2008-03-29 Chris Johns <chrisj@rtems.org>

	* networking/testing.t: Cleaned up the patch from Ian.

1 files changed, 32 insertions, 20 deletions

diff --git a/doc/networking/testing.t b/doc/networking/testing.t
index 6e41c42e06..fa7c78d38a 100644
--- a/doc/networking/testing.t
+++ b/doc/networking/testing.t
@@ -106,9 +106,11 @@ is a list of them:
 This command shows the current routing information for the TCP/IP stack. Following is an 
 example showing the output of this command.
 
-@code{Destination     Gateway/Mask/Hw    Flags     Refs     Use Expire Interface
+@example
+Destination     Gateway/Mask/Hw    Flags     Refs     Use Expire Interface
 10.0.0.0        255.0.0.0          U           0        0     17 smc1
-127.0.0.1       127.0.0.1          UH          0        0      0 lo0}
+127.0.0.1       127.0.0.1          UH          0        0      0 lo0
+@end example
 
 In this example, there is only one network interface with an IP address of 10.8.1.1.  This
 link is currently not up.
@@ -118,48 +120,58 @@ loopback interface (127.0.0.1).
 
 Since the stack comes from BSD, this command is very similar to the netstat command.  For more
 details on the network routing please look the following 
-URL: (@code{http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/network-routing.html})
+URL: (@url{http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/network-routing.html})
 
 For a quick reference to the flags, see the table below:
 
-U	Up: The route is active.
-H	Host: The route destination is a single host.
-G	Gateway: Send anything for this destination on to this remote
-	system, which will figure out from there where to send it.
-S	Static: This route was configured manually, not automatically
-	generated by the system.
-C	Clone: Generates a new route based upon this route for machines
-	we connect to. This type of route is normally used for local
-	networks.
-W	WasCloned: Indicated a route that was auto-configured based upon
-	a local area network (Clone) route.
-L	Link: Route involves references to Ethernet hardware.
+@table @samp
+@item U
+Up: The route is active.
+@item H
+Host: The route destination is a single host.
+@item G
+Gateway: Send anything for this destination on to this remote system, which
+will figure out from there where to send it.
+@item S
+Static: This route was configured manually, not automatically generated by the
+system.
+@item C
+Clone: Generates a new route based upon this route for machines we connect
+to. This type of route is normally used for local networks.
+@item W
+WasCloned: Indicated a route that was auto-configured based upon a local area
+network (Clone) route.
+@item L
+Link: Route involves references to Ethernet hardware.
+@end table
 
 @item @code{mbuf}
 
 This command shows the current MBUF statistics.  An example of the command is shown below:
 
-@code{************ MBUF STATISTICS ************
+@example
+************ MBUF STATISTICS ************
 mbufs:4096    clusters: 256    free: 241
 drops:   0       waits:   0  drains:   0
       free:4080          data:16          header:0           socket:0
        pcb:0           rtable:0           htable:0           atable:0
     soname:0           soopts:0           ftable:0           rights:0
     ifaddr:0          control:0          oobdata:0
-}
+@end example
 
 @item @code{if}
 
 This command shows the current statistics for your Ethernet driver as long as the ioctl hook 
 @code{SIO_RTEMS_SHOW_STATS} has been implemented.  Below is an example:
 
-@code{************ INTERFACE STATISTICS ************
+@example
+************ INTERFACE STATISTICS ************
 ***** smc1 *****
 Ethernet Address: 00:12:76:43:34:25
 Address:10.8.1.1        Broadcast Address:10.255.255.255  Net mask:255.0.0.0
 Flags: Up Broadcast Running Simplex
 Send queue limit:50   length:0    Dropped:0
-SMC91C111 RTEMS driver A0.01 11/03/2002 Ian Caddy (ianc@microsol.iinet.net.au)
+SMC91C111 RTEMS driver A0.01 11/03/2002 Ian Caddy (ianc@@microsol.iinet.net.au)
    Rx Interrupts:0              Not First:0               Not Last:0
            Giant:0                   Runt:0              Non-octet:0
          Bad CRC:0                Overrun:0              Collision:0
@@ -171,7 +183,7 @@ SMC91C111 RTEMS driver A0.01 11/03/2002 Ian Caddy (ianc@microsol.iinet.net.au)
 Address:127.0.0.1       Net mask:255.0.0.0
 Flags: Up Loopback Running Multicast
 Send queue limit:50   length:0    Dropped:0
-}
+@end example
 
 @item @code{ip}