Renamed cputable.texi to cputable.t.

1 files changed, 0 insertions, 171 deletions

diff --git a/doc/supplements/powerpc/cputable.texi b/doc/supplements/powerpc/cputable.texi
deleted file mode 100644
index e4c2efd0ff..0000000000
--- a/doc/supplements/powerpc/cputable.texi
+++ /dev/null
@@ -1,171 +0,0 @@
-@c
-@c  COPYRIGHT (c) 1988-1998.
-@c  On-Line Applications Research Corporation (OAR).
-@c  All rights reserved.
-@c
-@c  $Id$
-@c
-
-@ifinfo
-@node Processor Dependent Information Table, Processor Dependent Information Table Introduction, Board Support Packages Processor Initialization, Top
-@end ifinfo
-@chapter Processor Dependent Information Table
-@ifinfo
-@menu
-* Processor Dependent Information Table Introduction::
-* Processor Dependent Information Table CPU Dependent Information Table::
-@end menu
-@end ifinfo
-
-@ifinfo
-@node Processor Dependent Information Table Introduction, Processor Dependent Information Table CPU Dependent Information Table, Processor Dependent Information Table, Processor Dependent Information Table
-@end ifinfo
-@section Introduction
-
-Any highly processor dependent information required
-to describe a processor to RTEMS is provided in the CPU
-Dependent Information Table.  This table is not required for all
-processors supported by RTEMS.  This chapter describes the
-contents, if any, for a particular processor type.
-
-@ifinfo
-@node Processor Dependent Information Table CPU Dependent Information Table, Memory Requirements, Processor Dependent Information Table Introduction, Processor Dependent Information Table
-@end ifinfo
-@section CPU Dependent Information Table
-
-The PowerPC version of the RTEMS CPU Dependent
-Information Table is given by the C structure definition is
-shown below:
-
-@example
-typedef struct @{
-  void       (*pretasking_hook)( void );
-  void       (*predriver_hook)( void );
-  void       (*postdriver_hook)( void );
-  void       (*idle_task)( void );
-  boolean      do_zero_of_workspace;
-  unsigned32   idle_task_stack_size;
-  unsigned32   interrupt_stack_size;
-  unsigned32   extra_mpci_receive_server_stack;
-  void *     (*stack_allocate_hook)( unsigned32 );
-  void       (*stack_free_hook)( void* );
-  /* end of fields required on all CPUs */
-
-  unsigned32   clicks_per_usec;       /* Timer clicks per microsecond */
-  void       (*spurious_handler)(unsigned32 vector, CPU_Interrupt_frame *);
-  boolean      exceptions_in_RAM;     /* TRUE if in RAM */
-
-#if defined(ppc403)
-  unsigned32   serial_per_sec;        /* Serial clocks per second */
-  boolean      serial_external_clock;
-  boolean      serial_xon_xoff;
-  boolean      serial_cts_rts;
-  unsigned32   serial_rate;
-  unsigned32   timer_average_overhead; /* in ticks */
-  unsigned32   timer_least_valid;      /* Least valid number from timer */
-#endif
-@};
-@end example
-
-@table @code
-@item pretasking_hook
-is the address of the
-user provided routine which is invoked once RTEMS initialization
-is complete but before interrupts and tasking are enabled.  This
-field may be NULL to indicate that the hook is not utilized.
-
-@item predriver_hook
-is the address of the user provided
-routine which is invoked with tasking enabled immediately before
-the MPCI and device drivers are initialized. RTEMS
-initialization is complete, interrupts and tasking are enabled,
-but no device drivers are initialized.  This field may be NULL to
-indicate that the hook is not utilized.
-
-@item postdriver_hook
-is the address of the user provided
-routine which is invoked with tasking enabled immediately after
-the MPCI and device drivers are initialized. RTEMS
-initialization is complete, interrupts and tasking are enabled,
-and the device drivers are initialized.  This field may be NULL
-to indicate that the hook is not utilized.
-
-@item idle_task
-is the address of the optional user
-provided routine which is used as the system's IDLE task.  If
-this field is not NULL, then the RTEMS default IDLE task is not
-used.  This field may be NULL to indicate that the default IDLE
-is to be used.
-
-@item do_zero_of_workspace
-indicates whether RTEMS should
-zero the Workspace as part of its initialization.  If set to
-TRUE, the Workspace is zeroed.  Otherwise, it is not.
-
-@item idle_task_stack_size
-is the size of the RTEMS idle task stack in bytes.  
-If this number is less than MINIMUM_STACK_SIZE, then the 
-idle task's stack will be MINIMUM_STACK_SIZE in byte.
-
-@item interrupt_stack_size
-is the size of the RTEMS allocated interrupt stack in bytes.
-This value must be at least as large as MINIMUM_STACK_SIZE.
-
-@item extra_mpci_receive_server_stack
-is the extra stack space allocated for the RTEMS MPCI receive server task
-in bytes.  The MPCI receive server may invoke nearly all directives and 
-may require extra stack space on some targets.
-
-@item stack_allocate_hook
-is the address of the optional user provided routine which allocates 
-memory for task stacks.  If this hook is not NULL, then a stack_free_hook
-must be provided as well.
-
-@item stack_free_hook
-is the address of the optional user provided routine which frees 
-memory for task stacks.  If this hook is not NULL, then a stack_allocate_hook
-must be provided as well.
-
-@item clicks_per_usec
-is the number of decrementer interupts that occur each microsecond.
-
-@item spurious_handler
-is the address of the
-routine which is invoked when a spurious interrupt occurs.
-
-@item exceptions_in_RAM
-indicates whether the exception vectors are located in RAM or ROM.  If 
-they are located in RAM dynamic vector installation occurs, otherwise
-it does not.
-
-@item serial_per_sec
-is a PPC403 specific field which specifies the number of clock
-ticks per second for the PPC403 serial timer.
-
-@item serial_rate
-is a PPC403 specific field which specifies the baud rate for the
-PPC403 serial port.
-
-@item serial_external_clock
-is a PPC403 specific field which indicates whether or not to mask in a 0x2 into
-the Input/Output Configuration Register (IOCR) during initialization of the
-PPC403 console.  (NOTE: This bit is defined as "reserved" 6-12?)
-
-@item serial_xon_xoff
-is a PPC403 specific field which indicates whether or not
-XON/XOFF flow control is supported for the PPC403 serial port.
-
-@item serial_cts_rts
-is a PPC403 specific field which indicates whether or not to set the 
-least significant bit of the Input/Output Configuration Register
-(IOCR) during initialization of the PPC403 console.  (NOTE: This
-bit is defined as "reserved" 6-12?)
-
-@item timer_average_overhead
-is a PPC403 specific field which specifies the average number of overhead ticks that occur on the PPC403 timer.
-
-@item timer_least_valid
-is a PPC403 specific field which specifies the maximum valid PPC403 timer value.
-
-@end table
-