interrupt Stack
 
-RTEMS allocates the interrupt stack from the
-Workspace Area.  The amount of memory allocated for the
-interrupt stack is determined by the interrupt_stack_size field
-in the CPU Configuration Table.  During the initialization
-process, RTEMS will install its interrupt stack.
-
-The XXX port of RTEMS supports a software managed
-dedicated interrupt stack on those CPU models which do not
-support a separate interrupt stack in hardware.
-
+RTEMS expects the interrupt stacks to be set up in bsp_start(). The memory
+for the stacks is reserved in the linker script.