Renamed

3 files changed, 0 insertions, 1671 deletions

diff --git a/doc/supplements/powerpc/timedata.t b/doc/supplements/powerpc/timedata.t
deleted file mode 100644
index f5ea26e7fc..0000000000
--- a/doc/supplements/powerpc/timedata.t
+++ /dev/null
@@ -1,142 +0,0 @@
-@c
-@c  Timing information for PSIM
-@c
-@c  COPYRIGHT (c) 1988-1998.
-@c  On-Line Applications Research Corporation (OAR).
-@c  All rights reserved.
-@c
-@c  $Id$
-@c
-
-@include ../../common/timemac.texi
-@tex
-\global\advance \smallskipamount by -4pt
-@end tex
-
-@ifinfo
-@node RTEMS_BSP Timing Data, RTEMS_BSP Timing Data Introduction, Timing Specification Terminology, Top
-@end ifinfo
-@chapter RTEMS_BSP Timing Data
-@ifinfo
-@menu
-* RTEMS_BSP Timing Data Introduction::
-* RTEMS_BSP Timing Data Hardware Platform::
-* RTEMS_BSP Timing Data Interrupt Latency::
-* RTEMS_BSP Timing Data Context Switch::
-* RTEMS_BSP Timing Data Directive Times::
-* RTEMS_BSP Timing Data Task Manager::
-* RTEMS_BSP Timing Data Interrupt Manager::
-* RTEMS_BSP Timing Data Clock Manager::
-* RTEMS_BSP Timing Data Timer Manager::
-* RTEMS_BSP Timing Data Semaphore Manager::
-* RTEMS_BSP Timing Data Message Manager::
-* RTEMS_BSP Timing Data Event Manager::
-* RTEMS_BSP Timing Data Signal Manager::
-* RTEMS_BSP Timing Data Partition Manager::
-* RTEMS_BSP Timing Data Region Manager::
-* RTEMS_BSP Timing Data Dual-Ported Memory Manager::
-* RTEMS_BSP Timing Data I/O Manager::
-* RTEMS_BSP Timing Data Rate Monotonic Manager::
-@end menu
-@end ifinfo
-
-@ifinfo
-@node RTEMS_BSP Timing Data Introduction, RTEMS_BSP Timing Data Hardware Platform, RTEMS_BSP Timing Data, RTEMS_BSP Timing Data
-@end ifinfo
-@section Introduction
-
-The timing data for RTEMS on the RTEMS_BSP target 
-is provided along with the target
-dependent aspects concerning the gathering of the timing data.
-The hardware platform used to gather the times is described to
-give the reader a better understanding of each directive time
-provided.  Also, provided is a description of the interrupt
-latency and the context switch times as they pertain to the
-PowerPC version of RTEMS.
-
-@ifinfo
-@node RTEMS_BSP Timing Data Hardware Platform, RTEMS_BSP Timing Data Interrupt Latency, RTEMS_BSP Timing Data Introduction, RTEMS_BSP Timing Data
-@end ifinfo
-@section Hardware Platform
-
-All times reported in this chapter were measured using the PowerPC
-Instruction Simulator (PSIM). PSIM simulates a variety of PowerPC
-6xx models with the PPC603e being used as the basis for the measurements
-reported in this chapter.
-
-The PowerPC decrementer register was was used to gather
-all timing information.  In real hardware implementations
-of the PowerPC architecture, this register would typically
-count something like CPU cycles or be a function of the clock
-speed.  However, with PSIM each count of the decrementer register 
-represents an instruction.  Thus all measurements in this 
-chapter are reported as the actual number of instructions
-executed.  All sources of hardware interrupts were disabled,
-although traps were enabled and the interrupt level of the
-PowerPC allows all interrupts.
-
-@ifinfo
-@node RTEMS_BSP Timing Data Interrupt Latency, RTEMS_BSP Timing Data Context Switch, RTEMS_BSP Timing Data Hardware Platform, RTEMS_BSP Timing Data
-@end ifinfo
-@section Interrupt Latency
-
-The maximum period with traps disabled or the
-processor interrupt level set to it's highest value inside RTEMS
-is less than RTEMS_MAXIMUM_DISABLE_PERIOD
-microseconds including the instructions which
-disable and re-enable interrupts.  The time required for the
-PowerPC to vector an interrupt and for the RTEMS entry overhead
-before invoking the user's trap handler are a total of 
-RTEMS_INTR_ENTRY_RETURNS_TO_PREEMPTING_TASK
-microseconds.  These combine to yield a worst case interrupt
-latency of less than RTEMS_MAXIMUM_DISABLE_PERIOD +
-RTEMS_INTR_ENTRY_RETURNS_TO_PREEMPTING_TASK microseconds at 
-RTEMS_MAXIMUM_DISABLE_PERIOD_MHZ Mhz.
-[NOTE:  The maximum period with interrupts disabled was last
-determined for Release RTEMS_RELEASE_FOR_MAXIMUM_DISABLE_PERIOD.]
-
-The maximum period with interrupts disabled within
-RTEMS is hand-timed with some assistance from RTEMS_BSP.  The maximum
-period with interrupts disabled with RTEMS occurs was not measured
-on this target.
-
-The interrupt vector and entry overhead time was
-generated on the RTEMS_BSP benchmark platform using the PowerPC's
-decrementer register.  This register was programmed to generate
-an interrupt after one countdown.
-
-@ifinfo
-@node RTEMS_BSP Timing Data Context Switch, RTEMS_BSP Timing Data Directive Times, RTEMS_BSP Timing Data Interrupt Latency, RTEMS_BSP Timing Data
-@end ifinfo
-@section Context Switch
-
-The RTEMS processor context switch time is RTEMS_NO_FP_CONTEXTS
-instructions on the RTEMS_BSP benchmark platform when no floating
-point context is saved or restored.  Additional execution time
-is required when a TASK_SWITCH user extension is configured.
-The use of the TASK_SWITCH extension is application dependent.
-Thus, its execution time is not considered part of the raw
-context switch time.
-
-Since RTEMS was designed specifically for embedded
-missile applications which are floating point intensive, the
-executive is optimized to avoid unnecessarily saving and
-restoring the state of the numeric coprocessor.  The state of
-the numeric coprocessor is only saved when an FLOATING_POINT
-task is dispatched and that task was not the last task to
-utilize the coprocessor.  In a system with only one
-FLOATING_POINT task, the state of the numeric coprocessor will
-never be saved or restored.  When the first FLOATING_POINT task
-is dispatched, RTEMS does not need to save the current state of
-the numeric coprocessor.
-
-The following table summarizes the context switch
-times for the RTEMS_BSP benchmark platform:
-
-@include timetbl.texi
-
-@tex
-\global\advance \smallskipamount by 4pt
-@end tex
-
-
diff --git a/doc/supplements/powerpc/timedatadmv177.t b/doc/supplements/powerpc/timedatadmv177.t
deleted file mode 100644
index b811a210d0..0000000000
--- a/doc/supplements/powerpc/timedatadmv177.t
+++ /dev/null
@@ -1,157 +0,0 @@
-@c
-@c  Timing information for the DMV177
-@c
-@c  COPYRIGHT (c) 1988-1998.
-@c  On-Line Applications Research Corporation (OAR).
-@c  All rights reserved.
-@c
-@c  $Id$
-@c
-
-@include ../../common/timemac.texi
-@tex
-\global\advance \smallskipamount by -4pt
-@end tex
-
-@ifinfo
-@node RTEMS_BSP Timing Data, RTEMS_BSP Timing Data Introduction, PSIM Timing Data Rate Monotonic Manager, Top
-@end ifinfo
-@chapter RTEMS_BSP Timing Data
-@ifinfo
-@menu
-* RTEMS_BSP Timing Data Introduction::
-* RTEMS_BSP Timing Data Hardware Platform::
-* RTEMS_BSP Timing Data Interrupt Latency::
-* RTEMS_BSP Timing Data Context Switch::
-* RTEMS_BSP Timing Data Directive Times::
-* RTEMS_BSP Timing Data Task Manager::
-* RTEMS_BSP Timing Data Interrupt Manager::
-* RTEMS_BSP Timing Data Clock Manager::
-* RTEMS_BSP Timing Data Timer Manager::
-* RTEMS_BSP Timing Data Semaphore Manager::
-* RTEMS_BSP Timing Data Message Manager::
-* RTEMS_BSP Timing Data Event Manager::
-* RTEMS_BSP Timing Data Signal Manager::
-* RTEMS_BSP Timing Data Partition Manager::
-* RTEMS_BSP Timing Data Region Manager::
-* RTEMS_BSP Timing Data Dual-Ported Memory Manager::
-* RTEMS_BSP Timing Data I/O Manager::
-* RTEMS_BSP Timing Data Rate Monotonic Manager::
-@end menu
-@end ifinfo
-
-@ifinfo
-@node RTEMS_BSP Timing Data Introduction, RTEMS_BSP Timing Data Hardware Platform, RTEMS_BSP Timing Data, RTEMS_BSP Timing Data
-@end ifinfo
-@section Introduction
-
-The timing data for RTEMS on the DY-4 RTEMS_BSP board
-is provided along with the target
-dependent aspects concerning the gathering of the timing data.
-The hardware platform used to gather the times is described to
-give the reader a better understanding of each directive time
-provided.  Also, provided is a description of the interrupt
-latency and the context switch times as they pertain to the
-PowerPC version of RTEMS.
-
-@ifinfo
-@node RTEMS_BSP Timing Data Hardware Platform, RTEMS_BSP Timing Data Interrupt Latency, RTEMS_BSP Timing Data Introduction, RTEMS_BSP Timing Data
-@end ifinfo
-@section Hardware Platform
-
-All times reported in this chapter were measured using a RTEMS_BSP board.
-All data and code caching was disabled.  This results in very deterministic
-times which represent the worst possible performance.  Many embedded 
-applications disable caching to insure that execution times are
-repeatable.  Moreover, the JTAG port on certain revisions of the PowerPC
-603e does not operate properly if caching is enabled.  Thus during 
-development and debug, caching must be off.
-
-The PowerPC decrementer register was was used to gather
-all timing information.  In the PowerPC architecture,
-this register typically counts
-something like CPU cycles or is a function of the clock
-speed.  On the PPC603e decrements once for every four (4) bus cycles.
-On the RTEMS_BSP, the bus operates at a clock speed of 
-33 Mhz.  This result in a very accurate number since it is a function of the 
-microprocessor itself.  Thus all measurements in this 
-chapter are reported as the actual number of decrementer
-clicks reported.  
-
-To convert the numbers reported to microseconds, one should
-divide the number reported by 8.650752.  This number was derived as
-shown below:
-
-@example
-((33 * 1048576) / 1000000) / 4 = 8.650752
-@end example
-
-All sources of hardware interrupts were disabled,
-although traps were enabled and the interrupt level of the
-PowerPC allows all interrupts.
-
-@ifinfo
-@node RTEMS_BSP Timing Data Interrupt Latency, RTEMS_BSP Timing Data Context Switch, RTEMS_BSP Timing Data Hardware Platform, RTEMS_BSP Timing Data
-@end ifinfo
-@section Interrupt Latency
-
-The maximum period with traps disabled or the
-processor interrupt level set to it's highest value inside RTEMS
-is less than RTEMS_MAXIMUM_DISABLE_PERIOD
-microseconds including the instructions which
-disable and re-enable interrupts.  The time required for the
-PowerPC to vector an interrupt and for the RTEMS entry overhead
-before invoking the user's trap handler are a total of 
-RTEMS_INTR_ENTRY_RETURNS_TO_PREEMPTING_TASK
-microseconds.  These combine to yield a worst case interrupt
-latency of less than RTEMS_MAXIMUM_DISABLE_PERIOD +
-RTEMS_INTR_ENTRY_RETURNS_TO_PREEMPTING_TASK microseconds at 
-RTEMS_MAXIMUM_DISABLE_PERIOD_MHZ Mhz.
-[NOTE:  The maximum period with interrupts disabled was last
-determined for Release RTEMS_RELEASE_FOR_MAXIMUM_DISABLE_PERIOD.]
-
-The maximum period with interrupts disabled within
-RTEMS is hand-timed with some assistance from the PowerPC simulator.
-The maximum period with interrupts disabled with RTEMS has not
-been calculated on this target.
-
-The interrupt vector and entry overhead time was
-generated on the PSIM benchmark platform using the PowerPC's
-decrementer register.  This register was programmed to generate
-an interrupt after one countdown.
-
-@ifinfo
-@node RTEMS_BSP Timing Data Context Switch, RTEMS_BSP Timing Data Directive Times, RTEMS_BSP Timing Data Interrupt Latency, RTEMS_BSP Timing Data
-@end ifinfo
-@section Context Switch
-
-The RTEMS processor context switch time is RTEMS_NO_FP_CONTEXTS
-bus cycle on the RTEMS_BSP benchmark platform when no floating
-point context is saved or restored.  Additional execution time
-is required when a TASK_SWITCH user extension is configured.
-The use of the TASK_SWITCH extension is application dependent.
-Thus, its execution time is not considered part of the raw
-context switch time.
-
-Since RTEMS was designed specifically for embedded
-missile applications which are floating point intensive, the
-executive is optimized to avoid unnecessarily saving and
-restoring the state of the numeric coprocessor.  The state of
-the numeric coprocessor is only saved when an FLOATING_POINT
-task is dispatched and that task was not the last task to
-utilize the coprocessor.  In a system with only one
-FLOATING_POINT task, the state of the numeric coprocessor will
-never be saved or restored.  When the first FLOATING_POINT task
-is dispatched, RTEMS does not need to save the current state of
-the numeric coprocessor.
-
-The following table summarizes the context switch
-times for the RTEMS_BSP benchmark platform:
-
-@include timetbldmv177.texi
-
-@tex
-\global\advance \smallskipamount by 4pt
-@end tex
-
-
diff --git a/doc/supplements/powerpc/timetbldmv177.t b/doc/supplements/powerpc/timetbldmv177.t
deleted file mode 100644
index 4cceb0b770..0000000000
--- a/doc/supplements/powerpc/timetbldmv177.t
+++ /dev/null
@@ -1,1372 +0,0 @@
-@c ******   This comment is here to remind you not to edit the timetbl.t
-@c ******   in any directory but common.
-@c 
-@c Time Table Template
-@c
-@c  COPYRIGHT (c) 1988-1998.
-@c  On-Line Applications Research Corporation (OAR).
-@c  All rights reserved.
-@c
-@c  $Id$
-@c
-
-@ifset use-tex
-@sp 1
-@tex
-\centerline{\vbox{\offinterlineskip\halign{
-\span\rtemstimetable
-\rtemsonecase{No Floating Point Contexts}{RTEMS_NO_FP_CONTEXTS}
-\rtemsdirective{Floating Point Contexts}
-\rtemscase{restore first FP task}{RTEMS_RESTORE_1ST_FP_TASK}
-\rtemscase{save initialized, restore initialized}{RTEMS_SAVE_INIT_RESTORE_INIT}
-\rtemscase{save idle, restore initialized}{RTEMS_SAVE_IDLE_RESTORE_INIT}
-\rtemscase{save idle, restore idle}{RTEMS_SAVE_IDLE_RESTORE_IDLE}
-\rtemsendtimetable
-}}\hfil}
-@end tex
-@end ifset
-
-@ifset use-ascii
-@ifinfo
-@itemize @bullet
-@item No Floating Point Contexts
-@itemize -
-@item only case: RTEMS_NO_FP_CONTEXTS
-@end itemize
-@item Floating Point Contexts
-@itemize -
-@item restore first FP task: RTEMS_RESTORE_1ST_FP_TASK
-@item save initialized, restore initialized: RTEMS_SAVE_INIT_RESTORE_INIT
-@item save idle, restore initialized: RTEMS_SAVE_IDLE_RESTORE_INIT
-@item save idle, restore idle: RTEMS_SAVE_IDLE_RESTORE_INIT
-@end itemize
-@end itemize
-@end ifinfo
-@end ifset
-
-@ifset use-html
-@html
-<CENTER>
-  <TABLE COLS=2 WIDTH="80%" BORDER=2>
-<TR><TD ALIGN=left><STRONG>No Floating Point Contexts</STRONG></TD>
-    <TD ALIGN=center>RTEMS_NO_FP_CONTEXTS</TD></TR>
-<TR><TD ALIGN=left COLSPAN=2><STRONG>Floating Point Contexts</TR>
-    <TR><TD ALIGN=left><dd>restore first FP task</TD>
-        <TD ALIGN=center>RTEMS_RESTORE_1ST_FP_TASK</TD>
-    <TR><TD ALIGN=left><dd>save initialized, restore initialized</TD>
-        <TD ALIGN=center>RTEMS_SAVE_INIT_RESTORE_INIT</TD>
-    <TR><TD ALIGN=left><dd>save idle, restore initialized</TD>
-        <TD ALIGN=center>RTEMS_SAVE_IDLE_RESTORE_INIT</TD>
-    <TR><TD ALIGN=left><dd>save idle, restore idle</TD>
-        <TD ALIGN=center>RTEMS_SAVE_IDLE_RESTORE_IDLE</TD>
-  </TABLE>
-</CENTER>
-@end html
-@end ifset
-
-@ifinfo
-@node RTEMS_BSP Timing Data Directive Times, RTEMS_BSP Timing Data Task Manager, RTEMS_BSP Timing Data Context Switch, RTEMS_BSP Timing Data
-@end ifinfo
-@section Directive Times
-
-This sections is divided into a number of
-subsections, each of which contains a table listing the
-execution times of that manager's directives.
-
-@page
-@ifinfo
-@node RTEMS_BSP Timing Data Task Manager, RTEMS_BSP Timing Data Interrupt Manager, RTEMS_BSP Timing Data Directive Times, RTEMS_BSP Timing Data
-@end ifinfo
-@section Task Manager
-
-@ifset use-tex
-@tex
-\centerline{\vbox{\offinterlineskip\halign{
-\span\rtemstimetable
-\rtemsonecase{TASK\_CREATE}{RTEMS_TASK_CREATE_ONLY}
-\rtemsonecase{TASK\_IDENT}{RTEMS_TASK_IDENT_ONLY}
-\rtemsonecase{TASK\_START}{RTEMS_TASK_START_ONLY}
-\rtemsdirective{TASK\_RESTART}
-\rtemscase{calling task}{RTEMS_TASK_RESTART_CALLING_TASK}
-\rtemscase{suspended task -- returns to caller}
-              {RTEMS_TASK_RESTART_SUSPENDED_RETURNS_TO_CALLER}
-\rtemscase{blocked task -- returns to caller}
-              {RTEMS_TASK_RESTART_BLOCKED_RETURNS_TO_CALLER}
-\rtemscase{ready task -- returns to caller}
-              {RTEMS_TASK_RESTART_READY_RETURNS_TO_CALLER}
-\rtemscase{suspended task -- preempts caller}
-              {RTEMS_TASK_RESTART_SUSPENDED_PREEMPTS_CALLER}
-\rtemscase{blocked task -- preempts caller}
-              {RTEMS_TASK_RESTART_BLOCKED_PREEMPTS_CALLER}
-\rtemscase{ready task -- preempts caller}
-              {RTEMS_TASK_RESTART_READY_PREEMPTS_CALLER}
-\rtemsdirective{TASK\_DELETE}
-\rtemscase{calling task}{RTEMS_TASK_DELETE_CALLING_TASK}
-\rtemscase{suspended task}{RTEMS_TASK_DELETE_SUSPENDED_TASK}
-\rtemscase{blocked task}{RTEMS_TASK_DELETE_BLOCKED_TASK}
-\rtemscase{ready task}{RTEMS_TASK_DELETE_READY_TASK}
-\rtemsdirective{TASK\_SUSPEND}
-\rtemscase{calling task}{RTEMS_TASK_SUSPEND_CALLING_TASK}
-\rtemscase{returns to caller}{RTEMS_TASK_SUSPEND_RETURNS_TO_CALLER}
-\rtemsdirective{TASK\_RESUME}
-\rtemscase{task readied -- returns to caller}
-              {RTEMS_TASK_RESUME_TASK_READIED_RETURNS_TO_CALLER}
-\rtemscase{task readied -- preempts caller}
-              {RTEMS_TASK_RESUME_TASK_READIED_PREEMPTS_CALLER}
-\rtemsdirective{TASK\_SET\_PRIORITY}
-\rtemscase{obtain current priority}
-              {RTEMS_TASK_SET_PRIORITY_OBTAIN_CURRENT_PRIORITY}
-\rtemscase{returns to caller}{RTEMS_TASK_SET_PRIORITY_RETURNS_TO_CALLER}
-\rtemscase{preempts caller}{RTEMS_TASK_SET_PRIORITY_PREEMPTS_CALLER}
-\rtemsdirective{TASK\_MODE}
-\rtemscase{obtain current mode}{RTEMS_TASK_MODE_OBTAIN_CURRENT_MODE}
-\rtemscase{no reschedule}{RTEMS_TASK_MODE_NO_RESCHEDULE}
-\rtemscase{reschedule -- returns to caller}
-              {RTEMS_TASK_MODE_RESCHEDULE_RETURNS_TO_CALLER}
-\rtemscase{reschedule -- preempts caller}
-              {RTEMS_TASK_MODE_RESCHEDULE_PREEMPTS_CALLER}
-\rtemsonecase{TASK\_GET\_NOTE}{RTEMS_TASK_GET_NOTE_ONLY}
-\rtemsonecase{TASK\_SET\_NOTE}{RTEMS_TASK_SET_NOTE_ONLY}
-\rtemsdirective{TASK\_WAKE\_AFTER}
-\rtemscase{yield -- returns to caller}
-              {RTEMS_TASK_WAKE_AFTER_YIELD_RETURNS_TO_CALLER}
-\rtemscase{yield -- preempts caller}
-              {RTEMS_TASK_WAKE_AFTER_YIELD_PREEMPTS_CALLER}
-\rtemsonecase{TASK\_WAKE\_WHEN}{RTEMS_TASK_WAKE_WHEN_ONLY}
-\rtemsendtimetable
-}}\hfil}
-@end tex
-@end ifset
- 
-@ifset use-ascii
-@ifinfo
-@itemize @bullet
-
-@item TASK_CREATE
-@itemize -
-@item only case: RTEMS_TASK_CREATE_ONLY
-@end itemize
-
-@item TASK_IDENT
-@itemize -
-@item only case: RTEMS_TASK_IDENT_ONLY
-@end itemize
-
-@item TASK_START
-@itemize -
-@item only case: RTEMS_TASK_START_ONLY
-@end itemize
-
-@item TASK_RESTART
-@itemize -
-@item calling task: RTEMS_TASK_RESTART_CALLING_TASK
-@item suspended task -- returns to caller: RTEMS_TASK_RESTART_SUSPENDED_RETURNS_TO_CALLER
-@item blocked task -- returns to caller: RTEMS_TASK_RESTART_BLOCKED_RETURNS_TO_CALLER
-@item ready task -- returns to caller: RTEMS_TASK_RESTART_READY_RETURNS_TO_CALLER
-@item suspended task -- preempts caller: RTEMS_TASK_RESTART_SUSPENDED_PREEMPTS_CALLER
-@item blocked task -- preempts caller: RTEMS_TASK_RESTART_BLOCKED_PREEMPTS_CALLER
-@item ready task -- preempts caller: RTEMS_TASK_RESTART_READY_PREEMPTS_CALLER
-@end itemize
-
-@item TASK_DELETE
-@itemize -
-@item calling task: RTEMS_TASK_DELETE_CALLING_TASK
-@item suspended task: RTEMS_TASK_DELETE_SUSPENDED_TASK
-@item blocked task: RTEMS_TASK_DELETE_BLOCKED_TASK
-@item ready task: RTEMS_TASK_DELETE_READY_TASK
-@end itemize
-
-@item TASK_SUSPEND
-@itemize -
-@item calling task: RTEMS_TASK_SUSPEND_CALLING_TASK
-@item returns to caller: RTEMS_TASK_SUSPEND_RETURNS_TO_CALLER
-@end itemize
-
-@item TASK_RESUME
-@itemize -
-@item task readied -- returns to caller: RTEMS_TASK_RESUME_TASK_READIED_RETURNS_TO_CALLER
-@item task readied -- preempts caller: RTEMS_TASK_RESUME_TASK_READIED_PREEMPTS_CALLER
-@end itemize
-
-@item TASK_SET_PRIORITY
-@itemize -
-@item obtain current priority: RTEMS_TASK_SET_PRIORITY_OBTAIN_CURRENT_PRIORITY
-@item returns to caller: RTEMS_TASK_SET_PRIORITY_RETURNS_TO_CALLER
-@item preempts caller: RTEMS_TASK_SET_PRIORITY_PREEMPTS_CALLER
-@end itemize
-
-@item TASK_MODE
-@itemize -
-@item obtain current mode: RTEMS_TASK_MODE_OBTAIN_CURRENT_MODE
-@item no reschedule: RTEMS_TASK_MODE_NO_RESCHEDULE
-@item reschedule -- returns to caller: RTEMS_TASK_MODE_RESCHEDULE_RETURNS_TO_CALLER
-@item reschedule -- preempts caller: RTEMS_TASK_MODE_RESCHEDULE_PREEMPTS_CALLER
-@end itemize
-
-@item TASK_GET_NOTE
-@itemize -
-@item only case: RTEMS_TASK_GET_NOTE_ONLY
-@end itemize
-
-@item TASK_SET_NOTE
-@itemize -
-@item only case: RTEMS_TASK_SET_NOTE_ONLY
-@end itemize
-
-@item TASK_WAKE_AFTER
-@itemize -
-@item yield -- returns to caller: RTEMS_TASK_WAKE_AFTER_YIELD_RETURNS_TO_CALLER
-@item yield -- preempts caller: RTEMS_TASK_WAKE_AFTER_YIELD_PREEMPTS_CALLER
-@end itemize
-
-@item TASK_WAKE_WHEN
-@itemize -
-@item only case: RTEMS_TASK_WAKE_WHEN_ONLY
-@end itemize
-
-@end itemize
-@end ifinfo
-@end ifset
-
-@ifset use-html
-@html
-<CENTER>
-  <TABLE COLS=2 WIDTH="80%" BORDER=2>
-<TR><TD ALIGN=left><STRONG>TASK_CREATE</STRONG></TD>
-    <TD ALIGN=center>RTEMS_TASK_CREATE_ONLY</TD></TR>
-<TR><TD ALIGN=left><STRONG>TASK_IDENT</STRONG></TD>
-    <TD ALIGN=center>RTEMS_TASK_IDENT_ONLY</TD></TR>
-<TR><TD ALIGN=left><STRONG>TASK_START</STRONG></TD>
-    <TD ALIGN=center>RTEMS_TASK_START_ONLY</TD></TR>
-<TR><TD ALIGN=left COLSPAN=2><STRONG>TASK_RESTART</STRONG></TD></TR>
-    <TR><TD ALIGN=left><dd>calling task</TD>
-        <TD ALIGN=center>RTEMS_TASK_RESTART_CALLING_TASK</TD></TR>
-    <TR><TD ALIGN=left><dd>suspended task -- returns to caller</TD>
-        <TD ALIGN=center>RTEMS_TASK_RESTART_SUSPENDED_RETURNS_TO_CALLER</TD></TR>
-    <TR><TD ALIGN=left><dd>blocked task -- returns to caller</TD>
-        <TD ALIGN=center>RTEMS_TASK_RESTART_BLOCKED_RETURNS_TO_CALLER</TD></TR>
-    <TR><TD ALIGN=left><dd>ready task -- returns to caller</TD>
-        <TD ALIGN=center>RTEMS_TASK_RESTART_READY_RETURNS_TO_CALLER</TD></TR>
-    <TR><TD ALIGN=left><dd>suspended task -- preempts caller</TD>
-        <TD ALIGN=center>RTEMS_TASK_RESTART_SUSPENDED_PREEMPTS_CALLER</TD></TR>
-    <TR><TD ALIGN=left><dd>blocked task -- preempts caller</TD>
-        <TD ALIGN=center>RTEMS_TASK_RESTART_BLOCKED_PREEMPTS_CALLER</TD></TR>
-    <TR><TD ALIGN=left><dd>ready task -- preempts caller</TD>
-        <TD ALIGN=center>RTEMS_TASK_RESTART_READY_PREEMPTS_CALLER</TD></TR>
-<TR><TD ALIGN=left COLSPAN=2><STRONG>TASK_DELETE</STRONG></TD></TR>
-    <TR><TD ALIGN=left><dd>calling task</TD>
-        <TD ALIGN=center>RTEMS_TASK_DELETE_CALLING_TASK</TD></TR>
-    <TR><TD ALIGN=left><dd>suspended task</TD>
-        <TD ALIGN=center>RTEMS_TASK_DELETE_SUSPENDED_TASK</TD></TR>
-    <TR><TD ALIGN=left><dd>blocked task</TD>
-        <TD ALIGN=center>RTEMS_TASK_DELETE_BLOCKED_TASK</TD></TR>
-    <TR><TD ALIGN=left><dd>ready task</TD>
-        <TD ALIGN=center>RTEMS_TASK_DELETE_READY_TASK</TD></TR>
-<TR><TD ALIGN=left COLSPAN=2><STRONG>TASK_SUSPEND</STRONG></TD></TR>
-    <TR><TD ALIGN=left><dd>calling task</TD>
-        <TD ALIGN=center>RTEMS_TASK_SUSPEND_CALLING_TASK</TD></TR>
-    <TR><TD ALIGN=left><dd>returns to caller</TD>
-        <TD ALIGN=center>RTEMS_TASK_SUSPEND_RETURNS_TO_CALLER</TD></TR>
-<TR><TD ALIGN=left COLSPAN=2><STRONG>TASK_RESUME</STRONG></TD></TR>
-    <TR><TD ALIGN=left><dd>task readied -- returns to caller</TD>
-        <TD ALIGN=center>RTEMS_TASK_RESUME_TASK_READIED_RETURNS_TO_CALLER</TD></TR>
-    <TR><TD ALIGN=left><dd>task readied -- preempts caller</TD>
-        <TD ALIGN=center>RTEMS_TASK_RESUME_TASK_READIED_PREEMPTS_CALLER</TD></TR>
-<TR><TD ALIGN=left COLSPAN=2><STRONG>TASK_SET_PRIORITY</STRONG></TD></TR>
-    <TR><TD ALIGN=left><dd>obtain current priority</TD>
-        <TD ALIGN=center>RTEMS_TASK_SET_PRIORITY_OBTAIN_CURRENT_PRIORITY</TD></TR>
-    <TR><TD ALIGN=left><dd>returns to caller</TD>
-        <TD ALIGN=center>RTEMS_TASK_SET_PRIORITY_RETURNS_TO_CALLER</TD></TR>
-    <TR><TD ALIGN=left><dd>preempts caller</TD>
-        <TD ALIGN=center>RTEMS_TASK_SET_PRIORITY_PREEMPTS_CALLER</TD></TR>
-<TR><TD ALIGN=left COLSPAN=2><STRONG>TASK_MODE</STRONG></TD></TR>
-    <TR><TD ALIGN=left><dd>obtain current mode</TD>
-        <TD ALIGN=center>RTEMS_TASK_MODE_OBTAIN_CURRENT_MODE</TD></TR>
-    <TR><TD ALIGN=left><dd>no reschedule</TD>
-        <TD ALIGN=center>RTEMS_TASK_MODE_NO_RESCHEDULE</TD></TR>
-    <TR><TD ALIGN=left><dd>reschedule -- returns to caller</TD>
-        <TD ALIGN=center>RTEMS_TASK_MODE_RESCHEDULE_RETURNS_TO_CALLER</TD></TR>
-    <TR><TD ALIGN=left><dd>reschedule -- preempts caller</TD>
-        <TD ALIGN=center>RTEMS_TASK_MODE_RESCHEDULE_PREEMPTS_CALLER</TD></TR>
-<TR><TD ALIGN=left><STRONG>TASK_GET_NOTE</STRONG></TD>
-    <TD ALIGN=center>RTEMS_TASK_GET_NOTE_ONLY</TD></TR>
-<TR><TD ALIGN=left><STRONG>TASK_SET_NOTE</STRONG></TD>
-    <TD ALIGN=center>RTEMS_TASK_SET_NOTE_ONLY</TD></TR>
-<TR><TD ALIGN=left COLSPAN=2><STRONG>TASK_WAKE_AFTER</STRONG></TD></TR>
-    <TR><TD ALIGN=left><dd>yield -- returns to caller</TD>
-        <TD ALIGN=center>RTEMS_TASK_WAKE_AFTER_YIELD_RETURNS_TO_CALLER</TD></TR>
-    <TR><TD ALIGN=left><dd>yield -- preempts caller</TD>
-        <TD ALIGN=center>RTEMS_TASK_WAKE_AFTER_YIELD_PREEMPTS_CALLER</TD></TR>
-<TR><TD ALIGN=left><STRONG>TASK_WAKE_WHEN</STRONG></TD>
-    <TD ALIGN=center>RTEMS_TASK_WAKE_WHEN_ONLY</TD></TR>
-  </TABLE>
-</CENTER>
-@end html
-@end ifset
-
-@page
-@ifinfo
-@node RTEMS_BSP Timing Data Interrupt Manager, RTEMS_BSP Timing Data Clock Manager, RTEMS_BSP Timing Data Task Manager, RTEMS_BSP Timing Data
-@end ifinfo
-@section Interrupt Manager
-
-It should be noted that the interrupt entry times
-include vectoring the interrupt handler.
-
-@ifset use-tex
-@sp 1
-@tex
-\centerline{\vbox{\offinterlineskip\halign{
-\span\rtemstimetable
-\rtemsdirective{Interrupt Entry Overhead}
-\rtemscase{returns to nested interrupt}{RTEMS_INTR_ENTRY_RETURNS_TO_NESTED}
-\rtemscase{returns to interrupted task}
-              {RTEMS_INTR_ENTRY_RETURNS_TO_INTERRUPTED_TASK}
-\rtemscase{returns to preempting task}
-              {RTEMS_INTR_ENTRY_RETURNS_TO_PREEMPTING_TASK}
-\rtemsdirective{Interrupt Exit Overhead}
-\rtemscase{returns to nested interrupt}{RTEMS_INTR_EXIT_RETURNS_TO_NESTED}
-\rtemscase{returns to interrupted task}
-              {RTEMS_INTR_EXIT_RETURNS_TO_INTERRUPTED_TASK}
-\rtemscase{returns to preempting task}
-              {RTEMS_INTR_EXIT_RETURNS_TO_PREEMPTING_TASK}
-\rtemsendtimetable
-}}\hfil}
-@end tex
-@end ifset
-
-@ifset use-ascii
-@ifinfo
-@itemize @bullet
-
-@item Interrupt Entry Overhead
-@itemize -
-@item returns to nested interrupt: RTEMS_INTR_ENTRY_RETURNS_TO_NESTED
-@item returns to interrupted task: RTEMS_INTR_ENTRY_RETURNS_TO_INTERRUPTED_TASK
-@item returns to preempting task: RTEMS_INTR_ENTRY_RETURNS_TO_PREEMPTING_TASK
-@end itemize
-
-@item Interrupt Exit Overhead
-@itemize -
-@item returns to nested interrupt: RTEMS_INTR_EXIT_RETURNS_TO_NESTED
-@item returns to interrupted task: RTEMS_INTR_EXIT_RETURNS_TO_INTERRUPTED_TASK
-@item returns to preempting task: RTEMS_INTR_EXIT_RETURNS_TO_PREEMPTING_TASK
-@end itemize
-
-@end itemize
-@end ifinfo
-@end ifset
-
-@ifset use-html
-@html
-<CENTER>
-  <TABLE COLS=2 WIDTH="80%" BORDER=2>
-<TR><TD ALIGN=left COLSPAN=2><STRONG>Interrupt Entry Overhead</STRONG></TD></TR>
-    <TR><TD ALIGN=left><dd>returns to nested interrupt</TD>
-        <TD ALIGN=center>RTEMS_INTR_ENTRY_RETURNS_TO_NESTED</TD></TR>
-    <TR><TD ALIGN=left><dd>returns to interrupted task</TD>
-        <TD ALIGN=center>RTEMS_INTR_ENTRY_RETURNS_TO_INTERRUPTED_TASK</TD></TR>
-    <TR><TD ALIGN=left><dd>returns to preempting task</TD>
-        <TD ALIGN=center>RTEMS_INTR_ENTRY_RETURNS_TO_PREEMPTING_TASK</TD></TR>
-<TR><TD ALIGN=left COLSPAN=2><STRONG>Interrupt Exit Overhead</STRONG></TD></TR>
-    <TR><TD ALIGN=left><dd>returns to nested interrupt</TD>
-        <TD ALIGN=center>RTEMS_INTR_EXIT_RETURNS_TO_NESTED</TD></TR>
-    <TR><TD ALIGN=left><dd>returns to interrupted task</TD>
-        <TD ALIGN=center>RTEMS_INTR_EXIT_RETURNS_TO_INTERRUPTED_TASK</TD></TR>
-    <TR><TD ALIGN=left><dd>returns to preempting task</TD>
-        <TD ALIGN=center>RTEMS_INTR_EXIT_RETURNS_TO_PREEMPTING_TASK</TD></TR>
-  </TABLE>
-</CENTER>
-@end html
-@end ifset
-
-
-@ifinfo
-@node RTEMS_BSP Timing Data Clock Manager, RTEMS_BSP Timing Data Timer Manager, RTEMS_BSP Timing Data Interrupt Manager, RTEMS_BSP Timing Data
-@end ifinfo
-@section Clock Manager
-
-@ifset use-tex
-@tex
-\centerline{\vbox{\offinterlineskip\halign{
-\span\rtemstimetable
-\rtemsonecase{CLOCK\_SET}{RTEMS_CLOCK_SET_ONLY}
-\rtemsonecase{CLOCK\_GET}{RTEMS_CLOCK_GET_ONLY}
-\rtemsonecase{CLOCK\_TICK}{RTEMS_CLOCK_TICK_ONLY}
-\rtemsendtimetable
-}}\hfil}
-@end tex
-@end ifset
-
-@ifset use-ascii
-@ifinfo
-@itemize @bullet
-
-@item CLOCK_SET
-@itemize -
-@item only case: RTEMS_CLOCK_SET_ONLY
-@end itemize
-
-@item CLOCK_GET
-@itemize -
-@item only case: RTEMS_CLOCK_GET_ONLY
-@end itemize
-
-@item CLOCK_TICK
-@itemize -
-@item only case: RTEMS_CLOCK_TICK_ONLY
-@end itemize
-
-@end itemize
-@end ifinfo
-@end ifset
-
-@ifset use-html
-@html
-<CENTER>
-  <TABLE COLS=2 WIDTH="80%" BORDER=2>
-<TR><TD ALIGN=left><STRONG>CLOCK_SET</STRONG></TD>
-    <TD ALIGN=center>RTEMS_CLOCK_SET_ONLY</TD></TR>
-<TR><TD ALIGN=left><STRONG>CLOCK_GET</STRONG></TD>
-    <TD ALIGN=center>RTEMS_CLOCK_GET_ONLY</TD></TR>
-<TR><TD ALIGN=left><STRONG>CLOCK_TICK</STRONG></TD>
-    <TD ALIGN=center>RTEMS_CLOCK_TICK_ONLY</TD></TR>
-  </TABLE>
-</CENTER>
-@end html
-@end ifset
-
-@ifinfo
-@node RTEMS_BSP Timing Data Timer Manager, RTEMS_BSP Timing Data Semaphore Manager, RTEMS_BSP Timing Data Clock Manager, RTEMS_BSP Timing Data
-@end ifinfo
-@section Timer Manager
-
-@ifset use-tex
-@tex
-\centerline{\vbox{\offinterlineskip\halign{
-\span\rtemstimetable
-\rtemsonecase{TIMER\_CREATE}{RTEMS_TIMER_CREATE_ONLY}
-\rtemsonecase{TIMER\_IDENT}{RTEMS_TIMER_IDENT_ONLY}
-\rtemsdirective{TIMER\_DELETE}
-\rtemscase{inactive}{RTEMS_TIMER_DELETE_INACTIVE}
-\rtemscase{active}{RTEMS_TIMER_DELETE_ACTIVE}
-\rtemsdirective{TIMER\_FIRE\_AFTER}
-\rtemscase{inactive}{RTEMS_TIMER_FIRE_AFTER_INACTIVE}
-\rtemscase{active}{RTEMS_TIMER_FIRE_AFTER_ACTIVE}
-\rtemsdirective{TIMER\_FIRE\_WHEN}
-\rtemscase{inactive}{RTEMS_TIMER_FIRE_WHEN_INACTIVE}
-\rtemscase{active}{RTEMS_TIMER_FIRE_WHEN_ACTIVE}
-\rtemsdirective{TIMER\_RESET}
-\rtemscase{inactive}{RTEMS_TIMER_RESET_INACTIVE}
-\rtemscase{active}{RTEMS_TIMER_RESET_ACTIVE}
-\rtemsdirective{TIMER\_CANCEL}
-\rtemscase{inactive}{RTEMS_TIMER_CANCEL_INACTIVE}
-\rtemscase{active}{RTEMS_TIMER_CANCEL_ACTIVE}
-\rtemsendtimetable
-}}\hfil}
-@end tex
-@end ifset
-
-@ifset use-ascii
-@ifinfo
-@itemize @bullet
-
-@item TIMER_CREATE
-@itemize -
-@item only case: RTEMS_TIMER_CREATE_ONLY
-@end itemize
-
-@item TIMER_IDENT
-@itemize -
-@item only case: RTEMS_TIMER_IDENT_ONLY
-@end itemize
-
-@item TIMER_DELETE
-@itemize -
-@item inactive: RTEMS_TIMER_DELETE_INACTIVE
-@item active: RTEMS_TIMER_DELETE_ACTIVE
-@end itemize
-
-@item TIMER_FIRE_AFTER
-@itemize -
-@item inactive: RTEMS_TIMER_FIRE_AFTER_INACTIVE
-@item active: RTEMS_TIMER_FIRE_AFTER_ACTIVE
-@end itemize
-
-@item TIMER_FIRE_WHEN
-@itemize -
-@item inactive: TIMER_FIRE_WHEN_INACTIVE
-@item active: TIMER_FIRE_WHEN_ACTIVE
-@end itemize
-
-@item TIMER_RESET
-@itemize -
-@item inactive: TIMER_RESET_INACTIVE
-@item active: TIMER_RESET_ACTIVE
-@end itemize
-
-@item TIMER_CANCEL
-@itemize -
-@item inactive: TIMER_CANCEL_INACTIVE
-@item active: TIMER_CANCEL_ACTIVE
-@end itemize
-
-@end itemize
-@end ifinfo
-@end ifset
-
-@ifset use-html
-@html
-<CENTER>
-  <TABLE COLS=2 WIDTH="80%" BORDER=2>
-<TR><TD ALIGN=left><STRONG>TIMER_CREATE</STRONG></TD>
-    <TD ALIGN=center>RTEMS_TIMER_CREATE_ONLY</TD></TR>
-<TR><TD ALIGN=left><STRONG>TIMER_IDENT</STRONG></TD>
-    <TD ALIGN=center>RTEMS_TIMER_IDENT_ONLY</TD></TR>
-<TR><TD ALIGN=left COLSPAN=2><STRONG>TIMER_DELETE</STRONG></TD></TR>
-    <TR><TD ALIGN=left><dd>inactive</TD>
-        <TD ALIGN=center>RTEMS_TIMER_DELETE_INACTIVE</TD></TR>
-    <TR><TD ALIGN=left><dd>active</TD>
-        <TD ALIGN=center>RTEMS_TIMER_DELETE_ACTIVE</TD></TR>
-<TR><TD ALIGN=left COLSPAN=2><STRONG>TIMER_FIRE_AFTER</STRONG></TD></TR>
-    <TR><TD ALIGN=left><dd>inactive</TD>
-        <TD ALIGN=center>RTEMS_TIMER_FIRE_AFTER_INACTIVE</TD></TR>
-    <TR><TD ALIGN=left><dd>active</TD>
-        <TD ALIGN=center>RTEMS_TIMER_FIRE_AFTER_ACTIVE</TD></TR>
-<TR><TD ALIGN=left COLSPAN=2><STRONG>TIMER_FIRE_WHEN</STRONG></TD></TR>
-    <TR><TD ALIGN=left><dd>inactive</TD>
-        <TD ALIGN=center>RTEMS_TIMER_FIRE_WHEN_INACTIVE</TD></TR>
-    <TR><TD ALIGN=left><dd>active</TD>
-        <TD ALIGN=center>RTEMS_TIMER_FIRE_WHEN_ACTIVE</TD></TR>
-<TR><TD ALIGN=left COLSPAN=2><STRONG>TIMER_RESET</STRONG></TD></TR>
-    <TR><TD ALIGN=left><dd>inactive</TD>
-        <TD ALIGN=center>RTEMS_TIMER_RESET_INACTIVE</TD></TR>
-    <TR><TD ALIGN=left><dd>active</TD>
-        <TD ALIGN=center>RTEMS_TIMER_RESET_ACTIVE</TD></TR>
-<TR><TD ALIGN=left COLSPAN=2><STRONG>TIMER_CANCEL</STRONG></TD></TR>
-    <TR><TD ALIGN=left><dd>inactive</TD>
-        <TD ALIGN=center>RTEMS_TIMER_CANCEL_INACTIVE</TD></TR>
-    <TR><TD ALIGN=left><dd>active</TD>
-        <TD ALIGN=center>RTEMS_TIMER_CANCEL_ACTIVE</TD></TR>
-  </TABLE>
-</CENTER>
-@end html
-@end ifset
-
-@page
-@ifinfo
-@node RTEMS_BSP Timing Data Semaphore Manager, RTEMS_BSP Timing Data Message Manager, RTEMS_BSP Timing Data Timer Manager, RTEMS_BSP Timing Data
-@end ifinfo
-@section Semaphore Manager
-
-@ifset use-tex
-@tex
-\centerline{\vbox{\offinterlineskip\halign{
-\span\rtemstimetable
-\rtemsonecase{SEMAPHORE\_CREATE}{RTEMS_SEMAPHORE_CREATE_ONLY}
-\rtemsonecase{SEMAPHORE\_IDENT}{RTEMS_SEMAPHORE_IDENT_ONLY}
-\rtemsonecase{SEMAPHORE\_DELETE}{RTEMS_SEMAPHORE_DELETE_ONLY}
-\rtemsdirective{SEMAPHORE\_OBTAIN}
-\rtemscase{available}{RTEMS_SEMAPHORE_OBTAIN_AVAILABLE}
-\rtemscase{not available -- NO\_WAIT}
-              {RTEMS_SEMAPHORE_OBTAIN_NOT_AVAILABLE_NO_WAIT}
-\rtemscase{not available -- caller blocks}
-              {RTEMS_SEMAPHORE_OBTAIN_NOT_AVAILABLE_CALLER_BLOCKS}
-\rtemsdirective{SEMAPHORE\_RELEASE}
-\rtemscase{no waiting tasks}{RTEMS_SEMAPHORE_RELEASE_NO_WAITING_TASKS}
-\rtemscase{task readied -- returns to caller}
-              {RTEMS_SEMAPHORE_RELEASE_TASK_READIED_RETURNS_TO_CALLER}
-\rtemscase{task readied -- preempts caller}
-              {RTEMS_SEMAPHORE_RELEASE_TASK_READIED_PREEMPTS_CALLER}
-\rtemsendtimetable
-}}\hfil}
-@end tex
-@end ifset
-
-@ifset use-ascii
-@ifinfo
-@itemize @bullet
-
-@item SEMAPHORE_CREATE
-@itemize -
-@item only case: RTEMS_SEMAPHORE_CREATE_ONLY
-@end itemize
-
-@item SEMAPHORE_IDENT
-@itemize -
-@item only case: RTEMS_SEMAPHORE_IDENT_ONLY
-@end itemize
-
-@item SEMAPHORE_DELETE
-@itemize -
-@item only case: RTEMS_SEMAPHORE_DELETE_ONLY
-@end itemize
-
-@item SEMAPHORE_OBTAIN
-@itemize -
-@item available: RTEMS_SEMAPHORE_OBTAIN_AVAILABLE
-@item not available -- NO_WAIT: RTEMS_SEMAPHORE_OBTAIN_NOT_AVAILABLE_NO_WAIT
-@item not available -- caller blocks: RTEMS_SEMAPHORE_OBTAIN_NOT_AVAILABLE_CALLER_BLOCKS
-@end itemize
-
-@item SEMAPHORE_RELEASE
-@itemize -
-@item no waiting tasks: RTEMS_SEMAPHORE_RELEASE_NO_WAITING_TASKS
-@item task readied -- returns to caller: RTEMS_SEMAPHORE_RELEASE_TASK_READIED_RETURNS_TO_CALLER
-@item task readied -- preempts caller: RTEMS_SEMAPHORE_RELEASE_TASK_READIED_PREEMPTS_CALLER
-@end itemize
-
-@end itemize
-@end ifinfo
-@end ifset
-
-@ifset use-html
-@html
-<CENTER>
-  <TABLE COLS=2 WIDTH="80%" BORDER=2>
-<TR><TD ALIGN=left><STRONG>SEMAPHORE_CREATE</STRONG></TD>
-    <TD ALIGN=center>RTEMS_SEMAPHORE_CREATE_ONLY</TD></TR>
-<TR><TD ALIGN=left><STRONG>SEMAPHORE_IDENT</STRONG></TD>
-    <TD ALIGN=center>RTEMS_SEMAPHORE_IDENT_ONLY</TD></TR>
-<TR><TD ALIGN=left><STRONG>SEMAPHORE_DELETE</STRONG></TD>
-    <TD ALIGN=center>RTEMS_SEMAPHORE_DELETE_ONLY</TD></TR>
-<TR><TD ALIGN=left COLSPAN=2><STRONG>SEMAPHORE_OBTAIN</STRONG></TD></TR>
-    <TR><TD ALIGN=left><dd>available</TD>
-        <TD ALIGN=center>RTEMS_SEMAPHORE_OBTAIN_AVAILABLE</TD></TR>
-    <TR><TD ALIGN=left><dd>not available -- NO_WAIT</TD>
-        <TD ALIGN=center>RTEMS_SEMAPHORE_OBTAIN_NOT_AVAILABLE_NO_WAIT</TD></TR>
-    <TR><TD ALIGN=left><dd>not available -- caller blocks</TD>
-        <TD ALIGN=center>RTEMS_SEMAPHORE_OBTAIN_NOT_AVAILABLE_CALLER_BLOCKS</TD></TR>
-<TR><TD ALIGN=left COLSPAN=2><STRONG>SEMAPHORE_RELEASE</STRONG></TD></TR>
-    <TR><TD ALIGN=left><dd>no waiting tasks</TD>
-        <TD ALIGN=center>RTEMS_SEMAPHORE_RELEASE_NO_WAITING_TASKS</TD></TR>
-    <TR><TD ALIGN=left><dd>task readied -- returns to caller</TD>
-        <TD ALIGN=center>RTEMS_SEMAPHORE_RELEASE_TASK_READIED_RETURNS_TO_CALLER</TD></TR>
-    <TR><TD ALIGN=left><dd>task readied -- preempts caller</TD>
-        <TD ALIGN=center>RTEMS_SEMAPHORE_RELEASE_TASK_READIED_PREEMPTS_CALLER</TD></TR>
-  </TABLE>
-</CENTER>
-@end html
-@end ifset
-
-@ifinfo
-@node RTEMS_BSP Timing Data Message Manager, RTEMS_BSP Timing Data Event Manager, RTEMS_BSP Timing Data Semaphore Manager, RTEMS_BSP Timing Data
-@end ifinfo
-@section Message Manager
-
-@ifset use-tex
-@tex
-\centerline{\vbox{\offinterlineskip\halign{
-\span\rtemstimetable
-\rtemsonecase{MESSAGE\_QUEUE\_CREATE}{RTEMS_MESSAGE_QUEUE_CREATE_ONLY}
-\rtemsonecase{MESSAGE\_QUEUE\_IDENT}{RTEMS_MESSAGE_QUEUE_IDENT_ONLY}
-\rtemsonecase{MESSAGE\_QUEUE\_DELETE}{RTEMS_MESSAGE_QUEUE_DELETE_ONLY}
-\rtemsdirective{MESSAGE\_QUEUE\_SEND}
-\rtemscase{no waiting tasks}
-              {RTEMS_MESSAGE_QUEUE_SEND_NO_WAITING_TASKS}
-\rtemscase{task readied -- returns to caller}
-              {RTEMS_MESSAGE_QUEUE_SEND_TASK_READIED_RETURNS_TO_CALLER}
-\rtemscase{task readied -- preempts caller}
-              {RTEMS_MESSAGE_QUEUE_SEND_TASK_READIED_PREEMPTS_CALLER}
-\rtemsdirective{MESSAGE\_QUEUE\_URGENT}
-\rtemscase{no waiting tasks}{RTEMS_MESSAGE_QUEUE_URGENT_NO_WAITING_TASKS}
-\rtemscase{task readied -- returns to caller}
-              {RTEMS_MESSAGE_QUEUE_URGENT_TASK_READIED_RETURNS_TO_CALLER}
-\rtemscase{task readied -- preempts caller}
-              {RTEMS_MESSAGE_QUEUE_URGENT_TASK_READIED_PREEMPTS_CALLER}
-\rtemsdirective{MESSAGE\_QUEUE\_BROADCAST}
-\rtemscase{no waiting tasks}{RTEMS_MESSAGE_QUEUE_BROADCAST_NO_WAITING_TASKS}
-\rtemscase{task readied -- returns to caller}
-              {RTEMS_MESSAGE_QUEUE_BROADCAST_TASK_READIED_RETURNS_TO_CALLER}
-\rtemscase{task readied -- preempts caller}
-              {RTEMS_MESSAGE_QUEUE_BROADCAST_TASK_READIED_PREEMPTS_CALLER}
-\rtemsdirective{MESSAGE\_QUEUE\_RECEIVE}
-\rtemscase{available}{RTEMS_MESSAGE_QUEUE_RECEIVE_AVAILABLE}
-\rtemscase{not available -- NO\_WAIT}
-              {RTEMS_MESSAGE_QUEUE_RECEIVE_NOT_AVAILABLE_NO_WAIT}
-\rtemscase{not available -- caller blocks}
-              {RTEMS_MESSAGE_QUEUE_RECEIVE_NOT_AVAILABLE_CALLER_BLOCKS}
-\rtemsdirective{MESSAGE\_QUEUE\_FLUSH}
-\rtemscase{no messages flushed}{RTEMS_MESSAGE_QUEUE_FLUSH_NO_MESSAGES_FLUSHED}
-\rtemscase{messages flushed}{RTEMS_MESSAGE_QUEUE_FLUSH_MESSAGES_FLUSHED}
-\rtemsendtimetable
-}}\hfil}
-@end tex
-@end ifset
-
-@ifset use-ascii
-@ifinfo
-@itemize @bullet
-
-@item MESSAGE_QUEUE_CREATE
-@itemize -
-@item only case: RTEMS_MESSAGE_QUEUE_CREATE_ONLY
-@end itemize
-
-@item MESSAGE_QUEUE_IDENT
-@itemize -
-@item only case: RTEMS_MESSAGE_QUEUE_IDENT_ONLY
-@end itemize
-
-@item MESSAGE_QUEUE_DELETE
-@itemize -
-@item only case: RTEMS_MESSAGE_QUEUE_DELETE_ONLY
-@end itemize
-
-@item MESSAGE_QUEUE_SEND
-@itemize -
-@item no waiting tasks: RTEMS_MESSAGE_QUEUE_SEND_NO_WAITING_TASKS
-@item task readied -- returns to caller: RTEMS_MESSAGE_QUEUE_SEND_TASK_READIED_RETURNS_TO_CALLER
-@item task readied -- preempts caller: RTEMS_MESSAGE_QUEUE_SEND_TASK_READIED_PREEMPTS_CALLER
-@end itemize
-
-@item MESSAGE_QUEUE_URGENT
-@itemize -
-@item no waiting tasks: RTEMS_MESSAGE_QUEUE_URGENT_NO_WAITING_TASKS
-@item task readied -- returns to caller: RTEMS_MESSAGE_QUEUE_URGENT_TASK_READIED_RETURNS_TO_CALLER
-@item task readied -- preempts caller: RTEMS_MESSAGE_QUEUE_URGENT_TASK_READIED_PREEMPTS_CALLER
-@end itemize
-
-@item MESSAGE_QUEUE_BROADCAST
-@itemize -
-@item no waiting tasks: RTEMS_MESSAGE_QUEUE_BROADCAST_NO_WAITING_TASKS
-@item task readied -- returns to caller: RTEMS_MESSAGE_QUEUE_BROADCAST_TASK_READIED_RETURNS_TO_CALLER
-@item task readied -- preempts caller: RTEMS_MESSAGE_QUEUE_BROADCAST_TASK_READIED_PREEMPTS_CALLER
-@end itemize
-
-@item MESSAGE_QUEUE_RECEIVE
-@itemize -
-@item available: RTEMS_MESSAGE_QUEUE_RECEIVE_AVAILABLE
-@item not available -- NO_WAIT: RTEMS_MESSAGE_QUEUE_RECEIVE_NOT_AVAILABLE_NO_WAIT
-@item not available -- caller blocks: RTEMS_MESSAGE_QUEUE_RECEIVE_NOT_AVAILABLE_CALLER_BLOCKS
-@end itemize
-
-@item MESSAGE_QUEUE_FLUSH
-@itemize -
-@item no messages flushed: RTEMS_MESSAGE_QUEUE_FLUSH_NO_MESSAGES_FLUSHED
-@item messages flushed: RTEMS_MESSAGE_QUEUE_FLUSH_MESSAGES_FLUSHED
-@end itemize
-
-@end itemize
-@end ifinfo
-@end ifset
-
-@ifset use-html
-@html
-<CENTER>
-  <TABLE COLS=2 WIDTH="80%" BORDER=2>
-<TR><TD ALIGN=left><STRONG>MESSAGE_QUEUE_CREATE</STRONG></TD>
-    <TD ALIGN=center>RTEMS_MESSAGE_QUEUE_CREATE_ONLY</TD></TR>
-<TR><TD ALIGN=left><STRONG>MESSAGE_QUEUE_IDENT</STRONG></TD>
-    <TD ALIGN=center>RTEMS_MESSAGE_QUEUE_IDENT_ONLY</TD></TR>
-<TR><TD ALIGN=left><STRONG>MESSAGE_QUEUE_DELETE</STRONG></TD>
-    <TD ALIGN=center>RTEMS_MESSAGE_QUEUE_DELETE_ONLY</TD></TR>
-<TR><TD ALIGN=left COLSPAN=2><STRONG>MESSAGE_QUEUE_SEND</STRONG></TD></TR>
-    <TR><TD ALIGN=left><dd>no waiting tasks</TD>
-        <TD ALIGN=center>RTEMS_MESSAGE_QUEUE_SEND_NO_WAITING_TASKS</TD></TR>
-    <TR><TD ALIGN=left><dd>task readied -- returns to caller</TD>
-        <TD ALIGN=center>RTEMS_MESSAGE_QUEUE_SEND_TASK_READIED_RETURNS_TO_CALLER</TD></TR>
-    <TR><TD ALIGN=left><dd>task readied -- preempts caller</TD>
-        <TD ALIGN=center>RTEMS_MESSAGE_QUEUE_SEND_TASK_READIED_PREEMPTS_CALLER</TD></TR>
-<TR><TD ALIGN=left COLSPAN=2><STRONG>MESSAGE_QUEUE_URGENT</STRONG></TD></TR>
-    <TR><TD ALIGN=left><dd>no waiting tasks</TD>
-        <TD ALIGN=center>RTEMS_MESSAGE_QUEUE_URGENT_NO_WAITING_TASKS</TD></TR>
-    <TR><TD ALIGN=left><dd>task readied -- returns to caller</TD>
-        <TD ALIGN=center>RTEMS_MESSAGE_QUEUE_URGENT_TASK_READIED_RETURNS_TO_CALLER</TD></TR>
-    <TR><TD ALIGN=left><dd>task readied -- preempts caller</TD>
-        <TD ALIGN=center>RTEMS_MESSAGE_QUEUE_URGENT_TASK_READIED_PREEMPTS_CALLER</TD></TR>
-<TR><TD ALIGN=left COLSPAN=2><STRONG>MESSAGE_QUEUE_BROADCAST</STRONG></TD></TR>
-    <TR><TD ALIGN=left><dd>no waiting tasks</TD>
-        <TD ALIGN=center>RTEMS_MESSAGE_QUEUE_BROADCAST_NO_WAITING_TASKS</TD></TR>
-    <TR><TD ALIGN=left><dd>task readied -- returns to caller</TD>
-        <TD ALIGN=center>RTEMS_MESSAGE_QUEUE_BROADCAST_TASK_READIED_RETURNS_TO_CALLER</TD></TR>
-    <TR><TD ALIGN=left><dd>task readied -- preempts caller</TD>
-        <TD ALIGN=center>RTEMS_MESSAGE_QUEUE_BROADCAST_TASK_READIED_PREEMPTS_CALLER</TD></TR>
-<TR><TD ALIGN=left COLSPAN=2><STRONG>MESSAGE_QUEUE_RECEIVE</STRONG></TD></TR>
-    <TR><TD ALIGN=left><dd>available</TD>
-        <TD ALIGN=center>RTEMS_MESSAGE_QUEUE_RECEIVE_AVAILABLE</TD></TR>
-    <TR><TD ALIGN=left><dd>not available -- NO_WAIT</TD>
-        <TD ALIGN=center>RTEMS_MESSAGE_QUEUE_RECEIVE_NOT_AVAILABLE_NO_WAIT</TD></TR>
-    <TR><TD ALIGN=left><dd>not available -- caller blocks</TD>
-        <TD ALIGN=center>RTEMS_MESSAGE_QUEUE_RECEIVE_NOT_AVAILABLE_CALLER_BLOCKS</TD></TR>
-<TR><TD ALIGN=left COLSPAN=2><STRONG>MESSAGE_QUEUE_FLUSH</STRONG></TD></TR>
-    <TR><TD ALIGN=left><dd>no messages flushed</TD>
-        <TD ALIGN=center>RTEMS_MESSAGE_QUEUE_FLUSH_NO_MESSAGES_FLUSHED</TD></TR>
-    <TR><TD ALIGN=left><dd>messages flushed</TD>
-        <TD ALIGN=center>RTEMS_MESSAGE_QUEUE_FLUSH_MESSAGES_FLUSHED</TD></TR>
-
-  </TABLE>
-</CENTER>
-@end html
-@end ifset
-
-@page
-@ifinfo
-@node RTEMS_BSP Timing Data Event Manager, RTEMS_BSP Timing Data Signal Manager, RTEMS_BSP Timing Data Message Manager, RTEMS_BSP Timing Data
-@end ifinfo
-@section Event Manager
-
-@ifset use-tex
-@tex
-\centerline{\vbox{\offinterlineskip\halign{
-\span\rtemstimetable
-\rtemsdirective{EVENT\_SEND}
-\rtemscase{no task readied}{RTEMS_EVENT_SEND_NO_TASK_READIED}
-\rtemscase{task readied -- returns to caller}
-              {RTEMS_EVENT_SEND_TASK_READIED_RETURNS_TO_CALLER}
-\rtemscase{task readied -- preempts caller}
-              {RTEMS_EVENT_SEND_TASK_READIED_PREEMPTS_CALLER}
-\rtemsdirective{EVENT\_RECEIVE}
-\rtemscase{obtain current events}{RTEMS_EVENT_RECEIVE_OBTAIN_CURRENT_EVENTS}
-\rtemscase{available}{RTEMS_EVENT_RECEIVE_AVAILABLE}
-\rtemscase{not available -- NO\_WAIT}{RTEMS_EVENT_RECEIVE_NOT_AVAILABLE_NO_WAIT}
-\rtemscase{not available -- caller blocks}
-              {RTEMS_EVENT_RECEIVE_NOT_AVAILABLE_CALLER_BLOCKS}
-\rtemsendtimetable
-}}\hfil}
-@end tex
-@end ifset
-
-@ifset use-ascii
-@ifinfo
-@itemize @bullet
-
-@item EVENT_SEND
-@itemize -
-@item no task readied: RTEMS_EVENT_SEND_NO_TASK_READIED
-@item task readied -- returns to caller: RTEMS_EVENT_SEND_TASK_READIED_RETURNS_TO_CALLER
-@item task readied -- preempts caller: RTEMS_EVENT_SEND_TASK_READIED_PREEMPTS_CALLER
-@end itemize
-
-@item EVENT_RECEIVE
-@itemize -
-@item obtain current events: RTEMS_EVENT_RECEIVE_OBTAIN_CURRENT_EVENTS
-@item available: RTEMS_EVENT_RECEIVE_AVAILABLE
-@item not available -- NO_WAIT: RTEMS_EVENT_RECEIVE_NOT_AVAILABLE_NO_WAIT
-@item not available -- caller blocks: RTEMS_EVENT_RECEIVE_NOT_AVAILABLE_CALLER_BLOCKS
-@end itemize
-
-@end itemize
-@end ifinfo
-@end ifset
-
-@ifset use-html
-@html
-<CENTER>
-  <TABLE COLS=2 WIDTH="80%" BORDER=2>
-<TR><TD ALIGN=left COLSPAN=2><STRONG>EVENT_SEND</STRONG></TD></TR>
-    <TR><TD ALIGN=left><dd>no task readied</TD>
-        <TD ALIGN=center>RTEMS_EVENT_SEND_NO_TASK_READIED</TD></TR>
-    <TR><TD ALIGN=left><dd>task readied -- returns to caller</TD>
-        <TD ALIGN=center>RTEMS_EVENT_SEND_TASK_READIED_RETURNS_TO_CALLER</TD></TR>
-    <TR><TD ALIGN=left><dd>task readied -- preempts caller</TD>
-        <TD ALIGN=center>RTEMS_EVENT_SEND_TASK_READIED_PREEMPTS_CALLER</TD></TR>
-<TR><TD ALIGN=left COLSPAN=2><STRONG>EVENT_RECEIVE</STRONG></TD></TR>
-    <TR><TD ALIGN=left><dd>obtain current events</TD>
-        <TD ALIGN=center>RTEMS_EVENT_RECEIVE_OBTAIN_CURRENT_EVENTS</TD></TR>
-    <TR><TD ALIGN=left><dd>available</TD>
-        <TD ALIGN=center>RTEMS_EVENT_RECEIVE_AVAILABLE</TD></TR>
-    <TR><TD ALIGN=left><dd>not available -- NO_WAIT</TD>
-        <TD ALIGN=center>RTEMS_EVENT_RECEIVE_NOT_AVAILABLE_NO_WAIT</TD></TR>
-    <TR><TD ALIGN=left><dd>not available -- caller blocks</TD>
-        <TD ALIGN=center>RTEMS_EVENT_RECEIVE_NOT_AVAILABLE_CALLER_BLOCKS</TD></TR>
-
-  </TABLE>
-</CENTER>
-@end html
-@end ifset
-@ifinfo
-@node RTEMS_BSP Timing Data Signal Manager, RTEMS_BSP Timing Data Partition Manager, RTEMS_BSP Timing Data Event Manager, RTEMS_BSP Timing Data
-@end ifinfo
-@section Signal Manager
-
-@ifset use-tex
-@tex
-\centerline{\vbox{\offinterlineskip\halign{
-\span\rtemstimetable
-\rtemsonecase{SIGNAL\_CATCH}{RTEMS_SIGNAL_CATCH_ONLY}
-\rtemsdirective{SIGNAL\_SEND}
-\rtemscase{returns to caller}{RTEMS_SIGNAL_SEND_RETURNS_TO_CALLER}
-\rtemscase{signal to self}{RTEMS_SIGNAL_SEND_SIGNAL_TO_SELF}
-\rtemsdirective{EXIT ASR OVERHEAD}
-\rtemscase{returns to calling task}
-              {RTEMS_SIGNAL_EXIT_ASR_OVERHEAD_RETURNS_TO_CALLING_TASK}
-\rtemscase{returns to preempting task}
-              {RTEMS_SIGNAL_EXIT_ASR_OVERHEAD_RETURNS_TO_PREEMPTING_TASK}
-\rtemsendtimetable
-}}\hfil}
-@end tex
-@end ifset
-
-@ifset use-ascii
-@ifinfo
-@itemize @bullet
-@item SIGNAL_CATCH
-@itemize -
-@item only case: RTEMS_SIGNAL_CATCH_ONLY
-@end itemize
-
-@item SIGNAL_SEND
-@itemize -
-@item returns to caller: RTEMS_SIGNAL_SEND_RETURNS_TO_CALLER
-@item signal to self: RTEMS_SIGNAL_SEND_SIGNAL_TO_SELF
-@end itemize
-
-@item EXIT ASR OVERHEAD
-@itemize -
-@item returns to calling task: RTEMS_SIGNAL_EXIT_ASR_OVERHEAD_RETURNS_TO_CALLING_TASK
-@item returns to preempting task: RTEMS_SIGNAL_EXIT_ASR_OVERHEAD_RETURNS_TO_PREEMPTING_TASK
-@end itemize
-
-@end itemize
-@end ifinfo
-@end ifset
-
-@ifset use-html
-@html
-<CENTER>
-  <TABLE COLS=2 WIDTH="80%" BORDER=2>
-<TR><TD ALIGN=left><STRONG>SIGNAL_CATCH</STRONG></TD>
-    <TD ALIGN=center>RTEMS_SIGNAL_CATCH_ONLY</TD></TR>
-<TR><TD ALIGN=left COLSPAN=2><STRONG>SIGNAL_SEND</TD></TR>
-    <TR><TD ALIGN=left><dd>returns to caller</TD>
-        <TD ALIGN=center>RTEMS_SIGNAL_SEND_RETURNS_TO_CALLER</TD></TR>
-    <TR><TD ALIGN=left><dd>signal to self</TD>
-        <TD ALIGN=center>RTEMS_SIGNAL_SEND_SIGNAL_TO_SELF</TD></TR>
-<TR><TD ALIGN=left COLSPAN=2><STRONG>EXIT ASR OVERHEAD</TD></TR>
-    <TR><TD ALIGN=left><dd>returns to calling task</TD>
-        <TD ALIGN=center>
-          RTEMS_SIGNAL_EXIT_ASR_OVERHEAD_RETURNS_TO_CALLING_TASK</TD></TR>
-    <TR><TD ALIGN=left><dd>returns to preempting task</TD>
-        <TD ALIGN=center>
-          RTEMS_SIGNAL_EXIT_ASR_OVERHEAD_RETURNS_TO_PREEMPTING_TASK</TD></TR>
-  </TABLE>
-</CENTER>
-@end html
-@end ifset
-
-@ifinfo
-@node RTEMS_BSP Timing Data Partition Manager, RTEMS_BSP Timing Data Region Manager, RTEMS_BSP Timing Data Signal Manager, RTEMS_BSP Timing Data
-@end ifinfo
-@section Partition Manager
-
-@ifset use-tex
-@tex
-\centerline{\vbox{\offinterlineskip\halign{
-\span\rtemstimetable
-\rtemsonecase{PARTITION\_CREATE}{RTEMS_PARTITION_CREATE_ONLY}
-\rtemsonecase{PARTITION\_IDENT}{RTEMS_PARTITION_IDENT_ONLY}
-\rtemsonecase{PARTITION\_DELETE}{RTEMS_PARTITION_DELETE_ONLY}
-\rtemsdirective{PARTITION\_GET\_BUFFER}
-\rtemscase{available}{RTEMS_PARTITION_GET_BUFFER_AVAILABLE}
-\rtemscase{not available}{RTEMS_PARTITION_GET_BUFFER_NOT_AVAILABLE}
-\rtemsonecase{PARTITION\_RETURN\_BUFFER}
-              {RTEMS_PARTITION_GET_BUFFER_NOT_AVAILABLE}
-\rtemsendtimetable
-}}\hfil}
-@end tex
-@end ifset
-
-@ifset use-ascii
-@ifinfo
-@itemize @bullet
-
-@item PARTITION_CREATE
-@itemize -
-@item only case: RTEMS_PARTITION_CREATE_ONLY
-@end itemize
-
-@item PARTITION_IDENT
-@itemize -
-@item only case: RTEMS_PARTITION_IDENT_ONLY
-@end itemize
-
-@item PARTITION_DELETE
-@itemize -
-@item only case: RTEMS_PARTITION_DELETE_ONLY
-@end itemize
-
-@item PARTITION_GET_BUFFER
-@itemize -
-@item available: RTEMS_PARTITION_GET_BUFFER_AVAILABLE
-@item not available: RTEMS_PARTITION_GET_BUFFER_NOT_AVAILABLE
-@end itemize
-
-@item PARTITION_RETURN_BUFFER
-@itemize -
-@item only case: RTEMS_PARTITION_RETURN_BUFFER_ONLY
-@end itemize
-
-@end itemize
-@end ifinfo
-@end ifset
-
-@ifset use-html
-@html
-<CENTER>
-  <TABLE COLS=2 WIDTH="80%" BORDER=2>
-<TR><TD ALIGN=left><STRONG>PARTITION_CREATE</STRONG></TD>
-    <TD ALIGN=center>RTEMS_PARTITION_CREATE_ONLY</TD></TR>
-<TR><TD ALIGN=left><STRONG>PARTITION_IDENT</STRONG></TD>
-    <TD ALIGN=center>RTEMS_PARTITION_IDENT_ONLY</TD></TR>
-<TR><TD ALIGN=left><STRONG>PARTITION_DELETE</STRONG></TD>
-    <TD ALIGN=center>RTEMS_PARTITION_DELETE_ONLY</TD></TR>
-<TR><TD ALIGN=left COLSPAN=2><STRONG>PARTITION_GET_BUFFER</STRONG></TD></TR>
-    <TR><TD ALIGN=left><dd>available</TD>
-        <TD ALIGN=center>RTEMS_PARTITION_GET_BUFFER_AVAILABLE</TD></TR>
-    <TR><TD ALIGN=left><dd>not available</TD>
-        <TD ALIGN=center>RTEMS_PARTITION_GET_BUFFER_NOT_AVAILABLE</TD></TR>
-    <TR><TD ALIGN=left><STRONG>PARTITION_RETURN_BUFFER</STRONG></TD>
-    <TD ALIGN=center>RTEMS_PARTITION_GET_BUFFER_NOT_AVAILABLE</TD></TR>
-  </TABLE>
-</CENTER>
-@end html
-@end ifset
-
-@page
-@ifinfo
-@node RTEMS_BSP Timing Data Region Manager, RTEMS_BSP Timing Data Dual-Ported Memory Manager, RTEMS_BSP Timing Data Partition Manager, RTEMS_BSP Timing Data
-@end ifinfo
-@section Region Manager
-
-@ifset use-tex
-@tex
-\centerline{\vbox{\offinterlineskip\halign{
-\span\rtemstimetable
-\rtemsonecase{REGION\_CREATE}{RTEMS_REGION_CREATE_ONLY}
-\rtemsonecase{REGION\_IDENT}{RTEMS_REGION_IDENT_ONLY}
-\rtemsonecase{REGION\_DELETE}{RTEMS_REGION_DELETE_ONLY}
-\rtemsdirective{REGION\_GET\_SEGMENT}
-\rtemscase{available}{RTEMS_REGION_GET_SEGMENT_AVAILABLE}
-\rtemscase{not available -- NO\_WAIT}
-              {RTEMS_REGION_GET_SEGMENT_NOT_AVAILABLE_NO_WAIT}
-\rtemscase{not available -- caller blocks}
-              {RTEMS_REGION_GET_SEGMENT_NOT_AVAILABLE_CALLER_BLOCKS}
-\rtemsdirective{REGION\_RETURN\_SEGMENT}
-\rtemscase{no waiting tasks}{RTEMS_REGION_RETURN_SEGMENT_NO_WAITING_TASKS}
-\rtemscase{task readied -- returns to caller}
-              {RTEMS_REGION_RETURN_SEGMENT_TASK_READIED_RETURNS_TO_CALLER}
-\rtemscase{task readied -- preempts caller}
-              {RTEMS_REGION_RETURN_SEGMENT_TASK_READIED_PREEMPTS_CALLER}
-\rtemsendtimetable
-}}\hfil}
-@end tex
-@end ifset
-
-@ifset use-ascii
-@ifinfo
-@itemize @bullet
-
-@item REGION_CREATE
-@itemize -
-@item only case: RTEMS_REGION_CREATE_ONLY
-@end itemize
-
-@item REGION_IDENT
-@itemize -
-@item only case: RTEMS_REGION_IDENT_ONLY
-@end itemize
-
-@item REGION_DELETE
-@itemize -
-@item only case: RTEMS_REGION_DELETE_ONLY
-@end itemize
-
-@item REGION_GET_SEGMENT
-@itemize -
-@item available: RTEMS_REGION_GET_SEGMENT_AVAILABLE
-@item not available -- NO_WAIT: RTEMS_REGION_GET_SEGMENT_NOT_AVAILABLE_NO_WAIT
-@item not available -- caller blocks: RTEMS_REGION_GET_SEGMENT_NOT_AVAILABLE_CALLER_BLOCKS
-@end itemize
-
-@item REGION_RETURN_SEGMENT
-@itemize -
-@item no waiting tasks: RTEMS_REGION_RETURN_SEGMENT_NO_WAITING_TASKS
-@item task readied -- returns to caller: RTEMS_REGION_RETURN_SEGMENT_TASK_READIED_RETURNS_TO_CALLER
-@item task readied -- preempts caller: RTEMS_REGION_RETURN_SEGMENT_TASK_READIED_PREEMPTS_CALLER
-@end itemize
-
-@end itemize
-@end ifinfo
-@end ifset
-
-@ifset use-html
-@html
-<CENTER>
-  <TABLE COLS=2 WIDTH="80%" BORDER=2>
-<TR><TD ALIGN=left><STRONG>REGION_CREATE</STRONG></TD>
-    <TD ALIGN=center>RTEMS_REGION_CREATE_ONLY</TD></TR>
-<TR><TD ALIGN=left><STRONG>REGION_IDENT</STRONG></TD>
-    <TD ALIGN=center>RTEMS_REGION_IDENT_ONLY</TD></TR>
-<TR><TD ALIGN=left><STRONG>REGION_DELETE</STRONG></TD>
-    <TD ALIGN=center>RTEMS_REGION_DELETE_ONLY</TD></TR>
-<TR><TD ALIGN=left COLSPAN=2><STRONG>REGION_GET_SEGMENT</TD></TR>
-    <TR><TD ALIGN=left><dd>available</TD>
-        <TD ALIGN=center>RTEMS_REGION_GET_SEGMENT_AVAILABLE</TD></TR>
-    <TR><TD ALIGN=left><dd>not available -- NO_WAIT</TD>
-        <TD ALIGN=center>
-          RTEMS_REGION_GET_SEGMENT_NOT_AVAILABLE_NO_WAIT</TD></TR>
-    <TR><TD ALIGN=left><dd>not available -- caller blocks</TD>
-        <TD ALIGN=center>
-          RTEMS_REGION_GET_SEGMENT_NOT_AVAILABLE_CALLER_BLOCKS</TD></TR>
-<TR><TD ALIGN=left COLSPAN=2><STRONG>REGION_RETURN_SEGMENT</TD></TR>
-    <TR><TD ALIGN=left><dd>no waiting tasks</TD>
-        <TD ALIGN=center>RTEMS_REGION_RETURN_SEGMENT_NO_WAITING_TASKS</TD></TR>
-    <TR><TD ALIGN=left><dd>task readied -- returns to caller</TD>
-        <TD ALIGN=center>
-          RTEMS_REGION_RETURN_SEGMENT_TASK_READIED_RETURNS_TO_CALLER</TD></TR>
-    <TR><TD ALIGN=left><dd>task readied -- preempts caller</TD>
-        <TD ALIGN=center>
-          RTEMS_REGION_RETURN_SEGMENT_TASK_READIED_PREEMPTS_CALLER</TD></TR>
-  </TABLE>
-</CENTER>
-@end html
-@end ifset
-
-@ifinfo
-@node RTEMS_BSP Timing Data Dual-Ported Memory Manager, RTEMS_BSP Timing Data I/O Manager, RTEMS_BSP Timing Data Region Manager, RTEMS_BSP Timing Data
-@end ifinfo
-@section Dual-Ported Memory Manager
-
-@ifset use-tex
-@tex
-\centerline{\vbox{\offinterlineskip\halign{
-\span\rtemstimetable
-\rtemsonecase{PORT\_CREATE}{RTEMS_PORT_CREATE_ONLY}
-\rtemsonecase{PORT\_IDENT}{RTEMS_PORT_IDENT_ONLY}
-\rtemsonecase{PORT\_DELETE}{RTEMS_PORT_DELETE_ONLY}
-\rtemsonecase{PORT\_INTERNAL\_TO\_EXTERNAL}
-              {RTEMS_PORT_INTERNAL_TO_EXTERNAL_ONLY}
-\rtemsonecase{PORT\_EXTERNAL\_TO\_INTERNAL}
-              {RTEMS_PORT_EXTERNAL_TO_INTERNAL_ONLY}
-\rtemsendtimetable
-}}\hfil}
-@end tex
-@end ifset
-
-@ifset use-ascii
-@ifinfo
-@itemize @bullet
-
-@item PORT_CREATE
-@itemize -
-@item only case: RTEMS_PORT_CREATE_ONLY
-@end itemize
-
-@item PORT_IDENT
-@itemize -
-@item only case: RTEMS_PORT_IDENT_ONLY
-@end itemize
-
-@item PORT_DELETE
-@itemize -
-@item only case: RTEMS_PORT_DELETE_ONLY
-@end itemize
-
-@item PORT_INTERNAL_TO_EXTERNAL
-@itemize -
-@item only case: RTEMS_PORT_INTERNAL_TO_EXTERNAL_ONLY
-@end itemize
-
-@item PORT_EXTERNAL_TO_INTERNAL
-@itemize -
-@item only case: RTEMS_PORT_EXTERNAL_TO_INTERNAL_ONLY
-@end itemize
-
-@end itemize
-@end ifinfo
-@end ifset
-
-@ifset use-html
-@html
-<CENTER>
-  <TABLE COLS=2 WIDTH="80%" BORDER=2>
-<TR><TD ALIGN=left><STRONG>PORT_CREATE</STRONG></TD>
-    <TD ALIGN=center>RTEMS_PORT_CREATE_ONLY</TD></TR>
-<TR><TD ALIGN=left><STRONG>PORT_IDENT</STRONG></TD>
-    <TD ALIGN=center>RTEMS_PORT_IDENT_ONLY</TD></TR>
-<TR><TD ALIGN=left><STRONG>PORT_DELETE</STRONG></TD>
-    <TD ALIGN=center>RTEMS_PORT_DELETE_ONLY</TD></TR>
-<TR><TD ALIGN=left><STRONG>PORT_INTERNAL_TO_EXTERNAL</STRONG></TD>
-    <TD ALIGN=center>RTEMS_PORT_INTERNAL_TO_EXTERNAL_ONLY</TD></TR>
-<TR><TD ALIGN=left><STRONG>PORT_EXTERNAL_TO_INTERNAL</STRONG></TD>
-    <TD ALIGN=center>RTEMS_PORT_EXTERNAL_TO_INTERNAL_ONLY</TD></TR>
-
-  </TABLE>
-</CENTER>
-@end html
-@end ifset
-
-@ifinfo
-@node RTEMS_BSP Timing Data I/O Manager, RTEMS_BSP Timing Data Rate Monotonic Manager, RTEMS_BSP Timing Data Dual-Ported Memory Manager, RTEMS_BSP Timing Data
-@end ifinfo
-@section I/O Manager
-
-@ifset use-tex
-@tex
-\centerline{\vbox{\offinterlineskip\halign{
-\span\rtemstimetable
-\rtemsonecase{IO\_INITIALIZE}{RTEMS_IO_INITIALIZE_ONLY}
-\rtemsonecase{IO\_OPEN}{RTEMS_IO_OPEN_ONLY}
-\rtemsonecase{IO\_CLOSE}{RTEMS_IO_CLOSE_ONLY}
-\rtemsonecase{IO\_READ}{RTEMS_IO_READ_ONLY}
-\rtemsonecase{IO\_WRITE}{RTEMS_IO_WRITE_ONLY}
-\rtemsonecase{IO\_CONTROL}{RTEMS_IO_CONTROL_ONLY}
-\rtemsendtimetable
-}}\hfil}
-@end tex
-@end ifset
-
-@ifset use-ascii
-@ifinfo
-@itemize @bullet
-
-@item IO_INITIALIZE
-@itemize -
-@item only case: RTEMS_IO_INITIALIZE_ONLY
-@end itemize
-
-@item IO_OPEN
-@itemize -
-@item only case: RTEMS_IO_OPEN_ONLY
-@end itemize
-
-@item IO_CLOSE
-@itemize -
-@item only case: RTEMS_IO_CLOSE_ONLY
-@end itemize
-
-@item IO_READ
-@itemize -
-@item only case: RTEMS_IO_READ_ONLY
-@end itemize
-
-@item IO_WRITE
-@itemize -
-@item only case: RTEMS_IO_WRITE_ONLY
-@end itemize
-
-@item IO_CONTROL
-@itemize -
-@item only case: RTEMS_IO_CONTROL_ONLY
-@end itemize
-
-@end itemize
-@end ifinfo
-@end ifset
-
-@ifset use-html
-@html
-<CENTER>
-  <TABLE COLS=2 WIDTH="80%" BORDER=2>
-<TR><TD ALIGN=left><STRONG>IO_INITIALIZE</STRONG></TD>
-    <TD ALIGN=center>RTEMS_IO_INITIALIZE_ONLY</TD></TR>
-<TR><TD ALIGN=left><STRONG>IO_OPEN</STRONG></TD>
-    <TD ALIGN=center>RTEMS_IO_OPEN_ONLY</TD></TR>
-<TR><TD ALIGN=left><STRONG>IO_CLOSE</STRONG></TD>
-    <TD ALIGN=center>RTEMS_IO_CLOSE_ONLY</TD></TR>
-<TR><TD ALIGN=left><STRONG>IO_READ</STRONG></TD>
-    <TD ALIGN=center>RTEMS_IO_READ_ONLY</TD></TR>
-<TR><TD ALIGN=left><STRONG>IO_WRITE</STRONG></TD>
-    <TD ALIGN=center>RTEMS_IO_WRITE_ONLY</TD></TR>
-<TR><TD ALIGN=left><STRONG>IO_CONTROL</STRONG></TD>
-    <TD ALIGN=center>RTEMS_IO_CONTROL_ONLY</TD></TR>
-  </TABLE>
-</CENTER>
-@end html
-@end ifset
-
-@ifinfo
-@node RTEMS_BSP Timing Data Rate Monotonic Manager, Command and Variable Index, RTEMS_BSP Timing Data I/O Manager, RTEMS_BSP Timing Data
-@end ifinfo
-@section Rate Monotonic Manager
-
-@ifset use-tex
-@tex
-\centerline{\vbox{\offinterlineskip\halign{
-\span\rtemstimetable
-\rtemsonecase{RATE\_MONOTONIC\_CREATE}{RTEMS_RATE_MONOTONIC_CREATE_ONLY}
-\rtemsonecase{RATE\_MONOTONIC\_IDENT}{RTEMS_RATE_MONOTONIC_IDENT_ONLY}
-\rtemsonecase{RATE\_MONOTONIC\_CANCEL}{RTEMS_RATE_MONOTONIC_CANCEL_ONLY}
-\rtemsdirective{RATE\_MONOTONIC\_DELETE}
-\rtemscase{active}{RTEMS_RATE_MONOTONIC_DELETE_ACTIVE}
-\rtemscase{inactive}{RTEMS_RATE_MONOTONIC_DELETE_INACTIVE}
-\rtemsdirective{RATE\_MONOTONIC\_PERIOD}
-\rtemscase{initiate period -- returns to caller}
-              {RTEMS_RATE_MONOTONIC_PERIOD_INITIATE_PERIOD_RETURNS_TO_CALLER}
-\rtemscase{conclude period -- caller blocks}
-              {RTEMS_RATE_MONOTONIC_PERIOD_CONCLUDE_PERIOD_CALLER_BLOCKS}
-\rtemscase{obtain status}{RTEMS_RATE_MONOTONIC_PERIOD_OBTAIN_STATUS}
-\rtemsendtimetable
-}}\hfil}
-@end tex
-@end ifset
-
-@ifset use-ascii
-@ifinfo
-@itemize @bullet
-
-@item RATE_MONOTONIC_CREATE
-@itemize -
-@item only case: RTEMS_RATE_MONOTONIC_CREATE_ONLY
-@end itemize
-
-@item RATE_MONOTONIC_IDENT
-@itemize -
-@item only case: RTEMS_RATE_MONOTONIC_IDENT_ONLY
-@end itemize
-
-@item RATE_MONOTONIC_CANCEL
-@itemize -
-@item only case: RTEMS_RATE_MONOTONIC_CANCEL_ONLY
-@end itemize
-
-@item RATE_MONOTONIC_DELETE
-@itemize -
-@item active: RTEMS_RATE_MONOTONIC_DELETE_ACTIVE
-@item inactive: RTEMS_RATE_MONOTONIC_DELETE_INACTIVE
-@end itemize
-
-@item RATE_MONOTONIC_PERIOD
-@itemize -
-@item initiate period -- returns to caller: RTEMS_RATE_MONOTONIC_PERIOD_INITIATE_PERIOD_RETURNS_TO_CALLER
-@item conclude period -- caller blocks: RTEMS_RATE_MONOTONIC_PERIOD_CONCLUDE_PERIOD_CALLER_BLOCKS
-@item obtain status: RTEMS_RATE_MONOTONIC_PERIOD_OBTAIN_STATUS
-@end itemize
-
-@end itemize
-@end ifinfo
-@end ifset
-
-@ifset use-html
-@html
-<CENTER>
-  <TABLE COLS=2 WIDTH="80%" BORDER=2>
-<TR><TD ALIGN=left><STRONG>RATE_MONOTONIC_CREATE</STRONG></TD>
-    <TD ALIGN=center>RTEMS_RATE_MONOTONIC_CREATE_ONLY</TD></TR>
-<TR><TD ALIGN=left><STRONG>RATE_MONOTONIC_IDENT</STRONG></TD>
-    <TD ALIGN=center>RTEMS_RATE_MONOTONIC_IDENT_ONLY</TD></TR>
-<TR><TD ALIGN=left><STRONG>RATE_MONOTONIC_CANCEL</STRONG></TD>
-    <TD ALIGN=center>RTEMS_RATE_MONOTONIC_CANCEL_ONLY</TD></TR>
-<TR><TD ALIGN=left COLSPAN=2><STRONG>RATE_MONOTONIC_DELETE</TD></TR>
-    <TR><TD ALIGN=left><dd>active</TD>
-        <TD ALIGN=center>RTEMS_RATE_MONOTONIC_DELETE_ACTIVE</TD></TR>
-    <TR><TD ALIGN=left><dd>inactive</TD>
-        <TD ALIGN=center>RTEMS_RATE_MONOTONIC_DELETE_INACTIVE</TD></TR>
-<TR><TD ALIGN=left COLSPAN=2><STRONG>RATE_MONOTONIC_PERIOD</TD></TR>
-    <TR><TD ALIGN=left><dd>initiate period -- returns to caller</TD>
-        <TD ALIGN=center>
-         RTEMS_RATE_MONOTONIC_PERIOD_INITIATE_PERIOD_RETURNS_TO_CALLER</TD></TR>
-    <TR><TD ALIGN=left><dd>conclude period -- caller blocks</TD>
-        <TD ALIGN=center>
-         RTEMS_RATE_MONOTONIC_PERIOD_CONCLUDE_PERIOD_CALLER_BLOCKS</TD></TR>
-    <TR><TD ALIGN=left><dd>obtain status</TD>
-        <TD ALIGN=center>RTEMS_RATE_MONOTONIC_PERIOD_OBTAIN_STATUS</TD></TR>
-  </TABLE>
-</CENTER>
-@end html
-@end ifset
-
-@tex
-\global\advance \smallskipamount by 4pt
-@end tex