diff options
| author | Joel Sherrill <joel.sherrill@OARcorp.com> | 2000-06-01 15:29:01 +0000 |
|---|---|---|
| committer | Joel Sherrill <joel.sherrill@OARcorp.com> | 2000-06-01 15:29:01 +0000 |
| commit | fc76a6aa19af9606f260993811ac0dee8ec4e886 (patch) | |
| tree | 039d079cce65ec28746118f177fc9bea2e737b11 /doc/supplements | |
| parent | Patch from Ralf Corsepius <corsepiu@faw.uni-ulm.de>: (diff) | |
| download | rtems-fc76a6aa19af9606f260993811ac0dee8ec4e886.tar.bz2 | |
Patch rtemsdoc-4.5.0-rc-8.diff from Ralf Corsepius <corsepiu@faw.uni-ulm.de>.
Ralf's comments follow:
Changes:
* Enhanced versioning:
- Addition of automake's version.texi support
- Replacement of rtemsdoc's former versioning support by automake's
versioning support (Abandoning RTEMS-UPDATE-* etc.)
- Abandoning setup.texi.in
- Add EDITION to each documents Makefile.am
- version.texi support in project.am
- Addition of maintainer mode (currently only used to prevent incorrectly
updating timestamps when users touch automake's version.texi timestamp
files (stamp-vti)).
* Fixing info dir support
- Use texinfo's @dircategory and @direntry instead of infos *-DIR-ENTRY
- $(infodir)/dir is now correctly set up
* Avoid using temporary files
- Pipe texts through REPLACE2 into BMENU2 instead of using temporary files.
- Abandon using bmenu in favor of bmenu2 (bmenu could be removed now)
* Prepare Makefile.ams for building in a separate buildtree
- prefix files with $(srcdir) in Makefile.am for files which must be
generated inside of the source tree
Notes:
* rtemsdoc can not yet be build in a separate source-tree, but we
are very close to it.
* You as the maintainer of this package now should always use
--enable-maintainer-mode to configure rtemsdoc.
Diffstat (limited to '')
45 files changed, 512 insertions, 539 deletions
diff --git a/doc/supplements/hppa1_1/.cvsignore b/doc/supplements/hppa1_1/.cvsignore index c6cf96cfd9..ab904589eb 100644 --- a/doc/supplements/hppa1_1/.cvsignore +++ b/doc/supplements/hppa1_1/.cvsignore @@ -6,9 +6,9 @@ cpumodel.texi cputable.texi fatalerr.texi hppa1_1 +hppa1_1*.html hppa1_1-? hppa1_1-?? -hppa1_1*.html hppa1_1.aux hppa1_1.cp hppa1_1.dvi @@ -24,6 +24,7 @@ hppa1_1.vr index.html intr.t intr.texi +mdate-sh memmodel.texi timeSIMHPPA.texi timing.t diff --git a/doc/supplements/hppa1_1/Makefile.am b/doc/supplements/hppa1_1/Makefile.am index a493571234..a8f34ddd75 100644 --- a/doc/supplements/hppa1_1/Makefile.am +++ b/doc/supplements/hppa1_1/Makefile.am @@ -6,20 +6,21 @@ # $Id$ # -AUTOMAKE_OPTIONS = foreign +AUTOMAKE_OPTIONS = foreign 1.4 -PROJECT=hppa1_1 +PROJECT = hppa1_1 +EDITION = 1 include $(top_srcdir)/project.am include $(top_srcdir)/supplements/supplement.am -COMMON_FILES=$(top_srcdir)/common/cpright.texi $(top_builddir)/common/setup.texi +GENERATED_FILES = cpumodel.texi callconv.texi memmodel.texi intr.texi \ + fatalerr.texi bsp.texi cputable.texi wksheets.texi timing.texi \ + timeSIMHPPA.texi -GENERATED_FILES=\ - cpumodel.texi callconv.texi memmodel.texi intr.texi fatalerr.texi \ - bsp.texi cputable.texi wksheets.texi timing.texi timeSIMHPPA.texi +COMMON_FILES = $(top_srcdir)/common/setup.texi $(top_srcdir)/common/cpright.texi -FILES= preface.texi +FILES = preface.texi info_TEXINFOS = hppa1_1.texi hppa1_1_TEXINFOS = $(FILES) $(COMMON_FILES) $(GENERATED_FILES) @@ -28,65 +29,62 @@ hppa1_1_TEXINFOS = $(FILES) $(COMMON_FILES) $(GENERATED_FILES) # Chapters which get automatic processing # -cpumodel.texi: cpumodel.t - $(BMENU) -p "Preface" \ +$(srcdir)/cpumodel.texi: cpumodel.t + $(BMENU2) -p "Preface" \ -u "Top" \ - -n "Calling Conventions" $< + -n "Calling Conventions" < $< > $@ -callconv.texi: callconv.t - $(BMENU) -p "CPU Model Dependent Features CPU Model Name" \ +$(srcdir)/callconv.texi: callconv.t + $(BMENU2) -p "CPU Model Dependent Features CPU Model Name" \ -u "Top" \ - -n "Memory Model" $< + -n "Memory Model" < $< > $@ -memmodel.texi: memmodel.t - $(BMENU) -p "Calling Conventions User-Provided Routines" \ +$(srcdir)/memmodel.texi: memmodel.t + $(BMENU2) -p "Calling Conventions User-Provided Routines" \ -u "Top" \ - -n "Interrupt Processing" $< + -n "Interrupt Processing" < $< > $@ # Interrupt Chapter: # 1. Replace Times and Sizes # 2. Build Node Structure -intr.texi: intr_NOTIMES.t SIMHPPA_TIMES - ${REPLACE2} -p $(srcdir)/SIMHPPA_TIMES $(srcdir)/intr_NOTIMES.t intr.t - $(BMENU) -p "Memory Model Flat Memory Model" \ +$(srcdir)/intr.texi: intr_NOTIMES.t SIMHPPA_TIMES + ${REPLACE2} -p $(srcdir)/SIMHPPA_TIMES $(srcdir)/intr_NOTIMES.t | \ + $(BMENU2) -p "Memory Model Flat Memory Model" \ -u "Top" \ - -n "Default Fatal Error Processing" intr.t -CLEANFILES += intr.t + -n "Default Fatal Error Processing" > $@ -fatalerr.texi: fatalerr.t - $(BMENU) -p "Interrupt Processing Disabling of Interrupts by RTEMS" \ +$(srcdir)/fatalerr.texi: fatalerr.t + $(BMENU2) -p "Interrupt Processing Disabling of Interrupts by RTEMS" \ -u "Top" \ - -n "Board Support Packages" $< + -n "Board Support Packages" < $< > $@ -bsp.texi: bsp.t - $(BMENU) -p "Default Fatal Error Processing Default Fatal Error Handler Operations" \ +$(srcdir)/bsp.texi: bsp.t + $(BMENU2) -p "Default Fatal Error Processing Default Fatal Error Handler Operations" \ -u "Top" \ - -n "Processor Dependent Information Table" $< + -n "Processor Dependent Information Table" < $< > $@ -cputable.texi: cputable.t - $(BMENU) -p "Board Support Packages Processor Initialization" \ +$(srcdir)/cputable.texi: cputable.t + $(BMENU2) -p "Board Support Packages Processor Initialization" \ -u "Top" \ - -n "Memory Requirements" $< + -n "Memory Requirements" < $< > $@ # Worksheets Chapter: # 1. Obtain the Shared File # 2. Replace Times and Sizes # 3. Build Node Structure -wksheets.texi: $(top_srcdir)/common/wksheets.t SIMHPPA_TIMES +$(srcdir)/wksheets.texi: $(top_srcdir)/common/wksheets.t SIMHPPA_TIMES ${REPLACE2} -p $(srcdir)/SIMHPPA_TIMES \ - $(top_srcdir)/common/wksheets.t wksheets.t - $(BMENU) -p "Processor Dependent Information Table CPU Dependent Information Table" \ + $(top_srcdir)/common/wksheets.t | \ + $(BMENU2) -p "Processor Dependent Information Table CPU Dependent Information Table" \ -u "Top" \ - -n "Timing Specification" wksheets.t -CLEANFILES += wksheets.t - + -n "Timing Specification" > $@ # Timing Specification Chapter: # 1. Copy the Shared File # 3. Build Node Structure -timing.texi: $(top_srcdir)/common/timing.t +$(srcdir)/timing.texi: $(top_srcdir)/common/timing.t $(BMENU2) -p "Memory Requirements RTEMS RAM Workspace Worksheet" \ -u "Top" \ -n "HP-7100 Timing Data" < $< > $@ @@ -96,9 +94,9 @@ timing.texi: $(top_srcdir)/common/timing.t # 2. Replace Times and Sizes # 3. Build Node Structure -timeSIMHPPA.texi: timeSIMHPPA.t - $(BMENU) -p "Timing Specification Terminology" \ +$(srcdir)/timeSIMHPPA.texi: timeSIMHPPA.t + $(BMENU2) -p "Timing Specification Terminology" \ -u "Top" \ - -n "Command and Variable Index" $< + -n "Command and Variable Index" < $< > $@ EXTRA_DIST = SIMHPPA_TIMES *.t diff --git a/doc/supplements/hppa1_1/hppa1_1.texi b/doc/supplements/hppa1_1/hppa1_1.texi index d3417013d6..e013320c00 100644 --- a/doc/supplements/hppa1_1/hppa1_1.texi +++ b/doc/supplements/hppa1_1/hppa1_1.texi @@ -19,27 +19,20 @@ @c Master file for the Hewlett Packard PA-RISC Applications Supplement @c +@include version.texi @include ../../common/setup.texi -@ignore -@ifinfo -@format -START-INFO-DIR-ENTRY -* RTEMS Hewlett Packard PA-RISC Applications Supplement (hppa1_1): -END-INFO-DIR-ENTRY -@end format -@end ifinfo -@end ignore +@ifset use-ascii +@dircategory RTEMS Target Supplements +@direntry +* RTEMS Hewlett Packard PA-RISC Applications Supplement: (hppa1_1). +@end direntry +@end ifset @c @c Title Page Stuff @c -@set edition @value{RTEMS-EDITION} -@set version @value{RTEMS-VERSION} -@set update-date @value{RTEMS-UPDATE-DATE} -@set update-month @value{RTEMS-UPDATE-MONTH} - @c @c I don't really like having a short title page. --joel @c @@ -51,9 +44,9 @@ END-INFO-DIR-ENTRY @finalout @title RTEMS Hewlett Packard PA-RISC Applications Supplement -@subtitle Edition @value{edition}, for RTEMS @value{version} +@subtitle Edition @value{EDITION}, for RTEMS @value{VERSION} @sp 1 -@subtitle @value{update-month} +@subtitle @value{UPDATED} @author On-Line Applications Research Corporation @page @include ../../common/cpright.texi diff --git a/doc/supplements/hppa1_1/stamp-vti b/doc/supplements/hppa1_1/stamp-vti new file mode 100644 index 0000000000..27e5ccd0cb --- /dev/null +++ b/doc/supplements/hppa1_1/stamp-vti @@ -0,0 +1,3 @@ +@set UPDATED 1 June 2000 +@set EDITION 1 +@set VERSION 4.5.0-beta3 diff --git a/doc/supplements/hppa1_1/version.texi b/doc/supplements/hppa1_1/version.texi new file mode 100644 index 0000000000..27e5ccd0cb --- /dev/null +++ b/doc/supplements/hppa1_1/version.texi @@ -0,0 +1,3 @@ +@set UPDATED 1 June 2000 +@set EDITION 1 +@set VERSION 4.5.0-beta3 diff --git a/doc/supplements/i386/.cvsignore b/doc/supplements/i386/.cvsignore index 420713dc15..9e2e0ddcda 100644 --- a/doc/supplements/i386/.cvsignore +++ b/doc/supplements/i386/.cvsignore @@ -24,6 +24,7 @@ i386.vr index.html intr.t intr.texi +mdate-sh memmodel.texi timeFORCE386.texi timeFORCE386_.t diff --git a/doc/supplements/i386/Makefile.am b/doc/supplements/i386/Makefile.am index f3f16baac4..60f24391cc 100644 --- a/doc/supplements/i386/Makefile.am +++ b/doc/supplements/i386/Makefile.am @@ -6,86 +6,85 @@ # $Id$ # -AUTOMAKE_OPTIONS = foreign +AUTOMAKE_OPTIONS = foreign 1.4 -PROJECT=i386 +PROJECT = i386 +EDITION = 1 include $(top_srcdir)/project.am include $(top_srcdir)/supplements/supplement.am -COMMON_FILES=$(top_srcdir)/common/cpright.texi $(top_builddir)/common/setup.texi +GENERATED_FILES = cpumodel.texi callconv.texi memmodel.texi intr.texi \ + fatalerr.texi bsp.texi cputable.texi timing.texi wksheets.texi \ + timeFORCE386.texi -GENERATED_FILES=\ - cpumodel.texi callconv.texi memmodel.texi intr.texi fatalerr.texi \ - bsp.texi cputable.texi timing.texi wksheets.texi timeFORCE386.texi +COMMON_FILES = $(top_srcdir)/common/setup.texi $(top_srcdir)/common/cpright.texi -FILES= preface.texi +FILES = preface.texi info_TEXINFOS = i386.texi -i386_TEXINFOS = $(FILES) $(COMMON_FILES) $(GENERATED_FILES) +i386_TEXINFOS = $(FILES) $(COMMON_FILES) $(GENERATED_FILES) # # Chapters which get automatic processing # -cpumodel.texi: cpumodel.t - $(BMENU) -p "Preface" \ +$(srcdir)/cpumodel.texi: cpumodel.t + $(BMENU2) -p "Preface" \ -u "Top" \ - -n "Calling Conventions" $< + -n "Calling Conventions" < $< > $@ -callconv.texi: callconv.t - $(BMENU) -p "CPU Model Dependent Features Floating Point Unit" \ +$(srcdir)/callconv.texi: callconv.t + $(BMENU2) -p "CPU Model Dependent Features Floating Point Unit" \ -u "Top" \ - -n "Memory Model" $< + -n "Memory Model" < $< > $@ -memmodel.texi: memmodel.t - $(BMENU) -p "Calling Conventions User-Provided Routines" \ +$(srcdir)/memmodel.texi: memmodel.t + $(BMENU2) -p "Calling Conventions User-Provided Routines" \ -u "Top" \ - -n "Interrupt Processing" $< + -n "Interrupt Processing" < $< > $@ # Interrupt Chapter: # 1. Replace Times and Sizes # 2. Build Node Structure -intr.texi: intr_NOTIMES.t FORCE386_TIMES - ${REPLACE2} -p $(srcdir)/FORCE386_TIMES $(srcdir)/intr_NOTIMES.t intr.t - $(BMENU) -p "Memory Model Flat Memory Model" \ +$(srcdir)/intr.texi: intr_NOTIMES.t FORCE386_TIMES + ${REPLACE2} -p $(srcdir)/FORCE386_TIMES $(srcdir)/intr_NOTIMES.t | \ + $(BMENU2) -p "Memory Model Flat Memory Model" \ -u "Top" \ - -n "Default Fatal Error Processing" intr.t -CLEANFILES += intr.t + -n "Default Fatal Error Processing" > $@ -fatalerr.texi: fatalerr.t - $(BMENU) -p "Interrupt Processing Interrupt Stack" \ +$(srcdir)/fatalerr.texi: fatalerr.t + $(BMENU2) -p "Interrupt Processing Interrupt Stack" \ -u "Top" \ - -n "Board Support Packages" $< + -n "Board Support Packages" < $< > $@ -bsp.texi: bsp.t - $(BMENU) -p "Default Fatal Error Processing Default Fatal Error Handler Operations" \ +$(srcdir)/bsp.texi: bsp.t + $(BMENU2) -p "Default Fatal Error Processing Default Fatal Error Handler Operations" \ -u "Top" \ - -n "Processor Dependent Information Table" $< + -n "Processor Dependent Information Table" < $< > $@ -cputable.texi: cputable.t - $(BMENU) -p "Board Support Packages Processor Initialization" \ +$(srcdir)/cputable.texi: cputable.t + $(BMENU2) -p "Board Support Packages Processor Initialization" \ -u "Top" \ - -n "Memory Requirements" $< + -n "Memory Requirements" < $< > $@ # Worksheets Chapter: # 1. Obtain the Shared File # 2. Replace Times and Sizes # 3. Build Node Structure -wksheets.texi: $(top_srcdir)/common/wksheets.t FORCE386_TIMES +$(srcdir)/wksheets.texi: $(top_srcdir)/common/wksheets.t FORCE386_TIMES ${REPLACE2} -p $(srcdir)/FORCE386_TIMES \ - $(top_srcdir)/common/wksheets.t wksheets.t - $(BMENU) -p "Processor Dependent Information Table CPU Dependent Information Table" \ + $(top_srcdir)/common/wksheets.t | \ + $(BMENU2) -p "Processor Dependent Information Table CPU Dependent Information Table" \ -u "Top" \ - -n "Timing Specification" wksheets.t -CLEANFILES += wksheets.t + -n "Timing Specification" > $@ # Timing Specification Chapter: # 1. Copy the Shared File # 3. Build Node Structure -timing.texi: $(top_srcdir)/common/timing.t +$(srcdir)/timing.texi: $(top_srcdir)/common/timing.t $(BMENU2) -p "Memory Requirements RTEMS RAM Workspace Worksheet" \ -u "Top" \ -n "CPU386 Timing Data" < $< > $@ @@ -95,17 +94,16 @@ timing.texi: $(top_srcdir)/common/timing.t # 2. Replace Times and Sizes # 3. Build Node Structure -timeFORCE386.texi: $(top_srcdir)/common/timetbl.t timeFORCE386.t +$(srcdir)/timeFORCE386.texi: $(top_srcdir)/common/timetbl.t timeFORCE386.t cat timeFORCE386.t $(top_srcdir)/common/timetbl.t >timeFORCE386_.t @echo >>timeFORCE386_.t @echo "@tex" >>timeFORCE386_.t @echo "\\global\\advance \\smallskipamount by 4pt" >>timeFORCE386_.t @echo "@end tex" >>timeFORCE386_.t - ${REPLACE2} -p FORCE386_TIMES timeFORCE386_.t timeFORCE386_.t - $(BMENU) -p "Timing Specification Terminology" \ + ${REPLACE2} -p FORCE386_TIMES timeFORCE386_.t | \ + $(BMENU2) -p "Timing Specification Terminology" \ -u "Top" \ - -n "Command and Variable Index" timeFORCE386_.t - mv timeFORCE386_.texi timeFORCE386.texi -CLEANFILES += timeFORCE386_.t timeFORCE386_.texi + -n "Command and Variable Index" > $@ +CLEANFILES += timeFORCE386_.t EXTRA_DIST = FORCE386_TIMES *.t diff --git a/doc/supplements/i386/i386.texi b/doc/supplements/i386/i386.texi index d319167587..9e83acda86 100644 --- a/doc/supplements/i386/i386.texi +++ b/doc/supplements/i386/i386.texi @@ -19,27 +19,20 @@ @c Master file for the Intel i386 Applications Supplement @c +@include version.texi @include ../../common/setup.texi -@ignore -@ifinfo -@format -START-INFO-DIR-ENTRY -* RTEMS Intel i386 Applications Supplement (i386): -END-INFO-DIR-ENTRY -@end format -@end ifinfo -@end ignore +@ifset use-ascii +@dircategory RTEMS Target Supplements +@direntry +* RTEMS Intel i386 Applications Supplement: (i386). +@end direntry +@end ifset @c @c Title Page Stuff @c -@set edition @value{RTEMS-EDITION} -@set version @value{RTEMS-VERSION} -@set update-date @value{RTEMS-UPDATE-DATE} -@set update-month @value{RTEMS-UPDATE-MONTH} - @c @c I don't really like having a short title page. --joel @c @@ -51,9 +44,9 @@ END-INFO-DIR-ENTRY @finalout @title RTEMS Intel i386 Applications Supplement -@subtitle Edition @value{edition}, for RTEMS @value{version} +@subtitle Edition @value{EDITION}, for RTEMS @value{VERSION} @sp 1 -@subtitle @value{update-month} +@subtitle @value{UPDATED} @author On-Line Applications Research Corporation @page @include ../../common/cpright.texi diff --git a/doc/supplements/i386/stamp-vti b/doc/supplements/i386/stamp-vti new file mode 100644 index 0000000000..27e5ccd0cb --- /dev/null +++ b/doc/supplements/i386/stamp-vti @@ -0,0 +1,3 @@ +@set UPDATED 1 June 2000 +@set EDITION 1 +@set VERSION 4.5.0-beta3 diff --git a/doc/supplements/i386/version.texi b/doc/supplements/i386/version.texi new file mode 100644 index 0000000000..27e5ccd0cb --- /dev/null +++ b/doc/supplements/i386/version.texi @@ -0,0 +1,3 @@ +@set UPDATED 1 June 2000 +@set EDITION 1 +@set VERSION 4.5.0-beta3 diff --git a/doc/supplements/i960/.cvsignore b/doc/supplements/i960/.cvsignore index 89a693dbf0..fb6030e639 100644 --- a/doc/supplements/i960/.cvsignore +++ b/doc/supplements/i960/.cvsignore @@ -22,6 +22,7 @@ i960.vr index.html intr.t intr.texi +mdate-sh memmodel.texi timeCVME961.texi timeCVME961_.t diff --git a/doc/supplements/i960/Makefile.am b/doc/supplements/i960/Makefile.am index e0ecf513fa..43ab3e6c30 100644 --- a/doc/supplements/i960/Makefile.am +++ b/doc/supplements/i960/Makefile.am @@ -6,20 +6,20 @@ # $Id$ # -AUTOMAKE_OPTIONS = foreign +AUTOMAKE_OPTIONS = foreign 1.4 -PROJECT=i960 +PROJECT = i960 +EDITION = 1 include $(top_srcdir)/project.am include $(top_srcdir)/supplements/supplement.am -COMMON_FILES=$(top_srcdir)/common/cpright.texi $(top_builddir)/common/setup.texi +GENERATED_FILES = cpumodel.texi callconv.texi memmodel.texi intr.texi \ + fatalerr.texi bsp.texi cputable.texi timing.texi wksheets.texi \ + timeCVME961.texi +COMMON_FILES = $(top_srcdir)/common/setup.texi $(top_srcdir)/common/cpright.texi -GENERATED_FILES=\ - cpumodel.texi callconv.texi memmodel.texi intr.texi fatalerr.texi \ - bsp.texi cputable.texi timing.texi wksheets.texi timeCVME961.texi - -FILES= preface.texi +FILES = preface.texi info_TEXINFOS = i960.texi i960_TEXINFOS = $(FILES) $(COMMON_FILES) $(GENERATED_FILES) @@ -28,65 +28,62 @@ i960_TEXINFOS = $(FILES) $(COMMON_FILES) $(GENERATED_FILES) # Chapters which get automatic processing # -cpumodel.texi: cpumodel.t - $(BMENU) -p "Preface" \ +$(srcdir)/cpumodel.texi: cpumodel.t + $(BMENU2) -p "Preface" \ -u "Top" \ - -n "Calling Conventions" $< + -n "Calling Conventions" < $< > $@ -callconv.texi: callconv.t - $(BMENU) -p "CPU Model Dependent Features Floating Point Unit" \ +$(srcdir)/callconv.texi: callconv.t + $(BMENU2) -p "CPU Model Dependent Features Floating Point Unit" \ -u "Top" \ - -n "Memory Model" $< + -n "Memory Model" < $< > $@ -memmodel.texi: memmodel.t - $(BMENU) -p "Calling Conventions Leaf Procedures" \ +$(srcdir)/memmodel.texi: memmodel.t + $(BMENU2) -p "Calling Conventions Leaf Procedures" \ -u "Top" \ - -n "Interrupt Processing" $< + -n "Interrupt Processing" < $< > $@ # Interrupt Chapter: # 1. Replace Times and Sizes # 2. Build Node Structure -intr.texi: intr_NOTIMES.t CVME961_TIMES - ${REPLACE2} -p $(srcdir)/CVME961_TIMES $(srcdir)/intr_NOTIMES.t intr.t - $(BMENU) -p "Memory Model Flat Memory Model" \ +$(srcdir)/intr.texi: intr_NOTIMES.t CVME961_TIMES + ${REPLACE2} -p $(srcdir)/CVME961_TIMES $(srcdir)/intr_NOTIMES.t | \ + $(BMENU2) -p "Memory Model Flat Memory Model" \ -u "Top" \ - -n "Default Fatal Error Processing" intr.t -CLEANFILES += intr.t + -n "Default Fatal Error Processing" > $@ -fatalerr.texi: fatalerr.t - $(BMENU) -p "Interrupt Processing Interrupt Stack" \ +$(srcdir)/fatalerr.texi: fatalerr.t + $(BMENU2) -p "Interrupt Processing Interrupt Stack" \ -u "Top" \ - -n "Board Support Packages" $< + -n "Board Support Packages" < $< > $@ -bsp.texi: bsp.t - $(BMENU) -p "Default Fatal Error Processing Default Fatal Error Handler Operations" \ +$(srcdir)/bsp.texi: bsp.t + $(BMENU2) -p "Default Fatal Error Processing Default Fatal Error Handler Operations" \ -u "Top" \ - -n "Processor Dependent Information Table" $< + -n "Processor Dependent Information Table" < $< > $@ -cputable.texi: cputable.t - $(BMENU) -p "Board Support Packages Processor Initialization" \ +$(srcdir)/cputable.texi: cputable.t + $(BMENU2) -p "Board Support Packages Processor Initialization" \ -u "Top" \ - -n "Memory Requirements" $< - + -n "Memory Requirements" < $< > $@ # Worksheets Chapter: # 1. Obtain the Shared File # 2. Replace Times and Sizes # 3. Build Node Structure -wksheets.texi: $(top_srcdir)/common/wksheets.t CVME961_TIMES +$(srcdir)/wksheets.texi: $(top_srcdir)/common/wksheets.t CVME961_TIMES ${REPLACE2} -p $(srcdir)/CVME961_TIMES \ - $(top_srcdir)/common/wksheets.t wksheets.t - $(BMENU) -p "Processor Dependent Information Table CPU Dependent Information Table" \ + $(top_srcdir)/common/wksheets.t | \ + $(BMENU2) -p "Processor Dependent Information Table CPU Dependent Information Table" \ -u "Top" \ - -n "Timing Specification" wksheets.t -CLEANFILES += wksheets.t + -n "Timing Specification" > $@ # Timing Specification Chapter: # 1. Copy the Shared File # 3. Build Node Structure -timing.texi: $(top_srcdir)/common/timing.t +$(srcdir)/timing.texi: $(top_srcdir)/common/timing.t $(BMENU2) -p "Memory Requirements RTEMS RAM Workspace Worksheet" \ -u "Top" \ -n "CVME961 Timing Data" < $< > $@ @@ -96,17 +93,16 @@ timing.texi: $(top_srcdir)/common/timing.t # 2. Replace Times and Sizes # 3. Build Node Structure -timeCVME961.texi: $(top_srcdir)/common/timetbl.t timeCVME961.t +$(srcdir)/timeCVME961.texi: $(top_srcdir)/common/timetbl.t timeCVME961.t cat timeCVME961.t $(top_srcdir)/common/timetbl.t >timeCVME961_.t @echo >>timeCVME961_.t @echo "@tex" >>timeCVME961_.t @echo "\\global\\advance \\smallskipamount by 4pt" >>timeCVME961_.t @echo "@end tex" >>timeCVME961_.t - ${REPLACE2} -p CVME961_TIMES timeCVME961_.t timeCVME961_.t - $(BMENU) -p "Timing Specification Terminology" \ + ${REPLACE2} -p CVME961_TIMES timeCVME961_.t | \ + $(BMENU2) -p "Timing Specification Terminology" \ -u "Top" \ - -n "Command and Variable Index" timeCVME961_.t - mv timeCVME961_.texi timeCVME961.texi -CLEANFILES += timeCVME961_.t timeCVME961_.texi + -n "Command and Variable Index" > $@ +CLEANFILES += timeCVME961_.t EXTRA_DIST = CVME961_TIMES *.t diff --git a/doc/supplements/i960/i960.texi b/doc/supplements/i960/i960.texi index ccfc372a7b..93dc23d060 100644 --- a/doc/supplements/i960/i960.texi +++ b/doc/supplements/i960/i960.texi @@ -19,27 +19,20 @@ @c Master file for the Intel i960 Applications Supplement @c +@include version.texi @include ../../common/setup.texi -@ignore -@ifinfo -@format -START-INFO-DIR-ENTRY -* RTEMS Intel i960 Applications Supplement (i960): -END-INFO-DIR-ENTRY -@end format -@end ifinfo -@end ignore +@ifset use-ascii +@dircategory RTEMS Target Supplements +@direntry +* RTEMS Intel i960 Applications Supplement: (i960). +@end direntry +@end ifset @c @c Title Page Stuff @c -@set edition @value{RTEMS-EDITION} -@set version @value{RTEMS-VERSION} -@set update-date @value{RTEMS-UPDATE-DATE} -@set update-month @value{RTEMS-UPDATE-MONTH} - @c @c I don't really like having a short title page. --joel @c @@ -51,9 +44,9 @@ END-INFO-DIR-ENTRY @finalout @title RTEMS Intel i960 Applications Supplement -@subtitle Edition @value{edition}, for RTEMS @value{version} +@subtitle Edition @value{EDITION}, for RTEMS @value{VERSION} @sp 1 -@subtitle @value{update-month} +@subtitle @value{UPDATED} @author On-Line Applications Research Corporation @page @include ../../common/cpright.texi diff --git a/doc/supplements/i960/stamp-vti b/doc/supplements/i960/stamp-vti new file mode 100644 index 0000000000..27e5ccd0cb --- /dev/null +++ b/doc/supplements/i960/stamp-vti @@ -0,0 +1,3 @@ +@set UPDATED 1 June 2000 +@set EDITION 1 +@set VERSION 4.5.0-beta3 diff --git a/doc/supplements/i960/version.texi b/doc/supplements/i960/version.texi new file mode 100644 index 0000000000..27e5ccd0cb --- /dev/null +++ b/doc/supplements/i960/version.texi @@ -0,0 +1,3 @@ +@set UPDATED 1 June 2000 +@set EDITION 1 +@set VERSION 4.5.0-beta3 diff --git a/doc/supplements/m68k/.cvsignore b/doc/supplements/m68k/.cvsignore index 58ae87a3bb..647e292cc2 100644 --- a/doc/supplements/m68k/.cvsignore +++ b/doc/supplements/m68k/.cvsignore @@ -24,6 +24,7 @@ m68k.ps m68k.toc m68k.tp m68k.vr +mdate-sh memmodel.texi timeMVME136.texi timeMVME136_.t diff --git a/doc/supplements/m68k/Makefile.am b/doc/supplements/m68k/Makefile.am index dc7d8d072c..51fbd2c884 100644 --- a/doc/supplements/m68k/Makefile.am +++ b/doc/supplements/m68k/Makefile.am @@ -6,20 +6,21 @@ # $Id$ # -AUTOMAKE_OPTIONS = foreign +AUTOMAKE_OPTIONS = foreign 1.4 -PROJECT=m68k +PROJECT = m68k +EDITION = 1 include $(top_srcdir)/project.am include $(top_srcdir)/supplements/supplement.am -COMMON_FILES=$(top_srcdir)/common/cpright.texi $(top_builddir)/common/setup.texi +GENERATED_FILES = cpumodel.texi callconv.texi memmodel.texi intr.texi \ + fatalerr.texi bsp.texi cputable.texi timing.texi wksheets.texi \ + timeMVME136.texi -GENERATED_FILES=\ - cpumodel.texi callconv.texi memmodel.texi intr.texi fatalerr.texi \ - bsp.texi cputable.texi timing.texi wksheets.texi timeMVME136.texi +COMMON_FILES = $(top_srcdir)/common/setup.texi $(top_srcdir)/common/cpright.texi -FILES= preface.texi +FILES = preface.texi info_TEXINFOS = m68k.texi m68k_TEXINFOS = $(FILES) $(COMMON_FILES) $(GENERATED_FILES) @@ -28,65 +29,62 @@ m68k_TEXINFOS = $(FILES) $(COMMON_FILES) $(GENERATED_FILES) # Chapters which get automatic processing # -cpumodel.texi: cpumodel.t - $(BMENU) -p "Preface" \ +$(srcdir)/cpumodel.texi: cpumodel.t + $(BMENU2) -p "Preface" \ -u "Top" \ - -n "Calling Conventions" ${*}.t + -n "Calling Conventions" < $< > $@ -callconv.texi: callconv.t - $(BMENU) -p "CPU Model Dependent Features Extend Byte to Long Instruction" \ +$(srcdir)/callconv.texi: callconv.t + $(BMENU2) -p "CPU Model Dependent Features Extend Byte to Long Instruction" \ -u "Top" \ - -n "Memory Model" $< + -n "Memory Model" < $< > $@ -memmodel.texi: memmodel.t - $(BMENU) -p "Calling Conventions User-Provided Routines" \ +$(srcdir)/memmodel.texi: memmodel.t + $(BMENU2) -p "Calling Conventions User-Provided Routines" \ -u "Top" \ - -n "Interrupt Processing" $< + -n "Interrupt Processing" < $< > $@ # Interrupt Chapter: # 1. Replace Times and Sizes # 2. Build Node Structure -intr.texi: intr_NOTIMES.t MVME136_TIMES - ${REPLACE2} -p $(srcdir)/MVME136_TIMES $(srcdir)/intr_NOTIMES.t intr.t - $(BMENU) -p "Memory Model Flat Memory Model" \ +$(srcdir)/intr.texi: intr_NOTIMES.t MVME136_TIMES + ${REPLACE2} -p $(srcdir)/MVME136_TIMES $(srcdir)/intr_NOTIMES.t | \ + $(BMENU2) -p "Memory Model Flat Memory Model" \ -u "Top" \ - -n "Default Fatal Error Processing" intr.t -CLEANFILES += intr.t + -n "Default Fatal Error Processing" > $@ -fatalerr.texi: fatalerr.t - $(BMENU) -p "Interrupt Processing Interrupt Stack" \ +$(srcdir)/fatalerr.texi: fatalerr.t + $(BMENU2) -p "Interrupt Processing Interrupt Stack" \ -u "Top" \ - -n "Board Support Packages" $< + -n "Board Support Packages" < $< > $@ -bsp.texi: bsp.t - $(BMENU) -p "Default Fatal Error Processing Default Fatal Error Handler Operations" \ +$(srcdir)/bsp.texi: bsp.t + $(BMENU2) -p "Default Fatal Error Processing Default Fatal Error Handler Operations" \ -u "Top" \ - -n "Processor Dependent Information Table" $< + -n "Processor Dependent Information Table" < $< > $@ -cputable.texi: cputable.t - $(BMENU) -p "Board Support Packages Processor Initialization" \ +$(srcdir)/cputable.texi: cputable.t + $(BMENU2) -p "Board Support Packages Processor Initialization" \ -u "Top" \ - -n "Memory Requirements" $< - + -n "Memory Requirements" < $< > $@ # Worksheets Chapter: # 1. Obtain the Shared File # 2. Replace Times and Sizes # 3. Build Node Structure -wksheets.texi: $(top_srcdir)/common/wksheets.t MVME136_TIMES +$(srcdir)/wksheets.texi: $(top_srcdir)/common/wksheets.t MVME136_TIMES ${REPLACE2} -p $(srcdir)/MVME136_TIMES \ - $(top_srcdir)/common/wksheets.t wksheets.t - $(BMENU) -p "Processor Dependent Information Table CPU Dependent Information Table" \ + $(top_srcdir)/common/wksheets.t | \ + $(BMENU2) -p "Processor Dependent Information Table CPU Dependent Information Table" \ -u "Top" \ - -n "Timing Specification" wksheets.t -CLEANFILES += wksheets.t + -n "Timing Specification" > $@ # Timing Specification Chapter: # 1. Copy the Shared File # 3. Build Node Structure -timing.texi: $(top_srcdir)/common/timing.t +$(srcdir)/timing.texi: $(top_srcdir)/common/timing.t $(BMENU2) -p "Memory Requirements RTEMS RAM Workspace Worksheet" \ -u "Top" \ -n "MVME136 Timing Data" < $< > $@ @@ -96,17 +94,16 @@ timing.texi: $(top_srcdir)/common/timing.t # 2. Replace Times and Sizes # 3. Build Node Structure -timeMVME136.texi: $(top_srcdir)/common/timetbl.t timeMVME136.t +$(srcdir)/timeMVME136.texi: $(top_srcdir)/common/timetbl.t timeMVME136.t cat timeMVME136.t $(top_srcdir)/common/timetbl.t >timeMVME136_.t @echo >>timeMVME136_.t @echo "@tex" >>timeMVME136_.t @echo "\\global\\advance \\smallskipamount by 4pt" >>timeMVME136_.t @echo "@end tex" >>timeMVME136_.t - ${REPLACE2} -p MVME136_TIMES timeMVME136_.t timeMVME136_.t - $(BMENU) -p "Timing Specification Terminology" \ + ${REPLACE2} -p MVME136_TIMES timeMVME136_.t | \ + $(BMENU2) -p "Timing Specification Terminology" \ -u "Top" \ - -n "Command and Variable Index" timeMVME136_.t - mv timeMVME136_.texi timeMVME136.texi -CLEANFILES += timeMVME136_.t timeMVME136_.texi + -n "Command and Variable Index" > $@ +CLEANFILES += timeMVME136_.t EXTRA_DIST = MVME136_TIMES *.t diff --git a/doc/supplements/m68k/m68k.texi b/doc/supplements/m68k/m68k.texi index e2e7a833d7..29e175dce3 100644 --- a/doc/supplements/m68k/m68k.texi +++ b/doc/supplements/m68k/m68k.texi @@ -19,27 +19,20 @@ @c Master file for the Motorola MC68xxx Applications Supplement @c +@include version.texi @include ../../common/setup.texi -@ignore -@ifinfo -@format -START-INFO-DIR-ENTRY -* RTEMS Motorola MC68xxx Applications Supplement (m68k): -END-INFO-DIR-ENTRY -@end format -@end ifinfo -@end ignore +@ifset use-ascii +@dircategory RTEMS Target Supplements +@direntry +* RTEMS Motorola MC68xxx Applications Supplement: (m68k). +@end direntry +@end ifset @c @c Title Page Stuff @c -@set edition @value{RTEMS-EDITION} -@set version @value{RTEMS-VERSION} -@set update-date @value{RTEMS-UPDATE-DATE} -@set update-month @value{RTEMS-UPDATE-MONTH} - @c @c I don't really like having a short title page. --joel @c @@ -51,9 +44,9 @@ END-INFO-DIR-ENTRY @finalout @title RTEMS Motorola MC68xxx Applications Supplement -@subtitle Edition @value{edition}, for RTEMS @value{version} +@subtitle Edition @value{EDITION}, for RTEMS @value{VERSION} @sp 1 -@subtitle @value{update-month} +@subtitle @value{UPDATED} @author On-Line Applications Research Corporation @page diff --git a/doc/supplements/m68k/stamp-vti b/doc/supplements/m68k/stamp-vti new file mode 100644 index 0000000000..27e5ccd0cb --- /dev/null +++ b/doc/supplements/m68k/stamp-vti @@ -0,0 +1,3 @@ +@set UPDATED 1 June 2000 +@set EDITION 1 +@set VERSION 4.5.0-beta3 diff --git a/doc/supplements/m68k/version.texi b/doc/supplements/m68k/version.texi new file mode 100644 index 0000000000..27e5ccd0cb --- /dev/null +++ b/doc/supplements/m68k/version.texi @@ -0,0 +1,3 @@ +@set UPDATED 1 June 2000 +@set EDITION 1 +@set VERSION 4.5.0-beta3 diff --git a/doc/supplements/mips64orion/.cvsignore b/doc/supplements/mips64orion/.cvsignore index 3298e98b24..38928e4cda 100644 --- a/doc/supplements/mips64orion/.cvsignore +++ b/doc/supplements/mips64orion/.cvsignore @@ -8,6 +8,7 @@ fatalerr.texi index.html intr.t intr.texi +mdate-sh memmodel.texi mips64orion mips64orion*.html diff --git a/doc/supplements/mips64orion/Makefile.am b/doc/supplements/mips64orion/Makefile.am index f348e65632..9bf19ff988 100644 --- a/doc/supplements/mips64orion/Makefile.am +++ b/doc/supplements/mips64orion/Makefile.am @@ -6,20 +6,21 @@ # $Id$ # -AUTOMAKE_OPTIONS = foreign +AUTOMAKE_OPTIONS = foreign 1.4 -PROJECT=mips64orion +PROJECT = mips64orion +EDITION = 1 include $(top_srcdir)/project.am include $(top_srcdir)/supplements/supplement.am -COMMON_FILES=$(top_srcdir)/common/cpright.texi $(top_builddir)/common/setup.texi +GENERATED_FILES = cpumodel.texi callconv.texi memmodel.texi intr.texi \ + fatalerr.texi bsp.texi cputable.texi wksheets.texi timing.texi \ + timeBSP.texi -GENERATED_FILES=\ - cpumodel.texi callconv.texi memmodel.texi intr.texi fatalerr.texi \ - bsp.texi cputable.texi wksheets.texi timing.texi timeBSP.texi +COMMON_FILES = $(top_srcdir)/common/setup.texi $(top_srcdir)/common/cpright.texi -FILES= preface.texi +FILES = preface.texi info_TEXINFOS = mips64orion.texi mips64orion_TEXINFOS = $(FILES) $(COMMON_FILES) $(GENERATED_FILES) @@ -27,64 +28,63 @@ mips64orion_TEXINFOS = $(FILES) $(COMMON_FILES) $(GENERATED_FILES) # # Chapters which get automatic processing # -cpumodel.texi: cpumodel.t - $(BMENU) -p "Preface" \ + +$(srcdir)/cpumodel.texi: cpumodel.t + $(BMENU2) -p "Preface" \ -u "Top" \ - -n "Calling Conventions" $< + -n "Calling Conventions" < $< > $@ -callconv.texi: callconv.t - $(BMENU) -p "CPU Model Dependent Features Another Optional Feature" \ +$(srcdir)/callconv.texi: callconv.t + $(BMENU2) -p "CPU Model Dependent Features Another Optional Feature" \ -u "Top" \ - -n "Memory Model" $< + -n "Memory Model" < $< > $@ -memmodel.texi: memmodel.t - $(BMENU) -p "Calling Conventions User-Provided Routines" \ +$(srcdir)/memmodel.texi: memmodel.t + $(BMENU2) -p "Calling Conventions User-Provided Routines" \ -u "Top" \ - -n "Interrupt Processing" $< + -n "Interrupt Processing" < $< > $@ # Interrupt Chapter: # 1. Replace Times and Sizes # 2. Build Node Structure -intr.texi: intr_NOTIMES.t BSP_TIMES - ${REPLACE2} -p $(srcdir)/BSP_TIMES $(srcdir)/intr_NOTIMES.t intr.t - $(BMENU) -p "Memory Model Flat Memory Model" \ +$(srcdir)/intr.texi: intr_NOTIMES.t BSP_TIMES + ${REPLACE2} -p $(srcdir)/BSP_TIMES $(srcdir)/intr_NOTIMES.t | \ + $(BMENU2) -p "Memory Model Flat Memory Model" \ -u "Top" \ - -n "Default Fatal Error Processing" intr.t -CLEANFILES += intr.t + -n "Default Fatal Error Processing" > $@ -fatalerr.texi: fatalerr.t - $(BMENU) -p "Interrupt Processing Interrupt Stack" \ +$(srcdir)/fatalerr.texi: fatalerr.t + $(BMENU2) -p "Interrupt Processing Interrupt Stack" \ -u "Top" \ - -n "Board Support Packages" $< + -n "Board Support Packages" < $< > $@ -bsp.texi: bsp.t - $(BMENU) -p "Default Fatal Error Processing Default Fatal Error Handler Operations" \ +$(srcdir)/bsp.texi: bsp.t + $(BMENU2) -p "Default Fatal Error Processing Default Fatal Error Handler Operations" \ -u "Top" \ - -n "Processor Dependent Information Table" $< + -n "Processor Dependent Information Table" < $< > $@ -cputable.texi: cputable.t - $(BMENU) -p "Board Support Packages Processor Initialization" \ +$(srcdir)/cputable.texi: cputable.t + $(BMENU2) -p "Board Support Packages Processor Initialization" \ -u "Top" \ - -n "Memory Requirements" $< + -n "Memory Requirements" < $< > $@ # Worksheets Chapter: # 1. Copy the Shared File # 2. Replace Times and Sizes # 3. Build Node Structure -wksheets.texi: $(top_srcdir)/common/wksheets.t BSP_TIMES +$(srcdir)/wksheets.texi: $(top_srcdir)/common/wksheets.t BSP_TIMES ${REPLACE2} -p $(srcdir)/BSP_TIMES \ - $(top_srcdir)/common/wksheets.t wksheets.t - $(BMENU) -p "Processor Dependent Information Table CPU Dependent Information Table" \ + $(top_srcdir)/common/wksheets.t | \ + $(BMENU2) -p "Processor Dependent Information Table CPU Dependent Information Table" \ -u "Top" \ - -n "Timing Specification" wksheets.t -CLEANFILES += wksheets.t + -n "Timing Specification" > $@ # Timing Specification Chapter: # 1. Copy the Shared File # 3. Build Node Structure -timing.texi: $(top_srcdir)/common/timing.t +$(srcdir)/timing.texi: $(top_srcdir)/common/timing.t $(BMENU2) -p "Memory Requirements RTEMS RAM Workspace Worksheet" \ -u "Top" \ -n "BSP_FOR_TIMES Timing Data" < $< > $@ @@ -94,18 +94,16 @@ timing.texi: $(top_srcdir)/common/timing.t # 2. Replace Times and Sizes # 3. Build Node Structure -timeBSP.texi: $(top_srcdir)/common/timetbl.t timeBSP.t +$(srcdir)/timeBSP.texi: $(top_srcdir)/common/timetbl.t timeBSP.t cat timeBSP.t $(top_srcdir)/common/timetbl.t >timeBSP_.t @echo >>timeBSP_.t @echo "@tex" >>timeBSP_.t @echo "\\global\\advance \\smallskipamount by 4pt" >>timeBSP_.t @echo "@end tex" >>timeBSP_.t - ${REPLACE2} -p BSP_TIMES timeBSP_.t timeBSP_.t - $(BMENU) -p "Timing Specification Terminology" \ + ${REPLACE2} -p BSP_TIMES timeBSP_.t | \ + $(BMENU2) -p "Timing Specification Terminology" \ -u "Top" \ - -n "Command and Variable Index" timeBSP_.t - mv timeBSP_.texi timeBSP.texi -CLEANFILES += timeBSP_.t timeBSP_.texi - + -n "Command and Variable Index" > $@ +CLEANFILES += timeBSP_.t EXTRA_DIST = BSP_TIMES *.t diff --git a/doc/supplements/mips64orion/mips64orion.texi b/doc/supplements/mips64orion/mips64orion.texi index acd974ce1a..ca3090b11e 100644 --- a/doc/supplements/mips64orion/mips64orion.texi +++ b/doc/supplements/mips64orion/mips64orion.texi @@ -19,27 +19,20 @@ @c Master file for the Template Applications Supplement @c +@include version.texi @include ../../common/setup.texi -@ignore -@ifinfo -@format -START-INFO-DIR-ENTRY -* RTEMS MIPS64 Orion Applications Supplement (mips64orion): -END-INFO-DIR-ENTRY -@end format -@end ifinfo -@end ignore +@ifset use-ascii +@dircategory RTEMS Target Supplements +@direntry +* RTEMS MIPS64 Orion Applications Supplement: (mips64orion). +@end direntry +@end ifset @c @c Title Page Stuff @c -@set edition @value{RTEMS-EDITION} -@set version @value{RTEMS-VERSION} -@set update-date @value{RTEMS-UPDATE-DATE} -@set update-month @value{RTEMS-UPDATE-MONTH} - @c @c I don't really like having a short title page. --joel @c @@ -51,9 +44,9 @@ END-INFO-DIR-ENTRY @finalout @title RTEMS MIPS64 Orion Applications Supplement -@subtitle Edition @value{edition}, for RTEMS @value{version} +@subtitle Edition @value{EDITION}, for RTEMS @value{VERSION} @sp 1 -@subtitle @value{update-month} +@subtitle @value{UPDATED} @author On-Line Applications Research Corporation @page diff --git a/doc/supplements/mips64orion/stamp-vti b/doc/supplements/mips64orion/stamp-vti new file mode 100644 index 0000000000..27e5ccd0cb --- /dev/null +++ b/doc/supplements/mips64orion/stamp-vti @@ -0,0 +1,3 @@ +@set UPDATED 1 June 2000 +@set EDITION 1 +@set VERSION 4.5.0-beta3 diff --git a/doc/supplements/mips64orion/version.texi b/doc/supplements/mips64orion/version.texi new file mode 100644 index 0000000000..27e5ccd0cb --- /dev/null +++ b/doc/supplements/mips64orion/version.texi @@ -0,0 +1,3 @@ +@set UPDATED 1 June 2000 +@set EDITION 1 +@set VERSION 4.5.0-beta3 diff --git a/doc/supplements/powerpc/.cvsignore b/doc/supplements/powerpc/.cvsignore index 555f15eddb..fed36d0ebd 100644 --- a/doc/supplements/powerpc/.cvsignore +++ b/doc/supplements/powerpc/.cvsignore @@ -8,6 +8,7 @@ fatalerr.texi index.html intr.t intr.texi +mdate-sh memmodel.texi powerpc powerpc*.html diff --git a/doc/supplements/powerpc/Makefile.am b/doc/supplements/powerpc/Makefile.am index 37b6bc324b..de1b709db0 100644 --- a/doc/supplements/powerpc/Makefile.am +++ b/doc/supplements/powerpc/Makefile.am @@ -6,20 +6,20 @@ # $Id$ # -AUTOMAKE_OPTIONS = foreign +AUTOMAKE_OPTIONS = foreign 1.4 -PROJECT=powerpc +PROJECT = powerpc +EDITION = 1 include $(top_srcdir)/project.am include $(top_srcdir)/supplements/supplement.am -COMMON_FILES=$(top_srcdir)/common/cpright.texi $(top_builddir)/common/setup.texi +GENERATED_FILES = cpumodel.texi callconv.texi memmodel.texi intr.texi \ + fatalerr.texi bsp.texi cputable.texi timing.texi wksheets.texi \ + timePSIM.texi timeDMV177.texi +COMMON_FILES = $(top_srcdir)/common/setup.texi $(top_srcdir)/common/cpright.texi -GENERATED_FILES=\ - cpumodel.texi callconv.texi memmodel.texi intr.texi fatalerr.texi \ - bsp.texi cputable.texi timing.texi wksheets.texi timePSIM.texi timeDMV177.texi - -FILES= preface.texi +FILES = preface.texi info_TEXINFOS = powerpc.texi powerpc_TEXINFOS = $(FILES) $(COMMON_FILES) $(GENERATED_FILES) @@ -28,63 +28,61 @@ powerpc_TEXINFOS = $(FILES) $(COMMON_FILES) $(GENERATED_FILES) # Chapters which get automatic processing # -cpumodel.texi: cpumodel.t - $(BMENU) -p "Preface" \ +$(srcdir)/cpumodel.texi: cpumodel.t + $(BMENU2) -p "Preface" \ -u "Top" \ - -n "Calling Conventions" $< + -n "Calling Conventions" < $< > $@ -callconv.texi: callconv.t - $(BMENU) -p "CPU Model Dependent Features Low Power Model" \ +$(srcdir)/callconv.texi: callconv.t + $(BMENU2) -p "CPU Model Dependent Features Low Power Model" \ -u "Top" \ - -n "Memory Model" $< + -n "Memory Model" < $< > $@ -memmodel.texi: memmodel.t - $(BMENU) -p "Calling Conventions User-Provided Routines" \ +$(srcdir)/memmodel.texi: memmodel.t + $(BMENU2) -p "Calling Conventions User-Provided Routines" \ -u "Top" \ - -n "Interrupt Processing" $< + -n "Interrupt Processing" < $< > $@ # Interrupt Chapter: # 1. Replace Times and Sizes # 2. Build Node Structure -intr.texi: intr_NOTIMES.t PSIM_TIMES - ${REPLACE2} -p $(srcdir)/PSIM_TIMES $(srcdir)/intr_NOTIMES.t intr.t - $(BMENU) -p "Memory Model Flat Memory Model" \ +$(srcdir)/intr.texi: intr_NOTIMES.t PSIM_TIMES + ${REPLACE2} -p $(srcdir)/PSIM_TIMES $(srcdir)/intr_NOTIMES.t | \ + $(BMENU2) -p "Memory Model Flat Memory Model" \ -u "Top" \ - -n "Default Fatal Error Processing" intr.t -CLEANFILES += intr.t + -n "Default Fatal Error Processing" > $@ -fatalerr.texi: fatalerr.t - $(BMENU) -p "Interrupt Processing Interrupt Stack" \ +$(srcdir)/fatalerr.texi: fatalerr.t + $(BMENU2) -p "Interrupt Processing Interrupt Stack" \ -u "Top" \ - -n "Board Support Packages" $< + -n "Board Support Packages" < $< > $@ -bsp.texi: bsp.t - $(BMENU) -p "Default Fatal Error Processing Default Fatal Error Handler Operations" \ +$(srcdir)/bsp.texi: bsp.t + $(BMENU2) -p "Default Fatal Error Processing Default Fatal Error Handler Operations" \ -u "Top" \ - -n "Processor Dependent Information Table" $< + -n "Processor Dependent Information Table" < $< > $@ -cputable.texi: cputable.t - $(BMENU) -p "Board Support Packages Processor Initialization" \ +$(srcdir)/cputable.texi: cputable.t + $(BMENU2) -p "Board Support Packages Processor Initialization" \ -u "Top" \ - -n "Memory Requirements" $< + -n "Memory Requirements" < $< > $@ # Worksheets Chapter: # 1. Obtain the Shared File # 2. Replace Times and Sizes # 3. Build Node Structure -wksheets.texi: $(top_srcdir)/common/wksheets.t PSIM_TIMES +$(srcdir)/wksheets.texi: $(top_srcdir)/common/wksheets.t PSIM_TIMES ${REPLACE2} -p $(srcdir)/PSIM_TIMES \ - $(top_srcdir)/common/wksheets.t wksheets.t - $(BMENU) -p "Processor Dependent Information Table CPU Dependent Information Table" \ + $(top_srcdir)/common/wksheets.t | \ + $(BMENU2) -p "Processor Dependent Information Table CPU Dependent Information Table" \ -u "Top" \ - -n "Timing Specification" wksheets.t -CLEANFILES += wksheets.t + -n "Timing Specification" > $@ # Timing Specification Chapter: # 1. Copy the Shared File # 3. Build Node Structure -timing.texi: $(top_srcdir)/common/timing.t +$(srcdir)/timing.texi: $(top_srcdir)/common/timing.t $(BMENU2) -p "Memory Requirements RTEMS RAM Workspace Worksheet" \ -u "Top" \ -n "PSIM Timing Data" < $< > $@ @@ -94,37 +92,33 @@ timing.texi: $(top_srcdir)/common/timing.t # 2. Replace Times and Sizes # 3. Build Node Structure -timePSIM.texi: $(top_srcdir)/common/timetbl.t timePSIM.t +$(srcdir)/timePSIM.texi: $(top_srcdir)/common/timetbl.t timePSIM.t cat timePSIM.t $(top_srcdir)/common/timetbl.t >timePSIM_.t @echo >>timePSIM_.t @echo "@tex" >>timePSIM_.t @echo "\\global\\advance \\smallskipamount by 4pt" >>timePSIM_.t @echo "@end tex" >>timePSIM_.t - ${REPLACE2} -p PSIM_TIMES timePSIM_.t timePSIM_.t - $(BMENU) -p "Timing Specification Terminology" \ + ${REPLACE2} -p PSIM_TIMES timePSIM_.t | \ + $(BMENU2) -p "Timing Specification Terminology" \ -u "Top" \ - -n "DMV177 Timing Data" timePSIM_.t - mv timePSIM_.texi timePSIM.texi -CLEANFILES += timePSIM_.t timePSIM_.texi - + -n "DMV177 Timing Data" > $@ +CLEANFILES += timePSIM_.t # Timing Data for DMV177 BSP Chapter: # 1. Copy the Shared File # 2. Replace Times and Sizes # 3. Build Node Structure -timeDMV177.texi: $(top_srcdir)/common/timetbl.t timeDMV177.t +$(srcdir)/timeDMV177.texi: $(top_srcdir)/common/timetbl.t timeDMV177.t cat timeDMV177.t $(top_srcdir)/common/timetbl.t >timeDMV177_.t @echo >>timeDMV177_.t @echo "@tex" >>timeDMV177_.t @echo "\\global\\advance \\smallskipamount by 4pt" >>timeDMV177_.t @echo "@end tex" >>timeDMV177_.t - ${REPLACE2} -p DMV177_TIMES timeDMV177_.t timeDMV177_.t - $(BMENU) -p "PSIM Timing Data Rate Monotonic Manager" \ + ${REPLACE2} -p DMV177_TIMES timeDMV177_.t | \ + $(BMENU2) -p "PSIM Timing Data Rate Monotonic Manager" \ -u "Top" \ - -n "Command and Variable Index" timeDMV177_.t - mv timeDMV177_.texi timeDMV177.texi -CLEANFILES += timeDMV177_.t timeDMV177_.texi - + -n "Command and Variable Index" > $@ +CLEANFILES += timeDMV177_.t EXTRA_DIST = DMV177_TIMES PSIM_TIMES *.t diff --git a/doc/supplements/powerpc/powerpc.texi b/doc/supplements/powerpc/powerpc.texi index 2047f421e8..1938d0ca07 100644 --- a/doc/supplements/powerpc/powerpc.texi +++ b/doc/supplements/powerpc/powerpc.texi @@ -19,27 +19,20 @@ @c Master file for the PowerPC Applications Supplement @c +@include version.texi @include ../../common/setup.texi -@ignore -@ifinfo -@format -START-INFO-DIR-ENTRY -* RTEMS PowerPC Applications Supplement (powerpc): -END-INFO-DIR-ENTRY -@end format -@end ifinfo -@end ignore +@ifset use-ascii +@dircategory RTEMS Target Supplements +@direntry +* RTEMS PowerPC Applications Supplement: (powerpc). +@end direntry +@end ifset @c @c Title Page Stuff @c -@set edition @value{RTEMS-EDITION} -@set version @value{RTEMS-VERSION} -@set update-date @value{RTEMS-UPDATE-DATE} -@set update-month @value{RTEMS-UPDATE-MONTH} - @c @c I don't really like having a short title page. --joel @c @@ -51,9 +44,9 @@ END-INFO-DIR-ENTRY @finalout @title RTEMS PowerPC Applications Supplement -@subtitle Edition @value{edition}, for RTEMS @value{version} +@subtitle Edition @value{EDITION}, for RTEMS @value{VERSION} @sp 1 -@subtitle @value{update-month} +@subtitle @value{UPDATED} @author On-Line Applications Research Corporation @page @include ../../common/cpright.texi diff --git a/doc/supplements/powerpc/stamp-vti b/doc/supplements/powerpc/stamp-vti new file mode 100644 index 0000000000..27e5ccd0cb --- /dev/null +++ b/doc/supplements/powerpc/stamp-vti @@ -0,0 +1,3 @@ +@set UPDATED 1 June 2000 +@set EDITION 1 +@set VERSION 4.5.0-beta3 diff --git a/doc/supplements/powerpc/version.texi b/doc/supplements/powerpc/version.texi new file mode 100644 index 0000000000..27e5ccd0cb --- /dev/null +++ b/doc/supplements/powerpc/version.texi @@ -0,0 +1,3 @@ +@set UPDATED 1 June 2000 +@set EDITION 1 +@set VERSION 4.5.0-beta3 diff --git a/doc/supplements/sh/.cvsignore b/doc/supplements/sh/.cvsignore index 70b01913e0..c270acc560 100644 --- a/doc/supplements/sh/.cvsignore +++ b/doc/supplements/sh/.cvsignore @@ -8,6 +8,7 @@ fatalerr.texi index.html intr.t intr.texi +mdate-sh memmodel.texi sh sh*.html diff --git a/doc/supplements/sh/Makefile.am b/doc/supplements/sh/Makefile.am index 28338faaf2..962f7e66db 100644 --- a/doc/supplements/sh/Makefile.am +++ b/doc/supplements/sh/Makefile.am @@ -6,20 +6,21 @@ # $Id$ # -AUTOMAKE_OPTIONS = foreign +AUTOMAKE_OPTIONS = foreign 1.4 -PROJECT=sh +PROJECT = sh +EDITION = 1 include $(top_srcdir)/project.am include $(top_srcdir)/supplements/supplement.am -COMMON_FILES= $(top_srcdir)/common/cpright.texi $(top_builddir)/common/setup.texi +GENERATED_FILES = cpumodel.texi callconv.texi memmodel.texi intr.texi \ + fatalerr.texi bsp.texi cputable.texi wksheets.texi timing.texi \ + timeBSP.texi -GENERATED_FILES=\ - cpumodel.texi callconv.texi memmodel.texi intr.texi fatalerr.texi \ - bsp.texi cputable.texi wksheets.texi timing.texi timeBSP.texi +COMMON_FILES = $(top_srcdir)/common/setup.texi $(top_srcdir)/common/cpright.texi -FILES= preface.texi +FILES = preface.texi info_TEXINFOS = sh.texi sh_TEXINFOS = $(FILES) $(COMMON_FILES) $(GENERATED_FILES) @@ -27,64 +28,63 @@ sh_TEXINFOS = $(FILES) $(COMMON_FILES) $(GENERATED_FILES) # # Chapters which get automatic processing # -cpumodel.texi: cpumodel.t - $(BMENU) -p "Preface" \ + +$(srcdir)/cpumodel.texi: cpumodel.t + $(BMENU2) -p "Preface" \ -u "Top" \ - -n "Calling Conventions" $< + -n "Calling Conventions" < $< > $@ -callconv.texi: callconv.t - $(BMENU) -p "CPU Model Dependent Features Another Optional Feature" \ +$(srcdir)/callconv.texi: callconv.t + $(BMENU2) -p "CPU Model Dependent Features Another Optional Feature" \ -u "Top" \ - -n "Memory Model" $< + -n "Memory Model" < $< > $@ -memmodel.texi: memmodel.t - $(BMENU) -p "Calling Conventions User-Provided Routines" \ +$(srcdir)/memmodel.texi: memmodel.t + $(BMENU2) -p "Calling Conventions User-Provided Routines" \ -u "Top" \ - -n "Interrupt Processing" $< + -n "Interrupt Processing" < $< > $@ # Interrupt Chapter: # 1. Replace Times and Sizes # 2. Build Node Structure -intr.texi: intr_NOTIMES.t BSP_TIMES - ${REPLACE2} -p $(srcdir)/BSP_TIMES $(srcdir)/intr_NOTIMES.t intr.t - $(BMENU) -p "Memory Model Flat Memory Model" \ +$(srcdir)/intr.texi: intr_NOTIMES.t BSP_TIMES + ${REPLACE2} -p $(srcdir)/BSP_TIMES $(srcdir)/intr_NOTIMES.t | \ + $(BMENU2) -p "Memory Model Flat Memory Model" \ -u "Top" \ - -n "Default Fatal Error Processing" intr.t -CLEANFILES += intr.t + -n "Default Fatal Error Processing" > $@ -fatalerr.texi: fatalerr.t - $(BMENU) -p "Interrupt Processing Interrupt Stack" \ +$(srcdir)/fatalerr.texi: fatalerr.t + $(BMENU2) -p "Interrupt Processing Interrupt Stack" \ -u "Top" \ - -n "Board Support Packages" $< + -n "Board Support Packages" < $< > $@ -bsp.texi: bsp.t - $(BMENU) -p "Default Fatal Error Processing Default Fatal Error Handler Operations" \ +$(srcdir)/bsp.texi: bsp.t + $(BMENU2) -p "Default Fatal Error Processing Default Fatal Error Handler Operations" \ -u "Top" \ - -n "Processor Dependent Information Table" $< + -n "Processor Dependent Information Table" < $< > $@ -cputable.texi: cputable.t - $(BMENU) -p "Board Support Packages Processor Initialization" \ +$(srcdir)/cputable.texi: cputable.t + $(BMENU2) -p "Board Support Packages Processor Initialization" \ -u "Top" \ - -n "Memory Requirements" $< + -n "Memory Requirements" < $< > $@ # Worksheets Chapter: # 1. Copy the Shared File # 2. Replace Times and Sizes # 3. Build Node Structure -wksheets.texi: $(top_srcdir)/common/wksheets.t BSP_TIMES +$(srcdir)/wksheets.texi: $(top_srcdir)/common/wksheets.t BSP_TIMES ${REPLACE2} -p $(srcdir)/BSP_TIMES \ - $(top_srcdir)/common/wksheets.t wksheets.t - $(BMENU) -p "Processor Dependent Information Table CPU Dependent Information Table" \ + $(top_srcdir)/common/wksheets.t | \ + $(BMENU2) -p "Processor Dependent Information Table CPU Dependent Information Table" \ -u "Top" \ - -n "Timing Specification" wksheets.t -CLEANFILES += wksheets.t + -n "Timing Specification" > $@ # Timing Specification Chapter: # 1. Copy the Shared File # 3. Build Node Structure -timing.texi: $(top_srcdir)/common/timing.t +$(srcdir)/timing.texi: $(top_srcdir)/common/timing.t $(BMENU2) -p "Memory Requirements RTEMS RAM Workspace Worksheet" \ -u "Top" \ -n "BSP_FOR_TIMES Timing Data" < $< > $@ @@ -94,18 +94,16 @@ timing.texi: $(top_srcdir)/common/timing.t # 2. Replace Times and Sizes # 3. Build Node Structure -timeBSP.texi: $(top_srcdir)/common/timetbl.t timeBSP.t +$(srcdir)/timeBSP.texi: $(top_srcdir)/common/timetbl.t timeBSP.t cat timeBSP.t $(top_srcdir)/common/timetbl.t >timeBSP_.t @echo >>timeBSP_.t @echo "@tex" >>timeBSP_.t @echo "\\global\\advance \\smallskipamount by 4pt" >>timeBSP_.t @echo "@end tex" >>timeBSP_.t - ${REPLACE2} -p BSP_TIMES timeBSP_.t timeBSP_.t - $(BMENU) -p "Timing Specification Terminology" \ + ${REPLACE2} -p BSP_TIMES timeBSP_.t | \ + $(BMENU2) -p "Timing Specification Terminology" \ -u "Top" \ - -n "Command and Variable Index" timeBSP_.t - mv timeBSP_.texi timeBSP.texi -CLEANFILES += timeBSP_.t timeBSP_.texi - + -n "Command and Variable Index" > $@ +CLEANFILES += timeBSP_.t EXTRA_DIST = BSP_TIMES *.t diff --git a/doc/supplements/sh/sh.texi b/doc/supplements/sh/sh.texi index e49a434972..23e3a90223 100644 --- a/doc/supplements/sh/sh.texi +++ b/doc/supplements/sh/sh.texi @@ -19,27 +19,20 @@ @c Master file for the Template Applications Supplement @c +@include version.texi @include ../../common/setup.texi -@ignore -@ifinfo -@format -START-INFO-DIR-ENTRY -* RTEMS Hitachi SH Applications Supplement (sh): -END-INFO-DIR-ENTRY -@end format -@end ifinfo -@end ignore +@ifset use-ascii +@dircategory RTEMS Target Supplements +@direntry +* RTEMS Hitachi SH Applications Supplement: (sh). +@end direntry +@end ifset @c @c Title Page Stuff @c -@set edition @value{RTEMS-EDITION} -@set version @value{RTEMS-VERSION} -@set update-date @value{RTEMS-UPDATE-DATE} -@set update-month @value{RTEMS-UPDATE-MONTH} - @c @c I don't really like having a short title page. --joel @c @@ -51,9 +44,9 @@ END-INFO-DIR-ENTRY @finalout @title RTEMS Hitachi SH Applications Supplement -@subtitle Edition @value{edition}, for RTEMS @value{version} +@subtitle Edition @value{EDITION}, for RTEMS @value{VERSION} @sp 1 -@subtitle @value{update-month} +@subtitle @value{UPDATED} @author On-Line Applications Research Corporation @page diff --git a/doc/supplements/sh/stamp-vti b/doc/supplements/sh/stamp-vti new file mode 100644 index 0000000000..27e5ccd0cb --- /dev/null +++ b/doc/supplements/sh/stamp-vti @@ -0,0 +1,3 @@ +@set UPDATED 1 June 2000 +@set EDITION 1 +@set VERSION 4.5.0-beta3 diff --git a/doc/supplements/sh/version.texi b/doc/supplements/sh/version.texi new file mode 100644 index 0000000000..27e5ccd0cb --- /dev/null +++ b/doc/supplements/sh/version.texi @@ -0,0 +1,3 @@ +@set UPDATED 1 June 2000 +@set EDITION 1 +@set VERSION 4.5.0-beta3 diff --git a/doc/supplements/sparc/.cvsignore b/doc/supplements/sparc/.cvsignore index b49f532f76..918ba3fff0 100644 --- a/doc/supplements/sparc/.cvsignore +++ b/doc/supplements/sparc/.cvsignore @@ -8,6 +8,7 @@ fatalerr.texi index.html intr.t intr.texi +mdate-sh memmodel.texi sparc sparc*.html diff --git a/doc/supplements/sparc/Makefile.am b/doc/supplements/sparc/Makefile.am index d411f94283..ee426a510b 100644 --- a/doc/supplements/sparc/Makefile.am +++ b/doc/supplements/sparc/Makefile.am @@ -6,20 +6,21 @@ # $Id$ # -AUTOMAKE_OPTIONS = foreign +AUTOMAKE_OPTIONS = foreign 1.4 -PROJECT=sparc +PROJECT = sparc +EDITION = 1 include $(top_srcdir)/project.am include $(top_srcdir)/supplements/supplement.am -COMMON_FILES=$(top_srcdir)/common/cpright.texi $(top_builddir)/common/setup.texi +GENERATED_FILES = cpumodel.texi callconv.texi memmodel.texi intr.texi \ + fatalerr.texi bsp.texi cputable.texi timing.texi wksheets.texi \ + timeERC32.texi -GENERATED_FILES=\ - cpumodel.texi callconv.texi memmodel.texi intr.texi fatalerr.texi \ - bsp.texi cputable.texi timing.texi wksheets.texi timeERC32.texi +COMMON_FILES = $(top_srcdir)/common/setup.texi $(top_srcdir)/common/cpright.texi -FILES= preface.texi +FILES = preface.texi info_TEXINFOS = sparc.texi sparc_TEXINFOS = $(FILES) $(COMMON_FILES) $(GENERATED_FILES) @@ -28,64 +29,60 @@ sparc_TEXINFOS = $(FILES) $(COMMON_FILES) $(GENERATED_FILES) # Chapters which get automatic processing # -cpumodel.texi: cpumodel.t - $(BMENU) -p "Preface" \ +$(srcdir)/cpumodel.texi: cpumodel.t + $(BMENU2) -p "Preface" \ -u "Top" \ - -n "Calling Conventions" $< + -n "Calling Conventions" < $< > $@ -callconv.texi: callconv.t - $(BMENU) -p "CPU Model Dependent Features CPU Model Implementation Notes" \ +$(srcdir)/callconv.texi: callconv.t + $(BMENU2) -p "CPU Model Dependent Features CPU Model Implementation Notes" \ -u "Top" \ - -n "Memory Model" $< + -n "Memory Model" < $< > $@ -memmodel.texi: memmodel.t - $(BMENU) -p "Calling Conventions User-Provided Routines" \ +$(srcdir)/memmodel.texi: memmodel.t + $(BMENU2) -p "Calling Conventions User-Provided Routines" \ -u "Top" \ - -n "Interrupt Processing" $< + -n "Interrupt Processing" < $< > $@ # Interrupt Chapter: # 1. Replace Times and Sizes # 2. Build Node Structure -intr.texi: intr_NOTIMES.t ERC32_TIMES - ${REPLACE2} -p $(srcdir)/ERC32_TIMES $(srcdir)/intr_NOTIMES.t intr.t - $(BMENU) -p "Memory Model Flat Memory Model" \ +$(srcdir)/intr.texi: intr_NOTIMES.t ERC32_TIMES + ${REPLACE2} -p $(srcdir)/ERC32_TIMES $(srcdir)/intr_NOTIMES.t | \ + $(BMENU2) -p "Memory Model Flat Memory Model" \ -u "Top" \ - -n "Default Fatal Error Processing" intr.t -CLEANFILES += intr.t + -n "Default Fatal Error Processing" > $@ -fatalerr.texi: fatalerr.t - $(BMENU) -p "Interrupt Processing Interrupt Stack" \ +$(srcdir)/fatalerr.texi: fatalerr.t + $(BMENU2) -p "Interrupt Processing Interrupt Stack" \ -u "Top" \ - -n "Board Support Packages" $< + -n "Board Support Packages" < $< > $@ -bsp.texi: bsp.t - $(BMENU) -p "Default Fatal Error Processing Default Fatal Error Handler Operations" \ +$(srcdir)/bsp.texi: bsp.t + $(BMENU2) -p "Default Fatal Error Processing Default Fatal Error Handler Operations" \ -u "Top" \ - -n "Processor Dependent Information Table" $< + -n "Processor Dependent Information Table" < $< > $@ -cputable.texi: cputable.t - $(BMENU) -p "Board Support Packages Processor Initialization" \ +$(srcdir)/cputable.texi: cputable.t + $(BMENU2) -p "Board Support Packages Processor Initialization" \ -u "Top" \ - -n "Memory Requirements" $< - + -n "Memory Requirements" < $< > $@ # Worksheets Chapter: # 1. Obtain the Shared File # 2. Replace Times and Sizes # 3. Build Node Structure -wksheets.texi: $(top_srcdir)/common/wksheets.t ERC32_TIMES - ${REPLACE2} -p $(srcdir)/ERC32_TIMES \ - $(top_srcdir)/common/wksheets.t wksheets.t - $(BMENU) -p "Processor Dependent Information Table CPU Dependent Information Table" \ +$(srcdir)/wksheets.texi: $(top_srcdir)/common/wksheets.t ERC32_TIMES + ${REPLACE2} -p $(srcdir)/ERC32_TIMES $(top_srcdir)/common/wksheets.t | \ + $(BMENU2) -p "Processor Dependent Information Table CPU Dependent Information Table" \ -u "Top" \ - -n "Timing Specification" wksheets.t -CLEANFILES += wksheets.t + -n "Timing Specification" > $@ # Timing Specification Chapter: # 1. Copy the Shared File # 3. Build Node Structure -timing.texi: $(top_srcdir)/common/timing.t +$(srcdir)/timing.texi: $(top_srcdir)/common/timing.t $(BMENU2) -p "Memory Requirements RTEMS RAM Workspace Worksheet" \ -u "Top" \ -n "ERC32 Timing Data" < $< > $@ @@ -95,17 +92,16 @@ timing.texi: $(top_srcdir)/common/timing.t # 2. Replace Times and Sizes # 3. Build Node Structure -timeERC32.texi: $(top_srcdir)/common/timetbl.t timeERC32.t +$(srcdir)/timeERC32.texi: $(top_srcdir)/common/timetbl.t timeERC32.t cat timeERC32.t $(top_srcdir)/common/timetbl.t >timeERC32_.t @echo >>timeERC32_.t @echo "@tex" >>timeERC32_.t @echo "\\global\\advance \\smallskipamount by 4pt" >>timeERC32_.t @echo "@end tex" >>timeERC32_.t - ${REPLACE2} -p ERC32_TIMES timeERC32_.t timeERC32_.t - $(BMENU) -p "Timing Specification Terminology" \ + ${REPLACE2} -p ERC32_TIMES timeERC32_.t | \ + $(BMENU2) -p "Timing Specification Terminology" \ -u "Top" \ - -n "Command and Variable Index" timeERC32_.t - mv timeERC32_.texi timeERC32.texi -CLEANFILES += timeERC32_.t timeERC32_.texi + -n "Command and Variable Index" > $@ +CLEANFILES += timeERC32_.t EXTRA_DIST = ERC32_TIMES *.t diff --git a/doc/supplements/sparc/sparc.texi b/doc/supplements/sparc/sparc.texi index 0fece23906..833dea597d 100644 --- a/doc/supplements/sparc/sparc.texi +++ b/doc/supplements/sparc/sparc.texi @@ -19,27 +19,20 @@ @c Master file for the SPARC Applications Supplement @c +@include version.texi @include ../../common/setup.texi -@ignore -@ifinfo -@format -START-INFO-DIR-ENTRY -* RTEMS SPARC Applications Supplement (sparc): -END-INFO-DIR-ENTRY -@end format -@end ifinfo -@end ignore +@ifset use-ascii +@dircategory RTEMS Target Supplements +@direntry +* RTEMS SPARC Applications Supplement: (sparc). +@end direntry +@end ifset @c @c Title Page Stuff @c -@set edition @value{RTEMS-EDITION} -@set version @value{RTEMS-VERSION} -@set update-date @value{RTEMS-UPDATE-DATE} -@set update-month @value{RTEMS-UPDATE-MONTH} - @c @c I don't really like having a short title page. --joel @c @@ -51,9 +44,9 @@ END-INFO-DIR-ENTRY @finalout @title RTEMS SPARC Applications Supplement -@subtitle Edition @value{edition}, for RTEMS @value{version} +@subtitle Edition @value{EDITION}, for RTEMS @value{VERSION} @sp 1 -@subtitle @value{update-month} +@subtitle @value{UPDATED} @author On-Line Applications Research Corporation @page @include ../../common/cpright.texi diff --git a/doc/supplements/sparc/stamp-vti b/doc/supplements/sparc/stamp-vti new file mode 100644 index 0000000000..27e5ccd0cb --- /dev/null +++ b/doc/supplements/sparc/stamp-vti @@ -0,0 +1,3 @@ +@set UPDATED 1 June 2000 +@set EDITION 1 +@set VERSION 4.5.0-beta3 diff --git a/doc/supplements/sparc/version.texi b/doc/supplements/sparc/version.texi new file mode 100644 index 0000000000..27e5ccd0cb --- /dev/null +++ b/doc/supplements/sparc/version.texi @@ -0,0 +1,3 @@ +@set UPDATED 1 June 2000 +@set EDITION 1 +@set VERSION 4.5.0-beta3 diff --git a/doc/supplements/template/.cvsignore b/doc/supplements/template/.cvsignore index 2354989302..96541f861d 100644 --- a/doc/supplements/template/.cvsignore +++ b/doc/supplements/template/.cvsignore @@ -8,6 +8,7 @@ fatalerr.texi index.html intr.t intr.texi +mdate-sh memmodel.texi template template*.html diff --git a/doc/supplements/template/Makefile.am b/doc/supplements/template/Makefile.am index f50f7203a2..4edf460b1a 100644 --- a/doc/supplements/template/Makefile.am +++ b/doc/supplements/template/Makefile.am @@ -6,20 +6,20 @@ # $Id$ # -AUTOMAKE_OPTIONS = foreign +AUTOMAKE_OPTIONS = foreign 1.4 -PROJECT=template +PROJECT = template +EDITION = 1 include $(top_srcdir)/project.am include $(top_srcdir)/supplements/supplement.am -COMMON_FILES= $(top_srcdir)/common/cpright.texi $(top_builddir)/common/setup.texi +GENERATED_FILES = cpumodel.texi callconv.texi memmodel.texi intr.texi \ + fatalerr.texi bsp.texi cputable.texi wksheets.texi timing.texi \ + timeBSP.texi +COMMON_FILES = $(top_srcdir)/common/setup.texi $(top_srcdir)/common/cpright.texi -GENERATED_FILES=\ - cpumodel.texi callconv.texi memmodel.texi intr.texi fatalerr.texi \ - bsp.texi cputable.texi wksheets.texi timing.texi timeBSP.texi - -FILES= preface.texi +FILES = preface.texi info_TEXINFOS = template.texi template_TEXINFOS = $(FILES) $(COMMON_FILES) $(GENERATED_FILES) @@ -27,64 +27,63 @@ template_TEXINFOS = $(FILES) $(COMMON_FILES) $(GENERATED_FILES) # # Chapters which get automatic processing # -cpumodel.texi: cpumodel.t - $(BMENU) -p "Preface" \ + +$(srcdir)/cpumodel.texi: cpumodel.t + $(BMENU2) -p "Preface" \ -u "Top" \ - -n "Calling Conventions" $< + -n "Calling Conventions" < $< > $@ -callconv.texi: callconv.t - $(BMENU) -p "CPU Model Dependent Features Another Optional Feature" \ +$(srcdir)/callconv.texi: callconv.t + $(BMENU2) -p "CPU Model Dependent Features Another Optional Feature" \ -u "Top" \ - -n "Memory Model" $< + -n "Memory Model" < $< > $@ -memmodel.texi: memmodel.t - $(BMENU) -p "Calling Conventions User-Provided Routines" \ +$(srcdir)/memmodel.texi: memmodel.t + $(BMENU2) -p "Calling Conventions User-Provided Routines" \ -u "Top" \ - -n "Interrupt Processing" $< + -n "Interrupt Processing" < $< > $@ # Interrupt Chapter: # 1. Replace Times and Sizes # 2. Build Node Structure -intr.texi: intr_NOTIMES.t BSP_TIMES - ${REPLACE2} -p $(srcdir)/BSP_TIMES $(srcdir)/intr_NOTIMES.t intr.t - $(BMENU) -p "Memory Model Flat Memory Model" \ +$(srcdir)/intr.texi: intr_NOTIMES.t BSP_TIMES + ${REPLACE2} -p $(srcdir)/BSP_TIMES $(srcdir)/intr_NOTIMES.t | \ + $(BMENU2) -p "Memory Model Flat Memory Model" \ -u "Top" \ - -n "Default Fatal Error Processing" intr.t -CLEANFILES += intr.t + -n "Default Fatal Error Processing" > $@ -fatalerr.texi: fatalerr.t - $(BMENU) -p "Interrupt Processing Interrupt Stack" \ +$(srcdir)/fatalerr.texi: fatalerr.t + $(BMENU2) -p "Interrupt Processing Interrupt Stack" \ -u "Top" \ - -n "Board Support Packages" $< + -n "Board Support Packages" < $< > $@ -bsp.texi: bsp.t - $(BMENU) -p "Default Fatal Error Processing Default Fatal Error Handler Operations" \ +$(srcdir)/bsp.texi: bsp.t + $(BMENU2) -p "Default Fatal Error Processing Default Fatal Error Handler Operations" \ -u "Top" \ - -n "Processor Dependent Information Table" $< + -n "Processor Dependent Information Table" < $< > $@ -cputable.texi: cputable.t - $(BMENU) -p "Board Support Packages Processor Initialization" \ +$(srcdir)/cputable.texi: cputable.t + $(BMENU2) -p "Board Support Packages Processor Initialization" \ -u "Top" \ - -n "Memory Requirements" $< + -n "Memory Requirements" < $< > $@ # Worksheets Chapter: # 1. Obtain the Shared File # 2. Replace Times and Sizes # 3. Build Node Structure -wksheets.texi: $(top_srcdir)/common/wksheets.t BSP_TIMES +$(srcdir)/wksheets.texi: $(top_srcdir)/common/wksheets.t BSP_TIMES ${REPLACE2} -p $(srcdir)/BSP_TIMES \ - $(top_srcdir)/common/wksheets.t wksheets.t - $(BMENU) -p "Processor Dependent Information Table CPU Dependent Information Table" \ + $(top_srcdir)/common/wksheets.t | \ + $(BMENU2) -p "Processor Dependent Information Table CPU Dependent Information Table" \ -u "Top" \ - -n "Timing Specification" wksheets.t -CLEANFILES += wksheets.t + -n "Timing Specification" > $@ # Timing Specification Chapter: # 1. Copy the Shared File # 3. Build Node Structure -timing.texi: $(top_srcdir)/common/timing.t +$(srcdir)/timing.texi: $(top_srcdir)/common/timing.t $(BMENU2) -p "Memory Requirements RTEMS RAM Workspace Worksheet" \ -u "Top" \ -n "MYBSP Timing Data" < $< > $@ @@ -94,17 +93,16 @@ timing.texi: $(top_srcdir)/common/timing.t # 2. Replace Times and Sizes # 3. Build Node Structure -timeBSP.texi: $(top_srcdir)/common/timetbl.t timeBSP.t +$(srcdir)/timeBSP.texi: $(top_srcdir)/common/timetbl.t timeBSP.t cat timeBSP.t $(top_srcdir)/common/timetbl.t >timeBSP_.t @echo >>timeBSP_.t @echo "@tex" >>timeBSP_.t @echo "\\global\\advance \\smallskipamount by 4pt" >>timeBSP_.t @echo "@end tex" >>timeBSP_.t - ${REPLACE2} -p BSP_TIMES timeBSP_.t timeBSP_.t - $(BMENU) -p "Timing Specification Terminology" \ + ${REPLACE2} -p BSP_TIMES timeBSP_.t | \ + $(BMENU2) -p "Timing Specification Terminology" \ -u "Top" \ - -n "Command and Variable Index" timeBSP_.t - mv timeBSP_.texi timeBSP.texi -CLEANFILES += timeBSP_.t timeBSP_.texi + -n "Command and Variable Index" > $@ +CLEANFILES += timeBSP_.t EXTRA_DIST = BSP_TIMES *.t diff --git a/doc/supplements/template/stamp-vti b/doc/supplements/template/stamp-vti new file mode 100644 index 0000000000..27e5ccd0cb --- /dev/null +++ b/doc/supplements/template/stamp-vti @@ -0,0 +1,3 @@ +@set UPDATED 1 June 2000 +@set EDITION 1 +@set VERSION 4.5.0-beta3 diff --git a/doc/supplements/template/template.texi b/doc/supplements/template/template.texi index ce9e950f17..3cb9bfd02d 100644 --- a/doc/supplements/template/template.texi +++ b/doc/supplements/template/template.texi @@ -19,27 +19,20 @@ @c Master file for the Template Applications Supplement @c +@include version.texi @include ../../common/setup.texi -@ignore -@ifinfo -@format -START-INFO-DIR-ENTRY -* RTEMS Template Applications Supplement (template): -END-INFO-DIR-ENTRY -@end format -@end ifinfo -@end ignore +@ifset use-ascii +@dircategory RTEMS Target Supplements +@direntry +* RTEMS Template Applications Supplement: (template). +@end direntry +@end ifset @c @c Title Page Stuff @c -@set edition @value{RTEMS-EDITION} -@set version @value{RTEMS-VERSION} -@set update-date @value{RTEMS-UPDATE-DATE} -@set update-month @value{RTEMS-UPDATE-MONTH} - @c @c I don't really like having a short title page. --joel @c @@ -51,9 +44,9 @@ END-INFO-DIR-ENTRY @finalout @title RTEMS Template Applications Supplement -@subtitle Edition @value{edition}, for RTEMS @value{version} +@subtitle Edition @value{EDITION}, for RTEMS @value{VERSION} @sp 1 -@subtitle @value{update-month} +@subtitle @value{UPDATED} @author On-Line Applications Research Corporation @page diff --git a/doc/supplements/template/version.texi b/doc/supplements/template/version.texi new file mode 100644 index 0000000000..27e5ccd0cb --- /dev/null +++ b/doc/supplements/template/version.texi @@ -0,0 +1,3 @@ +@set UPDATED 1 June 2000 +@set EDITION 1 +@set VERSION 4.5.0-beta3 |